1120

Z21 38T Driver's Aim Device

2026-05-13T12:57:00.000+08:00

Z-21

38T Driver's Aim Device

1:35 Resin

This kit contain 6 resin parts to built 2 driver's aim device

for 38T tank

Each Aim include 3 resin parts: Base, Support rod and the Top with ring.

It could be made into raised or down position as shown in photos below.

some photo of original master made in brass below

Z09 German Periscope (2026 version)

2026-02-06T23:15:00.003+08:00

Z-09 (2026)

WW2 German Periscope

1:35 Resin + PE

The 2026 version has been totally redesign, many of the original PE parts are replaced with resin parts to create much improved detail and scale thickness.

These periscopes was mostly used on WW2 German SP guns such as the Panzerjaeger 1, Marder 2, Marder 3, Narshorn.... etc. This kit contains 25 resin parts, 8 clear resin parts and numerous PE parts to fit all the model kits.

The periscope could be build into raised or lowered position as shown below.

Furthermore it could build without the periscope or without the prism

The periscope is made with 3 resin parts. The top/bottom prism in clear resin while the center case in normal resin.

The prism viewing face is made very flat and polish to resemble the glassy effect. Intricate fine details of the head rest mount is also added to the side in the 2026 new version. See photo through microscope at right

Pictures below show the periscope at Tamiya Marder 3

Z-08 German MG-34 Panzerlauf (2026 version)

2026-02-06T23:14:00.004+08:00

Z-08 2026 Version

WW2 German MG-34 Panzerlauf

1:35 Resin

The MG-34 Panzerlauf or the heavy barrel jacket is the panzer mounted version. This kit is designed to fit our panzer cupola AA mount Z-07.

The new version contains only 4 resin parts which allow everyone to build one highly detail MG-34 Panzerlauf easily.

We have combine the barrel, main gun body, shoulder stock and PE parts together to form one single casting.

Apart from general detail improvement, we have made significant improvement to the back of the shoulder stock and pistol grip as seen in photo below.

Final photo showing MG attached to AA mount from 1120production (Z-07) on Dragon Panther cupola

Z20 German Gas Mask Canister with Vehicle Mount

2023-05-04T13:03:00.000+08:00

Z-20

German Gas Mask Canister with Vehicle Mount

1:35 Resin + PE

This kit contain 16 resin parts plus PE parts to built

2 German Gas Mask Canister Vehicle Mount with or

without gas mask

The Canister is cast in one piece with details at both ends plus

a extremely detail latch. The 3 brackets are separately cast in resin

The photos below showing various view of the Canister attach to Vehicle Mount

The vehicle mount is separately cast in one piece with a PE strap

so you could choose to built the vehicle mount with or without the gas mask canister

2023-05-04T13:00:00.000+08:00

Z-10 (2023 upgrade version)

MG34

1:35 Resin + PE

This kit include one complete MG34 with drum
magazine, contain 16 resin parts, PE sling and
various PE details in 1:35 scale

The barrel and main gun body is produced as one single part while the highly detail barrel jacket (hollow cast), the front gun sight base and the bipod holding pin is also casted as one single piece.

Photos below show some of the new upgrades :

The rear of stock is remade with much sharper detail.

A new lathe hand-tuned brass lock pin with added shoulder detail

The gun sights are highly detailed, even the engraved markings at the rear gun sight is included. Furthermore both gun sights are separate parts, this not only give more realism but you could actually built it into up/down position.

The bipods

Both bipods are totally remade with crisper details and improved profile

The open leg bipod now comes with a separate top mounting bracket and locking screw, this super detail hand tuned screw eliminate any possible part line

Ammo

The drum magazine is now cast in one piece with handle where a short section of detail ammo belt will be attached. A highly detail "long" ammo belt is now included in the upgrade version with one end bend to 90 degree

If you intend to open the ammo bay, the cover inside is also fully detailed

An ammo belt start tap or section of spend ammo belt could be added as well

The sling consists of 2 PE sling, a small PE buckle at front and a beautifully made resin rear buckle, this gives you more realism than the flat PE part normally provided

Z19 Notek Light

2021-08-29T01:03:00.007+08:00

Z-19

Notek Light

1:35 Resin

This kit has 9 resin parts to built 2 Notek Light with standard mount and 1 Notek Light with Pz.Kpfw38(t) mount

Below is a fully assembled Notek Light with standard base mount & locking handle

Top View of the Light showing the tiny Notek logo faithfully reproduced

Bottom view showing the underside of the light is also fully detailed

In order to capture the exact detail/profile of the Base Mount, the original master is hand tuned in brass using a real sample as reference

Photo below showing the resin production part in comparison to the real sample

Mount for Pz.Kpfw.38(t) and its series (for all brand)

Example showing Notek Light on Tamiya Marder 3 Sdkfz139 (wire not included)

Z18 WW2 Sub Machine Gun

2020-02-28T03:39:00.001+08:00

Z-18

WW2 Sub Machine Gun

1:35 Resin

This kit contains 16 resin parts to built one PPSH, one MP40 with folded shoulder stock, one MP40 with opened shoulder stock and a MP40 vehicle mount.

PPSH
A highly detail PPSH with through holes at all sides of the barrel shroud and a separate barrel. Front and rear sight are faithfully reproduced with a micro front sight cover. Both sling brackets are also separately cast for ease of sling attachment. (Sling not included)

MP40
A highly detail MP40 with all details faithfully reproduced. Both sling bracket is cast open to ease sling attachment. Ultra fine should stock for folded and opened version. A vehicle mount is included, one piece casting with spring clip. The MP40 could simply snap on it.
This vehicle mount is seen on many SPG such as Marder 2(Sdkfz131), Marder 3(Sdkfz139), Marder 3(Sdkfz138), Nashorn...etc.

Some close up details below

The Vehicle Mount

Z-17 Mg34 (for Panzer)

2020-02-28T03:38:00.001+08:00

Z-17

Mg34 for Panzer

1:35 Resin + PE

Photo above shows Mg34 attach to Remote Control Machine Gun Mount (item Z-16).
It is hooked at rear & clamp in front like the real one.

This kit is specially produced to fit our Remote Control Mg Mount (item Z-16) but it could also be use on all other panzers as well. Contain 12 resin parts & 2 PE parts including brackets for attaching the mg to Stug mg shield.

The barrel, main gun body and ammo cover is produced as one single part. The highly detail barrel jacket (hollow cast), front gun sight base and bipod holding pin is also casted as one single piece.

Both gun sights are separate parts and could be built into up/down position.

The drum magazine is made in slide-open position with a small section of highly detail ammo.

Additional bracket and mounts are provided for attaching the Mg34 to Stug shield as shown below, replacing those from plastic kit.

Z16 Remote Control Mg Mount

2020-02-28T03:38:00.000+08:00

Z-16

Remote Control Mg Mount

1:35 Resin

Photo above shows a rear view with Hetzer shield and a front view (without shield)

This is a highly accurate resin kit with 20 resin parts & 2 resin jigs. All parts are design/reproduced according to the real gun mount using measurements taken from the Hetzer at Austria Museum. For all 1:35 scale Hetzer, Stug 3 and Stug 4.

We would like to specially thank Mr. Kaminsky Georg-Lenz. Without his help this project could never be started. Georg not just help us to do the measuring but take a lot of patience to contact/liaise with the Museum.

Photo above shows the Main Cradle Assembly which includes a workable clamp with locking pin, control rod mount in front. The cradle with hooks at rear for mounting the Mg34 as the real thing. An accurate/detail trigger assembly is also included.

Various overall views of gun mount without shield.

The control rods and periscope details are shown below. The control rod has different shapes: round rod at right and a flat bar at left.

Two different shields are included: Hetzer and Stug.

Below is a view showing the mount with Mg34 attached.

The Mg34 is from item Z-17, specially produced for this mount and other panzers.

A comparison of various mount.

2015-11-15T02:41:00.000+08:00

Z-15

Panther Flammenvernichter Muffler

1:35 Resin

This upgrade kit include 12 superbly cast resin parts
plus 28 resin fins to build 2 complete fire trap muffler.
For Dragon/Tamiya Panther ausf.G and Jadgpanther.

Our Muffler is not just having the correct number of fins but they are designed as individual fin giving the most realistic appearance. Each assembly include one delicately cast piece (with 14 fins) plus 14 individual fins.
Note:Dragon's muffler has 32 fins while Tamiya's muffler has 24 fins.

The Muffler itself is also highly detailed with ultra thin wall, faithfully reproduced collar ring details and off centre weld seam etc...

Included with the kit is the Hand Crank Guide and an accurately reproduced Rear Convoy Light.

Comparison with Dragon's muffler.

2015-10-07T23:25:00.000+08:00

Z-14

Fu2/Fu15 Radio

1:35 Resin + PE

This kit include 21 highly detail resin parts and PE parts to built into one Fu2/Fu15 radio set.

Overall view of the finished radio set, the radio has clear cover for dashboard.

Consist of only the front and rear frame, the radio frame is precisely cast in resin. Photos below showing the front and rear view of the resin radio frame (2 parts) with PE parts added.

2 different type of PE locking catch is included

The transformer - EUa is highly detail and comes with a separate base mount.

A set of connection boxes, cable sockets, socket extension and plugs are included with this kit

An extra mount is also included for stug 3 ausf.G

2015-06-20T01:14:00.000+08:00

Z-13

Fu5/Fu16 Radio (Double Frame)

1:35 Resin + PE

The Fu5 radio is the standard panzer radio, it is installed in almost every panzer, Stug III, IV, Bison 2 and many beute SP gun etc. This kit include 50 highly detail resin parts and PE parts to built into one Fu5/Fu16 radio set with horizontal double frame.

Overall view of the finished radio set.

The radios are highly detail even the clear cover for dashboard are included.

Consist of only the front and rear frame, the radio frame is precisely cast in resin. Photos below showing the bare resin radio frame (2 parts only) and the finished radio frame with PE parts added.

The highly detail transformers - U10a and EUa come with separate base mount.

Included with the kit are a full set of control box (Kasten Pz. Nr.24) , loud speaker, different types of connection box, cable sockets, socket extension and plugs.

An extra mount is also included for stug 3 ausf.G

Sample showing the radio frame and various parts inside Dragon's stug 3. Note: with scratch build conduits and wiring

2014-12-19T00:16:00.003+08:00

Z-12

Panzer Mg set (Late Version)

1:35 Resin

This kit include 8 resin parts to equip at least one panzer with Ball Mount Mg and Turret Mantlet Mg.(For all brand)

A full Mg is included for Dragon kit with the new ball mount, just simply replace it, no modification is required.

For other kit, 2 barrels with different length is included plus an extra Turret Mantlet Mg for Dragon Panther, see examples below:

Comparison and details:

2014-10-27T21:32:00.000+08:00

Z-11

MG34 Gun Shield and Pivot Mount

1:35 Resin + PE

This kit include one complete MG34 gun shield, one complete pivot mount. Contain 8 resin parts and various PE details. This mount is used on early version Sdkfz250 and Sdkfz251. (For Dragon/AFV Club/Tamiya)

Picture below shows the Mg34 from 1120production being attached, Mg34 not included .

Rear pivot mount assembly. The small gun mount itself is fully workable (tilt up/down and rotate). The mount base is constructed with 2 detail PE parts.

2012-12-21T19:27:00.001+08:00

Z-07

WW2 German MG-34 Fliegerbeschussgerät

1:35 Resin + PE
The MG-34 AA mount is widely use on german panzers - Pz3, Pz4, Panther, Tiger and King Tiger.

Kit contains 11 resin parts, 8 PE parts to built into one AA gun mount for panzer cupola. All details are faithfully reproduced, moving parts (swing arm, MG-34 mount etc...) are designed to be workable, adjust freely.

Overall views of the mount, attach to Dragon's Panther cupola

Details of the main body part, cast in one piece.

Its so detail that even the locking teeth is faithfully reproduced.

The swinging arm is also a one piece casting.
The two distinctive shaped ends are shown attached at the rear ends while the lower half of the MG-34 mount is attached to the other end.

Comparison with major plastic kit part.
Click to enlarge.

2011-08-10T01:21:00.013+08:00

Z-06

German Vehicle Rear Tow Pintle

1:35 Resin+PE

Kit contains 21 extremely detail resin parts and 2 PE chains. Kit includes 2 pintles (2 different versions) both are widely used on WW2 German vehicles and half tracks.

Version 1: 10 resin parts and one PE chain, for AFV Club Sdkfz251 series & 3 ton series; Dragon Sdkfz251 series...etc

Version 2: 11 resin parts and one PE chain, for AFV Club Sdkfz251 series & 3 ton half track; Dragon Sdkfz251 series & RSO series; Great Wall & Bronco SWS series ...etc

2011-05-06T18:33:00.023+08:00

Z-05

WW2 German RSO Road Wheel

1:35 Resin

Kit contains 8 resin road wheel for Dragon/Italeri RSO kit

The highly detailed road wheel with accurate double layer central hub detail and dish profile.

2010-08-29T03:12:00.035+08:00

Z-04

WW2 German MG34/42 Drum Magazine with Carrier

1:35 Resin + PE

Kit contains 21 resin parts and PE parts to complete 3 highly detailed magazine carrier with drum magazine.

It could be attached to armour car interiors or as seen above carried by a modified Tristar figure.

The highly detailed resin carrier is a one piece casting with the outer support triangular steel plate.

The top retaining bar is also casted in one piece with details on both sides.

6 highly detailed drum magazine is included in the kit. All with separate handle and comes with a optional photoetch belt starter.

The finished carrier showing the photoetch inner triangular support plate, the separate carrying handle with rounded profile (not flat PE parts).

The finished carrier with drum magazines.

2010-08-28T01:19:00.019+08:00

Z-03

WW2 German Scherenfernrohr SF14

1:35 Resin

Kit contains 9 resin parts and 2 clear lens to built into one highly detailed kit. It could be used on a lot of model kits, like the Nashorn, hetzer, stug 3, stug 4, sdkfz250/5, dicker max, tristar's scope set....etc.

Scope mounted onto Tristar's tripot (kit 35033)

Details of the scope and its mounting base.

Scope comes with snap in clear lens and optional weather cover extensions.

Top and bottom view of the mounting base.

Scope attached to Dragon's latest Nashorn.

2010-04-20T02:04:00.041+08:00

Z-02

WW2 German Radio FuSprech a/d,f

1:35 Resin + PE

This radio kit contains 26 resin parts, a few PE parts to built into one highly detailed FuSprech radio set.

2 choices of radio is provided, the FuSprech a/d and FuSprech f. The detail radio frame is casted in one piece with a PE rear panel and side brackets which make construction simple and easy.

The SE Ua1 transformer is detailed from front to rear with separate power cable plug and extension faithfully reproduced. A photoetch base mount is also included in case you want to built the kit without the transformer.

Speaker has details not only at both sides but at the bottom area as well. Other details including the intercom system Kasten Pz.Nr 23 and Kasten Pz.Nr 23a, various connection boxes, antenna mount etc.

Example showing radio installed on Dragon Marder 3 Initial.

2010-03-04T18:23:00.055+08:00

Z-01

WW2 German Panzer Headphone

1:35 Resin + PE

Photo showing finished parts - Headphone, headphone cable, throat mic and cable plugs attached to a Tristar tank crew (figure not included and need slight modification). Each kit contains 3 complete headphone and throat mic.

Close up view. Unlike most other kits, the throat mic is cast in resin using measurements of an actual sample so that the thickness of the mic could be faithfully reproduced.

Close up view showing details of the head phone, again using actual measurements. Each set contain 3 complete headphone & throat mic.

Reference photo showing cable location at the head set and the actual thickness of the throat mic.