Design & Drafting Services

Personal Protective Equipment for Oil and Gas

2012-01-30T18:45:00.001-08:00

HOW TO BUY THE RED WING OFFSHORE BAG

69100 RED WING LARGE OFFSHORE BAG
PRICE: RM425/UNIT

69101 RED WING SMALL OFFSHORE BAG
PRICE: RM325/UNIT

How to order

Select your type and qty to order
Made a payment to us. Please bank in to MOHAS Industry Sdn.Bhd.
Account Number: 12050001914104 CIMB Current Accounts
Email to us details of payment at mhasni@mohasindustry.com or fax to us at 0378323246.
Free delivery: KL & SELANGOR
RM50 outside Selangor or KL per delivery.
For oversea: Item deliver by currier services and charge perkg for each delivery.
Proforma invoice will be provided for payment purpose and before item delivered to your country.
SWIFT CODE: CIBBMYKL (outside Malaysia for payment arrangement)

69100 LARGE OFFSHORE BAG

69101 SMALL OFFSHORE BAG

Personal Protective Equipment for Oil and Gas

2012-01-30T18:39:00.000-08:00

69101 RED WING SMALL OFFSHORE BAG
PRICE: RM325/UNIT ONLY

MATERIAL:

Ballistic Nylon

FEATURES:

• Ideal for egress to helicopter bays

• Side-by-side full-open top zip for easy access

• Multiple side zip compartments for stowing boots, dirty clothes and other gear

• Includes backpack straps

Personal Protective Equipment for Oil and Gas

2012-01-30T18:27:00.000-08:00

69100 RED WING LARGE OFFSHORE BAG

PRICE: RM425/UNIT ONLY

MATERIAL:

Ballistic Nylon

FEATURES:

• Ideal for egress to helicopter bays

• Side-by-side full-open top zip for easy access

• Multiple side zip compartments for stowing boots, dirty clothes and other gear

• Sturdy in-line wheel system and locking telescopic handle with button operation

for easy transport

• Dimensions: 28" L (71 cm) x 16" W (41 cm) x 16" D (41cm)

CAD/CAM/CAE Software

2012-01-30T06:22:00.000-08:00

Belt Conveyor Design Program

Follow us daily for all updated regarding new technologies of Belt Conveyor Design Program

CAD/CAM/CAE Software

2012-01-30T06:14:00.000-08:00

The advantages about Helix Chute Design

Setup Bulk Material properties…

· Setup Material Particle Density

· Enter Particle size range – specify maximum and minimum particle diameter

· Specify Transfer Capacity or throughput in tonnes per hour

· Input material co-efficient of restitution and chute face properties such as restitution and friction

· Add multiple feed points with different materials – allowsfeeding onto already loaded belts.

Perform DEM Calculations & make a movie

Press Calculate to start the DEM calculations and watch as the particles are created in space and then fall onto the moving feed belt and then flow through the chute.

· Powerful calculations to predict the flow of particles through the chute allows particles to collide with each other and with the chute faces.

· Discrete Element Method (DEM) particle flow modeling

· Adjust the position of belts, pulleys, impact plates, chute liners and skirt plates to optimize the flow thorough the chute.

· Export the trace lines and Trajectories to CAD drawings

Record the calculations and produce trace reports and movies

Press Record …

· Record the Particle Flow inWindows Media Player .avi movie format

· Extract reports showing particle positions at each time step of the calculations

· Reports to show velocity of each particle at each time step, including a breakdown showing the velocity in each 3D axis.

· Trace a single particle trajectory as it collides with other particles and the chute faces, belts and other surfaces in the transfer

· Replay the particle trajectory, one step at a time in order to observe actual collision points with surfaces and rebound trajectories.

· Export the trace lines and Trajectories to CAD drawings

· Particle velocities are displayed by colour gradient as well as recorded

CAD/CAM/CAE Software

2012-01-28T13:32:00.000-08:00

HELIX Chute Design

Setup Bulk Material properties…

· Setup Material Particle Density
· Enter Particle size range – specify maximum and minimum
particle diameter
· Specify Transfer Capacity or throughput in tonnes per hour
· Input material co-efficient of restitution and chute face
properties such as restitution and friction
· Add multiple feed points with different materials – allows
feeding onto already loaded belts.
Discharge Trajectory

Perform DEM Calculations & make a movie …

Press Calculate to start the DEM calculations and watch as the particles are
created in space and then fall onto the moving feed belt and then flow through the
chute.
· Powerful calculations to predict the flow of particles through the chute
allows particles to collide with each other and with the chute faces.
· Discrete Element Method (DEM) particle flow modeling
· Adjust the position of belts, pulleys, impact plates, chute liners and skirt
plates to optimize the flow thorough the chute.
· Export the trace lines and Trajectories to CAD drawings

Record the calculations and produce trace reports and movies

Press Record …
· Record the Particle Flow inWindows
Media Player .avi movie format
· Extract reports showing particle positions
at each time step of the calculations
. Reports to show velocity of each particle
at each time step, including a breakdown
showing the velocity in each 3D axis.
· Trace a single particle trajectory as it
collides with other particles and the chute
faces, belts and other surfaces in the transfer
· Replay the particle trajectory, one step at
a time in order to observe actual collision
points with surfaces and rebound
trajectories.
· Export the trace lines and Trajectories to
CAD drawings
· Particle velocities are displayed by colour
gradient as well as recorded

CAD/CAM/CAE Software

2012-01-27T07:18:00.000-08:00

Draw the Chute

The Helix chute design program has the following main features:

· Draw a 3D model of the transfer station in the program

· Use a CAD drawing program to draw the transfer station (optional)

· Add multiple feed and receiving conveyor belts

· Add multiple feed points with different materials

· Add conveyor pulleys to transfer chute

· Cater for any geometry transfer chute

· Ability to Import transfer chute geometry from CAD drawing programs

· Record the Particle Flow inWindows Media Player .avi movie format

· Export the final design geometry back to a CAD drawing program for incorporation of the design in
project drawings

CAD/CAM/CAE Software

2012-01-26T20:52:00.000-08:00

Helix Chute Design

. . . . is a powerful computer software

package developed to make conveyor transfer

chute design more scientific. The program uses

the Discrete Element Method, called DEM, to

calculate and simulate the path a bulk material

follows through a transfer.

Powerful DEM modelling and Calculations

Helix Technologies’ research and development of

conveyor design software began in 1992 and this

Chute Design Program is the culmination of

intensive software development by the company.

The program uses OpenGL graphics coupled to

DEM calculations and 3D Vector geometry

developed entirely in-house to provide the

materials handling design engineer with a

complete design tool for transfer chutes.

CAD/CAM/CAE Software

2012-01-25T18:33:00.000-08:00

progeCAD 2011

CAD (r)evolution

progeCAD 2011, the State of the Art of 2D/3D DWG and DXF CAD, is an easy replacement for AutoCAD® and AutoCAD LT®!

progeCAD 2011 Professional reads and writes AutoCAD® DWG format from v. 2.5 to 2012

Share your DWG, import DWG from PDF, export models to Google Earth®, PDF print, thousands of free blocks are only some of the key features available

CAD/CAM/CAE Software

2012-01-25T00:24:00.000-08:00

HELIX delta-T for WINDOWS - Professional Version 6

BELT CONVEYOR DESIGN PROGRAM

HELIX delta-T is a powerful computer software package developed to assist materials handling design engineers and equipment suppliers with conveyor design and optimisation. Helix Technologies' research and development of this software began in 1992 and delta-T now has more than a thousand users in 25 countries who depend on the program to provide consistent, accurate and cost effective belt conveyor and material handling designs. Features of the new delta-T version 6 program include:

•Automatic Selection of Belt and Tension, Power Calculations.

•Equipment Selection from Databases for Belts, Idlers, Pulleys & Shafts, Gearboxes, Motors, Fluid Couplings, Brakes etc.

•New Equipment databases for Shaft and Drive couplings and conveyor holdbacks have been added in version 6

•Draw a sketch of the conveyor Profile and also view a scale drawing and a 3D model of the conveyor - use Drag and Drop to add Pulleys, Drives, loading Hoppers

•Calculate concave and convex Vertical Curves including belt lift off radii, edge tensions and centre tensions

•Horizontal Curve calculations - design curved conveyors including banking angle and belt drift calculations for all operating conditions

•Calculate using CEMA, ISO 5048 or the new Viscoelastic method for low resistance rubber belts

•Add any number of Conveyor Pulleys, Drives, Loading points, Trippers, Brakes etc.

•Over 70 reports can be viewed, printed or exported to Word, PDF files or Excel etc.

.You can merge multiple selected reports into a single PDF file.

•Delta-T6 has been completely re-written in Microsoft Visual Studio and uses the latest software development tools from Microsoft. It is written in a development language called C# and uses the MS Common Language Runtime compiled for .Net with xml data. This technology is the latest available from Microsoft and this makes it compatible with the latest operating systems including Windows XP, Vista and Windows 7 and also 32bit and 64bit systems.

ULTRASOUND SMK9130

2012-01-25T00:13:00.001-08:00

The SMK9130 is a complete 64-channel ultrasound front-end. The system includes the industry’s only merchant available receive beamformer IC – the SAM2032 implementing the company’s AutoFocus™ beamforming technology with QuadBeam™ phased array processing to provide four scan line outputs for each transmission with continuous dynamic focusing on every sample. The system also includes one each of SMM9132 and SMM9133 32-channel ultrasound receiver modules for full continuous-wave Doppler (CWD) capability. Tri-level or 5-level pulsers and a transmit beamformer support transmission for all black and white and color modes, including a continuously variable power supply for the high voltage path. The system supports post processing and provides an interface to a PC host via USB 2.0 or 4xPCIe 1.1. The system comes with the Samplify Ultrasound API (SUAPI) which is a software layer that allows the user to control over 1000 parameters in the system at a high-level by abstracting the details of the underlying hardware. The SUAPI allows users to quickly implement their imaging software. It also exposes the rich functionality of the highly configurable and programmable system.

SolidWorks Premium 2012

2012-01-21T22:46:00.000-08:00

CREATE AND COMMUNICATE

SolidWorks Premium 2012 is a comprehensive 3D design solution that enables you to create, validate, communicate, and manage your product designs. By integrating powerful design tools, including industry-leading part, assembly, and drawing capabilities, with built-in simulation, costing, rendering, animation, and product data management, SolidWorks Premium makes the development and sharing of design ideas faster, simpler, and smarter.

SolidWorks Tips & Sharing

2012-01-20T06:38:00.000-08:00

SolidWorks Open from BOM.

While working in a drawing with a BOM many times you want/need to open a part while working from time to time. SolidWorks has made this very easy especially of the part we need is not seen in the drawing directly (internal part). From the BOM right click on the part you want/need to open and choose the Open option.

Picture project done by Mohd Hasni

2011-09-30T22:58:00.000-07:00

PALLET RACKING-FOR PROTON SHAH ALAM

Callidus Burner -USING IN FIRE HEATERS SYSTEM

EXXON MOBIL JURONG ISLAND-FIRE HEATERS.

PROPOSED AIR PRE HEATERS SYSTEM.

We specialise...

2011-09-30T22:22:00.000-07:00

1-Expertise in Structural Design, Mechanical Design, Piping System, Coil.
2-Expertise in Heat Exchanger System,Burner,Waste Heat Recovery System,Air
Preheater System, Hot Oil Furnace Heater, Boiler Feed Water Heater, Regen
Gas Heater.
3-Expertise in Platform, Handrail and Ladder.
4-Expertise to prepare all kinds of project from sketch to complete 3D
detail modeling and able
to generate details fabrication drawing.
5-Expertise in 3D SOLIDWORKS, AutoCAD, Microsoft Office System, Microsoft
Project.
6-Experience in project management.

Steel Mould Details

Software:
Solidworks,AutoCAD

SQUASH BALL LOUNCHER

2011-01-01T22:54:00.001-08:00

Sqash ball louncher done in 3D Solidworks

List of project

2010-09-15T07:56:00.000-07:00

PROJECT INVOLVE

Hot Oil Heaters with Air Preheater System                 Waste Heat Recovery System

A few project below is the list of project in 3D Design and Drafting since 2007 until now.

1-CLIENT :KBR-SONATRACH
   LOCATION :EUROPE
   PROJECT NAME : WASTE HEAT RECOVERY UNIT(WHRU)

2-CLIENT :FELUY-INEOS C/O JACOBS ENGINEERING
    LOCATION :BELGIUM
    PROJECT NAME : MODIFICATION APH FOR DOWTHERM FURNACE F-3901

3-CLIENT: PERU L&G

CONTRACTOR:CB & I LIMITED

LOCATION :PERU

PROJECT NAME: REGEN GAS HEATER

4-CLIENT: EXXON MOBIL

   CONTRACTOR:FOSTER WHEELER ASIA
   LOCATION :JURONG ISLAND SINGAPORE
   PROJECT NAME: VC HOT OIL FURNANCE

5-CLIENT: PETRONAS
   CONTRACTOR:LURGI AG
   LOCATION : LABUAN SABAH
   PROJECT NAME: FLUEGAS WASTE HEAT RECOVERY UNIT.

6-CLIENT :PERU LNG SRL
   CONTRACTOR :CB & I
   LOCATION :PERU
   PROJECT NAME:REGENERATION HOT OIL HEATER & 2x HOT OIL FURNACE

7-CLIENT :IMPERIAL OIL
   CONTRACTOR:IMPERIAL OIL
   LOCATION:CANADA
   PROJECT NAME:F-105 CABIN HEATER

8-CLIENT:PETROLEUM DEVELOPMENT OMAN(PDO)
   CONTRACTOR:DODSAL ENGINEERING AND CONSTRUCTION LLC
   LOCATION:QARN ALAM STEAM PROJECT
   PROJECT: 2xBOILER FEED WATER HEATER.

9-CLIENT:SONATRACH

    CONTRACTOR:KBR INTERNATIONAL
    LOCATION:ALGERIA
    PROJECT:SKIKDA WHRU

10- CLIENT:INEOS
     CONTRACTOR:INEOS
     LOCATION:FELUY-BELGIUM
     PROJECT:MODIFICATIONS TO DOWTHERM FURNACE.

11- CLIENT:PETROBRAS
      CONTRACTOR:IESA
      LOCATION:CARTERIA DE GASOLINA,BRASIL
      PROJECT:HDS HEATER X2

12- CLIENT:BP
       CONTRACTOR:KBR
       LOCATION:TOLEDO,USA

PROJECT:UOP PLATFORMER

13- CLIENT:SONATRACH

CONTRACTOR:SAIPEM SPA

LOCATION:ARZEW,ALGERIA

PROJECT:WHRU.

14- CLIENT:CHEVRON AUSTRALIA PTY.LTD

CONTRACTOR:KELLOG JOINT VENTURE GORGON(KJVG)

LOCATION:BORROW ISLAND,AUSTRALIA

PROJECT:2X HOT WATER HEATERS

Negotiable Rate(RM)

2009-12-27T07:34:00.001-08:00

Negotiable RATE for quality of design and draftingMinimum charge RM200 for each project.Complete with details engineering drawing.
What we provide:
3D Details modelling from part to assembly
Drawing files format:
DWG/Drawing/PDF/JPEG.

Request for quotation:
Just give your details sketches
E-mail to us at :mhasni@mohasindustry.com and we can give a quotation.
Price is reasonable.Price in RM.