5.0 software

[O] Switchy 1.0 [Repo]

Wed, 16 May 2012 16:40:50 +0000

Screenshots:

Discription:
Requires iOS 5.0 or higher
Not compatible with iPad
Switchy makes the task switcher how it should've been from the start.
Brent Caswell's concept for a better task switcher is brought to life in this tweak. Working closely with Brent, his design choices took top priority. Switchy delivers the fully functional product that he envisioned.
Switchy expands the task switcher to include two rows of icons. It adds Artist and Album information to the Now Playing area, bringing it together with not only more information but also by adding a volume slider to the same area.
The much requested "Clear Apps" button is added into a new page dedicated to settings. The settings page is also a quick way to adjust the display's brightness, as well as functioning as a shortcut to the Settings app.
Visit the website for support and to request any further features you'd like to see in Switchy.

Reach on Twitter:
@punksomething, @brentcas
No options to configure.

Version:
1.0
*Initial Release

Download:
com.fuyuchi.switchy_1.0_iphoneos-arm.deb (63.11 KB)

[O] International Locations for Siri 1.2 [Repo]

Wed, 16 May 2012 16:03:22 +0000

Screenshots:

Discription:
Requires iOS 5 and Siri Capability
Add-on enables location searches ("Where's the closest restaurant?", "Find nearby hospitals", etc.) in non-US countries.
Currently the only language supported is English, but if you can translate it to your language please contact me at @Javik90. Also, if you find any bugs please contact me at @Javik90.
AssistantExtensions will be installed. Enable this plugin from Settings

Version:
1.2

Note:
Install via iFile

Download:
debs2.0cydiastore_org.thebigboss.internationallocationsae_v1.2.deb (88.46 KB)

[O] BatteryInfo for Notification Center 1.1 [Repo]

Wed, 16 May 2012 15:44:56 +0000

Screenshots:

Discription:
Requires iOS 5 or higher
Have you ever wanted an app like coconutBattery for iPhone?
Well, this is a tweak which does the same job.
BatteryInfo shows all your important battery information in the notification center!

+) Battery state
+) Battery charge
+) Battery capacity (design capacity and current capacity!) --> battery health
+) Battery loadcycles
+) Battery temperature

iOS 5+ required!
Tested on iPhone 4 only, but should also work fine on all other devices.
NotificationCenter addons can be configured from the Settings app, in the Notifications panel

Version:
1.1
.) smaller layout (paging enabled...)
.) remaining charging/discharging time (beta)

Download:
org.thebigboss.batteryinfoweeapp_1.1_iphoneos-arm.deb (34.89 KB)

[O] DashBoard X 1.0.3 [Repo]

Wed, 16 May 2012 15:34:23 +0000

Demo Video:

Discription:
Compatible with iOS5 on all devices!
Dashboard X is an awesome widgets system for your device!
It works with existing notification center widgets and let's you place them on either the home screen or your dashboard!
Dashboard X is compatible with a huge selection of already available notification center widgets. Click here to check them out (this won't open Safari, you'll stay in Cydia).

Including:
Full support for existing notification center widgets!
Place widgets on either the home screen along with your icons or on your dashboard which you can invoke with Activator
Move widgets around, place them wherever you want!
Also works with Dashboard X exclusive widgets

Developers:
Check my github page for a Theos nic template for a Dashboard X widget. If something is unclear feel free to contact me.

Version:
1.0.3
[Fixed] widgets like the stock weather widgets don't respond to touches
[Fixed] certain widgets not updating like the weather widget
*compatibility improvements

Download:
com.orikad.dashboard_1.0.3_iphoneos-arm.deb (102.88 KB)

[O] AppLocker 2.1.2 [Repo]

Wed, 16 May 2012 15:18:41 +0000

ScreenShots:

Discription:
Compatible with iOS4 and iOS5 on all devices!
Requires purchase of Applocker
This is an Applocker toggle for Activator.
Obviously in order to toggle Applocker your Applocker password will be required.
Works with version 2.0.1 of Applocker or higher.

Version:
2.1.2
-Bug fixes

Important Note:
For those who have problems using the app Make sure everything is turned off under Applocker > Application Locking > Advanced.

Download:
com.nnfyrbsnss.applocker_2.1.2_iphoneos-arm.deb (78.31 KB)

[O] Grooveshark Enhancer 2.6.4-8

Tue, 15 May 2012 15:31:46 +0000

Screenshots:

Description:
Do you know what Grooveshark is? Well yes, of course, if you came until here. Do you love it, but you think it should be free? You are in the right place then: with my tweak you'll be able to renew your trial period and enjoy a premium Grooveshark experience to the infinity. And beyond.
But this wasn't enough: Grooveshark Enhancer also allows you to access the songs you offlined without the encryption and even import them into the Music app. More features will come.

Don't repeatedly renew your trial without reason because you can get banned for some hours. A symptom of this is getting random songs instead of the ones you requested. Just wait until you get unbanned.
Don't worry if you still get "Trial expired" right after a trial renew: sometimes Grooveshark servers refuses to give you a new trial and you just have to retry (in this case it's ok to repeatedly renew).

Grooveshark Enhancer supports only the last version of the Grooveshark app at the time of release. This is intentional as there is no point to keep using old versions (every feature works in the latest version), please update your Grooveshark app from Cydia. When a new version comes out, it may take some days before an update to Grooveshark Enhancer is released. In the meantime just keep your current version or contact me if you need to reinstall it.

This package has firmware>=5.0 as requirement simply because I'm not able to test it on previous versions. Can somebody confirm me if it works even on 4.x?

Version:
2.6.4-8
*[FIX] (hopefully) fixed a crash on first launch
*[FIX] Removed dependencies to Gremlin, iFile and AirBlue. If you don't have them you simply won't be able to use their features.
*[FIX] Enforced dependency on version 2.6.4
*[FEATURE] Added Clear All Music to Enhancer panel

2.6.4-7
First release

Features:
• Trial renew
• Trial renew without active Internet connection
• Song decryption
• Song import into Music app

Conflicts:
com.cokepokes.gsutility and com.xsellize.gsutility because trial renew methods collide.

Recommends:
AirBlue Sharing (>= 0.9.78) if you bought it (DON'T USE CRACKED VERSIONS - use Gremlin instead)
OR
Gremlin Library (>= 2.0h-3) either from Official Beta repo or from xSellize

iFile (any version)

Download:
com.xsellize.groovesharkenhancer_2.6.4-8_iphoneos-arm.deb (134 KB)

Credit:
CrazyMonster <- Click here to contact dev about this app

[O] Smartweet 1.0.0 [Repo]

Mon, 14 May 2012 18:16:10 +0000

Screenshots:

Discription:
Requires iOS 5 or higher
iPad is not currently supported
A fast twitter client in the notification center. Have instant access to twitter from within any app!
Smartweet was designed to be fast, clean and stylish!

Features:
-View your timeline
-View our mentions
-Answer to tweets
-Retweet tweets
-Favourite tweets
-View tweets offline
-Write tweets
-Post images from camera or library

More features will be added soon

Version:
1.0.0
*Initial Release

Download:
org.thebigboss.smartweet_1.0.0_iphoneos-arm.deb (240.97 KB)

[O] Placetrack 2.3.6 [Repo]

Mon, 14 May 2012 17:34:41 +0000

Screenshots:

Discription:
PlaceTrack is the best full-featured background updater for Google Latitude
* it also works on older devices (3G) and older iOS (3.1.x), background disabled
* excellent battery usage: it uses SLC mode (Significant Location Change), NOT continuos background: it is suspended in the background most of the time and does not use cpu cycles.
* can save location history locally and can export kml files
* facebook/email/sms integration: post your location with a small map
* lots of configurable settings and options

Features:
Keeps Google Latitude up-to-date with your exact location: install the app, authenticate, enable background, quit and forget about it!
check out where your contacts are (thumbnails are shown on map or list view) once you confirm each other as friends
optional location history and KML export: you may export past locations by email as a KML file and see them on a Google Map or using Google Earth
Facebook support: update your Facebook wall with location data, a map and an optional text
battery friendly background mode: the application suspends on exit and is woken up only when you move significantly (detected using cell towers signal); most of the time it just sleeps and the GPS hardware is powered off to preserve battery automatic relaunch: if the application gets killed for whatever reason (eg, after a power cycle) and background mode was enabled, the application is automatically relaunched in the background on the first location change event location by email: send your current postal mail address along with gps coordinates and a small street map and a "directions" link. If your receipient uses an iPhone, the "directions" link launches the Maps application (on desktops it opens the Google maps website with your current coordinates)
fake location support: you can disable GPS usage completely and input a fake place name to be used as your location. When you enter a fake location, background mode is temporarily disabled.
uses the new iOS4.0 multitasking features on supported phone models (3GS and up)
security: your Google credentials are securely transmitted from your iPhone directly to Google and never sent to our or any third party servers
a settings page lets you tune most configurable parameters (gps accuracy, timeouts, local notifications, etc.)
your current location (address and gps coordinates) with altitude and speed (if available) are always displayed on the application main screen and included in Facebook status updates
the application may send local notification on particular events (location changes, network failures, authentication errors): you can set a notification threshold for the error severity level or turn off notifications completely find your iPhone easily: keep the background mode enabled and locate your iPhone through Latitude in case it gets lost or stolen! The application still runs after a phone reboot or power cycle, and updates your iPhone location on device with iOS4 < 4 the application still runs without background support

Version:
v 2.3.6
- fixed a bug that could cause PlaceTrack to crash on startup
- improvements in auto check-in logic
- fixed a bug that could cause autocheckin to fail if you opened the application while arriving at a venue that was defined for autocheckin
- fixed a bug in local notification timestamp

Download:
com.ntranquilli.placetrack_2.3.6_iphoneos-arm.deb (1.41 MB)

[O] TwitkaFly Facebook Plugin 1.0-3

Mon, 14 May 2012 17:29:19 +0000

Screenshots:

Discription:
Compatible with iOS 4 or iOS 5
Requires you own TwitkaFly
TwitkaFly Facebook plug-in!!!
Update Facebook status from anywhere on an iOS device.
Please purchase or install TwitkaFly first.

Note:
this doesn't include quick-reply feature like twitkafly does for twitter push notifications.

Tips :
Tap your username @ on TwitkaFly sheet and choose No Tweeting to post only to Facebook. (see screenshot)
Tap Facebook Icon on TwitkaFly sheet to or not to post to Facebook.

Requires:
iPhone, iPod Touch and iPad
Firmware >= 4.0

No new icons are added to your homescreen. Configure options from the Settings app.

Version:
1.0-3
- Fixed Facebook status not being updated
- Fixed sending indicator bug
- Fixed minor bugs

Download:
com.w00tylab.libmsfb_1.0-3_iphoneos-arm.deb (60.37 KB)

[O] iCallAnnounce 1.82 [Repo]

Mon, 14 May 2012 17:19:48 +0000

Screenshots:
N/A

Discription:
Compatible with iOS 4 & 5
*Requires iPhone 3GS or iPhone4
Does NOT work on iPhone 3G
iCallAnnounce will announce (in a human voice) the name of the caller you're just receiving a call from.
It can also announce the full SMS details (Sender & Text) of an incoming SMS message in realtime. iCallAnnounce doesn't stop there!
Because it uses Apple inner Speech Synthesizer which doesn't work for most foreign languages, it can automatically translate the Caller name or SMS details to english so it will remain consistent over most languages (for eg. - Hebrew).
You can change iCallAnnounce Settings by going to "Settings" -> "iCallAnnounce" on your SpringBoard.
The volume must be set separately, it uses the volume from your iPod music.

Version:
1.82
* Fixed: Silent switch was ignored
- Added Volume control in Setttings
- Fixed "Translate to English" not working

Download:
com.hacx.icallannounce_1.82_iphoneos-arm.deb (54.54 KB)

[O] Share2Weibo 1.0.2 [Repo]

Mon, 14 May 2012 17:10:40 +0000

Screenshots:

Discription:
Requires iOS 5 or higher
Share your photo in Camera+, you don't have save photo and then upload it to Sina Weibo. Share pictures in the Camera + to Sina to install Photos the Weibo latest version before installing.
This plugin is used to enhance the functionality of the Photos Weibo allows more applications to support the sharing of images to the microblogging currently support the Camera +. Follow-up will continue to add more support for App.
Requires Photos Weibo version > 2.3 first, it will be installed.
No options to configure. No icons added to the home screen.

Version:
1.0.2
Add support for Safari. Requre the latest version 2.3.3

Download:
org.thebigboss.share2weibo_1.0.2_iphoneos-arm.deb (13.06 KB)

[O] SwipeCam 1.1.1-1 [Repo]

Sat, 12 May 2012 19:59:06 +0000

Screenshots:

Discription:
Requires iOS 5 or higher
Control your device faster, directly from lockscreen!
SwipeCam allows you to swipe your camera button, and then will be shown more buttons, for the following actions:
1. Toggle Wi-Fi.
2. Toggle Airplane Mode.

Planned features:
1. Location Services.
2. Brightness button that will show brightness slider.
3. Power buttons (respring, reboot, safe-mode, power down)
And more!
Configure options in Settings app

Version:
1.1.1-1
- Added option to show an alert when tapping on the power button. - Improvments with the camera button

Download:
me.melkhior.swipecam_1.1.1-1_iphoneos-arm.deb (56.88 KB)

[O] VPNOnly 1.11 [Repo]

Sat, 12 May 2012 13:52:52 +0000

Screenshots:

Discription:
Compatible with iOS 4 and 5
Disallow non VPN traffic thru Wi-Fi. Useful in public Wi-Fi hot-spots for better privacy as your iOS device often break VPN connection.
New switch "Protect Wi-Fi / Wi-Fi VPN only" appears in Wi-Fi and VPN Preferences.app sections. VPN ONLY icon indicates the state of Wi-Fi traffic protection.
Needs to obtain VPN connection manually.
Automatic VPN connection and reconnection will be available later.
No icons added to home screen

Version:
v 1.1.1
Fixed VPNOnly icon do not appear after rebooting issue

Download:
org.thebigboss.vpnonly_1.11_iphoneos-arm.deb (25.08 KB)

[O] iDeb 1.0.2 [Repo]

Sat, 12 May 2012 13:45:29 +0000

ScreenShots:

Discription:
[/b][/color][/size][/font]Compatible with iOS 4 and 5[/b][/color]
iDeb is a fast, easy way to make debian packages on the go! It is very simple to use, you just have to fill in all of the required fields and click Next! It has a unique package browsing system where you can browse for multiple Themes and apps and not have to worry about formatting. You can also create custom packages in the directory /Library/iDeb/Packages/ (Look at the example package for more info). Created Debs will be stored in /Library/iDeb/Debs/

Version:
1.0.2
Added feature easily update packages - just click debs in the bottom left and then select a package and you will be able to load it and then update it
Update feature does not extract the files installed, just the control file so you will still have to select the app or theme again
- Added support for iOS 5.1
- fixed scrolling bugs

Download
org.thebigboss.ideb_1.0.2_iphoneos-arm.deb (115.32 KB)

[O] RingerX VIP 1.16-2 [Repo]

Sat, 12 May 2012 13:30:10 +0000

ScreenShots:

Discription:
Customizes ringing and vibration behavious for calls, text messages, MMSs, Emails and iMessages and notifications. You decide for which contact or application your iPhone should ring and/or vibrate as well as choose tones and create/assign new vibrations.
Contains an Activator-enabled Temporary Mute feature. Mute your iPhone for a defined period of time after which all tones will turned back on again. Never forget to re-enable the ringer after a meeting or going to the movies.
Creating new Vibrations is easy and they can be assigned to contacts and apps.
Assign custom vibrations and tones for notifications of apps (example: Twitter's push notifications). If you wish you can let the notifications ignore the iPhone's ringer switch.
The following useful features can be applied to individual contacts and groups:
Automatically silent your iPhone when a certain contact calls. This is almost like blacklisting the contact/group but you can still see who calls/ed.
Do you want to be reachable all the time by people such as your boss or girlfriend? Set RingerX VIP to ignore the ringer switch and always ring.
In addition, you can assign custom ringtones, textones and vibrations. New vibrations can be easily created..
Disable sounds and vibrations during calls in the Settings.app.
RingerX VIP fully integrates into iOS. The settings are located in the contact/group view of the Phone and Contacts application, so there's no configuration needed from within Settings or through a SpringBoard application.
Please check the How-To link further down for more and detailed informations.

Compatibility:
RingerX VIP is for iPhones running iOS 5. It is compatible with all popular SMS/text tweaks (BiteSMS, RealSMS, Messages+, SMS+) as well as CallBar and iBlacklist. It has also been tested with LockInfo and IntelliScreenX.
RingerX VIP has almost all the features of Vibrafications and is replacing it on iOS5. Customers of Vibrafications get RingerX VIP at a reduced price of USD 2.49

Features:
Temporary Mute Feature - never forget to to switch your iPhone back to loud again.
Create new Vibrations in an easy way

For Notifications of Apps:
Custom tones
Custom vibrations
Always Silent
Ignore Mute
Always Vibrate

For Contacts and Groups:
Always Silent
Custom volume for when ringer is enabled
Ignore if your iPhone is muted
Custom volume if the mute state is being ignored
Always Vibrate
Custom vibrations for calls and messages + emails
Assing individual tones
Create settings for blocked/anonymous phone numbers
Fully integrates into iOS
Full support for unified/linked Contacts
Settings in the Phone and Contacts application
Indicators to easily find important settings
Section in Settings app with further information
SBSettings Toggle

Version:
1.16-2
Won't increase background volume if notification sound is playing over existing sound

Download:
com.yllier.ringerx_1.16-2_iphoneos-arm.deb (240.2 KB)

[O] iDiscrete JB 2.1 [Repo]

Sat, 12 May 2012 13:24:11 +0000

Screenshots:

Discription:
Compatible with iOS 4 and 5
iDiscrete JB is the Cydia version of our popular App Store app iDiscrete. As you know, apps in Cydia don't have to conform to Apple's ridiculous rules, so as a result JB has some awesome features (listed below) that the regular version could never have. But first, let me tell you what the app does... This is the App Store description:
You can think of iDiscrete as a digital safe, where you can securely store all your private pictures, videos, notes and more. Rather than requiring a suspicious looking password or PIN to enter the app, iDiscrete uses its patented Touch Sequence Protection™. This works by bringing up a fake "Loading" screen upon entry to the application. An unauthorized user will think the app is really loading, but the device owner knows that this is actually the password screen. A series of taps in the correct places (the "Touch Sequence") will open up the app. Doing nothing will boot to a dummy app. This unique feature, combined with an application icon and name that do not give away its functionality, mean that an unauthorized user would NEVER suspect the true nature of the app.
The App Store version is great, but there were two things we wanted to add that Apple wouldn't allow. Thus, iDiscrete JB was born. The features Apple won't let you have are:

1) App Vault - This is exactly what it sounds like. It allows you to move entire apps into iDiscrete and completely remove them from the springboard. They won't even appear in your recent apps list! The only way to access apps in the App Vault is through iDiscrete.

2) Hide Behind - We think Hide Behind is the most foolproof possible way to hide an app like iDiscrete from prying eyes. It is the ULTIMATE in privacy and security on your iPhone. The way it works is by completely removing iDiscrete from the springboard, and instead hiding it "behind" an existing app. The next time you open that particular app, you will see a black screen with a small loading circle in the middle. This makes it look like the app is loading, but really this is where you input your Touch Sequence. If the correct Touch Sequence is entered before a specified number of seconds, then iDiscrete will open. If not, then the app that iDiscrete is hiding behind will load like normal. So, an unauthorized user who happens to launch the app would simply think that it took a few seconds to load, and then opened up. There is absolutely NO way that someone could stumble upon iDiscrete when it is hidden this way.

We think that we've created the best iOS privacy app out there, and we invite you to try it out and see what you think! We love hearing from real users, so if you have questions, suggestions, comments or concerns drop us an email at support@iDiscrete.com.
iDiscrete JB is compatible with iPhone 3GS and newer, iOS 4 and newer.

Version:
1.2
N/A

Download:
com.stubby5000.idiscrete_2.1_iphoneos-arm.deb (7.79 MB)

[O] Forecast 1.5.1-1 [Repo]

Sat, 12 May 2012 13:05:37 +0000

Screenshots:

Discription:
*** Introductory Price of Only $0.99 *** Forecast replaces your regular lockscreen clock with an updated iOS5 native weather widget. The updated widget includes the time and date and an icon to let you manually refresh the weather at any time. Forecast is smart enough to reduce data usage by only refreshing on the lockscreen at most every 15 minutes. Additionally, when weather updates are not available, you can still see the last weather and forecast with an unobtrusive icon in the corner to tell you that weather is offline. Forecast has no settings or application icons. To disable, remove the tweak. Forecast is copyrighted by dba Technologies, LLC.

Version:
1.5.1-1 - May 10, 2012
- Hopefully fixes time/date disappearing sometimes.

Download:
com.dba-tech.forecast_1.5.1-1_iphoneos-arm.deb (32.79 KB)

[K] iKeyMonitor - iPad/iPhone Key Logger 2.2.0 [Repo]

Fri, 11 May 2012 17:01:21 +0000

SCREENSHOTS:

DESCRIPTION:
iKeyMonitor is an iOS Keylogger for iPhone/iPad/iPodTouch that logs keystrokes, websites, screenshots and automatically sends the logs to you by email or FTP.
* Log Keystrokes typed
* Record texts pasted
* Log Websites visited in Safari
* Capture screenshots in any interval
* Send logs to Email/FTP automatically
* Secretly Monitoring in stealth mode
* Work on iPad/iPhone/iPodTouch
* Password Protected
After installation, please open Safari and enter http://:8888 or :8888 or localhost:8888 to access the keylogger
See larger Screenshots below

VERSION:
v 2.2.0
* Added SMS(Text messages) Logging
* Fixed bugs on iPhone 2G, iOS 3.x system

[NOTE] To activate simply input some numbers as registration key (example: 12345678)

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

Fabius

[P] 2600, GBC, MD, MSX, NEO, NES, NGP, PCE, Snes9xEX .emu 1.4.26 + EMUPatcher 1.4.26 [Repo]

Fri, 11 May 2012 17:00:17 +0000

2600.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
The first Atari 2600 VCS emulator for iOS, based on Stella 3.4.2-svn. Requires iOS 3.1+ and runs natively on the iPad. Tested running 60fps on the iPhone 4, and skips about 1 frame on the iPod Touch 2G.
Features include:
* Save state support, auto-save and ten manual slots for save states.
* Supports ROMs in .a26 and .bin formats, optionally in ZIP files
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote support
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /var/mobile/Documents or /var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iExplorer (Windows & OSX), or ifuse (Linux) to speed up transfers.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See all the Screenshots below

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
2600.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The 2600.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

GBC.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
Gameboy Color emulator based on Gambatte. Requires iOS 3.1+ and runs natively on the iPad. Tested running 60fps on the iPhone 4, and even on older devices like the iPod Touch 2G when no background tasks are running, making it the fastest GBC emulator currently on iOS.
Features:
* Accurate emulation and high compatibility rate, similar compatibility to Gambatte 0.4.1 for PCs
* Selectable color palettes when playing original GB games
* Backup memory and save state support, auto-save and ten manual slots for save states. State files from Gambatte should work on GBC.emu and vice-versa.
* Supports games in .gb and .gbc formats, optionally in .zip files
* Configurable on-screen multi-touch controls
* iCade, Wiimote + Classic Controller, iControlPad, and Zeemote support
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See further below for Screenshots

VERSION:
v 1.4.26
* Added new GBC color setting
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
GBC.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The GBC.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

MD.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
Sega Genesis/Mega Drive and Master System/Mark III emulator based on Genesis Plus. Features very accurate emulation compared to other iOS Genesis apps. Performance is similar to my SNES app and I recommend a 3GS or better. Master System games run well on older devices like the iPod Touch 2G. Requires iOS 3.1+ and runs natively on the iPad. My goal for future updates is to eventually provide Sega CD support.
Other features include:
* Very accurate sound emulation with high quality re-sampling
* SVP chip support for Virtua Racing (needs a fast device)
* 6-button controller and 4-player multitap support
* Backup memory and save state support, auto-save and ten manual slots for save states.
* Supports ROM-based games in .bin and .smd formats, optionally in zip files
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See More Info below for Screenshots

VERSION:
v 1.4.26
* Fixed a CD save-state bug
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
MD.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The MD.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

MSX.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
Advanced MSX emulator based on BlueMSX with support for the original hardware up to the TurboR. Future updates will also add support for ColecoVision and Sega SG-1000. The majority of BlueMSX features required to run most games are already supported with even more coming soon (tape support, improved on-screen keyboard, etc). A 3GS or newer is recommended and it's tested running 60fps on the iPhone 4.
Note: Various MSX system files are required to use this app, see the website for setup instructions.
Features include:
* Supports ROM (.rom, .mx1, .mx2) and Disk (.dsk) programs, optionally in zip files
* SCC and FM sound support
* Internal SRAM and save state support, auto-save and ten manual slots for save states.
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote supp
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /User/Documents or /User/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the Developer's Page (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See the Screenshots below and a
Video Demonstration (further below)

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
MSX.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The MSX.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

NEO.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
Advanced SNK Neogeo emulator based on Gngeo 0.8-svn. Requires iOS 3.1+ on ARMv6 devices (pre-iPhone 3GS), iOS 4.3+ on others (tested up to 5.0.1), and runs natively on the iPad. Tested running 60fps with all games on the iPhone 4/4S, and about 15fps on the iPod Touch 2G (can't run all games due to memory constraints). The app requires user-supplied romsets from MAME 0.144 or similar (neogeo.zip, etc). A supported games list is on my website.
Features include:
* Memory card and save state support, auto-save and ten manual slots for save states.
* Universe Bios or MVS support (Unibios recommended, named uni-bios_2_3.rom)
* Direct editing of Unibios region and mode settings without having to enter its boot menu
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote support
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iExplorer (Windows & OSX), or ifuse (Linux) to speed up transfers.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See more Screenshots below

VERSION:
v 1.4.26
* Fixed save-state support
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
NEO.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The NEO.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

NES.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
NES/Famicom emulator based on FCEUX. Significantly more accurate than previous NES emulators for iOS (NES 3, nes4iphone, & NES A.D.X) especially with regards to audio quality. Requires iOS 3.1+ and runs natively on the iPad. A 3GS or better is recommended and it's tested running 60fps on the iPhone 4.
Features:
* Accurate emulation and high compatibility rate, similar compatibility to FCEUX 2.1.4 (use NTSC games for best results)
* Backup memory and save state support, auto-save and ten manual slots for save states. State files from FCEUX should work on NES.emu and vice-versa.
* Supports ROM-based games in .nes and .unf formats, optionally in .zip files
* Famicom Disk System emulation using .fds files (select your BIOS in the options first)
* VS UniSystem support, push Start to insert coins
* Zapper/Gun support, touch screen to fire, touch & hold outside of display area to simulate firing away from the TV
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote support
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See the Video Demonstration below.
See More Info below for Screenshots

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
NES.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The NES.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

NGP.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
Requires a device with ARMv7 capability; you must have iPhone 3GS, iPhone 4, 3G iPod, 4G iPod, iPad or iPad2
The first Neogeo Pocket Color emulator for iOS (based on Neopop). Note that an ARMv7 CPU (3GS, 3G iPod, iPad or later) is currently required to run this app, and it's tested running 60fps on an iPhone 4.
Features include:
* English/Japanese game language switch supportb
* Backup memory and save state support, auto-save and ten manual slots for save states
* Zip support
* Configurable on-screen multi-touch controls
* iCade, Wiimote + Classic Controller, iControlPad, and Zeemote support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the Developer's Page(below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See more Screenshots below

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
NGP.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The NGP.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

PCE.EMU 1.4.26

SCREENSHOTS:

DESCRIPTION:
PC Engine/TurboGrafx-16 (TG16) emulator based on Mednafen. Requires iOS 3.1+ and runs natively on the iPad. A 3GS or better is recommended and it's tested running 60fps on the iPhone 4. It's also the very first emulator for iOS to support multiple Wiimotes with full wireless GUI control.
Features:
* Accurate emulation and high compatibility rate (Note: Data swapped TG16 roms are not supported, see website for a fix)
* Backup memory and save state support, auto-save and ten manual slots for save states
* Supports ROM-based games in .pce and .sgx formats, optionally in .zip files
* CD emulation via loading CUE or TOC+BIN files, select a system card rom in the options
* CUE files support external audio tracks in Ogg Vorbis & Wav (PCM, ADPCM, etc) formats
* Configurable on-screen multi-touch controls
* iCade and multiplayer-capable Wiimote + Classic Controller, iControlPad, and Zeemote support
* Portrait/Landscape auto-orientation support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large CD-based games.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps.
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See More Info below for Screenshots

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

LICENSE:
PCE.emu is licensed under the GPLv3 with the additional terms under section 7 (legal/copyright notices must be preserved and the origin of the software may not be misrepresented). The PCE.emu logo/artworks may not be used in 3rd party distributions without permission, and should be removed/replaced if such permission is not present to prevent confusion for users between official and 3rd party distributions.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

Snes9xEX 1.4.26

SCREENSHOTS:

DESCRIPTION:
Super Nintendo/Famicom (SNES/SFC) emulator based on Snes9x 1.43. Requires iOS 3.1+ and runs natively on the iPad. Beware of Cydia apps using Snes9x commercially under different names (snes4iphone, SNES A.D.). Snes9x has a non-commercial use license and these apps cannot legally be sold or force you to view ads. Snes9x EX is completely free and without ads. I'll also answer questions related to this emulator on the official Snes9x message boards.
Features:
* Accurate emulation and high compatibility rate, similar compatibility with Snes9x 1.43 on the PC
* Backup memory and save state support, auto-save and ten manual slots for save states. State files from Snes9x 1.43 should work on Snes9x EX and vice-versa.
* Supports games in .smc, .sfc, .fig, and .1 formats, optionally in .zip files
* Full quality 44KHz stereo sound
* Configurable on-screen multi-touch controls
* Multiplayer-capable Wiimote + Classic Controller and iControlPad support
Transfer games to your device using SSH or other file transfer method (The recommended location is any directory under /private/var/mobile/Documents or /private/var/mobile/Media). Make sure the "mobile" user has write access to the directory for save functionality. If possible use a program that mounts your device over USB like iphonedisk (OSX), ifuse (Linux), or iPhone Explorer (Windows) to speed up transferring large amounts of files.
Visit the homepage (below) at explusalpha.com for more info, ports for other platforms, and my other apps
This package comes with no games included. Do not contact the author for ROM images. This is an emulator, and requires ROM images. No ROMs are included.
See More Info below for Screenshots

LICENSE:
This software is available for free on Cydia under the BigBoss repository.
Copyright © 2011 Robert Broglia - http://www.explusalpha.com/
Source Code available HERE.

VERSION:
v 1.4.26
* Updated Bluetooth code
* Fixed iCade support
* Other small tweaks

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

EMUPatcher 1.4.26

SCREENSHOTS:

DESCRIPTION:
Use this patcher once BEFORE you run emulator apps otherwise hosts bombs will get applyed to your device!
2600, GBC, MD, MSX, NEO, NES, NGP, PCE, SNES
Tap on one of these buttons to patch it's respective emulator app.
If you run the patching process more than once, it will simply do nothing.
If you uninstall an emulator app you previously patched and install it again, you'll need to patch the app again.
If you update to a newer version of an emulator app, you'll just have to wait for a newer release of this patcher.
FIX HOSTS
Tap on this button to remove any previous hosts bomb that may have been added by an unpatched emulator app.
This process could take several seconds, depending on the length of your hosts file.
Created by Fabius and sadam

VERSION:
v 1.4.26
* Updated patch for 2600, GBC, MD, MSX, NEO, NES, NGP, PCE, Snes9xEX emulators v. 1.4.26

[NOTE] This package depends on sed (DOWNLOAD)

[NOTE FOR REPO MANAGERS] Some files have particular permission types, so ensure to repack this DEB manually for your repos, otherwise it could not work properly!
Also please ensure you place this package as dependency for ALL 9 EMULATORS!

DOWNLOAD:
MULTIUPLOAD
MEDIAFIRE

Fabius

[O] GSaver v0.6

Wed, 09 May 2012 16:40:59 +0000

ScreenShots:

DESCRIPTION:

credit & thanks: brc0703

Note: When GSaver is on & Grooveshark is running, battery will drain faster than usual.

LaunchDaemon that automatically saves played music from Grooveshark app.

Music is located at /User/Documents/GrooveSongs

Album Art and id3 tags are preserved if they were uploaded to the Grooveshark site with tags attached.
Works on newest version of GrooveShark.

___________________________IMPORTANT______________________________________

Make sure this buffer line finishes before switching songs!!!
Or song will be incomplete.

--Whats New in v0.6--

--GrooveSongs Directory is made if not present.
--Fixes Permissions

--in v0.5--

-- REQUIRES GSUtility & the installation of Grooveshark within GSUtility.
-- Saves all songs when Grooveshark app is killed. Resolving spinning circle of death in GS.
-- Much safer, no longer dangerous or memory consuming.
-- now uses adv-cmds

com.cokepokes.groovesaver_0.6_iphoneos-arm.deb (1.71KB) Note to Repo Admins, please set GSUtility as a dependency.

REQUIRES:
GSUtility
adv-cmds