Computer And Internet Tutorials Tips And Trick

How To Remove The Default Admin$ Shares.txt

noreply@blogger.com (Unknown) — Fri, 26 Nov 2010 22:10:00 +0000

By default Windows 2000, Windows XP and WinNT automatically setup hidden admin shares (admin$, c$ and d$), this registry key will disable these hidden shares.

System Key: [HKEY_LOCAL_MACHINE\ System\ CurrentControlSet\ Services\ LanmanServer\ Parameters]
Value Name: AutoShareWks
Data Type: REG_DWORD (DWORD Value)
Value Data: (0 = disable shares, 1 = enable)

This registry key actually stops the recreation of the shares, therefore it may be necessary to delete the shares through the drive properties also or you can also remove the shares through the Computer Management Console.

1. In Control Panel, double-click Administrative Tools, and then double-click Computer Management.

2. Click to expand Shared Folders, and then click Shares.

3. In the Shared Folder column, right-click the share you want to delete, click Stop sharing, and then click OK.

Note : To remove the admin share for only the current session use the second method (Computer Management console), if you want a permanent removal, add the AutoShareWks registry.

How to Remove DRM Protection for Video Files

noreply@blogger.com (Unknown) — Fri, 26 Nov 2010 22:10:00 +0000

How to Remove DRM Protection for Video Files

This is how to unprotect the Video files from Mcft latest technology DRM.
So here is the procedure:

1. Install fresh Windows XP SP1 (English)
2. Download and install WMP9 from Mcft
3. Make sure you are now able to play the .wmv files from the DVD. That requires running dvdrun.exe, individualizing WMP and finding the right proxy if you are not in US to get the license.
4. Get the DRM2WMV files from the below links
5. Download Japanese version of WMP9 from Mcft
6. Doubleclick the downloaded file, it will unpack all installation files to temp directory in your Documents and Settings directory. Get the drmv2clt.dll file and copy it to c:\Program Files\Windows Media Player directory. Cancel the Japanese WMP9 installation.
7. Edit lines 9-12 of the drmdbg.ini downloaded from step 4 as written bellow

drmv2clt=1;
drmclien=0;
blackbox=0;
indivbox=0;

8. Doubleclick drmdbg.exe. It should open WMP. Navigate to your wmv file. After acquiring the license the drmdbg DOS window should display something like this:

drmdbg Ver 0.31 by taku
CreateProcess: c:\Program Files\Windows Media Player\wmplayer.exe
010010C5 âvââOâëâÇ âGâôâgâÕü[ â|âCâôâg
IsDebuggerPresent: memwriteret=1 callret=0
crc: 2850B98C c:\Program Files\windows media player\drmv2clt.dll
setbp 09252BCC 50
eax 00D6E1C8

LCqa6j9UTtiPj3FZKZ0pFnIYzaM=

[]

Copy the last 6 lines and paste them to T2_Part1.key text file to the drm2wmv1241\drm2 directory.

9. Copy the wmv files from the DVD to the drm2wmv1241 directory.
10. Change your date to 12/Feb/2005
11. Open DOS window, go to drm2wmv1241 directory. Type
md c:\windows\#dummy
X.wmv (where X indicates your file name)

The file should be decrypted. Here is what I see:

J:\drm2wmv1241>md c:\windows\#dummy

J:\drm2wmv1241>drm2wmv X.wmv (where X indicates your file name)

DRM(Ver1&2) Conversion tool Ver 1.241 by taku

J:\drm2wmv1241>drm2wmv X.wmv (where X indicates your file name)
DRM(Ver1&2) Conversion tool Ver 1.241 by taku
DRMv1 KID (17fG9KorUkm83BmyUnPv3w==)
DRMv2 KID (17fG9KorUkm83BmyUnPv3w==)
ÅSâpâPâbâgÉö: 110189ü@1âpâPâbâgâTâCâY: 9418
|################# | 34%

You can download the file from here
Code:
http://www.savefile.com/files/7205691

How to recover MOST of scratched CD data discs

noreply@blogger.com (Unknown) — Fri, 26 Nov 2010 22:09:00 +0000

How to recover MOST of scratched CD data discs

I learn an old thecnique to how to recover damaged or scratched disks
with some lost of data. In this case i have one borrowed game - MAX PAYNE 2
with a chunck of 4 mb lost with a scratch in CD1 Install. Here we cover some
special thecniques of how to create a full working CD from the scratched one.

First some tools will be needed:

1. Alcohol 120%
2. UltraISO
3. Windows XP/2000 (not tested on 95/98/me)
3. Small piece of cotton
4. Dry cleaner paper
5. Finally, oil for cooking.

First step - preparing the CD

Get the cotton and drop some water, start cleaning vertically the surface of CD.
Do it 3 times and dry the water with a piece of dry cleaner paper. With a new piece
of cotton, drop some oil for cooking and start to wet the surface like you are
washing the CD with the oil. Dry carefully now. Some particles of oil will stay on the
microsurface of the scrath. It's okay. Seems the oil helps the laser of the CD/DVD driver
to read the surface again. Sure this will work with small unreadable scratchs - some hard
scratchs loose parts of the surface of the CD where we have data and it's lost forever.
But if it is loosed try anyway. Whith this tip 80% of the small scratched CD's coud be
recovered.

Second Step - testing the CD

With Alcohol 120% make an ISO - image making wizard - and lets see if the app can
read the loosed surface. In my case Alcohol 120% had recovered 60% of the data.
This is not enough. Have tryed other appz, they do not recover all the data. But the
CD/DVD driver laser CAN recover all data in this case. the data is still there, what we do?

third step - making the new CD

With the main copy system of windows explorer you can do it. Just create one folder
with the same name of the CD label for future burn reference, and copy the CD content
to the folder. When the CD copy process find the scratch, in majority of the cases, it's
slow down the reading and will recover ALL loosed data.If not, it just tell you there's
an unreadable sector. In this case your CD is lost. But it's not my case, finally
windows explorer got all the data from the scratch and made a copy in the folder.
with the ultraISO, wrote the original CD label, drop the content of the folder and
save as Iso. You can Test the new CD just mounting the iso in the Alcohol 120%. In my
case i did ISO of the two discs from MAX PAYNE 2 and tested installing from the mounted
ISO. Works like a charm. I got the 4 mb lost again. So, I have burned the CD and now i
have a working copy from the scratched one.

Sounds too bizzarre, but works. Course you can jump the cleaning process and try to copy
the content with Windows explorer. But in my case did not work without oil...

How To Play Movies (divx Etc) With Subs.txt

noreply@blogger.com (Unknown) — Fri, 26 Nov 2010 22:09:00 +0000

Download and install the following packages:

CODE
http://www.afterdawn.com/software/version_...ory/ffdshow.cfm

Click on FFDSHOW 2004-XX-XX (date) and then on the download icon
at the bottom of the page.

CODE
http://www.vorbis.com/files/1.0/tobias/OggDS0995.exe

CODE
http://www.vorbis.com/files/1.0/tobias/SubTitDS1400.exe

--------------------------------------------------------------------------

Recomended Player:

CODE
http://sourceforge.net/project/showfiles.p...lease_id=227046

Choose between mpc2kxp6482.zip (windows 2000 & XP) or mpc98me6482.zip
(windows 98 & Me)
On the page that apears click on one of the litle pages on the right.

To play subtitles with this player you mus do the following:
Go to View->Options->Output (Playback) and select (DirectShow Video) VRM7
or
VRM9 renderless (the highest you got).
On the same page select the highest DirectX version you got two times.
If you want to make this player your default go to View->Options->Formats
(Player)
and select the file formats you want to associate with it.
--------------------------------------------------------------------------

After all this you will be able to playback 99% of all movies DivX, Xvid,
Ogg, with MP3 or AC3 sound.

Please notify me if any of these links do not work.

If you are looking for a all in one solution you might enjoy this player called VLC:

CODE
http://www.videolan.org/vlc/

How To optimize DSL-CABLE connection speed

noreply@blogger.com (Unknown) — Fri, 26 Nov 2010 22:04:00 +0000

First, u need to goto Start, then run. Type in regedit in the box. Next, goto the folder HKEY_LOCAL_MACHINE\System\CurrentControlSet\VxD\MSTCP
Now, find the string DefaultRcvWindow . Now, edit the number to 64240 then restart your computer. There you go. High speed cable modem now with out dloading a program. Original value is 373360

How to modify *.exe files

noreply@blogger.com (Unknown) — Wed, 14 Apr 2010 03:48:00 +0000

learn how to change *.exe files, in 5 easy steps:

1) Don't try to modify a prog by editing his source in a dissasembler.Why?
Cause that's for programmers and assembly experts only.

try to view it in hex you'll only get tons of crap you don't understand.
First off, you need Resource Hacker(last version). It's a resource editor-
very easy to use, You can download it at h**p://www.users.on.net/johnson/resourcehacker/

2) Unzip the archive, and run ResHacker.exe. You can check out the help file too

3) You will see that the interface is simple and clean. Go to the menu FileOpen or press Ctrl+O to open a file. Browse your way to the file you would like to edit. You can edit *.exe, *.dll, *.ocx, *.scr and *.cpl files, but this tutorial is to teach you how to edit *.exe files, so open one.

4) In the left side of the screen a list of sections will appear.
The most common sections are
-String table;
-RCData;
-Dialog;
-Cursor group;
-Bitmap;
-WAV.
*Icon: You can wiew and change the icon(s) of the program by double-clicking the icon section,chossing the icon, right-clicking on it an pressing "replace resource". After that you can choose the icon you want to replace the original with.
*String table: a bunch of crap, useful sometimes, basic programming knowladge needed.
*RCData: Here the real hacking begins. Modify window titles, buttons, text, and lots more!
*Dialog:Here you can modify the messages or dialogs that appear in a program. Don't forget to press "Compile" when you're done!
*Cursor group: Change the mouse cursors used in the program just like you would change the icon.
*Bitmap: View or change images in the programs easy!
*WAV:Change the sounds in the prog. with your own.

5) In the RCData,Dialog,Menu and String table sections you can do a lot of changes. You can modify or translate the text change links, change buttons, etc.

TIP: To change a window title, search for something like: CAPTION "edit this".
TIP: After all operations press the "Compile Script" button, and when you're done editing save, your work @ FileSave(Save as).
TIP: When you save a file,the original file will be backed up by default and renamed to Name_original and the saved file will have the normal name of the changed prog.
TIP: Sometimes you may get a message like: "This program has a non-standard resource layout... it has probably been compressed with an .EXE compressor." That means that Resource Hacker can't modify it because of it's structure.

How To Make XP Go Faster

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:54:00 +0000

Services You Can Disable

There are quite a few services you can disable from starting automatically.
This would be to speed up your boot time and free resources.
They are only suggestions so I suggestion you read the description of each one when you run Services
and that you turn them off one at a time.

Some possibilities are:
Alerter
Application Management
Clipbook
Fast UserSwitching
Human Interface Devices
Indexing Service
Messenger
Net Logon
NetMeeting
QOS RSVP
Remote Desktop Help Session Manager
Remote Registry
Routing & Remote Access
SSDP Discovery Service
Universal Plug and Play Device Host
Web Client

--------------------------------------------------------------------------------

Cleaning the Prefetch Directory

WindowsXP has a new feature called Prefetch. This keeps a shortcut to recently used programs.
However it can fill up with old and obsolete programs.

To clean this periodically go to:

Star / Run / Prefetch
Press Ctrl-A to highlight all the shorcuts
Delete them

--------------------------------------------------------------------------------

Not Displaying Logon, Logoff, Startup and Shutdown Status Messages

To turn these off:

Start Regedit
Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionpoliciessystem
If it is not already there, create a DWORD value named DisableStatusMessages
Give it a value of 1

--------------------------------------------------------------------------------
Clearing the Page File on Shutdown

Click on the Start button
Go to the Control Panel
Administrative Tools
Local Security Policy
Local Policies
Click on Security Options
Right hand menu - right click on "Shutdown: Clear Virtual Memory Pagefile"
Select "Enable"
Reboot

For regedit users.....
If you want to clear the page file on each shutdown:

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementClearPageFileAtShutdown
Set the value to 1

--------------------------------------------------------------------------------

No GUI Boot

If you don't need to see the XP boot logo,

Run MSCONFIG
Click on the BOOT.INI tab
Check the box for /NOGUIBOOT

---------------------------------------------------------------------------------
Speeding the Startup of Some CD Burner Programs

If you use program other than the native WindowsXP CD Burner software,
you might be able to increase the speed that it loads.

Go to Control Panel / Administrative Tools / Services
Double-click on IMAPI CD-Burning COM Service
For the Startup Type, select Disabled
Click on the OK button and then close the Services window
If you dont You should notice

--------------------------------------------------------------------------------

Getting Rid of Unread Email Messages

To remove the Unread Email message by user's login names:

Start Regedit
For a single user: Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionUnreadMail
For all users: Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUnreadMail
Create a DWORD key called MessageExpiryDays
Give it a value of 0

------------------------------------------------------------------------------

Decreasing Boot Time

Microsoft has made available a program to analyze and decrease the time it takes to boot to WindowsXP
The program is called BootVis

Uncompress the file.
Run BOOTVIS.EXE
For a starting point, run Trace / Next Boot + Driver Delays
This will reboot your computer and provide a benchmark
After the reboot, BootVis will take a minute or two to show graphs of your system startup.
Note how much time it takes for your system to load (click on the red vertical line)
Then run Trace / Optimize System
Re-Run the Next Boot + Drive Delays
Note how much the time has decreased
Mine went from approximately 33 to 25 seconds.

--------------------------------------------------------------------------------
Increasing Graphics Performance

By default, WindowsXP turns on a lot of shadows, fades, slides etc to menu items.
Most simply slow down their display.

To turn these off selectively:

Right click on the My Computer icon
Select Properties
Click on the Advanced tab
Under Performance, click on the Settings button
To turn them all of, select Adjust for best performance
My preference is to leave them all off except for Show shadows under mouse pointer and Show window contents while dragging

---------------------------------------------------------------------------

Increasing System Performance

If you have 512 megs or more of memory, you can increase system performance
by having the core system kept in memory.

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory ManagementDisablePagingExecutive
Set the value to be 1
Reboot the computer

---------------------------------------------------------------------------

Increasing File System Caching

To increase the amount of memory Windows will locked for I/O operations:

Start Regedit
Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSession ManagerMemory Management
Edit the key IoPageLockLimit

-----------------------------------------------------------------------------

Resolving Inability to Add or Remove Programs

If a particular user cannot add or remove programs, there might be a simple registry edit neeed.

Go to HKCUSoftwareMicrosoftWindowsCurrentVersionPoliciesUninstall
Change the DWORD NoAddRemovePrograms to 0 disable it

4096 - 32megs of memory or less
8192 - 32+ megs of memory
16384 - 64+ megs of memory
32768 - 128+ megs of memory
65536 - 256+ megs of memory

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:53:00 +0000

How To Make Perfect Copies Of Maxis The Sims Discs, CloneCD Style!

verry simple.. get the latest version from h**p://slysoft.com download it , install, restart.

now that it's installed. Click in the "Read to Image" icon.. click next to get to the next screen.. select "Protected PC Game" click next.. and after it makes the image.. exit the program..

Now re-open CloneCD
click on the "Write from image" icon.. clicik next.. select "Protected PC Game" and click next.. NOTE:!! i tested this method with an CD-RW.. so far i wont/cant test with a CD-R (shouldn't make a difference) because i'm down to my last 3 CD-R's.. so you can try a CD-R.. i dont care but sofar i tested with the TDK 80min/700mb CD-RW blanks..

now i had it working without a patch.. after i burnt the disc.. i installed the sims from the burnt copy and tried to load.. IT Worked! i've got the sims in the background as i speak!.. not sure if anyone else knew about this but i got this idea in a dream about Digimon and Dragon Drive.. (DONT EVEN ASK WHY!) but "Guilmon" and "Chibi" said Tom.. to make a Perfect copy of The Sims CD's.. Use Clone CD.. afterwards . i woke up.. and i tried it! henh .. uncanny hunh?

How to make key generators

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:52:00 +0000

How to make key generators?
-===========================-
Introduction
------------
I take no responsibility of the usage of this information.
This tutorial, is for educational knowledge ONLY.
Hi there, in this tutorial, I intend to teach you how to make a pretty
simple keygen, of a program called W3Filer 32 V1.1.3.
W3Filer is a pretty good web downloader...
I guess some of you might know the program.
I`ll assume you know:
A.How to use debugger (in this case, SoftIce).
B.How to crack, generally (finding protection routines,patching them,etc...).
C.How to use Disassembler (This knowledge can help).
D.Assembly.
E.How to code in Turbo Pascal ™.
Tools you`ll need:
A.SoftIce 3.00/01 or newer.
B.WD32Asm. (Not a must).
C.The program W3Filer V1.13 (if not provided in this package), can be found in
www.windows95.com I believe.
D.Turbo Pascal (ANY version).
Well, enough blah blah, let's go cracking...
Run W3Filer 32.
A nag screen pops, and , demands registration (Hmm, this sux ;-)) Now,
We notice this program has some kind of serial number (Mine is 873977046),
Let's keep the serial in mind, I bet we`ll meet it again while we're on
the debugger.
Well, now, let's put your name and a dummy reg code...
set a BP on GetDlgItemTextA, and, press OK.
We pop inside GetDlgItemTextA, Lets find the registration routine...
I`ll save you the work, the registration routine is this:
:00404DB2 8D95A8FAFFFF lea edx, dword ptr [ebp+FFFFFAA8]
:00404DB8 52 push edx ---> Your user name here.
:00404DB9 E80B550000 call 0040A2C9 ---> Registration routine.
:00404DBE 83C408 add esp, 00000008 ---> Dunno exactly what is it.
:00404DC1 85C0 test eax, eax ---> Boolean identifier, 0 if
:00404DC3 7D17 jge 00404DDC ---> registration failed, 1 if
OK.
Well, Let's enter the CALL 40A2C9, and see what's inside it:
(Please read my comments in the code).
* Referenced by a CALL at Addresses:
|:00404DB9 , :00407F76
|
:0040A2C9 55 push ebp
:0040A2CA 8BEC mov ebp, esp
:0040A2CC 81C4B0FEFFFF add esp, FFFFFEB0
:0040A2D2 53 push ebx
:0040A2D3 56 push esi
:0040A2D4 57 push edi
:0040A2D5 8B5508 mov edx, dword ptr [ebp+08]
:0040A2D8 8DB500FFFFFF lea esi, dword ptr [ebp+FFFFFF00]
:0040A2DE 33C0 xor eax, eax
:0040A2E0 EB16 jmp 0040A2F8
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A2FB©
|
:0040A2E2 0FBE0A movsx ecx, byte ptr [edx] ----> Here Starts the
interesting part.
:0040A2E5 83F920 cmp ecx, 00000020 ----> ECX is the the current
char in the user name, Hmm, 20h=' '...
:0040A2E8 740D je 0040A2F7 ----> Let's see,
:0040A2EA 8A0A mov cl, byte ptr [edx] ----> Generally, all this loop
does, is copying
the user name from
[EDX], to [ESI], WITHOUT the spaces!
(Keep this in mind! ).
:0040A2EC 880C06 mov byte ptr [esi+eax], cl
:0040A2EF 42 inc edx
:0040A2F0 40 inc eax
:0040A2F1 C6040600 mov byte ptr [esi+eax], 00
:0040A2F5 EB01 jmp 0040A2F8
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A2E8©
|
:0040A2F7 42 inc edx
* Referenced by a (U)nconditional or ©onditional Jump at Addresses:
|:0040A2E0(U), :0040A2F5(U)
|
:0040A2F8 803A00 cmp byte ptr [edx], 00
:0040A2FB 75E5 jne 0040A2E2 ----------------> This is the loop , we got
what it does,
Let's continue tracing
the code...
:0040A2FD 56 push esi --------> The user name is pushed, in order
to
Upcase it's chars.
* Reference To: USER32.CharUpperA, Ord:0000h
|
:0040A2FE E80F330000 Call User!CharUpper ---> After this, our name is in
upper case.
:0040A303 56 push esi -----> Our name in upper case here.
* Reference To: cw3220mt._strlen, Ord:0000h
|
:0040A304 E86F300000 Call 0040D378 ---> This is the length of our name.
:0040A309 59 pop ecx
:0040A30A 8BC8 mov ecx, eax ---> ECX=Length.
:0040A30C 83F904 cmp ecx, 00000004 ---> Length>=4 (MUST).
:0040A30F 7D05 jge 0040A316 ---> Let's go to this address...
:0040A311 83C8FF or eax, FFFFFFFF
:0040A314 EB67 jmp 0040A37D
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A30F©
|
:0040A316 33D2 xor edx, edx
:0040A318 33C0 xor eax, eax
:0040A31A 3BC8 cmp ecx, eax
:0040A31C 7E17 jle 0040A335 ---> (Not important, just another useless
checking).
===================================================================================
============ FROM HERE AND ON, THE IMPORTANT CODE, PAY ATTENTION ==================
===================================================================================
One thing before we continue, EDX = 00000000h as we enter to the next instructions.
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A333©
|
:0040A31E 0FBE1C06 movsx ebx, byte ptr [esi+eax] ---> EBX <--- char in user
name, offset EAX.
:0040A322 C1E303 shl ebx, 03 -----> Hmm, it shl's the char by 03h...
(Remember that).
:0040A325 0FBE3C06 movsx edi, byte ptr [esi+eax] ---> Now EDI <--- Char in
user name , offset EAX.
:0040A329 0FAFF8 imul edi, eax -----> It multiplies the char by the
offset in user name! (Remember that).
:0040A32C 03DF add ebx, edi -----> Adds the result to EBX (That was
Shelled (Ding Dong =)).
:0040A32E 03D3 add edx, ebx -----> EDX=EDX+EBX!!! - This is the CORE
of this registration routine!!!
:0040A330 40 inc eax -----> Increase EAX by one (next char).
:0040A331 3BC8 cmp ecx, eax
:0040A333 7FE9 jg 0040A31E ----> If ECXloop.
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A31C©
|
:0040A335 A120674100 mov eax, dword ptr [00416720] ---> HMMMMMM, What's in
here?????
:0040A33A C1F803 sar eax, 03 ---------> WAIT! Please type in SIce '?
EAX'
Does this number in EAX look
familiar to us? ;-)
If you still don`t understand,
than, It's
our SERIAL NUMBER! (PLEASE, take
your time, and check by
yourself - don`t trust me!). OK,
so now we know,
That it SHR's EAX by 03 (SAR is
almost identical to SHR).
:0040A33D 03D0 add edx, eax ---------> Hmm, it adds the result from the
loop, the serial number shr'd by 03h
:0040A33F 52 push edx -------> Let's continue. (At this point, I
can tell you , the reg number, is
in EDX - only that the reg number
is in HEX --> That's how you enter it).
* Possible StringData Ref from Data Obj ->"%lx"
|
:0040A340 685EF54000 push 0040F55E
:0040A345 8D95B0FEFFFF lea edx, dword ptr [ebp+FFFFFEB0]
:0040A34B 52 push edx
* Reference To: USER32.wsprintfA, Ord:0000h
|
:0040A34C E8E5320000 Call 0040D636 -------> This one, does HEX2STR (Takes
the value from EDX, and turns it to an hex string).
:0040A351 83C40C add esp, 0000000C
:0040A354 8D8DB0FEFFFF lea ecx, dword ptr [ebp+FFFFFEB0] -----> type 'd ecx' -
THIS is the reg number! That's enough for us, the rest of
the code, is
just for comparing the correct reg code with ours.
:0040A35A 51 push ecx
* Reference To: USER32.CharLowerA, Ord:0000h
|
:0040A35B E8B8320000 Call 0040D618
:0040A360 8D85B0FEFFFF lea eax, dword ptr [ebp+FFFFFEB0]
:0040A366 50 push eax
:0040A367 FF750C push [ebp+0C]
* Reference To: cw3220mt._strcmp, Ord:0000h
|
:0040A36A E875300000 Call 0040D3E4
:0040A36F 83C408 add esp, 00000008
:0040A372 85C0 test eax, eax
:0040A374 7405 je 0040A37B
:0040A376 83C8FF or eax, FFFFFFFF
:0040A379 EB02 jmp 0040A37D
* Referenced by a (U)nconditional or ©onditional Jump at Address:
|:0040A374©
|
:0040A37B 33C0 xor eax, eax
* Referenced by a (U)nconditional or ©onditional Jump at Addresses:
|:0040A314(U), :0040A379(U)
|
:0040A37D 5F pop edi
:0040A37E 5E pop esi
:0040A37F 5B pop ebx
:0040A380 8BE5 mov esp, ebp
:0040A382 5D pop ebp
:0040A383 C3 ret
Making the actual Keygen
~~~~~~~~~~~~~~~~~~~~~~~~
Now, after I've explained how does the program calculate the registration
code, you can either write your own keymaker, without looking at my code, or
look at my code (in Turbo Pascal - sorry for all you C lovers ;-) Next time).
That's it, here's the source of my keygen:
------------------- Cut here ---------------------------------------------
Program W3FilerKeygen;
var
Key,SerialNum,EB,ED,digit:Longint;
I,x:Byte;
Name,KeyHex:String;
begin
Writeln(' W3Filer32 V1.1.3 Keymaker');
writeln('Cracked by ^pain^ ''97 / Rebels!');
Write('Your Name:'); { Read the name }
readln(Name);
Write('Serial Number:');
readln(SerialNum); {Yes, we need the serial number for the calculation!}
Key:=0;
x:=0;
For I:=1 to length(Name) do
begin
Name[I]:=upcase(Name[i]);
If Name[I]<>' ' then begin
eb:=ord(Name[I]) shl 3; {EB = Name[I] Shl 03h}
Ed:=ord(Name[I]); {ED = Name[I]}
ed:=ed*(x); {ED=ED*Offset}
inc(x);
eb:=eb+ed; {Add ED to EB}
Key:=Key+EB; {Add EB to KEY}
end;
end;
Key:=Key+(SerialNum shr 3); { Add SerialNum shr 03h to Key}
{ From here, this is just HEX2STRING --> I`m quite sure it's
Self explaintory, else - go and learn number bases again! ;-)}
KeyHex:='';
repeat
digit:=Key mod 16;
key:=key div 16;
If digit<10 then KeyHex:=Chr(Digit+ord('0'))+KeyHex;
If digit>10 then KeyHex:=Chr(Digit-10+ord('a'))+KeyHex;
until key=0;
writeln('Your Key:',KeyHex);
writeln(' Enjoy!');
end.

How To Make Free Phone Calls

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:52:00 +0000

How To Make Free Phone Calls

Have you ever got stuck some ware and just about 6'ft away from you there is a pay phone, but yet you dont have any change(=( bummer) to call your famaly members or some one to come and pick you up(hehe that sux)?

Well im going to show you some thing that might get you arrested(shit now what) or it might get you home( now thats what im talking about!)its a chance that you have to take depends were are you.

Ok now before we go on let me let you know that this is not thateasy to do, but anyways lets start. A pay phone is not like a regular home phone. A pay phone runs through a diffrent amount of electricity and wires even the electricity flow is diffrent, Well anyways that is enoght of electrical talk lets get to the good part.

Ok to get free call's on a pay phone you will frist have to twist the phone wire just about 50 to 60 times then you will pull on the phonewire untill the metal part crackes off phone keep doing it if the metalpart is completely off the phone....
Now assuming that it is off you willsee a few colored wires in side the metal wire of the pay phone there should be a black, red, yellow one in side it and a really metallthick one in the middle(NOTE that some phone has diffrent colored wires)now the one wire that we are looking for is the black one. Now here ishow its done.. rip off the plastic of that wire(you can take it out with your teeth, you wont get electricuted =) hehe ).

Now assuming that you have taken apart the plastic off the wire(does not has to be all of it)now you will take that wire and aply it to the phone with the metal part of the phone touching the wire that you ripped off its plastic.. if you are aplying it correctly then you should here a static on the phone.. so make sure you have that phone on your ear.. now with the wire being aplyed to the phone(the metal part right next tothe buttons)Dial the number that you wish to call.. onces you hear it ringing then you can let go of the wire that you was applying.. and BINGO... say hello to mami and daddy for me =).. welp that is all enjoy your call.. ohh and by the wayyes this also comes with long distance hehe, and no! you can not use it to logg on to aol... Peace.

site: www.h4ckerx.net
Aim: xlordt
Irc: irc.h4ckerx.net

Email: xlordt@h4ckerx.net

Copyright @h4ckerx.net

How To Make An Animted Logo

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:51:00 +0000

How To Make An Animted Logo, the easy way

Things you will need:
QUOTE
1. Photoshop or Paintshop (any versions)
2. Xara3D 5.xx
3. Jasc animation shop 3.xx
4. DUH!! A pic you want as a logo LOL

Things you MIGHT need:
1. a computer
2. Internet connection
3. consciousness
4. corn on the cob

Here they are for your convinience:
Adobe Photoshop CS v8.0 thanx to TheCollector
http://www.shareordie.com/index.php?showto...85&hl=Photoshop

Jasc Paint Shop Pro 9.0 Retail thanx to arclite
http://www.shareordie.com/index.php?showto...&hl=Jasc&st=100

Xara3D 5.02 thanx to Zabref
http://www.shareordie.com/index.php?showtopic=6512&hl=XARA

Jasc Animation Shop 3.11 thanx to sev7en
http://www.shareordie.com/index.php?showtopic=34928&hl=

Steps:
1. Using your photo editor fix/touch up you pic/logo to your liking….too easy(example bellow)
user posted image

2. Save it some where easy to find, for example “C:\pictures” or “C:\Windows\thecenterofhell\system\system32\system64\system128\???” although I don’t recommend the second one.

3.Open Xara3D 5.xx, press “Alt+T” or click on the “T” button on the LEFT PANEL erase all of the text in the window that pops up then press ok.
user posted image
user posted image

4. Press “Alt+U” or click on the yellow “U” surrounded in gray on the LEFT PANEL, check the “button” box and select a desire button type and leave this option window open you will need it again.
user posted image

5. Press the “At+X” or click the black “X” on the LEFT PANEL, click “load texture” in the pop up window, find the picture you made/adjusted and highlight it then click open or just double-click it. Use the “size, x, y, angle” sliders to adjust the picture or “texture” and in the “button options” windows use the “stretch, corners”(corners, only if using this option you can adjust) to adjust the button size.
user posted image

6. Press “Alt+A” or click the black “A” on the LEFT PANEL with what looks like to me is a half-halo with an arrow tip!? Anyway, here is a quick rundown on what the options here do: (BY THE WAY TO ACTIVATE OR “PREVIEW ANIMATION” PRESS “Ctrl+spacebar”).
user posted image

A. Frames per cycle: This is the number of frames for each complete cycle through the animation sequence. The greater the number of frames the smoother the animation. The drawback is that the file is bigger - this is a big disadvantage for web graphics. You may need to try different values to get the best results.
B. Frames per second: The animation speed. Slow speeds can give jerky movement. High speeds can also give jerky movement as the program displaying the animation may not be able to keep up. Again you may need to try different values.
C. Pause: This pauses the first frame before continuing the rest of the animation. Type in a value in centiseconds (1/100ths of a second) - a 2 second pause is 200 cs. Note that this applies only to the first frame; use Frames per cycle and Frames per second to control the overall speed of the animation.
D. Loop Value: Unchecked is Infinite, Any other value see for yourself. Lmao
E. Loop: This lets you specify how many times the animation should repeat itself. Note that some browsers take any value other than 1 to mean 'loop forever'. Therefore, your animation either plays once or forever.
F. Style: This controls the type of animation:
Rotate 1 rotates all the text as one; Rotate 2 rotates each character. (Buttons have a single Rotate option.) Rotate text/Rotate lights - select whether you want the text to rotate or the lights or both. You cannot rotate the shadow as this would create very large files. Direction - selects the direction of rotation.

Swing options: Swing 1 swings all the text as one; Swing 2 swings each character. (Buttons have a single Swing option.) Angle - how much you want the heading to swing.

Pulsate options: Pulsate 1 pulsates all the text as one; Pulsate 2 pulsates each character. (Buttons have a single Pulsate option.) Minimum text size - how far back to pulsate the text. Shrink+Grow & Grow+Shrink - only have an effect if you Pause the animation. These options select the starting point for the animation (maximum or minimum.)

Fade options: Fade in - the heading emerges from the background color. Fade out - the heading merges into the background color. SO AFTER PICKING ONE………………..

7. On the top left go to FILE>>>EXPORT ANIMATION or press “Ctrl+Shift+X” and save in desired location.
user posted image

8. When the next window pops up (Export as animated gif save location then options): Experiment with each one to get it right, but remember the SoD rules about Siggys and Avatars.
user posted image
user posted image

Because Animated GIFs can be quite large, you may find that a 16 or 32 color, optimized palette per frame, produces the best results for the smallest file size. However you might need to experiment.
Dithering always makes GIFs look better, but also makes them larger. When outputting at 256 colors you may find that there is no need to turn dithering on.
Current Window Size lets you export just the area surrounding the text (Crop on) or the entire window area (Crop off.)
User Defined lets you specify the dimensions of the bitmap.

How to make a VCD from a DivX

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:51:00 +0000

Tools required: Latest Virtual dub, TMPGEnc and Nero ( and the DivX codecs.)

Preparing:
Download all tools, Be sure to install DivX 3.11 DivX4 and the latest DivX5 codecs.

Extracting the audio : Start Virtualdub. Open your video File->Open video file.(if you get any warnings just ignore them because you won't edit the video just extract the audio)
Select File->File Information and note the fps as the video source fps because you will need it later.
Select under Audio->Full processing mode.
Select Audio->Compression and select
Select Audio->Conversion.
Change the the Sampling rate to 44100Hz if you are going to make VCD or SVCD MPEGs.
Save the wav by clicking on File->Save WAV...the wav will be a huge audio uncompressed video file(about 10 MB/minute.
Encoding:
Start TMPEnc. Press cancel if the Project Wizard comes.
Press Browse… and select the DivX file as Video source input.
Now you press the Browse button for choosing the Audio source input and use the saved wav file.
Press load and load the file which in the Template directory of TMPGenc.
If the video source fps is 29,970 load VideoCD (NTSC).mcf
If the video source fps is 23,970 load VideoCD (NTSCFilm).mcf
If the video source fps is 25,000 load VideoCD (PAL).mcf
If the video source fps is anything else else just load NTSC if you live in US or Japan and PAL if you live anywhere else.
Note if you live in US or Japan and get problem playing PAL, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not then instead convert it to NTSC by loading the VideoCD(NTSC) template.
Note if you live Europe and the rest of the world and get problem playing NTSC or NTSCFilm, often causing black and white TV playback problems, then first check if you can change to PAL on your TV or DVD Player if not convert it to PAL by loading the VideoCD(Pal) template.

Press Settings and choose Advanced.
Select Full screen (keep aspect ratio) under Video arrange method to keep the same aspect ratio(widescreen,fullscreen) as the video source(if you have a widescreen movie and you want it to be in fullscreen select No margin(keep aspect ratio).
Select Source range and double-click on it with the mouse.

In the next dialog you can choose the source range. This process depends on the DivX file. If the DivX file is less than 80min (for a 80min/700mb CDR) then you do not have to split the file to two CDs. Also if the DivX file is already in two parts you have just to convert the first file and then the second. But if there should be the case that the movie is in one file over 80minutes long then it is necessary to select the source range. In this new dialog you put the horizontal scrollbar to the middle of the selection so that you will get the same length on the first CD as on the second. After you selected the middle do you have press Set end frame. A new value should be under End Frame. This value you should notice somewhere for the encoding of the second part. Of course the start frame must be 0.

After pressing ok, you only have to select the output file name. I prefer the movie name with the CD number (e.g. Ghost in the Shell CD1) for the burning.
Now encode the file by pressing the Start-Button.
While encoding you can select File->Preview(it won't effect the encoding) to see how the output will be, it it looks wrong(widescreen or fullscreen) you can stop the encoding and start over and change especially the Settings->Advanced->Video arange method.)
If you only want to burn the movie on one CD jump to the burning guide else follow the next points.

Repeat the third, forth and fifth point. In the source range dialog you now use as Start frame the noticed value and move with the horizontal scrollbar to the end of the movie.
After pressing Set end frame, press two times OK.

Now select the output filename for the second file. (e.g. Ghost in the Shell CD2) and encode it.
After the encoding is done and you did all right, you should have for every CD a file.

Burning:
Launch Nero.Close the Wizard. Select File->New.
1. Select VideoCD
2. Select PAL or NTSC depending what format your source MPEG is in.
3. And hit New.

1. Locate your .mpg and drag it(see picture below). Remember that you can add several .mpgs also, each mpg will be a own track on the VCD and you can add data files also, just drag them to any folder.
2. Check the time. It should be the same as in the movie.

3. Rename the CD to anything you like by clicking F2 on NEW.

4. Select File->Write CD.

don't know about everyone else.. but the only options i choose on tmpgenc to make mpeg-1 files are either NTSC film 23.976, or NTSC video 29.97 fps..

i also live in the u.s. so i do all of mine accordingly.. why do you save the wave file with virtual dub.. or should i say, why do you even process the divx file with vdub.. yeah if it is your last resort and the divx for some reason doesn't open in tmpgenc.. i've got 180+ Divx movies, some downloaded mostly ripped, never had a problem encoding them with tmpgenc plus.

just seems like you are going from your a$$ to your elbow to do this.

1. take divx movie (120 minutes long for example).. open with vdub.. find a keyframe about halfway through the film, preferrably at a scene change.

choose "SET SELECTION START" from the EDIT menu.. scroll all the way to the end of the film, choose "SET SELECTION END"... hit DELETE or choose "DELETE SELECTION", all from the EDIT menu

2. Now you have 1 half of your movie. under the VIDEO menu, choose "DIRECT STREAM COPY", also make sure that under AUDIO is going to generate a "DIRECT STREAAM COPY". Then go to FILE and choose "SAVE as AVI..."

on a newer computer this will take less than 2 minutes..

3. When it is complete, the quickest way to proceed is to just click on FILE / "OPEN VIDEO FILE". at the beginning of the clip, choose "SET SELECTION START" again, snap back to the keyframe (half way through the film) which you cut half the film off at and choose "SET SELECTION END". DELETE... FILE / "SAVE AS AVI..." save as the other half of film..

once again, will usually take less than 2 minutes...

4. choose option accordingly, this next part can be important.. (i'm going to give the rest of the instructions as if you were making ntsc movie)

since you want to make a standard mpeg-1 file, choose NTSC FILM or NTSC VIDEO.. BROWSE for your file, then hit NEXT, then it OTHER SETTINGS / ADVANCED tab ... now there is an option that says "VIDEO ARRANGE METHOD".. if you are making a fullscreen movie, lleave on FULLSCREEN.. if you are encoding a widescreen movie, choose "FULL SCREEN (KEEP ASPECT RATIO).. OK / NEXT / NEXT (you get the point)

basically takes 1 step out of the tutorial above.. the instructions for nero appear to be correct.. but here's another tip..

dvd burners are becoming more and more popular and even i got one now, like many of you do. tired of old vcd's or wanna encode a VCD standard DVD with nearly 9 hours of video (but same quality as normal 80 minute VCD),

if this is the case, make sure you encode your DivX files as "NTSC VIDEO 29.97 FPS".. even if source is 23 fps... and once you have 3 or 4 movies, get yourself a proggy called TMPGENC DVD AUTHOR.. make a track for each movie.. and you got yourself a dvd with 3 or 4 average length movies on 1 dvd (with menus if you like) that is WAY MORE COMPATIBLE than a VCD..

do a search for the keyword VCD-DVD and i posted a more descriptive tutorial on how to do this..

How To Make A Transparent Background, .fla .swf

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:49:00 +0000

is good for saveing the file size:

http://www.adesdesign.net/php/tutorials/other/transparent_flash.php

how to make a new web site

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:48:00 +0000

how to make a new web site
http://www.make-a-web-site.com/
http://www.pagetutor.com/pagetutor/makapage/index.html
www.webmonkey.com

Colour Palletes
http://colormatch.dk

HTMLlock <---Need

http://www.devside.net
http://www.devside.net/download/crypto/disclaimer1.html

well, if you want text seperate from image, you could just do this:

your text here, it's totally fun, yeah yeah yeah

if you want to have the image on the left side, and text on the right side, just reverse the code like so:

your text here, it's totally fun, yeah yeah yeah

How to make a kvcd or

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:45:00 +0000

How to make a kvcd or in other words how to get 700meg avi file down to about 450megs to make
a vcd without any picture loss

so youve download a movie its in avi format you want to watch it on your dvd player so
you reencode it it comes out to about 1100 maybe 1200 megs so you got to split it and save on
2 disks well the following tut will show you how to do it on one disk

first you are going to need some tools

virtualdub

CODE
http://heanet.dl.sourceforge.net/sourceforge/virtualdub/VirtualDub-1.5.10.zip

heada3che

CODE
http://mitglied.lycos.de/darkav/download/headac3he-0.23a.rar

and some dlls

CODE
http://mitglied.lycos.de/darkav2/download/MPAlib_MMX-1.00(1.50).rar
http://mitglied.lycos.de/darkav2/download/ssrc_MMX-1.01(1.28).rar
http://mitglied.lycos.de/darkav2/download/Vorbis_MMX-1.20(1.74).rar
http://mitglied.lycos.de/darkav2/download/Lame_enc_MMX-1.28(3.93).rar
http://mitglied.lycos.de/darkav2/download/MP2enc_MMX-1.15(1.13).rar

put the above dlls in the same folder as heada3che

besweet

CODE
http://dspguru.notrace.dk/BeSweetv1.4.zip
http://dspguru.notrace.dk/BeSweetGUIv0.6.zip

put these 2 in the same folder

you will have to have nero as well but im hoping you have that already if not it on this forum

tmpegnc

again its on this forum

you will need some templates

CODE
http://www.kvcd.net/dvd-models.html

right click all the pal templates if your dvd player is pal or ntsc if ntsc

save them to the template folder in the tmpegnc folder

so to begin

open virtualdub

goto file
open video file

locate the avi file you want to convert
if you get a warning ignore it
click the audio button at the top
make sure source audio and direct stream copy have a black dot next to it
goto file
save wav
now you have to call this with a .ac3 extension
for example view from the top.ac3
i would save this in the same file your avi is
so youve named it press save
box will open let it do its thing this is taking the sound from the film
now press audio and select no audio
you should have a black dot next to no audio and direct stream copy
goto video
select direct stream copy
goto file save as avi
save the file what you want again put in the same folder as the original avi
to make life easier i call mine the film title no sound ie viewfromthetopnosound
press save
this is now saving the film without sound

you can now close virtualdub

open besweet
scary looking box appears
dont worry heres what to do
at the besweet.exe locate the besweet folder it will show besweet.exe in the enter file name box
click on this and at the bottom it will say valid press ok
now goto input and find the ac3 file we just made you will need to change the enter file name from .Lst to .ac3
double click on the ac3 file you made and at the bottom it will say valid press ok
now looking at the gui make sure Use ac3 decoder is tick
downconvert sample rate is ticked
in the toolame dropdown box make sure it says mp2 leave the rest alone
now press copy command to clipboard
goto start
run
and right click paste
press ok
if all the settings are correct a black box will open and the ac3 will be transcoding to mp2
if not check the boxes are ticked
if ok leave it to do its thing
once the black box has disappered close besweet

open heada3che
hopefully you put all the dlls in the heada3che folder other wise you will get error messages
so make sure you do that
done it ok lets go
press source file
find the new mp2 file we just made
change the destination format to mp2
press start
thats it once its finished close headac3he

for your info
things are going to start looking messy inside your folder so if you want
you can delete some things
goto the folder where youre original avi file is
you can delete the ac3 file
and the mp2 file without the .2 in it
ie you will have two file names the same one with .2 on the end keep this one
this is so we dont get confused later

open tmpegnc
close the wizard if it opens
press the video source browse button
find the file we made with nosound on the end ie viewfromthetopnosound
now if you had gone to the kvcd page and downloaded all the templates this will help
if not go do that now
done it right lets go
now im afraid im not in front of your pc doing this for you so i hope i explain well
press load
you will see a load of files in front of you some starting with kvcd
right this is trial and error stuff now pick the first one begining with kvcd highlight it press open
now press start what will happen is the preview box in front of you will start encoding
now depending on the make up of the original avi file will effect the outcome of the finished film
so if you look at the box and all you see is a tiny box with film thats the size it will come out
if it looks weird press stop and reload a different template the best result is one that looks like widescreen
i hope that made sense

just press start and overwrite the file
any way let it do its thing depending on your pc specs depends how long this takes

so lets assume its done
press file mpeg tools the first box should be simple multiplex press the video input browse button
and find the new file we just made it will have a m1v extension
press the audio input browse button find the mp2 file with the .2 in the title the output
box will be automatically set to mpeg
press run
let it do its thing

close tmpgenc

open nero
select vcd
untick the create standard compliant cd
press new
find the new file we have made it will be in the original avi folder but will have a mpeg extension
now you have to drag this into the left box dont right click and copy to compliation
a box will appear and a blue line will go across if a warning comes up with not being a compliant vcd ignore carry on
press burn and burn at the speed you want
once finished press the ok box
press done the disk will come out and now to test
put it in your dvd player and hay presto the film kicks in

depending if your dvd player can play vcds that is

that i cant help you with

How To Make 5cds, 10cds Or 2dvds From Official Dow, These are same as Mandrake PowerPack+

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:44:00 +0000

Download the full official tree. It comes in at over 5 gig. The full tree includes the usual mandrake, 3 gig of extra apps under contrib and 330meg of java apps under contrib/jpackage.

After downloading I have successfully created 4 versions including the Hard Drive Installation.

1) Hard Drive/Network/FTP Install (same thing)
2) 10 CD version including everything
3) 5 CD Version (use to be 4 CDs. This will eventually be the ISO download)
4) 2 DVD Version which includes everything int the 10 CD Version.

Additionally I have discovered that Mandrake is stressing everyone for no apparent reason. The much talked about 8 meg boot.iso file that is needed to be able to boot and chose your method of installation, is no different from the regular boot files that come on CD1 of any version.

The only thing you have to do is to edit the file "isolinux.cfg" in the isolinux folder. Inside the file, remove all instances of "automatic=method:cdrom" and save the file. Then create the images for whichever "version" of mdk10 that you choose. To create the different versions that I have listed above you have to do 2 things first:

1) edit the "hdlist" file in the "Mandrake/base" folder. In this file you will find a list of all the hdlist.cz files needed to build a particular version. Remove the 3 lines for "SRPM" files. Now depending on which version you want to create, the 10CD and the DVD versions will have 3 lines.
a) hdlist.cz Mandrake/RPMS Installation CD
hdlist2.cz Mandrake/RPMS2 Contrib CD
c) hdlist3.cz Mandrake/RPMS3 Jpackage.org
take note of the paths above. if you downloaded the whole tree like I did, you will have these folders. The RPMS folder is the standard 4 or 5 CD download version. The RPMS2 and RPMS3 folders added to the RPMS folder make the 10CD and DVD version. So to make the 5CD version, remove the last two lines. Dont forget to backup the original "hdlists" file.

2) To make the 10 CD or 2 DVD version, use the "mkcd"command below. Use 716800000 discsize for the 10CD version and 4000000000 for the 2 DVD version. When the command finishes, the images will be in the directory you specified after the -t option.

To make the 5CD version, move the folders "RPMS2" and RPMS3" someplace safe and don't forget to remove the last two lines in the "hdlists" file as described above. The RPMS2 and RPMS3 folders are only links so it should take no time at all to move them. Then use 716800000 discsize and run the "mkcd" command. Don't forget to move the RPMS2 and RPMS3 folders back to their original location when you finish your 5CD images.

Also rememeber that you will need plenty of disc space if you wantto keep all the images for all version on your hard drive. I have the 10CD, 5CD, 2 DVD and the HD install files all on my hard rive and they take up 23GIG.

mkcd --discsize 716800000 -t ./5CD-Version -a -s ./hdinstall

--discsize is the size of the image you want to make in bytes. the above figure is for a 700M CD. I used 4000000000 (9 zeroes) to make 2 DVDs.

-t

-a means automatic creation based on the hdlist files and the downloaded directory structure. It keeps you from having to use many other ugly options on the command line.

-s this is the top fodler not thr RPM folder. This top folder will have the "Mandrake" folder in it.

original Link
CODE
http://linuxiso.org/forums/viewtopic.php?t=18140

How to: Install and run Windows CE on your USB Stick

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:43:00 +0000

How to: Install and run Windows CE on your USB Stick

Portable Windows CE is a 'launcher' for the Windows CE device emulator that can run an emulator-based image from a USB keychain.

Download the Windows CE 5.0 Device Emulator.
Code:
http://www.Mcft.com/downloads/details.aspx?FamilyID=A120E012-CA31-4BE9-A3BF-B9BF4F64CE72&displaylang=en

Change "Mcft" in link to what it is supposed to be icon_wink.gif

Extract the emulator to a folder on your hard drive by running "setup /a". The installer will prompt you to specify a directory to extract to . For example: D:\PortableCE

Download this launcher script:
Code:
http://www.furrygoat.com/Software/launchce.cmd.txt

Copy the following launcher script to the directory you extracted the setup to. You'll need to rename the file from launchce.cmd.txt to launchce.cmd
Once you have that set up, just copy the entire D:\PortableCE folder over to your USB keychain.

To launch the emulator, just plug in your USB keychain, navigate to the PortableCE folder, and run launchce.cmd. You should (hopefully) have the emulator fire up.

How To Increase Download Speeds By 100-200 Kbsec

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:40:00 +0000

First of all download this wonderful program:

h@@p://www.speedguide.net/files/TCPOptimizer.exe

Then when u start trhe program goto settings goto cable modem or dsl whatevcer u have.

Go to MaxMTU and set it to 1500 this is optimal anything above this will not work as well.

Thats bout it!! Enjoy the speed!!

How to Hide in the (Network) Neighborhood

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:34:00 +0000

How to Hide in the (Network) Neighborhood

Don't want your XP computer to show up in the network browse list (Network Neighborhood/My Network Places) to other users on your network? One way to accomplish that is to disable file sharing. To do this, click Start, right click My Network Places and select Properties. Right click your local area connection and click Properties. Uncheck the box that says File and Printer Sharing for Microsoft Networks. Click OK.

But what if you want to be able to share folders with some users; you just don't want everyone on the network to see your computer's shares? There's a way:

Click Start and select Run.
In the Run box, type net config server /hidden:yes
Click OK.
Now others who know the UNC path (\\computer name\share name) can connect to your computer's shares from the Run box, but it won't show up in the network browse list.

How to hack/change your Windows XP Boot Screen

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:31:00 +0000

How to hack/change your Windows XP Boot Screen

HACKING THE XP BOOT SCREEN

This is a very simple trick to do if you have done the same for the logon screen and the start button. There are 2 ways to do this trick that I know about one is doing it manually and the other is using a program called bootxp. I am going to tell you the manual way to do it, but if you want to know the other way just let me know, so I can do an update to the guide. Now once you have downloaded your ntoskrnl.exe file save it a general location so that you will have easy access to it, like my folder.

Once you have ntoskrnl.exe file in an easy access folder, restart your pc into safe mode. Once into safe mode go to the folder where your files are located.

Now that you are there copy the file that you want to change your boot screen too. Once you have copied that file, hit the window key + r or type %windir%\system32 in the run command, so that folder as follows.

Once there paste your new file into the folder and overwrite the existing folder.

Now that you have your new file in the folder restart your pc as you normally would and your new boot screen should appear. You can download this bootscreen here.

ALWAYS BACKUP EVERYTHING YOU EDIT OR DELETE. I'M NOT RESPONSIBLE IF YOU MESS YOUR COMPUTER UP BY DOING THIS HACK OR ANY TYPE OF HACK. DO IT AT YOUR OWN RISK.

Image and ntoskrnl.exe files provided by www.themexp.org

or
u can go to

code:

http://www.overclockersclub.com/guides/hackxpbootscreen.php

How to hack Windows XP Admin Passwords

noreply@blogger.com (Unknown) — Wed, 27 Jan 2010 15:29:00 +0000

How to hack Windows XP Admin Passwords the easy way by Estyle, Jaoibh
and Azrael.
------------------------------------------------------------------------------
This hack will only work if the person that owns the machine
has no intelligence. This is how it works:
When you or anyone installs Windows XP for the first time your
asked to put in your username and up to five others.
Now, unknownst to a lot of other people this is the only place in
Windows XP that you can password the default Administrator Diagnostic
Account. This means that to by pass most administrators accounts
on Windows XP all you have to do is boot to safe mode by pressing F8
during boot up and choosing it. Log into the Administrator Account
and create your own or change the password on the current Account.
This only works if the user on setup specified a password for the
Administrator Account.

This has worked for me on both Windows XP Home and Pro.
-----------------------------------------------------------------------------
Now this one seems to be machine dependant, it works randomly(don't know why)

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:
(this appeared on www.astalavista.com a few days ago but i found that it wouldn't work
on the welcome screen of a normal booted machine)
-----------------------------------------------------------------------------
cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos
-----------------------------------------------------------------------------
Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.
Once this happens if you enter this command minus the quotes
"net user password"
If the Administrator Account is called Frank and you want the password blah enter this
"net user Frank blah"
and this changes the password on franks machine to blah and your in.

Have fun
p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks
Any updates, Errors, Suggestions or just general comments mail them to either

HOW TO GET ANY WINDOWS PASSWORD

noreply@blogger.com (Unknown) — Thu, 14 May 2009 20:48:00 +0000

ok..... here are the full details.....

this works whether its windows 2000 or windows xp or windows xp SP1 or SP2 or windows server 2003....

this works even if syskey encryption is employed...

if it is FAT filesystem...

just copy the sam file like stated in the first post to an empty floppy disk and take it home. I'll tell u what to do with it later... DON'T DELETE THE ORIGINAL SAM FILE. just remove its attributes. the sam file is a file called SAM with no extension. YOU MUST ALSO GET.... a file called SYSTEM which is in the same folder as SAM. both files have no extensions...

if it is NTFS....

u have to download a program called NTFSPro.... it allows u to read from ntfs drives... the demo version allows read only. the full version is read-write.... you use the program to create an unbootable disk (so u will still need another bootable disk and an empty disk) that has the required files to access NTFS.

use the boot disk to get into dos, then use the disks created with ntfspro to be able to access the filesystem, then copy the SAM and SYSTEM files to another empty disk to take home....

AT HOME: u have to get a program called SAMInside. it doesn't matter if it is demo version. SAMInside will open the SAM file and extract all the user account information and their passwords, including administrator. SAMInside will ask for the SYSTEM file too if the computer you took the SAM file from has syskey enabled. syskey encrypts the SAM file. SAMInside uses SYSTEM file to decrypt the SAM file. After SAMInside finishes, u still see user accounts and hashes beside them. the hashes are the encoded passwords. Use SAMInside to export the accounts and their hashes as a pwdump file into another program, called LophtCrack. it is currently in version 5, it is named LC5. the previous version, LC4 is just as good. u need the full or cracked version of the program. LC5 uses a brute force method by trying all possible combinations of letters numbers, and unprintable characters to find the correct password from the hashes in the pwdump file imported into it from SAMInside. This process of trying all passwords might take 5 minutes if the password is easy, up to a year if the password is long and hard (really really hard). LC5 howver, unlike LC4, is almost 100 times faster. both can be configured to try dictionary and common words before using all possible combinations of everything. Once the correct password is found, it will display the passwords in clear beside each account, including administrator.

I use this method so many times. I've compromised the whole school computer infrastructure. LC4 usually took between 1 second and 10 minutes to find the passwords because they were common words found in any english dictionary. I haven't used LC5 yet.

If there is anything unclear, anything I overlooked, plz tell me so that I can turn this into a very easy to follow tutorial to help anybody crack any windowz pass.

Programs needed: SAMInside (doesn't matter which version or if demo)
LC4 or LC5 (lophtcrack)( must be full version)
NTFSPro (doesn't matter if demo)
any bootdisk maker

Cracked or full version software can be found on any warez site. If u don"t know what that is or where to get the programs, post a message and I'll tell u or give them to u.

P.S: I might not keep track of this forum, because I'm going to create a new topic and post tutorial there. if u want to post, plz post there.

How to fix Windows Installer problem

noreply@blogger.com (Unknown) — Thu, 14 May 2009 20:48:00 +0000

 Do you experience this kind of problem whenever you attemp to install an application in windows box (2k, xp)?

"The Windows Installer service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."

The ms website knowledge article 324516 gives 2 methods as a way of fixing this problem, but you might be very lucky if any of the 2 fixes the problem, alot of guys end up formating their systems and doing fresh windows installations or try wired ways of fixing it.

Well, the solution is very easy:

1. right click your root windows installation drive i.e drive where you installed windows
2. click properties at the bottom
3. select security tab
4. click Add and scroll down to SYSTEM account click add and click OK.
5. allow Full control permission and click Apply and then Ok.

This should solve your problem with windows installer.

How to fix corrupted files in XP

noreply@blogger.com (Unknown) — Thu, 14 May 2009 20:44:00 +0000

// Required //
+ Windows XP operating system
+ Windows XP cd

// Right to the tutorial //
+ Place the xp cd in your cd/dvd drive
+ Go to start
+ run
+ type in 'sfc /scannow' (without the ')

Now it should all load, and fix all your corrupted file on windows XP :)

How To Find Serial Numbers On Google

noreply@blogger.com (Unknown) — Thu, 12 Feb 2009 20:54:00 +0000

ok, this is a little trick that i usually use to find cd keys with google.

if your looking for a serial number for nero (for example) goto google.com and type nero 94FBR and it'll bring it up

this works great in google

HOW DOES THIS WORK?

Quite simple really. 94FBR is part of a Office 2000 Pro cd key that is widely distributed as it bypasses the activation requirements of Office 2K Pro. By searching for the product name and 94fbr, you guarantee two things.

1)The pages that are returned are pages dealing specifically with the product you're wantinga serial for.

2)Because 94FBR is part of a serial number, and only part of a serial number, you guarantee that any page being returned is a serial number list page.

I hope this trick help you finding your ccd keys easily

Enjoy :)