• Perfect for Airbrushing

This oilless diaphragm compressor is a tank mounted unit, designed for compactness and portability. The sturdy air tank stores reserve air volume and reduces pulsation. Air pressure in the tank is regulated with an automatic on/off limit switch to a maximum of 40 P.S.I. The unit has a five foot grounded 3 wire cord. The compressor features a 1/8 HP motor which operates on 115 Volts, 1 Phase, 60 Cycle and draws .8 Amps. 1.58 CFM @ 32 PSI…. more >>

>>Find more about Paasche D3000 Air Compressor and Tank

• 5/8″ Length
• 23 Gauge
• Pin Nails
• 2000 per Package

2,000 Pack, 23 Gauge x 5/8″, Pin Nails…. more >>

Rating: (out of 2 reviews)

>>Read more about 2000PK 23×5/8 Pin Nail

• 3 1/4″ x .131
• Smooth Shank
• Thickcoat Galvanized Finish
• 2000 Nails Per Box
• For Use in the Bostitch F28WW and N88WWB Industrial Wire Weld Stick Framing Nailers

Electro-galvanized corrosion resistant. Meets and/or exceeds ASTM A641. Fits: Bostitch N79WW, N80SB, N86S, N88WW and N100S…. more >>

>>See Bostitch S12D131GAL Thickcoat Clipped Head 3-1/4-Inch by .131-Inch by 28 Degree Wire Collated Framing Nail (2,000 per Box) other details

• Rear exhaust directs air away from work. Equipped with exhaust silencer for noise reduction
• Built-in regulator for postitive speed control. JSM-630 has dead handle for better control
• 360° head rotation provides versatility for every job
• Belt-tracking adjustment is conventiently located
• Comes with 120 grit sanding belt

JSM-620 This item features: -Belt Width: 3/4 in. -Belt Length: 20 1/2 in. -Power Cap.: 0.450 hp [Max]. -Machining Speed: 16000 sfpm. -Air Consumption: 18.400 CFM [Max]. -Pressure: 90.00 psi. -Noise Level: 82.0 dB [Max]. -Vibration: 3.1 m/s2. -Inlet Size: 1/4 in (NPT). -Hose Size: 3/8 in. -Length: 18 1/2 in. -Control Type: On/Off. -Handle Type: Pistol Grip. -Applications: Sanding. -Type: Belt Grinder/Sander. -Wt.: 3 lb. -Price is for 1 Each…. more >>

>>See Jet JSM-620 3/4-Inch by 20-1/2-Inch Pnuematic Belt Sander other details

• Economical Air Hammer
• 3,500 blows per minute
• Handles a wide range of cutting applications
• 5 piece chisel kit

This Ingersoll rand air hammer provides economical, fast cutting action. Includes 5-pc. chisel set. Blows Per Minute (BPM): 3,500, CFM at Load: 15, Stroke Length (in.): 2 5/8, Shank Diameter (in.): 0.401, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Chisels Included: Yes, Case Included: No… more >>

>>See Ingersoll-Rand 116K Standard Duty Pnuematic Hammer with 5 Piece Chisel Set other details

• Fewer jams
• Engineered to fit other manufacturers tools
• More completed drives
• Highest withdrawal values
• Less broken collation

Staple Senco 18 gauge… more >>

>>Read more about Senco L08BAB 18 Gauge by 1/4-inch Crown by 1/2-inch Electro Galvanized Staples (10,000 per box)

• 3000 blows per minute
• Tough 1-piece alloy barrel
• Tough, one-piece alloy barrel provides long life; produces up to 3,000 blows per minute
• Easy-to-maintain; includes “easy out” throttle valve assembly
• 1-year limited manufacturer’s warranty

Air Hammer – Super Duty – .401 Shank – 3/4In Bore – 3000 BPM Make fast work of body panel crimping and cutting, bushing driving, shearing and general front end work with this air hammer, a super duty tool that produces up to 3,000 blows per minute. Professional touch trigger for total control. Long-life tool with a tough one-piece alloy barrel. Easy to maintain, with an “easy out” throttle valve assembly…. more >>

>>More about Ingersoll Rand 121 Super Duty Air Hammer

• Gardner Bender #PCC-1525 25PKBLK Single Nail Staple
• GARDNER BENDER INC

25 Pack, Black Single Nail Staple, For Installation Of RG6 Coaxial Cable, Snap On Feature Allows Installer To Securely Place Staple On The Cable Prior To Nailing, Carded…. more >>

>>See Gardner Bender #PCC-1525 25PKBLK Single Nail Staple other details

• Up to 3500 blows per minute
• Handles a range of cutting applications
• Longer life alloyed steel barrel and heat-treated piston

This Ingersoll Rand air hammer provides fast cutting action, especially for medium exhaust system, panel cutting and general repair work. Blows Per Minute (BPM): 3,500, Air Consumption (CFM): 3, CFM at Load: 15, Stroke Length (in.): 2 5/8, Bore Diameter (in.): 1 1/16, Shank Diameter (in.): 0.401, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Chisels Included: No, Case Included: No… more >>

>>More about Ingersoll Rand 116 Standard Duty Air Hammer

• Fewer jams
• Engineered to fit other manufacturers tools
• More completed drives
• Highest withdrawal values
• Less broken collation

Senco 2-1/4 X .092 Ring Shank Stainless Steel Coil Nail EL23AGBH… more >>

>>Read more about Senco EL23AGBH .092 Gauge by 2-1/4 inch Length Stainless Steel Nail (3,600 per box)