Article, Software, Tip's&Trick

National SAR Agency Republic Of Indonesia

2010-12-23T23:55:00.000-08:00

In order to improve response time National SAR Agency in the air disaster handling, shipping and other disasters, the National SAR Agency operates the LUT equipment - MCC (Local User Terminal - Mission Control Center) as a means of early detection. LUT is the ground segment of the Cospas-Sarsat that serves to receive distress signals emitted by the Beacon.

There are 3 (three) types of Beacon:

1. EPIRB: Emergency positioning indicating radio beacon for ship

2. ELT: Emergency Locator Transmitter for aircraft

3. PLB: Personal Locator Beacon for individuals

Distress signal received and processed by the principle of Doppler effect for positioning data distres.Berdasarkan distress position, Basarnas Rescue Team immediately check to that location and if true disaster rescue action will begin immediately.

Based on the above cruise operators and airlines are expected to register Beacon held into the National SAR Agency so that in case of accident or cruise flight can be directly detected by Basarnas and as soon as practicable measures to be undertaken.

To View the form beacons that have been registered in the National SAR Agency Republic Of Indonesia Click here

To View the procedures for filling and form beacons Click here

Source: Web Site Basarnas

IBMSystem x3650 M3

2010-12-16T22:48:00.000-08:00

IBMSystems and Technology GroupData Sheet System x
IBMSystem x3650 M3
Performance-optimized server for mission-criticalapplications
Highlights:

IBM System x360 M3

●Improve cost-effectiveness with higherperformance per watt
●Simplify management and serviceabilitywith flexible design
●Manage risk with resilient architecturesand virtualized environments

Packed with innovation
The IBMSystem x3650 M3 provides outstanding performance foryour mission-critical applications. Its energy-efficient design supportsmore cores, memory and disk capacity in a scalable 2U package that’seasy to service and manage. With more computing power per watt andthe latest Intel®Xeon®processors, you can reduce costs while main-taining speed and availability.
Simplify management and serviceability
The x3650 M3 offers a flexible, scalable design and simple upgradepath to 16 HDDs or SSDs, and 192 GB of memory. Comprehensivesystems management tools such as advanced diagnostics, a cable man-agement arm and the ability to control resources from a single pointmake it easy to deploy, integrate, service and manage.
Reduce risk and maintain availability
With new 6Gbps RAID adapters integrated and double the I/O performance, the x3650M3 provides a resilient architecture ideal formission-critical applications as well as virtualization environments.Advanced memory support and greater disk capacity let you takeadvantage of higher processing speeds without sacrificing uptime.Select configurations of the x3650 M3 are part of the IBMExpressAdvantage™ Portfolio designed to meet the needs of midsized busi-nesses. Easy to manage, Express™ models and configurations vary bycountry.
Please Recycle
IBMSystem x3650 M3 at a glance
Form factor/height Rack/2U
Processor (max) Up to two 3.33 GHz six-core (3.46 GHz four-core) Intel® Xeon® 5500/5600 series processorswith QuickPath Interconnect technology
Number of processors(std/max) 1/2
Cache (max) Up to 12 MB L3
Memory (max) 192 GB DDR-3 RDIMMs1via 18 DIMM slots or 48 GB DDR-3 UDIMMs1via 12 DIMM slots
Expansion slots 4
Disk bays (total/hot swap) Up to 16 hot-swap SAS/SATA HDDs or SSDs
Maximum internal storage 8.0 TB of 2.5" hot-swap SAS/SATA or 800 GB hot-swap SSD
Network interface Integrated 2 ports, plus 2 ports optional Gigabit Ethernet
Power supply (std/max) 1/2; 675 W each
Hot-swap components Power supplies, fan modules, disks
RAID support 3 Gbps RAID -0, -1, -1E or 6 Gbps RAID -0, -1, -10, -5, -50 with 256 MB or 512 MB cache and additional option battery backup,model dependent
Systems management IBM IMM with Virtual Media Key for optionalremote presence enablement, Predictive FailureAnalysis, Diagnostic LEDs, light path diagnosticspanel, IBM Systems Director and IBM SystemsDirector Active Energy Manager™
Operating systems supported Microsoft® Windows Server® 2008 R2 and2008, Red Hat Enterprise Linux®, SUSE Linux Enterprise Server, VMware ESX and ESXi 4.0, Sun Solaris 10
Limited warranty 3-year customer replaceable unit and onsite limited warranty
For more information
U.S. ibm.com/systems/x/Canada ibm.com/systems/ca/en/servers/x/index.html

MEO Search And Rescue Application System's

2010-12-16T00:55:00.000-08:00

Three Types of SARSAT Systems
LEO –Low Earth Orbit

Time delay before satellite over beacon –up to 2 hours at equator
Planned Support to 2016

GEO –Geostationary Orbit

Detect only, no location unless beacon has internal GPS(Global Positioning System)
Planned Support to 2014

LEO SAR and GEO SAR Satellites

MEO –Mid-Earth Orbit

Transponders on US GPS Satellites, EU GALILEO Satellites and Russian GLONAS
Combines advantages of LEO and GEO
Immediate detection & immediate, accurate location

MID EARTH ORBIT

Subnetting Problem Patterns and Techniques work

2010-12-13T02:06:00.000-08:00

Subnetting Problem Patterns and Techniques work
by Romi Satria Wahono
At the time of teaching and comprehend the material in class networking subnetting or CCNA, I usually using the method as I wrote in two previous articles:
Understanding
1. Subnetting Concept
2. Count Subnetting

1. SubnetMask ASKED QUESTIONS BY THE TERMS OF THE NUMBER OF HOST OR SUBNET
Questions are asked Subnet what should be used to limit the number of hosts or subnets
determined in the matter. To answer this question we use the formula to calculate the number of hosts per subnet, ie 2y - 2, where y is the number of binary 0 in the last octet Subnet. And if determined is the number of subnets, we use the formula 2x (way after 2005) or 2x - 2 (means before 2005), where x is the number of binary 1 in the last octet Subnet.
Question: A company is planning to subnet its network for a maximum of 27 hosts. Which Subnet Would Provide the needed hosts and leave the fewest unused addresses in EACH subnet?
Answer: Because the requirement is 27 hosts, we just enter into the formula 2y - 2, where

the answer can not be less than (or equal to) 27. So 2y - 2> = 27, so the value of y right is 5 (30 hosts). Once again, because y is the number of binary 0 in the last octet

Subnet, so if we arrange subnetmasknya becomes 11111111.11111111.11111111.11100000
or if we desimalkan be 255,255,255,224. That is the answer
Problem: You have a Class B network ID and need about 450 IP addresses per subnet. What is the best mask for this network?
Answer: 2y - 2> = 450. The exact value of y is 9 (510 hosts). So subnetmasknya are:
11111111.11111111.11111110.00000000 or if didesimalkan be 255.255.254.0 (that is the answer!)

Question: Refer to the exhibit. The internetwork in the exhibit has been assigned the IP address 172.20.0.0. What would be the Appropriate subnet mask to maximize the number of networks available for future growth?
Answer: Find the number of hosts per subnet is greatest, make the referral because if we take the smallest existing probably needs a larger host not fulfilled. So for this matter 2y - 2> = 850. Y values The most appropriate is 10 (1022 host). So subnetmask is 11111111.11111111.11111100.00000000 or 255.255.252.0

How to Change Favo Icon on Blogger Update

2010-12-10T07:44:00.000-08:00

Many of you see when a website or blogg in box address / address box on the browser there are small images such as logos, that little logo called a Favicon, probably from the origin of the word favorite icon: D

Already many of which provide tutorials and step by step of changing the favicon could see, among others:) http://kelikendratno.blogspot.com, well to complete the following ways to change the default on blogspot Favicon

1. Make sure you've uploaded an image may be a jpeg or PNG, not necessarily the format icon (*. ico). Please upload to your favorite sites such as Flickr.com, photobucket.com, google account, and others. Do not forget to copy the link url of your uploaded images

2. Log into your account login blogger => Dashboard => Select Blog => Design => edit HTML
- Make sure you backup your blog template, if there is something you can restore back:)

3. Edit Link picture you want to make like the following Favicon

4. Put the code / edited link between the bracketed code ..... , Press Ctrl F to facilitate the location of the above tag quest

5. Click Preview to see the changes, if you are already Favicon has changed then press the Save template. Congratulations you've changed bloggers Favicon

Note: If you're having the time Preview favicon has changed but after save templates, favicon back into shape (blogger default)

Try searching the following code snippet and please delete

Good luck hopefully help ..

3x3 Rubik's Cube Solution: (STEP: O-P-P-O-O) Part 2

2010-12-10T06:13:00.000-08:00

STAGE 3: Solve UPPER Layer:

    STEP 1: orienting EDGE PIECES
                  -In this step we orient the edges to form bean + (cross)
                  -Because the form + (cross), then this step is often called CROSS STEP.

FURU'R'F '

FRUR'U'F '

Be Continue

3x3 Rubik's Cube Solution: (STEP: O-P-P-O-O) Part 1

2010-12-10T05:58:00.000-08:00

The method used here is the method layer by layer (layer after layer).

STAGE 1: Solve BOTTOM Layer (COMPLETE LAYER BELOW).
STAGE 2: Solve MIDDLE Layer (COMPLETE MIDDLE LAYER).
STAGE 3: Solve UPPER Layer (LAYER TO COMPLETE).

    STEP 1: (O) RIENTING PIECES EDGE (EDGE GRAIN ORIENT)
    STEP 2: (P) OSITIONING PIECES EDGE (EDGE GRAIN position)
    STEP 3: (P) OSITIONING CORNER PIECES (positioned GRAIN CORNER)
    STEP 4: (O) RIENTING CORNER PIECES (ORIENT GRAIN CORNER)
    STEP 5: (O) RIENTING CENTER PIECES (GRAIN ORIENT CENTER)
                            NB: STEP 5 is only used on the Rubik's Cube pictorial.

Discussion:

The names of beans at the Rubik's Cube:

EDGE PIECE


CORNER PIECE

CENTER PIECE

STAGE 1: Solve BOTTOM Layer
-Not discussed here, because we assume that you already can.

STAGE 2: Solve MIDDLE Layer


URU'R'U'F'UF

U'F'UFURU'R '

USB Modem Settings MOBI OPEN SUSE 11.3 GNOME

2010-12-09T05:24:00.000-08:00

USB Modem Settings MOBI OPEN SUSE 11.3 GNOME

Some time ago tried to install Open SUSE 11.3 on Compaq Presario CQ45, apparently all the drivers are well known. For internet connection is very easy, for wireless connection directly detected. Oh yes for usb modem settings, I use a USB Modem from MOBI setting easy enough to use the GNOME desktop does not need to edit the wvdial again.

Here's a screenshot of Step By Step, if unclear please search on Google or Open SUSE Community Indonesian

1 Display the GNOME desktop

OPEN SUSE 11.3 Desktop

2. Point your mouse to the right select Edit Connection Corner

Edit Connection

3. Select the tab Mobile Broadband

Mobile Broadband

4. Enter Number, User name, Password (adjust with your registration account), for the connection name please use as you wish, then click Apply

MOBI broadband edit settings

5. Select the Broadband technology is used, because using MOBI Fren, select the second option uses the My Providers CDMA-based technology (ie 1xRTT, EVDO), and select OK, see picture below

Select Mobile Broadband Providers

6. The connection has been active, see the status in the left corner of the taskbar

Mobile Broadband active MOBI

7. Please Open Browser favorite, you should already be connected to the Internet

BootMgr is compressed Win7

2010-12-09T04:21:00.001-08:00

Starting from the case, no detection of Compaq Presario CQ20 USB port 401 TU, OS Win 7, whereas the default Windows Vista, try looking for updated drivers on HP website, found driver for Win 7 401 CQ20 not support TU. Try to down grade to XP as well as drivers not compatible, finally returned to Vista. New problems arise because the Original Vista CD do not exist, eventually use the artificial Mangga Dua, Installation smoothly, well after the run key gen: ((crack, restart it turns out the problem arises "" BootMgr is compressed " thus definitely suspect a problem in the Boot loader (rich in Linux), but already can not use the Mini PE also, the drive letter C (the contents of Windows) to be Drive D (Data). To Link Driver catch yah later .. too busy do something else:)

In short if you have a "BootMgr is compressed" Do uncheck the C: Properties

Step by step instructions to follow the steps below, or go directly the original source link

Guys, try to be very simple Pls giving assistance, not every one understands those rather very fast answers you give.

SOLUTION TO THE "BootMgr is compressed press CTRL + ALT + DEL" problem

=====================================

1. INSERT your VISTA DVD in your laptop / PC

2. Power ON your laptop / PC

3. BOOT from VISTA DVD -> make sure your laptop / PC

is set to boot from DVD / CD-ROM or Pls u first see the

That message says "PRESS ANY KEY TO BOOT FROM

DVD / CD "just hit any key and the next steps will of some

automatic

4. Click "INSTALL"

5. Choose "LANGUAGE" of your choice

6. Click "Repair"

7. Before you click "NEXT" click on "UPLOAD DRIVERS"

8. in the "OPEN" dialogue box appears on the left That side

click "MY COMPUTER" then find your "LOCAL DRIVE C:"

and "RIGHT CLICK IT" then select "PROPERTIES"

9. there are two "CHECK BOXES" on the "C: Properties

dialogue box ", so" uncheck "the one That says

"Compressed" if its checked

10. hit the "APPLY" button, wait as this takes a less than a

minutes or so depending on your computers

PROCESSOR / RAM, please be patient!

11. U cans now hit the "OK" button, and voila, go have fun

Sequence structure Algorithm Programming

2010-12-09T04:09:00.000-08:00

Runs / SEQUENCE

Is an activity or action in a row and interconnected, where an act done after the previous action is completed.

The form of this activity are:

- Activities carried out sequentially

- No repetitive activity

- In accordance with the program structure

- Done from beginning to end

Public Forms

'Variable 1: Type data1

'Variabe2 1: Type data2

'Input value1

'Input value2

'Process Ekspresi1

'Process Ekspresi2

'Process Ekspresi3

'Done

Different action sequences in the Sequence / runs can produce different output.

Private Sub Command1_Click ()

'EXAMPLE 1 SEQUENCE

Dim A, B As Integer

A = InputBox ("Enter A: '")

B = A

A = 2 * A

Label1.Caption = B

Print "result:"; B

End Sub

Example Sequence 2

Private Sub GayaHKNewtonIII_Click ()

Dim G, M, a, M As Single

Print "Program To Count Style On Newton's Law III"

M = InputBox ("Value Objects Mass (Kg):" "," Variable M ")

a = InputBox ("Value Acceleration (m/s2):" "," variable a ")

F = InputBox ("Value of Friction (Newton ):'"," Variable F ")

G = M * a * F

Print "Style Motion required ="; G; "Newton"

End Sub

Making Program

Stage in making the program there are 3 main parts: Input-Process-Output

Steps to Create a simple program:

1. Choose variable names

2. Determine the formula used

3. Write a complete program. The first few lines are used to define the data and reading the input data, the following lines declare

a variable output as a result of the operation process input variables

Sequence Examples

1. Program To Change Become Celsius Fahrenheit

Variable: C, F, R Integer

Input F

C = (F-32) * 5 / 9

R = (F-32) * 4 / 9

2. Program change into meters I Kilometers

KM Process Input M = KM * 1000

3. Program Calculating Area and Circumference Circle

Phi = 3:14 Variables Constants: r, L, K Integer

L = Phi * r * r K = Phi * 2 * r

4. Program change Hours to Minutes M = J * 60

5. Calculating Potential Energy Things Ep (Joule) = M * G * H

Exercise Problems

1. Create a program Calculating Force press on Newton's Second Law

2. Create a program object Counting Hollywood motion, Newton's Law III

3. Create a program to calculate Area and around the Triangle that are known side

4. Dim X, Y as a Boolean

Dim A, B as Integer

X = True: Y = False A = 23 B = 7

a. (A mod B) <= 4 imp Y

b. (X XOR Y) imp (X and Y)

5. Create a Program Change value in seconds to Hours, Minutes, Seconds

6. Create a program to change fractions into Persent from Input 2 Integer?

Hint question:

1. P = F / a P = Force Press on Objects (Joule) F = force acting on the field (Newton) a = acceleration (m/s2)

2. G = M * a * F

3. K = A + B + C

S = ½ K

L = √ S (S-A) (S-B) (S-C)

Answer:

Private Sub DetikTOJamMenitDetik_Click ()

Dim Seconds, Minutes, Hours, X, Value As Single

Value = InputBox ("Second Value:" ")

Hours = Int (Value / 3600) 'Looking Hours

Label1.Caption = Hours

X = Value Mod 3600

Label2.Caption = X

Minutes = Int (X / 60)

Label3.Caption = Minute

Seconds = X - (60 * Minutes)

Label4.Caption = Seconds

Print Value: "SECONDS"

Print Jam; "JAM"

Print Minutes; "MIN"

Print Seconds; "SECONDS"

End Sub

Private Sub GayaHKNewtonIII_Click ()

Dim G, M, a, M As Single

Print "Program To Count Style On Newton's Law III"

M = InputBox ("Value Objects Mass (Kg):" "," Variable M ")

a = InputBox ("Value Acceleration (m/s2):" "," variable a ")

F = InputBox ("Value of Friction (Newton ):'"," Variable F ")

G = M * a - F

Print "Style Motion required ="; G; "Newton"

End Sub

Example:

? 3500 mod 3600

3500

? 5 mod 10

? 100 Mod 60

? 60 mod 60

? 60 mod 3600

? 70 mod 3600

Clasless Inter-Domain Routing (CIDR)

2010-12-09T03:29:00.001-08:00

Clasless Inter-Domain Routing (CIDR)

Another term that you need to understand so well is Classless Inter-Domain Routing (CIDR). CIDR is basically the method used by ISPs (Internet Service Providers) to allocate a number of addresses in a company, home / office customers. ISP providing the address in block size (block size) -. certain

When you receive sebuahblok addresses from an ISP, what you received looks like: 192.168.10.32/28. What is from these numbers is to explain your subnet mask. Notation slash or slash notation (/) means how many bits of value 1 (in the example above is / 28, meaning there are 28-bit value 1).

We know that the maximum value after the slash is / 32 because a byte is 8 bits and there are 4 bytes in an IP address: (4 x 8 = 32). But you should bear in mind that the largest subnet mask available (regardless of class address) is just / 30, because you have to keep at least two bits as bits of the Host.

Take the example of a Class A subnet mask, which is 255.0.0.0. This means that the first byte of the subnet mask is all 1 or 11,111,111. If you look at the notation side, you need to count all the bits 1 to get his mask. 255.0.0.0 Mask with / 8 because it has 8 bits of value 1-or 8 bits are on.

Default mask is a class B is 255.255.0.0, which is equal to / 16 because its 16-bit is 1, namely: 11111111.11111111.00000000.00000000.

The following table contains a list of all the available subnet mask and CIDR slash notation which is equivalent to the subnet mask.