Bathroom Ideas

Body dryers in bathroom

2011-10-31T13:39:00.000-07:00

Body dryers are also ideal for people with disabilities that use a shower wheelchair, or rely on a caregiver to help them dry off after a shower. Some people are attracted to a shower body dryer just because it's fun to use. what is a body dryer?

A body dryer is a device used for drying the whole body without a towel after a shower or bath. A body dryer is very similar to a hand dryer with the only difference being in size. As compared to a hand dryer, a body dryer is much bigger in size and helps to dry the whole body within just three minutes of operation. There are quite a few benefits of using body dryers instead of towels to dry your body after a shower.

1. Body dryers help you to dry your body easily after a shower.
2. Body dryers dry your body in a more gentle and relaxing way as compared to towels.
3. When it comes to hygiene, body dryers are a much better option than towels.
4. Body dryers are faster and provide better result than any type of bathroom heater.
5. Body dryers are particularly helpful in drying kids and pets after a bath.
6. If you have difficulty drying yourself with a towel because of mobility issues or skin irritations then a body dryer can provide a more pleasant experience.
7. With body dryers you get less laundry work to handle.

Before installing a body dryer in your bathroom, make sure that your home has good quality wiring or electrical supplies. Electric floor heat, towel warmers and other options can turn your bathroom into a tranquil, comfy retreat. One solution to this is to install electric floor heat. Basically, they offer additional radiant heat for your bathroom as well as warming up (and drying) your towels. You can install a full body dryer, a full body dryer. Think public bathroom hand dryer, and increase the scale! A steam generator converts your shower into a steam bath, with moist, rich heat to luxuriate in.

Luxurious Bathroom

2011-09-02T13:22:00.000-07:00

A bathroom can be one of the most luxurious rooms of any house. The important elements of bathroom decor revolve around the bathroom sinks, mirrors, cabinets and fixtures. These are the elements of the bathroom that separate it from other rooms of the house. The cabinets in the bathroom are the perfect place to plan on storage and organization for your bathroom. Any bathroom should be fitted with an appropriate mirror or combination of mirrors. The mirrors serve multiple purposes in a well designed bathroom. Finally, the mirror reflects light in the room. Placement and size of the mirror in conjunction with the bathroon sinks, mirrors, cabinets and fixtures may be critical.

The sink and sink fixtures are the final touch that make a bathroom stand out. Not everyone is lucky enough to have bathroom windows. Since every window, and especially those in the bathroom, should be covered to protect privacy and ensure modesty, you may not be sure how to best cover your bathroom windows. There are many ways to accent or de-emphasize your bathroom windows. Café-style curtains are popular over a traditional tension-pull blind or mini-blind setup.

Whichever curtain styles you select, coordinate the design and color shades with other bathroom accessories, like floor rugs, towels and washcloths, and wall colors or wallpaper patterns. Keep your bathroom windows washed so that when the curtains are open, users can enjoy the view, if possible.

The tubs, vanities, and the general layout of the bathroom continue to accommodate the manufacture, the plumbing conventions, and the average person who is installing a bathroom. Designating a bathrooms role can be a fairly complex one. There should be one full bathroom in each accessible floor of the home. In a larger house, there should be a bathroom in each section of the home. Unless of course the home is a small one, plan on having a minimum of two bathrooms. The sink is another feature of a bathroom that can be altered to handle the elderly.

Shower Installation

2011-07-11T11:06:00.000-07:00

How to install shower pan liners is the critical skill for building a trouble-free shower. You do have several options for installing a shower pan. If you want a ceramic shower, the traditional way is still the most common way to build a shower pan. The drain is a special drain with two layers of drain holes. The sheet is run up the shower walls and glued to the shower drain base. The tile is installed over this layer and grouted in place.

Materials to Shower Installation

- Vinyl shower liner-Cut to fit the floor area and extend 10-12 inches up the wall on all sides

- New Shower Drain Assembly

- Roofing tacks 1 1/4"- To secure liner to walls

- Shower liner adhesive

- Vinyl shower liner-Cut to fit the floor area and extend 10-12 inches up the wall on all sides

- New Shower Drain Assembly Treated 2x8 lumber-to be cut for blocking behind liner

- Roofing tacks 1 1/4"- To secure liner to walls Shower liner adhesive

Installation Steps

- If working on an existing shower, breakout and remove old floor, mud bed, liner and remove existing tile up at least 12 inches on all walls.

- Install new shower drain assembly.

- Install the adjustable drain piece to the desired finish floor height

- Mix portland and sand for finished mud bed.

- Installing your shower enclosure is very easy. It all starts with the shower tray. Remember, the shower tray should be evenly placed on the floor because this is the foundation of your shower enclosure, so make sure that you installed your shower tray properly.

- Fiberglass or Acrylic Liners, Your local building supply store stocks shower liners ready to install. Ceramic tile cannot be installed over standard fiberglass or acrylic shower pans.

- Tile Ready Shower Pans, If you want a traditional looking ceramic tile shower without the construction of the traditional shower pan, choose one of the tile ready shower systems. Most include wall and ceiling component liners as well as floor liners. Most tile ready shower pans include a vinyl pan with a built in drain.

Bathroom Tile

2011-05-26T13:03:00.000-07:00

If you have a small sized bathroom, you will not want to overwhelm it with a large tile design. Intricate designs work best with small bathrooms, and vice versa. As a rule of thumb, keep your bathroom tile shower design proportionate with the overall size of the bathroom. Here are some of the most popular bathroom tile shower designs: Glass As of late, glass bathroom tile shower designs are becoming more and more popular. Glass tiled showers also attract the eco-activists because glass tiles are often composed of recycled glass. Aside from granite, glass tiles are by far the most expensive bathroom tile shower design of the bunch.

Subway tiles may very well fall into the retro category, however subway tiles have remained one of the most popular shower design options for over half a decade. If applied correctly, shower tiles are the most seamless and clean-lines options available. Want another reason to choose subway tiles for your shower re-tiling? They are by far the most cost effective shower tiling solution. Granite Interior designers love to use granite tiles as kitchen and bathroom counters, kitchen and bathroom floors, kitchen backdrops and of course, as shower tiles. The nation has spoken; the most luxurious option for bathroom tiles is granite. Using granite is the most expensive shower tiling solution. There is no better place in the home for using ceramic tile than the bathroom. A typical bathroom tile design will include the use of ceramic tiles for a finished surface on walls and floors. Ceramic tile design in the bathroom is nearly limitless in possibilities. Walls and surfaces with glazed tiles are often installed in a symmetrical pattern because of the straight edges.

Mosaic tile is available as single or multicolored glass, unglazed porcelain, and even stainless steel. In addition to glass, hand decorated tiles also provide that unique creative design. Tile is relatively maintenance free and it is easy to clean, especially when glazed. Installing ceramic tile in your bathroom doesn't have to be a tough job. The materials you will need are a carpenter's level, hammer, tile cutter, tile nipper, grooved trowel, rubber gloves, plastic tile spacers, chalk line, rubber squeegee, popsicle sticks, tile sponge, tile mastic, grout, tile sealant, and caulk. Then remove the tile and cut the end pieces to fit. For the fixtures, use tile nippers to cut holes from the adjacent tiles. Save the cap tiles until last. Remove the tile spacers and spread the grout using rubber gloves. Allow it to dry overnight, then use a tile sponge to remove the thin film of grout that has dried on the surface of the tiles. Apply ceramic tile sealant according to the label.

Bathroom

2011-04-30T13:41:00.000-07:00

Hiring an expert to repair bathroom tile can be expensive and time consuming. Repairing or replacing the tile in bathrooms may seem complex and unattainable but even the least experienced home owner can repair the tiles in any size bathroom with the right tools, instructions and a little elbow grease.

If the damage is minimal, painting the cracks in the tile with matching paint will be simpler than replacing the tiles. Purchasing Tiles And Tools

If the entire bathroom floor is being replaced, choose a grout to compliment the new tile. Replacing The Damaged Tiles

Once it has been removed; use the grout remover and putty knife to remove the old grout and adhesive. Continue in this same manner until all of the damaged tiles are replaced.

Nowadays, people spend ample time and money towards the decoration of their bathroom tiles. You can utilize the given below techniques to repair the bathroom tiles.

-Firstly, start by removing the broken tiles. Remove the excess grout near the tiles with help of a grout saw. Now, remove the tiles and remaining grout with help of a putty knife.

- Now, take a putty knife and chisel to even out the tile adhesive. You should consult a knowledgeable tile dealer before purchasing the adhesive.

- Then, fix the new tile on the surface from where the tile was removed.

- After 24 hours, prepare a grout mixture and fill the joints between the bathroom tiles with help of the grout. Don't forget to clean the excess grout from the tile surface.

Bathtub Installation

2011-04-30T13:40:00.000-07:00

When installing a tub to replace an existing unit, the old bath tub needs to be disconnected and removed. Using as much assistance as is necessary, place the new bath tub into place and use shims to level it. After the tub is leveled and is adequately supported, the next focus is to connect the necessary plumbing.

The steps needed to connect the plumbing will depend on what is already present from the previous tub. Although the process of bathtub installation can be complicated, once you learn how to install a bath tub, you can save a great deal of money by completing the task yourself. If the old tub is readily accessible, the project can move speedily; if you have to open a wall to remove the old tub and position the new bathtub, the task is much harder. This article will help you install a new bathtub in your bathroom if you have already bought a new tub and don't need to change the arrangement of your previous water supply pipes.

New Bathtub, Hammer, Pipe Wrenches, Prybar, Safety Glasses, Level, Pliers, Adjustable Wrench, Putty Knife, Screwdriver, Cold Chisel, Tape Measure, Pipe Caps

Firstly, the supporting frame supplied with the bath should be fitted (if required) according to the manufacturer's instructions.

Next, fit the taps or mixer to the bathtub. When fitting the tap block, it is important to make sure that if the tap comes with a plastic washer, it is fitted between the bath and the taps. On a plastic bath, it is also sensible to fit a supporting plate under the taps unit to prevent strain on the bathtub.

Fit the flexible tap connectors to the bottom of the two taps using 2 nuts and olives (sometimes supplied with the tub).

Fit the plug-hole outlet by smearing mastic filler round the sink outlet hole, and then pass the outlet through the hole in the bath. Next, fit the end of the flexible overflow pipe to the overflow outlet. Use a basin wrench (crowsfoot spanner) or a tap tool to undo the nut that connects the supply pipes to the taps. Once the supply pipes have been removed, use the same tool to loosen the nut that holds the taps onto the bath/basin. Before moving on to fit the new taps, compare the pipe connections on the old taps to the new taps. If the old taps are longer than the new taps, then a shank adapter is required for the new taps to fit.

To install taps, fit the bottom of the furthest flexible tap connector to the appropriate supply pipe by making a compression join; then do the same for the other tap.

Fill the bathtub and also check the overflow outlet and the normal outlet for leaks.

If you need to fit a monobloc, then you will require reducing couplers, which connects the 10mm pipe of the monobloc to the standard 15mm supply pipe.

Next, position the tap in the mounting hole in the bath/basin ensuring that the washers are in place between the tap and the sink. Once the tap is securely in place, the supply pipes can be connected to the tails of the taps. The taps can either be connected by using corrugated copper piping or with normal tap connectors. The supply pipes can later be connected to the other end. Remember to always fill the bathtub with water before sealing, to allow for the movement experienced when the tub is in use.

Bathtub

2011-04-30T13:35:00.000-07:00

If you have a problem with your bathtub filling up with water when you take a shower, or maybe the water drains out when you're taking a bath, you may need to repair your bathtub drain. A few simple tools and a little bit of knowledge is all you need to repair your bathtub drain.

When you look at your bathtub drain, is there a level that will move the drain plug up and down? This unlevered drain is the easiest type to repair, so we will discuss that one first. To remove the unlevered drain, simply lift the stopper up and turn it in a clockwise motion to release it. Now, place the new drain into the tub.

If you have a levered drain, it will take a bit more work, but is still a fairly easy fix. After you have removed everything, you will need to repeat the cleaning process again before you replace the drain and lever. Scrub the lever assembly clean with a wire brush to help remove any build-up. Repairs in your house are always likely going to cost quite a bit of money.There are many ways to cut down on these repair costs by doing some house repairs yourself.One repair which you should consider doing yourself is a bathtub repair.

If the repair is minimal apply some of the DIY tips below. For the repair of impact damage and flaking on bathtubs with enamel, ceramic (porcelain) and acrylic surfaces.For this job you would need a repair paste suitable for porcelain, enamel and acrylic.a non yellowing repair spray(make sure about the non yellowing factor with the salesperson at your hardware store),some special sandpaper with minimal rub off on ceramic and enamelled surfaces and a wet/dry sandpaper for acrylic and fiberglass surfaces.

With minor defects use a touch up stick.

Pool

2011-04-30T13:33:00.000-07:00

We all want a gorgeous pool, gorgeous from top to bottom that is. Routine cleaning comes with routine repair to achieve this. But how do you know when to repair a pool? A lot of people pay experts to execute their pool repair but it is 100% doable.

1. Pool plaster

2. Acrylic resin

3. Water

4. Plastic Prowl/s

5. Rubber/plastic gloves

6. A shot glass

7. Matching paint

It is impossible to effectively repair your pool if it still has water in it.

Next, acid wash your pool. Just be reminded to wear rubber gloves, a gas mask and safety goggles as you acid wash your pool.

Let your pool completely dry.

We are now ready to repair your pool. Look for cracks and holes on the surface and mark them. 8. Apply the mixture evenly and then let it dry.

Purchase a paint color that matches with the color of your walls, deck and steps. Apply paint on the holes and cracks that you have covered. With just a few simple steps, you can save money on your pool repair.

Repair Plumbing

2011-04-30T13:29:00.000-07:00

The slew of guides and manuals that deal with every conceivable plumbing problem in and around your house are like a Godsend for harried homeowners. The simple, step-by-step instructions, along with detailed illustrations, guide you through these mundane yet monstrous problems.

Whether tips on understanding your home's plumbing system or the local plumbing codes, list of tools and safety equipment required before undertaking any project or even preparing for all kinds of repairs, you are hard-wired for success.

So who's kvetching about faucet repairs, leaky tanks and frozen pipes? Plumbing professionals are crying foul.

If you do this inspection well, you can ensure that minor repairs do not turn into major expenses. Sometimes, the plumbing problem may require less frequent monitoring, and sometimes, it may require more. If you feel qualified that you can inspect the plumbing problems and perform a fix-it-yourself plumbing leak, you can certainly go ahead.

A professional plumber will not only spot any problems, but he will also advice on repairs and costs right on the spot. If you want a thorough evaluation, you can hire a home inspector. Take time to repair leaky faucets and caulk bathroom fixtures.

Plumbing Installation

2011-04-30T13:22:00.000-07:00

If you are altering your existing drainage, or installing a new drainage system you must always inform the local Building Control Department at your local council offices. Waste from these sources must always go to your foul water drain system.

Surface water is basically rainwater. This can discharged into a soakaway, watercourse, surface water sewer or, particularly in older properties, into the foul water drainage system. In a combined system, the rainwater pipes are discharged into the foul water drains via gully traps which stop foul air escaping from the drains.

However, modern systems are designed to keep the foul water and the surface water apart. It is extremely important to ensure that you do not connect foul water to a surface water drainage system. If you are unsure about the drainage system around your house get advice from the Building Control Department before you start any work.

You must avoid making your pipe runs too steep. A soil pipe is normally laid to a fall of 1:40. You can calculate the fall of a drain over a distance using a surveyor's site level. If you are laying a drain run parallel to the building, you must ensure that any foundations are not undermined.

Do not dig the trench too long before laying the pipe when installing a new drainage system. If in doubt - add support to the trench to prevent it from collapsing. Keep the trench as narrow as possible, but allow room to work in the trench - say the width of the pipe plus 150mm (6") on each side. Never use bricks and/or other hard materials to support the pipe in the trench. Once the laid pipes have been inspected, granular material should be evenly backfilled and compacted to a depth of at least 100mm above the pipe. Above the granular backfill material, the original dug material can be used to completely backfill the trench. You will need to protect any part of the drain system that is less than 600mm below a garden. A 50mm layer of lean concrete laid 100mm above the pipe will be adequate to do this. Where a junction between two drains does not have a manhole, access should be sited on the branch drain within 12 metres of the junction.