Best-Tweaks

What Are Proxy Sites and How it is Used in the Internet?

noreply@blogger.com (Ashish) — Sat, 05 Jun 2010 20:01:00 +0000

The word “proxy sites” or “proxy server” sounds quite unfamiliar right? Do you have any idea about it? Well, you heard it but you do not have the proper knowledge about it. So here my article will help you to understand about what proxy sites or proxy servers are all about. It is basically a web page that allows users to surf internet with buffer. These are basically sites or servers. It helps to hide your IP address and provide you information. You can download a page or file very quickly with a proxy server. If you want a good speed while you are downloading any music, movies or any other files then proxy sites are the great option for you. Your system is also safe because proxy server is using another IP.

Now you can ask where to find these. It is very simple procedure. Just search on Google search engine and there you can find lots of proxy sites and servers. Proxy sites always provide the browse server so that will help you remain anonymous online while you are downloading something. Actually there are many sites where you can find some sort of internet limitations. Some websites are banned by them or forbid some types of contents and proxy sites or servers are the best way to bypass all these problems. So a proxy site gives you the comforts, securities and guaranteed privacy. You can just type the web address where you want to go in the proxy bar and it will take you there from its own IP address. It is really a great opportunity to take the benefits of a web proxy.

But there are some problems with anonymous proxies. There are many proxy servers which are slow. If you use Google for searching of proxy then you can have a huge list of proxy servers but most of these are slow and does not effectively. An elite proxy can give you the better result. Elite proxies are different than other free of costs proxies because they are paid items and you have own product right on it. No one else but you can use your own proxy server. Here you can change your IP or hide it and no one can understand anything about it. So it is better to go for the elite proxies rather than going for the anonymous proxy sites.

Free proxy is not good because it makes the way easier for hackers. So you should be more careful when you are putting your identity and other information in a free proxy servers.

So if you are sure that you would use proxy then go for the elite proxy and take the full benefits of it.

I wish you good luck and hope this article has given you some basic knowledge of Proxy, Proxy Sites and Proxy Servers

How Long Has Your System Been Running?

noreply@blogger.com (Ashish) — Fri, 25 Sep 2009 05:03:00 +0000

How Long Has Your System Been Running?

Here's how you verify system uptime:

Click Start | Run and type cmd to open a command prompt.
At the prompt, type systeminfo

Scroll down the list of information to the line that says System Up Time.

This will tell you in days, hours, minutes and seconds how long the system has been up.

Note that this command only works in XP Pro, not in XP Home. You can, however, type net statistics workstation at the prompt in Home. The first line will tell you the day and time that the system came online.Enjoy!!!

Lock/Hide Your Folder in Windows XP without Any Software

noreply@blogger.com (Ashish) — Tue, 22 Sep 2009 03:49:00 +0000

Sometimes you have some data you want to save from your friends, you dont want to use any Folder lock software. Then in that case what will you do?
Well here is a simple solution. Suppose you have a folder “TEST”, and you want to lock it
Follow the instructions below.:
1. First try it out on an empty folder in case something goes wrong. So first create a folder in drive C , for example name it as “secret-files” without the quotes.
2. Next, open your command prompt ( Start > Run > type “cmd” in the Run box without the quotes )
3. Within the command prompt, type “attrib +s +h C:\secret-files” ( without the quotes )

4. This command will make your folder completely invisible and it can not be seen even in hidden files and folders. Try search for the folder, I am sure it returns no result. It’s cool right?
5. To make the folder visible again type “attrib -s -h C:\secret-files”
6. And of course you can lock other folder too, by changing the location C:\secret-files to address of your folder.

Insert your name in Taskbar

noreply@blogger.com (Ashish) — Tue, 22 Sep 2009 03:42:00 +0000

Hey its a very cool trick u can amaze u r friends and relatives by inserting your name on the bottom right task-bar. Follow the instructions bellow:

Open Control Panel -> Regional and Language Options -> Customize ->Time
here you can see A.M. and P.M. change it with u r name. Thats it.

Stop IE7 Prompt To Save Passwords

noreply@blogger.com (Unknown) — Sat, 12 Sep 2009 07:45:00 +0000

Windows Registry Editor Version 5.00

;Stop IE7 Prompt To Save Password
;
;From the Tools menu, select Internet Options.
;Click the Content tab.
;In the "AutoComplete..." section, click the Settings button.
;To prevent your password from being saved,
;deselect the "User names and passwords on forms" checkbox.
;
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"FormSuggest Passwords"="no"

If you want undo, follow these steps

Windows Registry Editor Version 5.00

;UNDO Stop IE7 Prompt To Save Password
;
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main]
"FormSuggest Passwords"="yes"

How to Change Name and Company Info after installing windows

noreply@blogger.com (Unknown) — Mon, 07 Sep 2009 21:02:00 +0000

Step 1: Start > Run > Regedit

Step 2: Find following Registry Key-

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion

Step 3: Double-Click RegisteredOrganization.

STEP 4: Under "Value data", type the name that you want...then click OK

STEP 5: To change the name of the registered owner, do the following:

STEP 6: Double-click RegisteredOwner

STEP 7: Under "Value data", type the name that you want...then click OK

How to access blocked sites at school

noreply@blogger.com (Unknown) — Thu, 27 Aug 2009 19:58:00 +0000

1. Start>Run and type in cmd, if you don't have run on your start menu, read another school hacking tutorial to tell you how to access it.

2. Once your command prompt box opens, type "ping www.yoururlhere.com" (of course without the quotes.)

3.Press enter and you should see some numbers that looks like an IP address pop up, copy those numbers.

4. Open up your school internet browser, and type in those numbers that you copied in the command prompt. Now you can access your website!

AdesDesign - Color Picker

noreply@blogger.com (Unknown) — Fri, 31 Jul 2009 20:30:00 +0000

Normally when you want to use a color on the web you have to take a screen shot, then open it with PhotoShop, and then use the color picker tool. This is just a time waster when you can buy the Color Picker software for just $9.99.

AdesClrPicker is very easy to use and a must have for Web Designers, and Web Developers. With a single click of the mouse you can capture any color on your screen then output this color in HTML, RGB, C++, VB and Delphi color codes. When you are working on a project, you have to be able to refer to this color code often, and this tool allows you to have it, right at your fingertips, by capturing the last 10 colors that you used.

And for an added bonus, Ades from AdesDesign has a blog located at AdesBlog.com. He’s got great articles on web products and new technologies.

Lock your machine on Mouse Click

noreply@blogger.com (Unknown) — Thu, 16 Jul 2009 08:27:00 +0000

Feel hard to press CTRL+ALT+DEL to lock your machine ?????? Try this and create the icon to lock the machine.

1. Right click an empty spot on the desktop, point to New and click Shortcut.

2. In the Create Shortcut dialog box, type the following in the 'Type the location' of the item text box:

"rundll32 user32.dll,LockWorkStation" remove quotes while typing.

3. Click Next.

4. In "Type a name for this shortcut", type "" (any name as u wish) and Click Finish

5. Create a shortcut in your shortcut bar & use it

How To Speed Up My Torrent Downloads

noreply@blogger.com (Unknown) — Sun, 10 May 2009 07:17:00 +0000

If you are a Bit Torrent downloader, you know what slow download speeds are like…frustrating and annoying, to say the least. Instead of getting your music or movie within a couple of hours, your software predicts it will take 2 to 4 days.

Now, while many of the speed factors involved are out of your control, there is at least one thing you can do at your receiving end to improve this speed. It is called “Port Forwarding”, or “opening your specific TCP ports”. This is how it works.

1) That blue or green network cable coming out of your computer/modem/router is actually a busy highway comprised of 65,536 tiny electronic lanes (yes, over sixty-five thousand little lanes for your electrons). Each lane is called a “port”, and each port is designed to allow only specific types of information through.

Many ports are assigned in a semi-standardized way. Here are some example port assignments:

- HTML pages: port 80
- FTP file transferring: port 21
- World of Warcraft: port 3724
- POP3 email: port 110
- MSN Messenger: port 6901 and ports 6891-6900
- Everquest: port 1024
- Bit Torrents: port 6881

2) Bit torrents, by default, first look for port 6881 to enter/exit your computer. If port 6881 is closed for whatever reason, torrents then go to port 6882, then 6883, and so on, until it eventually tries port 6999 before giving up.

3) Every ISP, and every home router, can optionally block any of these ports with the intention of preventing hackers and controlling the network.

4) If you tell your own personal router and firewall at home to open (aka “forward”) port 6881 and port 6882, then your bit torrents will find their way into your computer that much faster. Sometimes up to 5x faster.

Yes, opening ports does increase the possibility of getting hacked by unwanted bad guys, but there are means to reduce that threat while still getting fast torrent download speeds.

Boot Your PC in STYLE

noreply@blogger.com (Unknown) — Tue, 24 Mar 2009 18:47:00 +0000

Note : I recommend making a copy of you "Boot.ini" first, just in case you do something wrong and your window is not booting, restart and when your pc is in post(the black screen) press F8 and boot in safe mode, and replace the "Boot.ini" with your backup of "Boot.ini" and it should get back to its former state.

All of us are accustomed to seeing the Windows XP logo at system startup
but how about getting a custom message at first before the logo appears?

Heres how to do it. Its easy and simple. Please don't mess it up until n unless you're DUMB enough.

Click start,then run.

Type c:\boot.ini

Erase whatever is there and copy and paste this

[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Write your message"/fastdetect
C:\="write your message"

Write whatever you want in between the quotes this will display for 5 seconds before windows starts

*if you have installed windows in any partition other than C: replace the number after the last brackets of

multi(0)disk(0)rdisk(0)partition(1)

Use
1 for c:\
2 for d:\ and so on

If you want to create more lines just write

d:\="......"
e:\="....."

After editing the file "Boot.ini" save it and restart the system to see how it goes.

Sample:

[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="This PC will blow in"/fastdetect
C:\="10 seconds"
D:\="Shut it down"
E:\="Or run for your LIFE"

Try it and next time when friends comes to see your PC I bet they will be astonished.

Get Vista Style Drive Icons in Windows XP

noreply@blogger.com (Unknown) — Sat, 28 Feb 2009 07:20:00 +0000

One of the nice little features in Windows Vista that you don't think about is the graph of drive space for your drive icons, so you can visually see at a glance how much space is used. There's no reason to upgrade for this feature, especially since some programmers created a small utility for XP that gives you the same functionality.

You'll notice the new icon looks very similar to the ones in Vista, but the more interesting addition is the new bar under the icon that gives you a tiny graph of the current drive space.

The graph will show up on most of the icon sizes other than the details view.

When your drive is running low on space the graph will turn red to indicate that you should probably stop downloading so much.

You can see in task manager that it really doesn't use all that much memory.

Download Drvicon from Sourceforge.net
http://drvicon.sourceforge.net/

Increase your browsing speeds

noreply@blogger.com (Unknown) — Tue, 20 Jan 2009 21:24:00 +0000

You really don’t need to tweak your browser in case you are using Firefox because it is a browser which has been specially designed for optimized and fast browsing but if you can make it even a little more fast that would certainly be a treat for you. Likewise there is a trick to make Internet Explorer 6 fast too. Browsers are designed to work with fast connections but with this trick even dial-up users can experience fast and smooth browsing.
Optimize Firefox and IE Browsing Speed
I shall be teaching you two tricks which work separately on Firefox and Internet Explorer. It doesn’t require you to be some expert rather all you have to do is change some registry values and you are done. I have also included a video tutorial for those who want to see it step by step visually. This is perhaps one of the oldest tricks to optimize Firefox and IE but it still works great.
Trick to Increase Firefox Speed
1. Open firefox and in the address bar write about:config and press enter
2. Double click network.http.pipelining and set it to True
3. Double click network.http.pipelining.maxrequests and set value to 10 from 4
4. Right click and create a new string nglayout.initialpaint. delay and set its value to 0
You are done. Enjoy lightning fast Firefox browsing and now for IE.
Trick to Increase Internet Explorer Speed
1. Go to Start –> Run and type regedit
2. Select HKEY_CURRENT_USER –> Software –> Microsoft –> Windows –> Current Version –> Internet Settings
3. Increase the values (DECIMAL) from default to a higher value e.g. 10

Cellphone Tips and Tricks

noreply@blogger.com (Unknown) — Sat, 10 Nov 2007 13:30:00 +0000

NOKIA 5110/5120/5130/5190 3110/3330 6110/6120/6130/6150/6190
Ericson T65/T20/T28/R310/
Siemens C25
Dancall
Alcatel
Samsung SGH600/2100DB
Philips
Panasonic gd90/gd93/GD70
ACER V750
Genie DB NEC db2000 Trium Geo/Geo @ - Astral - Cosmo -Aria
Telit GM 810
Sagem MC959/940
Sagem MC920
Sony CMD Z5/J5
Motorola V3688

Nokia

NOKIA 5110/5120/5130/5190

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4

NOKIA 6110/6120/6130/6150/6190

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330

*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370#
Half Rate Codec activation. It will automatically restart
#4370#

Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code

To check the ISDN number on your Nokia use this code *#92772689#
FOR NOKIA MODELS THAT WE ARE NOT REFERRING TO, TRY ONE OF THE PREVIOUS CODES

Ericsson
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
MENU tecnichal Info
[type] >*<<*<*

Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup

2] Service setup
1] Contrast

3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List

MENU info
[Type] >*<
Network and Subnetwork : NCK and NSCK

Ericsson T28
>*<<*<* menu Tecnichal info
SW vers. and name list
>*<
Network and Subnetwork : NCK and NSCK
<> are the right and left menu's keys

Ericsson T18s/T10/A1018s
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <>
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
<> are the right and left menu's keys
!!!>
Control /Enable SIM Lock!!!

Ericsson R310
Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration

2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock

3)Text's name List
Info personal : >*<

SIM Locking ( 8 digits' code ) ( it could harm your phone )
1) Network
2) Subnetwork
3) SP
4) Corporate

NOTE >*<<*<*> WORKS WITH EVERY ERICSSON AND IT USUALLY REVEALS A HIDDEN MENU

Siemens
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1

Bosch
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

Alcatel
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

Samsung
Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#

Dancall

IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #

Philips

*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.

Panasonic

Panasonic gd90 gd93

*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "

Panasonic gd70
*#9999# SW - Type the code on switch on , during network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with "tone menu "

Acer

Acer V 750

*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]

Genie

Genie DB

*#06# IMEI.
*#2254*# Near Cell Mode.

For every received BTS will be displayed :
Current channel and 2 channel levels

*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.

NEC

NEC db2000

*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [nÂ° 8 cifre]
( it could harm your phone )

Trium

Trium Geo/Geo @ - Astral - Cosmo -Aria

Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage

Trium Galaxy
Push * and type 5806: Production date and SW version

Telit

Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature

Sagem

Sagem MC959/940

Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration

Sagem MC920

Select commands' menu and push *
Displays 5 new menus :

1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )

Sony

Sony CMD Z5/J5

Vers. SW :
Without SIM , switch on phone and type l *#7353273#

Eprom

!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version

Motorola

Motorola V3688

IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK

Mouse Wheel Tricks

noreply@blogger.com (Unknown) — Sun, 04 Nov 2007 22:55:00 +0000

If you have a mouse with a scroll wheel on it, you can do some cool tricks.......

1.Shift & Spin

Ever wonder what happens when you hold down the Shift key on a web page and spin the wheel on your wheel mouse? Explorer goes either back or forward, depending on which direction you spin.

Give it a try. Open up Internet Explorer(or any other browser) and follow a few links. Then, hold down your SHIFT key and spin that wheel.

2.CTRL & Spin

If you are in a web browser (Explorer or Netscape or Firefox) , hold down your Ctrl key and spin the wheel. It makes the text larger or smaller depending on which way you spin. For Opera users, it magnifies both the images and the text

Amazing Hidden Features in XP

noreply@blogger.com (Unknown) — Sat, 27 Oct 2007 13:07:00 +0000

1. Application Secrets.

Defrag
Secret - Hidden Command Line Switch
Instructions - Go to "Start", "Run" and Type defrag c: -b to defragment the Boot and Application Prefetch information. Similar to what BootVis invokes.

Paint
Secret - Image Trails
Instructions - Open an image and hold down Shift then drag the image around to create an image trail.

Secret - 10 X zoom
Instructions - Open an image and select the magnifying glass icon. Left-click exactly on the line below the 8 X.

2. OS Secrets.

Add/Remove
Secret - Hidden Uninstall Options
Instructions - Warning: Proceed at your own risk.
Browse to C:\Windows\inf\ and make a backup copy of sysoc.inf. Then open the original file C:\Windows\inf\sysoc.inf in notepad. Go to "Edit" and select "Replace". In "Find what" type, hide and in "Replace with:" type, then select "Replace All", save and close the file. Go to the control panel, "Add/Remove", select "Add/Remove Windows Components". You will now see many more Windows components to uninstall. Do not remove anything with no label or that you do not recognize or fully understand what it does. Doing so can break certain functionality in Windows.

Control Panel
Secret - Hidden Control Panel Extensions
Instructions - Download and install Tweak UI, launch, go to "Control Panel" and check any item not selected, then "Apply" and "OK". You will now see the hidden control panel extensions.

Device Manager
Secret - Hidden Devices
Instructions - Go to the control panel, "System" icon, "Hardware" tab and select "Device Manager". Select View and Show hidden devices.

Music
Secret - Music from the Installer
Instruction - Browse to C:\Windows\system32\oobe\images\title.wma and play

Shutdown
Secret - Display Hibernate Option on Shut Down dialog.
Instructions - Go to "Start", "Turn Off Computer" and press either Shift key to change "Stand By" button to "Hibernate".

3. Game Secrets

FreeCell
Secret - Instant Win
Instruction - Hold down Ctrl + Shift + F10 during game play. Then you will be asked if you want to Abort, Retry or Ignore. Choose Abort, then move any card to instantly win.

Secret - Hidden Game Modes
Instruction - In the "Game" menu choose "Select Game". Enter -1 or -2 to activate the hidden game modes.

Minesweeper
Secret - Reveal Mines
Instructions - Minimize or close all running applications. Launch Minesweeper, then type xyzzy. Next hold down either shift key for one second. Now when you move the mouse cursor over a Minesweeper square you will see a tiny pixel in the top left corner of your desktop screen. This pixel will change to black when your mouse moves over a mine. You may need to change you desktop background to a solid color other then white or black to see the pixel.

Pinball
Secret - Extra Balls
Instructions - Type lmax at the start of a new ball to get extra balls.

Secret - Gravity Well
Instructions - Type gmax at the start of a new game to activate Gravity Well.

Secret - Instant Promotion
Instructions - Type rmax at the start of a new game to go up in ranks.

Secret - Skill Shot
Instruction - Launch the ball partially up the chute past the third yellow light bar so it falls back down to get 75.000 points. There are six yellow light bars that are worth a varying amount of points :
First: 15.000
Second: 30.000
Third: 75.000
Fourth: 30.000
Fifth: 15.000
Sixth: 7.500

Secret - Test MOde
Instructions - Type hidden test at the start of a new ball to activate Test Mode. No notification will be given that this is activated but you can now left-click the mouse button an drag the ball around.

Secret - Unlimited Balls
Instructions - Type bmax at the start of a new ball. No notificatin will be given that this is activated but when a ball is lost a new ball will appear from the yellow wormhole indefinitely. Once this is activated you will be unable to activate other secrets without restarting the game.

Solitaire
Secret - Instant Win
Instruction - Press Alt + Shift + 2 during game play to instantly win.

Secret - Draw single cards in a Draw Three game
Instruction - Hold down Ctrl + A

How to add the Print Directory feature for folders in Windows XP

noreply@blogger.com (Unknown) — Mon, 15 Oct 2007 04:32:00 +0000

Create the Printdir.bat file
-------------------------------------
To create the Printdir.bat file, follow these steps:
1. Click Start, click Run, type notepad, and then click OK:
2. Paste the following text into Notepad:
@echo off
dir %1 /-p /o:gn > "%temp%\Listing"
start /w notepad /p "%temp%\Listing"
del "%temp%\Listing"
exit
3. On the File menu, click Exit, and then click Yes to save the changes.
4. In the Save As dialog box, type the following text, and then click Save:
%windir%\Printdir.bat

Create a new action for file folders
1. Click Start, click Control Panel (or, point to Settings, and then click Control Panel), and then click Folder Options.
2. On the File Types tab, click File Folder.
3. Click Advanced, and then click New.
4. In the Action box, type:
Print Directory Listing
5. In the Application used to perform action box, type:
printdir.bat
6. Click OK.
7. Click OK, click OK, and then click Close.

How to Crop an Image for Your Desktop?

noreply@blogger.com (Unknown) — Fri, 14 Sep 2007 06:56:00 +0000

a little tutorial to capture image into your desktop to post it to a forum or website

1. make sure the image you want to capture is the active window. Double click in your keyboard (PrtScSysRq) or (Print Screen SrsRq).

2.then go to start ALL PROGRAMS Accessories click Paint. In the paint, upper left side, click EDIT then click paste. If you want to save the image, go to upper side, click FILE and Save as, put the File name of the image and Save as Type JPEG.

3.if you want to choose the image that only others can see, Right click on the image that you save, Hit Edit on your mouse. It will start to launch the paint in the Left upper side of the Paint. Under File and Edit, Click the Square Image then click the Square Image Go to Picture or Image you only want to show. Hold on to your LEFT mouse and by dragging it u could see a square pattern forming. Use that to get the image you would want to show then let go of the mouse. Then Drag the image u want to show to others and let go of your mouse again. Right click on the image you have selected then hit copy. Open new Paint then in the upper side, click Edit, then paste then go to the file option Save put the file Save the image as JPEG.

4.now if you want to show your image to a site or forum go to http://imageshack.us/. Browse the image or picture u want to share into a forum or site. You can choose how big your image by c$$$$$$$ rezise will show in the site or forum by c$$$$$$$ Host it in imageshack. It will go directly to your image link you and you can choose from the image hosting (Thumbnail for forums) (1) (Thumbnail for forums) (2) for more larger image choose at the URL (Hotlink for forums) (1) or (Hotlink for forums)

frnds their is more host for uploading image or picture like www.tinypic.com , www.image4host.com , www.seobyjoe.com. yoy can upload yor picture or image from here also

lol that's it. i hope you guys understand my little tutorial

How To delete an "undeletable" file in XP

noreply@blogger.com (Unknown) — Thu, 10 May 2007 07:38:00 +0000

Open a Command Prompt window and leave it open. Close all open programs. Click Start, Run and enter TASKMGR.EXE Go to the Processes tab and End Process on Explorer.exe. Leave Task Manager open. Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in. At the command prompt type DEL where is the file you wish to delete. Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell. Close Task Manager.

Make your own Home Theater Projector

noreply@blogger.com (Unknown) — Thu, 10 May 2007 07:36:00 +0000

Projection TV Instructions

These plans are very simple! Results may vary by types of materials you use. Works on TVs or monitors.

Materials

These are the things you will need to make your 100" projection TV!

Magnifying glass- Please note if it has a bifocal lens it will not work!!

Sturdy cardboard (or fiberboard).

Duct tape

Black paint or paper

3 pencils

Small mirror (about 3"x3")(optional, you don't really need this).

Four small washers that fit snug around the pencils.

Step1> Measure your screen (vertical and horizontal).

Step2> Cut the side pieces (A and B) for your projector. (Using your measurements from step 1.) Again use 35" for length. This allows the room to adjust the focus. Be sure to cut as straight as possible!

Step 3> Cut the top and bottom pieces (C and D.) (Using your measurements from step 1). Again use 35" for length.

Step 4> Cut out your slider (E). This piece will be the one that slides in and out of your projector! This allows for the focussing. Use your screen measurement from step 2 & 3. Then, find the center, mark it with your pencil!

Step 5> Remove the glass lens form your magnifying glass. Set it exactly on the cent or your slider. Trace around it, and cut our the circle very carefully. Lens must fit snugly in the hole!

Step 6> Now you have all your pieces cut. Now you either paint all pieces black, or cover with black construction paper. If painting, use more than one coat!

Step 7> Now start to assemble your projector. Place pieces A,B,C, & D together and tape them together using your duct tape. Tape both sides so you don't get any light showing through.

Step 8> Now connect the two side together using duct tape. Do this carefully, and now you should have a rectangular box!

Step >9 Insert your glass lens into the hole you cut inb the slider. THIS MUST FIT TIGHTLY. It must be flush with slider. This is a little tricky, but is not impossible!

Step >10 Take to unsharpened pencils and poke them through your slider (E) about one inch from the sides, not the top and bottom. Then put a washer on each end if the pencils. Use some tape if necessary to ensure pencils do not slide in and out! Only push a LITTLE of the pencil through, just enough to secure them. The pencils allow you to push pull the slider in and out to adjust your focus. If pencils interfere with your picture, pull them out after you have focussed your projector and put tape over the holes!

Step 11> Place your slider about halfway in the box. Your slider must fit squarely inside the box!

Step 12> Turn your TV or monitor upside down and carefully attach your projector. Use tape or any other way you desire! Should fit tightly and no light should shine through the box.

Step 13> Turn your TV or monitor on and adjust your slider to focus your picture. This may take a while. The further away from the wall, the larger your picture will be! The darker the room, the clearer your picture will be.

Step 14> If your image is reversed, place a mirror at a 45 degree angle in front of the lens. You may have to turn the screen in its back. Same principle used in school overhead projectors.

Step 15> After the projector is setup and focussed, cut the remaining front pieces away. This allows for better viewing.

Step 16> Have a fun with your new TV or Monitor!!!!

__________________________________________________ ________________

Tips:

1.Make sure your lens's SMOOTH side is facing towards the SCREEN, the BUMPY side should be facing the TV!

2.If the edges or whole picture looks a little soft, and you are using the fresnel lens, you can fix this fairly easily. Put a piece of paper on top of your fesnel lens (on the bumpy side) and trace the biggest whole circle. Once you have done that cut out the circle so you should have a peice of paper with a big hole in the middle. Now trace that onto a black peice of cardboard the same size as your fresnel lens and cut out the circle on that. Now just line up the hole in cardboard with the biggest circle on the fresnel lens, and tape it on. Put it back into your projector and try it out. This will darken the picture a little bit but make it a lot sharper. This works because the $5 staples fresnel lenses are imperfect, so the outside edges of the lens kind of throw the light in weird places defracting the picture. So by utting out the stray light it will sharpen it. I read on another site after i did this, to make a square hole and to experiment with different sizes. I haven't tried it yet, but i'll post here how it works.

__________________________________________________ _______________

1. Process the light spectrum: Use a fresnel lens

2. Enhance the brightness level: Turn the brightness level all the way up on your TV (works better with old tvs), make the room as dark as possible, make sure the box is completely black and sealed.

3. Focus the image: See 'slider card' in the plans

4. Make it crisper: Turn Sharpness on tv to sharpest setting, use a very dark room, and USE A PROFESSIONAL SCREEN.

5. More colorful: Turn color level up high normal level

6. Make it brighter: Once again, the fresnel lens, black box, dark room.

For pic tutorial:

Code:

http://www.gookalian.com/projector/gallery.html

and if you can build good one, maybe you can get result as this(same concept)

Code:

http://ultimatecinema.com/

Uninstalling Windows from Command Prompt

noreply@blogger.com (Unknown) — Thu, 10 May 2007 07:30:00 +0000

One option included in Windows XP is the ability to uninstall XP if you performed an upgrade from Windows 98, 98SE, or Windows Me. The standard method of removing XP is achieved by booting into XP normally and uses the Add/Remove Programs tool in Control Panel. If you are unable to start XP normally, the second option is to load XP in Safe Mode then use the same tool. If you are unable to boot normally or boot into Safe Mode, XP can be removed by uninstalling from a Command Prompt. The procedure is as follows:

Important Note: This procedure is available only if a successful image of the previous operating system was created during the XP upgrade.

Start the computer to Safe Mode with Command Prompt.

At the command prompt, type cd\, and then press ENTER.

Type cd\windows\system32, and then press ENTER.

Type osuninst.exe, and then press ENTER.

On screen instructions will guide you through the uninstall process to revert to the previous operating system.

This procedure can only be performed by users logged on as Administrator or a user with administrative rights.

Every time give a new Email Id to Your Friends

noreply@blogger.com (Unknown) — Tue, 03 Apr 2007 18:35:00 +0000

Now Friends the very first Trick Of Gmail that I Love the most.
So, it goes like this, say you have a email id yahoo-rock@gmail.com
If Your Friends wants to send you a mail then they will send it at this email address.
Now, Let there be three friends of yours, there may be many, just talk about three at present.
Ram
Tam
Pam
If you want to give your friends a unique email id

For Ram It could be "yahoo-rock+ram@gmail.com"
For Tam It could be "yahoo-rock+tam@gmail.com"
For Pam It could be "yahoo-rock+pam@gmail.com"
So, its simple you could add anything after the initial mail by adding a "+" sign.
As all these Email Addresses yahoo-rock+Ram@gmail.com, yahoo-rock+tam@gmail.com, & yahoo-rock+pam@gmail.com are the same as yahoo-rock@gmail.com

Note: This only works when you are sending mails, Not for logging into your account.
Enjoy.....

Tips And Tricks For Ur Computer

noreply@blogger.com (Unknown) — Thu, 22 Mar 2007 13:02:00 +0000

Tip:Lock Computer

Use Windows key plus L to temporarily lock your Computer when stepping away from it - Use your Windows password to unlock.

Tip:PC deep sleep with Vista

Vista may do a better job at conserving energy when you set your PC to hibernate.

In Windows XP, when you set your PC to hibernate, some applications and hardware devices could override the hibernation command and continue to run (e.g virus scan or DVD burners). However, in Windows Vista, your PC will no longer allow applications and hardware to override your hibernate and "stay up late." They will be warned when the computer is about to catch some zzzs, and will have a second to save their progress. So, when you tell a Vista PC to go to bed, it actually listens.

Tip:Rename your digital photos automatically in Windows XP

Unless you really have a lot of time on your hands, I doubt you want to go through the massive folder that contains your European vacation photos and rename them Europe_1.jpg, Europe_2.jpg, and so on down the line. If you're running Windows XP on your computer, you don't have to do this. Simply apply this hack to quickly apply a meaningful label to every picture in the folder.

* First, open the folder and select View > Thumbnails.
* Click the last picture in the folder you want to rename, hold down the Shift key, and click the first picture; this will select them all.
* Right-click the first photo, and select Rename from the drop-down menu.

Windows XP will highlight the filename for the first photo, enabling you to give it a descriptive name. After you type in the name, click the white space outside of the photo and watch as Windows applies the name with a sequential number to each picture in the folder.

Tip:Make it easy to get to Windows Explorer

It's important to have quick access to Windows Explorer so you can easily look around your hard drive(s) for the things you need. But on a Windows XP machine, Windows Explorer is hidden in the 'Accessories' menu -- that's not very handy. Give yourself quick access to it by doing this:

1) Click the Start menu

2) Click on 'Programs'

3) Go to 'Accessories' and highlight 'Windows Explorer'

4) Right-click on 'Windows Explorer' and choose 'Send to...' -- then select 'Desktop'

Now you'll have a shortcut on your Desktop that makes it easy to access Windows Explorer any time you need it -- which is generally every day!

Fast Shutdown and/or Restart From Quick Launch Buttons

noreply@blogger.com (Unknown) — Thu, 22 Mar 2007 13:00:00 +0000

This tip will enable you to create buttons in your quick launch toolbar to quickly and easily shut down and/or restart your computer.

Right click on your desktop, scroll to new..... shortcut
In the location line, for shutdown type; shutdown -s -t 0 ie: shutdown(space)-s(space)-t(space)number zero
Name the shortcut "Shut Down PC" or whatever u want
The new shortcut is now sitting on your desktop, right click on it and go to properties, then click on "change icon". Click OK, then pick a suitable icon, there is a red "off button" icon available, then click apply and ok.
Now drag the icon from your desktop into the quick launch toolbar, resize the toolbar so all the buttons are visible, then delete the shortcut from your desktop.
To create a restart button the location line should read shutdown -r -t 0 name it restart pc and give it a suitable icon for restart.

Now you can shut down or restart your pc in 1 mouse click without having to go through the startup menu.

Complex Button RollOver/RollOut Effects woth flash MX

noreply@blogger.com (Unknown) — Tue, 20 Feb 2007 15:11:00 +0000

Complex Button RollOver/RollOut Effects
by warhero : 24 April 2005
It seems everywhere you look now has some form of complex button. Most buttons that have an animation when rolled over and an animation when you roll out are done with some form of this concept that I intend to share with you.

If you understand basic Flash concepts and just a smidgen of Actionscript, you will catch on in no time.

Here is How

Create a new Flash document.

Open up the document properties by pressing ctrl+j (cmd+j on Mac) and change the stage size to 100x100. Change the Frame Rate to 30.

Rename layer 1 on the main timeline to complexButton. The main timeline should now look like this:

Create a new movieclip by pressing ctrl+F8 (cmd+F8 on Mac). Name it mc_complex.

Double click mc_complex in the library to edit the symbol. Select the Oval Tool(o) and make a 30x30 circle on the stage. In the properties panel set the x and y values for that circle to 0.

Double click the circle to select the Fill and Stroke. Press F8 to convert it to a symbol so we can tween it. Make it into a graphic symbol and name it gr_circle

Still editing the mc_complex movieclip select frame 15 and press F6. This inserts a keyframe. Resize the circle a little bigger than what is there. I went with 40x40.

Right click on any frame between the two keyframes on the timeline and select Create Motion Tween.

Create a new layer and call it actions. Insert a blank keyframe(F7) on frame 15. The timeline for mc_complex should now look like this