Better Rifles.

RIFLE BEDDING BOOK.

noreply@blogger.com (Birgir R.Saemundsson) — Tue, 27 May 2008 16:28:00 PDT

RIFLE BEDDING MANUAL.

HOW TO IMPROVE RIFLE ACCURACY.

The Foundation to rifle accuracy!
When improving the accuracy of rifles,there are many things that need attention.Quality and cleaning of the rifle barrel,stiffness and quality of the bolt action,precision bedding of barreled action into stock,a good and well adjusted trigger,scope mounts,rifle scope itself,and hand loaded ammunition.And not the least,professional smiting of all parts and assembly of rifle.

The single most effective improvement a rifle shooter can do to his rifle is bedding the barreled action properly,with two part epoxy compound,like Bisonite,Devcon,Acraglas,Micro bed,or other quality epoxy bedding compound. Which all rifle shooters can perform,given good instructions.I personally like to work with Bisonite and have for over 37 years.A rifle no matter the accuracy level it delivers in unbedded state,will increase its accuracy and overall performance after Pillar bedding.I have over 37 years experience in this bedding method.There is NONE better !I have one rifle I made myself,that broke a 20 year old world record in Heavy Bench Class 1988 at IBS Nationals in Ohio USA,which is pillar bedded! Rifles from manufacturers such as,
Remington, Winchester,Savage,Browning,Mossberg,Marlin, Howa,Harrington & Richardsson,Weatherby, Sako,Tikka,Mauser,Brno,Colt,Sig Sauer,Voere, Anchütz,Walther,Beretta,Taurus,and all other Bolt action rifles types,will benefit increased accuracy by Pillar Bedding them. Period !

Here are few of the benefits of the Rifle Pillar Bedding, glass bedding.

1.Even and stress less seat of action in stock,both walnut and fiberglass.There will be no bending of Action when guard screws are tightened into stock.(Bending of action will happen when seat in stock is not even). Usually this is a mega problem,to overall performance of rifle and scope/sighting in.
2.Perfect fit of action to the stock,eliminating all micro movement between firings.
(Better group accuracy)
3.Less vibration of barreled action in stock when firing.(Better group accuracy)
4.Rifle holds sighting in adjustments,from one hunting season to another. Sighting in of rifle can change in unbedded state,due to the nature of the wood and fiberglass stocks. Wood can warp,bend,and expand,caused by temperature changes and moisture differences. Fiberglass stocks can after cure and warp and bend,non less than walnut stocks. These changes can ruin good accuracy,if rifle was good before.
5.The Pillar bedding method nullifies the effect of changing wood or fiberglass in stocks,so the accuracy and rifle sighting in,is not affected during changes as in warping,bending,expansion,and after curing.
6. Bedding Increases accuracy, sometimes by up to 150 % in group size. For example a rifle shooting 1 to 1.5 inches at 100 Meters/yards may give you 0.500 to 0.700 inch groups after bedding,and even better ! Rifles that are performing better in unbedded state will increase accuracy ,as an example from 0.500-.700 inch groups and go down to 0.250 to 0.350 inch groups ! After Pillar Bedding. Think about the potential this will give you at longer ranges,lets say out to 500 yards/meters or further out ?

The Rifle Bedding Manual is a Pdf E-Book,with clear,comprehensive and descriptive photographs and instructions and guidance,in how a average rifle shooters can professionally Pillar bed their rifles.Resulting in improved accuracy and consistency.The only thing needed is a Bedding Kit,few common tools,battery drill machine,wood chisels and sandpaper etc.and good instructions as are in the Rifle Bedding Manual.Easy to follow instructions step by step of a bedding method that has over 37 years in use.The most accurate rifles for Precision Bench Rest Competition,are bedded by this pillar bedding method.

To you dedicated rifle shooter,
"only accurate rifles are interesting,and worth shooting and owning".Do you agree ?
Rifle Shooter! What are you waiting for ??????

Copyright: Digital Certified: Adobe pdf. 149 pages with translations.
Birgir Runar Saemundsson Marz 2008.
Supported Languages : English,French,Russian,Korean,Italian,Spanish,
Portuguese,German,Arabic,Greek,Chinese,Japanese,Hindi,Dutch.

Available at websites: http://www.usa-rifles.com/
http://www.eurorifles.com/
http://www.gunsmithknowhow.com/
http://www.beddingmanual.com/

See SLIDESHOW lower on page!

How to make Muzzle Brake

noreply@blogger.com (Birgir R.Saemundsson) — Wed, 12 Dec 2007 08:30:00 PST

Muzzle Brake Manual with blueprint
drawings and installation instructions.

Complete comprehensive in detail,how you can make muzzle
brake, and comes with installation instructions for rifles
and pistols. Muzzle Brake is only 2 1/2" Long.Muzzle Brake
will reduce recoil by 50 % to 65% ,in rifle and guns and ,
are much easier to aim and handle, resulting in "better hits"
Important for the Big Magnums.Used for calibers 222Rem,
cal.22/250Rem, cal.243 Win,cal.6mm PPC,cal.2506 Rem,
cal.6.5mm, cal.270Win,7mm REM Mag,308W,300WM
8mm Rem Mag, 338Mag, and out through,the largest
magnum rifles like cal 375, and 460, for the big and dangerous
game.Can be used for Large Hunting Pistols cal.9mm,
cal.357,cal. 44Mag.cal.45.
Adobe 128 Bit Encrypted PDF Document eBook.
Password Protected. Price $ 9.95 Download eBook

Go to Selling/Download,website: http://www.rifflar.com/

Copyright 2007.Patent Pending USPTO,UK IPO,EPO.

BRS CUSTOM RIFLES. http://www.rifflar.com/

HOW TO MAKE SILENCER NEW ON ! http://www.sidanmin.com/

http://www.silencer.asia/

Pdf E Book Download

Silencer Manual Drawings for Rifles and Pistols

noreply@blogger.com (Birgir R.Saemundsson) — Sat, 24 Nov 2007 05:14:00 PST

GUN SILENCER MANUAL FOR RIFLES AND PISOLS.

Silencer for rifles and pistols in cal.22 ,22 mag, cal.222, cal.243,cal.6.5mm,
cal.7mm, cal.308. And larger calibers of big bore.
Caliber like .357 cal 44 and cal 45 .Air rifles and pistols.
Complete Blueprint and instructions,on how to make them and install .
Silences completely, with subsonic ammunition.
Subsonic speed is under 331.4 m/sec or 1087.3 ft/sec.
Over 30 years experience and use of this type of silencer
prooves the quality of sound suppression.
In a rifle like 22 long rifle cal. with subsonic ammunition
the only sound you hear is the fall of the firing pin !!!!!
Simple and easy to make and install.
Download. Adobe PDF eBook with blueprint drawings.
And instructions.
Price $ 9.95 PayPal 128 Bit Encrypted PDF Document Password Protected.
PURCHASE NOW ! Price $ 9.95 CLICK HERE !

Warning!Utilization is only allowed in Countries where the use of silencers is legal.
Warning! USE only for target and hunting purposes.
Misusing this drawing and information is of No responsibility to the owner of this website
BRS Custom Rifles. Copyright 2007 and
Patent Pending USPTO, UK IPO, EPO and other patent offices.
All Rights reserved.
MORE INFORMATION ! http://www.rifflar.com/

AND http://www.sidanmin.com/silencermanual

http://www.silencer.asia/

NEW ! MUZZLE BRAKE MANUAL. Click Here !

More Information of Muzzle Brake :
http://www.sidanmin.com/muzzlebrakemanual

RIFLE SHOOTING AT 1000 YARDS

noreply@blogger.com (Birgir R.Saemundsson) — Mon, 09 Apr 2007 05:34:00 PDT

Shooting a 1000 yards Long Range Rifle 7 mm Rem Mag

The Greatest Shooting Adventure available !In Amazing Iceland.

This summer I am offering interested rifle shooters and tourists,

to have their Greatest adventure in rifle shooting.

You will be offered to have a shooting session using state of the art

1000 yards competition rifle. Rifle is world record winner

Custom made Heavy Bench rifle,in 7 MM REM MAG.

Specially utilized for this kind of long range shooting,

custom reloads, UNERTL riflescope 32 X. HART BARREL .

Rangefinder used is Barr & Stroud .

CUSTOM made by Birgir Runar Saemundsson BRS Custom Rifles.

GOOGLE BASE

EMAIL ME

ICELAND NATURE & WILDLIFE VIDEO !

CLEANING RIFLE BARRELS !

noreply@blogger.com (Birgir R.Saemundsson) — Wed, 15 Feb 2006 11:38:00 PST

In using rifles to the utmost accuracy,and full potential,it is nessesary to clean the barrel regularly. A hunter shooting a rifle few shots in a single day,should clean the the barrel at end of day. A match shooter shooting in competition cleans barrels after 8-15 shots. It is a good rule to clean barrel when 20-30 shots are through as a maximum shots fired. This depends on size of cartridge case,and bore diameter.The larger the cartridge case versus smaller bore diameter,then the more frequency is needed in cleaning. Cleaning Method 1. After shooting X numbers of shots,the target, varmint or big game shooters should use following method. Wet 2 patches with cleaning solvent (I use Shooters Choice),push from rear,up front through barrel. This takes all loose fouling out. Next it is best to brush the barrel with copper brush,soaked in cleaning solvent,about 10 passes,through barrel. Add solvent to brush after few passes,at muzzle end when brush is out of barrel. After these passes 10 maeby 20 depending on quantity of shots fired and condition of barrel, 2 dry patches are pushed through barrel from rear. Now the barrel should be almost clean ! To clean better it is advisable to soak a plastic brush or fiber brush with solvent and wet the bore of barrel ! Let it stand overnight,and check color of solvent next day. It may come out light green or strong green,depending og fouling in barrel.If it comes out strong green,brush some more with copper brush,and repeat wetting bore with solvent,and let it stand overnight. Wetting barrels is only advisable with safe solvents, read the bottle instructions. Some stronger Ammonia blended solvents can damage barrels if left too long in barrel. It is advisable to leave barrels wet until next shooting starts.
URGENT ! DRY BARREL OUT BEFORE SHOOTING .
Cleaning method 2. Some Rifles can have rough bores,and foul badly. For cleaning them it may be nessesary to use stronger Solvents Ammonia blended. Use the Ammonia blended solvents carefully and only for soaking wet for 15-20 mins.Don´t brush them in with copper brush,this will ruin brush,use plastic or fiber brush.Even abrasives may be used to get out severe fouling,but work carefully with them ! Best is to use patch rolled around a cleaning jag and push through barrel in short strokes,gradually towards the muzzle end. After using Ammonia blended solvents,and or abrasives,it is advisable to use milder solvents to clean barrel and do the colour check overnight ! When cleaning process is done it is good workmanship to dry out chamber of gun,clean locking lug aeria,inside of action and put small dips of grease on locking lugs. Good Shooting !

NEW Website !

noreply@blogger.com (Birgir R.Saemundsson) — Mon, 30 Jan 2006 16:16:00 PST

Hello !

Just launched new website http://www.rifflar.com

Interesting Videos on Google Video see page 3 (Videos) on website .

Hope you enjoy.

Birgir

Better Rifles NOW !

noreply@blogger.com (Birgir R.Saemundsson) — Thu, 12 Jan 2006 08:47:00 PST

Welcome to Better Rifles Blog.

This blog is dedicated to Better Rifles and rifleshooting .
All aspects of rifle handling , maintenance,cleaning sighting in and gunsmithing.
Riflescopes,reloading, components for reloading etc etc.

I hope we can make a good forum for dedicated rifle shooters here.
Believe me it is needed.

Take a look at some interesting sites about rifles, www.best-rifles.com
and www.better-rifles.com and www.rifflar.com

Sincerely

Birgir R. Saemundsson