SharePoint 2013 Tutorials, Articles on SharePoint 2010

Working with Chart Web Part in SharePoint

2014-06-06T12:07:00.000+05:30

In this post, we will discuss how to populate a chart web part from a SharePoint list. Here I am using chart web part in SharePoint 2013. Though Microsoft removed chart web part, you can check this workaround to make chart web part available in SharePoint 2013.

Also, you can check out:

- Microsoft Flow Step by Step Tutorial with Examples

- How to get Absolute URL of List using SharePoint object model?

- Backup and Restore Site Collections in SharePoint 2010 using PowerShell

- Vertical flyout menus in SharePoint 2010

Here I have a SharePoint list name as "Course" which has 5 columns and the data are like below:

Here I want to show a chart (bar) and want to see in Sharepoint 2013 how many trained, novice, intermediate and expert people. Similarly for SharePoint 2010, Asp.net and C#.Net skills.

For this first add a chart web part to the page (Edit Page -> INSERT -> Web Part). Once you will put the chart it will appear like below. Save the page.

After that click on Data & Appearance. Then select Connect Chart To Data as shown in the fig below:

In the next step select "Connect to a List" in the Choose a Data Source section. Then click on Next.

In the next step select the site and the list in the drop down.

In the next step, it will show you the list and the data. Click Next.

The 4th Step Bind Chart to Data is an important step. Follow below instruction. Here

In the Series expand (click on +) Series Properties. Enter the name, here I am putting based on my column names. It should be like below:

Series Name: Trained
Series Type: StackedColumn (From the drop-down select the column).
Y Field: Trained (Select Trained Column from drop down)
X Field: Title (Remember this will be the same for all series)

So it will appear like below:

Then click on the + icon near series like below:

Here also fill the series details like below:

Series Name: Novice
Series Type: StackedColumn (From the drop down select the column).
Y Field: Novice (Select Novice Column from drop down)
X Field: Title (Remember this will be same for all series).

So it will appear like below:

Add all based on the columns. Here I added 4 for each column (Trained, Novice, Intermediate and Expert).

Then click on Finish.

Now your chat will appear like below:

If you want to customize a bit like you want to show the count as well as a image in the top right corner follow below steps.

Here click on Data & Appearance, then click on Customize your chat.

Here select Stacked Column and click Next as shown in the fig below:

You can set the width and Height of the chart web part. then click on Next.

The next step is very important, if you want to Show Legend then you chose Show Legend.

You can go to the Axis and Gridlines tab and if you do not want the Major Gridlines then you can deselect "Show Major Grid Lines" for both X and Y axis.

If you want to show the Labels then you can select the Label and click on Finish.

Finally, your chart will appear like below:

Create web part page in SharePoint 2013

2014-03-24T21:45:00.002+05:30

Here i am going to explain how to create web part page in sharepoint 2013.

Also you can check out:

- Add custom web part properties to visual web part in SharePoint 2010

- Content Editor Web Part in SharePoint 2010

- how to use css in visual web part in sharepoint 2010

1. Go to site Content -> Click on Site asset.

2. Now click on Files tab,then expand the New Document dropdown and choose Web part page.

3. Now Provide the details as below.

4. Click on OK and your web part is created in site page.

5. Go to the site page and click on your web part page and start adding your webpart.

SharePoint 2013 client object model

2014-02-13T20:23:00.000+05:30

In this post we will discuss about various client object model in SharePoint 2013. Also you can check out some posts on:

- Enable Sign in as Different User Option in SharePoint 2013

- Architectural changes in SharePoint 2013

- How to get userprofile properties in SharePoint 2013 object model?

In SharePoint 2013, there were 4 client object models: Managed object model, Silverlight object model, Mobile object model and JavaScript object model.

Here we will discuss about various client object model.

Silverlight object model:
By using Silverlight object model, you can build Silverlight applications, Web Parts, Asp.Net applications, apps for SharePoint and Office, and Silverlight applications for phones that use SharePoint data or SharePoint objects.

The Silverlight client object model dlls are presented inside %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\TEMPLATE\LAYOUTS\ClientBin folder.

Microsoft.SharePoint.Client.Silverlight.dll

Microsoft.SharePoint.Client.Silverlight.Runtime.dll

Microsoft.SharePoint.Client.DocumentManagement.Silverlight.dll

Microsoft.SharePoint.Client.Publishing.Silverlight.dll

Microsoft.SharePoint.Client.Search.Applications.Silverlight.dll

Microsoft.SharePoint.Client.Search.Silverlight.dll

Microsoft.SharePoint.Client.Taxonomy.Silverlight.dll

Microsoft.SharePoint.Client.UserProfiles.Silverlight.dll

Microsoft.SharePoint.Client.WorkflowServices.Silverlight.dll

Microsoft.Office.Client.Policy.Silverlight.dll

Microsoft.Office.Client.TranslationServices.Silverlight.dll

So according to your rwquirement you can use the above dlls to work with silverlight application.

Example of Silverlight client object model:

In this example, we will see the item count for a list.

using (ClientContext clientContext = ClientContext.Current)
{

List objList = clientContext.Web.Lists.GetByTitle("MyList");

clientContext.Load(this.objList);

lblResultCount = this.objList.ItemCount.ToString();

}

It will show number of items in the list.

Mobile client object model:
The Mobile object model can be used to create applications that run on Windows Phones. The Mobile client-side object model contains some functionality that is specific to phones, such as APIs that enable a phone app to register for notifications from the Microsoft Push Notification Service.

The required dlls are found inside %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\15\TEMPLATE\LAYOUTS\ClientBin folder.

The dlls are:
Microsoft.SharePoint.Client.Phone.dll

Microsoft.SharePoint.Client.Phone.Runtime.dll

Microsoft.SharePoint.Client.DocumentManagement.Phone.dll

Microsoft.SharePoint.Client.Publishing.Phone.dll

Microsoft.SharePoint.Client.Taxonomy.Phone.dll

Microsoft.SharePoint.Client.UserProfiles.Phone.dll

Microsoft.Office.Client.Policy.Phone.dll

Microsoft.Office.Client.TranslationServices.Phone.dll

Managed client object model:
The Managed object model can be used to create .NET applications that run on Windows operating systems that aren't phones or SharePoint servers. The managed client object model dlls are found inside ISAPI folder.

Microsoft.SharePoint.Client.dll

Microsoft.SharePoint.Client.Runtime.dll

Microsoft.SharePoint.Client.ServerRuntime.dll

Microsoft.SharePoint.Client.DocumentManagement.dll

Microsoft.SharePoint.Client.Publishing.dll

Microsoft.SharePoint.Client.Search.Applications.dll

Microsoft.SharePoint.Client.Search.dll

Microsoft.SharePoint.Client.Taxonomy.dll

Microsoft.SharePoint.Client.UserProfiles.dll

Microsoft.SharePoint.Client.WorkflowServices.dll

Microsoft.Office.Client.Education.dll

Microsoft.Office.Client.Policy.dll

Microsoft.Office.Client.TranslationServices.dll

Microsoft.Office.SharePoint.ClientExtensions.dll

JavaScript client object model:
JavaScript client object model does not contain any dlls, rather it contains .js files. These .js files are located inside LAYOUTS folder and mainly functionality exists inside SP.js and SP.Core.js. The JavaScript object model can be used in inline script or in separate .js files.

Replace "Add New Item" Link Text to something Different Link Text in SharePoint 2010

2014-01-13T00:17:00.000+05:30

This article explores to user's requirement is to change the "Add New Item" link text to " Different Link text", so that it will be more meaningful on a list.

Also, you can check out some posts on:

- Microsoft Flow tutorial

- Disable default email for approval workflow in SharePoint 2010 designer

- Bind dropdownlist from SharePoint list in InfoPath 2010

By default the "Add new item" appears like below:

Follow the below steps to change the text:

1. Go to the target page >> Site actions>> Edit Page

2. Insert a CEWP just below the list view web part.

3. Place the cursor in CEWP, Click on "Edit HTML Source" link from HTML Ribbon Item's drop down menu. check fig below:

4. In Content Editor web part enter the script:

<script type="text/javascript">
document.getElementById("idHomePageNewItem").innerHTML="Add New InterviewTracker"
</script>

5. Save the page! see the result in action, it will appear like below:

Hide fields in NewForm, EditForm and DispForm in SharePoint 2010 using SharePoint Manager

2013-11-27T21:55:00.003+05:30

In this post, we will discuss how we can hide a field from NewForm, EditForm and Display Form in SharePoint 2010 using SharePoint Manager Tool.

To know more about SharePoint Manager Tool, you can follow my previous article.

Also, you can check my previous posts on:

- Working with Resource file in SharePoint 2010

- Implement a breadcrumb into SharePoint 2010 website

- Deploy custom images to SharePoint2010

Read Show hide fields based on permission in SharePoint list form using Client Object Model

To do this through SharePoint Manager, Open the Tool by double-clicking on the exe file.

Then from the left-hand side, you can select the particular column name from the left side of the tool and then you can change the property ShowInDisplayForm to false, like that you can change for other fields also. Check the fig below:

Read an article on Microsoft Flow Step by Step Tutorial with Examples

Methods available in UserProfileService in infopath 2010

2013-10-08T23:08:00.002+05:30

In this post we will discuss what are all the methods are available in UserProfileService.asmx web service in infopath in SharePoint 2010.

Also you can check out my previous posts on:

- SharePoint Designer 2010 Best Practices

- hide ribbon in sharepoint 2010

- Change master page programmatically SharePoint 2010

While creating a data connection, we can make the data connection by calling the Userprofileservice web service.
1. When we connect to the Userprofileservice using the connection
http://ServerName/_vti_bin/UserProfileService.asmx

2. we get following services to retrieve data.

3. Like using GetUserByName service,we can get all user information.

4. Using GetCommonManager service,we can get common manager of an user.

check the figure below for all other methods.

SharePoint developer walkin in various locations

2013-10-06T22:28:00.004+05:30

Here is a SharePoint developer walkin in Bangalore for various location.

Experience: 3.5 - 6 years

Job Location: Bengaluru/Bangalore, Chennai, Gurgaon

Company Name: Accenture

Skills : SharePoint Developer
Exp : 3.5 to 6 Years

Job Location : Bangalore/Chennai/ Gurgaon

Interview Location : Bangalore/Chennai/ Gurgaon

Interview Date : 12th Oct 2013 ( Saturday )

If interested, Kindly send your updated CV to karthikeyan.v@adecco.co.in with the following details:

Date of Birth -
Current CTC -
Expected CTC -
Notice Period -
Current Location -
Available for 12th Oct ( Sat ) Interview ( Yes / No ) -

Regards

Infopath form status showing installing while deployment in SharePoint 2010

2013-09-22T00:37:00.001+05:30

In this post we will discuss how to solve when the infopath form shows status as installing in SharePoint 2010. Also you can check my previous posts on:

- Get icon for different file types in SharePoint 2010

- Create event receiver in Sandboxed solution is SharePoint

- Create an approval workflow in SharePoint Designer 2010

Sometimes when you upload an infopath form template in the central administration, it will stuck and shows installing status in the central administration. You can see this in the Central Administration -> Manage Form Templates.
The problem is the wsp related to the infopath has not been properly deployed. Check out this article to know more about how to deploy infopath form using PowerShell and STSADM command.

Solution:

Open SharePoint 2010 central administration, then Go to System Settings -> Manage Farm Solution. Here check the deployment status for the wsp file. If the deployment status in Deploying (scheduled at date..) then Click the wsp and cancel the deployment.

Then go to Central Administration -> Solution Properties then Deloy the Solution again. This time it should be successful.

Once the wsp deployment completes then the infopath form will also deploy successfully.

Limitations of workflow in SharePoint 2010

2013-09-04T01:57:00.002+05:30

Here we will discuss some of the limitations of SharePoint 2010 workflow. You can read previous posts on:

- Get icon for different file types in SharePoint 2010

- Disable default email for approval workflow in SharePoint 2010 designer

- Create list item using JavaScript object model in SharePoint 2013

1- SharePoint 2010 can have only one workflow execution host per SharePoint 2010 farm, shared between all web applications. Because workflow is not a service in SharePoint 2010.
2- Sometimes sharepoint 2010 workflow in fact performance because they are frequently hydrated and dehydrated between different tiers of the farm.

3- Workflows execute under the security context of the site's application pool as a super user which is not preferable always.

4- Since workflows run as a super user in SharePoint 2010, sandboxed solutions cannot be used to host a programmatic workflow. But you can create a workflow action in sandboxed solution and use that in SharePoint 2010 designer workflow.

5- SharePoint 2010 is tightly coupled with a specific version of .NET Framework and Windows Workflow Foundation, so very difficult to accept latest workflow technologies from Microsoft.

Hope we will see some very good changes in workflow area in SharePoint 2013.

SharePoint walkin in Capgemini for developers and senior developers

2013-08-30T23:09:00.004+05:30

Capgemini is conduction walkin on 31st Aug 2013. Below are the job details:

Work Location - Bangalore

SharePoint Developers & Senior Developers

- SharePoint 2010, MOSS 2007

- SharePoint Designer

- Skills / knowledge on.NET Framework 3.5
- Custom Web Part development for MOSS 2007/ SharePoint 2010, User Control

- Microsoft design patterns & practices

- Experience with SharePoint Administration.

- Experience with earlier releases of SharePoint is highly valued.

Interested candidates can Walk In @ below mentioned address

Date- 31 - August - 2013

Interview Time- 9.30AM - 4.00PM

Capgemini India Pvt. Ltd
8th Floor, Crescent 2, (Enter from Gate),
Prestige Shantiniketan,
Sadaramanagala Village,
Whitefield Main Road,
Bangalore - 560 048

Landmark : Opposite to ICICI Building

Interview Location SPOC – Lubna Farheen

Details for Personal interview:
- Carry Print out of Interview Call Letter
- 2 Passport size photograph
- Revised Salary Slip
- Current Employers offer letter
- Highest Degree Certificate

Regards,
Capgemini

Get icon for different file types in SharePoint 2010

2013-08-20T21:51:00.000+05:30

In this post we will discuss how we can get icon for different file types in SharePoint 2010. Also you can check out my previous posts on:

- How to get value from people picker control in infopath in SharePoint?

- Disable default email for approval workflow in SharePoint 2010 designer

- How to make date time picker read-only in InfoPath 2010?

If you are working in custom search and your search result in returning various file types like
html, pdf, excel or word etc. and you want to show a small icon for corresponding file types then this article will help you.

This function will take parameter as the itemURL and it will return corresponding icon URL. MapToIcon function of SPUtility class will give us the iconURL.

private string GetIconURL(string itemURL)
{
string iconURL = string.Empty;

iconUrl = "/_layouts/images/" + SPUtility.MapToIcon(SPContext.Current.Web, itemURL, string.Empty, IconSize.Size16);

return iconURL;
}

How to Configure SSRS for SharePoint Integration Mode in SharePoint 2010?

2013-08-10T02:42:00.000+05:30

Here in this article we will discuss how to Configure SSRS for SharePoint Integration Mode in sharepoint 2010? Also you can check out my previous posts on:

- Change due date for Task list in SharePoint designer 2010 workflow

- How to create a Site Definition using Visual studio 2010 in SharePoint 2010?

- Working with SharePoint 2010 search web service

SSRS has two modes.
1-Native mode:Build reports by hand and then look at them.

2-Integration mode:SharePoint Integration mode allows you to add Reporting Services content types to SharePoint, and then build and manage your reports from SharePoint.
Below are the steps:

Step-1. Click Start -> All Programs -> Microsoft SQL Server 2008 R2 -> Configuration Tools -> Reporting Services Configuration Manager.

Step-2. On pop-up window, click Connect.

Step-3. From the left-hand side of the window, click Web Service URL.

Step-4. Click the Advanced button.

Step-5. Click Add for the HTTP section.

Step-6. Select Host Header Name and enter raj.com.

Step-7. Click OK.

Step-8. Highlight the "all assigned listener" item above it and click Remove.

Step-9. Click OK.

Step-10. Click Database on the left.

Step-11. Click the Change Database button.

Step-12. Select "Create a new report server database" and click Next.

Step-13. For "Connect to Database Server," accept the defaults and click Next.

Step-14. From the Report Server Mode, select SharePoint Integrated Mode.

Step-15. Click Next.

Step-16. For Authentication Type, leave Service Credentials and click Next.

Step-17. From the Summary screen, click Next.

Step-18. Everything will be successful, and you can click Finish.

Step-19. All other settings should work as it is, so click Exit.

Disable default email for approval workflow in SharePoint 2010 designer

2013-08-09T22:22:00.000+05:30

In this post we will discuss how to disable default email notification for approval workflow in SharePoint designer 2010. Also you can check out my previous posts on:

- E-Mail Event Receivers in SharePoint 2010

- Show SharePoint list data in repeating table in infopath 2010 using SharePoint object model

- Architectural changes in SharePoint 2013

Before reading this, check out this article on Reusable Approval workflow in SharePoint designer 2010. If you will create workflow like explained in this article then by default
SharePoint send notification to the workflow initiator when the task is created and when item is rejected like this.

To disable this emails, Open the SharePoint site using designer and then click on the workflows link from site objects and then select your workflow.

Then click on the Approval link as shown in the figure below:

This will open the customize page for overall task process. From this page click on "Change the behavior of the overall task process" from the Customization link as shown in the fig below:

Now from the "When the Task Process Starts" select "then Email Workflow Context:Initiator" and select Delete Action as shown in the fig below:

This will delete the email which will disable sending email when workflow starts.

Similarly if you want to disable the email when approver reject the email then go to "When the Task Process Completes" and then go to the end "if Variable:IsItemDeleted equals Yes" and Delete the Else condition Email Workflow Context:Initiator as shown in the fig below:

SharePoint 2010 designer Workflow not publishing error

2013-07-29T22:55:00.000+05:30

If you are working in SharePoint 2010 designer workflow, you might get an issue while publishing a workflow. Sometimes if you modify the workflow and publish it, but SharePoint still shows the old details.

Before that, you can also check out my previous posts on:

- Bind drop-down list from SharePoint list in InfoPath 2010

- Copy or Move files from one folder to another folder using SharePoint 2010 object model

- Add custom web part properties to the visual web part in SharePoint 2010
Reason:
The reason behind SharePoint shows the old version is that, SharePoint Designer cache workflow activities in the local user folder. So it is actually publishing the cached workflow but not the modified one.

Solution:
Open this folder C:\Users\[username]\AppData\Local\Microsoft\WebsiteCache and delete the cache which named in your site name.

Now restart SharePoint designer 2010 and try to publish the workflow. Now your updated version should appear. The same error can be resolved in SharePoint designer 2013 also.

Read an article: Microsoft Flow Step by Step Tutorial with Examples

How to make date time picker read-only in InfoPath 2010?

2013-07-25T21:48:00.001+05:30

In this post we will discuss how to make date time picker read-only in InfoPath 2010. Also you can check out my previous posts on:
- Get internal name of a field in SharePoint 2010

- Attach event receivers to SharePoint list using PowerShell

- How to get userprofile properties in SharePoint 2013 object model?

There are certain controls like Textbox, Rich Text Box can made read only by simply right click and go to the properties and then navigate to the Display tab and then select the check box Read-only . But controls like Dropdownlist, Check box, Date Picker, Date and Time Picker we can not make read-only like this.
To an alternative approach you can add rules to the control and you can make disable the control.

Or You can use Conditional Formatting to make the control disable.

But if you really do not need user to select a date, then it is better to use a Text box and set a formula Today() or Now() which will populate the current date to the textbox.

Summery is if you want to make a date and time picker control read-only in InfoPath 2010, you must use conditional formatting.

Bind dropdownlist from SharePoint list in InfoPath 2010

2013-07-15T23:36:00.000+05:30

In this post we will discuss how we can bind a dropdownlist from a SharePoint list in InfoPath 2010. Also check out my previous posts on:

- Read SharePoint 2010 list data using jQuery

- Add custom Submit button in InfoPath form in SharePoint 2010

- Set the Bing Maps key at the web and farm level in SharePoint 2013

Follow below steps:
Step-1:
Open InfoPath (Start -> All Programs -> Microsoft Office -> Microsoft InfoPath Designer 2010), then select Blank Form and Click on Design Form.

Step-2:
Then from Home tab go to the Controls section and add a dropdownlist to the InfoPath form.

Step-3:
From the Ribbon select Data tab and select Data Connections as shown in the figure below:

Step-4:
In the Data Connections wizard click on Add... as shown in the figure below:

Step-5:
In the next step select Create a new connection to Receive data and click on Next as shown in the figure below:

Step-6:
In the next step select SharePoint library or list and click Next as shown in the figure below:

Step-7:
In the next step give the SharePoint site details and Click on Next as shown in the fig below:

Step-8:
Then Select the list from which you want to bind the data as shown in the fig below:

Step-9:
In the next step, select the fields which you want to retrieve and sort order and click on Next as shown in the fig below:

Step-10:
Then click on Next and do not modify anything for Store a copy of the data in the form template.

Step-11:
Then give a name for the data connection and select the checkbox Automatically retrieve data when form is opened as shown in the fig below and click on Finish.

Step-12:
Now Right click on the DropDownList and Select Drop-Down list properties and optionally change the field name and Select Get Choices from an external data sources. And in the Data Source field select the data source name that we have just created. Here you can change the Display name field to what ever field you want.

Step-13:
Now you can publish the form. The data should bind from the SharePoint list as shown in the figure below:

InfoPath cannot open the selected form because of an error in the form's code. Policy settings prevent opening Internet forms with managed code. To fix this problem, contact your system administrator

2013-07-14T14:16:00.001+05:30

In this post we will discuss how to solve an infopath error which I got while opening infopath form in SharePoint 2010. The full error message is "InfoPath cannot open the selected form because of an error in the form's code. Policy settings prevent opening Internet forms with managed code. To fix this problem, contact your system administrator".

You can check out my previous posts on:

- Disadvantages of external lists in BCS

- PowerShell cmdlets for SharePoint 2010

- Add custom send to destination in ECB menu in SharePoint 2010
Follow below steps to solve the error:

1. Go to file. Click on "Advance form Options"

2. From the form Option dialog select "Security and Trust" option

3. Uncheck "Automatically determine security level(recommended)" and select "Full Trust(the form has access to files and settings on the computer)"

4. Click ok

Now the error should go.

System.Security.SecurityException Request for the permission of type 'Microsoft.SharePoint.Security.SharePointPermission, Microsoft.SharePoint.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed.

2013-07-13T02:20:00.000+05:30

I got this error while publishing an Infopath form which has object model code in SharePoint 2010. The full error message is "System.Security.SecurityException
Request for the permission of type 'Microsoft.SharePoint.Security.SharePointPermission, Microsoft.SharePoint.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed.".

Also you can check out my previous posts on:
- Fix width of master page in SharePoint 2010

- Tutorial on User Profile service application in SharePoint 2013

- Custom timer job sharepoint 2010

Reason:
By default SharePoint is configured with a security policy called WSS_Minimal. This policy definition does not grant access to the SharePoint object model.

Solution:
We need to give full trust level in web application web.config file. For this Navigate to C:\inetpub\wwwroot\wss\VirtualDirectories\80\<Web Application>

Add the below line to the web applications web.config file in system.web section:

<trust level="Full" originUrl="" />

Now it should work.

This session has exceeded the amount of allowable resources - infopath form error

2013-07-12T22:13:00.003+05:30

In this post we will discuss how to solve an infopath 2010 error "this session has exceeded the amount of allowable resources".

You can also check out my previous posts on:
- Add jQuery in visual web part in SharePoint 2010

- Add items to SharePoint list using PowerShell

- Dataview webpart in SharePoint 2010

Reason:
The error usually comes if the thresholds set for Number of actions per postback increases.

Solution:
Open SharePoint 2010 Central Administration. Go to General Application Setting and then click on Configure InfoPath Forms Services from InfoPath forms Services section as shown in the figure below:

Here we need to change 2 things.

1- From the Configure InfoPath Forms Services page go to Thresholds section and Change the value set for Number of actions per postback: to max of 250 or 300 as per your requirement. By default it was set to 200.

2- Then go to User Sessions and Change value set for Maximum size of user session data: to a maximum value according to your requirement. The default value set was to 4096 kilobytes.

Check out the figure below:

The amount of data that was returned by a data connection has exceeded the maximum limit that was configured by the server administrator SharePoint infopath 2010 error

2013-07-12T22:06:00.000+05:30

In this post we will discuss how to resolve the infopath 2010 error message"
The amount of data that was returned by a data connection has exceeded the maximum limit that was configured by the server administrator.

Click OK to resume filling out the form. You may want to check your form data for errors. ".

You can also check out my previous posts on:
- Attach event receivers to SharePoint list using PowerShell

- Backup of Site collection in SharePoint 2010

- Tutorial on Create SharePoint 2010 designer workflow

Reason:
The warning message usually comes if The Default data connection response size increases. By default The Default data connection response size is set to 1500kb for Form Services.

Solution:
Open SharePoint 2010 Central Administration. Go to General Application Setting and then click on Configure InfoPath Forms Services from InfoPath forms Services section as shown in the figure below:

Then from Configure InfoPath Forms Services page go to Data Connection Response Size and increase that to more than the default value according to your requirement. By default it will be 1500 kb. Change like below figure.

Now the error should go.

Could not load file or assembly 'Microsoft.Sharepoint.Sandbox' or one of its dependencies. An attempt was made to load a program with an incorrect format.

2013-07-05T23:48:00.000+05:30

In this post we will discuss about how to solve the error message "Could not load file or assembly 'Microsoft.Sharepoint.Sandbox' or one of its dependencies. An attempt was made to load a program with an incorrect format."

Also you can check out my previous posts on:
- Tutorial on User Profile service application in SharePoint 2013

- Attach event receivers to SharePoint list using PowerShell

- Workflow custom form changes in SharePoint 2013

Error:
While working with SharePoint 2010 with Visual Studio 2010 I got the below error:
Could not load file or assembly 'Microsoft.Sharepoint.Sandbox' or one of its dependencies. An attempt was made to load a program with an incorrect format.

This error came for a Sandboxed solution.

Solution:
Open the Bin folder and Remove the dll from the bin folder.

Now when you debug the error should not come.

Enable target audience in list in SharePoint 2010

2013-07-03T22:51:00.001+05:30

In this post we will discuss how to enable target audience in SharePoint list or document library using browser in SharePoint 2010.

Also you can check out my previous posts on:

- Tutorial on User Profile service application in SharePoint 2013

- Create content type in SharePoint 2013

- Create document sets in SharePoint 2013

The steps will be same for List or document library. By default target audience is not enabled for list or document library. Follow below steps to enable target audience in list or document library:
Step-1:
Open the list and navigate to the List Settings from the Ribbon. In the List Settings page. Click on Audience targeting settings from the General Settings section as shown in the figure below:

Step-2:
Then from the Modify List Audience Targeting Settings page, Select the checkbox Enable audience targeting as shown in the figure below:

SharePoint developer openings in Accenture

2013-06-07T01:06:00.006+05:30

Here is an opening in SharePoint with Accenture.

Job Description:
Experience required for the Job: 3 - 6 years

This is permanent and direct payroll with Accenture only....

Client : Accenture
Skills : SharePoint Developers

Position : SSE

Exp : 3 to 6 Yrs

Job Locations : Hyderabad

If interested, Kindly send your updated CV to karthick.m@adecco.co.in with the following details...

Date Of Birth -

Current CTC -

Expected CTC -

Notice Period -

Current Location -

Open for Hyderabad Location ( Yes / No ) -

Thanks and Regards,

The form cannot be rendered. This may be due to a misconfiguration of the Microsoft SharePoint Server State Service. For more information, contact your server administrator

2013-05-30T08:47:00.001+05:30

Also you can check out my previous posts on:

- Backup of Site collection in SharePoint 2010

- Event Receivers in SharePoint 2010

- Create External List in SharePoint 2013

Error:
I got this error message while working in Infopath 2010. The full error message is "The form cannot be rendered. This may be due to a misconfiguration of the Microsoft SharePoint Server State Service. For more information, contact your server administrator".
Reason:
This error comes if the Microsoft SharePoint Server State Service is not activated.

Solution:
You can activate by using PowerShell or by using the Configuration Wizards. In this post we will discuss about how we can activate using Configuration Wizards.

Follow below steps:
Step-1:
Open SharePoint Central Administration and click on Configuration Wizards as shown in the figure below:

Step-2:
From the Configuration Wizards page, click Launch the Farm Configuration Wizard. Then click on Start the Wizard.

Step-3:
On the services configuration page, in the Services section, select the State Service check box as shown in the figure below:

Step-4:
Click Next. Complete any other configuration steps for the server farm. And then click Finish.

Enable Sign in as Different User Option in SharePoint 2013

2013-05-28T21:41:00.002+05:30

Here in this article, we will discuss the steps to enable "Sign in as Different User" Option in SharePoint 2013.

In SharePoint 2013 there is no option for "Sign in as different user" default. So we need to follow certain steps to Enable this option manually.

If you will go to the "System Account" drop-down, You won't find any option as "Sign in as Different User".
The below are the steps to enable "Sign in as Different User" Option in SharePoint 2013

Step-1:
Go to the following path, You will find one "Welcome.ascx" file there. We need to edit this file to enable this option.

C:\Program Files\Common Files\microsoft shared\Web ServerExtensions\15\TEMPLATE\CONTROLTEMPLATES

Step-2:
Open the file welcome.ascx in Visual studio and add the below part of the code above the tag that has "ID_RequestAcess" and save it.

<SharePoint:MenuItemTemplate runat="server" ID="ID_LoginAsDifferentUser"
Text="<%$Resources:wss,personalactions_loginasdifferentuser%>"
Description="<%$Resources:wss,personalactions_loginasdifferentuserdescription%>"
MenuGroupId="100"
Sequence="100"
UseShortId="true"
/>

Note: You should add the above code above the tag that has ID_RequestAcess.

Step-3:
Now Refresh your site and you will now find "Sign in as different user" will be enabled. You will find this option in the "System Account" dropdown.

The above are all the steps to enable Sign in as Different User Option in SharePoint 2013.