BIT Electrical and Gasfitting LTD

BIT Films Electrical and Mechanical Rooms

2012-05-03T07:21:00.001-07:00

With mechanical and electrical technologies being very complex, BIT Electrical and Gasfitting Ltd. will film in HD your mechanical and electrical operation to assist staff in the day to day operations of your building or plant. These videos are very helpful for new employees to understand the building or plant functions.
Many companies are losing older employees and when they leave they take their knowledge with them. BIT film production makes the transition of knowledge through video simple, this maximizes the new employees immediate knowledge and assists operators to refresh the complex annual maintenance of equipment.The operational manuals are available through YouTube links on DVD or Blu-Ray or on Jump Sticks.

New Logo

2012-04-26T07:43:00.004-07:00

Best Integrated Technologies BIT

GIF Format for Advertising..... CLICK ON IMAGE

2011-12-24T12:30:00.000-08:00

BIT will have adds in GIF (Graphics Interchange Format) .CLICK ON IMAGE

Easy to increase RAM in a most laptops

2011-10-03T12:02:00.000-07:00

BIT is a member of Teca, SICA, and Kelowna Chamber of Commerce

2011-10-03T10:35:00.001-07:00

Teca stands for thermal environmental comfort association.
New regulations well be in place and to qualify as a controls contractor a company must have this certification to bid on work.
I will be updating important information in the days forward.

SICA is Southern Interior Contractors Association

BIT at work

2011-07-20T07:45:00.000-07:00

This is a sample of BIT's electrical conduit work,lets have look around.
http://www.youtube.com/watch?v=18Q5qwLHejg

The Gas fireplace upgrade

2011-01-16T13:49:00.001-08:00

When I say upgrade the fireplace here is what I do.
The low voltage connections should be cleaned and soldered for a great electrical connection,why you ask well would electronics be as advanced if all the wire connections where just wire nutted or crimped "NO" "WAY"
The flame of the pilot generates less that 1/2 volt and less than 10 milliamps.
The piont is re-crimp and solder all gas valve millivolt connections.
Replace the wall switch because the contacts oxidies in a year or so.
Most wall switches have internal grease which can inhibite function of the the gas valve so excerising the switch on/off 10 times or so can clean the internal contacts and do this while the pilot flame is not lit.
So to recap,solder the millivolt connections,if using a thermostat bypass the anticapator by sliding dial to the solder piont.(mercury type)
Use an approved glass cleaner,also use compressed air with a double bagged vacuum cleaner to clean flue and fans and pilot.

Sony 3D Camera HDR-TD10

2011-01-09T12:38:00.000-08:00

This new 3D Camcorder is my next video recorder.
Features are glasses free technolgy.
SD card to USB
The TV's need to catch up although.
$1600 dollars is not bad to be the first one in town or on You Tube
http://www.youtube.com/user/genbeau#p/a/f/0/gdBFmOR5Feg

The furnace

2011-01-08T07:56:00.003-08:00

Things to look for when a serviceman cleans your furnace.If the serviceman has no compressor your not getting professional service.
Is he certified?
Check list of a clean furnace.
1. Remove and wash the burners in warm water.
2. Remove and clean the flame rod,make sure the serviceman uses a carbon needle file.
3.Remove and clean spark ignitor rod with carbon needle file.Set gap to .225 thousands of an inch
4. Remove and brush blower and motor,the serviceman should clean the blower outdoors with an air compressor or nitrogen.
5. If furnace is a hot surface igntion system,the ignitor should be free of cracks and residue.
6. Remove flue pipe (mid efficient) clean inducer blower wheel with compressed air and vacuum at same time.The tube to the inducer motor pressure switch should be cleared of any ash.
7. Re-install all devices
8. Check functions and amperage of motors.
9. Motors drawing more current then rated, install dense air filter,balance supply air.
10.Check functions for 5 minutes minium.

These steps are for a clean furnace and is one hour of work.
There maybe more steps required and are additional charged time for ,temperature rise and clocking the gas valve.

2010-10-11T08:32:00.000-07:00

Electrical & Controls specialized in the design, installation and service of the following systems:
Best integrated technologies with the best in town service:
BIT Electrical and Gasfitting LTD.

Structured Cabling Systems for Data, Video, and Voice Systems
Access Control Systems
Video Surveillance Systems
CSA Certified Control Panels
Public Address Systems
Intercom Systems
Audio/Video Distribution Systems
Fire Alarm Systems
Emergency Lighting Systems
Gasfitting controls and service
High Resolution Borescope for Heat Exchanger Inspections
All Low Voltage Connections are Soldered to MIL-S-45743E specifications
CFC Certified Refridgerants
AFSR certified Electrician (no restriction on voltages or amperes)
B Gasfitter Certified
Power Vented Appliances to 750,000 BTU's
Welding and Gas line Connections
All Electrical Equipment 500,000 Volts to 24 Volts
Bonded in Electrical and Gasfitting
Insured liability
Off the Grid Technolgies
Solar,Wind,Fire
Ground Potentail Energy