SEO ENGINE

Using Backtrack For Penetration WEP

2009-12-11T09:25:00.002+07:00

To cr**k WEP, you'll need to launch Konsole, BackTrack's built-in command line. It's right there on the taskbar in the lower left corner, second button to the right. Now, the commands. First run the following to get a list of your network interfaces:

    airmon-ng

The only one I've got there is labeled ra0. Yours may be different; take note of the label and write it down. From here on in, substitute it in everywhere a command includes (interface). Now, run the following
four commands. See the output that I got for them in the screenshot below.

    airmon-ng stop (interface)
    ifconfig (interface) down
    macchanger --mac 00:11:22:33:44:55 (interface)
    airmon-ng start (interface)

If you don't get the same results from these commands as pictured here, most likely your network adapter won't work with this particular cr**k. If you do, you've successfully "faked" a new MAC address on your network interface, 00:11:22:33:44:55.
Now it's time to pick your network. Run:

airodump-ng (interface)

To see a list of wireless networks around you. When you see the one you want, hit Ctrl+C to stop the list. Highlight the row pertaining to the network of interest, and take note of two things: its BSSID and its channel (in the column labeled CH), as pictured below. Obviously the network you want to cr**k should have WEP encryption (in the ENC) column, not WPA or anything else.

Like I said, hit Ctrl+C to stop this listing. (I had to do this once or twice to find the network I was looking for.) Once you've got it, highlight the BSSID and copy it to your clipboard for reuse in the upcoming commands.
Now we're going to watch what's going on with that network you chose and capture that information to a file. Run:

airodump-ng -c (channel) -w (file name) --bssid (bssid) (interface)

Where (channel) is your network's channel, and (bssid) is the BSSID you just copied to clipboard. You can use the Shift+Insert key combination to paste it into the command. Enter anything descriptive for (file name). I choose "yoyo" which is the network's name i'm cr**king.

You'll get output like what's in the window in the background pictured below. Leave that one be. Open a new Konsole window in the foreground, and enter this command:

aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 -e (essid) (interface)

Here the ESSID is the access point's SSID name, which in my case is yoyo. What you want to get after this command is the reassuring "Association successful" message with that smiley face.

You're almost there. Now it's time for:

aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 (interface)

Here we're creating router traffic to capture more throughput faster to speed up our cr**k. After a few minutes, that front window will start going crazy with read/write packets. (Also, I was unable to surf the web with the yoyo network on a separate computer while this was going on.) Here's the part where you might have to grab yourself a cup of coffee or take a walk. Basically you want to wait until enough data has been collected to run your crack. Watch the number in the "#Data" column—you want it to go above 10,000. (Pictured below it's only at 854.) Depending on the power of your network (mine is inexplicably low at -32 in that screenshot, even though the yoyo AP was in the same room as my adapter), this process could take some time. Wait until that #Data goes over 10k, though—because the crack won't work if it doesn't. In fact, you may need more than 10k, though that seems to be a working threshold for many.

Once you've collected enough data, it's the moment of truth. Launch a third Konsole window and run the following to cr**k that data you've collected:

aircr**k-ng -b (bssid) (file name-01.cap)

Here the filename should be whatever you entered above for (file name). You can browse to your Home directory to see it; it's the one with .cap as the extension. If you didn't get enough data, aircr**k will fail and tell you to try again with more. If it succeeds, it will look like this:

The WEP key appears next to "KEY FOUND." Drop the colons and enter it to log onto the network.
Also read to my post about firewall for network security.

Install Driver HP Laserjet P1006 in Ubuntu

2009-11-25T09:01:00.005+07:00

The reluctance of many people using linux is because its hard to find and obtain the support hardware drivers and is compatible with linux version used.
One of the favorite linux distro like ubuntu is still difficult supports a variety of hardware drivers that are used as printers.
It is also understandable because the software developers of computer hardware manufacturers haven't 100% support the open source community. Thus the difficulty of open source developers like linux is to create applications for the approach of the latest hardware drivers.
Below will be explained briefly how to install the HP LaserJet P1006 drivers in Ubuntu 9.10. The eight easy steps is as follows:

First open a terminal (Applications ==> Accessories ==> Terminal).

1. Copy the following code right into the terminal:

wget-O foo2zjs.tar.gz http://foo2zjs.rkkda.com/foo2zjs.tar.gz then press Enter.

2. When finished copy following code:

tar xzvf foo2zjs.tar.gz press Enter

3. Then again copy following code:

cd foo2zjs press Enter again

4. Next copy the following code:

make press Enter again

5. When finished copykan following code:

./ getweb P1006 press Enter again.

6. Next install the drivers by copying the following code:

sudo make install and press Enter again and enter your password ubuntu.

7. Install additional printer, copy following code:

sudo make install-hotplug and press Enter again.

8. When finished, type exit at the terminal.

9. If the printer is not enabled then please turn on HP Laserjet P1006 printer was, when they are living, then turn off and turn it back to power so that the Ubuntu 9:10 detect new hardware.

10. Will display the image below:

then click install plugin

Next follow the instructions that appear.

After all finished, restart your computer.

Good luck ..

Firewall Builder For Network Security

2009-11-20T17:11:00.005+07:00

Network administrators managing firewalls with policies more complex that is allowed by simple web based UI can simplify management tasks with Firewall Builder.
This programs runs on Linux, Windows, OpenBSD, FreeBSD and Mac OS X and can manage both local and remote firewalls.
Firewall Builder is a GUI firewall configuration and management tool that supports ipfilter, ipfw, iptables (netfilter), pf, Cisco PIX (FWSM, ASA) and Cisco routers extended access lists.

Get Firewall Builder Here :

Firewall Builder For Windows
Firewall Builder For MacOS
Firewall Builder For Other OS

TuxCut Ubuntu Like NetCut Windows

2009-11-20T15:20:00.004+07:00

TuxCut program is running on linux machine, its function like NetCut on windows.
Any different with NetCut?
TuxCut have one feature "Protect Me" and we can changing Mac Address. This feature haven't by NetCut.

Get TuxCut Here :

Download TuxCut rpm
Download TuxCut deb

Wanna trying NetCut, get here :

Netcut Windows

For Anti NetCut, Get Here :

Anti NetCut Windows
Anti NetCut Linux with tar.gz

Learned about SEO for a Few Days

2009-08-21T12:26:00.004+07:00

Sail of Bunaken is memorial's event for Indonesian but Seo is memorial events for search engine. Many publisher made more attention about SEO, but not me, SEO just more word plays. I suggest you if want more traffic make :

1. Quality content
2. Fresh content
3. Knowledge content

It's simpel just 3 step for learn about SEO, it's how as much as you will be post on the web or your blog.

Adsense Notifier

2009-08-15T20:30:00.003+07:00

Adsense notifier is a plugin that displays your adsense earning on the firefox. This plugins just compatible for firefox 1.0 - 3.0. But the security issued is adsense password is saved in a PLAIN TEXT format. Becareful!!
But if you like to use this plugin, get here
Read carefully about review by another user.

Adsense by Search Engine

2009-07-26T11:20:00.005+07:00

Adsense is a advertiser that used by a website to advertising them product with another site. Today, as much as advertiser use adsense by google to advertizing their product. The publisher that affiliate with google may using adsense to promote and get revenue from adsense.
Adsense Type :
- Adsense For Search
- Adsense For Content
- Adsense For Domain
- Adsense For Feed

Above is the sample adsense by google. The each type of adsense is follow the privacy & policy by google.
At the first before to register for adsense you must read the privacy & policy rules.
If the publisher not allow by google privacy & policy so don't publish your adsense, if you still do it, your site will be banned by google. So carefully for adsense.
Many profesional publisher get high revenue from this adsense, use your SEO marketing skill to improve the traffic for your site.

Blog Template

2009-07-24T13:12:00.010+07:00

Many of the templates used by the blogger to enhance its appearance. However, to note not only the look but if its search engine friendly or not? Because not all the templates search engine friendly. This is due to its script xml difficult for the robot crawl to index the site.
Look at this template, so beautiful. But look at the xml code, Is it's search engine friendly? Source : XML Code Here

The Page Rank Calculated

2009-07-23T21:27:00.006+07:00

At this time, the value for a website is the calculates from a PageRank. The higher PR value of a website it will be the better value selling for a website. a lot of website administrators that races increase the value of PageRank.
The name "PageRank" is a trademark of Google, and the PageRank process has been patented (U.S. Patent 6,285,999). However, the patent is assigned to Stanford University and not to Google. Google has exclusive license rights on the patent from Stanford University. The university received 1.8 million shares of Google in exchange for use of the patent; the shares were sold in 2005 for $336 million.
PageRank is a probability distribution used to represent the likelihood that a person randomly clicking on links will arrive at any particular page. PageRank can be calculated for collections of documents of any size. It is assumed in several research papers that the distribution is evenly divided between all documents in the collection at the beginning of the computational process. The PageRank computations require several passes, called "iterations", through the collection to adjust approximate PageRank values to more closely reflect the theoretical true value.

A probability is expressed as a numeric value between 0 and 1. A 0.5 probability is commonly expressed as a "50% chance" of something happening. Hence, a PageRank of 0.5 means there is a 50% chance that a person clicking on a random link will be directed to the document with the 0.5 PageRank.

(Source : Here)

The Competition in SEO

2009-07-23T14:05:00.009+07:00

You might not even enjoy the same positions on Google or Yahoo and another search engines as the toppers do. It happens with sites that are new, sometimes even with sites who were once good on the SERPs but got pulled off due to strange reasons.
Well, it might be difficult to figure out exactly as to why you are not enjoying the same positions on the SERPs despite you having great content than the current toppers, but there’s a nice strategy you can adopt to fix the problem.
Site’s back link sources
Each competition and find out their first 500 backlink sources, and grade those backlinks based on qualities like PR, Alexa, Editorial or not, Homepage or not etc.
Anchor Text influence
Major factor helping the competition would be their anchor text strength. So along with the backlinks sources, I’d also make it a point to find what the anchor texts are. if there are any patterns and preferences.
Find out the most valuable pages linking to them
Page strength for each term
Internal linking structure
And the finally, do more than just search as much as get complete search analytics for your site.(Source :Here)

What is SEO Templates?

2009-07-23T13:36:00.002+07:00

A millions of blogs created with Blogger and hosted on Blogspot. Majority of these blogs use the standard templates provided by Blogger. And there are also many custom designed blog on Blogspot too.
These visually appealing designs and layouts may not be search engine friendly at all. The search engine robots may not be able to figure out what your blog is about and "crawl" beyond your main page.
And there is the duplicate content issue. Say, you configure a monthly archive and for the month of Feb 2007, you've got only one post. The Feb 2007 archive page will look very much like your item post. So you have two different URLs having identical contents and the search engine robots will flag duplicate content spam on your blog.(Source Here)