Body Parts For Cars,parts for cars

Honda city Car Parts

2010-07-18T22:41:00.000-07:00

Get Honda Car Parts in Mumbai,Pune,solapure,kholapure,Aurangabad,Satara,thane with more cites
Honda car showroom prise honda car parts available from this site.

Car Body Repair

2010-07-18T21:46:00.000-07:00

Car Body Repair The best and most accurate way of testing a person`s bodyfat is by Dual X-Ray Absortiometry, also known as DEXA. DEXA is performed by using a whole body scan and two different low dose X-Rays to read bone and soft tissue mass. DEXA is virtually painless and only takes ten to twenty minutes to perform a scan. You can simply call a doctor and schedule an appointment to get tested. DEXA`s should not cost you an arm and leg either, but the price can be somewhat high for someone on a tight budget. One can expect to get one performed for roughly $150.

The second most effective body fat test is by that of fat calipers. These can be annoying since you have to clip them to different areas of your body, but they are fairly accurate for as little as they cost. To get an accurate measurement of your body fat, measure each muscle group, and then use your math skills to determine an average number.

Cheap Hyundai Car Parts in India

2010-07-18T21:37:00.000-07:00

Image via Wikipedia

t is planned to invest another $1 billion in manufacturing more critical components by the year 2001. Equipped with latest technology, machinery, international quality press, body and paint shops all across the world, the company has set more than 70 dealer workshops. The company has incorporated state-of-the-art manufacturing plant near Chennai that tells about some of the most developed production, quality and testing potentials in the country.

According to a company release, the rise in production will help the company increase its export destinations to 95 countries by the end of this year. Apart from offering global technology products, Hyundai Motor also been appreciated with the benchmark ISO 14001 certification for its sustainable environment management practices. To cater with the differing and growing needs of the market, company hopes to increase its presence in the Indian market with coming up new models.

Chevrolet Car Parts

2010-07-18T21:36:00.000-07:00

Image by myoldpostcards via Flickr

The company has made a king like entry in India in the year 1928 with its National Series AB touring. The 171 cubic inches, 24.7hp four cylinder engine of Chevrolet has proved the reliability of this car. First office of Chevrolet was established at Mumbai and its assembly plant was in Sewree. General Motors , the parent company of Chevrolet, was the first in setting up assembly plant in India.

Toyota Car Parts

2010-07-18T21:33:00.000-07:00

Image via Wikipedia

Toyota Motors has been appreciated by many awards. In 1970, it was awarded by Japanese Quality Control Award for being participating in a wide variety of Motor sports. Later in the year 1990, Toyota Motor began to branch out from producing mostly compact cars by adding several larger and luxurious vehicles to its lineup.

In 1997, the company began production of the world's best selling hybrid car, the Toyota. Later in 2002, it has started IMV project, "Innovative International Multi-purpose vehicle" to optimize global manufacturing and supply systems for pickup trucks and multipurpose vehicles.

In the beginning of year 2007, the company has developed as the most profitable automaker and largest seller of cars. Revenue of Toyota Motors in year 2006 is $11 billion along with increasing sales among other countries i.e United States.

Tata Car Parts

2010-07-18T21:32:00.000-07:00

Image via Wikipedia

Tata Motors cars are not the only popular renditions of the legendary car maker. The company's name comes first in many other categories as well. For instance, Tata commercial vehicles have a very dominant presence in the domestic automobile market. Tata passenger vehicles, Tata mid size cars and Tata utility vehicles also have significant market positioning. In fact, Tata Motors is the second largest in the aforesaid segments, and the world's fifth largest in the medium and heavy commercial vehicles segment.Over 3.5 million Tata vehicles including Tata Motors cars are presently plying on Indian roads since 1954. The company's manufacturing plant is located at Jamshedpur, Sanand, Pune and Lucknow. The popular brands of Tata Motors, or to be more specific, the popular Tata Motors cars models in India include Tata Indigo, Tata Indica, Tata Safari and Tata Sumo.

Fiat Car Parts

2010-07-18T21:31:00.000-07:00

Image via Wikipedia

The state-of-art infrastructure of Fiat India Pvt. Ltd. have an installed capacity to produce over 100,000 cars and 200,000 engines besides aggregates and components.

The Strategy of FIAT car world is to build family vehicles on the platform as conceinved for emerging market. This is better known as 178 projects and allows an array of body shapes to serve to the various requirements of the market around the world. The five body styles include a three and five-door hatchback (Palio), a station wagon (Palio Weekend), a three-box saloon (Sienna), a van and a pick-up.

Honda Car Parts

2010-07-18T21:28:00.000-07:00

Image via Wikipedia

All across the world, Hero Honda has achieved indigenisation of over 95 percent. Outstanding Marketing and excellent tactical promotions are the reasons behind their success and establishment. Some specific key features include fuel conservation, safety riding courses and mobile workshops which helped the company to reach in the interiors of the country. Hero Honda Motors Ltd. is well settled in national market, its main attention focused towards overseas due to which exports has seen a steady rise. Sales recorded up till June'08 is around 2,843.53 crore.

Achiever, CBZ, CD Dawn, Karizma, Passion, Pleasure and Splendor are its famous brands on Indian roads. Over the years, the Company has received its share of accolades, including the National Productivity Council's Award ( 1990-91), and the Economic Times - Harvard Business School Association of India Award, against 200 contenders.

Mitsubishi Car Parts

2010-07-18T21:26:00.000-07:00

Image by clundh via Flickr

Mitsubishi Motor , the world's largest company, was established in 1970 with its head office in Tokyo. The company is committed to develop ground-breaking technology that focuses on better control, performance and lifestyle. They manufacture and design attention-grabbing vehicles with real street presence and genuine performance.

As the connection between cars, society and the environment becomes clearer, Mitsubishi stands ready to clear a path to a new era in sustainable partnership. Mitsubishi cars are embodies with two major concepts: "driving pleasure" and "safety". They deliver superior driving performance and superior levels of safety and durability, and as such, those who use them will enjoy peace of mind.

Ford Car Parts

2010-07-18T21:22:00.000-07:00

Image via Wikipedia

Ford Ikon The Ford Motor Company has a rich legacy of translating better motoring ideas to the roads. It has manufactured notable brands such as the Ford, Lincoln, Mercury and the Jaguar. It is among the top five industrial corporations in the world and is available in more than 200 countries around the world. Ford has entered the Indian market through a tie - up with Mahindra motor to manufacture the Ford Escort. Sold to over 18 million owners worldwide, the models available in India are specially engineered for Indian conditions. Ford has sold over 260,000,000 vehicles around the world, and is all geared to make India a global player in automobiles.

With an investment of over Rs. 1700 crores, and in an area encompassing 350 acres, Ford has set up its own new, integrated manufacturing plant at Maraimalai Nagar near Chennai. It has been the endeavor at Mahindra Ford to manufacture India's top quality cars. This is secured through a quality check program based on the principles of NOVA - C (New Overall Vehicle Audit - Customer) wherein daily random checks are conducted from a customer's point of view. To be doubly sure, routine calls are made to dealer check the quality of cars delivered to them.

Audi AG Car Parts

2010-07-18T21:20:00.000-07:00

Image via Wikipedia

Audi AG Car Parts AUDI AG is a German based company with its production units in five major countries viz. China, Hungary, Belgium, Italy and Germany itself. Audi is a manufacturer of exquisite cars which are attractive, sophisticated and technically perfect in every aspects.

The success of Audi AG stems from creativity, commitment and enthusiasm. The company has scattered its wings of success in the field of automobile industry for its technical expertise and creativity.

In the year 2007, Audi has given a total production of 980,880 cars and 1,915,633 engines which shows a growth of 5.9% and 1.4% respectively. This company has a total sale of 1,200, 701 cars in the same year which was again a growth of 5.7%.

Car Electric Fuel Pump

2010-07-18T21:18:00.000-07:00

Image via Wikipedia

Used previously for heavier vehicles, they have only recently become operational in cars. The replacement types usually use a diaphragm arrangement like the mechanical pumps, except that it is actuated by an electrical solenoid. It uses a small turbine wheel driven by a constant speed electric motor. The entire unit is located in the fuel tank and submerged in the fuel itself. When the engine is running the pump pump operates continuously, thus exerting a constant pressure which supplies the maximum fuel demands of the engine. When less fuel is required, the pump does not deliver at full potential, because the turbine is not a positive displacement type like the mechanical pump. Consequently, the turbine will run without pumping fuel and so, needs no means of varying fuel delivery rate like its mechanical counterpart. Since the fuel can flow past the spinning turbine blades, there is no need for pump inlet and outlet valves nor is there any need to vary its speed. A relay for the electric fuel pump is used to complete the circuit to the fuel pump. This cuts off current to the fuel pump in the event of an accident

Car Clutch Plate

2010-07-18T21:15:00.000-07:00

Image via Wikipedia

Car Clutch Plate The clutch plate is a thin, steel, disc whose center is connected to the transmission input shaft by a grooved piece of metal, or hub. The disc is covered with material that is similar to the break linings. This material allows the clutch to slip smoothly and quietly.

CAR Compressor Relay

A capillary tube from a cycling switch lets the switch know what the temperature is in the evaporator. This switch turns the compressor on and off to keep the evaporator temperature at about 32 to 45 degrees F. The relay switch keeps moisture from freezing on the evaporator core.

Calibrated Friction Brake

2010-07-18T21:14:00.000-07:00

Image via Wikipedia

A calibrated friction brake is included in the fuel tank unit. This prevents the wave motions of the fuel from fluctuating the pointer on the dash unit, so that the fuel reading will correctly correspond to the amount of fuel available in the tank. A catalytic converter prevents noxious gases like hydrocarbons, carbon monoxide and nitrogen oxides from polluting the environment by converting them into water vapor and carbon dioxide. The catalytic converter is installed in the exhaust line, between the exhaust manifold and the muffler, and makes use of chemicals that act as a catalyst. The harmful gases enter the catalytic converter, which is a kind of stainless steel container. This is lined with chemicals such as aluminum oxide, platinum and palladium. These chemicals cause the carbon monoxide and hydrocarbons to change into water vapor and carbon dioxide. Some converters have a third lining of chemicals, platinum and rhodium, that reduce nitrogen oxides (three-way, dual bed converter).ClutchThe clutch allows to connect and disconnect the engine and the transmission while starting up and during shifts. Friction plates route the rotation of the engine crankshaft to the gears, and then to the wheels. It takes the rotation up slowly, so that you aren't off to a screeching start. In a manual transmission, the clutch is disengaged when you press the pedal down. The pedal works the thrust pad, and it presses levers in the middle of the clutch cover. Doing all this lifts the pressure plate away from the clutch plate. The flywheel (which is turned by the crankshaft from the tran gets disconnected. When you lift the clutch pedal, springs force the pressure plate and clutch plate against the flywheel. The clutch plate friction linings allow it to slide before becoming engaged. The sliding causes a smooth start instead of a jolt.

Car Rear View Mirror

2010-07-18T21:06:00.000-07:00

Image via Wikipedia

Car Rear View Mirror The rear view mirror is a wide rectangular mirror that you (the driver) use to view anything behind the Car . You don't have to take your eyes off the road to turn your head around. On most cars, the rear view mirror has a "day/night" selection switch that tilts the mirror inside its glass housing without tilting the exterior glass housing itself. The switch tilts the mirror upward, about five degrees, to divert the majority of the light striking the mirror up on to the headliner of the car. The light that you see when the mirror is on the "night" setting is actually bouncing off the glass housing (a good reason to keep it clean). The percentage of light reflected into your eyes in the night position, is very small compared to the amount that would normally be reflected into your eyes in its normal position.
The radiator cap is more than a cap for your radiator; it keeps your engine cool by sealing and pressurizing the coolant inside it. It is designed to hold the coolant in the radiator under a predetermined amount of pressure. If it was not kept under pressure, it would begin to boil, and soon all the coolant would have boiled away. However, the radiator (or pressure) cap prevents this from happening by exerting enough pressure to keep the coolant from boiling. If your cooling system is under too much pressure, it can "blow its top"! To prevent this, the radiator cap has a pressure relief valve. The valve has a preset rating that allows it to take just up to a certain amount of pressure. When you turn the cap on the filler neck of the radiator, you seal the upper and lower sealing surfaces of the filler neck. The pressure relief valve spring is compressed against the lower seal when you lock the cap. The radiator filler neck has an overflow tube right between the two sealing surfaces.

Auto Car Air Conditioner Maintenance

2010-07-18T21:03:00.000-07:00

Image via Wikipedia

We all need Air Conditioners in our cars, but there is a negative side to this too. CFC based refrigerant causes terrible damage to the ozone layer. Our mechanics will have to make sure that there are no leaks, and fix them if there are, before they can add any R-12 to our air conditioning systems. Naturally, this cost will be passed along to us. Recovered refrigerant will be recycled. Capturing refrigerants and restoring them for reuse is not only environmentally sound, but mechanically safe. Each molecule of CFC in the atmosphere has a 120 year life that will destroy tens of thousands of ozone molecules. This means that a CFC molecule released in 1991 will still be damaging the ozone layer in 2100.

The air ducts control the passage of hot or cold air into the interior of the car. They are operated by a control on the dash, either manually or automatically.

The air pump pump air into the exhaust manifold and in a few cases to the catalytic converter. The oxygen in the pressurized air helps to burn quite a bit of any unburned hydrocarbons (fuel) and thereby converts the poisonous carbon monoxide into good old carbon dioxide. A belt from the engine drives the air pump. It has little vanes (thin, flat, curved fins) that draw the air into the compression chamber.

Read More Information

Cheap Auto Parts

2010-07-18T20:54:00.000-07:00

Image via Wikipedia

Ever wondered what goes in your vehicle?To those who know and those who don’t, this section gives an illustrative idea about the parts and components that make a vehicle move.
A small car has as many as 3000 different components, each of which designed separately to work in perfect coherence with each other. Sounds complicated? Yet interesting!

Let us peep into the ‘black box’ and learn a little more than we already know about our favorite vehicle. A vehicle can broadly be seen as comprising of four main sections-

The engine
Vehicle Frame
Covering body (including interiors in case of four wheelers)
Suspension, brakes & wheels

These sections are further made of millions of small and big components. Thanks to the fact, the auto parts and components industry is a big industry in itself, and is considered separate from Auto industry in economic studies and various other practical purposes.