Dallas Fence Company | Budget Fence N Deck - (972) 537-7766

Dallas Custom Automatic Wrought Iron Gates - Service Calls - Preventative Maintenance Agreements

2014-09-03T23:58:00.001-05:00

Budget Fence N Deck offers sales, maintenance, free estimates, installs, new install and remodels. Emergency service and 24/7 service. Ornamental iron, structural steal, pipe welding, cattle guards and oil field equipment. Rig maintenance and welding fabrication.

Our staff: Certified welders AWS , ASME and NCCR certified. technical and mechanical Engineers. 20+ years of experience.

Repair

Service

maintenance

Install

Fence Install & Repair

Operator Rebuild

Card Readers

Keypads

Exit an Safety Loops

Toll Tag Readers

Phone Entry Systems

Maintenance Contracts

Certified welders with mobile welding equipment for most gate repairs.

Access cards and transmitters for gate entry systems

Evaluation of your system's safety

Full system diagnostic evaluations

Monthly, quarterly, Yearly check-ups.

Service calls-
We cover residential and commercial. 6 month and 1 year preventive maintenance which includes

lube

greasing

diagnostic check

limit adjustments

bolt tightening

check chain, post mounts, operator stands and functioning of gate.

Check safety devices, loop detections and many other safety and city code features to make sure in compliance.

We guarantee warranty compliance and insure all property's are up to code and in properly functional state.

Service contracts -
Are more for commercial based contacts in which services are conducted many things are covered such as:

service calls

parts

misc. functions like motor controls, new chains, broken welds or damaged property with in reason under contract agreement.

Insurance is provided with service contract and can save owner hundreds in long run.

Typical Customers we service.
Apartment Complexes
Military
Oil Companies
Car Lots
Parking Garages
Architects
Contractors
Developers
Fence Contractors
Public Works
Utility Companies
Homeowners
Military back ground and we offer 10% discount to ALL military personnel.

https://www.dropbox.com/sh/utouh5sdcpmfa7g/AAByij8KEGKjHbTwtTHoPwGYa?dl=0

2014-06-06T14:58:00.003-05:00

Frisco Fence Company – Budget Fence N Deck

Budget Fence N Deck has been building fences and decks in Frisco Texas since our origin.

We have built a strong relationship with the best suppliers from the Dallas – Fort Worth metroplex so that we can deliver you a great product at an affordable price. Our quality and service is top notch as we inspect each project we perform for our customers. Our crews are very knowledgeable and experienced in the fence and building and carpentry so we often do not have to return to make any corrections.

To see our work and more frisco fencing visit us online at http://www.budgetfencendeck.com/friscofence.html

Dallas Fence Pictures - Budget Fence N Deck

2014-04-30T20:46:00.004-05:00

What Qualities Should a Good Fence Contractor Have?

2014-04-30T20:04:00.000-05:00

What Qualities Should a Good Fence Contractor Have?

What Should I Look for in a Residential Fence Contractor?

A fence contractor is a person of a company of trained professionals specialized in installation, maintenance and repair of a wide variety of fences. Naturally, if you’ve been living in an apartment your entire life, you are very likely to not know anything about fences. That’s why most new homeowners need to know about some of the services that a good residential fence contractor can provide for them. If you have a house or any other property that could use a good fence or a deck, this is what you need to know about fence contractors:

First of all, no two fence contractors are the same. Their services depend on a lot of things – experience, training, skills, quality of their equipment, and so on. That’s why some contractors can offer to build you a wooden deck with a staircase and a sturdy wooden fence, while others can only provide you with chain link fencing. What you need to do is inspect the services of more than one residential fence contractor before hiring anyone.
Once you know what they can provide for you, it’s time to decide what you want and start looking for it. For example, if you’re looking for a good fence for a residential property, then you can choose from a wide variety of materials and styles — from the simplest and most affordable fences up to the most luxurious metal or wooden fences and decks.
A good residential fence contractor should be able to work with all sorts of materials. That includes metal, wrought iron, wood, vinyl, aluminum, chain link, barbed wire, and electric fences. If the contractor you like is capable enough to provide you with such a variety of services, then why not give them a try?
If you want to make sure they are good enough, simply check out their website for picture galleries and references. If you like their style and quality of work, give them a call!

If you ever need the services of a reputable local fencing company, then why not give Budget Fence n Deck a try? We are available for appointments anywhere on the territory of Dallas TX. Call us for an appointment at (972) 537-7766!

What Can a Fence Contractor Do for Me?

2014-04-30T20:02:00.002-05:00

What Can a Fence Contractor Do for Me?

Advantages of Calling a Fence Installation Service Provider

One of the best ways to protect your belongings is by putting them in a safe place and surrounding that place with a good fence. People have used fences since the dawn of time for protection from the surrounding environment. Walls and fences have been a part of our development from the beginning. Nowadays, a good fence can protect from a lot of threats.

For example, a client of ours called us for a quick fence installation service after his home got burglarized. The first thing we noticed was that he didn’t have a fence. He looked through our fences, and picked the safest option. He hasn’t had problems ever since. That’s one of the reasons why we recommend that our customers put up a fence. It doesn’t always have to be big and strong. The psychological effect is enough to discourage potential wrongdoers.

Besides warding off people who might want to harm you or your property, a good fence can keep various pests and vermin away. Also, it helps protect your yard and garden from weed infestations. Both weeds and vermin can cost you a lot of money in gardening and exterminator services. So, one of the things that a good fence contractor can provide you with is a wide variety of fencing options.

If you don’t need a new fence, then perhaps you can benefit from some maintenance and repair services. This is what fence contractors do most of the time. A good repair and fence installation service provider can handle any sort of fence. So, if your wooden fence is starting to rot and is in need of emergency care, then this is the kind of contractor you should be looking for.

All in all, a good fencing contractor can help you maintain all sorts of fences and decks. You can count on them for performing a quality fence installation service too. If this is something that your home might need, then why not give us a call? We are experienced professionals capable of providing high quality fencing services at affordable rates. We are available for hire to the entire community in Dallas TX.

So, if you’re located anywhere in the area, check out our website, and give Budget Fence n Deck a call at (972) 537-7766!

How to Maintain a Wooden Fence

2014-04-30T20:01:00.000-05:00

How to Maintain a Wooden Fence

What Kind of Wood Fence Repairs Do I Need to Perform to Keep My Fence Sturdy?

Wood is a natural material that is very susceptible to the influence of the weather and all sorts of other natural phenomena. Most harmful to a wooden fence are mildew and algae. Moss and algae usually grow in shaded locations with excessive moisture. As a contractor who offers quality wood fence repairs, we know what it takes to keep your fence safe and sturdy.

If your fence is suffering from excessive moisture, mold and algae, here is what you need to do:

The first thing you need to do is prepare the yard for the procedure. If your fence is surrounded with flower beds and shrubs, then the first thing you have to figure out is how to keep them safe. Tie the bushes together, and cover them with a tarp.
Once you’ve got the garden prepared, it’s time to decide how you’re going to clean the algae off your fence. This sort of wood fence repairs can be performed using two different techniques. You can either scrub the fence manually or rent a power washer.
If you choose to use a power washer, set the pressure somewhere between 1500 and 2000 psi. Stand back, and hose the fence down. On the other hand, if you choose to do that manually, you need to grab a sturdy brush, and mix a bucket of cleaning solution. The mixture should contain warm water, bleach and some liquid hand soap.
Once the fence has been thoroughly washed, it’s time to let it dry in the sunshine. If the stains remain, you can either wash them down with the aforementioned solution or sand them down.
When you are done with all of that, you have to seal the wood against further damage. Don’t forget to fix any other problems the fence might have. If the nails have started to pop up, hammer them down before you cover them with paint, wax, or some other sealant.

If you don’t have the time or the know-how to perform wood fence repairs on your own, then stop putting them off for later, and hire a contractor! If you are located in Dallas TX, you can simply call Budget Fence n Deck and have it done in a matter of hours. For quality fencing services, call us at (972) 537-7766!

Top 10 Fencing F.A.Q.

2014-04-30T20:00:00.000-05:00

Top 10 Fencing F.A.Q.

10 Questions You Never Got to Ask Your Fence Staining and Sealing Company

As a fencing contractor with plenty of experience, we have installed, repaired and replaced all sorts of fences. During that time, we have had to answer plenty of questions from our clients. So, in order to make it easier for you, we have decided to answer some of these questions online:

What types of fencing are there? What are my options?

There are many fencing materials you can use including metal, wood, vinyl, and so on. They come in a wide variety of fencing designs for different purposes. For example, commercial and industrial property fences are a lot different than residential ones. For further details, consult with a fence contractor. They can provide you with all sorts of services ranging from installation to fence staining and sealing.

How can I be sure if my new fence is going to last?

Well, if you are worried that the wind might blow your fence away, then this problem can be easily solved. All you need is a good concrete foundation for the fence posts, and your fence won’t be going anywhere. Other wind resistant options include metal mesh fences. In that case, the wind passes through the mesh with minimal resistance. So, unless the fence is covered, there should be no problems.

Which is the most durable fencing option?

Again, the answer to this question depends on the purpose of the fence. Wooden fences look amazing, and with regular fence staining and sealing, they can be pretty long-lasting. Metal fences are also pretty durable, especially if they are sealed or have some stain resistance. Usually, when picking a metal fence, you are choosing between cheap, bad-looking mesh fences and good-looking iron fences that tend to be more expensive. Naturally, quality fences cost more, so if you want durability, then we recommend you choose a solid metal one.

Do I do the landscaping before setting the fences, or the other way around?

Well, if you do the landscape first, you may need to dig around it for fence posts which could potentially make the landscape look bad. On the other hand, if you put the fence posts first, it will not make your yard harder to landscape. That’s why we advise you put the fencing first.

Stay with us for part 2 of the most frequently asked questions about fencing. If you ever need a good fence contractor or any fence staining and sealing services, give Budget Fence n Deck of Dallas TX a call at (972) 537-7766!

Top 10 Fencing F.A.Q. PART – 2

2014-04-30T19:58:00.000-05:00

Top 10 Fencing F.A.Q. PART – 2

10 Things You Always Wanted to Ask Your Fence Contractor

Welcome back! In our last article we tried to answer some of the most frequently asked question people have for us. We couldn’t fit all of them in a single article, so here are the rest of them:

How do I maintain and care for my fence?

Not all fences need maintenance. Wooden ones, however, need to be maintained. To do that, grab a pressure cleaner, and wash it down. Also, you will need to seal and coat your fence once a year. It is necessary for protecting the wood from the influence of the elements. The same goes for metal fences that are susceptible to rust. They must be coated at all times, which can be a problem if you have a very high fence

How tall can I build my fence?

Well, it depends on a lot of things. For starters, it depends on the city regulations. If the municipality doesn’t allow fences higher than 8′ then that’s as far as you can legally go. Also, it depends on the materials that are used and the type of fence. Usually, the taller it gets, the deeper the foundations must be.

How deep must the fence posts go?

As a fence contractor, we usually dig holes about 42″- 48″ deep. We lay a concrete foundation around the post and cover the rest with dirt. Depending on the height of the fence, the posts may need to be buried even deeper.

Do I need a permit for a fence or a deck?

Most of the times, when building a deck on your home, you will be required to have a permit. So, before you start building anything, you should consult with a fence contractor or the local permit office.

How can I get a permit?

You will be required to present a copy of your property plan. It should include a precise drawing of the house and the property lines around it. You may also be required to present a drawing of the fence that you’re planning to install. It has to be precise as well.

Can I avoid dealing with government officials and paperwork?

If you want to avoid dealing with government institutions and paperwork, you can do that, but not by building a fence illegally. Simply contact a good fence contractor, and have their company deal with the building regulations. If you don’t know any reliable companies in Dallas TX, then why not give Budget Fence n Deck a try? Reach us for an appointment at (972) 537-7766!

Tips for Proper Deck Maintenance

2014-04-30T19:57:00.000-05:00

Tips for Proper Deck Maintenance

How to Make Your Deck Last Longer, According to a Local Deck Contractor

As a deck contractor, we’ve worked on a lot of different decks and patios. We’ve installed and maintained all sorts of decks, and have a couple of maintenance tips for all of our customers. If you want your deck to last longer, you need to perform a couple of procedures throughout the year. Here is what we can tell you about that:

first of all, you need to remember what your deck is made of wood and treat the material accordingly. The highest quality of decks are usually made of moisture resistant types of wood. However, like everything made of wood, a deck needs maintenance. The fastest way to keep it clean is by washing it with a pressure washer. It is extremely efficient against dirt, grime and debris. This should be done regularly during the active season.

Once in a while, you need to inspect your deck for problems and signs of deterioration. Popping nail heads are one of the most common signs of deterioration you can notice. Simply hammer them down, and if the problem seems too serious, fix it or call a deck contractor. If the nails are too loose, take them out, and replace them with screws.

At the beginning of summer, it is highly recommended that you stain and seal your deck. It will take a lot of wear and severe weather changes over the coming summer, so it would be better if you were to seal it against such damage. Pressure-treated lumber is resistant against insects and decay. However, it is still pretty vulnerable to moisture and sun light. That’s why sealing the lumber against fading is very important.

The middle of autumn is the right time for inspecting your deck and preparing it for the coming cold season. It could suffer from excess moisture and rotting, so make sure it’s properly cleaned, sealed and ready for winter. If you don’t know much about decks and their maintenance, consult with a deck contractor.

That’s pretty much all of the attention that a deck needs. If you need help with the maintenance, then perhaps Budget Fence n Deck could be of assistance. We operate on the territory of Dallas TX, so don’t hesitate to reach us at (972) 537-7766!

What You Need to Know about Fencing, According to a Fence and Deck Repair Contractor

2014-04-30T19:55:00.000-05:00

What You Need to Know about Fencing, According to a Fence and Deck Repair Contractor

There are several stages or steps that you need to take or go through before you start building the actual fence. As a fence and deck repair contractor, here is what we can recommend you do:

In order to make sure that your fencing project is going to be a success, you need to check the local restrictions. You have to make sure that your fence is not illegal before you build it. If there are any restrictions on fences in your city or neighborhood, you should take them into consideration. So, our advice is to check with your local planning department before you start the project.
Building in most cities requires a permit. Making a fence is not an exception. This is important because a lot of plumbing, gas and sewer lines are buried at the same depth as you would need for a fence. When you apply for a permit, the authorities will check and let you know about any areas that aren’t safe to dig in.
Next, you will have to choose between various fencing materials. There are a lot of options, so we recommend you consult with a fence and deck repair contractor before you make your final choice. Wood is always a good choice. The problem is, it takes maintenance. A good wooden fence can last up to 20 years with proper care.
Depending on the chosen material, you will have to pick an appropriate style for your fence. Before you start, we suggest you do some research. The list of styles you should look up includes lattice, picket, convex, concave, board on board, shadowbox, privacy, and many other styles of fencing. Every one of them has its own purpose, so check them out!
Last, but not least, you will have to decide on how to realize your project. You can try on your own or with the assistance of a fence and deck repair contractor. If you are not confident in your skills and expertise, simply call Budget Fence n Deck of Dallas TX! We are experienced professionals capable of handling anything that you may ask of us. Reach us at (972) 537-7766!

What questions do I need to ask during a fence estimate?

2014-04-30T19:42:00.001-05:00

What questions should I ask during a fence estimate?

by Craig Fenderson

I have been doing sales, installation and repairs of fencing in the Dallas - Fort Worth metroplex since 1999. When performing estimates I have come across many different types and styles of fences with many different situations surrounding the best way to get the job done. Most customers will get 3 estimates from different fence companies serving their area. There are times when they call and either they do not get an answer or when they do leave a message they do not get a call back. My experience on this is either the fence company is either too busy or when you described your job details it is either something they do not do or do not want to do. So this may be your first indication of what you are looking for when choosing the right company. Make sure the company can perform the job at hand and that they are interested in doing the job. Below are a list of questions that I think are important for you to ask when dealing with a dallas fence contractor.

Board on Board Cedar Fence

1. Do they do the type of work you are describing? If this is their first time they may not have the experience and you could run into problems.

2. Are they insured? Insurance can be obtained for as little as $100 per month. If the company cannot afford insurance they may be working paycheck to paycheck or are not charging properly on jobs to maintain their coverage.

3. Do they perform a digg tess to check utilities prior to digging? This is a free service from Texas 811. The contractor will call in and setup an appointment to have the utilities flagged prior to excavation.

4. What type of materials will they be using. There are different types of wood from whitewood or spruce to pressure treated pine to cedar. Also there are different grades of cedar. The most commonly used in Dallas is a number 2 grade. Number 1 has very few knots, Clear is well, clear of knots and number 3 is the most inexpensive, but it looks pretty rough. Number 2 has a few knots but is a good looking board and is the most popular and overall the best choice for your money. Also be aware of they types of posts being used. There are landscape timbers, 4x4 pressure treated and metal. Metal of course is the best. Stay away from timbers or lst's if you can. They only tend to last about a year or so. Rails come in 2x3 or 2x4 sizes and are available in whitewood, treated and cedar. Cedar can be rough or smooth. Price is the main concern when dealing with rails. Treated and cedar are both good choices, treated can warp over time however and cedar is quite pricey.

5. How deep are the posts set and how far apart? At minimum the posts should be set 2' on a 6 foot fence and 8' spacing from post to post. When using a kick-board go 6" deeper. Its best to go 3' deep. On an 8' fence space the fence at a minimum of 6' from post to post and on gates use double posts so that the gates do not sag from the weight

6. How is payment to be made? Most fence contractors take 50% down and 50% when the job is done. This allows the contractor to be able to purchase the materials to get the job done. If they pay for materials and are running multiple jobs at the same time they may not be able to afford to get your job done in a timely manner as they are waiting on cash from another job. Of course there is a risk that if you don't check them out they have been known not to do the job after payment. This works both ways, not all customers pay either. There is a level of honesty on both parties.

7. When can they start the job and how long will it take to complete? Typically there are tasks that must be completed prior to starting the job. For example, contacting the crews, calling Digg Tess, acquiring permits, then there is other factors like weather, illness, equipment failure, time to finish previously scheduled jobs, etc. You may have to allow a for up to a week for permitting and another week or so for other jobs to clear out of the queue.

8. Who acquires the permit? Many fence contractors acquire the permit and it is a benefit for the costumer if the contractor does it as it takes time out of your day and can be a hassle if you don't know what you re doing. Ultimately it is the homeowners responsibility.

There may be other questions that pertain to your particular job, but these are some of the more common ones ive run across throughout the years. Feel free to contact us at the information below if you have any questions or concerns.

For additional information regarding your fence, deck or arbor installation, repair or staining, please contact Budget Fence N Deck at (972) 537-7766(972) 537-7766 or visit us online at www.budgetfencendeck.com

Precast Concrete Fence Installer Texas

2014-04-30T17:01:00.000-05:00

Budget Fence N Deck is an authorized sales and installation company for EasyCrete precast concrete fencing.

EasyCrete's line of precast concrete fencing and wall systems are used as perimeter walls, sound barriers, screening walls, equestrian fencing and as an attractive retaining wall solution. Our products are repeatedly specified by architects and engineers for a variety of projects for large and small residential and commercial developers, city and state government agencies, parks and recreational facilities, community associations and individual homeowners.

Check out our video.

Budget Fence N Deck acquires New General Manager for New Year 2014

2013-12-24T14:21:00.001-06:00

Budget Fence N Deck acquires

New General Manager for New Year 2014

Back in November 2013, Budget Fence N Deck hired David Bush as the companies new General Manager.

David Bush was the owner and operator of David Bush Custom Homes. He was a general contractor in Cedar Hill, TX and was rated in the top 30% of 39,298 contractors in Dallas.

With David at the helm we are expecting to be able to turn up our sales volume and efficiently be able to manage and produce a higher level of quality and service for our customers.

Budget Fence N Deck has made much progress since its inception back in March of 2009 and is expecting its best year to date in 2014.

We are currently offering these services:

Fence Installation

Chain Link Fencing

Wrought Iron Fencing

Fence Repairs

Automatic Driveway Electric Gates

Decks

Arbors

Pergolas

Patio Covers

Concrete Patios

Retaining Walls

Fence Staining and Sealing

Residential and Commercial Painting

Garage Epoxy Floors

Radiant Barrier

Partnerships:

Concrete Fencing- www.EasyCreteUSA.com
New Home Builder - www.preferredhomebuildersdallas.com
Christmas Lights - www.holidaysparkles.com

Dallas Fence - Budget Fence N Deck - Dallas Fence Company - Dallas Fence Repair

2013-12-24T13:13:00.001-06:00

Budget Fence N Deck Video

Finally, a company that offers quality service at a price that wont break the bank. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Dallas Fence Companies | Budget Fence N Deck | Fence Companies Dallas TX

2013-02-11T23:30:00.001-06:00

Dallas Fence Repair Dallas Fence Staining

2013-02-11T22:12:00.000-06:00

Budget Fence N Deck is gearing up for 2013. We would like to thank the Dallas - Fort Worth metroplex for choosing us for all your fencing needs. Please visit us online at http://www.dallasfencecompanies.net to view the services we offer as well as a portfolio of our work.

Services offered:

Fence Installation

Concrete Fencing

Chain Link Fencing

Wrought Iron Fencing

Fence Repairs

Automatic Driveway Electric Gates

Decks / Arbors

Pergolas / Patio Covers

Concrete Patios

Wood Retaining Walls

Fence Staining and Sealing

Painting

Garage Epoxy Floors

Radiant Barrier

Dallas Fence Company - Budget Fence N Deck

2012-07-02T23:34:00.002-05:00

Welcome to Budget Fence N Deck

Visit our website at: www.budgetfencendeck.com

( 972) 537-7766

Finally, a company that offers quality service at a price that wont break the bank. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Did our competition give you an estimate your'e not happy with? Email or fax it to us and tell us where you need to be.

"Craig Fenderson and his crew are one of the most professional contractors I have ever dealt with. Their price and quality craftsmanship is second to none. Our price quote was 400-600 dollars less than their competition. I purchased a retirement property for my mother, and had many specific request that went above and beyond. The work that was done on my fence and deck addition was -unparallel, and more than I could have imagined. I would highly recommend this company to my family and friends."

Thanks again, Ron Welty

"Thanks for making my new fence experience so painless! My fence looks great! I am so pleased with the quality and workmanship. The crew was fast, friendly and efficient. I couldn't be more happy with the results."

Betsy Roe

"I have a great fence guy! His pricing is reasonable and he promised to have it torn down, rebuilt and the old fence carried off in 2 days. He started and completed the job one day! The crew was very nice, friendly and you could tell customer service was foremost. Craig (owner) was very responsive to all my questions and very available. He also does holiday light install and take-down for $350 - $399 (including lights). I'm very pleased! "

Marci Byler

"Your fencing skills are top notch!. Thanks for a wonderful job! We look forward to the soon to be painted house!"

Amy & Renee

Serving Dallas/Ft. Worth
(972) 537-7766

The Costs of Building Privacy Fences

2012-03-27T17:42:00.000-05:00

The Costs of Building Privacy Fences

Privacy fence costs depend on several factors.

If you are adding a privacy fence to your property, check local building codes before you begin the project to ensure all requirements are met in the planning process. Once you know your local building codes, set a budget and evaluate your fencing needs. The total cost of your project depends on the type of materials you use, as well as the size of the fence and whether you plan to install it yourself.

Wood Fences
- Wood privacy fences cost about $9 per foot for a 4-foot fence, or $15 per foot for a 6-foot fence. It is an ideal fencing material, due to its sturdiness and ability to keep out prying eyes. Wood fence posts that come into contact with the ground may rot, so use a rot-resistant material like metal for fence posts if you are concerned about rot problems. As noted by the Home Depot, wood used for fencing is rated according to its appearance. The highest rating is "Clear," followed by "Premium," "Select," "Standard" and "Quality."
Vinyl Fences
- Vinyl fencing is much more expensive than other options, but its durability and low maintenance make it cost effective in the long term. According to Service Magic, a vinyl fence costs about $20 per foot. Cost Helper estimates that a 100-foot professionally installed vinyl privacy fence with a gate may cost anywhere from $1,600 to $7,500, depending on the height of the fence, quality of materials and complexity of installation. Some vinyl fences come with all the materials for a do-it-yourself installation, which saves money on installation costs.
- Sponsored Links
  
  Bollard Posts - Buy Cheap
  15 Models. Ready to Ship Today! 35+ Locations. Nationwide Shipping
  www.hippoindustries.com
Other Options
- Stone, brick and concrete are a few other materials for privacy fences. They provide maximum security and protection from wind, pests and rot. According to the Home Depot, concrete is the most affordable of the three, although high upfront costs are balanced by low maintenance and durability. The Masonry Advisory Council estimates that a fence made with concrete block will cost about $8 per square foot, whereas a stone fence costs around $45 or more per square foot.
Additional Factors
- In addition to material and installation costs, you need to consider a few additional factors when budgeting for a new privacy fence. If your yard has a steep slope or any obstacles that will need to be worked around, costs may be a bit higher. Gates and ornamentation will also increase the bill. Don't forget any additional costs for tools and equipment if you plan to do the job yourself. For example, a hole digger or auger for fence posts can cost anywhere from $15 to $110 for a manual product or $60 to $600 for a power auger.

How to Build a Solid Metal Privacy Fenc

2012-03-27T17:40:00.001-05:00

How to Build a Solid Metal Privacy Fence

Create solid metal privacy fences with a few corrugated metal panels.

When the time comes for building a new fence that offers privacy and longevity, a solid metal privacy fence is the perfect fit. Using inexpensive corrugated metal for the fence allows you to size the fence as needed, affording you the opportunity to surround your property without overspending in the process. The corrugated panels are simple enough to construct that no specialized training is required, and are made to last for years even in extreme weather conditions. With an added wooden frame around the panels, the sharp panel edges are concealed and the fence looks acceptable enough for even residential use.

How to Clean a Privacy Fence
How to Build a Mesh Fence
e

Laser level
Landscaping paint
Tape measure

Show (17) More

Set up a laser level along the fence line. Use the laser serve as a guide for marking the fence line onto the ground with landscaping paint. Measure the length of the painted line with a tape measure. Divide the length by 4 feet and round the result up to determine the number of metal panels needed for the line. Purchase two or three extra panels in case of installation difficulties

- 2
  
  Make marks along the fence line every 4 feet for the placement of the supporting fence posts.
- Sponsored Links
  
  Online MBA University
  Get your MBA with a reputable online school—Request info now!
  www.Post.edu
- 3
  
  Check with a building inspector to find out how deep you need to place the fence posts in your area. Generally, posts are placed so that the base extends below the frost line for the area to prevent heaves from occurring during winter months.
- 4
  
  Dig a post hole using a post hole digger at each of the marked locations to the recommended depth plus 6 inches to allow for a layer of gravel. Make your holes 6 inches in diameter.
- 5
  
  Fill the base of the hole with a 6-inch layer of gravel to assist in drainage.
- 6
  
  Fill the post hole about 3/4 full with the quick-set concrete. Mix the concrete in a wheelbarrow at the fence line, using a spade to incorporate the water into the mixture and to shovel the concrete into the post hole.
- 7
  
  Place the post into the hole and make any adjustments to position it so that it’s plumb. Use posts that are 8 feet long plus the depth of your post hole above the layer of gravel. You can check that its level vertically using a carpenter’s level placed against the pole’s side.
- 8
  
  Fill the rest of the hole with concrete, overflowing it slightly by about 1 inch. Slope this last inch downward and away from the post body to help with water flow away from the post.
- 9
  
  Brace the posts into place by tying three strings around the post and then extending the strings to three sides with equal space between them. Attach the other ends of the strings to wooden stakes and drive the stakes into the ground to hold the posts in position. Wait about 4 hours for the concrete to cure around the base of the posts.
- 10
  
  Cut frames for the corrugated panels using 2-by-4-inch planks. Cut two of the planks to match the panel length and two to match the width. Use a 45-degree mitered cut from the outside edge of the plank to the inside so that they fit around the edge of the corrugated panel like a frame.
- 11
  
  Cut a groove in the center of the planks with a router, making the grooves 1/2-inch deep and as wide as the depth of the side of the panel that you’re attaching the plank onto.
- 12
  
  Paint the planks with an exterior latex paint the color desired using a paintbrush. Paint a layer of galvanized paint onto the metal panels to give them a layer of protection against the weather. Allow the paint 6 hours drying time.
- 13
  
  Place the frame pieces around the panels and secure them in place with galvanized screws through the wood and into the corrugated panels.
- 14
  
  Place the framed panels against the posts and screw them into place with the galvanized screws.

Dallas Fence Repair

Dallas Fence

Dallas Fence Companies

How to Build a Privacy Fence With Metal Poles

2012-03-27T17:38:00.000-05:00

How to Build a Privacy Fence With Metal Poles
By Michael Davidson, eHow Contributor | updated December 28, 2011
How to Build a Privacy Fence With Metal Poles thumbnail
An effective privacy fence prevents neighbors from seeing inside your yard.

A privacy fence is more concerned with limiting outside viewing of your home or yard then it is with security. As a result, you can use lighter materials like bamboo, or use traditional wood, vinyl or metal. Metal poles help anchor your fence so it remains strong against wind and other extreme weather conditions. Without proper support, your fence falls down or flies away before you can properly enjoy it.
Other People Are Reading

How to Build a Mesh Fence
How to Build a Wood Fence with Metal Poles

Print this article

Things You'll Need

Wooden stakes
Hammer
Tape measure

Show (4) More
Instructions

1

Call your utilities company to verify there aren't any utility lines under the area where you want the fence to go. This prevents a possible breach of a gas line or sewer pipe. Acquire any permits required in your state before installing your fence and make sure the fence is within your property lines.
2

Mark the location of the first post with a wooden stake by hammering it a few inches into the ground. This functions as a marker.

Sponsored Links
Steel Bollards

All Schedules, Sizes & Styles Low Price, Quick Quote & Turnaround
www.godawn.com/steel-bollards.asp
3

Measure down another 3 or 4 feet from the first stake with a tape measure and add another one. The more metal posts you use, the more stable your fence will be. If you want fewer posts, separate them no more than 8 feet apart -- any further and the posts won't provide adequate support.
4

Dig 3-foot deep holes where each stake is located using a shovel or a post hole digger. Most privacy fences are at least 6 feet tall and the posts require a 3-foot depth in the soil to adequately support the fence.
5

Place the posts in the holes. Add gravel equally on all sides to hold the posts straight. The gravel should at least fill the holes halfway.
6

Pour concrete mix into the holes to fill them. Leave about 3 inches of space at the top and wait for the concrete to fully dry. Keep the pole in the center of the hole so it doesn't lean once the concrete dries. The gravel should keep the pole in place but correct the pole manually and hold it upright as the concrete starts to dry if you notice it leaning.
7

Fill in the holes with dirt to hide the gravel and concrete underneath. The privacy fence can then be drilled into the posts using brackets, depending on what material you use. Bamboo often gets secured with construction wire.

http://www.budgetfencendeck.com

Dallas Fence Repair

Dallas Fence

Dallas Fence Companies

How to Build a Strong Privacy Fence for a High Wind Area

2012-03-27T17:35:00.001-05:00

How to Build a Strong Privacy Fence for a High Wind Area
By Tom Ross, eHow Contributor | updated January 04, 2012
How to Build a Strong Privacy Fence for a High Wind Area thumbnail
Wind resistant fences are constructed using extra measures to make them stronger.

Extra steps are necessary when installing a 6 foot tall wind-resistant privacy fence as opposed to installing a fence in an area with mild winds. The broad flat surface of a closed plank privacy fence bears the full brunt of strong, prevailing winds. According to Purdue University, "When wind increases from 10 to 30 miles per hour, the force on a solid fence increases nine times." Special skills or tools are not necessary to build a strong fence. More materials are required because the fence posts are spaced closer together, sunk deeper and braced with additional girts, or crossbeams.

Instructions

Strong Fence Frame
1

Mark the fence line by driving wood stakes at the beginning and end, drawing a cord tautly between them.
2

Make a mark with white sand on the ground at the start of the fence line and every 6 feet along its length. Make another mark at the end of the fence line.

Sponsored Links
Does Your Website "Work"?

Grade Your Website in 30 Seconds. Try the Free SEO Grader Now!
www.diyseo.com
3

Dig holes with a posthole digger at each mark that are 3 ½ feet deep and 10 inches in diameter.
4

Put a fence pole into the middle of the first hole and fill it in with quick-set cement, mixed according to the directions on the bag. Lay a carpenter’s level against the side of the fence pole and adjust it so that it is level and in plumb. Brace the post in position and allow the cement to set up overnight.
5

Repeat the process of setting a fence pole at each mark you made along the fence line.
6

Measure a distance of 8 inches up from the bottom of each fence post and use a marker to draw a line on the post.
7

Put a 2-by-8-inch-by-6-foot girt or cross-brace between the upright fence posts with its lower edge resting on the 8-inch mark you previously measured. Use 3-inch deck screws to attach the girt to the fence posts.
8

Continue down the fence line, cutting each girt with a saw to fit as necessary, and screwing them end to end with the previous girt onto the upright fence post.
9

Start again at the top of the upright fence posts and measure 8 inches down from the top. Rest the bottom edge of a girt resting on top of the mark and screw it into the post. Repeat the process of attaching each girt to the top of the upright fence posts.
10

Measure the distance on each fence post that is midway between the upper and lower girt. Mark the spot and install another row of girts.
Install Fence Planks
11

Begin at the first upright fence post and put a plank straight up against the three rows of girts. Use the carpenter’s level to ensure the first plank is level and in plumb.
12

Drive three 2-inch deck screws through the plank into each girt. Arrange the screws in a straight line, evenly spaced, up and down.
13

Put another fence plank adjacent to the first one and attach it to the girts. Continue until all of the planks have been installed on the fence.

Dallas Fence Repair

Dallas Fence

Dallas Fence Companies

Dallas Fence Companies | Budget Fence N Deck | Dallas Fence Installer Contractor Builder Decks Arbors

2011-01-17T23:55:00.000-06:00

Budget Fence N Deck

(972) 537-7766

Budget Fence N Deck offers a 10 year workmanship guarantee new fence construction.
Budget Fence N Deck is fully insured.
Budget Fence N Deck is accredited with the BBB.
Budget Fence N Deck uses quality materials and experienced labor.
Budget Fence N Deck has one of the best warranties in the industry: 10 Years workmanship on every new fence.
Budget Fence N Deck has a price match guarantee on valid competetive bids provided that you provide a written estimate.
Product Quality
Posts installed 30" - 36" deep on both 6' and 8' fences
Galvanized metal posts are provided
Galvanized ring shank nails
Posts are set in concrete

Featured Services
Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining Walls
Fence Staining and Sealing
Painting
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation

Budget Fence N Deck Warranties
Provided below is a list of our warranties that will be included with your purchase unless otherwise stated on the service agreement. No warranties are provided on labor only agreements, or on owner supplied products. The warranty period begins at the time of purchase.

* SEMI TRANSPARENT STAIN WARRANTY - BUDGET FENCE N DECK guarantees its workmanship and product performance not to exceed (12 months). TRANSPARENT AND CLEAR SEALERS ARE NOT WARRANTIED. If the product fails to PROVIDE PROTECTION from rain, U.V. light, and mildew, (NOT INSECTS, SPRINKLER SYSTEMS DAMAGE OR FADING) provided that the wood surface was either new or cleaned prior to the time of installation. BUDGET FENCE N DECK will either furnish an equivalent prorated amount of stain or refund our original purchase price of the product to you. BUDGET FENCE N DECK will not be responsible for (1) labor or the cost of labor for removal or application of any product; or (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. BUDGET FENCE N DECK is not responsible for damage due to acts of nature, or otherwise not related to the construction process during the time of installation. This warranty becomes effective on the date of purchase.

* WOOD STRUCTURE WARRANTY - BUDGET FENCE N DECK guarantees its workmanship for a period of (12 months) on all structures with wood posts and (10 years) on all structures with metal posts, (30 days) on cracked or damaged wood that was not the fault of our own (knots are not covered). BUDGET FENCE N DECK will allow for 1 free visit to perform crack repairs. BUDGET FENCE N DECK will not be responsible for any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. BUDGET FENCE N DECK is not responsible for damage due to acts of nature, or otherwise not related to the construction process during the time of installation. This warranty becomes effective on the date of purchase.

* CONCRETE WARRANTY - BUDGET FENCE N DECK guarantees its workmanship for a period of (12 months) on all concrete structures (CRACKS ARE EXCLUDED). BUDGET FENCE N DECK will not be responsible for any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. BUDGET FENCE N DECK is not responsible for damage due to acts of nature, or otherwise not related to the construction process during the time of installation. This warranty becomes effective on the date of purchase.

dallas fence companies dallas fence repair dallas fence staining

2011-01-17T23:17:00.001-06:00

Budget Fence N Deck
January 17th, 2011 by Administrator

Welcome to Budget Fence N Deck
Finally, a company that offers quality service at a price that wont break the bank. Budget Fence N Deck is member of the BBB. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Did our competition give you an estimate your’e not happy with? Email or fax it to us and tell us where you need to be.

Contact Us Today for a Free Estimate

“Craig Fenderson and his crew are one of the most professional contractors I have ever dealt with. Their price and quality craftsmanship is second to none. Our price quote was 400-600 dollars less than their competition. I purchased a retirement property for my mother, and had many specific request that went above and beyond. The work that was done on my fence and deck addition was unparallel, and more than I could have imagined. I would highly recommend this company to my family and friends.”

Thanks again, Ron Welty

“Thanks for making my new fence experience so painless! My fence looks great! I am so pleased with the quality and workmanship. The crew was fast, friendly and efficient. I couldn’t be more happy with the results.”

Betsy Roe

“I have a great fence guy! His pricing is reasonable and he promised to have it torn down, rebuilt and the old fence carried off in 2 days. He started and completed the job one day! The crew was very nice, friendly and you could tell customer service was foremost. Craig (owner) was very responsive to all my questions and very available. He also does holiday light install and take-down for $350 – $399 (including lights). I’m very pleased! “

Marci Byler

“Your fencing skills are top notch!. Thanks for a wonderful job! We look forward to the soon to be painted house!”

Amy & Renee

Serving Dallas/Ft. Worth
(972) 537-7766
Featured Services
Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining Walls
Fence Staining and Sealing
Painting
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation
Posted in Fence, Fence Repair, Fence Staining | Edit | Comments Off

Dallas garage floor epoxy companies epoxy dallas garage epoxy
January 17th, 2011 by Administrator

Welcome to Budget Fence N Deck
www.budgetfencendeck.com

(972) 537.7766

Finally, a company that offers quality service at a price that wont break the bank.

Budget Fence N Deck is member of the BBB. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Check our specials, then contact us today for a free estimate. (Our estimates are free as a courtesy to you, however a qualified person must be present.)

Click the pictures.

Did our competition give you an estimate your’e not happy with? Email or fax it to us and tell us where you need to be.
Services:

Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining walls
Fence Staining and Sealing
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation

Dallas-FT. Worth, Texas
(972) 537-7766
(214) 222-5924 Fax

Email: Customer Information

FREE ESTIMATES -
PRICED COMPETITIVELY – WARRANTY

carrollton lewisville allen mckinney richardson plano coppell flower mound southlake keller dallas addison denton grand prairie arlington farmers branch frisco epoxy dallas garage floor

Tags: dallas epoxy dallas garage floor epoxy dallas companies installer installation
Posted in Epoxy, Fence, Fence Repair, Fence Staining | Edit | Comments Off

Plano fence companies | Budget Fence N Deck | Plano fence repair Plano fence staining
January 17th, 2011 by Administrator

Welcome to Budget Fence N Deck
www.budgetfencendeck.com

(972) 537.7766

Finally, a company that offers quality service at a price that wont break the bank.

Budget Fence N Deck is member of the BBB. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Check our specials, then contact us today for a free estimate. (Our estimates are free as a courtesy to you, however a qualified person must be present.)

Click the pictures.

Did our competition give you an estimate your’e not happy with? Email or fax it to us and tell us where you need to be.
Services:

Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining walls
Fence Staining and Sealing
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation

Dallas-FT. Worth, Texas
(972) 537-7766
(214) 222-5924 Fax

Email: Customer Information

FREE ESTIMATES -
PRICED COMPETITIVELY – WARRANTY

carrollton lewisville allen mckinney richardson plano coppell flower mound southlake keller dallas addison denton grand prairie arlington farmers branch frisco

Tags: plano fence companies plano fence staining plano fence repair deck arbor pergola
Posted in Fence, Fence Repair, Fence Staining | Edit | Comments Off

Frisco Fence Companies | Budget Fence N Deck | Frisco fence repair Frisco fence staining
January 17th, 2011 by Administrator

Welcome to Budget Fence N Deck
www.budgetfencendeck.com

(972) 537.7766

Finally, a company that offers quality service at a price that wont break the bank.

Budget Fence N Deck is member of the BBB. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Check our specials, then contact us today for a free estimate. (Our estimates are free as a courtesy to you, however a qualified person must be present.)

Click the pictures.

Did our competition give you an estimate your’e not happy with? Email or fax it to us and tell us where you need to be.
Services:

Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining walls
Fence Staining and Sealing
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation

Dallas-FT. Worth, Texas
(972) 537-7766
(214) 222-5924 Fax

Email: Customer Information

FREE ESTIMATES -
PRICED COMPETITIVELY – WARRANTY

carrollton lewisville allen mckinney richardson plano coppell flower mound southlake keller dallas addison denton grand prairie arlington farmers branch frisco

Tags: friscoe fence companies frisco fence repair frisco fence staining
Posted in Fence, Fence Repair, Fence Staining | Edit | Comments Off

Dallas Fence Companies | Dallas Fence Repair | Dallas Fence Staining
January 17th, 2011 by Administrator

Welcome to Budget Fence N Deck
www.budgetfencendeck.com

(972) 537.7766

Finally, a company that offers quality service at a price that wont break the bank.

Budget Fence N Deck is member of the BBB. We are proud to offer new fences, decks and arbor installation, repair of existing wood structures and staining and sealing.

Our goal is to deliver you a product based on your needs and budget. Because we use quality materials and have exceptional workmanship we can offer services with up to a 10 year warranty.

Check our specials, then contact us today for a free estimate. (Our estimates are free as a courtesy to you, however a qualified person must be present.)

Click the pictures.

Did our competition give you an estimate your’e not happy with? Email or fax it to us and tell us where you need to be.
Services:

Fence Installation
Chain Link Fencing
Wrought Iron Fencing
Fence Repairs
Automatic Driveway Electric Gates
Decks / Arbors
Pergolas / Patio Covers
Concrete Patios
Wood Retaining walls
Fence Staining and Sealing
Garage Epoxy Floors
Radiant Barrier
Christmas Light Installation

Dallas-FT. Worth, Texas
(972) 537-7766
(214) 222-5924 Fax

Email: Customer Information

FREE ESTIMATES -
PRICED COMPETITIVELY – WARRANTY

carrollton lewisville allen mckinney richardson plano coppell flower mound southlake keller dallas addison denton grand prairie arlington farmers branch frisco

Tags: dallas fence companies dallas fence repair dallas fence staining
Posted in Fence, Fence Repair, Fence Staining | Edit | Comments Off

Budget Fence N Deck: Types of Backyard Fences | eHow.com

2010-12-19T21:40:00.000-06:00

Budget Fence N Deck: Types of Backyard Fences eHow.com: "Types of Backyard Fences eHow.com Types of Backyard Fences By Carl S. Miller, eHow Contributor . Types of Backyard FencesImage 1: tim es..."
How To Build A Classic Backyard Fence
Turning your backyard into a distinctive living space.
By Neal Barrett RSS Share July 29, 2005 12:00 AM

If you just want a fence to keep out the neighbor's dog, there are plenty of off-the-shelf choices at your local home center. If, on the other hand, the idea of defining your personal landscape with a touch of architectural flair grabs your imagination, you've come to the right place.

Our lattice-top design makes an ideal privacy screen, but it can do much more. Erect several panels at the corner of your yard to create a sheltered picnic area, or place them in front of a compost pile or toolshed. Either way, you'll be giving your back 40 a welcome touch of class.

MATERIAL WITNESS
We built most of the fence with 3/4-in. No. 2 common pine. This wood will have knots, and it's a good idea to seal the boards with a shellac-based sealer, such as B-I-N, so they don't bleed through the paint job. For the cap, lattice and splines, we switched to 5/4 (1-1/8 in. thick) lumber and used select grade to avoid the knots. The fence is designed to be built indoors, then assembled on-site. The box posts and sandwiched panels make construction easy--just be sure to study the drawing (page 136 in the June 2005 issue of POPULAR MECHANICS) before you begin.

Click here for PM's PDF version of the plans.

MATERIALS LIST
KEY QTY. SIZE DESCRIPTION
FENCE PANEL
A1 4 3/8 x 1-1/8 x 77-5/8" select-grade pine (lattice strip)
B1 19 3/8 x 1-1/8 x 13-7/8" select-grade pine (lattice strip)
C1 8 3/4 x 2-1/2 x 82-3/8" No. 2 pine (rail)
D1 4 3/4 x 3-1/2 x 11-5/8" No. 2 pine (upper stile)
E1 4 3/4 x 3-1/2 x 46" No. 2 pine (lower stile)
F1 1 3/4 x 3 x 82-3/8" No. 2 pine (divider)
G1 2 3/4 x 3-3/4 x 68-3/8" No. 2 pine (endcap)
H1 1 3/4 x 3-3/4 x 83-7/8" No. 2 pine (top cap)
I1 15 3/4 x 5-3/8 x 51" No. 2 pine (slat)
J1 14 3/16 x 1-1/8 x 51" select-grade pine (spline)
GATE
A2 4 3/8 x 1-1/8 x 35-1/8" select-grade pine (lattice strip)
B2 9 3/8 x 1-1/8 x 13-7/8" select-grade pine (lattice strip)
C2 8 3/4 x 2-1/2 x 39-1/4" No. 2 pine (rail)
D2 4 3/4 x 3-3/16 x 11-5/8" No. 2 pine (upper stile)
E2 4 3/4 x 3-3/16 x 44-1/2" No. 2 pine (lower stile)
F2 1 3/4 x 3 x 39-1/4" No. 2 pine (divider)
G2 2 3/4 x 3 x 66-7/8" No. 2 pine (endcap)
H2 1 3/4 x 3 x 40-3/4" No. 2 pine (top cap)
I2 7 3/4 x 5-1/2 x 49-1/2" No. 2 pine (slat)
J2 6 3/16 x 1-1/8 x 49-1/2" select-grade pine (spline)
POST
K 2 3/4 x 5-1/4 x 73-1/4" No. 2 pine (post side)
L 2 3/4 x 3-3/4 x 73-1/4" No. 2 pine (post side)
M 4 5/8 x 1-1/8 x 6-3/4" select-grade pine (cap trim)
N 1 1-1/8 x 7-1/2 x 7-1/2" select-grade pine (post cap)
O 1 3-1/2 x 3-1/2 x 84" pressure-treated (post core)
FASTENERS
P as reqd. No. 20 joining plate
Q as reqd. 5/8" brad
R as reqd. 6d galvanized finishing nail
S as reqd. 8d galvanized finishing nail
T as reqd. 11/4" No. 8 galvanized fh woodscrew
U as reqd. 2" No. 8 galvanized fh woodscrew
Misc.: Waterproof glue; primer; shellac-based sealer; exterior wood filler; paint; 8-in. ornamental strap hinge, Stanley No. 611043;11-in. heavy-duty thumblatch, Stanley No. 622044.
Note: Quantities indicated are for one gate, one fence panel and one post.

TAKING STOCK
While painted pine was our choice, it doesn't have to be yours. At the low end of the price spectrum is pressure-treated lumber, followed in increasing cost by pine, cedar, redwood, mahogany and teak. These are all woods with some degree of resistance to weathering and decay, although pine depends on a good paint job to survive the elements. Of course, prices vary with availability, grade, size and specific species. For example, western red cedar can cost over twice the price of northern white cedar. And at the high end, teak can run over 10 times the cost of the No. 2 pine we used.

In most cases, you'll find pine, cedar and pressure-treated stock at your local lumber dealer. For the pricier woods, check out mail-order suppliers such as L.L. Johnson Lumber Manufacturing at www.theworkbench.com.

From left: pressure treated, pine, cedar, redwood, mahogany, teak.

PREP WORK
The first step is to rip all the stock to width, beginning with the 3/8-in.-thick lattice strips (1). A portable circular saw will handle the work, but use an edge guide to ensure uniform thickness. Prepare the 3/16-in. spline stock in the same way. Then, crosscut all fence pieces to length. To ensure square cuts, guide your saw with a carpenter's square held against the stock edge.

Prepare the lattice strips for assembly by marking the cross-strip locations (2). For speed and accuracy, clamp each panel group together and mark all the strips at once.

PANEL DETAILS
Join the lattice strips with 5/8-in. brads (3). If the assembly isn't perfectly square, simply pull it into shape before sandwiching it between its two frames. Set the brads below the surface of the wood and fill with glazing putty or exterior wood filler. Plate joinery is the fastest way to create accurate and reasonably strong frame joints.

After cutting the slots at the ends of the pieces (C1, D1 and C2, D2 in our PDF plans), apply waterproof glue, join the parts and clamp for about an hour (4).

Place a frame over a lattice and secure it with 6d nails. Drive the nails about an inch so they don't break through the thin strips (5). Flip the panel over, support it on a few spacers and nail the opposite frame, driving the nails flush. Then, finish driving the nails on the first side.

With all of the lattice assemblies built, nail a divider (F1, F2) to the bottom of each. Use a 3/16-in. slot cutter in a router table to cut spline slots in the edges of the bottom-panel slats (I1, I2) (6). You also could do the job with successive passes on a table saw. Prime the splines (J1, J2), use them to join the slats for one panel and lay the subassembly on the floor. Don't glue the splines in the slat grooves, as the joints need to be able to expand and contract.

Assemble the lower panels in the same way as the lattice panels (7). Tack one frame to the slats, then flip the assembly over to secure the opposite frame. Then, drive all nails flush.

Stand a lower panel upright and place a lattice section along its top edge (8). Drive nails at an angle through the divider and into the top rails of the lower panel.

Secure the endcaps (G1, G2) with 2-in. deck screws (9). Then, nail the top (H1, H2) to the lattice panel rails.

POST BUILDING
Box posts make sense because the height of each post can be adjusted to level the fence once it's in place. Keep in mind that you may have to alter post lengths and create a stepped fence if your site is gently sloped. Before you build the boxes, prime the insides of the boards to protect against moisture. Assemble the box parts (K, L) with 6d nails (10).

Cut 5/4 stock to size for the post caps and mark guidelines around the edges for the cap bevels. Shape the bevels with a block plane (11). Then, use a chamfer bit and router table to cut the bevel on the cap trim (M).

ASSEMBLY
On-site construction will be easier if you join the posts to the panels in the shop, mark and number the parts, and then disassemble them. Use 1-1/4-in. screws driven through the endcaps (G1) (12).

Mark and cut the notches in the gate endcaps (G2) so the hinges and latch hardware will sit flush against the gate rail surfaces. Use a small handsaw to cut the notch edges and switch to a chisel to remove the waste (13). Attach the hinges to the gate and post, and then remove them until final assembly.

Slide a pressure-treated 4 x 4 post core 4 ft. into each post box (14). Secure with screws, but make sure that the heads are accessible so post heights can be adjusted on-site. Prime and paint the bottoms of all panels, gates and posts. Once the fence is installed, these parts will be difficult to reach. And, they're the most susceptible to moisture infiltration.

Types of Backyard Fences

2010-12-19T21:37:00.000-06:00

Types of Backyard Fences

Types of Backyard Fences
By Carl S. Miller, eHow Contributor .
Types of Backyard FencesImage 1: tim eschaton: Flickr.com; Image 2: Hammer51012: Flickr.com; Image 3: shekay: Flickr.com; Image 4: di_the_huntress: Flickr.comThe primary function of a backyard fence is to mark the boundaries of your property. However, it may also serve a number of other purposes, from child and pet containment to mere decoration. Residential fences come in many different designs. The fence you choose for your backyard will depend entirely on the purposes you intend it to serve.
.Wood
There are many options when it comes to the type of wood, but as far as structure is concerned, most wooden fences fall into one of three categories: picket, privacy and ranch.
Picket
This category includes the classic "white picket fence." Wooden boards stand vertically, spaced usually 1 ½ inches apart. Horizontal boards at the top and bottom connect these sets of "pickets" to wooden posts. These fences are primarily decorative fences, as they do not provide much privacy or security, standing only 3 to 5 feet tall. However, they easily contain small pets and children.
Privacy
As the name suggests, these fences are built for privacy. According to Beeson Fence Builders, "these types of fences can be built to heights as high as 8 feet tall." They also do not contain visible gaps between the wooden boards. Privacy fences are the most secure out of the wooden fences and may screen your yard from heavy winds.
Ranch

Split rail ranch fenceRanch style fences have vertical posts spaced about eight feet apart, connected by either two or three evenly spaced wooden rails. These fences offer no protection from intruders but are often used to contain large livestock. These fences, especially the split rail variety, are also used decoratively.
Chain Link

Chain link fenceChain link fences are by far the most versatile. They have metal posts that stick vertically from concrete foundations and support crisscross chain link sections. These fences vary widely in height and, while alone they offer no privacy, vinyl slats can be positioned vertically through the slats to lower visibility. Chain link fences are quite durable and, depending on the height, can be very secure.
Wrought Iron/Aluminum

Wrought iron fenceWrought iron and aluminum fences are usually built for their ornamental value, aluminum functioning as the cheaper alternative to wrought iron. These fences are structurally similar to the picket fence, except that the posts sit in a concrete foundation. While these fences do not offer much in the way of privacy, they are extremely durable and easily maintained.
Vinyl
Vinyl fences really don't have their own style. Vinyl is simply used to cost-effectively emulate the designs of non-vinyl fences. It can be made to look like a metal or wood fence. In addition to being inexpensive, vinyl is also very durable and low-maintenance.
.

Dallas Fence Company | Budget Fence N Deck - (972) 537-7766

Dallas Custom Automatic Wrought Iron Gates - Service Calls - Preventative Maintenance Agreements

Frisco Fence Company – Budget Fence N Deck

Dallas Fence Pictures - Budget Fence N Deck

What Qualities Should a Good Fence Contractor Have?

What Should I Look for in a Residential Fence Contractor?

What Can a Fence Contractor Do for Me?

Advantages of Calling a Fence Installation Service Provider

How to Maintain a Wooden Fence

What Kind of Wood Fence Repairs Do I Need to Perform to Keep My Fence Sturdy?

Top 10 Fencing F.A.Q.

10 Questions You Never Got to Ask Your Fence Staining and Sealing Company

Top 10 Fencing F.A.Q. PART – 2

10 Things You Always Wanted to Ask Your Fence Contractor

Tips for Proper Deck Maintenance

How to Make Your Deck Last Longer, According to a Local Deck Contractor

What You Need to Know about Fencing, According to a Fence and Deck Repair Contractor

What You Need to Know about Fencing, According to a Fence and Deck Repair Contractor

What questions do I need to ask during a fence estimate?

What questions should I ask during a fence estimate?

Precast Concrete Fence Installer Texas

Budget Fence N Deck acquires New General Manager for New Year 2014

Budget Fence N Deck acquires

New General Manager for New Year 2014

Dallas Fence - Budget Fence N Deck - Dallas Fence Company - Dallas Fence Repair

Dallas Fence Companies | Budget Fence N Deck | Fence Companies Dallas TX

Dallas Fence Repair Dallas Fence Staining

Dallas Fence Company - Budget Fence N Deck

Welcome to Budget Fence N Deck

Visit our website at: www.budgetfencendeck.com

( 972) 537-7766

Serving Dallas/Ft. Worth (972) 537-7766

The Costs of Building Privacy Fences

The Costs of Building Privacy Fences

Wood Fences

Vinyl Fences

Other Options

Additional Factors

How to Build a Solid Metal Privacy Fenc

How to Build a Solid Metal Privacy Fence

How to Build a Privacy Fence With Metal Poles

How to Build a Strong Privacy Fence for a High Wind Area

Dallas Fence Companies | Budget Fence N Deck | Dallas Fence Installer Contractor Builder Decks Arbors

dallas fence companies dallas fence repair dallas fence staining

Budget Fence N Deck: Types of Backyard Fences | eHow.com

Types of Backyard Fences

Serving Dallas/Ft. Worth
(972) 537-7766