Bur Blog

Urban rider

2012-01-28T19:41:00.000+02:00

One seat three wheeled vehicle with two variations of driving fast and slow. Based on scooter engine. Fits well for cold and rainy weather conditions. Doesn't take to much place.

BSLA 763 variations

2011-12-21T00:28:00.000+02:00

Pearl white.

Buoyant blue.

Glowing red.

Iridescent green.

BSAL 763M

2011-12-19T01:18:00.002+02:00

Continuation of a BS series robotic-cybernetic devices. This time hovering device from the fictional hi-tech company Aerologic. Light, low velocity exploratory spacecraft/aircraft.

Technology: The layered electromagnetic material that creates a non-physical connection between the front wings and the body. This connection is spares mechanical parts and other complex connections. The control of the wings is processed by differentiation of the voltage in the material.

BS Barracuda military version

2011-12-04T15:21:00.001+02:00

BS series hovering spy device by Semiconductor Robotic Aeronautics.

To this model, unlike previous BS Barracuda, added some details like nice green LED's at the right wing and white on the top end of the main body. On both sides completed a combined connection system that service the mounting of different tracking devices and other technical improvements. That in general, gives more completed look to this concept.

P.S: This tail is does not have to stand on rules of aerodynamics.

BS Barracuda

2011-11-22T12:03:00.001+02:00

Barracuda fully automated drone. Photoshop rendering steps.

Shiny blue and itched black.

Terra Prix for Local Motors

2011-10-08T01:07:00.000+02:00

The Terra Prix vehicle and support craft made for sketch competition "Terra Prix 2085. Race the World" organized by Local Motors

Terra Prix - The Race

"There have been races around the world in the past, but Terra Prix is a completely new kind of race. Terra-Pax and the International Prototype Racing Federation are challenging teams to build 1 race vehicle and at least 1 airborne support craft that can make the voyage around the world - A voyage of almost 51,000 miles (82,000Km). There will be a total of five checkpoints where teams can stock up on supplies and parts. Other than those checkpoints teams must be self sufficient and carry enough provisions to complete the race."

Terra Prix racer

Terra Prix racer is high performance, long distance crosscountry vehicle. Rigid, sportive tricycle that can run days and nights providing all basic needs for a driver and navigator during the race. In Terra Prix tricycle applied most advanced eco friendly technologies like water collecting and purifying system that supplies water to hydrogen engine and operators. Advanced modularity technologies and high durability nano materials designed to stand hard in multiple racing conditions.

Specifications and special abilities.

Other functions. Photovoltaic material kite and front unit ski.

Initial sketch based on my old drawing.

Kite investigation sketches and wheel cover design options.

Final sketches with fixed proportions and full detalization.

Some initial rendering.

The iridescent red color, Red Terra team coloring.

Environments. Brake.

Antarctica theme.

Support craft.

Terra Prix Carrier's design based on BS900 Crawler spacecraft layout. After some minor interior changes it can carry up to 20 team members and supplies for them for long distance travel. Carrier does have space to provide full maintains for two Terra Prix racers.

In difference with BS900 the Carrier is adapted to fly on low and high altitudes.

BS Titan

2011-09-30T02:44:00.000+03:00

Small, tough sporty spacecraft.

Ola Liola's version. Buoyant fashionable iridescent coat surface.

Elevator undo concept.

2011-09-27T12:34:00.000+03:00

Can you imagine, you live in multi floor building and you just forgot and accidentally left at home your glasses, wallet, beloved iPad, dog that you take to walk, head, lightsaber and so on. Why you just can't press undo on elevators panel to get back to your floor? Its very simple and pretty useful. Instead of waiting all way down and back, then somebody interrupts your journey and extend your elevator travel.

Multiple press on UNDO (green button). For fun you can browse all stops history simply by pressing undo button few times. Get your self some stiff fun. Lets say, as additional feature hold the UNDO button and all pressed floor numbers just resets and lift stops at closest floor.

Treato.com

2011-09-22T18:25:00.000+03:00

Due to my new position of UI & UX designer at First Life Research, I have started long term project of a brand design for user generated medication database protal, based on patients experiences. The engine of treato.com developed by First Life Research, can literally read and understand the posts about medications and extract information like side effects, which medication was better for certain patient, analize the usage of medication and suggest the switches to other treatments.

Simple, clean, soft, friendly, iconic, catchy pill icon in talk bubble. Totally internet oriented medical brand.

Pogi - cute electroshock weapon

2011-09-22T17:09:00.001+03:00

Pogi - tough electroshock weapon with an innocent toy guise. The ultimate solution for a ladies personal protective equipment and cute on bag toy. Pugi is hidden form attackers sight under funny toy character that can be used instantly to change the situation in favor of the victim. Its an easily accessible tool in a moment of a high tense and a very stressed situation. The research results shows that 90% of ladies can not approach their self protection weapon in the critical, pressured moment just because of the mess in the bag. The concept of Pogi is based on solving of this special problem.

The design is inspired from japanese anime characters. It's scared look empathizes with a frightened state of a wearer, but like any hero character he ready to use its fantastic power for the justice.

Most of its life Pogi handled upside down in order to facilitate quick access to its main function.

To enhance the grip and isolate the internal components, legs and arms made of soft silicon material and the body is coated by colored rubber touch finish.

The Pogi's tongue is a switch button protected from accidental press by body frame.

Tatooizm

2011-06-19T22:54:00.005+03:00

To me, it is always starts from a sketch... Or a scratch. The best way is to make ideation process directly on object. In this case its my body. The hairy hand :)))

Made some rework on paper, just because its hard to make exact lines on human body. Then more accurate and stylized shapes were transferred by carbon paper back to hand to be outlined by machine.

The masters art work were in-scratched on me by Ari Akkerman. Overall tattooing work time took about 26 hours, split to three sessions. Cybercore!!!

Photo by Ariel Broitman.

Owla wannabes

2011-06-18T21:30:00.004+03:00

Images for Teva gallery online shop promotion. Animals obsessed by OlaLiola's illustrations wearing the Owla masks.
Ola is extremely talented designer, super accurate person and deep appreciator of nature. She started her career from very young age. As a child she lived in grandmothers house in Ukrainian village with rich nature around. Her first illustrations was inspired by this place. The rare animals for her young art she picked from magazines, books, encyclopedias and post cards hardly available in that area. Later in her works started appear different mixes and influences of a nature, fashion, masks and femininity creating unique and romantic style.

Rewalk exoskeleton

2011-06-12T12:28:00.112+03:00

Back to 2007 I got a job to model an inclosure backpack of batteries and electronics, then create images of full model with male person. The exoskeleton for disabled peoples was designed and engineered by Taga team for Argo Medical Technologies. This product gives back the ability to walk to person with severe walking impairments. ReWalk is breakthrough in medical tools created to give a substitute to low wheelchair.

Zoom in.

PS: Later, after finishing this renderings I was kindly invited to join to Taga's team for part time job.

Vandalized Better Place recharging spot.

2011-06-04T19:50:00.000+03:00

First ever vandalism act by FFF200 team on Better Place recharging spot.
Beautiful pice of design that soon will be a part of common urban furniture in few cities. During the development the charging statin was tested by different stressful conditions, and now it took test for vandalism (lets say alternative art). OlalLiola and me was kindly invited to leave first sign on it.

Rapidly spreading sustainable transportation network and its infrastructure.

Product paint resistance test held under the direction of Nekuda Design Manegment.

Remote some thing adobeing

2011-05-27T14:22:00.000+03:00

I have made some sketch renderings for short contest at idsketching, but submitted it to late. :) Was to busy, you know...

Che Buryat

2011-05-15T00:28:00.000+03:00

Pure Che Buryat.

Future t-shirt.

BS B3 Red Devil

2011-05-07T00:08:00.002+03:00

Identified flying object. I do not know what it was doing there...

BS1000 v2

2011-04-24T21:18:00.004+03:00

Early morning on the table. o_O

Design evolution of BS1000 spacecraft. Non-rectilinear shapes which serve to distort and dislocate body elements. Deconstructed structure with transparent solar panel in the middle.

Pure cockroaches micro post

2011-04-23T22:43:00.006+03:00

Recently i found the micro post about my Pure cockroaches project on http://specere.tumblr.com/. Its one of the works i would like to keep working on, but with some biotechnological implementations. There are fluorescent gene were found few years ago, which name is Enhanced Green Fluorescence Protein, and it makes the live body to glowing in the dark. It was extracted by scientists from jelly fish and applied to some species. The modified animals like fishes, cats and mices already living with glowing skin, so its really short way to make the cockroaches to appear in any color.

BS series B1 B2 and B3

2011-04-19T19:35:00.011+03:00

Another BS series spacecraft. Three civilian spacecrafts based on bomber layout. The evolution of design.

B1 First generation. Bulky designed body.

B2 Second generation. Lighter version with tail segments.

B3 Third generation. Red devil.

Wing spacesip ver 2.

2011-04-17T00:33:00.003+03:00

Same old Wing spaceship version 2, built and rendered at 2000. In comparison to first version this one have two small side wings.

Strong association

2011-03-27T18:50:00.006+02:00

I do nooo! But from time to time I catch myself associating the flag of Amsterdam with an erotic corset. Whaaat?! The lace crosses of the corset and white St Andrew's crosses on black strip are practically the same. The red color is just identical. Maybe there are some historical connections between these two symbols. They did originate at the same period more or less. Even if its not intentional, in my opinion the flag has a solid semantic language of red light district of Amsterdam (XXX).

Amsterdam logo from Amsterdam blog and original corset image from Magic Mirror

BS from part render

2011-03-10T20:13:00.006+02:00

Render of BS from part at Photoshop.

Wing spaceship.

2011-03-05T02:41:00.010+02:00

I was highly impressed by spaceships from very young age. I can remember the days I watched sci-fi moves with psychotic interest, trying to capture and remember all frames with space apparatuses. After that I was drawing them and trying to design from scrap materials. Most successful models are survived till today and standing on the shelfs at mothers home. :)

At teenage ages I had a lot of free time that was gladly dedicated to computers. I was kinda geek. But most time I wasn't spending at chats or games, I was trying and testing 3D software. From books I have learned to build and render my ideas in 3Ds MAX. I was spending more then 10 hours a day in front of monitor just having fun from creation of 3D scenes.

Now, cleaning up my back up disks I have found some works from that period. Among them was buried a "Wing" bubble spaceship model, made at 2000. It's one of the works that later was included to my studies application portfolio.

Once I watched "Lost in space" movie and was highly impressed by "Eagle One" bubble fighter. At that time I could't find any images or any info about the ship. I had only a particle remembrance of it's shape. After some planing I have designed, modeled and animated simplified bubble spaceship in 3Ds MAX 4.

"Eagle one" bubble fighter from "Lost in space"

Side view drawing from 1999.

Wing spaceship version one model.

Animation

BS from part spacecraft

2011-02-25T20:09:00.003+02:00

Inspired by engineered like starship part I have made quick sketch at SketchbookPro app. To my surprise this sketch was included to presentation for a customer to show the aesthetic potential of part. :)

This part is tiny piece of some complex system, it's about 6 cm long and have to be load-caring chassis.