List of Latest CAD & CAM RFPs Posted on RFPMart RFPMart LLC en-us https://www.rfpmart.com/cad-cam-drafting-rfp-government-contract.html Fri, 15 May 2026 11:12:17 -0700 (1) Vendor needs to provide AutoCAD licensing services.(2) Main RFP document not available at here, only detail information at here, specification may be obtained by email.  Fri, 15 May 2026 00:00:00 -0700 http://www.rfpmart.com/1115542-usa-indiana-autocad-licensing-services-info-only-rfp-not-included-rfp.html http://www.rfpmart.com/1115542-usa-indiana-autocad-licensing-services-info-only-rfp-not-included-rfp.html 36C25526R0111–V15–26–101 Update Infrastructure Drawings Tue, 12 May 2026 00:00:00 -0700 http://www.rfpmart.com/1113896-us-fed-c211--v15-26-101-update-facility-infrastructure-drawings.html http://www.rfpmart.com/1113896-us-fed-c211--v15-26-101-update-facility-infrastructure-drawings.html This is a request for information. Please review the below NSN and provide us with any sources that are able to manufacture the item. Please also provide the location of the manufacturer (City and State OR country if applicable). Please also provide Points of contact for these manufacturers if available. All of this information can be submitted to Francis Rettzo at FRANCIS.RETTZ[email? redacted], phone [ phno? redacted ] This sources sought is for informational purposes only. This is not a request for proposal. It does not constitute a solicitation and shall not be construed as a commitment by the Government. Responses in any form are not offers and the Government is under no obligation to award a contract as a result of this announcement. No funds are available to pay for preparation of responses to this announcement. Any information submitted by respondents to this notice is strictly voluntary. We thank you in advance for your assistance.4030–002434439, Clamp, Wire Rope Sad Fri, 08 May 2026 00:00:00 -0700 http://www.rfpmart.com/1112594-us-fed-spe4a626rx882-4030-002434439-clamp-wire-rope-sad-drawing-ms16842-5-type-i-class-i.html http://www.rfpmart.com/1112594-us-fed-spe4a626rx882-4030-002434439-clamp-wire-rope-sad-drawing-ms16842-5-type-i-class-i.html –NO PHONE INQUIRIES– TDP will only be available once solicitation notice is posted for those who have active DD2345 forms.**Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical datawill not be made available until the solicitation is released to public, on or around the estimated date listed below.An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive alltechnical data. **Breechblock Forging (Rough Machined), per drawing number 12591138, Rev B, for 105mm M20First Article Testing is Required.Quantity: 50 EACHDelivery Point: FOB DestinationEstimated Date of Solicitation: May 27, 2026SAM Notice: In order to be eligible for award, the successful offeror`s System for Award Management (SAM)Registration must be active and include representations and certifications.Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not beprovided. Upon release of the solicitation, it will be available on SAM.gov Opportunities website athttps://sam.gov/content/home and will be listed under Army Contracting Command ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, theGovernment is under no obligation and is in fact unable to maintain a bidder`s mailing list. It is therefore incumbentupon any interested parties to periodically access the above Internet address in order to obtain any amendmentsthat may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set Fri, 08 May 2026 00:00:00 -0700 http://www.rfpmart.com/1112570-us-fed-breechblock-forging-rough-machined-per-drawing-number-12591138-rev-b-for-105mm-m20.html http://www.rfpmart.com/1112570-us-fed-breechblock-forging-rough-machined-per-drawing-number-12591138-rev-b-for-105mm-m20.html **Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical data will not be made available until the solicitation is released to public, on or around the estimated date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data. **Muzzle Brake Forgings, per Drawing # 11583670, Revision New, for 155mm M776 Cannon.First Article Testing is Required.Quantity: 40 EachDelivery Point: FOB DestinationEstimated Date of Solicitation: May 21, 2026SAM Notice: In order to be eligible for award, the successful offeror`s System for Award Management (SAM) Registration must be active and include representations and certifications.Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on SAM.gov Opportunities website at https://sam.gov/content/home and will be listed under Army Contracting Command ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder`s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.Technical Data Package: Instructions will be available in the solicitation on how to access the associated technical data package.Critical Military Technical Data: The solicitation document contains information that has been designated as “Militarily Critical Technical Data.“ Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at [ phno? redacted ]or http://www.dlis.dla.mil/ccal. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. Fri, 08 May 2026 00:00:00 -0700 http://www.rfpmart.com/1112503-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html http://www.rfpmart.com/1112503-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html **Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical data will not be made available until the solicitation is released to public, on or around the estimated date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data. **Muzzle Brake Forgings, per Drawing # 11583670, Revision New, for 155mm M776 Cannon.First Article Testing is Required.Quantity: 40 EachDelivery Point: FOB DestinationEstimated Date of Solicitation: May 21, 2026SAM Notice: In order to be eligible for award, the successful offeror`s System for Award Management (SAM) Registration must be active and include representations and certifications.Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on SAM.gov Opportunities website at https://sam.gov/content/home and will be listed under Army Contracting Command ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder`s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.Technical Data Package: Instructions will be available in the solicitation on how to access the associated technical data package.Critical Military Technical Data: The solicitation document contains information that has been designated as “Militarily Critical Technical Data.“ Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at [ phno? redacted ]or http://www.dlis.dla.mil/ccal. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. Fri, 08 May 2026 00:00:00 -0700 http://www.rfpmart.com/1112502-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html http://www.rfpmart.com/1112502-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html Vendor needs to provide AutoCAD drawings services to provide information related to the preparation of such drawings, including planning approach and indicative costing, to inform potential future procurement strategies to the government authority located in Alberta.• The city is seeking non–binding information regarding the preparation of updated drawings for three city facilities, including the following drawing layers; • Floor plans – detailing room layout, door and window placements, dimensions, circulation areas etc. • Electrical drawings. • Mechanical (HVAC drawings) and ductwork layouts. • Plumbing and drainage.   Sat, 25 Apr 2026 00:00:00 -0700 http://www.rfpmart.com/1106386-canada-alberta-rfi-for-autocad-drawings-services-rfp.html http://www.rfpmart.com/1106386-canada-alberta-rfi-for-autocad-drawings-services-rfp.html The United States Army Contracting Command – Detroit Arsenal (ACC–DTA) intends to solicit, under solicitation W912CH–26–R–0006, a firm–fixed price, two–year requirements contract for the procurement of Dial Bore Gage Assembly – Kit Drawing for the following:Noun: Dial Bore Gage Assembly – Kit DrawingNSN: [ phno? redacted ]762Part Number: 12901228NAICS: 332994Technical Data Package Information: There is a technical data package (TDP) associated with this procurement. It is distribution code D which limits to the access to Department of Defense (DoD) and U.S. Contractors only. The TDP will only be made available to contractors if/when a solicitation is released. To be eligible to gain access to the TDP, the vendor must have a current DD 2345, Militarily Critical Technical Data Agreement certification on file with the Defense Logistics Information Service (DLIS). If the vendor has a current certification, they are required to submit a request to access the TDP in SAM.gov. Access will be granted, pending verification of the contractor`s active registration in Joint Certification Program (JCP). Upon completion of the purposes for which Government Technical Data has been provided, the offeror, and all subcontractors, vendors, and sub–vendors of the offeror, are required to destroy all documents, including all reproductions, duplications, or copies thereof as may have been further distributed. Destruction of this technical data shall be accomplished by: shredding, pulping, burning, or melting any physical copies of the TDP and/or deletion or removal of downloaded TDP files from computer drives and electronic devices, and any copies of those files.First Article Testing: RequiredCAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a mailing list. The burden is therefore on any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal nonresponsive and result in the rejection of the proposal. For technical assistance in doing business with the Government, and doing business electronically, please visit the Procurement Technical Assistance Center (PTAC) website at http://www.aptac–us–org/ to locate a reginal center. NOTICE TO ALL CONTRACTORS: All contractors who provide goods/services to the Department of Defense (DoD) must be registered in the System for Award Management (SAM). You may register and obtain further information via the Internet at https://www.sam.gov/SAM/pages/public/loginFAQ.jsf. If you have any further questions please contact Kaley Weeden, email at [email? redacted]. Mon, 20 Apr 2026 00:00:00 -0700 http://www.rfpmart.com/1103361-us-fed-synopsisdial-bore-gage-assembly-kit-drawing-nsn-5280-01-560-1762.html http://www.rfpmart.com/1103361-us-fed-synopsisdial-bore-gage-assembly-kit-drawing-nsn-5280-01-560-1762.html (1) Vendor needs to provide facilities computer aided design (CAD) services to the government authority located in CA.– provide professional computer aided drafting (CAD) services to support agency Facilities Projects.– Facilities CAD with completing as–built projects throughout agency properties.– Services shall include professional resources that specialize in the following disciplines:– Architectural, civil, structural, mechanical, electrical, plumbing, fire alarm, interiors, telecom, and other disciplines as required.– Each project assigned may consist of more than one discipline as part of the overall task.(2) All the questions must be submitted no later than April 24, 2026.(3) The contract period will be for five years. (4) Pre–bid meeting will be held on April 24, 2026. Sat, 18 Apr 2026 00:00:00 -0700 http://www.rfpmart.com/1102259-usa-california-facilities-computer-aided-design-cad-services-rfp.html http://www.rfpmart.com/1102259-usa-california-facilities-computer-aided-design-cad-services-rfp.html Vendor needs to provide computer–aided management of emergency operations services to the government authority located in Hampton, VA. Basic topics (refresher) will include:➢ Block Definition Diagram➢ Packages and Model Structure➢ Activity Diagrams➢ Sequence Diagrams➢ State Machine Diagrams➢ Requirements Diagrams➢ Tailored Use Case Diagrams➢ Constraints and Parametric Diagrams➢ Cross Cutting Relationships and Model Analysis➢ Developing Concept, Logical, and Physical Models (Lab) Thu, 09 Apr 2026 00:00:00 -0700 http://www.rfpmart.com/1097971-usa-hampton-virginia-computer-aided-management-of-emergency-operations-services-rfp.html http://www.rfpmart.com/1097971-usa-hampton-virginia-computer-aided-management-of-emergency-operations-services-rfp.html Vendor needs to provide CAD model conversion and comment adjudication services to the government authority located in Florida.– Perform a large–scale Computer–Aided Design (CAD) model conversion and engineering comment adjudication project.– Convert approximately 8,000 CAD models from their source formats into native SolidWorks files.– Converted models must be native SolidWorks parts (.sldprt) and assemblies (.sldasm) with full feature tree history and design intent preserved. Tue, 07 Apr 2026 00:00:00 -0700 http://www.rfpmart.com/1096423-usa-florida-rfi-for-cad-model-conversion-and-comment-adjudication-services-rfp.html http://www.rfpmart.com/1096423-usa-florida-rfi-for-cad-model-conversion-and-comment-adjudication-services-rfp.html **Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical data will not be made available until the solicitation is released to public, on or around the estimated date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data. ***NO PHONE INQUIRIES*Muzzle Brake Forgings, per Drawing # 11583669, Revision New, for 155mm M284 Cannon.First Article Testing is Required.Quantity: 54 eachDelivery Point: FOB DestinationEstimated Date of Solicitation: April 15. 2026SAM Notice: In order to be eligible for award, the successful offeror`s System for Award Management (SAM) Registration must be active and include representations and certifications.Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on SAM.gov Opportunities website at https://sam.gov/content/home and will be listed under Army Contracting Command ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder`s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.Technical Data Package: Instructions will be available in the solicitation on how to access the associated technical data package.Critical Military Technical Data: The solicitation document contains information that has been designated as “Militarily Critical Technical Data.“ Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at [ phno? redacted ]or http://www.dlis.dla.mil/ccal.Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. Mon, 30 Mar 2026 00:00:00 -0700 http://www.rfpmart.com/1092695-us-fed-muzzle-brake-forgings-per-drawing--11583669-revision-new-for-155mm-m284-cannon-for-the-watervliet-arsenal.html http://www.rfpmart.com/1092695-us-fed-muzzle-brake-forgings-per-drawing--11583669-revision-new-for-155mm-m284-cannon-for-the-watervliet-arsenal.html (1) Vendor needs to provide draft plans reproduction services to the government authority located in Mountain View, CA.– Full–service large format copy/reproduction service provider to produce.– Plan Sheets—24”x 6”, single–sided, 30% Recycled Engineering Bond, 20# white. – One inch (1”) wraparound cardstock border on the left side. Two hundred (200) sheets or less—use Heavy–Duty (HD) Staple binding in four (4) places. – Two hundred (200) sheets or more—use 3–hole punch with screw post binding. – Reduced–Size Plans—11” x 17” duplex, 20# white paper, with front–and–back colored 65# cover, 30% recycled paper stock.– Electronic file original, first–out prints – Electronic file additional prints/sets – Reduced–Size Plans, 12”x18” prints – Large Format Color print, additional prints – Edge Binding, HD staples, up to 200 sheets – Edge Binding, 3–hole punch/screw post, over 200 sheets – Scan 8.5”x11” to file, PDF format, no output – Scan 11”x17” to file, PDF format, no output (2) The contract period will be for one year.(3) All the questions must be submitted no later than March 24, 2026. Thu, 12 Mar 2026 00:00:00 -0700 http://www.rfpmart.com/1084258-usa-mountain-view-california-draft-plans-reproduction-services-rfp.html http://www.rfpmart.com/1084258-usa-mountain-view-california-draft-plans-reproduction-services-rfp.html (1) Vendor needs to provide fire and police computer–aided dispatch systems, records management systems, integration for public safety CAD and RMS, automated field reporting (AFR), evidence and property management, data migration, workflow and collaboration, National Incident–Based Reporting System (NIBRS) reporting, Criminal Justice Information Services (CJIS) compliance, Commission on Accreditation of Law Enforcement Agencies (CALEA) compliance, and data mining• Implementing an integrated, robust, and customizable CAD, RMS, AFR, Mobil Digital Computer, and case management system into one platform.• Ensuring NIBRS compliance.• Seamless information sharing with partner agencies utilizing interfaces.• Incorporation of industry best practices to streamline overall agency workflows.– Gap & Efficiency Analysis:o Proponent to analyze current CAD operations to identify inefficiencies and challenges, including infrastructure, technological limitations, and integration issues– Future Needs Projections:o Proponent to project future needs based on population growth, technological changes, and evolving operational requirements. This projection shall include potential scalability issues and futureproofing recommendations.– Essential Elements of Contract Negotiation Expected:o Engage in discussions to optimize CAD system costs, establish recurring fees, and explore potential discounts for upcoming features.o Establish payment schedules linked to project milestones, ensuring that final payments are dependent on the successful completion of the project.o Collaborate with City–selected stakeholders to gather necessary information and requirements.o Review and revise drafts to align with regulatory standards and City expectations.o Provide expert advice on technical contractual terms and implications.o Facilitate discussions to resolve any disputes or ambiguities in the contract.(2) All question must be submitted no later than March 24, 2025. Fri, 27 Feb 2026 00:00:00 -0800 http://www.rfpmart.com/1078876-usa-california-computer-aided-dispatch-system-rfp.html http://www.rfpmart.com/1078876-usa-california-computer-aided-dispatch-system-rfp.html **Important Notice to All Interested Parties: This is a presolicitation notice.Further information and technical data will not be made available until thesolicitation is released to public, on or around the estimated date listedbelow. An active DD Form 2345, Militarily Critical Technical DataAgreement, must be provided in order to receive all technical data. **Containers per Drawing # 11579789, for 120MM M256 CannonFirst Article Testing is Required.Quantity: 270 eachDelivery Point: FOB DestinationEstimated Date of Solicitation: March 4, 2026SAM Notice: In order to be eligible for award, the successful offeror`sSystem for Award Management (SAM) Registration must be active andinclude representations and certifications.Location of Posted Solicitation: This solicitation will be issuedelectronically, therefore hardcopies will not be provided. Upon release ofthe solicitation, it will be available on SAM.gov Opportunities website athttps://sam.gov/content/home and will be listed under Army ContractingCommand ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will anyamendments thereto. Because of this, the Government is under no Thu, 26 Feb 2026 00:00:00 -0800 http://www.rfpmart.com/1078742-us-fed-containers-per-drawing--11579789-for-120mm-m256-cannon-for-the-watervliet-arsenal.html http://www.rfpmart.com/1078742-us-fed-containers-per-drawing--11579789-for-120mm-m256-cannon-for-the-watervliet-arsenal.html **Important Notice to All Interested Parties: This is a presolicitation notice. Further information and technical data will not be made available until the solicitation is released to public, on or around the estimated date listed below. An active DD Form 2345, Militarily Critical Technical Data Agreement, must be provided in order to receive all technical data. **Muzzle Brake Forgings, per Drawing # 11583670, Revision New, for 155mm M776 Cannon.First Article Testing is Required.Quantity: 19 eachDelivery Point: FOB DestinationEstimated Date of Solicitation: March 12, 2026SAM Notice: In order to be eligible for award, the successful offeror`s System for Award Management (SAM) Registration must be active and include representations and certifications.Location of Posted Solicitation: This solicitation will be issued electronically, therefore hardcopies will not be provided. Upon release of the solicitation, it will be available on SAM.gov Opportunities website at https://sam.gov/content/home and will be listed under Army Contracting Command ACC–WVA (ACCWVA).CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is in fact unable to maintain a bidder`s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments that may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offers may render your offer nonresponsive and result in the rejection of same.Technical Data Package: Instructions will be available in the solicitation on how to access the associated technical data package.Critical Military Technical Data: The solicitation document contains information that has been designated as “Militarily Critical Technical Data.“ Only businesses that have been certified by the Department of Defense, United States/Canada Joint Certification Office, have an active DD2345 and have a valid requirement may have a copy of the solicitation document and technical data. To obtain certification, contact the Defense Logistics Information Service (DLIS) at [ phno? redacted ]or http://www.dlis.dla.mil/ccal. Requests for technical data from foreign sources or representatives (other than Canada) will not be considered.One or more of the items under this acquisition is subject to the World Trade Organization Government Procurement Agreement and Free Trade Agreements. Thu, 26 Feb 2026 00:00:00 -0800 http://www.rfpmart.com/1078682-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html http://www.rfpmart.com/1078682-us-fed-muzzle-brake-forgings-per-drawing--11583670-revision-new-for-155mm-m776-cannon-for-the-watervliet-arsenal.html Maximum of the contract (including option): $13,034,812.12NSN: 2520–010985124NSN: 2940–011131248NSN: 2930–011332143NSN: 2990–011901089The objective of this procurement is to place the items in a firm fixed price, indefinite delivery indefinite quantity (IDIQC) long–term contract (LTC) of a maximum of five (5) years, divided into a base period of three–years (3–year) and two option periods of one (1–year). Option years are to be opted at the discretion of the Government. The total duration of the contract shall not exceed five (5) years. The Government will solicit the acquisition under FAR (Federal Acquisition Regulation) Part 15, Contracting by Negotiation. Certified Cost and Pricing Data is not currently required. The scope of the procurement is limited to the items listed in Section B of the solicitation. The Government does not intend to bundle this item.Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the Contracting Officer their interest and capability to satisfy the Government`s requirement with a commercial item within 15 days of this notice.Unit of Order: EACH (EA)Destination Information: CONUSDelivery Schedule: See solicitation.The solicitation will be available on the Internet at http://www.dibbs.bsm.dla.mil/ on or about 3/6/2026. Hard copies of this solicitation are not available.Various Increments Solicited: see solicitation for price ranges.TYPE OF SET–ASIDE: None Tue, 24 Feb 2026 00:00:00 -0800 http://www.rfpmart.com/1077588-us-fed-vehicle-components-drawing-available.html http://www.rfpmart.com/1077588-us-fed-vehicle-components-drawing-available.html (1) Vendor needs to provide computer–aided dispatch (CAD) and records management system (RMS).– Core system requirements,– CAD and RMS functionality for law enforcement, fire, EMS, and emergency management operations.– Separate configuration for County and Highland County incident numbering.– Secure data storage, retrieval, and audit capability.– Integrated mapping and GIS support.– Maintenance access to historical and legacy data.– User–friendly interface appropriate for high–stress, multitasking communications environments.– Mapping requirements – Mapping functionality within the CAD system.– How GIS data is ingested, maintained, and updated.– How often mapping data updates occur and who is responsible for updates.– NG911 support– Call assignment and reporting– Assigns calls to agencies within each county.– Supports multi–jurisdictional dispatching.– Allows user configuration of response plans, notifications, and unit assignments.(2) All question must be submitted no later than February 24, 2026. Fri, 06 Feb 2026 00:00:00 -0800 http://www.rfpmart.com/1070497-usa-virginia-computer-aided-dispatch-cad-and-records-management-system-rms--rfp.html http://www.rfpmart.com/1070497-usa-virginia-computer-aided-dispatch-cad-and-records-management-system-rms--rfp.html Blueprint drawing numbers 16–200901 and 78–115493 contain unauthorized restrictive markings, and, based upon information and belief, have been abandoned by the Owner/Contractor. The Government asserts its right to require the Owner/Contractor to furnish clear and convincing evidence of the propriety of any restrictive markings used by the contractor under contract on Blueprint drawing numbers 16–200901 and 78–115493. The Government shall correct, cancel, ignore and/or remove any marking not authorized by contract on any technical data on Blueprint drawing numbers 16–200901 and 78–115493 if: (1) the Owner/Contractor fails to respond within sixty (60) days to this written inquiry by the Government (via SAM.gov) concerning the propriety of the markings, or (2) the Owner/Contractor`s response fails to substantiate, within sixty (60) days after this written notice (via SAM.gov), the propriety of limited rights markings by clear and convincing evidence, or of restricted rights markings by identification of the restrictions set forth in the contract. If no response to this SAM.gov inquiry has been received within sixty (60) days by the Contracting Officer, or if the response fails to substantiate by clear and convincing evidence that the markings were authorized, the Contracting Officer shall issue a final decision to cancel, ignore and/or remove such markings from Blueprint drawing numbers 16–200901 and 78–115493, notify the Owner/Contractor accordingly (via SAM.gov), and, thereafter, the Government shall use such technical data on Blueprint drawing numbers 16–200901 and 78–115493 with unlimited rights in accordance with DFARS [ phno? redacted ] Unlimited Rights means rights to use, duplicate, or disclose technical data, in whole or in part, in any manner and for any purpose whatsoever, and to have or permit others to do so.For the Airborne Launch Control Systems (ALCS)Drawing Number 16–200901 issued by Rolm CorporationOriginal Contract Number FO[ phno? redacted ]Issued to GTEFor the Airborne Launch Control Systems (ALCS)Drawing Number 78–115493 issued by Rolm CorporationFO4704–85–C–0032 Original Contract Number Issued to GTE Tue, 27 Jan 2026 00:00:00 -0800 http://www.rfpmart.com/1066064-us-fed-seeking-to-identify-the-owner-of-the-intellectual-property-rights-for-the-following-engineering-drawings-drawing-number-16-200.html http://www.rfpmart.com/1066064-us-fed-seeking-to-identify-the-owner-of-the-intellectual-property-rights-for-the-following-engineering-drawings-drawing-number-16-200.html (1) Vendor needs to provide public safety computer aided dispatch (cad) and records management system (rms) solution.– Develop an implementation and testing plan,– Provide and configure sandbox and production systems per community transit processes, various role permissions, workflows, and use cases,– Facilitate user acceptance testing (UAT) for all functionalities to system configurations as needed.– Real–time computer–aided dispatch with gps/geolocation capabilities – system should instantly track units’ location, plots calls on digital map and uses this live data to automatically suggest / assign the closest / best suited unit to a call.– Field–initiated call functionality and automated incident routing – Allows personnel (field units) to directly create a “call for service” or an event in the CAD system themselves, without call dispatch.– Centralized, searchable incident records and activity logs in RMS.– Integrated maps –overlay Geographical Information System (GIS) that overlay real–time CAD and historical RMS data onto digital maps.(2) All question must be submitted no later than February 10, 2026. Fri, 23 Jan 2026 00:00:00 -0800 http://www.rfpmart.com/1064658-usa-washington-public-safety-computer-aided-dispatch-cad-and-records-management-system-rms-solution-rfp.html http://www.rfpmart.com/1064658-usa-washington-public-safety-computer-aided-dispatch-cad-and-records-management-system-rms-solution-rfp.html