CCNA Exam Answers

CCNA 2 Exploration 4 exam answers-Module 2

2010-05-24T13:54:00.000-07:00

1- A static route that points to the next hop IP will have what administrative distance and metric in the routing table?administrative distance of 0 and metric of 0administrative distance of 0 and metric of 1*** administrative distance of 1 and metric of 0administrative distance of 1 and metric of 12- What address can be used to summarize networks 172.16.1.0/24, 172.16.2.0/24, 172.16.3.0/24, and

CCNA 1 Exploation 4 Exam Answers

2010-05-24T13:46:00.000-07:00

CCNA 1 Exploration 4 Exam Answers-Module 1 CCNA 1 Exploration 4 Exam Answers-Module 2

CCNA Exploartion Exam Answers

2010-05-24T13:37:00.000-07:00

CCNA 1 Exploration 4 Exam AnswersCCNA 2 Exploration 4 Exam Answers

CCNA 2 Exploration 4 exam answers

2010-05-24T13:30:00.000-07:00

ccna 2 exploration 4 exam answers-Module 1ccna 2 exploration 4 exam answers-Module 2More Modules coming soon

CCNA 2 exploration 4 Exam Answers - Module 1

2010-05-24T12:44:00.000-07:00

1. If a router cannot find a valid configuration file during the startup sequence, what will occur?The startup sequence will reset.***The router will prompt the user for a response to enter setup mode.The startup sequence will halt until a valid configuration file is acquired.The router will generate a default configuration file based on the last valid configuration.The router will monitor local

CCNA Discovery 3 Answers

2010-01-11T11:57:00.000-08:00

CCNA Discovery 3 Module 1 AnswersCCNA Discovery 3 Module 2 AnswersCCNA Discovery 3 Module 3 AnswersCCNA Discovery 3 Module 4 AnswersCCNA Discovery 3 Module 5 AnswersCCNA Discovery 3 Module 6 AnswersCCNA Discovery 3 Module 7 AnswersCCNA Discovery 3 Module 8 AnswersCCNA Discovery 3 Module 9 AnswersCCNA Discovery 3 Final

CCNA Discovery 2 Answers

2010-01-11T11:45:00.000-08:00

CCNA Discovery 2 Module 1 AnswersCCNA Discovery 2 Module 2 AnswersCCNA Discovery 2 Module 3 AnswersCCNA Discovery 2 Module 4 AnswersCCNA Discovery 2 Module 5 AnswersCCNA Discovery 2 Module 6 AnswersCCNA Discovery 2 Module 7 AnswersCCNA Discovery 2 Module 8 AnswersCCNA Discovery 2 Final

CCNA Discovery 1 Answers

2010-01-11T11:10:00.000-08:00

CCNA Discovery 1 Module 1 answersCCNA Discovery 1 Module 2 answersCCNA Discovery 1 Module 3 answersCCNA Discovery 1 Module 4 answersCCNA Discovery 1 Module 5 answersCCNA Discovery 1 Module 6 answersCCNA Discovery 1 Module 7 answersCCNA Discovery 1 Module 8 answersCCNA Discovery 1 Module 9 answersCCNA Discovery 1 Final

CCNA Discovery Answers

2010-01-11T10:01:00.000-08:00

CCNA Discovery 1 AnswersCCNA Discovery 2 AnswersCCNA Discovery 3 AnswersCCNA Discovery 4 Answers

CCNA Discovery 3 Final answers

2010-01-06T10:52:00.000-08:00

1- Refer to the exhibit. A network administrator noticed that the VLAN configuration changes at SW2 did not propagate to SW3. On the basis of the partial output of the show vtp status command, what is the possible cause of the problem?VTP V2 mode is disabled.***SW3 is configured as transparent mode.The number of existing VLANs does not match.The configuration revision number does not match.

CCNA Discovery 3 Module 7 Answers

2010-01-06T10:33:00.002-08:00

1.Which two statements describe the function of time-division multiplexing? (Choose two.)Multiple data streams share one common channel.Conversations that require extra bandwidth receive any unused time slices. ******Time slots are utilized on a first-come, first-served basis. *****Packets that are sent during transmission are reconstructed at the receiving end.Priority can be dedicated to one

CCNA Discovery 3 module 9 answers

2010-01-06T10:22:00.004-08:00

1-Refer to the exhibit. Based on the output shown, to which IP network should the workstations in the Support department belong?192.168.1.0172.16.1.0***172.16.3.0172.16.5.02-Refer to the exhibit. A network administrator is doing proactive network maintenance. The administrator pings 192.168.1.100 and compares the results to the baseline data. Based on the comparison of the two pings, what is one

CCNA Discovery 3 chapter 8 Answers

2009-12-22T11:38:00.000-08:00

1-Refer to the exhibit. A network administrator needs to add the command deny ip 10.0.0.0 0.255.255.255 any log to R3. After adding the command, the administrator verifies the change using the show access-list command. What sequence number does the new entry have?010, and all other items are shifted down to the next sequence number5060 *****2-Refer to the exhibit. What happens if

CCNA Discovery 3 chapter 6 Answers

2009-12-22T11:08:00.000-08:00

1-Refer to the exhibit. What statement describes the DR/BDR relationship of the HQ router?HQ is the DR.HQ is the BDR.***HQ is a DROTHER.HQ is a member of an NBMA network.2-Which two features are associated with Frame Relay OSPF point-to-multipoint environments? (Choose two.)***A DR is not elected.The OSPF priority value determines the active DR on the Frame Relay link.***OSPF neighbor routers are

CCNA Exploration 1 module 3 Answers

2009-12-20T12:28:00.001-08:00

1. What application layer protocol is commonly used to support for file transfers between a client and a server?HTMLHTTP*** FTPTelnet2. What are two forms of application layer software? (Choose two.)*** applicationsdialogsrequests*** servicessyntax3. A network administrator is designing a network for a new branch office of twenty-five users. What are the advantages of using a client-server model?

CCNA Exploration 1 module 2 answers

2009-12-20T12:16:00.000-08:00

1. Which two layers of the OSI model have the same functions as the TCP/IP model Network Access Layer? (Choose two.)NetworkTransport***Physical***Data LinkSession2. What is a primary function of the trailer information added by the data link layer encapsulation?***supports error detectionensures ordered arrival of dataprovides delivery to correct destinationidentifies the devices on the local

CCNA 1 Exploration Module 1 answers

2009-12-20T12:14:00.000-08:00

1. Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.)*** They are non-network connections.They are used to connect the router to the rest of the production network.They are synchronous serial ports.*** They are used for initial router configuration.*** They are asynchronous serial ports.They are accessed using their assigned IP

CCNA Discovery 3 chapter 5 answers

2009-12-13T12:45:00.000-08:00

1-bWhat three statements are true about routers that are configured for EIGRP? (Choose three.)***They can support multiple routed protocolsThey can support only link-state protocols.They send their entire routing tables to neighboring routers.***They send partial routing updates in response to topology changes.They send routing updates to all other routers in the network.They use hello packets to

CCNA 3 Discovery chapter 7 answers

2009-12-05T11:29:00.001-08:00

Note: These answers will give you a 76.2%. 1.Which two statements describe the function of time-division multiplexing? (Choose two.)Multiple data streams share one common channel.Conversations that require extra bandwidth receive any unused time slices. ******Time slots are utilized on a first-come, first-served basis. *****Packets that are sent during transmission are reconstructed at the

CCNA Discovery 4 chapter 5 ver 4.0

2009-11-11T11:28:00.000-08:00

1- Which rule should be followed when implementing the security requirements of a network design?Always use a common security plan for all business needs.As standard practice, lower access restrictions for users if cost is too high.***Avoid reducing security in order to add additional network capabilities.When possible, implement an IDS to protect users from spam.2- What limitations of the 2960

CCNA Discovery 4 chapter 4 ver 4.0d

2009-11-11T11:22:00.000-08:00

1- In addition to the technical considerations, what other major factor is used to evaluate the success of a network installation?final project costsmaintenance costs**user satisfactionstatistics describing the performance of network devices2- Which two network applications are most affected by network congestion and delays? (Choose two.)**IP telephony**live video webcastsaudio file

CCNA Discovery 4 chapter 3 ver 4.0

2009-11-11T11:21:00.000-08:00

1- It is important to identify the details of network sections and devices that will be affected or involved in a new design. This information is included in which section of the Network Design Requirements Document?Project Goal**Project ScopeTechnical RequirementsCurrent State of the Network2- Which two pieces of information does the network designer need to determine if the Cisco IOS of a

CCNA Discovery 4 chapter 2 ver 4.0

2009-11-06T11:33:00.000-08:00

1- During an evaluation of the currently installed network, the IT staffperforms a gap analysis to determine whether the existing network infrastructure cansupport the desired new features. At which stage of the Cisco Lifecycle Servicesapproach does this activity occur?Prepare Phase**Plan PhaseDesign PhaseImplement PhaseOperate PhaseOptimize Phase2- Which stage of the Cisco Lifecycle Services

CCNA Discovery 4 chapter 1 ver 4.0

2009-11-06T11:27:00.000-08:00

1- What are two mechanisms that provide redundancy for server farmimplementations? (Choose two.)host intrusion prevention systemsvirtual private networksnetwork intrusion prevention systems**Rapid Spanning Tree Protocol**Hot Standby Routing Protocol2-The ability to connect securely to a private network over a public network isprovided by which WAN technology?DSLFrame RelayISDNPSTN**VPN3-Which

CCNA Discovery 2 Final exam

2009-10-31T13:00:00.000-07:00

1- A company is developing an Internet store for its website. Which protocol should be used to transfer credit card information from customers to the company web server?*FTPSHTTPHTTPSWEP2TFTP2- Refer to the exhibit. A new branch office has been added to the corporate network and a new router is to be installed to allow branch office users to access the database server at headquarters. How should