The Shareware PLUS Commodore 64 & 128 Blog

New - Black Tapuino V2 Commodore 64 / 128 & VIC-20 datassette emulator

2026-05-01T09:54:00.002+01:00

New - Black Tapuino C2N Digital

The Tapuino is a hardware level Datasette emulator for the Commodore C64, its designed by the team who produced the uCassette. With this device you can load tape images (.TAP files) directly using a microSD card (not included).

The Tapuino supports loading and saving, play/pause, backups from/to tape with LCD display and passthrough port and is fully assembled and tested.

Black Tapuino costs £79 plus postage.

To order simply email sales@sharewareplus.com
Updated 1st May 2026

New - Black Cabless SD2IEC with atmega1284p

2026-05-01T09:44:00.003+01:00

New Black Cableless SD2IEC Interface with atmega1284p as standard.

Simply plugs in to both the cassette port & serial port, no cables at all.

Available from stock, £59 plus postage, email sales@sharewareplus.com

Updated 1st June 2026

New - High Quality SD2IEC Interface for the Commodore 64 and VIC-20

2026-05-01T09:22:00.005+01:00

New high Quality SD2IEC Interface, designed for the Commodore 64 and VIC-20.

The SD2IEC uses the latest Atmega 1284 microcontroller with user-upgradable firmware via SD card. You can use the three buttons for reset, disk forward & disk backward and the internal dip switches for device numbers 8,9,10 & 11.

Supports D64, D71, D81 along with PRG / P00, M2I (older MMC2IEC implementations) and DNP for CMD Native Partition images.

Powered from the Cassette port means there is no power supply needed. Every unit is tested for compatibility and performance. Supports a wealth of file formats, this interface ensures your C64 or VIC-20 runs flawlessly with modern SD media.

New SD2IEC costs £65 plus postage.

We are now out of stock with an expected delivery date of December 2026.

To order simply email sales@sharewareplus.com
Updated 1st October 2026

New - Tapecart SD Reader for Commodore 64

2026-05-01T09:05:00.004+01:00

New - Tapecart SD Reader for Commodore 64

New high-quality Tapecart SD reader, this s the fastest way to load software from a micro SD Card on your Commodore 64.

Housed in a high quality injection moulded case, the Tapecart loads .TCRT and .PRG files at ultra high speeds without any additional hardware, plug-and-play simply insert to your cassette port and go. Forget about fumbling with tiny screens or physical buttons; navigate your entire library with ease using the intuitive built in on-screen browser.

Available from stock. £28 plus postage, to order please email sales@sharewareplus.com

Updated 1st May 2026

New Inline OVP64 - Over Voltage Protector for Commodore 64

2026-05-01T09:00:00.003+01:00

New Inline OVP64 - Over Voltage Protector for Commodore 64

The OVP64 uses ultra-fast MOSFET technology, it continuously monitors the power supply from your PSU to ensure your system remains within safe operating limits.

Original Commodore 64 power supplies are prone to failure, often outputting voltages that exceed the safe 5.40v threshold and causing irreparable damage to sensitive ICs.

The OVP64 acts as a fail-safe, if a voltage spike is detected, it instantly disconnects the electrical supply and activates a red warning LED, protecting your Commodore 64.

Inline OVP64 costs £39 plus postage.

To order simply email sales@sharewareplus.com
Updated 1st May 2026

New batch of dubCRT Cartridge by Datadoor.net

2026-01-13T10:50:00.005+00:00

DUBCRT is a music album, interactive light synthesizer and remix-gadget released as a Commodore 64 cartridge. Designed by the team at Datadoor.net

The dubCRT project is changing, with the possibility of a new release, we have a batch of dubCRT cartridges ready, the cost is £67 plus tracked postage.

To order simply email sales@sharewareplus.com

Updated 13th January 2026

Commodore 64 Tape Pulse Visualizer By BWACK

2025-09-09T10:12:00.004+01:00

Commodore 64 Tape Pulse Visualizer By BWACK

For use with the Azimuth Head Alignment Tape from Interceptor Software and compatible azimuth programs.

Features 60 LEDs displaying real-time short, medium & high length pulses powered by the Arduino Nano v3 micro controller.

Here is a recent indepth review - https://lyonsden.net/c64-tape-pulse-visualizer/

You can find the complete project by BWACK here -
https://github.com/bwack/CommodoreTapePulseVisualizer

Available from stock. £28 plus postage, to order please email sales@sharewareplus.com

Updated May 2026

COMAL 80 Programming Cartridge for the Commodore 64

2025-09-03T07:25:00.001+01:00

COMAL 80 Programming cartridge for the Commodore 64

Welcome to the world of COMAL programming! Many feel that COMAL is close to being an ideal programming language for microcomputers, incorporating as it does the best features of both Basic, Logo and Pascal.

COMAL for the Commodore 64 gives the user full access to the many special facilities which have made the C64 the most popular microcomputer in its class.

Version 2.01 supplied on cartridge with information card with links to resources and complete documentation.

Available from stock. £28 plus postage, to order please email sales@sharewareplus.com

Updated 1st January 2026

Commodore 64 BMC64 Raspberry Pi Interface with GPIO Cable

2025-08-29T17:18:00.001+01:00

Commodore 64 BMC64 Raspberry Pi Interface with GPIO Cable

The BMC64 project utilises a Raspberry Pi to emulate a Commodore 64 and interfaces with original Commodore 64 hardware including the keyboard and joysticks. This interface allows you to use your existing breadbin or slimline case, keyboard, and joysticks with the BMC64 software, providing a modernised version of the classic computer. The BMC64 software itself is based on the VICE emulator, offering low latency and high compatibility.

Includes BMC64 interface with GPIO cable and rubber feet.

Available from stock. £26 plus postage, to order please email sales@sharewareplus.com
Updated 1st October 2026

Freespin By Matthias Kramm - Commodore 1541 Sound & Video Demo

2025-08-24T11:54:00.006+01:00

Freespin By Matthias Kramm

Freespin generates sound using the floppy drive’s stepper motor and video through the serial bus.

With just a Commodore 1541 disk drive, Freespin cable and a standard C64 monitor, you can watch the Freespin demo by Reflex that runs directly from a 1541 disk drive and without a C64.

More on the groundbreaking Freespin demo by Reflex on Matthias Kramm's Blog at -
https://www.quiss.org/freespin/

You can also find a new review on the Lyonsden blog -

https://lyonsden.net/freespin-play-music-video-from-your-1541-drive/

Includes software on floppy disk with custom disk sleeve, Freespin cable & instruction sheet.

Available from stock. £15 plus postage, to order please email sales@sharewareplus.com
Updated 1st January 2026

Commodore 64/128 Datel Robot Interface for Quickshot SVI-2000 Robot Arm

2024-03-08T09:24:00.008+00:00

Commodore 64/128 Datel Robot Interface for Quickshot SVI-2000 Robot Arm.

The Datel Robot Interface allows you to connect your Quickshot SVI-2000 Robot Arm to your Commodore 64 and control its movements with the Robot 2000 software. You can also write your own programs to move the arm, it is very simple to do. Includes Datel Interface & Robot 2000 software for the Commodore 64 (all in German but very easy to follow/use). English version is available for download: https://csdb.dk/release/?id=122345

Please note the Quickshot SVI-2000 Robot Arm is NOT INCLUDED. The Robot Arm is readily available new on ebay.com and used ebay.de.

Datel Interface & Robot 2000 software only, does NOT include the Robot Arm.

New, this made by myself and not vintage. If you have any questions just ask.

Available from stock £40. To order simply email sales@sharewareplus.com

For a great video on the Quickshot Robot arm and this interface see -

https://www.youtube.com/watch?v=DUMy36Ik_C0

Updated 1st January 2026

New - Andy's Utility Cartridge 150101 For the Commodore 64

2024-02-22T12:13:00.002+00:00

Andy's Utility Cartridge 150101 For the Commodore 64
10+ Utilities for the Commodore 64

A new collection of utilities on cartridge for the Commodore 64 -

64 DOCTOR
64 Doctor diagnostic sequence by Computer Software Associates.

64 TESTER
Comprehensive screen, keyboard & joystick port tester by Tim Cannell.

FAST LOADER
Commodore 64 fast disk loader with shortcuts by MR. BYTE.

TURBO NIB COPY
Copy Q turbo nibbler disk copier with error scanner by Cracker & CSS.

DISK TOOL b.S
Disk Tool V6.5 with comprehensive floppy & disk monitors by Klaus Raczel.

CASS.AZIMUTH
Cassette Azimuth for aligning & adjusting your datasette by H Diebek.

HEAD ALIGN
Minimal head alignment v1.1 for your datasette by Enthusi.

1541 ALIGNMENT
Commodore 1541 disk drive track & sector alignment by Antiram

15 SEC FORMAT
Fast 15 second formatter by Mike J. Henry & Alf Maier.

THRUST CONCERT
Music concert featuring Rob Hubbard & Jeremy Smith by Stoat & Tim.

1541 ALPS CHECK
Alps 1541 drive alignment with LED & stepper motor tests by Commodore.

Plus two bonus programs -
F1. TURBO 250
Turbo cassette load & save by Mr Z.

F3. DIAGNOSTICS
Diagnostic Program 324528, by Commodore.

Only £18 plus postage. Available from stock.
Andy's Utility Cart 150101 is supplied boxed, on cartridge with instructions.

Want to read more? Check out this review over at Lyonsden Blog -
https://lyonsden.net/andys-utility-cart-review/

Updated 1st January 2026

New - WiC64 – The Wireless Interface for Commodore 64, 128, 128D & SX-64

2024-02-22T11:26:00.005+00:00

August 2025 to be discontinued, available while stocks last.

The Wireless Interface for the Commodore 64.

The WiC64 is a parallel WLAN interface for Commodore computers with user port connection. In contrast to the earlier modems, the WiC64 works in parallel mode with 8 data lines, 2 handshake lines and one control line. That speeds up data transmission by a factor of 20: speeds of up to 20,480 bytes/second, The WiC64 can load 202 blocks / 50kb in 2.5 seconds from the internet - via HTTP:// or TCP connection.

Run Google Maps on your Commodore - It gives you full access to the internet on your Commodore, with all the possible applications you can imagine. From simple applications such as synchronising the time, loading data and programs from web servers or from PHP scripts to complex chat and messaging systems, Google Maps, online games and lots more.

Comprising a dedicated host board with reset, a pre programmed ESP32, and an LCD display with the device IP and connection status.

The complete hardware and software is open source and supported via a dedicated portal.

The module is supplied with firmware 2.0.0 installed, which can be updated over-the-air (OTA) or via a PC & USB cable.

A comprehensive review by Lyonsden can be found at -
https://lyonsden.net/wic64-review/

£34.95 Plus postage.
Full assembled, programmed and ready to go.

Important note for SX-64 users - The SX-64 user port must be wired correctly, but it is NOT that way from the factory - Commodore has made an error on the board that must be corrected first.

Full information, English & German manual, updates are available at https://wic64.net/web/

Commodore 64 & 128 Joystick Ports - Drop in Plastic Replacements

2023-06-17T12:54:00.010+01:00

Commodore 64 Joystick Ports

We have just received a consignment of spare Commodore 64 Joystick Ports, these are plastic drop in replacements, they do not have a screw holes, but use a push grip/clamp.

Please email for availability.

£3.50 Each plus postage, email sales@sharewareplus.com to order.

Updated 1st March 2026

Commodore 64/128 BlinkingDiag 4-in-1 Diagnostic Module by Tebl

2023-03-25T12:01:00.011+00:00

Commodore 64/128 BlinkingDiag 4-in-1 Diagnostic Module by Tebl

The BlinkenDiag module has been designed to test and diagnose problems with your Commodore 64 & 128, showing the status of the address and data bits with 24 LEDs and the supply voltage on an integrated mini 3-digit LED voltmeter.

Supplied Pre-loaded with 4 diagnostic cartridges -

Commodore 586220 Diagnostic Cartridge
Commodore 781220 Dead Test Cartridge
Commodore ST10 Dead Test Cartridge with extended SID test
World of Jani Commodore 1541 Diagnostic & Test

The BlinkingDiag uses a 28c256, which can be easily erased and programmed with your choice of software (4 slots of 8K) with a suitable programmer (not included), this means you can use it for games, utilities, sound and lots more.

The BlinkingDiag uses three press/locking switches, a reset button and 4 jumpers to configure software and LED modes.

This is based on a project by Tebl - https://github.com/tebl/C64-BlinkenDiag.

If you have any questions just ask.

The BlinkingDiag 4-in1 only £48 plus postage.

To order email sales@sharewareplus.com

Updated 1st October 2026

Commodore 1764 1750 1MB Clone for the Commodore 64 & 128

2023-02-11T14:05:00.008+00:00

1MB REU Clone by Digital Audio Concepts

A quick and easy way to get a 1Mb REU for your Commodore!

Does not include the REC Chip - required to work,

Expand your Commodore's memory by 1 MB with this simple, plug in upgrade!. Designed by the team at Digital Audio Concepts, the 1 MB REU Clone works exactly like a Commodore 1764 or 1750 but with a massive 1MB of RAM!

You will need a Commodore 8726 REC Chip - grab one from a dead REU, off EBay or simply borrow one from a 1764 or 1750 REU, plug it in the PLCC socket and that's it, could not be simpler! Then insert it into your Commodores Expansion/Cartridge port plus the clever design means you wont even need a heavy duty power supply!

You will need a Commodore 8726 REC Chip - its NOT included with this item.

1MB REU Clone £58 plus postage.
Very low stock, to check availability simply email sales@sharewareplus.com

If you have any questions just ask.

Updated 1st August 2025

COMMODORE 64/128 REX 9628 EXTERNAL 8 KERNAL & ROM CARTRIDGE

2023-02-05T20:28:00.007+00:00

NEW - Commodore 64/128 REX 9628 External Kernal & ROM Cartridge PCB

Designed by REX the 9628 allows for up to 8 operating systems and is compatible with REX-DOS, Prologic-DOS, Speed-DOS etc., and has two sockets for 2764 to 27256 (operated as 2x8K to 32K) Eproms.

Rex 9628 External 8 Kernal & ROM cartridge.

£19.95 Plus postage.

For more information please email sales@sharewareplus.com

Available from stock.

Updated 1st January 2025

The Trio Adapter 9595 from Rex Datentechnik for the Commodore 128

2023-02-04T14:25:00.007+00:00

The Trio Adapter 9595 from Rex Datentechnik for the Commodore 128 offers the possibility to operate three operating systems in the Commodore 128 and to select them with a switch.

Rex 9595 Trio Adapter £9.95 Plus postage.

For more information please email sales@sharewareplus.com
Available from stock.

Updated 1st January 2026

REX 9850 CNC Stepper Motor Interface for the Commodore 64

2023-02-04T14:21:00.006+00:00

The Rex 9850 is controlled via software to drive two stepper motors , it is suitable for 4 standard motors with a supply voltage up to 24 V. The outputs are secured separately for each motor with a fine-wire fuse against damage. Includes a detailed instruction sheet with all specifications, writing/connection guide and sample programs so you can include them in your own software, in German but easy to follow.

Rex 9850 CNC Controller £29.95 Plus postage.

For more information please email sales@sharewareplus.com
Available from stock.

Updated 1st January 2025

Commodore 64 VIC-II 8565/8562 to 6569/6567 Adapter by Jari Tulilahti

2023-01-29T09:48:00.009+00:00

This adapter allows you to use a 8565/8562 in place of the 6569/6567.

£6 plus postage, email sales@sharewareplus.com to order.

Available from stock.
Updated 1st October 2025

Replacement for SAFT 40LF220 Memoguard Lithium Battery 3V (CR2032 Holder)

2023-01-28T13:59:00.014+00:00

Replacement for SAFT 40LF220 Memoguard Lithium Battery 3V (CR2032 Holder)

The original 40LF220 Memoguard 3.0V Lithium Encapsulated Cell, manufactured by SAFT are very hard to source, this is a simple, ready to go solution.

It includes the holder & 2032 Lithium 3V battery.

Please Note - Legs are approximately 0.9mm wide and 7.5mm long.
£8 plus postage, email sales@sharewareplus.com to order.

Available from stock.
Updated 1st January 2025

Commodore 64/128 Datel Robot Interface for the Quickshot SVI-2000 Robot Arm

2023-01-07T14:40:00.008+00:00

Commodore 64/128 Datel Robot Interface for Quickshot SVI-2000 Robot Arm

Includes Datel Interface & Robot 2000 software for the Commodore 64 (all in German but very easy to follow/use).

An alternative English version is available for download online on the csdb.dk website with the id=122345.

For a great video on the Quickshot Robot arm and this interface see -
https://www.youtube.com/watch?v=DUMy36Ik_C0

Interface & software only. Available from stock £39.95 plus postage.
To order email sales@sharewareplus.com

Updated 1st March 2025

Low cost Commodore 64 Replacement PLA - PLA20V8 - 906114-01

2022-12-21T12:39:00.015+00:00

We have made a batch of simple, plug in and replace low cost PLA replacements. These replace Commodore Part number 906114-01

These are assembled from a project by Daniël Mantione - https://www.freepascal.org/~daniel/c64pla/

The PLA20V8 is not compatible with the C64C short board or the Commodore 128.

Uses genuine GAL20V8Bs and not Chinese remarks.

Cost is £10 plus postage, available from stock.
Email sales@sharewareplus.com to order.

Updated 1st January 2025

New 2023 build - FM Radio Module For the Commodore 64 & 128 by Timo Voutilainen

2022-11-29T16:20:00.006+00:00

New 2023 build -

FM Radio Module For the Commodore 64 & 128 by Timo Voutilainen

We have given the FM Radio a major make over!

Where to start, we have taken all the elements and combined them on one PCB which plugs directly into the Commodores user port. We now use a telescopic antenna, which can be easily plugged in and out as needed. Plus there is a new daughter board connector.

You can plug in a RTC DS3231 Module to add date and time stamps, the DS3231 uses a CR2032 battery or LIR2032 (Not included). LIR2032 can be recharged automatically by the DS3231. The DS3231 also has onboard storage and can save all your favourite radio stations.

The software has also been updated to include all the latest releases -

AudioEX 2.0
FM RADIO v2.6
FMCD64 v1.0

Plus the new all new GEOS App and the Commodore 128 FM RADIO by Particles BBS.
Sold with permission from Timo Voutilainen & Particles BBS.

Simply plugs in your User Port and you can listen to the radio on your 64 and 128!
Works everywhere, UK, USA, Australia, Europe, etc,

Here is the link to the developers website -
https://sites.google.com/site/dividedbit/home/c64-projects/fm-radio-for-c64
Cd Player requires IDE 64, MP3 Player requires MP3 cart - not included.

Our email address is sales@sharewareplus.com
If you have any questions just ask.

£20 plus Postage.
Updated 1st December 2025

Commodore 64 SID Symphony II/ SID CART for MOS 6581 SID

2022-07-02T17:12:00.005+01:00

Commodore 64 SID Symphony II/ SID CART for MOS 6581 SID Chip

6581 SID Chip is NOT Included - Cartridge PCB as shown.

The SID Symphony II can be mapped into any 32-byte slot from $DE00 to $DFE0, and should be work fine alongside most other hardware expansions. Works with all stereo-aware software that can address a SID in the above range. It is possible to add a jumper to the cartridge to pick up other page address signals inside the computer (such as $D7xx in the C128).

Each board features an access LED, reset button, and a proper 12v DC-to-DC converter for use with the good old 6581 SID chip. Each board comes preset for $DE00, which can be changed by flipping one or more DIP switches. The audio-in line is grounded by default to reduce background noise, which one can undo by simply cutting a jumper pad.

The SID Symphony II is supplied without a SID chip, and is designed to fit into standard Commodore-issue case shells and their clones.

Available from stock £34 plus postage.

Simply email sales@sharewareplus.com

Updated 1st January 2025