The Important Tips On Hacking

Pass Word For Mozilla

2013-09-02T23:30:00.000-07:00

how to keep password for mozilla

1)first click alt button and go to tools

2)and click on options and go to security options there u can see passwords

3)click on master password and type u password

4)after completing that u restart the browser

Windows Live Tags: Pass,Word,Mozilla,password,tools,options,passwords

How To Secure Your Computer

2013-09-02T15:30:00.000-07:00

WiFi v2.0.4

2012-08-09T06:45:00.000-07:00

WiFi v2.0.4

v2.0.4 | 1.8 MB

Who Is On My Wifi - a tool to scan Wifi networks in the presence of unidentified intruders and a PC with your internal network. The utility will show you each computer on the network, and warns you if it detects any bogus connections allows you to protect your network from the drop speed Internet, hackers and computer to which you are not allowed to use your connection.

Are People On Your Network Right Now?

http://www.mediafire.com/?4oe5bvnvbnao98f

Firefox 3x-30x Faster

2012-08-09T06:28:00.000-07:00

Speed Up Firefox 3x-30x Faster

1. Open Firefox

2. Type “about:config” into the address bar and hit return.
Scroll down and look for the following entries:

network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests

Normally the browser will make one request to a web page at a time.
When you enable pipelining it will make several at once, which really speeds up page loading.

3. Alter the entries as follows:

Set “network.http.pipelining” to “true”
Set “network.http.proxy.pipelining” to “true”
Set “network.http.pipelining.maxrequests” to some number like 30.
This means it will make 30 requests at once.

4. Lastly, right-click anywhere and select
New-> Integer.

Name it “nglayout.initialpaint.delay” and set its value to “0?.
This value is the amount of time the browser waits before it acts on information it recieves.

If you’re using a broadband connection you’ll load pages 3-30 times faster now.

2012-07-07T22:31:00.001-07:00

What is port forwarding ?

2012-07-07T22:19:00.000-07:00

Port Forwarding (TUT) Noob Detalied! Hello cyberwarez members,
Ok,in this tut i will show you how to PortForward your IP adress.
Lets get started...
First open : http://portforward.com

Then scroll down and find your router.If you cant find it,then press
"Ctrl+f " and type your ruoter.In my case is TP-Link.
Then click on it.

After that,just click Skip...

Then,scroll a little and you will see "1st SMTP Server" , and click that...

Then it will show you,how to port forward exactly for your ROUTER,but
now i will show for mine :D

Ok,now click "start",then "run",and type cmd!

Now black windows will appear,and you must type "ipconfig",and it will show you some ip adresse's,you must copy ip from "Default Gateway"

After that,open firefox or what ever you have,and type your "Default Gateway" ip.
When you type, it will show you small window to type username and password.Usually password and username are same "admin"..so you type like that.

Then you click "Advance setup"
next,click "NAT" , and click "add"

And than,select "Custome server" , type "CyberGate".
Type your Ip adress from DOS,next type port you want,in my case is 82.
Select Protocol,use both of them,and FINALY click Save/Apply! ;)

And now LAST step.
Open http://canyouseeme.org and type your port (mine is 82) and click "Check"!!
And it will show you just like this:
Success: I can see your service on **.**.**.**:*** on port (82)
Your ISP is not blocking port 82
If its like that,then you are DONE!! congratulations!

But if you have some error,it would look like this:
Error: I could not see your service on **.**.**.**:** on port (82)
Reason: Connection timed out.

What is command Promot ? And List of Commands ?

2012-07-05T07:35:00.003-07:00

To Access, use Run Command

Accessibility Controls
access.cpl

Add Hardware Wizard
hdwwiz.cpl

Add/Remove Programs
appwiz.cpl

Administrative Tools
control admintools

Automatic Updates
wuaucpl.cpl

Bluetooth Transfer Wizard
fsquirt
Calculator
calc

Certificate Manager
certmgr.msc

Character Map
charmap

Check Disk Utility
chkdsk

Clipboard Viewer
clipbrd

Command Prompt
cmd

Component Services
dcomcnfg

Computer Management
compmgmt.msc

Date and Time Properties
timedate.cpl

DDE Shares
ddeshare

Device Manager
devmgmt.msc

Direct X Control Panel (If Installed)*
directx.cpl

Direct X Troubleshooter
dxdiag

Disk Cleanup Utility
cleanmgr

Disk Defragment
dfrg.msc

Disk Management
diskmgmt.msc

Disk Partition Manager
diskpart

Display Properties
control desktop

Display Properties
desk.cpl

Display Properties (w/Appearance Tab Preselected)
control color

Dr. Watson System Troubleshooting Utility
drwtsn32

Driver Verifier Utility
verifier

Event Viewer
eventvwr.msc

File Signature Verification Tool
sigverif
Findfast
findfast.cpl

Folders Properties
control folders
Fonts
control fonts

Fonts Folder
fonts

Free Cell Card Game
freecell

Game Controllers
joy.cpl

Group Policy Editor (XP Prof)
gpedit.msc

Hearts Card Game
mshearts

Iexpress Wizard
iexpress

Indexing Service
ciadv.msc

Internet Properties
inetcpl.cpl
IP Configuration
(Display Connection Configuration)
ipconfig /all
(Display DNS Cache Contents)
ipconfig /displaydns
(Delete DNS Cache Contents)
ipconfig /flushdns
(Release All Connections)
ipconfig /release
(Renew All Connections)
ipconfig /renew
(Refreshes DHCP & Re-Registers DNS)
ipconfig /registerdns
(Display DHCP Class ID)
ipconfig /showclassid
(Modifies DHCP Class ID)
ipconfig /setclassid

Java Control Panel (If Installed)
jpicpl32.cpl

Java Control Panel (If Installed)
javaws

Keyboard Properties
control keyboard

Local Security Settings
secpol.msc

Local Users and Groups
lusrmgr.msc

Logs You Out Of Windows
logoff

Microsoft Chat
winchat

Minesweeper Game
winmine

Mouse Properties
control mouse

Mouse Properties
main.cpl

Network Connections
control netconnections

Network Connections
ncpa.cpl

Network Setup Wizard
netsetup.cpl
Notepad
notepad
Nview Desktop Manager (If Installed)
nvtuicpl.cpl

Object Packager
packager

ODBC Data Source Administrator
odbccp32.cpl

On Screen Keyboard
osk

Opens AC3 Filter (If Installed)
ac3filter.cpl

Password Properties
password.cpl

Performance Monitor
perfmon.msc
perfmon

Phone and Modem Options
telephon.cpl

Power Configuration
powercfg.cpl

Printers and Faxes
control printers

Printers Folder
printers

Private Character Editor
eudcedit

Quicktime (If Installed)
QuickTime.cpl

Regional Settings
intl.cpl

Registry Editor
regedit

Registry Editor
regedit32
Remote Desktop
mstsc
Removable Storage
ntmsmgr.msc

Removable Storage Operator Requests
ntmsoprq.msc

Resultant Set of Policy (XP Prof)
rsop.msc

Scanners and Cameras
sticpl.cpl

Scheduled Tasks
control schedtasks

Security Center
wscui.cpl

Services
services.msc

Shared Folders
fsmgmt.msc

Shuts Down Windows
shutdown

Sounds and Audio
mmsys.cpl

Spider Solitare Card Game
spider

SQL Client Configuration
cliconfg

System Configuration Editor
sysedit

System Configuration Utility
msconfig
System File Checker Utility (Scan Immediately)
sfc /scannow
System File Checker Utility (Scan Once At Next Boot)
sfc /scanonce
System File Checker Utility (Scan On Every Boot)
sfc /scanboot
System File Checker Utility (Return to Default Setting)
sfc /revert
System File Checker Utility (Purge File Cache)
sfc /purgecache
System File Checker Utility (Set Cache Size to size x)
sfc /cachesize=x

System Properties
sysdm.cpl

Task Manager
taskmgr

Telnet Client
telnet

User Account Management
nusrmgr.cpl

Utility Manager
utilman

Windows Firewall
firewall.cpl

Windows Magnifier
magnify

Windows Management Infrastructure
wmimgmt.msc

Windows System Security Tool
syskey

Windows Update Launches
wupdmgr

Windows XP Tour Wizard
tourstart

Wordpad
write

What Is Core i3, Core i5 and Core i7

2012-06-28T07:10:00.000-07:00

Difference between Core i3, Core i5 and Core i7

Intel will stop selling Core 2 Duo and Core 2 Quad in 2010. Core is the new range of Intel processors.

Core i3:
* Entry level processor.
* 2-4 Cores
* 4 Threads
* Hyper-Threading (efficient use of processor resources)
* 3-4 MB Catche
* 32 nm Silicon (less heat and energy)

Core i5:
* Mid range processor.
* 2-4 Cores
* 4 Threads
* Turbo Mode (turn off core if not used)
* Hyper-Threading (efficient use of processor resources)
* 3-8 MB Catche
* 32-45 nm Silicon (less heat and energy)

Core i7:
* High end processor.
* 4 Cores
* 8 Threads
* Turbo Mode (turn off core if not used)
* Hyper-Threading (efficient use of processor resources)
* 4-8 MB Catche
* 32-45 nm Silicon (less heat and energy)

Google Tricks

2012-06-28T07:01:00.000-07:00

Looking for the ultimate tips for Google searching? You've just found the only guide to Google you need. Let's get started:
1. The best way to begin searching harder with Google is by clicking the Advanced Search link.
2. This lets you search for exact phrases, "all these words", or one of the specified keywords by entering search terms into the appropriate box.
3. You can also define how many results you want on the page, what language and what file type you're looking for, all with menus.
4. Advanced Search lets you type in a Top Level Domain (like .co.uk) in the "Search within site of domain" box to restrict results.
5. And you can click the "Date, usage rights, numeric range and more" link to access more advanced features.
6. Save time – most of these advanced features are also available in Google's front page search box, as command line parameters.
7. Google's main search invisibly combines search terms with the Boolean construct "AND". When you enter smoke fire – it looks for smoke AND fire.
8. To make Google search for smoke or fire, just type smoke OR fire
9. Instead of OR you can type the | symbol, like this: smoke | fire
10. Boolean connectors like AND and OR are case sensitive. They must be upper case.
11. Search for a specific term, then one keyword OR another by grouping them with parentheses, like this: water (smoke OR fire)
12. To look for phrases, put them in quotes: "there's no smoke without fire"
13. Synonym search looks for words that mean similar things. Use the tilde symbol before your keyword, like this: ~eggplant
14. Exclude specific key words with the minus operator. new pram -ebay excludes all results from eBay.
15. Common words, like I, and, then and if are ignored by Google. These are called "stop words".
16. The plus operator makes sure stop words are included. Like: fish +and chips
17. If a stop word is included in a phrase between quote marks as a phrase, the word is searched for.
18. You can also ask Google to fill in a blank. Try: Christopher Columbus discovered *
19. Search for a numerical range using the numrange operator. For example, search for Sony TV between £300 and £500 with the string Sony TV £300..£500
20. Google recognises 13 main file types through advanced search, including all Microsoft Office Document types, Lotus, PostScript, Shockwave Flash and plain text files.
21. Search for any filetype directly using the modifier filetype:[filetype extension]. For example: soccer filetype:pdf
22. Exclude entire file types, using the same Boolean syntax we used to exclude key words earlier: rugby -filetype:doc
23, In fact, you can combine any Boolean search operators, as long as your syntax is correct. An example: "sausage and mash" -onions filetype:doc
24. Google has some very powerful, hidden search parameters, too. For example "intitle" only searches page titles. Try intitle:herbs
25. If you're looking for files rather than pages – give index of as the intitle: parameter. It helps you find web and FTP directories.
26. The modifier inurl only searches the web address of a page: give inurl:spices a go.
27. Find live webcams by searching for: inurl:view/view.shtml
28. The modifier inanchor is very specific, only finding results in text used in page links.
29. Want to know how many links there are to a site? Try link:sitename – for example link:www.mozilla.org
30. Similarly, you can find pages that Google thinks are related in content, using the related: modifier. Use it like this: related:www.microsoft.com
31. The modifier info:site_name returns information about the specified page.
32. Alternatively, do a normal search then click the "Similar Pages" link next to a result.
33. Specify a site to search with the site: modifier – like this: search tips site:www.techradar.com
34. The above tip works with directory sites like www.dmoz.org and dynamically generated sites.
35. Access Google Directory – a database of handpicked and rated sites – at directory.google.com
36. The Boolean operators intitle and inurl work in Google directory, as does OR.
37. Use the site: modifier when searching Google Images, at images.google.com. For example: dvd recorder site:www.amazon.co.uk
38. Similar, using "site:.com" will only return results from .com domains.
39. Google News (news.google.com) has its own Boolean parameters. For example "intext" pulls terms from the body of a story.
40. If you use the operator "source:" in Google News, you can pick specific archives. For example: heather mills source:daily_mail
41. Using the "location:" filter enables you to return news from a chosen country. location:uk for example.
42. Similarly, Google Blogsearch (blogsearch.google.com) has its own syntax. You can search for a blog title, for example, using inblogtitle:
43. The general search engine can get very specific indeed. Try movie: to look for movie reviews.
44. The modifier film: works just as well!
45. Enter showtimes and Google will prompt you for your postcode. Enter it and it'll tell you when and where local films are showing.
46. For a dedicated film search page, go to www.google.co.uk/movies
47. If you ticked "Remember this Location" when you searched for show times, the next time you can enter the name of a current film instead.
48. Google really likes movies. Try typing director: The Dark Knight into the main search box.
49. For cast lists, try cast: name_of_film
50. The modifier music: followed by a band, song or album returns music reviews.
51. Try searching for weather London – you'll get a full 4-day forecast.
52. There's also a built-in dictionary. Try define: in the search box.
53. Google stores the content of old sites. You can search this cache direct with the syntax keyword cache:site_url
54. Alternatively, enter cache:site_url into Google's search box to be taken direct to the stored site.
55. No calculator handy? Use Google's built in features. Try typing 12*15 and hitting "Google Search".
56. Google's calculator converts measurements and understands natural language. Type in 14 stones in kilos, for example.
57. It does currency conversion too. Try 200 pounds in euros
58. If you know the currency code you can type 200 GBP in EUR instead for more reliable results.
59. And temperature! Just type: 98 f to c to convert Fahrenheit to Centigrade.
60. Want to know how clever Google really is? Type 2476 in roman numerals, then hit "Google Search"...
61. You can personalise your Google experience by creating a Google account. Go to www.google.com/account/ then click "Create Account".
62. With a Google account there are lots more extras available. You'll get a free Gmail email account for one...
63. With your Google account, you can also personalise your front page. Click "iGoogle" to add blog and site feeds.
64. Click "Add a Tab" in iGoogle to add custom tabs. Google automatically populates them with suitable site suggestions.
65. iGoogle allows you to theme your page too. Click "Select Theme" to change the default look.
66. Some iGoogle themes change with time..."Sweet Dreams" is a theme that turns from day to night as you browse.
67. Click "More" under "Try something new" to access a full list of Google sites and new features.
68. "Custom Search" enables you to create a branded Google search for your own site.
69. An active, useful service missing from the list is "Personalised Search" – but you can access it via www.google.com/psearch when you're logged in.
70. This page lists searches you have recently made – and is divided into categories. Clicking "pause" stops Google from recording your history.
71. Click "Trends" to see the sites you visit most, the terms you enter most often and links you've clicked on!
72. Personalised Search also includes a bookmark facility – which enables you to save bookmarks online and access them from anywhere.
73. You can add bookmarks or access your bookmarks using the iGoogle Bookmarks gadget.
74. Did you know you can search within your returned results? Scroll down to the bottom of the search results page to find the link.
75. Search locally by appending your postcode to the end of query. For example Indian food BA1 2BW finds restaurants in Bath, with addresses and phone numbers!
76. Looking for a map? Just add map to the end of your query, like this: Leeds map
77. Google finds images just as easily and lists them at the top, when you add image to the end of your search.
78. Google Image Search recognises faces... add &imgtype=face to the end of the returned URL in the location bar, then hit enter to filter out pictures that aren't people.
79. Keeping an eye on stocks? Type stocks: followed by market ticker for the company and Google returns the data from Google Finance.
80. Enter the carrier and flight number in Google's main search box to return flight tracking information.
81. What time is it? Find out anywhere by typing time then the name of a place.
82. You may have noticed Google suggests alternate spellings for search terms – that's the built in spell checker!
83. You can invoke the spell checker directly by using spell: followed by your keyword.
84. Click "I'm Feeling Lucky" to be taken straight to the first page Google finds for your keyword.
85. Enter a statistics-based query like population of Britain into Google, and it will show you the answer at the top of its results.
86. If your search has none-English results, click "Translate this Page" to see it in English.
87. You can search foreign sites specifically by clicking "Language Tools", then choosing which countries sites to translate your query to.
88. Other features on the language tools page include a translator for blocks of text you can type or cut and paste.
89. There's also a box that you can enter a direct URL into, translating to the chosen language.
90. Near the language tools link, you'll see the "Search Preferences". This handy page is full of secret functionality.
91. You can specify which languages Google returns results in, ticking as many (or few) boxes as you like.
92. Google's Safe Search protects you from explicit sexual content. You can choose to filter results more stringently or switch it off completely.
93. Google's default of 10 results a page can be increased to up to 100 in Search Preferences, too.
94. You can also set Google to open your search results in a new window.
95. Want to see what others are searching for or improve your page rank? Go to www.google.com/zeitgeist
96. Another useful, experimental search can be found at www.google.com/trends – where you can find the hottest search terms.
97. To compare the performance of two or more terms, enter them into the trends search box separated by commas.
98. Fancy searching Google in Klingon? Go to www.google.com/intl/xx-klingon
99. Perhaps the Swedish chef from the muppets is your role model instead? Check www.google.com/intl/xx-bork
100. Type answer to life, the universe and everything into Google. You may be surprised by the result...
101. It will also tell you the number of horns on a unicorn

Madagascar 3 (Mediafire Links)400mb

2012-06-18T07:15:00.001-07:00

http://www.mediafire.com/?3zatak2s5a92iab
http://www.mediafire.com/?wp83g7r8ju21w4c

Hack A Closed Pc On Cyber Cafe

2012-06-14T08:32:00.000-07:00

here is a quick new hack on how to intrude in the PC which is shut downed at Cyber cafe. (Don’t Forget to read our disclaimer at the bottom of the post.)

1. As you all must have know these days all Cyber cafe owners have a program for administration to control all PC’s in local area network. So all files can be inter transmitted.

2. First of all press Ctrl+Alt+Del the task manager or any controlling application, will open. Then from APPLICATIONS select the program that is controlling all PC’s & terminate it, This is for security reason. Now log of PC, & you ll get user names of the PC.

3. But some times, cyber cafes have security clients installed that have restricted access to Task Manager

, restart the computer & press F8 continuously before windows boots.

The Menu will open, select Safe Mode from it. And now you can copy files from networked PC’s without any security layer.

Next step is where you’ll need to crack the hashes. SO go to your home PC , Download & install Saminside cracking tool. And from some another Cyber cafe try to crack the hashes of that PC. By same log off method explained below.

This where you actually perform hacking. Have a gret time & tell us weather it worked for you.

Meanwhile if you can get IP address, of the PC you wish to hack try to get it from ip-explorer.com, but this is not the part of this hack its sort of next step of hacking from outside the network.

Disclaimer : The trick here explained it for educational purpose only & not to perform illegal or criminal activities. Don’t forget hacking into some one’s privacy is considered as crime. SO do it on your home network that you own or something. We are not responsible for anything you do & consequences of it by using our articles.

What is Telnet Forge Email

2012-06-14T08:29:00.002-07:00

Want a computer you can telnet into and mess around with, and not get into trouble no matter what you do to it? I've set up my
techbroker.com (206.61.52.33) with user xyz, password guest for you to play with. Here's how to forge email to xyz@techbroker.com using
telnet. Start with the command:

C:\>telnet techbroker.com 25
Connecting To Techbroker.com

220 Service ready

Now you type in who you want the message to appear to come from:

helo santa@techbroker.com
Techbroker.com will answer:

250 host ready

Next type in your mail from address:

mail from:santa@techbroker.com

250 Requested mail action okay, completed

Your next command:

rcpt to:xyz@techbroker.com
250 Requested mail action okay, completed

Your next command:
data
354 Start main input; end with .

Newbie note: just means hit return. In case you can't see that little period between the s, what you do to end composing your email is to hit enter, type a period, then hit enter again.

Anyhow, try typing:

This is a test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel

Connection to host lost.

Using techbroker's mail server, even if you enable full headers, the
message we just composed looks like:

Status: R
X-status: N

This is a test.

That's a pretty pathetic forged email, huh? No "from", no date.
However, you can make your headers better by using a trick with the data command. After you give it, you can insert as many headers as you choose. The trick is easier to show than explain:

220 Service ready
helo santa@northpole.org
250 host ready
mail from:santa@northpole.com
250 Requested mail action okay, completed
rcpt to:
250 Requested mail action okay, completed
data
354 Start main input; end with .
from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.
.
250 Requested mail action okay, completed
quit
221 Service closing transmission channel

Connection to host lost.

The message then looks like:

from:santa@deer.northpole.org
Date: Mon, 21 Oct 2002 10:09:16 -0500
Subject: Rudolf
This is a Santa test.

The trick is to start each line you want in the headers with one word
followed by a colon, and the a line followed by "return". As soon as
you write a line that doesn't begin this way, the rest of what you
type goes into the body of the email.

Notice that the santa@northpole.com from the "mail from:" command didn't show up in the header. Some mail servers would show both "from" addresses.

You can forge email on techbroker.com within one strict limitation.
Your email has to go to someone at techbroker.com. If you can find any way to send email to someone outside techbroker, let us know, because you will have broken our security, muhahaha! Don't worry, you have my permission.

Next, you can read the email you forge on techbroker.com via telnet:

C:\>telnet techbroker.com 110

+OK <30961.5910984301@techbroker.com> service ready

Give this command:
user xyz
+OK user is known

Then type in this:
pass test
+OK mail drop has 2 message(s)

retr 1
+OK message follows
This is a test.

If you want to know all possible commands, give this command:

help
+OK help list follows
USER user
PASS password
STAT
LIST [message]
RETR message
DELE message
NOOP
RSET
QUIT
APOP user md5
TOP message lines
UIDL [message]
HELP

Unless you use a weird online provider like AOL, you can use these
same tricks to send and receive your own email. Or you can forge email to a friend by telnetting to his or her online provider's email
sending computer(s).

You should know to Secure your computer from getting hacked

2012-06-04T05:51:00.000-07:00

you should know to Secure your computer from getting hacked by some.Remember if you follow these guidelines it will be extremely difficult for a hacker to enter into your pc and to hack your data.As today everything from banking,business,studies etc is online so the threat of being hacked is becoming more and more dangerous.Ok,so listed below are the steps you should follow

Do Not Disclose Your IP Address

This the biggest mistake you could ever do.Never Disclose your IP address to anybody because ip address is the address of your computer.Once the hacker knows the address of your computer it will be easy for him Enter into your home(computer) and steal your accessories ( data and passwords).

Do Not Download any Suspcious Software or Attachments

A lot of people search for cracks and keygens online.Remember this is most exploited method used by the hackers to hack into the pc(personal computer).They usually attach a keylogger or virus with the crack or the keygen.Once you download and install it then your data will be automatically sent to the hacker without your permission.And this might lead to a disaster if you are a online business man because your sensitive information such as paypal account information,e-mail account information can be sent to the hackers.

Use Good Antivirus And Firewall Program

Do not depend upon windows firewall to protect yourself from online hackers.It is always a wise decision to use a good firewall program and do install a good antivirus program.If you dont have enough money right now go for the free antivirus and firewall program but make sure that you have a updated antivirus and a firewall
installed on your computer.

Use Secure Passwords (3D passwords)

Always use 3D passwords to protect your accounts from getting hacked.Your password must contain digits,special symbols like underscore( _ ) and characters.Do not use small passwords.Your password should be at least eight characters long in length.

Always logout From Your Accounts

You should always logout from your accounts instead of closing the browser window directly because whenever you login into your account a cookie is placed by the server into your account and when you logout this cookie is deleted.If you do not logout and the cookie is not deleted the hacker might gain access to this cookie and then he would be able to login into your account from his pc.

Make backup Of Your Data

Some viruses are made to destory your data so it is always advisable to store your data in a backup file.various good data backup programs are available on the internet.

What is Computer Hacking

2012-06-04T05:50:00.000-07:00

Computer hacking is the practice of modifying computer hardware and software to accomplish a goal outside of the creator’s original purpose. People who engage in computer hacking activities are often called hackers. Since the word “hack” has long been used to describe someone who is incompetent at his/her profession, some hackers claim this term is offensive and fails to give appropriate recognition to their skills.

Computer hacking is most common among teenagers and young adults, although there are many older hackers as well. Many hackers are true technology buffs who enjoy learning more about how computers work and consider computer hacking an “art” form. They often enjoy programming and have expert-level skills in one particular program. For these individuals, computer hacking is a real life application of their problem-solving skills. It’s a chance to demonstrate their abilities, not an opportunity to harm others.

Since a large number of hackers are self-taught prodigies, some corporations actually employ computer hackers as part of their technical support staff. These individuals use their skills to find flaws in the company’s security system so that they can be repaired quickly. In many cases, this type of computer hacking helps prevent identity theft and other serious computer-related crimes.

Computer hacking can also lead to other constructive technological developments, since many of the skills developed from hacking apply to more mainstream pursuits. For example, former hackers Dennis Ritchie and Ken Thompson went on to create the UNIX operating system in the 1970s. This system had a huge impact on the development of Linux, a free UNIX-like operating system. Shawn Fanning, the creator of Napster, is another hacker well known for his accomplishments outside of computer hacking.

In comparison to those who develop an interest in computer hacking out of simple intellectual curiosity, some hackers have less noble motives. Hackers who are out to steal personal information, change a corporation’s financial data, break security codes to gain unauthorized network access, or conduct other destructive activities are sometimes called “crackers.” This type of computer hacking can earn you a trip to a federal prison for up to 20 years.

If you are interested in protecting your home computer against malicious hackers, investing in a good firewall is highly recommended. It’s also a good idea to check your software programs for updates on a regular basis. For example, Microsoft offers a number of free security patches for its Internet Explorer browser.

Tricks On Windows Xp

2012-06-04T05:47:00.001-07:00

Some Tips And Tricks For Your Windows XP

STOP NOISE IN COPYING AUDIO CD
When using 3rd party burning software (eg, Nero Burning Rom) to copy audio CD,some noise may be heard at the end of each track. To prevent this,try the following method:
1. Enter System Properties\device manager
2. Select IDE ATA/ATAPI controllers
3. Double click on thee CD writer IDE channel
4. Select advance setting
5. Change the transfer mode to 'PIO Only'
6. Restart Computer

DISABLING THE 'UNSIGNED DRIVER' DIALOGS
This option wll disable the screen wich keeps popping up when you try to install 'digitally unsigned drivers'. Normally you can choose to continue the install anyways, but I have had situations where you cannot continue the install.. very annoying.. This is how to fix it:
Click Start - Run
then type: gpedit.msc
then hit enter.
Browse the folder tree to the following location:
User Configuration - Administrative Templates - System
now right-click Code signing for Device drivers and select Properties.
On the Settings tab, either select
- enable, and then select ignore from the appearing listbox..
- or click the disable option. Click apply and Ok and your set!
Alternatively especially for XP Home users:
Open "System" properties (Windows key + pause or Right click 'My Computer' - properties or Control Panel - System).On the Hardware tab click the "Driver Signing" button. In the dialogue that comes up choose "Ignore" to install the new driver anyway.

DMA MODE ON IDE DEVICES VIEWS
Just like Windows 2000, Windows XP still fails to set the DMA mode correctly for the IDE device designated as the slaves on the primary IDE and secondary IDE channels. Most CD-ROMS are capable of supporting DMA mode, but the default in XP is still PIO. Setting it to DMA won't make your CD-ROM faster, but it will consume less CPU cycles. Here's how:
1. Open the Device Manager. One way to do that is to right click on "My Computer", select the Hardware tab, and Select Device Manager.
2. Expand "IDE ATA/ATAPI Controllers" and double-click on "Primary IDE Channel"
3. Under the "Advanced Settings" tab, check the "Device 1" setting. More than likely, your current transfer mode is set to PIO.
4. Set it to "DMA if available".
Repeat the step for the "Secondary IDE Channel" if you have devices attached to it. Reboot.

RESTORING MEDIA PLAYER
To restore Windows Media Player insert the the XP CD into the CD drive (if it autostarts click exit). Open a command window and type the following :
rundll32.exe setupapi,InstallHinfSection InstallWMP7 132 c:\windows\inf\wmp.inf

RESTORING ACCESS TO CD ROM'S
If you removed CD Burning software, or for some other mystical reason, can not longer access your CD ROM's, in most cases following registry keys needs to be deleted: Locate and delete the UpperFilters and LowerFilters values under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

DELETING THE INDEX.DAT
Del "C:\Documents and Settings\aeon\Local Settings\Temporary Internet Files\Content.IE5\index.dat"

CONTROL PANEL ON THE DESKTOP.
On The Desktop, Right Click Your Mouse Then Choose "New | Folder". Name The Folder As "ControlPanel. {21EC2020-3AEA-1069-A2DD-08002B30309D}" Without The "Quote Things. And Now You Can Access The Control Panel More Faster Then Before.

CHANGING INTERNET EXPLORER ICON NAME.
Open Registry Editor Then Go To : "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CLSID". You Can See A Few Key Below It.

Now Go To This Key {871C5380-42A0-1069-A2EA-08002B30309D}, Double Click At The Default Value On The Right, Enter Whatever Name You Like.

REMOVING USERNAME IN THE STARTMENU
Open Registry Editor Then Go To : "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer".
On The Right, Make A New Entry With Right Click On Your Mouse Then Choose "New | DWORD Value" Change The Entry's Name Into "NoUserNameInStartMenu", Double Click In The New Entry And Fill The "Value Data" With "1". Press OK, Exit From The Registry Editor. Restart Your Computer.

INTERNET EXPLORER LIGHTING-FAST STARTUP.
Isn't it annoying when you want to go to a new website, or any other site but your homepage, and you have to wait for your 'home' to load? This tweak tells Internet Explorer to simply 'run', without loading any webpages. (If you use a 'blank' page, that is still a page, and slows access. Notice the 'about:blank' in the address bar. The blank html page must still be loaded..). To load IE with 'nothing' [nothing is different than blank]:
1. Right-click on any shortcut you have to IE
[You should create a shortcut out of your desktop IE icon, and delete the original icon]
2. Click Properties
3. Add ' -nohome' [with a space before the dash] after the endquotes in the Target field.
4. Click OK
Fire up IE from your modified shortcut, and be amazed by how fast you are able to use IE!

INTERNET EXPLORER SPEED UP.
Edit your link to start Internet Explorer to have -nohome after it. For Example: "C:\Program Files\Internet Explorer\IEXPLORE.EXE" -nohome
This will load internet explorer very fast because it does not load a webpage while it is loading. If you want to go to your homepage after it is loaded, just click on the home button.

SPEED UP BROWSING WITH DNS CATCH.
when you connect to a web site your computer sends information back and forth, this is obvious. Some of this information deals with resolving the site name to an IP address, the stuff that tcp/ip really deals with, not words. This is DNS information and is used so that you will not need to ask for the site location each and every time you visit the site. Although WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall performance by increasing its size. You can do this with the registry entries below:
************begin copy and paste***********
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]
"CacheHashTableBucketSize"=dword:00000001
"CacheHashTableSize"=dword:00000180
"MaxCacheEntryTtlLimit"=dword:0000fa00
"MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. Then copy and paste the above into it and save it. Then merge it into the registry.

START IEXPLORER WITH EMPTY BLUE SCREEN.
Set your default page to about:mozilla and IE will show a nice blue screen upon startup.

SPEED UP DETAILED VIEW IN WINDOWS EXPLORER.
If you like to view your files in Windows Explorer using the "Details" view here is a tweak to speed up the listing of file attributes: Viewing files in Windows Explorer using the "Details" mode shows various attributes associated with each file shown. Some of these must be retrieved from the individual files when you click on the directory for viewing. For a directory with numerous and relatively large files (such as a folder in which one stores media, eg: *.mp3's, *.avi's etc.)

Windows Explorer lags as it reads through each one. Here's how to disable viewing of unwanted attributes and speed up file browsing:
1. Open Windows Explorer
2. Navigate to the folder which you wish to optimize.
3. In "Details" mode right click the bar at the top which displays the names of the attribute columns.
4. Uncheck any that are unwanted/unneeded.
Explorer will apply your preferences immediately, and longs lists of unnecessary attributes will not be displayed. Likewise, one may choose to display any information which is regarded as needed, getting more out of Explorer.

WEB PAGES SLOWS DOWN, FIX.
The tweak is simple. Beside the QoS and others around the Internet for the new XP OS, I found out that native drivers sometimes slow you down (cable and xDSL users). So if you have applied all tweaks and you are still having slow downs try reinstalling your NICs drivers. The difference is noticeable. My web pages now load almost instantly where they used to take even a minute!

FIX IE 6 SLOWDOWNS AND HANGS.
1. Open a command prompt window on the desktop (Start/Run/command).
2. Exit IE and Windows Explorer (iexplore.exe and explorer.exe, respectively, in Task Manager, i.e - Ctrl-Alt-Del/Task Manager/Processes/End Process for each).
3. Use the following command exactly from your command prompt window to delete the corrupt file:
C:\>del "%systemdrive%\Documents and Settings\%username%\Local
Settings\Temporary Internet Files\Content.IE5\index.dat"
4. Restart Windows Explorer with Task Manager (Ctrl-Alt-Del/Task Manager/Applications/New Task/Browse/C:\Windows\explorer.exe[or your path]) or Shutdown/Restart the computer from Task Manager.

SPEED UP WEB BROWSING.
Iv'e personally found a dramatic increase in web browsing after clearing the Windows XP DNS cache. To clear it type the following in a command prompt: ipconfig /flushdns.

ALLOW MORE THAN 2 SIMULTANEOUS DOWNLOADS ON IEXPLORER 6.
This is to increase the the number of max downloads to 10.
1. Start Registry Editor (Regedt32.exe).
2. Locate the following key in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
3. On the Edit menu, click Add Value , and then add the following registry values:
"MaxConnectionsPer1_0Server"=Dword:0000000a
"MaxConnectionsPerServer"=Dword:0000000a
4. Quit Registry Editor.

IPV6 INSTALLATION FOR WINDOWS XP.
This protocol is distined to replace the Internet Protocal Version 4 used by Internet Explorer it uses hexadecimal ip addresses instead of decimal example (decimal ip 62.98.231.67) (hexadecimal IP 2001:6b8:0:400::70c)
To install To install the IPv6 Protocol for Windows XP:
Log on to the computer running Windows XP with a user account that has local administrator privileges. Open a command prompt. From the Windows XP desktop, click Start, point to Programs, point to Accessories, and then click Command Prompt. At the command prompt, type: ipv6 install
For more information on IPv6, visit the site below:
CODE
http://www.microsoft.com/windowsxp/pro/techinfo/administration/ipv6/default.asp

ANOTHER WAY TO FIX IEXPLORER 6 SLOW PAGES LOADED.
Here's an easier way to get to index.dat file as addresse in another tweak submitted here.
1. click on Internet Explorer
2. go to to your root dir (usually C:)
3. open Documents and Settings folder
4. open "your username folder"
5. open UserData
6. **close IE if you have it open**
rename index.dat to index.old
logoff and log back on (don't need to restart) open up IE and go to a web page or site that always seemed to load slowly. It should load a lot more quickly now. NOTE. Always rename or backup .dat or other system files before deleting.

EASY WAY TO ADD THE ADMINISTRATOR USER TO THE WELCOME SCREEN.
Start the Registry Editor Go to:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList \
Right-click an empty space in the right pane and select New > DWORD Value Name the new value Administrator. Double-click this new value, and enter 1 as it's Value data. Close the registry editor and restart.

DRIVE ICONS.
To set the icon of any drive (hard disk, cd rom or anything else) with a letter (C:\ etc.), run REGEDIT (Start -> Run -> regedit)
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer
If one doesn't already exist, create a new KEY called "DriveIcons". Under this key, create a new key with the letter of your drive. I.e. C for your C:\ drive.
To change the icon for that drive, create a key inside that one called DefaultIcon and set the path of (Default) to the location of your icon
eg C\DefaultIcon\ then (Default) = D:\Documents\C Drive Icon.ico
To change the name of that drive, create a key in the drive letter one (eg C\) called DefaultLabel and set the (Default) to what you want the drive to be called. This is useful if you want to assign a long name to the floppy drive.

CHANGING OEM REGISTRATIONS.
Have you used someone's new Hewlet Packard with their OEM version of Windows XP? You've seen that HP has their own icon in the Start Menu, underneath Run, that goes to their Help Site. Now, you can have your icon that does anything you want (website, program, etc) and says anything you want. Basically, you are "branding" Windows XP (Home or Pro), great for if you are a computer builder and sell them, or you just want to make Windows XP your own. It involves Regedit.
1. Start up Notepad and creat a new registry file (*.reg) and copy and paste the following into it:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}]
@="YOUR COMPANY NAME"
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\DefaultIcon]
@="YOUR ICON HERE"
00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,68,00,70,00,6c,00,69,00,\
6e,00,6b,00,2e,00,69,00,63,00,6f,00,00,00
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\InProcServer32]
@=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\
00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,73,00,68,00,\
64,00,6f,00,63,00,76,00,77,00,2e,00,64,00,6c,00,6c,00,00,00
"ThreadingModel"="Apartment"
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\Instance]
"CLSID"="{3f454f0e-42ae-4d7c-8ea3-328250d6e272}"
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\Instance\InitPropertyBag]
"CLSID"="{13709620-C279-11CE-A49E-444553540000}"
"method"="ShellExecute"
"Command"="YOUR TITLE HERE"
"Param1"="YOUR FUNCTION HERE"
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\shellex]
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\shellex\ContextMenuHandlers]
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\shellex\ContextMenuHandlers\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}]
@=""
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\shellex\MayChangeDefaultMenu]
@=""
[HKEY_CLASSES_ROOT\CLSID\{2559a1f6-21d7-11d4-bdaf-00c04f60b9f0}\ShellFolder]
"Attributes"=dword:00000000
2. Edit where it says YOUR ICON HERE to a path to an icon (ex. c:\\icon.ico), it must be 24x24 pixels and in *.ico format. Use double back slash for path names.
3. Edit both places where it says YOUR TITLE HERE to what you want it to say in the Start Menu (ex. Elranzer Homepage).
4. Edit where it says YOUR FUNCTION here to what you want it to do when you click it, it can be anything... your website, a local HTML document, a program, a Windows funtion, whatever your imagination can provide (ex. http://www.shareordie.com).
5. Save this file as brand.reg, double-click it to enterin your information, and refresh Explorer (log off/on) to see it in the Start Menu!! This works in both Home and Professional (and probably 64-Bit Professional) Editions!

ORIGINAL WALLPAPERS.
This is more of a fun tweak than it is useful. Go to run, type regedit press ok. when that comes up go to HKEY_CURRENT_USER>Control Panel>Desktop
Now find the orginalwallpaper, right click and select modify.In the text box type the path to the file you want to be your orginal desktop wallpaper.

DELETING My eBooks AND SPECIALS FOLDER IN MY DOCUMENTS.
Click Start, then Run and type: regsvr32 /u mydocs.dll
then delete them.

DISABLE WINDOWS PICTURE AND FAX VIEWER.
By default, Windows XP opens all picture files (gif,jpg,...) with the included Windows Picture and Fax Viewer no matter what other picture viewers you have installed. To disable the Windows Picture and Fax Viewer, unregister shimgvw.dll. This can be done from command prompt: regsvr32 /u shimgvw.dll

REMOVE PAST ITEMS ICONS IN TASKBAR.
Some times When you check your TasKbar properties or when you hide or unhide icons you can see old icons from Uninstalled or old programs you dont have anymore. This Tweak will help you how to get rid of this problem Thanks to leobull of Xperience.or How To clear the Past Items or Icons list in the TaskBar, perform the following steps:
1.Open Regedit Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TrayNotify
2.Delete the IconStreams and PastIconsStream values
3.Open Task Manager, click the Processes tab, click Explorer.exe , and then click End Process .
4.In Task Manager, click File , click New Task , type explorer , and then click OK .

LOCKING COMPUTERS.
To lock a computer in XP, as you probably know, you press "L" while holding down "Windows Logo" key on your keyboard. However, if you would like to lock a computer remotely, for example via "Remote Administrator", you don't have this ability. What you can do instead, is to create a shortcut on remote computer's desktop where Target %windir%\System32\rundll32.exe user32.dll,LockWorkStation Start In %windir%

ADMINISTRATOR IN WELCOME SCREEN.
When you install Windows XP an Administrator Account is created (you are asked to supply an administrator password), but the "Welcome Screen" does not give you the option to log on as Administrator unless you boot up in Safe Mode.
First you must ensure that the Administrator Account is enabled:
1 open Control Panel
2 open Administrative Tools
3 open Local Security Policy
4 expand Local Policies
5 click on Security Options
6 ensure that Accounts: Administrator account status is enabled Then follow the instructions from the "Win2000 Logon Screen Tweak" ie.
1 open Control Panel
2 open User Accounts
3 click Change the way users log on or log off
4 untick Use the Welcome Screen
5 click Apply Options
You will now be able to log on to Windows XP as Administrator in Normal Mode.

BUGFIXES.
This is a strange bug in Windows XP Pro but it can and does happen to everyone. When you open the My Computer screen and your Documents folder is missing but all the other users folders are there try this tweak.
STEP 1:
START > RUN > REGEDIT > HKEY_LOCAL_MACHINE / Software / Microsoft / Windows / Current Version / Explorer / DocFolderPaths
Once you click the DocFolderPaths folder you should see all the user's folders.
STEP 2:
Add a new string value
Value Name: your user name
Value Data: the path to your docs folder ( ex. C:\Documents and Settings\your docs folder )
Exit Registry editor and open my computer, your docs folder should now be visable.

MOUSE POINTERS.
It seems that even without pointer precision disabled, the mouse under XP is still influenced by an acceleration curve. This is especially noticeable in games. To

completely remove mouse acceleration from XP, you will need to go into the registry and adjust the SmoothmouseXYCurve values. Here is how its done.
1. Click Start button
2. Select Run
3. Type 'regedit' in the open textbox
4. Open the tree 'HKEY_CURRENT_USER', select control panel, then select mouse
5. Right clicking, modify the SmoothMouseXCurve and SmoothMouseYCurve hexidecimal values to the following:
SmoothMouseXCurve:
00,00,00,00,00,00,00,00
00,a0,00,00,00,00,00,00
00,40,01,00,00,00,00,00
00,80,02,00,00,00,00,00
00,00,05,00,00,00,00,00
SmoothMouseYCurve:
00,00,00,00,00,00,00,00
66,a6,02,00,00,00,00,00
cd,4c,05,00,00,00,00,00
a0,99,0a,00,00,00,00,00
38,33,15,00,00,00,00,00
If done correctly, you will notice you are holding a markedly more responsive mouse.

HIDDEN WINDOWS XP ICONS.
Windows XP Pro and Home contains icons for folders and files that cannot normally be seen, you can select to view hidden files from the folder options menu, but there are still some that remain hidden.
You can set windows to view these files as normal hidden files, so that when you use the view hidden files and folders toggle from the folder options menu that these will be turned on/off along with the normal hidden files.
These files are usually system files and should not be altered/deleted unless you really know what you are doing, if you don't yet still wish to change them I might suggest that you create back-ups of your system first.
I will personally accept no responsibility for any damage caused by using this tweak. To view the hidden files you need to open up regedit, if you are not sure how to do this, select run from the start menu and type in 'regedit' without the apostrophe's. In the regedit window, expand out the groups by clicking on the '+' next to the name in the left hand column of regedit, and navigate to the below address.
HKEY_CURRENT_USER \SOFTWARE \MICROSOFT \WINDOWS \CURRENTVERSION \EXPLORER \ADVANCED
when you have clicked the advanced folder on the left pane, look down the list at the titles in the right hand pane, one of those titles is 'ShowSuperHidden'
double click the title and in the window that appears set the value to equal 1 to show the super hidden files and 0 to hide them.

XP HOME ADVANCED FILE PERMISSIONS.
This is actually an addition to my previous post entitled "Get XP Pro file security with XP Home". In the aforementioned post I outlined how to access
*Advance file Permissions* on NTFS file systems for XP Home simply by booting into *Safe Mode*, rt-clicking any file or folder, and navigating to the *Security tab*. This gives the user the ability to allow or deny read, write, execute, read & write, display contents, full-control, iheritance, and take ownership permissions, with many more options available to apply to different users and groups stored on the computer. Well, you don't have to do this in *Safe Mode* (XP Home). Although it is a little less intuitive, you can simply go to your command prompt - Start>All Programs>Accessories>Command Prompt. Now type "cacls" in the window (without the quotes). This gives you the ability to add, remove or modify file permissions on files and folders through the command prompt. Type "cacls /?" for help on different options and variables. You do not need to be in safe mode to use this so it makes it a little quicker than using the safe mode security tab GUI. Remember - this only applies to NTFS. Here also is a very useful link to find a lot of extras and tweaks straight from the horse's mouth - the Microsoft Resource Center. You will find a lot of very useful web-based extra's here, most of them left unknowing to the general public - such as, "Online Crash Analysis" - a site that looks like Windows Update but you can upload your crash "dump logs" (when you get those system or application crash error reports). Microsoft will then analyze the log file and tell you some more info about WHY the system crashed (ie. faulty hardware/software/conflicts, etc).

FLASHGET :BYPASSING 8 MAX SIMULTANEOUS JOBS.
Users of Flash get will notice that the maximum number of file splits is 8. This number can be increased by the tweak below:
1. Run regedit.
2. Navigate to [HKEY_CURRENT_USER\Software\JetCar\JetCar\General\]
3. Right Click -> Add String Value.
4. Name as MaxSimJobs -> Set the value as what ever number you want.
After a restart you should be able to download with more file splits.

OUTLOOK EXPRESS WINDOWS TITLE TWEAKS.
Change the window title of Outlook Express to anything you want!
In regedt32 and navigate to HKEY_CURRENT_USER\Identities\{EE383506-901D-43C6-8E40-9A61901DF7CC}\Software\Microsoft\Outlook Express\5.0. Add a new string key called WindowTitle and make its value the desired window title. Then close the registry editor, and restart Outlook Express (if it's running.) Your new title now shows up in the title bar!

WINDOWS MEDIA PLAYER 9.
When installing WMP 9 it leaves a watersign on your desktop. You can easily remove this with: regedit:
HKey_Local_Machine\SOFTWARE\microsoft\system certificates\CA\certificates\FEE449EE0E3965A5246F00E87FDE2A065FD89D4
HKey_Local_Machine\software\microsoft\system certificates\ROOT\certificates\2BD63D28D7BCD0E251195AEB519243C13142EBC3
Remove both lines and restart computer.

CHANGING THE WINDOWS MEDIA PLAYER TITLEBAR.
This is a per-user tweak. Open RegEdit.
Browse to the following key:
HKEY_USERS\S-1-5-21-xxxxxxxxx-xxxxxxxxx-xxxxxxxxxx-xxxx\Software\Policies\Microsoft\WindowsMediaPlayer
(the x's will vary from computer to computer , it's the key without the "_Classes" at the end) Create the following String, "TitleBar" , the value of this will now become the TitleBar of Windows Media Player.

AUTO DELETE TEMPORARY FOLDER.
First go into gpedit.msc
Next select -> Computer Configuration/Administrative Templates/Windows Components/Terminal Services/Temporary Folder
Then right click "Do Not Delete Temp Folder Upon Exit"
Go to properties and hit disable. Now next time Windows puts a temp file in that folder it will automatically delete it when its done! Note from Forum Admin: Remember, GPEDIT (Group Policy Editor) is only available in XP Pro.

CLEANUP STARTUP ITEMS IN MSCONFIG.
Do you ever uninstall programs and they are still listed under startup items in msconfig? Personally, I found myself with 30 such items from old installs. Microsoft leaves you no way to clean up this list, but have no fear, I have figured it out for you.
1. Open MSconfig and click on the startup items tab
2. Open Regedit and naviate to HKLM/Software/Microsoft/Sharedtools/MSconfig/startupreg
3. Compare the list of registry keys under startup reg with their counterparts in msconfig.
4. Delete the keys which are no longer valid.
5. Voila! You've cleaned up msconfig.

REMOVING SERVICES DEPENDENCIES.
This will allow you to disable a service or uninstall it from your system without effecting another service that depends on it. Here's how you do it
1. After you have set your services the way you want them and you have disabled/uninstalled something that another services depends on, run "regedit"
2. Under HKEY_LOCAL_MACHINE\System\find the service that will not function, do to another service being disabled/uninstall (found in ControlSet001\Services, ControlSet002\Services, and CurrentControlSet\Services)
3. Once you have found the service right-click on the string value, "DependOnService,"and modify
4. You should now see a list of services that it is dependent on. Simply delete the service that you have disabled/uninstalled
5. Restart your computer and your ready to go Disclaimer REMEMBER TO BACKUP YOU REGISTRY FIRST I'm not totaly sure if this will have any negative effects on your system. I used this method after uninstalling "Netbios over Tcpip" from my system completely, so that my Dhcp service would function and I have had NO negative effects on my system.

ANOTHER WAY TO DELETE HIDDEN DEVICES.
You can view and delete or modify hidden devices by:
1. Openning Device Manager. (I usually right-click on My Computer, select Properties, select the Hardware tab, then select Device Manager.)
2. Select View and check "Show hidden devices"
3. Hidden devices will appear below with the others and can be modified.

HOW TO GET "My Briefcase" IN WINDOWS XP.
go to C:\WINDOWS\system32\dllcache. look for a file named "syncapp".
double click it. an icon should appear on your desktop that says "My Briefcase". double click it. it will come up with this window that tells you how to use it.

TURN NUMLOCK ON AT LOGON.
NumLock does not toggle on by default (system-wide), even if you have it set in your PC's BIOS, because of XP's multi-user functionality. Guess Microsoft doesn't know everyone actually turns it on, which should be reason enough for what acts as "default"...
Anyway, you can hack the Windows Registry to change this behavior, or run a script at logon to turn NumLock on.
1. To enable NumLock through the Registry:
* Open Windows' Registry Editor (START > RUN, type "REGEDIT").
*. Navigate to HKEY_USERS\.Default\Control Panel\Keyboard.
*. Change the value for InitialKeyboardIndicators from 0 to 2.
2. To enable NumLock using a script, see this MS Knowledgebase article for complete instructions:
CODE
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q262625

Option 1 is the quicker method, but if you have more than one user on your system and one or more don't want NumLock on (stranger things have been known of), then option 2 is the way to go since it allows you to only attach the script to specific users.

FREE DISK SPACE BY DELETING RESTORE POINTS.
Start button-all programs-accessories-system tools-cleanup-more options. You will have the option of deleting your restore points.When your done creat one
restore point as a back up.

HOW TO REAL GET RID OF UNNECESSARY SOFTWARE
to uninstall things like msn messenger and other hidden installs thru add remove programs, do this: find sysoc.inf (you might have to enable "show hidden files" and "show hidden/protected system folders" in explorer) and open it in notepad replace all ",hide" with "," (both with out quotes) which is easiest to do with the replace all command under edit then in add/remove programs under add/remove windows compnents and whole new list of things to uninstall and add are now listed (such as internet explorer)

HAVING PROGRAMS RUN WHEN WINDOWS LOADS SLOWS DOWN YOUR STARTUP.
There are two ways do disable programs that may be in your startup (like icq, messanger,) The easiest is to do the following:
1. start --> run --> msconfig
2. Click on the "startup" tab (furthest right)\
3. Unclick any items you don't want to load when windows starts.
The second is by deleting registry entrys, this can be done the following way:
1. Start --> run --> regedit
2. Navigate to : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
3. Delete any entry's that you don't want to load up

TURN OFF INDEXING TO SPEED UP XP.
Windows XP keeps a record of all files on the hard disk so when you do a search on the hard drive it is faster. There is a downside to this and because the computer has to index all files, it will slow down normal file commands like open, close, etc. If you do not do a whole lot of searches on your hard drive then I suggest turnning this feature off:
1. Control Panel
2. Administrative Tools
3. Services
4. Disable Indexing Services

HALF LIFE AND WINDOWS XP.
1. How to recover from incompatible drivers
Before you install new drivers set a system restore point. Start>All programs>Accessories>system tools>system restore
After your new drivers don't work reset your computer. Press F8 repeatedly as soon as the BIOS screen disappears, and before the Windows XP screen appears. Select safe mode. Use system restore again to undo your mess.
2. Video Drivers
The NVidia drivers that come with XP do not allow you to run Half Life in OpenGL. Update to the newest drivers.
Despite the fact that they are not official drivers, 22.50 was the only set which worked
3. Sound Drivers
Use windows update to update Creative drivers.
4. Fixing screen flicker
Windows XP defaults to 60Hz for games. A fix is available here:
CODE
http://www.fileplanet.com/dl/dl.asp?/planetquake/ztn/nvreffix-setup.exe

Select "set: ev ery resolution to monitor's maximum supported rate"
5. Fixing lag
If you are having trouble with lag, try disabling the windows XP firewall. Go to control panel>network connections. Select connection, right click, properties, advanced, untick the firewall.
6. Mouse
You can improve your mouse smoothness for games.
Control panel>mouse>hardware>properties>advanced
Change the sample rate to a higher one, eg. 200

REGISTRY METHOD FOR REMOVING STARTUP ITEMS.
I prefer to use MSCONFIG selective startup to troubleshoot. To remove entries for good, open the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\RUN and HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\RUN
Delete entries of unwanted startup daemons and tray procedures.

DISPLAY MESSAGE ON STARTUP.
Start regedit, if you are unfamiliar with regedit please see our FAQ.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Modify the key legalnoticecaption with what you want to name the window.
Modify the key legalnoticetext with what you want the window to say. Restart.

REMOVE THE DEFAULT IMAGE VIEWER IN WINDOWS ME/XP.
This tweak works in Windows Me/XP, I have not try it in Windows NT/2000 yet, because i don't have that OS, you can try it if you have.
*This tweak does not work in Windows 95/98
To remove the Windows default Image Viewer, first:
Click Start Menu
Select Run menu
Type "cmd", (for Windows Me, type "command")
Then type "regsvr32 /u shimgvw.dll" to unregister this dll. This will stop it from previewing any picture that it support, e.g. JPEG, Bitmap, GIF....
* Before perform this tweak, make sure that you have the alternative Image Viewer installed in you windows e.g. ACDsee, FireGraphics... because once you do this tweak without that application, you can't open and view your image anymore! So, to undo it, type "regsvr32 shimgvw.dll" in command prompt.

SPEED UP BOOT BY DISABLING UNUSED PORTS.
You may have tried many tweaks like modifying windowsXP start-up applications, prefetches, unload DLLs method,etc. And yes those methods do work for me.
I have just accidentally found out another way to give you an extra boost in windowsXP's boot performance. This is done by disabling your unused devices in
Device Manager. for example, if you don't have input devices that are connected to one of your USBs or COM ports, disabling them will give you an extra perfromance boost in booting. Go to Control Panel -> System -> Hardware tab -> device manager Disable devices that you don't use for your PC and then restart.

CLEAR UNWANTED ENTRIES FROM ADD/REMOVE PROGRAMS.
Run the Registry Editor (REGEDIT).
Open HKEY_LOCAL_MACHINE\ SOFTWARE\ Microsoft\ Windows\ CurrentVersion\ Uninstall Remove any unwanted keys under "Uninstall."

CLICKING * .AVI FILES ON EXPLORER CAUSING 100% CPU USAGE.
Well windows seem to have a REALLY big problem when it comes to reading AVI files. It seems that when you click on an AVI file in explorer, it'll try to read the entire AVI file to determine the width,height, etc. of the AVI file (this is displayed in the Properties window). Now the problem with Windows is that if you have a broken/not fully downloaded AVI file that doesnt contain this info, Windows will scan the entire AVI file trying to figure out all these properties which in the process will probably cause 100% CPU usage and heavy memory usage. To solve this problem all you have to do is the following:
1. Open up regedit
2. Goto HKEY_CLASSES_ROOT\SystemFileAssociations\.avi\shellex\PropertyHandler
3. Delete the "Default" value which should be "{87D62D94-71B3-4b9a-9489-5FE6850DC73E}"
Voila! Please not that this will no longer provide you with the windows properties displaying the AVI file information such as width, height, bitrate etc. But its a small price to pay for saving you resources.
NOTE: Please use caution when using regedit. Improper usage may cause windows to behave imcorrectly. Also, I cannot be held resposible. Backup your registry first.

CD ROM STOPS AUTOPLAYING/AUTORUN.
And the AutoPlay Tab has disappeared in My Computer, Devices With Removable Storage, Right Click on CDROM, Properties.
Solution: The service: "Shell Hardware Detection" has been set to Manual or Disabled. Go to Control Panel, Administrative Tools, Services. Return this service to "Automatic".

SHUTDOWN XP FASTER 1.
Like previous versions of windows, it takes long time to restart or shutdown windows xp when the "Exit Windows" sound is enabled. to solve this problem you
must disable this useless sound. click start button then go to settings -> control panel -> Sound,Speech and Audio devices -> Sounds and Audio Devices -> Sounds, then under program events and windows menu click on "Exit Windows" sub-menu and highlight it.now from sounds you can select,choose "none" and then click apply and ok. now you can see some improvements when shutting down your system.

SHUTDOWN XP FASTER 2.
Start Regedit.
Navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control.
Click on the "Control" Folder.
Select "WaitToKillServiceTimeout"
Right click on it and select Modify.
Set it a value lower than 2000 (Mine is set to 200).

EASIEST WAY TO DELETE PREFETCH.
1. Open notepad.exe, type del c:\windows\prefetch\*.* /q (without the quotes) & save as "delprefetch.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Startup" in the right window.
4. In the new window, click "add", "Browse", locate your "delprefetch.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. Reboot your computer.

SPEED UP MENU DISPLAY.
When using the start menu the you will notice a delay between different tiers of the menu hierarchy. For the fastest computer experience possible I recommend changing this value to zero. This will allow the different tiers to appear instantly. Start Regedit. If you are unfamiliar with regedit please refer to our FAQ on how to get started.
Navigate to HKEY_CURRENT_USER\Control Panel\Desktop
Select MenuShowDelay from the list on the right.
Right on it and select Modify.
Change the value to 0.
Reboot your computer.

16 COLOUR ICONS.
If you select 16bit mode for graphics your icons will revert to using 8bit (16 color) icons. Yuck! Change the following registry setting to:
[HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "Shell Icon BPP"="16" "Shell Icon Size"="32" Setting the BPP to 16bit will yield 65565 colors for icons.

DE-CRYPT ENCRYPTED FILES ON WINDOWS XP.
1. Login as Administrator
2. Go to Start/Run and type in cmd and click OK.
At the prompt type cipher /r:Eagent and press enter
This prompt will then display:
Please type in the password to protect your .PFX file:
Type in your Administrator password
Re-confirm your Administrator password
The prompt will then display
Your .CER file was created successfully.
Your .PFX file was created successfully.
The Eagent.cer and Eagent.pfx files will be saved in the current directory that is shown at the command prompt. Example: The command prompt displays
C:\Documents and Settings\admin> the two files are saved in the admin folder. (For security concerns, you should house the two files in your Administrator folder or on a floppy disk).
3. Go to Start/Run and type in certmgr.msc and click OK. This will launch the Certificates Manager. Navigate to Personal and right click on the folder and select All Tasks/Import. The Certificate Import Wizard will appear. Click Next. Browse to the C:\Documents and Settings\admin folder. In the Open dialog box, change the Files of Type (at the bottom) to personal Information Exchange (*.pfx,*.P12). Select the file Eagent.pfx and click Open. Click Next. Type in your Administrator password (leave the two checkboxes blank) and click Next. Make sure the Radio button is active for the first option (Automatically select the certificate store based on the type of certifcate). Click Next. Click Finish. (You'll receive a message that the import was successful). To confirm the import, close Certificates Manager and re-open it. Expand the Personal folder and you will see a new subfolder labeled Certificates. Expand that folder and you will see the new entry in the right side column. Close Certificate Manager.
4. Go to Start/Run and type in secpol.msc and click OK. This will launch the Local Security Policy. Expand the Public Key Policies folder and then right click on the Encrypted File System subfolder and select Add Data Recovery Agent... The Wizard will then display. Click Next. Click the Browse Folders... button. Browse to the C:\Documents and Settings\admin folder. Select the Eagent.cer file and click Open. (The wizard will display the status User_Unknown. That's ok). Click Next. Click Finish. You will see a new entry in the right side column. Close the Local Security Policy.
You, the Administrator are now configured as the default Recovery Agent for All Encrypted files on the Local Machine.
To Recover Encrypted files: Scenario #1
If you have completed the above steps BEFORE an existing user encrypted his/her files, you can log in to your Administrator account and navigate to the encrypted file(s). Double click on the file(s) to view the contents.
Scenario #2
If you have completed the above steps AFTER an existing user has already encrypted his/her files, you must login to the applicable User's User Account and then immediately logout. Next, login to your Administrator account and navigate to the encrypted file(s). Double click on the file(s) to view the contents.
*Warning Do not Delete or Rename a User's account from which will want to Recover the Encrypted Files. You will not be able to de-crypt the files using the steps outlined above.

DUMP FILES TWEAK & DISABLE DR.WATSON.
"Dump file. A dump file stores data from memory during a system crash and can be helpful when diagnosing problems, but like a swap file, it can also expose a lot of sensitive, unencrypted data. To prevent Windows from creating the file, go to Control Panel | System. Click on the Advanced tab and then the Settings button on the Startup and Recovery pane. Set the drop-down menu under Write debugging information to (none). "Similarly, the debugging program Dr. Watson saves information when applications crash. To disable it, go to:
HKEY_local_machine\software\Microsoft\WindowsNT\CurrentVersion\ AeDebug and set the Auto string to 0. Then use Windows Explorer to go to Documents and Settings\All Users\Shared Documents\DrWatson. Delete User.dmp and Drwtsn32.log, the insecure logs the program creates." Heed related advice from 'microsoft' regarding 'Disable Dr.Watson' first before the preceding Dr. Watson advice (go Google search.) Back up with System Restore, and go ahead. As cautious as I am, I have gladly applied these tweaks, and followed related microsot advice on Dr. Watson.

Precaution: Backups All Of Your Data Before Tweaking, Not All Of The Tips I've Mentioned Above Were Tested. I Don't Responsible For Any Damages. Happy Experiments

How to search for RAPIDSHARE links

2012-06-04T05:45:00.000-07:00

how to search google for RAPIDSHARE links

If you wanna find some apps, files etc on rapidshare.de via google, do the following.

Paste this into the google search window (not the adress bar):

site:rapidshare.de -filetype:zip OR rar daterange:2453402-2453412

* this searches the site rapidshare.de for any file that is rar or zip, and
has been indexed between 1-11 February.

dvd site:rapidshare.de -filetype:zip OR rar daterange:2453402-2453412

* this is the same search but it specifically searches for "dvd" with the same
search criteria, so any app posted with the word dvd in it will be found.

There are mainly three criteria to keep in mind when doing this search.

1. site: your site of choice to search

2. filetype: filetypes you wanna search,if you put a "OR" after the first
filetype you can add more.

3. daterange: (start date-enddate)

* this uses the "julian calendar", converter can be found here:

Code:
http://aa.usno.navy.mil/data/docs/JulianDate.html

How to set up a http server

2012-06-04T05:42:00.001-07:00

(Either you can set up a basic server which means you stop at step... or if you want to make a server with free address you can continue after that step)

1. We are going to use a program called hfs i like the beta version (2) you will need to download this program.
Go to www.rejetto.com/temp/hfs2.0beta23.zip

2. Make a folder where you wish to run it from for example C:/Program files/hfs or C:/Documents and settins/Username/My documents/Hfs

3. Move the downloaded zip file into that folder and extract it.

4. Delete the zip file and KEEP THE OTHER FILES!!!!!
user posted image
5. Run the program and it will come up with a screen that looks like this
user posted image
6. Click the button that says easy mode (this turns it into expert mode which basicly means you have all the options)

7. Where it says port change the port to 80 (this can clash with some programs like webcam on msn and maybe others im not sure) ((the port you choose doesnt really matter 80 is just easier))

8. How to turn on port forwarding. (ONLY for people with routers) ((this varies depending on which make of router you have but for my router sweex i will tell you how its done))
Go to internet explorer or mozzilla firefox. Type into the address bar 192.168.2.1 with nothing in else. A window will come up asking you for username and password by default this is admin and 1234 it will only be different if you have changed it.

9. This window should then show up.

user posted image

Click general setup then you will see this window

user posted image
Click NAT then port forwarding
You should now see this

user posted image

In private ip you need to post your computers local network address like for example 192.168.1.1 or 192.168.1.2 it depends. If you do not know how to do this here is how its found out
Click start>run>cmd type in the command line ipconfig
wait
some information will come up looking like this
user posted image

That is your computers local network address.

So going back to

user posted image
Now go back to hfs and you must enter your ip (not your local address but your ip) here

user posted image
Keep the http:// in front of your ip.
This is essentially now your server. Make sure it is on and you can go and visit it at http://yourip:port/
To add files simply drag and drop them in. Then click virtual folder.

That was if you do not want a personal address you can make it personal like mine http://randomshitfromtimmy.no-ip.org very easily.
All you have to do is go to www.no-ip.com
Make a username
Log in
Click add on the left hand side
Make a hostname (mine is randomshitfromtimmy)
Click port 80 redirect
Enter your ip in the ip address field
And choose the port you wish to forward (this is either 80 or the other one that you chose)
Click add redirect.

Now you have a fully working hfs system.It runs of you bandwidth so if lots of people are downloading you will find your net goes slowly so remeber to set limits.

(below is a pic of a set up hfs working) Ips blurred for privacy.

Yahoo Chat Commands

2012-06-04T05:40:00.000-07:00

/join [room] go to what ever room you wish

/invite [buddys name] sends invitation request

/tell [user] [message] private messages a friend

/follow [user] follows a friend

/stopfollow [user] stop following someone

/stopfollow [yourname] to stop them from following you

/goto [user] enters the room the user is in

/away [off] turn your private messages back on

/think [message] (type this to think what you want

/ignore [list] list everyone who you are ignoring

/ignore add [user] add someone to your ignoring list

/ignore [add all] ignores everything going on

How To Speed WinXP

2012-06-02T22:58:00.000-07:00

Since defragging the disk won't do much to improve Windows XP performance, here are 23 suggestions that will. Each can enhance the performance and reliability of your customers' PCs. Best of all, most of them will cost you nothing.
1.) To decrease a system's boot time and increase system performance, use the money you save by not buying defragmentation software -- the built-in Windows defragmenter works just fine -- and instead equip the computer with an Ultra-133 or Serial ATA hard drive with 8-MB cache buffer.

2.) If a PC has less than 512 MB of RAM, add more memory. This is a relatively inexpensive and easy upgrade that can dramatically improve system performance.

3.) Ensure that Windows XP is utilizing the NTFS file system. If you're not sure, here's how to check: First, double-click the My Computer icon, right-click on the C: Drive, then select Properties. Next, examine the File System type; if it says FAT32, then back-up any important data. Next, click Start, click Run, type CMD, and then click OK. At the prompt, type CONVERT C: /FS:NTFS and press the Enter key. This process may take a while; it's important that the computer be uninterrupted and virus-free. The file system used by the bootable drive will be either FAT32 or NTFS. I highly recommend NTFS for its superior security, reliability, and efficiency with larger disk drives.

4.) Disable file indexing. The indexing service extracts information from documents and other files on the hard drive and creates a "searchable keyword index." As you can imagine, this process can be quite taxing on any system.

The idea is that the user can search for a word, phrase, or property inside a document, should they have hundreds or thousands of documents and not know the file name of the document they want. Windows XP's built-in search functionality can still perform these kinds of searches without the Indexing service. It just takes longer. The OS has to open each file at the time of the request to help find what the user is looking for.

Most people never need this feature of search. Those who do are typically in a large corporate environment where thousands of documents are located on at least one server. But if you're a typical system builder, most of your clients are small and medium businesses. And if your clients have no need for this search feature, I recommend disabling it.

Here's how: First, double-click the My Computer icon. Next, right-click on the C: Drive, then select Properties. Uncheck "Allow Indexing Service to index this disk for fast file searching." Next, apply changes to "C: subfolders and files," and click OK. If a warning or error message appears (such as "Access is denied"), click the Ignore All button.

5.) Update the PC's video and motherboard chipset drivers. Also, update and configure the BIOS. For more information on how to configure your BIOS properly, see this article on my site.

6.) Empty the Windows Prefetch folder every three months or so. Windows XP can "prefetch" portions of data and applications that are used frequently. This makes processes appear to load faster when called upon by the user. That's fine. But over time, the prefetch folder may become overloaded with references to files and applications no longer in use. When that happens, Windows XP is wasting time, and slowing system performance, by pre-loading them. Nothing critical is in this folder, and the entire contents are safe to delete.

7.) Once a month, run a disk cleanup. Here's how: Double-click the My Computer icon. Then right-click on the C: drive and select Properties. Click the Disk Cleanup button -- it's just to the right of the Capacity pie graph -- and delete all temporary files.

8.) In your Device Manager, double-click on the IDE ATA/ATAPI Controllers device, and ensure that DMA is enabled for each drive you have connected to the Primary and Secondary controller. Do this by double-clicking on Primary IDE Channel. Then click the Advanced Settings tab. Ensure the Transfer Mode is set to "DMA if available" for both Device 0 and Device 1. Then repeat this process with the Secondary IDE Channel.

9.) Upgrade the cabling. As hard-drive technology improves, the cabling requirements to achieve these performance boosts have become more stringent. Be sure to use 80-wire Ultra-133 cables on all of your IDE devices with the connectors properly assigned to the matching Master/Slave/Motherboard sockets. A single device must be at the end of the cable; connecting a single drive to the middle connector on a ribbon cable will cause signaling problems. With Ultra DMA hard drives, these signaling problems will prevent the drive from performing at its maximum potential. Also, because these cables inherently support "cable select," the location of each drive on the cable is important. For these reasons, the cable is designed so drive positioning is explicitly clear.

10.) Remove all spyware from the computer. Use free programs such as AdAware by Lavasoft or SpyBot Search & Destroy. Once these programs are installed, be sure to check for and download any updates before starting your search. Anything either program finds can be safely removed. Any free software that requires spyware to run will no longer function once the spyware portion has been removed; if your customer really wants the program even though it contains spyware, simply reinstall it. For more information on removing Spyware visit this Web Pro News page.

11.) Remove any unnecessary programs and/or items from Windows Startup routine using the MSCONFIG utility. Here's how: First, click Start, click Run, type MSCONFIG, and click OK. Click the StartUp tab, then uncheck any items you don't want to start when Windows starts. Unsure what some items are? Visit the WinTasks Process Library. It contains known system processes, applications, as well as spyware references and explanations. Or quickly identify them by searching for the filenames using Google or another Web search engine.

12.) Remove any unnecessary or unused programs from the Add/Remove Programs section of the Control Panel.

13.) Turn off any and all unnecessary animations, and disable active desktop. In fact, for optimal performance, turn off all animations. Windows XP offers many different settings in this area. Here's how to do it: First click on the System icon in the Control Panel. Next, click on the Advanced tab. Select the Settings button located under Performance. Feel free to play around with the options offered here, as nothing you can change will alter the reliability of the computer -- only its responsiveness.

14.) If your customer is an advanced user who is comfortable editing their registry, try some of the performance registry tweaks offered at Tweak XP.

15.) Visit Microsoft's Windows update site regularly, and download all updates labeled Critical. Download any optional updates at your discretion.

16.) Update the customer's anti-virus software on a weekly, even daily, basis. Make sure they have only one anti-virus software package installed. Mixing anti-virus software is a sure way to spell disaster for performance and reliability.

17.) Make sure the customer has fewer than 500 type fonts installed on their computer. The more fonts they have, the slower the system will become. While Windows XP handles fonts much more efficiently than did the previous versions of Windows, too many fonts -- that is, anything over 500 -- will noticeably tax the system.

18.) Do not partition the hard drive. Windows XP's NTFS file system runs more efficiently on one large partition. The data is no safer on a separate partition, and a reformat is never necessary to reinstall an operating system. The same excuses people offer for using partitions apply to using a folder instead. For example, instead of putting all your data on the D: drive, put it in a folder called "D drive." You'll achieve the same organizational benefits that a separate partition offers, but without the degradation in system performance. Also, your free space won't be limited by the size of the partition; instead, it will be limited by the size of the entire hard drive. This means you won't need to resize any partitions, ever. That task can be time-consuming and also can result in lost data.

19.) Check the system's RAM to ensure it is operating properly. I recommend using a free program called MemTest86. The download will make a bootable CD or diskette (your choice), which will run 10 extensive tests on the PC's memory automatically after you boot to the disk you created. Allow all tests to run until at least three passes of the 10 tests are completed. If the program encounters any errors, turn off and unplug the computer, remove a stick of memory (assuming you have more than one), and run the test again. Remember, bad memory cannot be repaired, but only replaced.

20.) If the PC has a CD or DVD recorder, check the drive manufacturer's Web site for updated firmware. In some cases you'll be able to upgrade the recorder to a faster speed. Best of all, it's free.

21.) Disable unnecessary services. Windows XP loads a lot of services that your customer most likely does not need. To determine which services you can disable for your client, visit the Black Viper site for Windows XP configurations.

22.) If you're sick of a single Windows Explorer window crashing and then taking the rest of your OS down with it, then follow this tip: open My Computer, click on Tools, then Folder Options. Now click on the View tab. Scroll down to "Launch folder windows in a separate process," and enable this option. You'll have to reboot your machine for this option to take effect.

23.) At least once a year, open the computer's cases and blow out all the dust and debris. While you're in there, check that all the fans are turning properly. Also inspect the motherboard capacitors for bulging or leaks. For more information on this leaking-capacitor phenomena, you can read numerous articles on my site.

Following any of these suggestions should result in noticeable improvements to the performance and reliability of your customers' computers. If you still want to defrag a disk, remember that the main benefit will be to make your data more retrievable in the event of a crashed drive.

Hacking Password For Website's

2012-06-02T22:54:00.000-07:00

Hacking Password Protected Website's

There are many ways to defeat java-script protected websites. Some are very simplistic, such as hitting

[ctl-alt-del ]when the password box is displayed, to simply turning offjava capability, which will dump you into the default page.You can try manually searching for other directories, by typing the directory name into the url address box of your browser, ie: you want access to www.target.com .

Try typing www.target.com/images .(almost ever y web site has an images directory) This will put you into the images directory,and give you a text list of all the images located there. Often, the title of an image will give you a clue to the name of another directory. ie: in www.target.com/images, there is a .gif named gamestitle.gif . There is a good chance then, that there is a 'games' directory on the site,so you would then type in www.target.com/games, and if it isa valid directory, you again get a text listing of all the files available there.

For a more automated approach, use a program like WEB SNAKE from anawave, or Web Wacker. These programs will create a mirror image of an entire web site, showing all director ies,or even mirror a complete server. They are indispensable for locating hidden files and directories.What do you do if you can't get past an opening "PasswordRequired" box? . First do an WHOIS Lookup for the site. In our example, www.target.com . We find it's hosted by www.host.com at 100.100.100. 1.

We then go to 100.100.100.1, and then launch \Web Snake, and mirror the entire server. Set Web Snake to NOT download anything over about 20K. (not many HTML pages are bigger than this) This speeds things up some, and keeps you from getting a lot of files and images you don't care about. This can take a long time, so consider running it right before bed time. Once you have an image of the entire server, you look through the directories listed, and find /target. When we open that directory, we find its contents, and all of its sub-directories listed. Let's say we find /target/games/zip/zipindex.html . This would be the index page that would be displayed had you gone through the password procedure, and allowed it to redirect you here.By simply typing in the url www.target.com/games/zip/zipindex.html you will be onthe index page and ready to follow the links for downloading.

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

(DISCLAIMER)XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

The Info Above Is Lame!!!. I Dont Condone The Use Of This Document In A Malisous Manner. I Suggest That U Dont Do it But U Do What Ever U Want. I Will Not Be Responsible For Any Thing That Might Happen To U If U Use This. :)

What Is NetBIOS

2012-06-02T22:53:00.000-07:00

The Magic of NetBIOS

In this guide you will learn how to explore the Internet using Windows XP and NetBIOS:

· How to Install NetBIOS

· How to Use Nbtstat

· The Net View Command

· What to Do Once You Are Connected

· How to Break in Using the XP GUI

· More on the Net Commands

· How Crackers Break in as Administrator

· How to Scan for Computers that Use NetBIOS

· How to Play NetBIOS Wargames

· An Evil Genius Tip for Win NT Server Users

· Help for Windows 95, 98, SE and ME Users

Not many computers are reachable over the Internet using NetBIOS commands - maybe only a few million. But what the heck, a few million is enough to keep a hacker from getting bored. And if you know what to look for, you will discover that there are a lot of very busy hackers and Internet worms searching for computers they can break into by using NetBIOS commands. By learning the dangers of NetBIOS, you can get an appreciation for why it is a really, truly BAD!!! idea to use it.

*****************
Newbie note: a worm is a program that reproduces itself. For example, Code Red automatically searched over the Internet for vulnerable Windows computers and broke into them. So if you see an attempt to break into your computer, it may be either a human or a worm.
*****************

If you run an intrusion detection system (IDS) on your computer, you are certain to get a lot of alerts of NetBIOS attacks. Here's an example:

The firewall has blocked Internet access to your computer (NetBIOS Session) from 10.0.0.2 (TCP Port 1032) [TCP Flags: S].

Occurred: 2 times between 10/29/2002 7:38:20 AM and 10/29/2002 7:46:18 AM

A Windows NT server on my home network, which has addresses that all start with 10.0.0, caused these alerts. In this case the server was just doing its innocent thing, looking for other Windows computers on my LAN (local area network) that might need to network with it. Every now and then, however, an attacker might pretend to have an address from your internal network even though it is attacking from outside.

If a computer from out on the Internet tries to open a NetBIOS session with one of mine, I'll be mighty suspicious. Here's one example of what an outside attack may look like:

The firewall has blocked Internet access to your computer (NetBIOS Name) from 999.209.116.123 (UDP Port 1028).

Time: 10/30/2002 11:10:02 AM
(The attacker's IP address has been altered to protect the innocent or the guilty, as the case may be.)

Want to see how intensely crackers and worms are scanning the Internet for potential NetBIOS targets? A really great and free IDS for Windows that is also a firewall is Zone Alarm. You can download it for free from http://www.zonelabs.com . You can set it to pop up a warning on your screen whenever someone or some worm attacks your computer. You will almost certainly get a NetBIOS attack the first day you use your IDS.

Do you need to worry when a NetBIOS attack hits? Only if you have enabled NetBIOS and Shares on your computer. Unfortunately, in order to explore other computers using NetBIOS, you increase the danger to your own computer from attack by NetBIOS. But, hey, to paraphrase a famous carpenter from Galilee, he who lives by the NetBIOS gets hacked by the NetBIOS.

********************
Newbie note: NetBEUI (NetBIOS Extended User Interface) is an out-of-date, crummy, not terribly secure way for Windows computers to communicate with each other in a peer-to-peer mode. NetBIOS stands for network basic input/output system.

Newbie note: Shares are when you make it so other computers can access files and directories on your computer. If you set up your computer to use NetBIOS, in Win XP using the NTFS (new technology file system) you can share files and directories by bringing up My Computer. Click on a directory - which in XP is called a "folder". In the left-hand column a task will appear called "Share this folder". By clicking this you can set who can access this folder, how many people at a time can access it, and what they can do with the folder.
********************

There are a number of network exploration commands that only NetBIOS uses. We will show how to use nbtstat and several versions of the net command.

How to Install NetBIOS

You might have to make changes on your system in order to use these commands. Here's how to enable NetBIOS for Windows XP. (If you are stuck with Windows 95, 98, SE or ME, see the end of this Guide for how to enable NetBIOS.) Click:

Control Panel -> Network Connections

There are two types of network connections that may appear here: "Dial-up" and "LAN or High-Speed Internet".

**************
Newbie note: A dial-up connection uses a modem to reach the Internet. LAN stands for local area network. It's what you have if two or more computers are linked to each other with a cable instead of modems. Most schools and businesses have LANs, as well as homes with Internet connection sharing. A DSL or cable modem connection will also typically show up as a LAN connection.
**************

To configure your connections for hacking, double click on the connection you plan to use. That brings up a box that has a button labeled "Properties". Clicking it brings up a box that says "This connection uses the following items:"

You need to have both TCP/IP and NWLink NetBIOS showing. If NWLink NetBIOS is missing, here's how to add it. Click Install -> Protocol -> Add NWlink/IPX/SPX/NetBIOS Compatible Transport Protocol.

**************
Newbie note: NWLink refers to Novell's Netware protocol for running a LAN.
**************

How to Use Nbtstat

To get started, bring up the cmd.exe command. Click Start -> Run and type cmd.exe in the command line box. This brings up a black screen with white letters. Once it is up, we will play with the nbtstat command. To get help for this command, just type:

C:\>nbtstat help

One way to use the nbtstat command is to try to get information from another computer using either its domain name (for example test.target.com), its numerical Internet address (for example, happyhacker.org's numerical address is 206.61.52.30), or its NetBIOS name (if you are on the same LAN).

C:\>nbtstat -a 10.0.0.2

Local Area Connection:
Node IpAddress: [10.0.0.1] Scope Id: []

NetBIOS Remote Machine Name Table

Name Type Status
---------------------------------------------
OLDGUY <00> UNIQUE Registered
OLDGUY <20> UNIQUE Registered
WARGAME <00> GROUP Registered
INet~Services <1C> GROUP Registered
IS~OLDGUY......<00> UNIQUE Registered
OLDGUY <03> UNIQUE Registered
WARGAME <1E> GROUP Registered
ADMINISTRATOR <03> UNIQUE Registered

MAC Address = 52-54-00-E4-6F-40

What do these things tell us about this computer? Following is a table explaining the codes you may see with an nbtstat command (taken from the MH Desk Reference, written by the Rhino9 team).

Name Number Type Usage =========================================================
00 U Workstation Service
01 U Messenger Service
<\\_MSBROWSE_> 01 G Master Browser
03 U Messenger Service
06 U RAS Server Service
1F U NetDDE Service
20 U File Server Service
21 U RAS Client Service
22 U Exchange Interchange
23 U Exchange Store
24 U Exchange Directory
30 U Modem Sharing Server Service
31 U Modem Sharing Client Service
43 U SMS Client Remote Control
44 U SMS Admin Remote Control Tool
45 U SMS Client Remote Chat
46 U SMS Client Remote Transfer
4C U DEC Pathworks TCPIP Service
52 U DEC Pathworks TCPIP Service
87 U Exchange MTA
6A U Exchange IMC
BE U Network Monitor Agent
BF U Network Monitor Apps
03 U Messenger Service
00 G Domain Name
1B U Domain Master Browser
1C G Domain Controllers
1D U Master Browser
1E G Browser Service Elections
1C G Internet Information Server
00 U Internet Information Server

To keep this Guide from being ridiculously long, we'll just explain a few of the things what we learned when we ran nbtstat -a against 10.0.0.2:

* it uses NetBIOS
* its NetBIOS name is Oldguy
* one of the users is named Administrator
* it runs a web site with Internet Information Server, and maybe an ftp - file transfer protocol -- server
* it is a member of the domain Wargame
* it is connected on a local area network and we accessed it through an Ethernet network interface card (NIC) with a MAC Address of 52-54-00-E4-6F-40.

When using nbtstat over the Internet, in most cases it will not find the correct MAC address. However, sometimes you get lucky. That is part of the thrill of legal hacker exploration. OK, OK, maybe getting a thrill out of a MAC address means I'm some kind of a freak. But if you are reading this, you probably are freaky enough to be a hacker, too.

**************
Newbie note: MAC stands for media access control. In theory every NIC ever made has a unique MAC address, one that no other NIC has. In practice, however, some manufacturers make NICs that allow you to change the MAC address.
**************

**************
Evil Genius tip: sneak your computer onto a LAN and use it to find the MAC address of a very interesting computer. Crash it, then give yours the same MAC, NetBIOS name and Internet address as the very interesting computer. Then see what you can do while faking being that computer. That's why I get a charge out of discovering a MAC address, so stop laughing at me already.
**************

**************
You can get fired, expelled, busted and catch cooties warning: Faking all that stuff is something you would be better off doing only on your own test network, or with written permission from the owner of the very interesting computer.
**************

Now that we know some basic things about computer 10.0.0.2, also known as Oldguy, we can do some simple things to learn more. We can connect to it with a web browser to see what's on the web site, and with ftp to see if it allows anonymous users to download or upload files. In the case of Oldguy, anyone can browse the web site. However, when we try to connect to its ftp server with Netscape by giving the location ftp://10.0.0.2, it returns the message "User Mozilla@ cannot log in.

**************
Newbie note: The people who programmed Netscape have always called it Mozilla, after a famous old movie monster. As a joke they have stuck obscure mentions of Mozilla into the operations of Netscape. Mozilla lovers recently spun off a pure Mozilla browser project that has the web site http://www.mozilla.org.
**************

The Net View Command

Now let's have some serious fun. Netscape (or any browser or ftp program) uses TCP/IP to connect. What happens if we use NetBIOS instead to try to download files from Oldguy's ftp server?

Let's try some more NetBIOS commands:

C:\>net view \\10.0.0.2
System error 53 has occurred.

The network path was not found.

I got this message because my firewall blocked access to Oldguy, giving the message:

The firewall has blocked Internet access to 10.0.0.2 (TCP Port 445) from your computer [TCP Flags: S].

There's a good reason for this. My firewall/IDS is trying to keep me from carelessly making my computer a part of some stranger's LAN. Keep in mind that NetBIOS is a two-way street. However, I want to run this command, so I shut down Zone Alarm and give the command again:

C:\>net view \\10.0.0.2
Shared resources at \\10.0.0.2

Share name Type Used as Comment

--------------------------------------------------------
ftproot Disk
InetPub Disk
wwwroot Disk
The command completed successfully.

This is a list of shared directories. Oooh, look at that, the ftp server is shared. Does this mean I can get in? When setting shares on a Windows NT server, the default choice is to allow access to read, write and delete files to everyone. So sometimes a sysadmin carelessly fails to restrict access to a share.

What is really important is that we didn't need a user name or password to get this potentially compromising information.

Let's establish an anonymous connection to Oldguy, meaning we connect without giving it a user name or password:

C:\>net use \\10.0.0.2\ipc$
Local name
Remote name \\10.0.0.2\IPC$
Resource type IPC
Status OK
# Opens 0
# Connections 1
The command completed successfully.

We are connected!

**********************
Newbie note: IPC (ipc$) stands for "Inter Process Connector", used to set up connections across a network between Windows computers using NetBIOS.
**********************

What to Do Once you Are Connected

So far we haven't quite been breaking the law, although we have been getting pretty rude if the owner of that target computer hasn't given us permission to explore. What if we want to stop pushing our luck and decide to disconnect? Just give the message:

C:\>net session \\10.0.0.2 /delete

Of course you would substitute the name or number of the computer to which you are connected for 10.0.0.2.

What if you want to stay connected? Oldguy will let you stay connected even if you do nothing more. By contrast, a login to a Unix/Linux type computer will normally time out and disconnect you if you go too long without doing anything.

How to Break in Using the XP GUI

You could try out the other net commands on Oldguy. Or you can go to the graphical user interface (GUI) of XP. After running the above commands I click My Computer, then My Network Places and there you'll find the victim, er, I mean, target computer. By clicking on it, I discover that ftproot has been shared to - everyone!

Let's say you were to get this far investigating some random computer you found on the Internet. Let's say you had already determined that the ftp server isn't open to the public. At this moment you would have a little angel sitting one shoulder whispering "You can be a hero. Email the owner of that computer to tell him or her about that misconfigured ftproot."

On the other shoulder a little devil is sneering, "Show the luser no mercy. Information should be free. Because I said so, that's why. Hot darn, are those spreadsheets from the accounting department? You could make a lot of bucks selling those files to a competitor, muhahaha! Besides, you're so ugly that future cellmate Spike won't make you be his girlfriend."

Some hackers might think that because ftproot is shared to the world that it is OK to download stuff from it. However, if someone were to log in properly to that ftp server, he or she would get the message "Welcome to Oldguy on Carolyn Meinel's LAN. Use is restricted to only those for whom Meinel has assigned a user name and password." This warning logon banner is all a computer owner needs to legally establish that no one is allowed to just break in. It won't impress a judge if a cracker says "The owner was so lame that her computer deserved to get broken into" or "I'm so lame that I forgot to try to use the ftp server the normal way."

More on the Net Commands

Let's get back to the net commands. There are many forms of this command. In XP you can learn about them with the command:

C:\>net help
The syntax of this command is:

NET HELP
command
-or-
NET command /HELP

Commands available are:

· NET ACCOUNTS

· NET HELP

· NET SHARE
NET COMPUTER

· NET HELPMSG

· NET START

· NET CONFIG

· NET LOCALGROUP

· NET STATISTICS

· NET CONFIG SERVER

· NET NAME

· NET STOP

· NET CONFIG WORKSTATION

· NET PAUSE

· NET TIME

· NET CONTINUE

· NET PRINT

· NET USE

· NET FILE

· NET SEND

· NET USER

· NET GROUP

· NET SESSION

· NET VIEW

· NET HELP SERVICES lists some of the services you can start.

· NET HELP SYNTAX explains how to read NET HELP syntax lines.

· NET HELP command | MORE displays Help one screen at a time.

How Crackers Break in as Administrator

As we look around Oldguy further, we see that there's not much else an anonymous user can do to it. We know that there is a user named Administrator. What can we do if we can convince Oldguy that we are Administrator?

******************
Newbie note: in Windows NT, 2000 and XP, the Administrator user has total power over its computer, just as root has total power over a Unix/Linux type computer. However, it is possible to change the name of Administrator so an attacker has to guess which user has all the power.
******************

Let's try to log in as Administrator by guessing the password. Give the command:

C:\>net use \\10.0.0.2\ipc$ * /user:Administrator
Type the password for \\10.0.0.2\ipc$:
System error 1219 has occurred.

Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again.

This means that someone else is currently logged onto this server who has Administrator rights. Furthermore, this person is probably watching me on an IDS and thinking up terrible things to do to me. Eeep! Actually this is all going on inside my hacker lab - but you get the idea of what it could be like when trying to invade a computer without permission.

I discover that whether I guess the password correctly or not, I always get the same error message. This is a good safety feature. On the other hand, one of the users is named Administrator. This is a bad thing for the defender. When you first set up a Windows NT or 2000 server, there is always a user called Administrator, and he or she has total power over that computer. If you know the all-powerful user is named Administrator, you can try guessing the password whenever no one is logged on with Administrator powers.

Computer criminals don't waste time guessing by hand. They use a program such as NAT or Legion to get passwords. These programs are why smart NT administrators rename their Administrator accounts and choose hard passwords. Also, this kind of persistent attack will be detected by an intrusion detection system, making it easy to catch criminals at work.

********************
You can get expelled warning: What if you are a student and you want to save your school from malicious code kiddies who steal tests and change grades? It is important to get permission *in writing* before you test the school's network. Even then, you still must be careful to be a model student. If you act up, cut classes - you know what I mean - the first time a cracker messes up the network, who do you think they will suspect? Yes, it's unfair, and yes, that is the way the world works.
********************

How to Scan for Computers that Use NetBIOS

Your tool of choice is a port scanner. Any computer that is running something on port 139 is likely (but not certain) to be using NetBIOS. Most crackers use nmap to port scan. This tool runs on Unix/Linux type computers. You can get it at . There is also a Windows version of nmap, but it isn't very good. A better choice for Windows is Whats Up from . You can get a one month free trial of it.

Here's an example of an nmap scan of Oldguy:

test-box:/home/cmeinel # nmap -sTU 10.0.0.2

Starting nmap V. 3.00 ( www.insecure.org/nmap/ )
Interesting ports on (10.0.0.2):
(The 3060 ports scanned but not shown below are in state: closed)
Port State Service
21/tcp open ftp
70/tcp open gopher
80/tcp open http
135/tcp open loc-srv
135/udp open loc-srv
137/udp open netbios-ns
138/udp open netbios-dgm
139/tcp open netbios-ssn
500/udp open isakmp

Nmap run completed -- 1 IP address (1 host up) scanned in 8 seconds

As you can see from this scan, three ports are identified with NetBIOS. This tells us that we could set nmap to scan a large number of Internet addresses, only looking for port 139 on each. To learn how to set up nmap to run this way, in your Unix or Linux shell give the command "man nmap".

For more on what crackers do once they break into a computer using NetBIOS (like installing back doors), see http://happyhacker.org/gtmhh/vol3no10.shtml .

********************
You can get punched in the nose warning: if you use a port scanner against networks that haven't given you permission to scan, you will be waving a red flag that says "Whaddaya wanna bet I'm a computer criminal?" You can't get arrested for merely port scanning, but people who don't like being scanned might get you kicked off your Internet service provider.

You can get really, big time, punched in the nose warning: If you visit the same computer or LAN really often to see what's new and to try different things, even if you don't break the law you'd better be doing it with the permission of the owner. Otherwise you may make enemies who might crash or destroy your operating system. And that is only what they may do when feeling mellow. After a night of hard drinking - well, you don't want to find out.
********************

How to Play NetBIOS Wargames

What if you want to challenge your friends to a hacker wargame using NetBIOS? The first thing to do is *don't* email me asking me to break in for you. Sheesh. Seriously, almost every day I get emails from people claiming to have permission from their girlfriend/boyfriend and begging me to help them break in. You can read their hilarious pleas for help at http://happyhacker.org/sucks/ <../sucks/index.shtml> .

The way to run a hacker wargame over the Internet is first, get permission from your Internet provider so they don't kick you off for hacking. They probably run an IDS that scans users for suspicious activity. They probably hate malicious hackers. Enough said.

Second, you and your friends are likely to be at a different Internet address every time you log on. Your safest way to play over the Internet is for each player to get an Internet address that is the same every time he or she logs on: a "static" address. This way you won't accidentally break into someone else's computer.

You have to arrange with your Internet provider to get a static address. Normally only a local provider can do this for you. A big advantage of using a local provider is you can make friends with the people who work there - and they are probably hackers.

If you live in an apartment building or dormitory with other hackers, you can play break-in games without using the Internet. Set up a LAN where you can play together. For example, you can string Ethernet cable from window to window. To learn how to set up a Windows Ethernet LAN, see http://happyhacker.org/gtmhh/winlan.shtml .

Or you could set up a wireless LAN. With wireless you never know who might come cruising with a laptop down the street by your home or business and break in. That can make a wargame lots more fun. For help on how to break into wireless LANs (it's pathetically easy), see .

**************
Evil genius tip: Attack using a Win NT server with the Microsoft Resource Kit installed. Heh, heh. With it you can give the command:

C:\>Local Administrators \\

This should show all user accounts with administrator rights on targetbox.com.

C:\>Global Administrators \\

This should show all user accounts with Domain administrative rights. These are exceptionally worth compromising, because with one Domain administrative password you will be able to control many resources among NT servers, workstations, and Win 95/98 computers.

I've tried to install the Resource Kit on XP Professional, but it wasn't compatible.

Another option is to install hacker tools such as Red Button and DumpACL, which extract information on user names, hashes, and which services are running on a given machine.
**************

Help for users of Windows 95, 98, SE or ME

To enable NetBIOS, click

Control Panel -> Network -> Protocols

If you see both NetBEUI and TCP/IP, you are already using NetBIOS. If not, add NetBEUI.

To bring up the command screen, click Start -> Run and type in command.com.

How to hack Windows XP Admin Passwords

2012-06-02T22:50:00.000-07:00

How to hack Windows XP Admin Passwords

How to hack Windows XP Admin Passwords

------------------------------------------------------------------------------

This hack will only work if the person that owns the machine
has no intelligence. This is how it works:

When you or anyone installs Windows XP for the first time your
asked to put in your username and up to five others.

Now, unknownst to a lot of other people this is the only place in
Windows XP that you can password the default Administrator Diagnostic
Account. This means that to by pass most administrators accounts
on Windows XP all you have to do is boot to safe mode by pressing F8
during boot up and choosing it. Log into the Administrator Account
and create your own or change the password on the current Account.

This only works if the user on setup specified a password for the
Administrator Account.

This has worked for me on both Windows XP Home and Pro.

-----------------------------------------------------------------------------

Now this one seems to be machine dependant, it works randomly(don't know why)

If you log into a limited account on your target machine and open up a dos prompt
then enter this set of commands Exactly:

(this appeared on www.astalavista.com a few days ago but i found that it wouldn't work
on the welcome screen of a normal booted machine)

-----------------------------------------------------------------------------

cd\ *drops to root
cd\windows\system32 *directs to the system32 dir
mkdir temphack *creates the folder temphack
copy logon.scr temphack\logon.scr *backsup logon.scr
copy cmd.exe temphack\cmd.exe *backsup cmd.exe
del logon.scr *deletes original logon.scr
rename cmd.exe logon.scr *renames cmd.exe to logon.scr
exit *quits dos

-----------------------------------------------------------------------------

Now what you have just done is told the computer to backup the command program
and the screen saver file, then edits the settings so when the machine boots the
screen saver you will get an unprotected dos prompt with out logging into XP.

Once this happens if you enter this command minus the quotes

"net user password"

If the Administrator Account is called Frank and you want the password blah enter this

"net user Frank blah"

and this changes the password on franks machine to blah and your in.

Have fun

p.s: dont forget to copy the contents of temphack back into the system32 dir to cover tracks

Any updates, Errors, Suggestions or just general comments mail them to either

Estyle89@hotmail.com
jaoibh@hotmail.com

Hacking Unix passwords

2012-06-02T22:48:00.000-07:00

Here's how to use it in a nutshell...

Download the passwd file from your local unix site, or have someone download
it for you. It should be in the unix format (that is, line feeds but no
carriage returns) so don't run it through any conversion programs--Brute uses
it "as-is".

To check a single password against your list do this:

BRUTE passwd Password

(that would check the passwd file for the password "Password"). Brute is
case sensitive (just as unix is), so "Password" is different than "password".

To convince yourself that brute actually works you'll probably want to run it
with your password and see that it pulls up your account. It will.

---

Brute can be used with a list of passwords. In this case, edit up a list or
use a pre-made one (one password per line) and call brute like this:

BRUTE passwd @passlist.txt

(where passlist.txt is the name of your list-of-passwords. The @ sign tells
brute that you're using list file). Note that you don't have to use the name
"passlist.txt" for your word list, and you don't have to use the name
"passwd" for the password file. This allows you to keep separate word lists
for different types of unix sites, and separate password files.

Right now that's about it. There are a few enhancements I'm planning in the
future, but this ought to do the trick for you. Any passwords found are
written to the file "PWD_HITS.DAT".

Brute ignores unpassworded and invalidly-passworded accounts automatically,
so you should probably check the passwd file for these babys yourself.

---

Brute is about 25% faster than it's nearest competitor.

Have fun.

Prometheus

---

Version 1.1: Fixed the icky short int bug which causes the "Password"
              counter to go negative after 32k attempts (changed to long
              int--now it will go negative should you reach 2 billion
              attempts in a single setting, which isn't extrememly likely.

              Added the "" password to check for the username as a password
              (forward and reversed). Either put on a line by itself in
              your word list file, or call brute like this: brute passwd *
              ---

Version 2.0: I'm using the fastcrypt routine as ported to DOS by Gandalf and
              distributed in OBJ form by sir hackalot. I haven't measured
              the speed increase, but it's not as much as I had hoped. Maybe
              twice as fast. Anyhow, such is life.

    ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ
    ÜÝÄ’œ›Š úúúúúúúúúúúúúúú THE HOLLOW'S ALLIANCE úúúúúúúúúúúúúúú AliceÄÞÜ ú
    ÜÝÄ     (415)849-2688      Ÿ‰‰ë æ”r hîŽë       (415)849-2688       ÄÞÜ ú
    ÜÝ ÄÄ Ä Ä Ä Ä Ä Ä   T-file Distribution Cent-a-RoR    Ä Ä Ä Ä Ä Ä ÄÄ ÞÜ ú
    ÜÝDr. Murdock ú Powerful Paul ú RatSnatcher ú Sir Death ú Pressed RatÞÜ ú
    ÜÝ ÄÄ Ä Ä Ä        R o R   -   A l u c a r d        Ä Ä Ä ÄÄ ÞÜ ú
    ÜÝÄ The Corporate Headquarters of Shawn-Da-Lay Boy Productions, Inc.ÄÞÜ ú
    ÜÝÄúúúú Ø úúúúSmooth is the Descent and Easy is the Wayúúúúú Ø úúúúúÄÞÜ ú
    ÜÛßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßßÛÜ ú
      úúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúúú

What is Google Adsense And Its Uses

2012-06-02T08:56:00.000-07:00

Seo Tricks

2012-06-02T08:53:00.000-07:00