Do you know ConfigMgr and OpsMgr?  Microsoft is hiring.

Premier Field Engineers at Microsoft

We are looking for a SCOM/SCCM PFE and a SPS Dev PFE in New York, NY as well as a Platforms PFE in Bentonville, AR and Dearborn, MI.. Know anyone interested, please ping Dana Whitley (dminshew@microsoft.com)

You can bet the PFE in AR is going to be working at Wal-Mart.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

erbium doped fiberhttp://configmgr.com

© Anthony Clendenen

ConfigMgr SP2 beta is now publicly available for download. 

They have added support for the following operating systems:

• Windows 7
• Vista SP2
• Server 2008 SP2 & R2

Also part of SP2 is more support for x64 including

• OpsMgr 2007 client agent
• Remote control for x64 XP and Server 2003
• Updated Management Pack for 64 bit OSes

Other changes include

• Asset Intelligence no longer requires a certificate to sync online
• Faster policy processing
• Faster execution of advertisements configured to run at logon
• Branch cache support for Server 2008 R2 and Windows 7
• Intel AMT version 2

The download is available on Connect.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

MMS 2009 - Live Keynote Webcasts

This year the MMS 2009 Keynotes on Tuesday and Wednesday are being webcast live on the Internet. The keynotes may be viewed live at 8:30am PDT each day via this page: IT Infrastructure Software Spotlight.

The Dynamic Datacenter Tuesday, April 28, 8:30am–9:45am PDT (GMT-8) Bob Kelly, Corporate Vice President, Server & Tools Hear from Microsoft’s Bob Kelly, Corporate Vice President, Server & Tools, on the latest developments in datacenter technologies and Microsoft’s perspective on the dynamic datacenter. Bob will provide insight into the progress and investment Microsoft is making in key datacenter technologies like virtualization and cloud computing to enable IT to drive efficiencies and cost savings today. Managing Clients in a User-Centered World Wednesday, April 29, 8:30am–9:45am PDT (GMT-8) Brad Anderson, General Manager, Management and Solutions Division, Microsoft Corporation With a new generation entering the workforce and changing business conditions, a modern approach to client management is needed. Your users have a growing expectation that they will be able to work from anywhere and have access to their data at any time. Brad Anderson, General Manager of Microsoft’s Management and Solutions Division will discuss the growing need for user centric client management and Microsoft’s approach to delivering and integrating the technologies and processes needed. Learn how Windows 7, together with Application Access and Service Orchestration, empower end users to do their jobs effectively regardless of where they are, while supporting the set of policies and controls important for the needs of the business.

These presentations may also be viewed offline at a later time via the same page.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

backgammon free casino money free craps game play free black jack craps video poker strategy play black jack online how to win video poker casino game online uk best casino online casino secure online gambling jackpot casino online casino black jack learn to play craps how to win at video poker craps online blackjack casino game online casino betting free on line video poker casino games no download casino online gambling casino play free casino slots video poker machine bonus video poker free on line slots double bonus video poker free video poker games free casinos roulette online craps rules free on line casino rules of craps online casino free money blackjack 21 internet casino how to play craps free casino game download fortunelounge online casino free casino download free casino card game free roulette game free casino play no deposit free money casino internet casino online

1E released a new white paper written by Ian Godfrey last week entitled Remote Management of BIOS Configuration, which is centered around configuring Wake-on-LAN but the concepts and tools can be used to manipulate other BIOS settings as well. 

This paper covers a number of different hardware vendors and how to remotely configure the BIOS, something that is not standard across the hardware vendors.  It includes links to different tools, ConfigMgr integration, scripts, tips, troubleshooting, and a very in depth explanation of WOL.  If you are having trouble getting some computers to wake up when they are sent a magic packet or you need to learn how to remote administer the BIOS without touching each computer this is a must read.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

online casinoWe are so proud!!!

1E released a new white paper written by Ian Godfrey last week entitled Remote Management of BIOS Configuration, which is centered around configuring Wake-on-LAN but the concepts and tools can be used to manipulate other BIOS settings as well. 

This paper covers a number of different hardware vendors and how to remotely configure the BIOS, something that is not standard across the hardware vendors.  It includes links to different tools, ConfigMgr integration, scripts, tips, troubleshooting, and a very in depth explanation of WOL.  If you are having trouble getting some computers to wake up when they are sent a magic packet or you need to learn how to remote administer the BIOS without touching each computer this is a must read.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

In my post regarding what’s new in NightWatchman 5.5 I talked about the new NightWatchman Console.  I want to cover the security aspect of the console in this post to show some of the flexibility of the console as well as explain how to set the proper security.

In the NightWatchman Console the last tab on the right is Security, this is to manage the security of the console specifically, not the NightWatchman clients, but which users and groups have what rights in the console.

If you click on the Security tab it shows you the Users and Groups section by default this includes the user or group you specified during the setup who was the Administrator.  This user or group has full rights in the console which is the Systems Administrator role.

If you now click on the Roles tab next to the Users and Groups tab in this section you get a view of the roles and their rights.  From this view you have the options to add a new role and set or modify the permissions of a role.  As you can see the Systems Administrator role cannot be modified so that you don’t lock yourself out of the console completely.

If we add a new role we can then modify the permissions that the users who are assigned that role get when then open the NightWatchman Console.  What I am going to do is add a role for the IT group that manages the retails department.  I want this group to only be able to view and modify the power scheme and shutdown schedules for their particular department, preventing them from making changes to the settings for all other groups.

I do this by first clicking the Add button while still in the Roles tab.  This opens a dialog box asking me for the name and a description of the role.

Notice that in the fields that are required to be filled out there is a stop symbol because I have not filled out the name filed.  This also occurs in other fields in the console, say for instance you try to put in an invalid time in the scheduled shutdown’s time field you will get the same results and won’t be able to save your changes until it is filled out correctly.

I have filled out the name field and description and then clicked OK to create a group called Retail Admins. And it now shows up in the list of Roles in the console.

When I highlight this role I can see that there are no rights assigned to this role, not even the ability to launch the console, this is of course by design. Keeping in mind what my goal is for this group, I am going to assign it the following rights:

It is important to understand the difference between View and View All when assigning roles rights.  Since my plan is to only allow this role to view their group of clients I selected View and not View All as this would allow them to see all the groups in the console.

Notice if you do not click the Apply button and navigate away your changes will be discarded.

Here is what my Roles tab now looks like with the Retail Admins group selected.

Next I need to assign this role to a user or group of users.  If I click on the Users and Groups tab at the top it switches me back to the users and groups view where I can add a new user or group.  You can do this by clicking on the Add button and it will open the AD users and groups dialog where you can input the name of the user or group.  I am going to use a single user in this example but I could have just as easily added a group.  Now that I have a new user listed to the right I see a list of all possible roles that I can assign that user to.  The roles the user has assigned to them is indicated by a stop symbol or a checkmark if they are assigned that role.  By default a new user or group is not assigned any roles.  I am going to assign the new user (Anthony) the role of Retail Admins and then the role has a checkmark next to it to indicate that it has been assigned that role. If I click on the details link next to the role it tells me exactly what rights that role has so that I don’t have to switch back to the roles tab to determine if it has the correct rights before I assign it to a user or group.

Next I need to assign my user to my group of clients.  To do this switch back to the NightWatchman Clients view by clicking on the tab in the top left corner of the console.

In this view you can see the NightWatchman clients in their groups, either by organizationally or by geographic locations since we are picking on the Accounting department we are interested in the organizational grouping.  If you don’t have a group you can create one from this view as well by just right clicking on the parent group and selecting Add Group.  Always keep in mind that the NightWatchman clients are assigned to the lowest tier in the grouping and there must be five levels starting from the highest level, in my example I am going to use the Auditors group and here is my hierarchy in the console.

If you right click on the Auditors group then select Properties from the context menu. When the properties window is displayed click on the Security tab and from the list of users and groups you will see that the users and groups that have the Systems Administrator role show up with the right already assigned to this group but any other group or user does not yet have rights.  To assign a user or group the ability to view this group simply click on them and they will then have a checkmark next to their name.

In this example I have added a group and a new user to demonstrate this and to show you can use groups as well.  Daniel has been assigned the Retail Admin rights but he doesn’t yet have those rights on this group.  Once I click on him he will then have the assigned rights we gave the Retail Admins group to this group of clients.  And that is all there is to it.  Once you click the OK button the user will have the rights to view this group, but this group only.  If you click on the Finance group or any group higher up in the hierarchy and the open the groups properties page on the security tab you will see that any user or group other than those assigned the Systems Administrator role do not have rights to view this group.  You could assign a user or group rights at this level and the lower tier groups under it would also inherit those rights.

As always if you have any questions or comments feel free to contact me.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

Right before Christmas 1E released not only the free tool Service Window that I mentioned in my last post but also new versions of NightWatchman now version 5.5, 1E WakeUp version 5.5, Nomad Enterprise 3.2 and our first version of the NightWatchman console.  Over the last 18 months I had been working with AT&T® to prove out the 1E Power and Patch Management Pack, which is a combination of 1E WakeUp and NightWatchman.  July 31st the deal with AT&T closed and in late October we did a joint press release with AT&T about the savings.  In the end they are going to save about $1 million a month or $60 million dollars over 5 years, and those are pretty modest figures, and I know they are because I actually wrote the report for them based on the pilot data from their AFR server.  They are also going to save 135 million kWh’s of electricity each year while eliminating 124,000 tons of CO2 emissions.  It was a great project and now one of our consultants Richard Fellows has been working with them on the implementation across their 310,000 PC’s.  As is usually the case our customers dictate the new features included in our products and I all of the Solution Engineers at 1E are also now aligned with a single product so we are involved in the entire development cycle, at least as much as we can since we travel a fair amount of time.  But NightWatchman 5.5 is the product I typically spend the most time with also the reporting server as well AFR.

Here is a short list of the new features in version 5.5 of NightWatchman and I will explain most them in more depth below as well as how to configure and use them.

• Sleepless Client Detection - NightWatchman can now achieve even greater power savings by detecting PCs which do not go to sleep when they should. The Administrator is made aware of what is keeping the machine awake and given the opportunity to allow or disallow this from happening in future.
• NightWatchman Console - You can now manage your NightWatchman clients from a centralized secure administration console, providing the simplest mechanism and most control over your NightWatchman installation. Existing methods to manage NightWatchman clients (such as Microsoft Configuration Manager or Group Policy) still work and can be used with or without this new console.
• Maintenance Windows and Alarm Clock - You can now configure PCs to power up according to a schedule which suits both your users and administration needs. With Maintenance Windows your PCs will wake up and remain powered for a length of time before returning to a low power state when scheduled maintenance tasks are complete.
• Keep Active - Extend PC Power Management to PC users, allowing them to ensure their PC remains available to execute tasks while they’re away.
• Active Directory Import Tool - Simplifies and speeds up the task of mapping an existing directory of PCs to the NightWatchman configuration and reporting structure. This wizard based tool deals with conflict detection and resolution and the included import scripts can be modified to best suit your environment.

Keep Active

I will start with the Keep Active feature, it is probably the easiest of the new features to explain.  This is an option that allows the user to decide if they want to keep their PC from being put into a low power state.  This includes a scheduled shutdown as well as the power scheme settings so the computer will not go into any low power states during the Keep Active period.  This is not something you would like your employees to use every day because they could defeat the energy savings program for their computer.  There is going to be some changes in the next version of NightWatchman about how much control you turn back over to the employee.

Usage Scenarios

One example of how someone might use this feature is let’s say Paul Thomsen and I are working late in his office in Redmond and we want to run some automated tests on some of his lab computers but we also don’t want the machines to go into a low power state or shutdown at the scheduled time of 7 PM because we need these tests to complete while we are eating at Azteca we are not sure how long we are going to be over there so we set Keep Active on the lab computers to 2 hours.  That gives us a little time to walk over there eat and get back without our tests being interrupted by the computers going into a low power state from the power scheme settings or the scheduled shutdown time.

How to configure Keep Active

They do this simply by right clicking on the NightWatchman icon in the system tray and selecting “Keep Active”.

Then after they click Keep Active from the context menu it will open a dialog box with a drop down box allowing them to select the amount of time they want to set their computer to keep active. During the Keep Active period the NightWatchman tray icon also changes so the user can turn it back off if they want to.

Maintenance Windows and Alarm Clocks

Maintenance windows and alarm clocks have some similarity to them.  They are both a scheduled wakeup for the NightWatchman client but the alarm clock function is for end users and maintenance windows are for administrators.  The end result is the same for both however, to schedule the computer to come out of a low power state at a certain time on a specific day.

Usage Scenarios

For the Alarm Clock feature this can be used by the employee to schedule when their computer is going to be turned on in the morning so that all (startup) group policies have run or if there are things that happen to the computer that make the boot time in double digits.  Since you can configure the time and for each day if the employee only works 4 – 10’s, then they could schedule their computer to only come on 10 minutes before their start time on those four days of the week so it doesn’t come on the other three days of the week.

The Maintenance Window feature is for the IT staff to be able to schedule a computer or group of computer, to come out a low power state at a scheduled time and then after a your maintenance is completed return the computer back to the low power state it was in for the remainder of the night or weekend.  This is useful for things that you need to do outside of ConfigMgr, say anti-virus scans or updates.

How to Configure Alarm Clocks and Maintenance Windows

The Alarm Clock settings are configured in the NightWatchman console (which I cover below), the Maintenance Window settings are also configured in the NightWatchman console.

You can see this tab is displaying the Maintenance Window, one option is to turn the monitor on when the computer is brought out a low power state for the Maintenance Window.  Usually you would want the monitor to stay off assuming that you schedule your Maintenance Windows for off hours.  As you can see you can schedule or not schedule the Maintenance Window start time for each day separately, how long the computer will remain on, essentially setting the duration of the Maintenance Window.  And then at the end of the Maintenance Window what low power state do you want the computer to go into.  In this first version the low power options are standby and hibernate, off will be coming soon.

Now you can see that I have scheduled a window for Monday, Wednesday and Friday, they are for different durations and Friday I want the system to go back to hibernate.

NightWatchman Console

The NightWatchman console is a server side console to configure the NightWatchman clients.  You can group clients based on business unit and based on physical locations.  For example, what state they are in and what department they are in.  This helps with the reporting portion.  Also as I covered above the Alarm Clock and Maintenance Window settings are configured in the console.  But also the scheduled shutdown times and power scheme policies for the clients, which goes back to the grouping again. 

As you can see from these two images which are the power scheme settings (top) and power policies (bottom) there are a number of settings that you can configure along with each of these.  Traditionally this would have been done with ConfigMgr or group policy but with the NightWatchman console we add another option for administrators to configure the client settings.

Usage Scenarios

The NightWatchman console is targeted at customers who either do not have ConfigMgr or SMS but still need the Wake-on-LAN functionality of 1E WakeUp and for customers that have different groups that will manage NightWatchman and ConfigMgr. 

How To Configure The NightWatchman Console

Configuring the NightWatchman console is more about configuring the clients although there is a Security tab that will allow you to control which users and groups get to see or configure all the settings in the console.

Lets start with an overall of the console.

On the left of the console are the tabs NightWatchman Clients, Power Schemes, Power Policies, Power Consumption and Security. 

• NightWatchman Clients – This is where you can group clients, assign power schemes and power policies to your clients.  You can also see the tabs to display Location Groups and Organization Groups, these are the two types of groups I described above where you can assign clients based on their location and business unit.  Client default into the Unassigned Building for the location groups and into Unassigned Department for organization groups.
• Power Schemes – In this tab you can create, edit and delete power schemes.  Power scheme settings are the settings the control when the monitor goes into standby, the hard drive goes into standby, the computer goes into standby or hibernate and so on.  After you create the power schemes you then assign them to a group.  In this example I have a typical power scheme policy that I have named Accounting Department as it will be assigned to the Accounting departments computers but I could assign it to any other group as well that I wanted to use the same settings on.

• Power Policies – On the Power Policies tab you edit, create and delete policies that control when the group of clients will shutdown, what type of shutdown it is, when and how long the maintenance window is, if there is an alarm clock to wake the computers for the user, process exceptions and sleepless client detection settings amongst other settings.

The last two tabs are Power Consumption and Security.  The Power Consumption tab is used to configure what power figures are used by the different clients in the various states to ensure accurate power, carbon and costs are used in the reports.  This is a very important feature as the various hardware vendors and models use dramatically different amounts of power in all the different power states.  Not having this feature would be like assuming an 8 year old 21” CRT used the same amount of power as my daughters LCD on her Dell Mini.  And trying to figure power costs, consumption and CO2 emissions without these numbers is just a guess – at best.  On the Security tab you configure the security settings for the console, allowing users and groups different levels of rights on all the tabs and their settings.

I will save the last two new features for a future post, this one turned out to be much longer that I anticipated.

As always if you have any questions or comments let me know!

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen

First install this patch MS08-067

Then use this to remove it from any infected computers Malicious Software Removal tool

History: Win32/Conficker.B

—————————————————————————

Background

Win32/Conficker.B exploits a vulnerability in the Windows Server service (SVCHOST.EXE) for Windows 2000, Windows XP, Windows Vista, Windows Server 2003, and Windows 2008. While Microsoft addressed this issue in October with Microsoft Security Bulletin MS08-067, and Forefront antivirus and OneCare (as well as other vendor’s anit-virus products) helped protect against infections, many systems that have not been patched manually through Server Update Services and Microsoft/Windows Update or through Automatic Updates have recently come under attack by this worm.  Attacked systems may lock out users, disable our update services and block access to security-related Web sites:

In response to this threat, Microsoft has:

· Updated the January version of the MSFT to detect and remove variants of Win32/Conficker.B.  You can download this version from the MSRT from either the Microsoft Update site or through its associated Knowledge Base article.

· Created the KB article 962007 “Virus alert about the Win32/Conficker.B worm” to provide public details on the symptoms and removal methods available to address this issue.

· Announced the release of the items and the virus threat itself on the Microsoft Malware Protection Center blog.

It is our hope that these resources can assist you in resolving issues with unpatched, infected systems and that you can apply MS08-067 to any other unpatched systems as soon as possible to avoid this threat.

Regards,
Anthony

Anthony Clendenen | Solutions Engineer | 1E

Microsoft MVP System Center Configuration Manager

http://configmgr.com

© Anthony Clendenen