cornerlearner

VLSI mini and major project best in 2020

2020-01-30T15:13:00.001+05:30

VLSI Mini and major project for ECE 2019 to 2020

1. Reconfigurable Constant Multiplication for FPGAs

2. Design of Power and Area Efficient Approximate Multipliers

3. Multipliers-Driven Perturbation of Coefficients for Low-Power Operation in Reconfigurable FIR Filters

4. A Computationally Efficient Reconfigurable Constant Multiplication Architecture Based on

5. CSD Decoded Vertical–Horizontal Common Sub-Expression Elimination Algorithm

6. Design of Low Power 8-Bit Carry Select Adder Using Adiabatic Logic

7. Hardware Design of an Energy-Efficient High-Throughput Median Filter

8. VLSI Implementation of 3D Integer DCT for Video Coding Standards

9. Low-Cost High-Performance VLSI Architecture for Montgomery Modular Multiplication

10. Pre-Encoded Multipliers Based on Non-Redundant Radix-4 Signed-Digit Encoding

11. Delay Efficient Error Detection and Correction of Parallel IIR Filters using VLSI Algorithms

12. Addition of Miller and Inverted Manchester Encoding Technique to Dedicated Short Range Communication with Full Hardware Utilization

13. Carry Speculative Adder with Variable Latency for Low Power VLSI

14. A New VLSI Algorithm for a High-Throughput Implementation of Type IV DCT

15. Design and Implementation of 64 Bit Multiplier using Vedic Algorithm

16. A 0.3-V 37-nW 53-dB SNDR Asynchronous Delta–Sigma Modulator in 0.18-μm CMOS

17. Exploiting Algorithmic Noise Tolerance for Scalable On-Chip Voltage Regulation

18. Low-Power Near-Threshold 10T SRAM Bit Cells With Enhanced Data-Independent Read Port Leakage for Array Augmentation in 32-nm CMOS

19. Radiation-Hardened 14T SRAM Bitcell With Speed and Power Optimized for Space Application

20. An Accurate and Noise-Resilient Spread-Spectrum Clock Tracking Aid for Digitally-Controlled Clock and Data Recovery Loops

21. VLSI Design of an ML-Based Power-Efficient Motion Estimation Controller for Intelligent Mobile Systems

22.Fast Neural Network Training on FPGA Using Quasi-Newton Optimization Method

23.

A 2.5-ps Bin Size and 6.7-ps ResolutionFPGA Time-to-DigitalConverter Basedon Delay Wrapping and Averaging 24. Write-Amount-Aware Management Policies for STT-RAM Caches 25. Soft Error Rate Reduction of Combinational Circuits Using Gate Sizing in the Presence of Process Variations

Design and Implementation of Efficient Systolic Array Architecture:
To objective of this project is to develop a hardware model of systolic array multiplier which can be used to perform binary multiplication using VHDL platform. This design is implemented on FPGA and simulated in Isim software.
VHDL Environment for Floating Point Arithmetic Logic Unit : This project aims to design and simulate the pipeline approach based floating point ALU using VHDL. This pipelining approach allows the multiple instructions to execute simultaneously.
Design and Implementation of High Speed DDR SDRAM Controller: This project implements a burst data transfer based high speed DDR SDRAM controller that synchronizes the transfer of data between DDR SDRAM and the rest of embedded system circuitry. This code is developed by using VHDL.
Design and Synthesis of QPSK: In this project, one of the popular modulation technique used in satellite radio applications i.e., QPSK modulation is implemented by using reversible logic gates. This modulation technique is modeled using VHDL code.
Design of Multi Value Logic Using Quantum Dot Gate FET: This project aims to increase the bit handling capacity of logic circuits by designing a circuit model of three-stage quantum dot gate field effect transistors (QDGFETs). This three stage design is implemented for different combinational circuits like comparator and decoder.
Design and Simulation of FFT Processor Using Radix-4 Algorithm Using FPGA: This project simulates and synthesizes the 256-point Fast Fourier Transform (FFT) processor with Radix-4 algorithm which is popularly used in WLAN and Orthogonal Frequency Division Multiplexer (OFDM). This project is designed by using VHDL coding.
Design and Implementation of 32 Â– bit RISC Processor: The main objective of this paper is to implement a 32 bit Reduced Instruction Set Computer (RISC) using XILINK VIRTEX4 tool. In this design 16 set instructions are designed where each instruction is executed in one clock cycle with 5 stage pipelining technique.
VHDL Model of Smart Sensor: The aim of this project is to build a VHDL model of smart sensor by implementing algorithm for smart sensor with noise cancellation using IEEE 1451 communication standard. The complete simulation of this project is carried by VHDL program.
Fuzzy based PID Controller using VHDL for Transportation Application: This project implements the PID controller for cruise system in order to avoid the collision between the vehicles. This PID controller is implemented based on Fuzzy algorithm which is simulated using VHDL language.
Implementation of Bus Bridge between AHB and OCP: The basic idea of this project is to design a bus bridge between common and standard protocols namely Advanced High performance Bus (AHB) and Open Core Protocol (OCP) which are popular communication protocols used in System On-chip applications.
Design of Control Area Network Protocol: This project aims to design a Controlled Area Network (CAN) protocol using Verilog HDL code by using Eight Â–to- Eleven modulation technique in place of conventional Software Bit Stuffing (SBS) technique.
DMA Controller for AMBA Bus IP Core: This project gives the complete development process of DMA controller for an on-board computer using VHDL code. This FPGA based DMA controller can be useful for satellite on-board computers.
High Precision Stepper Motor Controller Implementation on FPGA: The aim of this project is to design FPGA based stepper motor controller using VHDL code. The control function of the stepper is achieved by implementing Pulse Width Modulation technique.
Design and Modeling of I2C Bus Controller: The
Design of Cache Memory with Cache Controller Using VHDL: The main aim of this project is to design FPGA based cache memory for detecting the cache miss and also to implement a cache controller for tracking the cache miss in cache memory. This design is performed by mixed style of modeling in VHDL.
An On Chip Design for Prepaid Electricity Billing System: The purpose of this circuit design is to implement an advanced and highly reliable prepaid electronic energy meter using VLSI technology. This VLSI design is implemented by ASIC design by modeling and simulating in this project.
High Speed Network Devices Using SRL16 Reconfigurable Content Addressable Memory (RCAM): In this project, SRL16 Content Addressable Memory (CAM) unit is designed by using VHDL and FPGA technique. Compared with the traditional CAM design methods, this design gives better results in terms of parallel and fast search capabilities.
IP-SRAM Architecture at Deep Submicron CMOS Technology : This project reduces the power dissipation in VLSI circuits by designing new SRAM architecture with IP-SRAM technique. This architecture is designed using 180nm technology.
Glitch free NAND based Digitally Controlled Delay Line for Spread Spectrum Clock Generator: The objective of this project is to avoid the glitch problem in conventional NAND based digital control delay lines (DLDL). This project deals with the implementation of glitch free NAND based DCDL on SSGC (Spread Spectrum Clock Generator).
Performance Analysis of Different Bit Carry Look Ahead Adder Using VHDL Environment : This project aims to design, simulate, test and implement different bit Carry Look Ahead (CLA) adder based on VHDL and to compare their results. In this 4, 8 and 16-bit CLA adders are implemented using VHDL and simulated using Modelsim software.
High speed VLSI implementation of 256-bit Parallel Prefix Adders: This project present the new approach for the redesign of parallel prefix adders with 128 width operands of different parallel adders on Xilink Sprtan FPGA. This VLSI based design gives better performance than that of conventional adders.
FPGA Implementation of Mutual Authentication Protocol using Modular Arithmetic: This project aims to design hardware efficient protocol for RFID system by implementing tag-reader mutual authentication scheme which is more secure for external attacks and also consumes less logic elements. This is designed by VHDL and simulated in Xilink simulator.

Communication based mini and major project for ECE

2020-01-30T15:06:00.000+05:30

Communication based Engineering Project work for ECE

Here, we have listed out some important and useful projects based on electronics and communication. These projects are mainly helpful for final year engineering students. These project ideas include projects based on various categories like DTMF, GSM, RF, RFID, Smartcard, etc.

Wireless communication is defined as the transfer of information over a distance without using any enhanced electrical conductors or wires. The distance may be short or long depends on the requirements and availabilities.

There are many projects related to wireless communication. So, let us once look at some of wireless communication based projects ideas collected especially for engineering students. We hope these project ideas are more helpful to many final year students to complete their B.Tech successfully

TYPES:

Communication using MATLAB
Communication Projects using Labview
Bluetooth Communication Projects
GSM Communication Projects
DTMF Projects
Zigbee Projects
Miscellaneous
Wireless Communication Project Ideas
- Wireless Power Transfer
- Wireless Message Communication Between Two Computers
- Wireless Electronic Notice Board Using GSM
- Wireless Over Temperature Alarm
- Automatic Wireless Health Monitoring System in Hospitals for Patients
- War Field Spying Robot with Night Vision Wireless Camera
- Wireless Audio Transmitter for TV
- Tampered Energy Meter Information Conveyed to Concerned Authority by Wireless Communication
- Fire Fighting Robotic Vehicle
You may get the abstract, block diagram and output videos of the above projects by clicking on those corresponding titles.

Look at some more new wireless communication project ideas which may be implemented.

>>> Android Based PLC Data Monitoring Interface

with Industrial Data

>>> Energy-Efficient D2D Communication Based Retransmission Scheme for Reliable Multicast in Wireless Cellular Network

Communication using MATLAB

Intelligent approach to video transmission over 2.4 GHz wireless technology : This paper researches a new method for the transmission of MPEG video over a 2.4 GHZ network using MATLAB. It implements neural-fuzzy controller and a rule-based fuzzy controller in the design. Results show that this method improves the data loss and improves the image quality.
Grasping money game used in wireless channel resource allocation: With the increase in communication technology many wireless communication devices have been introduced, which crowded the wireless channels. Grasping money game is a technique used for allocating resources in wireless channels. This paper researches on this technique.

Communication Projects using Labview

Design and Development of Virtual Instrumentation System for Disabled using Labview: This paper develops a virtual system that aids deaf and dumb to communicate with the world. It collects the hand gestures from the user and converts it into a voice using Labview.
AES-256 Encryption in Communication using Labview: This paper studies a new scheme to enhance security of WPN network. Here AES technique is implemented for encryption algorithm.

Vehicle Tracking System
Accident Identification System
Wireless Camera Position System
Remote Home Security System
Wireless Voting Machine
Wireless Security System
Video Signal Transmitter
Audio Signal Transmitter
Remote Controlled Dish Antenna
Wireless Home Appliances Controller
Centralized Monitoring System for Taxies
Cryptographic Secured Communication Between Army Stations
Wireless Audio Communication System
Wireless Traffic Light Controller
Wireless Motor Monitoring System
Wireless Transformer Monitoring System
Remote Industrial Security System
Intelligent Wireless Controller for Oil Wells
Wireless Attendance Recorder
Wireless Process Controller
File Sharing Using Bluetooth
Simple Radar Communication System
Wireless Hospital Management System
Wireless Temperature Monitoring on Remote Seven-segment Display using RF
Zigbee based Secured Wireless Data transmission and Reception
Wireless Electrical Apparatus Control System with Speed Control of AC motor in a plant using RF communication
Wireless DC Motor Speed and Direction Control using RF Communication
Bluetooth based Wireless Device control for Industrial Automation
Streetlight Power Cable Monitoring System Based on Wireless Sensor Networks using Zigbee communication.
Zigbee based Wireless Electronic Notice Board with Multi Point Receivers
Bluetooth based Robot Control for Metal Detection Applications
Wireless Electrical Apparatus Control System using IR communication
RF based tsunami detection and remote alert system with 60dB siren
Wireless Electronic Notice Board with Multi Point Receivers using RF Communication System
Wireless DC Motor Speed and Direction Control using IR (PWM and H-Bridge)
Wireless Stepper Motor Control using RF Communication
Two-way Wireless Data Messaging System for Rural Areas using Zigbee Technology
Zigbee based wireless remote weather station monitoring system
Wireless Data Encryption and Decryption for Secured Communication using RF
Wireless Stepper Motor Control using IR Communication
Wireless Ac Motor Speed Control Using TRIAC
PC Regimented Defense Android Using Zigbee
Wireless AC/DC Device control for Appliances Using Remote Control

GSM Communication Projects

GSM Based Home Security Alarm System Using Arduino: The project shown here provides security to the home. When any intruder enters home it sends a message to the owner using GSM. Intruder is detected using PIR sensor.
GSM Controlled Robot using Microcontroller: Here is project showing robot controlled using GSM .Here AT89c51 microcontroller is used for controlling the robot.
GSM Interfacing with 8051: The main principle of this circuit is to interface a GSM modem with the microcontroller. The microcontroller used is AT89C51 microcontroller.
Wireless Electronic Notice Board using GSM: This wireless electronic notice board using GSM Technology and microcontroller circuit is used to display the data on LCD whatever we sent from the mobile.
Remote Industrial Security System: A wireless based industrial security system is designed here. The system is based on GSM communication and the main component is a microcontroller. The main reason for choosing GSM as the mode for communication is the range of GSM is very large and can send and receive signals or messages from any remote place. Some of the sensors used in this system are proximity, light, gas and smoke sensors.
Centralized Monitoring System for Taxies: Taxis are one of the common modes of transportation in cities. For the safety of the passengers and accurate information about distance and fare, a system is proposed for monitoring taxis. Using this system, police can monitor all the taxis without any hassle. It is based on GPS technology and also uses GSM for sending messages to the customer.
Wireless Weather Monitoring based on GSM : A wireless weather sensing and monitoring system is proposed here. It consists of different sensors like temperature, humidity, light etc. and displays this information on an LCD. Also, a GSM module is used so that the information can be sent to a remote system via SMS. Using this system, weather can be monitored without actually being present in that place.

DTMF Projects

DTMF Controlled Robot without Microcontroller: Here a DTMF controlled robot without any microcontroller is shown.
DTMF Controlled Home Automation System Circuit: The system shown here automates the home using DTMF technology. This system can control only 16 devices at a time as there are only 16 DTMF tones available in the mobile.

Zigbee Projects

Restaurant Management System Project: Here is project that shows automation of restaurants. It uses zigbee for communication between the user and server in the restaurant.
Zigbee Based Defense Robot: This video shows a zigbee controlled defence robot. It is controlled using a PC .This robot collects the information about the enemies and sends it to control room. It then takes the necessary actions like gun shooting according to the instruction given from the control room.

VEDA IIT Sample Questions Paper

2020-01-22T12:52:00.001+05:30

VEDA IIT Junior Engineer Trainee sample exam Questions

https://cornerlearner.blogspot.com/2020/01/veda-iit-jr-engineer-trainees-2020.html?m=1

Aptitude sample Questions

1. 90 people applied for a job as a salesperson for a book publishing company. 10 of the applicants had never worked in sales or in publishing business. 65 had worked in sales at some point and 58 had some background in publishing.How many of the applicants had experience in both sales and publishing ?

2.If one worker can complete a job in 6 days and a second worker can complete the same job in 12 days, how long will it take if both work together ?

3.Ram and Shyam went to purchase a book from a bookshop. Unfortunately,neither of them had enough money, though both had some money . Ram realized he was Rs 2 short of the price of the book, while Shyam was Rs 24 short of the price. When they put their money together , even then they did not have enough money to buy the book. What was the price of the book ?

4.A train passes a station in 36 s and a man standing on the platform in 20 s. If the speed of the train is 15 meters/sec the length of the platform is ———-.x

5. If is80% of y, then what percent of 2x is y ?

Logical Design and Number System

Logical Design

1.When the equivalent decimal value of the given 2’s Complement number (101101110011110.1)

2.Design a 4-input NAND gate using only 2-input NAND gates.

3.Design the given function F(A,B,C) = ∑ (0, 1, 3, 4, 6) using only 4 – to – 1 multiplexer.

4.Design the synchronous circuit whose functionality is described by following waveform using D flip-flops and necessary logic.

5.Draw the Synchronous Moore FSM for detecting the non-overlapping 1011 pattern.

Microprocessor

1.What are all the signals associated with read operation in 8086 microprocessor?

2.Explainhow interrupt mechanism works in 8086 microprocessor?

3.Listthe general purpose registers present in 8086 microprocessor and their use?

4.Whatare the maximum address spaces and I/O spaces available in 8086 processor?

5.Listfour different instructions in 8086 processor which can be used to clear the contents of accumulator?

C Programming

Fill in the blanks:

1.Memory used by a variable of type short int is ___________ bytes.

2.__________has the highest precedence above all operators.

Program:

1.Write a program to find if an input character is a digit ,a lower case character, an upper case character or a special character.

VEDA IIT Jr engineer trainees 2020 || Syllabus topic Exam Patten

2020-01-22T12:46:00.000+05:30

VEDA IIT Jr. Engineer Trainee 2020

Syllabus & Test Pattern:
The focus of the exam is to evaluate the applicant’s knowledge in Digital, Microprocessors, C Programming and aptitude.
Presence of mind, attitude, intuition and ability to apply knowledge will be important for success in the exam.
The written exam comprises of 1 mark, 2 marks, 3 marks/4 marks questions in the following pattern
Fill in the blanks
Short Answers Questions
Problems

Examination Syllabus for Main test :

*Applicants need to bring their own pencils, pens, erasers etc. Question paper cum answer booklet will be provided at the center.

Sample Questions with Online Exam With India Bix click below link for syllabus online exam and Sample Questions

https://cornerlearner.blogspot.com/2020/01/veda-iit-sample-questions-paper.html?m=1

Basic Electronics & Aptitude

Click on below link to get sample Questions with online test

https://cornerlearner.blogspot.com/2020/01/veda-iit-sample-questions-paper.html?m=1

DRDO-CEPTAM Multi Tasking Staff syllabus 2020 || exam patten

2020-01-21T23:12:00.003+05:30

DRDO-CEPTAM Multi Tasking Staff syllabus 2020 || exam patten

DRDO has invited online applications for the recruitment of 1817 vacant posts of Multi Tasking Staff (MTS), General Central Service Group ‘C’, Non-Gazetted, Ministerial Post. Defence Research and Development Organisation (DRDO) works under the Ministry of Defence (GOI) and is conducts Research & Development in the state-of-the-art battlefields systems required by Indian Armed Forces, viz. Army, Navy & Air Force. DRDO has more than 60 laboratories spread across India, working in diversified research areas across the spectrum of science.

DRDO CEPTAM MTS 2020 Exam Pattern
Tier/ Mode/ Type of Exam	Subjects	Number of Questions (1 mark each)	Duration of Exam
*Tier-1/ CBT (Screening)**	General Intelligence & Reasoning Ability	35	90 Minutes (1 Hour 30 Mins) PwD Candidates will get extra 20 mins
	General Awareness	30
	Quantitative Aptitude & Numerical Ability	35
Total		100
Tier-2/ CBT (Final Selection)	General Science	40	90 Minutes (1 Hour 30 Mins) PwD Candidates will get extra 20 mins
	General Math	40
	General English	20
Total		100

The minimum qualifying marks for Tier-I is 40% for UR/ESM/OBC.
Qualifying marks for SC/ST for Tier-I is 35%.
The shortlisting of candidates for Tier-II will be done in the ratio to 1:10

DRDO CEPTAM MTS Details :

https://cornerlearner.blogspot.com/2020/01/drdo-ceptam-multi-tasking-staff.html

Syllabus:

https://cornerlearner.blogspot.com/2020/01/drdo-ceptam-mts-syllabus-2020-get-drdo.html

DRDO Syllabus 2020 for General Intelligence & Reasoning

• Decision making

• Non-Verbal Series.

• Alphabet Series.

• Number Series.

• Analogy.

• Number Ranking.

• Arithmetical Computation.

• Arithmetical Number Series.

• Problem Solving.

• Judgment

• Discriminating observation

DRDO CEPTAM MTS Syllabus 2020 for English

• Grammar.

• Antonyms.

• Subject-Verb Agreement.

• Articles.

• Sentence Rearrangement.

• Fill in the Blanks.

• Adverb.

• Comprehension.

• Error Correction.

• Idioms & Phrases.

• Synonyms

• Active Voice & Passive Voice.

• Vocabulary.

• Unseen Passages.

• Verb.

• Parts of Speech.

• Tenses.

• Degrees of Comparision

drdo.gov.in MTS Syllabus 2020 for General Awareness

• History.

• Culture.

• Sports and Games.

• Abbreviations.

• Important Financial & Economic News.

• General Politics.

• Current Affairs – National & International.

• Economic Science.

• Books and Authors.

• Geography.

• Science – Inventions & Discoveries.

• Indian Constitution.

• Awards and Honors.

• Current events.

• Books.

• Important Days.

DRDO CEPTAM Syllabus 2020 for General Maths

• Average

• Partnership

• Fundamental Arithmetical operations

• Time & Distance

• Mensuration And Other Related Topics.

• Discount

• Percentages

• Ration and Proportion

• Profit and Loss

• Time & Work

• Simple Interest

DRDO Multi Tasking Staff Syllabus 2020 for Arithmetic Ability

• Tables and Graphs.

• Discounts.

• Ratio and Time.

• HCF & LCM.

• Time and Work.

• Mensuration.

• Profit and Loss.

• Fundamental arithmetical operations

• Data Interpretation etc.

• Number System.

• Time and Distance.

• Computation of Whole Numbers

• Averages.

• Simple & Compound Interest.

• Use of Tables and Graphs.

• Percentages.

• Simplification.

• Relationship between Numbers

• Decimal & Fractions.

Defense Research and Development Organization Syllabus for General Science

Biology

• Food and Nutrition

• Human Reproductive system

• The five kingdoms of life

• Mode of Nutrition in Animal

• Human Digestive system

• Human Diseases

• Nuclear fission and nuclear fusion

• Nutrition in Animal

• Sexual Reproduction in Animal

• Excretory system in Humans

• Respiration in Animals

• Plant tissue

• Photosynthesis

• Plant Morphology

• Classification of Organisms.

• Cytology

• Classification of Plant Kingdom

• Classification of Animal Kingdom

• Genetics

• Structure of Plant and Animal Cell

• Cell: Structure and Functions

• The transport system in Plant

• Human Circulatory system.

• The Heart

• Functions of Blood

• Asexual Reproduction in Plants

• Plant Hormones

• Respiration and Excretion in plants

• Composition of Blood

• Sexual Reproduction in Flowering Plant

• The Cell: The foundation of all living things

• Mode of Nutrition in Plant

• Control and Coordination in Plant

Chemistry

• Fertilizers

• Metallurgy

• Fuels

• Atomic Structure

• Concepts of PH scale

• Chemical Reactions

• Acids, Base, and Salts

• Catalyst

• Hydrocarbons

• Chemical Bonding

• Carbon and it’s Compound

• Behavior of Gases

• Metals and Non-metals

• Radioactivity

Physics

• Electromagnetism

• Wave

• Sound Wave

• Heat & Thermodynamics

• Light

• Atomic and Nuclear Physics

• Units & Dimensions

• Scientific Instruments.

• Floatation

• Current Electricity

• Inventions

• Simple Harmonic Motion

• Magnetism

• Work, Energy, and Power

• Surface Tension

• Viscosity

• Gravitation

• Pressure

• Motion

• The kinetic theory of matter

• Elasticity

• Magnetic effect of electric current

Thanks for Visit Cornerlearner.blogspot.com

Keep Follow and comment Below If you Help

https://www.youtube.com/channel/UCRo3yjBdl-_ip9cP5r4rDfg

Follow for update news and information about education,technology,politics,entertainment

cornerlearnernews.blogspot.com

DRDO CEPTAM MTS Syllabus 2020 | Get DRDO Multi Tasking Staff Exam Pattern

2020-01-21T23:12:00.000+05:30

DRDO CEPTAM MTS Syllabus 2020 | Get DRDO Multi Tasking Staff Exam Pattern

DRDO MTS Syllabus 2020

DRDO CEPTAM MTS Syllabus 2020 is available in Pdf format. Aspirants appearing for DRDO

MTS Written Examination is going to get the DRDO Multi Tasking Staff Syllabus & DRDO CEPTAM

Exam Pattern from here. Soon after knowing the DRDO Syllabus & Exam Pattern, all the applicants

must start their preparation for the exam. In this article, We have enclosed the DRDO MTS Study Materials, Books, Tips & Tricks required to score good marks in the exam. You can download

the Defense Research and Development Organization Syllabus 2020 from the direct links attached

at the bottom of this page for the applicant’s reference.

Online apply & Notification || Exam Details || Fee Details CLICK BELOW LINK:

https://cornerlearner.blogspot.com/2020/01/name-of-post-ceptam-tasking-staff.html

DRDO CEPTAM MTS 2020 Exam Pattern
Tier/ Mode/ Type of Exam	Subjects	Number of Questions (1 mark each)	Duration of Exam
*Tier-1/ CBT (Screening)**	General Intelligence & Reasoning Ability	35	90 Minutes (1 Hour 30 Mins) PwD Candidates will get extra 20 mins
	General Awareness	30
	Quantitative Aptitude & Numerical Ability	35
Total		100
Tier-2/ CBT (Final Selection)	General Science	40	90 Minutes (1 Hour 30 Mins) PwD Candidates will get extra 20 mins
	General Math	40
	General English	20
Total		100

The minimum qualifying marks for Tier-I is 40% for UR/ESM/OBC.
Qualifying marks for SC/ST for Tier-I is 35%.
The shortlisting of candidates for Tier-II will be done in the ratio to 1:10

Syllabus CBT-1 All topics and exam Patten Click Below

https://cornerlearner.blogspot.com/2020/01/drdo-ceptam-multi-tasking-staff.html

Scope of Examination	No of Questions	No of Marks
General Intelligence & Reasoning Ability	35	35
General Awareness	30	30
Quantitative Aptitude & Numerical Ability	35	35
Total	100	100

Notification and Online Apply link Click Below link:

https://cornerlearner.blogspot.com/2020/01/name-of-post-ceptam-tasking-staff.html

Below are some Important Dates for the DRDO CEPTAM 2020 MTS Exam:

Important Dates for DRDO CEPTAM 2020 MTS Exam
Opening Date for Online Application	23^rd December 2019 (10:00 AM)
Closing Date for Submission Of Application	23^rd January 2020 (5:00 PM)
Crucial Date of Eligibility	23^rd January 2020
Tentative Date OF Tier-I Exam (CBT)	To be Announced On DRDO Website

Let’s look at the Exam Pattern and Syllabus of the DRDO CEPTAM 2020 MTS Exam in detail:

How to Download DRDO MTS Admit Card?

Admit card for DRDO CEPTAM MTS 2020 will be available on the official website of DRDO prior to 2 weeks from the examination. Candidate should frequently check the official website. Here are the steps to download admit card.

First, Visit the official website of DRDO.
Click on Careers/Recruitment.
Select Other Recruitment, You will be directed to the CEPTAM page.
Check whether the notification for admit cards is out or not.
Enter your Registration no. and Password.
Download the admit card and keep the copy for future References.

DRDO MTS Examination Centers:

For Tier-I examination, candidates have to register 3 different examination center from the list of examination center given below.

AGRA	COIMBATOR	ITANAGAR	LUCKNOW	PRAYAGRAJ
AHEMDABAD	DEHRADUN	JABALPUR	MUMBAI	PUNE
AURANGABAD	DELHI	JAIPUR	MYSORE	RAIPUR
BENGLURU	GORAKHPUR	JAMMU	NAGPUR	RANCHI
BHOPAL	GUWAHATI	JODHPUR	NASIK	SILIGUDI
BHUBNESHWAR	GWALIOR	KANPUR	PANAJI	THIRUVANTHAPURAM
CHANDIGARH	HYDERABAD	KOCHI	PATNA	VARANASI
CHENNAI	IMPHAL	KOLKATA	PORT BLAIR	VIJAYWADA

Frequently Asked Question Regarding DRDO MTS Recruitment 2020

What should I carry to the examination centre?

Candidates are allowed to carry Admit card, 2 photographs, and an original id (Driving license, Adhaar card, Voter id,etc.) Date of birth should be properly mentioned on the i.d.

Admit card is the same for tier –I and II?

NO, you will be issued a new admit card for tier-II examination which will be available prior to two weeks of examination.

How to enter date of birth in login screen?

The format for entering D.O.B in login screen are DD-MM-YYYY.

Are rings are allowed in fingers during the exam?

Well, for this please refer to the detailed notification, Electronic items such as watches, mobiles etc. Are strictly prohibited in exam hall.

What are the expected dates for result?

There is no updates about the result. Once the exam is conducted we will notify you the expected dates of results.

Please suggest your valuable feedback and if you have any queries related to DRDO MTS Syllabus, feel free to ask below in the comment section. Thus, for more updates bookmark our page.

List of ECE projects idea

2020-01-19T12:51:00.000+05:30

Mini and Major Project For ECE BTech

https://cornerlearner.blogspot.com/2020/01/mini-major-project-work-for-ece.html?m=1

List of ECE Projects Ideas:

DTMF Controlled Robot: This simple DTMF based Cellphone controlled robotic vehicle circuit is designed without using microcontroller and is used in industries and surveillance systems.
Bluetooth Controlled Home Appliances: This circuit explains you how to control the electrical appliances using an Android device. Here, Bluetooth module is interfaced to 8051 microcontroller. This Bluetooth receives the commands from the Android application device using wireless communication.
Metal Detecting Robot: Here, we use a metal detection robot which works on RF technology. Land mines buried under the ground causes threat to the lives and affect the economy of the nation. Detection and removing of these mines manually is a dangerous task.
Password based Circuit Breaker: This password based circuit breaker project is built using 8051 controller and is used to switch off the power supply to the line by entering a password.
Auto Intensity Control of Street Lights: This is a simple circuit that automatically controls the intensity of street lights which is designed using microcontroller and LEDs.
Line Following Robotic Circuit using Microcontroller: This line follower robot is a basic robot that follows a specific path indicated by a line having some particular width.

Contactless Digital Tachometer using 8051 Microcontroller: Here we designed a simple non contact tachometer using microcontroller which can measure speed with an accuracy of 1 rev/sec.
Density Based Traffic Signals using Microcontroller: In this system, we use IR sensors to measure the traffic density. We have to arrange one IR sensor for each road; these sensors always sense the traffic on that particular road. All these sensors are interfaced to the microcontroller. Based on these sensors, controller detects the traffic and controls the traffic system.
Automatic Railway Gate Controller with High Speed Alerting System: The main aim of this project is to operate and control the unmanned railway gate in the proper manner in order to avoid the accidents in the unmanned railway crossing.
Water Level Controller using Microcontroller: Here we are designing the circuit which is used to detect and control the water level automatically in overhead tank using 8051 microcontroller. It is used in industries to control the liquid level automatically.
Solar Battery Charger: This is a simple circuit to charge 6V, 4.5Ah rechargeable Lead-acid battery from the solar panel. This solar charger has current and voltage regulation and also has over voltage cut off facilities. This circuit may also be used to charge any battery at constant voltage because output voltage is adjustable.
Car Battery Charger: This article aims to describe the principle of operation, design and working of a simple car battery charger from AC mains supply and a feedback control section to control the battery charging.
Battery Level Indicator: This article explains you how design battery level indicator. You can use this circuit to check car battery or inverter. So by using this circuit, we can increase the lifetime of battery.
FM Radio Circuit: FM Radio circuit is the simple circuit that can be tuned to the required frequency locally. This article describes the circuit of FM radio circuit. This is a pocket sized radio circuit.
Speed Control of DC Motor using Pulse Width Modulation: This pulse width modulation technique is the more efficient way to proceed to manage the speed of our DC motor manually.
Sun Tracking Solar Panel: This article describes about circuit that rotates solar panel. This Sun tracking solar panel consists of two LDRs, solar panel, stepper motor and ATMEGA8 Microcontroller.
Bidirectional Visitor Counter using 8051: This Bidrectional Visitor Counter Circuit is helpful to count the number of persons entering or leaving a room and to display it on a screen.
Biometric Attendance System: The main aim of this circuit is to take the attendance using biometric method and display when requested. This can be used in educational institutions, industries, etc.
LED Lamp using USB: This is a simple USB LED Light circuit which produces an output of 5v. It may be used as emergency light and also as a reading lamp.
Water Level Indicator: This Water Level Indicator project employs a simple mechanism which helps to detect and indicate the water level in an overhead tank or any other water container. It can be used in Hotels, Factories, Homes Apartments, Commercial Complexes, Drainage, etc.
Password Based Door Lock System: This system demonstrates a password based door lock system wherein once the correct code or password is entered, the door is opened and the concerned person is allowed access to the secured area. After some time, the door would be closed. Read this post completely to get more information.
Human Detector Robot using Microcontroller: The main principle of the circuit is to detect the human using human detection sensor. The wireless robot is operated manually using PC. The wireless technology used here is Radio Frequency technology. The data is transmitted to receiver through RF.
GSM Controlled Robot: GSM controlled robot or SMS controlled robot is a wireless robot which performs the necessary actions by receiving a set of instructions in the form a Short Message Service (SMS).
Temperature Controlled DC Motor using Microcontroller: The main principle of the circuit is to switch on the fan connected to DC motor when the temperature is greater than a threshold value.This can be used in home applications and in cpu to reduce heat.
Water Level Alarm Using 555 Timer: This is a simple and low cost hardware project using a 555 timer circuit. The aim of this project is to design a water level detecting alarm with simple and low cost hardware without compromising on the performance of the device.
5 Channel IR Remote Control System using Microcontroller: This article is aimed to design and demonstrate a simple 5 channel remote control system to drive five loads. This circuit works on the principle of IR communication.
Bipolar LED Driver Circuit: This bipolar LED driver circuit is very useful at the places where flashing of light is required, as in beacon flashing. This circuit can be mainly used for indication purposes.
Celsius Scale Thermometer using 8051 Microcontroller: This Celsius Scale Thermometer circuit is designed using at89c51 and lm35. This circuit works on analog to digital conversion principle. It can be used at homes, mobile places like cars to keep a track of the temperature.
Automatic Washroom Light Switch: This is a simple but very useful circuit in our real life which helps to automatically turn On the lights when a person enters the washroom and it automatically turns Off the lights when he leaves it.
Automatic Door Bell With Object Detection: This automatic doorbell with object detection circuit helps to sense the presence of a person or an object automatically and rings the doorbell.
Boolean Algebra Calculator: This Boolean algebra calculator is an interesting project which is more useful in our real life by working as a portable calculator to simplify the Boolean expression on the fly. In our circuit, we use Boolean algebra simplification methods like the Quine-McCluskey algorithm to simplify the Boolean expression and display the output on the display.
Auto Night Lamp using High Power LED: This Auto Night Lamp is an interesting circuit which helps to turn ON the LED lights interfaced to it at night time and it turns OFF the lights automatically when it is day.
Mobile Jammer Circuit: This circuit is used to block the signals of cell phones with in the range of 100 meters. This circuit can be used in TV transmission and also for remote controlled toys or play things.
Unbiased Digital Dice with LEDs: This is a circuit diagram of digital dice which is nearly unbiased. By using this circuit, there is no chance to cheat as the circuit operates at such a high speed that the circuit is almost imperceptible to the human eye.
Metal Detector Circuit: This is a simple metal detector circuit which is very useful for checking the person in shopping malls, hotels, cinema halls to ensure that person is not carrying any explosive metals or illegal things like guns, bombs etc.
Panic Alarm: This panic alarm circuit helps us to intimate others regarding our bad situation without any delay. It is more useful when an intruder entering our house or bad health status at which we are unable to intimate to the people around us.
Simple 100W Inverter Circuit: This is a small Inverter circuit which converts the direct current (DC) to alternating current (AC).
Car Parking Guard Circuit Using Infrared Sensor: This circuit helps the person in the driving seat in such a way that it gives an alarm if there is any obstacle or a wall while parking or while driving in reverse. It is very useful in our real life.
Fire Alarm with Siren Sound: This circuit alerts us when there is a fire accident at home by ringing a siren sound instead of a buzzer.
Intelligent Unambiguous Night Lamp Switcher: This is the circuit diagram of unambiguous night lamp switch, which turns ON our domestic lights automatically when it is dark, without human interference. It also avoids repeated frequent switching of the devices which is usually ignored in most similar circuits but may have a detrimental effect on our operating devices.
LED Flasher Circuit: LED Flasher is a simple circuit which will blink the LEDs in regular time period. This circuit can be used for decoration purpose or can be used for a signaling purpose and many more.
Dancing Bi-Color LED Lights Circuit: Generally we use small voltage bulbs in the dancing bulbs. This circuit is mainly used in the occasions, decoration articles or in visual indication sign boards etc. In this project, we use bi-color LEDs for sequential running light.
Thermistor Temperature Sensing Alarm: This circuit is a temperature sensing as well as alarm circuit. The circuit raises an alarm whenever the temperature crosses a certain limit.
Pull Pin Security Alarm System: This circuit helps us to get alerted when anybody picks our pockets or bags. The circuit is very helpful to prevent our goods getting pick pocketed.
Auto Turnoff Soldering Iron Circuit: This circuit helps the soldering iron to turn off automatically when it detects overheating and thereby avoids it from getting damaged.
Remote Operated Alarm Circuit: This circuit rings an alarm when you point a TV remote at it and press on any button. This can be used as a calling bell to call your assistant.
Battery Charger using SCR: Here is the circuit diagram of battery charger circuit using Silicon Controlled Rectifier. SCR can be used in half wave rectifier, full wave rectifier, inverter circuits, power control circuits, etc.
FM Bugger Circuit: Here is small circuit with which you can listen to another people conversation from long distance using the normal FM radio set. This FM bugger circuit is kept in room where you want listen the conversation. You can listen to this conversation using the normal FM radio set.
Cell Phone Detector: This is a simple circuit which helps to detect the presence of an activated cell phone by detecting the signals in the frequency range of 0.9 to 3GHz. It helps in mobile phones tracking which are used for spying.
Battery Powered Portable Light: This circuit is more helpful in handling unexpected and undesired darkness in our homes or offices. It provides considerable amount of brightness required to do our daily tasks.
IR Remote Control Switch: By using this circuit, we can control any house hold appliance with the help of remote. In this project, there are two parts Ã‚Â– one is in transmitting section and the other is in receiving section. Receiving section will be in a stable position which is connected to any load and transmitter will act as a normal remote.
Continuity Tester with Melody: This circuit works as a continuity tester device which tests the continuity of the wire at hand. It is an indispensable tool to check broken wires and undesired shorting of wires.
Rain Alarm Circuit: Rain water detector will detect the rain and make an alert; rain water detector is used in the irrigation field, home automation, communication, automobiles etc. Here is the simple and reliable circuit of rain water detector which can be constructed at low cost.
Automatic Plant Irrigation System: This project circuit is more useful in watering plants automatically without any human interference. It is more useful when the owner is not present in the home for few days.
Hot Water Geyser Controller Circuit: This circuit is made to turn OFF geysers as soon as our water gets hot and are ready for bathing.
Lead Acid Battery Charger Circuit: Lead Battery is a rechargeable battery and is more useful in our real life as it will dissipate very little energy, it has very low energy to weight ratio, it can deliver high current, can work for long time with high efficiency and is very low cost.
Motion Detector Circuit: The motion detector is not only used as intruder alarm but also used in many applications like home automation system, energy efficiency system, etc. The motion detector will detect the motion of the people or objects and give the appropriate output according to the circuit.
Touch ON and OFF Switch Circuit: This Touch ON/OFF Switch circuit is more useful in such a way that we can automatically ON or OFF any switch by touching a device without moving from our place.
USB Mobile Charger Circuit: This circuit is useful in charging the mobiles through USB outlet present in our laptops and PCs. For the charging of your mobile phone, this circuit provides you a regulated voltage of 4.7 volts.
Security Alarm Circuit: This circuit helps you to guard your precious documents as well as jewellery from intruders or theft. All you need is to just place this circuit in front of the locker or below the mat so when any unknown person come and walk over the switch, the circuit will trigger and sound of alarm comes.
Mosquito Repellent Circuit: Here is the simple electronic mosquito repellent circuit which can produce ultrasound in the frequency range of 20-38 kHz, which can scare away mosquitoes.
Simple FM Radio Jammer Circuit: This is a Jammer circuit which is used to block the signals. Jammer circuit produces the high frequency signal which will confuse the receiver of particular system from receiving the signal, even though circuit is working properly, user of the system feels that circuit is not working properly.
Automatic Street Light Controller Circuit Using Relays and LDR: This circuit helps in automatically turn ON/OFF the street lights using relays and LDR. The whole circuit is based on IC CA3140.
Battery Charger Circuit: This battery charger circuit works on the principle of controlling switching of an SCR based on charging and discharging of battery.
Interfacing 16×2 LCD with 8051: This is a simple circuit diagram which helps to describe interfacing of 16X2 LCD module to AT89C51which is a 8051 family microcontroller.
PWM LED Dimmer Using NE555: The Pulse Width Modulation (PWM) plays an important role in controlling the circuits. We use this PWM to dim the intensity of light of the LED.
Simple Fire Alarm Circuits: Here are two simple fire alarm circuits which are used to detect the fire automatically and inform to the people immediately with an alarm.
Wireless Switch Circuit using CD4027: This is a simple circuit which needs no physical contact with the appliance. In this circuit, all you need is to pass your hand above LDR to ON or OFF the switch.
Electronic Letter Box: This is a simple circuit which helps in finding out any letter dropped in our box by stopping the LED lights attached in this circuit.
Clap Switch Circuit for Devices: This is another simple but very useful circuit which helps to ON or OFF a device without moving from you place and also helps to control the speed of the electric devices like fan, etc.
12v DC to 220v AC Converter Circuit: Here is a simple voltage driven inverter circuit which converts 12v DC signal to single phase 220v AC using power transistors as switching device.
FM Transmitter Circuit: Here we built a wireless FM transmitter which uses RF communication to transmit the medium or low power FM signal. The maximum range of transmission is around 2 km.
100w Subwoofer Amplifier Circuit: Here is the circuit diagram and working of 100w subwoofer amplifier circuit. A Subwoofer is a loudspeaker which produces audio signals of low frequencies.
DTMF Based Home Automation System Circuit: This is a simple and very useful circuit in our real life named DTMF controlled home appliances system. It helps to control the home appliances using DTMF technology.
Street Lights that Glow on Detecting Vehicle Movement: This article describes about the circuit that switches the street lights on detecting vehicle movement and remains off after fixed time. This system controls the street lights using light dependent resistor and PIR sensor.
555 Timer IC Testing Circuit: This is a simple 555 IC testing-circuit which tests your entire 555 timer IC. So before using your IC, you may check whether your IC is good or bad by using this circuit.
Curtain Opener/Closer Circuit: This circuit will open and close the curtain of your home and office just by pushing a switch. So with the help of this unique circuit, we do not need to move from one place to open and close the curtain.
Variable Power Supply and Charger: This is a circuit which helps to check or test your electronic projects and also to charge the Mobile phone batteries. This circuit can also work as an emergency light.
LED Running Lights Circuit: This is a simple circuit consists of 9 LED lights in knight rider scanner mode. It will present an eye catching look as the LED initially travel in the one way and then travel reverse in the similar direction.
Luggage Security Alarm: This is a simple alarm circuit which helps in ringing a warning alarm when someone tries to steal the luggage.
9 Way Clap Switch Circuit: This circuit helps you to manage your appliances in your home by just clap without moving from your bed.
12V to 24V DC Converter Circuit: This is another kind of circuit which helps to convert 12V DC current to 24V DC current.
230V LED Driver: Here we design a simple circuit driving a series of LED from 230V AC. This is accomplished using a capacitor based power supply. This is a low cost and efficient circuit and can be used at homes.
3X3X3 LED Cube: This is a simple a simple LED cube circuit designed without using microcontroller. It is based on the principle of driving LEDs using the clock pulses.
Monostable Multivibrator Circuit Operation: Here is the monostable multivibrator circuit diagram and working. Multivibrator is an electronic circuit which will work as two stage amplifier operating in both stable and astable mode.
Mains Operated LED Light Circuit: This is a simple circuit which is more useful to save our resources, energy and money by installing in your homes.
LED Lamp Dimmer Circuit: In this circuit, at the starting LED glows slowly, then grown brighter and once again slowly it became dim. The basis of the whole circuit is an operational amplifier IC named LM358.
Variable Voltage Power Supply from Fixed Voltage Regulator: This Voltage regulator circuit is used to get fixed voltage at the output without depending on the input voltage.
LED Christmas Lights Circuit: This is a simple circuit used to decorate your house by building christmas lights using LEDs. The lights will get ON at night and OFF in morning time.
Audio Equalizer Circuit: The circuit is used to change the tune/melody into a different pitch level by devoid of loss in the tune. It is mainly useful to music lovers.
Air Flow Detector Circuit: This Air flow detector circuit can be used to detect the flow of air in areas like car engine. It can also be used as temperature detector.
150W Power Amplifier Circuit: Here we designed a power amplifier circuit using push pull class AB configuration to derive a power of 150W to drive a load of 8 Ohms (speaker).
7 Segment LED Display Decoder: This is the circuit diagram of display decoder which is used to convert a BCD or binary code into a 7 segment code used to operate a 7 segment LED display.
Digital Temperature Sensor: The main principle of this circuit is to display the digital temperature value. These are mainly used in environmental applications.
Digital Stopwatch Circuit: This is a simple circuit that displays count from 0 to 59, representing a 60 second time interval. It consists of a 555 timer to produce the clock pulses and two counter ICs to carry out the counting operation.
Toy Organ using 555 Timer IC: This is the circuit diagram of simple Toy Piano using 555 Timer IC. It produces different tones or sounds depending on the frequency range.
RFID based Attendance System: This simple RFID based attendance system is designed using ATmega8 Microcontroller and is mainly used in educational institutions, industries, etc. where authentication is needed.
Low Power Audio Amplifier using 555 Timer: This is a simple low power audio amplification circuit designed using 555 timer. It can be used to develop low power music systems used in vehicles.
Interfacing 16X2 LCD to AVR Microcontroller: This is a circuit which helps in interfacing 16X2 LCD with AVR Microcontroller. The Atmega16 belongs to the AVR microcontroller family.
Polarity cum Continuity Tester: With the help of this circuit, we can also identify whether the components we are using in our circuit are good or bad before mounting them on the PCB.
Reaction Timer Game Circuit: This is a simple and funny game circuit which contains 10 LEDs that are moving in an arbitrary fashion and we have to target a particular LED given by your challenger.
Police Siren Circuit using NE555 Timer: This circuit produces a sound similar to the police siren. You may also get detailed information about pin diagram and internal block diagram of NE555 timer.
100W MOSFET Power Amplifier Circuit: A power amplifier circuit using MOSFET has been designed to produce 100W output to drive a load of about 8 Ohms.
Digital Voltmeter Circuit using ICL7107: Here we designed a analog to digital converter working as a digital voltmeter using a low power three and half digit A/D converter ICL7107 having internal 7 segment decoders, display drivers, a reference and a clock.
8 Channel Quiz Buzzer Circuit using Microcontroller: We built the circuit using a microcontroller which scans the input from push buttons and displays the corresponding number on a display device.
2 Digit Up Down Counter: The main principle of this circuit is to increment the values on seven segment displays by pressing the button. This circuit can be mainly used in scoreboards.
Bike Turning Signal Circuit: The objective of this circuit is to indicate left or right turn for bike/vehicle. Two identical circuits are needed, one is for left and the other is for right. The main heart of this circuit is 555 timer.
Automatic Changeover Switch: This is a simple automatic changeover circuit in which DC load like a series of LEDs are driven either by a battery or an AC-DC power supply.
UP/DOWN Fading LED Lights: This is a simple up/down fading LED lights circuit which can be used in shopping malls, home and security applications.”/>
Police Lights using 555 Timer: This circuit simulates the police car lights by alternate flashing. This circuit flashes red LEDs for three times and blue LEDÂ’s for three times. This flashing action performs continuously. This circuit uses 555 timer and a decade counter.
PWM based DC Motor Speed Control using Microcontroller: Here is a simple DC Motor speed control circuit designed using AVR Microcontroller. Here we use a technique called PWM (pulse width modulation) to control the speed of DC motor.
Ding Dong Sound Generator Circuit: This is ding dong sound generator circuit is designed using 555 timer IC in astable mode. It can be used as doorbell. With some modifications, it can be used to produce different sounds. Read this post for complete details.
PIR Sensor Based Security Alarm: This article explains about PIR based security system in which PIR sensor is used instead of transmitter or receiver. This saves the power consumption and is low cost. This circuit can be used in the museums to protect the valuable things.
TV Remote Control Jammer: This proposed TV jammer circuit confuses the infrared receiver in a TV by producing the constant signal that interferes the remote control signal. If you switch on the circuit once, the TV will not receive any command from the remote. This allows you to watch your own program without anyone changing the channel or volume.
Super Sensitive Intruder Alarm: This circuit is designed to alert the user when an intruder enters into the home. If there is any obstacle in front of IR sensor, it generates an interrupt signal. This interrupt signal is given to the speaker to alert the user.
RF based Home Automation System: Here we have used RF434 MHz modules to make wireless remote. Using this remote, we can control the appliances within the range of 100 meters. It is used for remote control applications like burglar alarm, car door alarm, calling bell, security systems, etc.
High and Low Voltage Cutoff with Delay and Alarm: This high and low voltage cutoff with delay alarm circuit is an advanced automatic voltage stabilizer circuit and is used to protect our home appliances. It’s cost is less as compared to voltage stabilizers.
Dummy Alarm Circuit: The main principle of the circuit is to flash an LED for every 5 seconds. The circuit consists of 7555 timer IC as main component.
Reverse Parking Sensor Circuit: If you are a new driver then it is very difficult to judge the distance while parking the car. Reverse parking sensor circuit solves this problem by indicating the distance with the help of three LEDÂ’s. We can easily arrange this system at the back side of the car.
Automatic LED Emergency Light Circuit: This is the simple and cost effective automatic emergency light circuit with light sensing. This system charges from main supply and gets activated when main supply is turned OFF. This emergency lamp will work for more than 8 hours.
One Transistor Electronic Code Lock System: The main principle of this circuit is that the door lock opens only when the buttons are pressed in an order. The transistor and diode plays a main role in the circuit.
Automatic Battery Charger: This charger automatically shut off the charging process when battery attains full charge. This prevents the deep charge of the battery. If the battery voltage is below the 12V, then circuit automatically charges the battery.
Light Activated Switch Circuit: The main principle of this circuit is to switch ON the light when the LDR is illuminated. This circuit can be used in security applications like when there is darkness on the LDR, it stops lighting.
Remote Operated Spy Robot Circuit: This is a simple spy robot circuit which can be controlled by the remote. The maximum controllable range is 125 meters. It is used to observe the behavior of wild animals where human beings cannot reach.
Digital Voltmeter using 8051 Microcontroller: This is a simple digital voltmeter circuit designed using 8051 microcontroller. This circuit measures the input voltage from 0V to 5V. Here, the input voltage should be DC voltage to get the accurate output on LCD.
Ultrasonic Rangefinder using 8051: This circuit explains you how to measure the distance using 8051 microcontroller. This ultrasonic range finder system measures the distance up to 2.5 meters at accuracy of 1 cm.
Stepper Motor Interfacing with 8051 Microcontroller: The main principle of this circuit is to rotate the stepper motor step wise at a particular step angle. The ULN2003 IC is used to drive the stepper motor as the controller cannot provide current required by the motor.
Frequency Counter Circuit: Here we design a simple frequency counter system using two timers and two counters. While one of the Timer IC is used to produce clock signals, the other is used to produce the time limited signal of one second.
Delay using 8051 Timers
Interfacing 7 Segment Display to 8051: This article describes you how to interface seven segments to AT89C51 microcontroller. This system displays the digits from 0 to 9 continuously with a predefined delay.
LC Meter using 555 Timer: This is a simple LC Meter circuit designed using 555 Timer and 8051 microcontroller. It is mainly used to measure value of a reactive element like a capacitor or an inductor.
TV Transmitter Circuit: The main principle of this circuit is to transmit the audio and video signals. Here audio signals are frequency modulated and video signals are PAL modulated. These modulated signals are applied for the antenna.
DC Motor Interfacing with 8051 Microcontroller: Here is a simple but very useful circuit in our real life named interfacing DC motor with 8051 microcontroller. It describes you how to control the DC motor using AT89C51 controller.
Stun Gun Circuit: This Stun gun circuit is mostly used as a weapon to stun or send shock waves to the target with the intention to weaken or paralyze it.
Transistor Intercom Circuit: This transistor intercom circuit is a simple two way intercom circuit which is used for the dual purpose of sending as well as receiving signals.
LED Interfacing with 8051: The main principle of this circuit is to interface LEDs to the 8051 family micro controller. Commonly, used LEDs will have voltage drop of 1.7v and current of 10mA to glow at full intensity. This is applied through the output pin of the microcontroller.
Wailing Siren Circuit: The main principle of this circuit is to produce a wailing siren. The 555 timer IC is operated in astable mode. When the switch is pressed, speaker produces high pitch siren and when it is released, its pitch decreases and is switched off after 30 seconds.
Audio Tone Control Circuit: This article explains you how to design an audio tone control circuit with the gain of around 25. This design needs less number of components and it is cost effective.
FM Remote Encoder/Decoder Circuit: This is a simple post which shows you how to design FM remote encoder and decoder circuit using RF600E and RF600D ICs. This pair of encoder and decoder ICs establishes the communication with high level security. The operating voltage of these ICs is from 2V to 6.6V DC.
Wireless Mobile Battery Charger Circuit: This circuit mainly works on the principle of mutual inductance. This circuit may be used as wireless power transfer circuit, wireless mobile charger circuit, wireless battery charger circuit, etc.
Interfacing GPS with 8051 Microcontroller: In this interfacing of GPS with 8051 circuit, GPS module calculates the position by reading the signals that are transmitted by satellites.
How to Interface Real Time Clock with PIC18F: Get an idea about RTC, PIC Microcontroller pin diagram and how to interface RTC with PIC18F. RTC is an integrated circuit which keeps track of current time.
Random Number Generator using 8051: This circuit helps to generate a random number in between 0 to 100 when push button is pressed and it may be used in the games like monopoly, snake ladder.
Active Audio Crossover Circuit: Audio crossover is an electronic filter used in audio applications to send the appropriate signal to the speakers or drivers. This circuit is used in HiFi audio systems to separate the frequency bands from audio signal.
IR Audio Link Circuit: This simple IR audio link circuit is used to transmit audio signals wirelessly. This IR audio link is able transmit audio signals up to 4 meters.
Cellphone Controlled Home Appliances: This mobile controlled home automation system is designed without using microcontroller. We can also control a robot using this technology by making some modifications.
Variable Voltage Power Supply: This helps to design a variable power supply circuit which will provide 0 to 28V at 6 to 8 amps. It can be used in various power amplifiers and oscillators to provide DC supply.
Digital Clock using 8051: This circuit displays the time on LCD. For this clock, we can set the time at any instant. Here the clock works in 24 hour mode and the RTC chip is configured by programming 8051 controller.
GSM Interfacing with 8051: The main principle of this circuit is to interface a GSM modem with the microcontroller. The microcontroller used is AT89C51 microcontroller.
Multi Channel Audio Mixer Circuit: This audio mixing circuit has 2 MIC inputs and 2 line inputs. If you want to increase the input channels according to the application then add same circuit in parallel with the existing circuit.
Puff to OFF LED Circuit: The main principle of the circuit is to turn off the LED by a puff. The puff applied to the mic is converted into a voltage whose value is very small. This voltage is amplified and applied to the circuit in order to make the led turn off.
Light Activated Alarm Circuit: The main principle of this circuit is to produce sound depending on the light intensity falling on the circuit. As the light intensity falling on the circuit increases, it produces pulses with more duration and thus producing more sound. The main part of the circuit is 555 timer IC.
Electronic Eye Controlled Security System: This is a simple electronic eye controlled security system circuit designed using 7805 voltage regulator and LDR. It is used in security applications.
USB Sound Card Circuit: This USB sound card circuit is a device which allows an embedded system to create and record real and high quality sound. Read this post for more details.
Hi-Fi Dx Bass Circuit: This Hi-Fi Dx Bass Circuit describes the design, principle and operation of a two stage bass boosting circuit using simple high and low pass filters.
Wireless Electronic Notice Board using GSM: This wireless electronic notice board using GSM Technology and microcontroller circuit is used to display the data on LCD whatever we sent from the mobile.

BITS Warangal Innovative New Idea Project, ECE-3 Chart Presentation

2020-01-19T12:45:00.001+05:30

Innovative New Idea Project , Chart Presentation - ECE Department || Balaji Institute of Technology and Science Warangal,Telangana

Approximately each & every technology in modern living relies on electrical engineering in some or the other way. Electrical engineers labor with energy (together with light, electricity, sound, and electro-magnetic fields) and intellect (data, modeling, algorithms, simulation and control). Even though many of these occurrences are undetectable, they broaden the potential of surviving in modern world. With innovative projects and ideas dispensing almost every other day, it becomes necessary for electronics & electric students to position a practicable and within your means electronics projects for their submission which can be carried out by them simply.

1. Traffic Control System With Smart Ambulance and Capture Camera

2. Smart Dust Bin For Smart City

3. SHE 2.0

4. Automatic Billing Shopping Cart

5. Air Purifier Ideology

Innovative idea project, YouTube link

https://youtu.be/_8sRxYZJhf8

ECE mini and major project work

https://youtu.be/8biOjbC3H3I

EEE and ECE project

https://youtu.be/hg-wC_bH4LI

List of ECE Projects Ideas:

DTMF Controlled Robot: This simple DTMF based Cellphone controlled robotic vehicle circuit is designed without using microcontroller and is used in industries and surveillance systems.
Bluetooth Controlled Home Appliances: This circuit explains you how to control the electrical appliances using an Android device. Here, Bluetooth module is interfaced to 8051 microcontroller. This Bluetooth receives the commands from the Android application device using wireless communication.
Metal Detecting Robot: Here, we use a metal detection robot which works on RF technology. Land mines buried under the ground causes threat to the lives and affect the economy of the nation. Detection and removing of these mines manually is a dangerous task.
Password based Circuit Breaker: This password based circuit breaker project is built using 8051 controller and is used to switch off the power supply to the line by entering a password.
Auto Intensity Control of Street Lights: This is a simple circuit that automatically controls the intensity of street lights which is designed using microcontroller and LEDs.
Line Following Robotic Circuit using Microcontroller: This line follower robot is a basic robot that follows a specific path indicated by a line having some particular width.

Mini & Major Project Work for ECE Department Domain List

2020-01-19T11:02:00.001+05:30

Mini & Major Project Work and Innovative idea Project work for ECE Department Domain-Topic.

The fields for ECE engineering projects are listed below. You can choose any one of the technology on which you want to work on or you are interested in.

Embedded-Systems
GPS | GSM Projects
IOT-Internet of Things
VLSI Design
MATLAB Image Processing
Power system
Raspberry Pi
RF | Bluetooth | Zigbee | WiFi
Robotics | Mechatronics
Smart Card & Biometric Fingerprint
Solar Energy Based Projects

SELECT ABOVE DOMAIN AND COMMENT AND CHECK BELOW TOPICS AND ADDITIONAL INFORMATION

VLSI Project

High-Speed Low-Complexity Reed-Solomon Decoder: This project demonstrates the low complexity and high speed Reed-Solomon decoder using Pipelined Berlekamp-Massey Algorithm and its folded architecture with CMOS technology. This RS decoder is modeled and simulated in verilog HDL to verify its functionality.
FM Radio Receiver with Digital Demodulation: In this project, a simple demodulator circuit is designed using phase lock loop method on FPGA. This demodulating of FM signals is carried out using VHDL code.
Implementation of High-Speed Pipeline VLSI Architectures: The main objective of this project is to design high speed and efficient pipeline architectures for the computations of 2D and 1D discrete wavelet transform by minimizing number of clock cycles and operating frequency for performing DWT computations.
Design of Phase Frequency Detector and Charge Pump for High Frequency PLL: This project implements the new phase frequency detector and charge pump using cadence 0.18 micrometer CMOS process. This can be used for low power and high speed applications such as low jitter applications.
Design of Cache Memory with Cache Controller Using VHDL: The main aim of this project is to design FPGA based cache memory for detecting the cache miss and also to implement a cache controller for tracking the cache miss in cache memory. This design is performed by mixed style of modeling in VHDL.
An On Chip Design for Prepaid Electricity Billing System: The purpose of this circuit design is to implement an advanced and highly reliable prepaid electronic energy meter using VLSI technology. This VLSI design is implemented by ASIC design by modeling and simulating in this project.
High Speed Network Devices Using SRL16 Reconfigurable Content Addressable Memory (RCAM): In this project, SRL16 Content Addressable Memory (CAM) unit is designed by using VHDL and FPGA technique. Compared with the traditional CAM design methods, this design gives better results in terms of parallel and fast search capabilities.
IP-SRAM Architecture at Deep Submicron CMOS Technology : This project reduces the power dissipation in VLSI circuits by designing new SRAM architecture with IP-SRAM technique. This architecture is designed using 180nm technology.
Glitch free NAND based Digitally Controlled Delay Line for Spread Spectrum Clock Generator: The objective of this project is to avoid the glitch problem in conventional NAND based digital control delay lines (DLDL). This project deals with the implementation of glitch free NAND based DCDL on SSGC (Spread Spectrum Clock Generator).
Performance Analysis of Different Bit Carry Look Ahead Adder Using VHDL Environment : This project aims to design, simulate, test and implement different bit Carry Look Ahead (CLA) adder based on VHDL and to compare their results. In this 4, 8 and 16-bit CLA adders are implemented using VHDL and simulated using Modelsim software.
High speed VLSI implementation of 256-bit Parallel Prefix Adders: This project present the new approach for the redesign of parallel prefix adders with 128 width operands of different parallel adders on Xilink Sprtan FPGA. This VLSI based design gives better performance than that of conventional adders.
FPGA Implementation of Mutual Authentication Protocol using Modular Arithmetic: This project aims to design hardware efficient protocol for RFID system by implementing tag-reader mutual authentication scheme which is more secure for external attacks and also consumes less logic elements. This is designed by VHDL and simulated in Xilink simulator.
Design of Data Link Layer using Wi-Fi MAC Protocols: The main aim of this project is to design the MAC layer of IEEE 802.11 standard which is mainly used for Wi-Fi communication products. This Wi-Fi transmitter is designed and simulated using VHDL and simulator respectively.
Implementation of Overlap based Logic cell and Its Power Analysis: This project improves the static power consumption in CMOS technology by clock overlap-based logic. This project implements a new architecture of dynamic/static edge triggered flip-flops with the overlap logic.
Low Power 3-2 and 4-2 Adder Compressors Implemented Using ASTRAN: This project demonstrates the two adder compressor architectures which are used to implement multipliers and FFTs. This project deals with the combined implementation of these two adders at logic, electrical and physical levels.
FPGA Implementation of UTMI and Protocol Layer for USB 2.0: This projects implements the USB 2.0 Macrocell Transceiver Interface (UTMI) and protocol layer of USB core on FPGA by using VHDL code and Xilink software. This design can perform error detection, data encoding and decoding operations in an efficient way.
Review of 5 stage Pipelined Architecture of 8-Bit Pico Processor: This project demonstrates the increased performance of 8-bit Pico processor by implementing pipelining technique. This 8-bit Pico processor is used for small embedded applications and also used for educational purpose.
Design of On-Chip Bus OCP Protocol with Bus Functionalities: This project implements the Open Core Protocol (OCP) using VHDL for providing the lossless communication. This design provides bus functionalities like burst transactions, simple transactions, out-of-order transactions and pipelined transactions.
FPGA Implementation of Controller Design for Remote Sensing Systems: In this project, a controller is designed for remote monitoring and remote sensing system that can be communicated through GSM network. This design is performed by VHDL and implemented on FPGA hardware.
Test Pattern Generation Using BIST Schemes: This project generates the different test patterns using Built-In Set-Test schemes by a class of MISC (Multiple Single Input Change) sequences. This design is carried by VHDL and test patterns are simulated in Modelsim.
A Design Technique for Faster Dadda Multiplier: The main aim of this project is to achieve the faster multiplication by combining two design techniques; partitioning of the partial products and adding them using hybrid adder. Based on this design, 8, 16, 32 and 64-bit Dadda multipliers are implemented.
An Efficient Retouched Bloom Filter Based Word-Matching Stage Of BLASTN: This project implements the new algorithm for Retouched Boom Filter for genomic sequence database scanning based on FPGA architecture. This architecture accelerates the word matching stage of BLASTN which is a bio-sequence search tool.
VLSI Implementation of Single Cycle Access Structure for Logic Test in FPGA Technology: This project implements an FPGA based new test structure for single cycle access test by proposing priority encoder in the structure to speed up the execution process. This design is developed using VHDL code, simulated in Modelsim and synthesized in Xilink software.
Design of accumulator Based 3-Weight Pattern Generation using LP-LSFR: This project aims to generate weighted patters without changing the structure of adder by Ex-Oring counter and gray code generator with seed generated by the low power linear feedback shift register (LP-LSFR).

Dsp Based Projects on,

ADSP2105 Based development system

Voice compression using ADSP2105

3D image generation using ADSP2105

Digital Filter implementation

Digital Function Generator with PC interface

Digital Control system for level process

PC based ECG monitoring system

PC to PC Wireless Communication

Controlling of home appliance using PC printer port

Displacement Measurement using LVDT

Embedded System Design

PC programmable Industrial PLC System usingAT89C51Microcontroller

Digital PID Controller using AT89C52 Microcontroller

Temperature scanner and data logger using Microcontroller

Datalogger with voice & tiny motor control

Programmer for ATMEL Microcontrollers with PC Serial Interface

Development system for 51 family Microcontroller

Electronic Screw gauge using LVDT

Automatic water level controller

Temperature measurement and control using PID algorith

Temperature measurement and ON/OFF control with voice enunciation

Speed measurement and control of Universal motor (PID algorithm)

Digital weighing machine

Efficiency Detector for Relay and Circuit breaker
P
IR Remote control for electrical home appliances

PC to Printer (RF) Wireless Communication

Intelligent Fire Fighting system

Interactive Voice Response system

Burglar Alarm with telephone Line Interface

Remote controlling of home appliance thru telephone line

Wireless data Modem (PC to Microcontroller Interface)

Wireless Automated Guided Vehicle

RF access system

Micro controller based Frequency meter

Micro controller based Object counter

Wireless Datalogger

Wireless (RF) PID control system for Temperature Process

Wireless (RF) PID control system for speed control of motor

1. Embedded Systems

Embedded systems is a field where software meets hardware. The importance of embedded systems is constantly increasing as we put miniature computers into all sorts of systems (Signboards, Authentication systems, Pacemaker, Wearables). Almost all devices which we use in our day-to-day life involve electronics and micro-controller and that is how important embedded systems have become. With embedded system the possibilities of innovation are endless.

Embedded system would easily be the effective platform to understand the working of microcontrollers and their programming. Some of the projects that you do on embedded system for your electronics engineering (ECE) projects are:

2. Robotics Projects

Robotics is one of the upcoming technology which simplifies the mechanical work and therby increases the efficiency of operation through very less or no human interaction. 8051 micro-controller and Arduino are widely used to make the robots brain which sends out signals and information to the robot and control its action in the process.

Only when you understand micro-controller technology from core, you will be able to develop robots that do a specific set of actions. Without this core, you cannot develop any innovative robots. So building robotics projects with this technology will help you to understand it from basics. Some of the robotics projects that you can develop using 8051 micro-controller are:

3. Internet of Things (IOT)

IOT devices are connected to cloud with a designated IP address and transfer data to any remotely connected device. These devices are represented digitally and can be controlled from anywhere. Whenever it comes to smart home, smart city, wearables or anything that is related to smart, it is an application of IOT.

As it remotely stores data and sends it to the user, its applications are vast and are now widely implemented in industries. As it is becoming one of the trending concepts, you need to understand the technology behind this and should equip yourself to meet the industrial requirement. Some of the final year electronics projects that you can do in IOT are:

Automatic Street Lighting system using IoT
Smart Building Project using PIR
Smart Water Monitoring System using IoT
IoT using Raspberry Pi for weather monitoring
Weather Monitoring System using IoT
Smart Irrigation System using IoT
IoT Vehicle Simulation System
Automatic Smart Parking System using IoT
IoT based Home Automation
IoT based Biometrics
Motion Controlled Servos using IoT

4. Mechatronics Projects

Mechatronics is a booming field and has a very good future.. This technology is currently applied in everyday life for solutions ranging from transportation systems to automation systems and manufacturing systems. Mechatronics are widely used for their efficient and reliable solutions where mechanical work is to be done repeatedly and with great accuracy. A few examples include robots, smart home appliances, automated guided vehicles, human gesture controlled devices, manufacturing robots etc,.

As mechatronics technology is an integration of computer science, mechanical and electronics engineering, it provides an excellent platform for the engineers to develop multi-disciplinary projects and skills. Some of the mechatronics projects that you can do are:

5. Wearable Technologies

Ever wondered that our mobile phones, in future may turn into ear pods or glasses that you can wear and connect to anyone across the globe or your sound system would turn into a wrist band which you can wear and listen to your favorite songs on the go? Such changes are becoming a reality and these changes are happening very fast due to the recent advancement of technology. Nerds around the globe are working on wearable technologies as they are going to dominate this in consumer products.. And these wearables allow users to use the technology on the go without interfering with their normal tasks.

Whether it is Military, Education, Sports, and Medical or Fashion the applications of wearables is endless. So the fields that you can choose and develop projects are endless using this technology. Some of the electronics projects that you can develop on wearable technologies are:

Wearable video display
Wearable health monitoring glove
Smart watch using Raspberry Pi
Smart bike display
Smart jacket for bikers
Wearable wrist band with pulse sensor

All the best.

First Select Domain and Comment Below Related List Of project Topics and Links will Send You ,

Thanks For Following, please like and share with your friends,

Subscribe CornerLearner Youtube Channel

Keep Following Additional Details and More information

Innovative new idea project Chart presentation:

https://youtu.be/_8sRxYZJhf8

ECE and EEE project work mini and major:

https://youtu.be/hg-wC_bH4LI

Mini and Major Project work:

https://youtu.be/8biOjbC3H3I

CornerLearner:
https://www.youtube.com/channel/UCRo3yjBdl-_ip9cP5r4rDfg

DRDO-CEPTAM Multi Tasking Staff Online Form 2020

2020-01-19T10:56:00.000+05:30

Name of the Post: DRDO-CEPTAM Multi Tasking Staff Online Form 2020

Post Date: 13-12-2019

Latest Update: 23-12-2019

Total Vacancy: 1817

Job Details: Defence Research & Development Organization (DRDO)-Centre For Personnel Talent Management (CEPTAM) has announced notification for the recruitment of Multi Tasking Staff (MTS) Vacancies. Those candidates who are interested in the vacancy details & completed all eligibility criteria can read the Notification & Apply Online.

Application Fee Details:

Application fee: Rs. 100/-

For All Women/ SC/ ST/ PWB/ ESM: Nil

Payment Mode: Online Through Credit Card/ Debit Card/ Net Banking

Importance Dates:

Starting Date to Apply Online: 23-12-2019 (TIME: 1000 HRS)

Last Date to Apply Online: 23-01-2020 (TIME: 1700 HRS)

Date of Tier I Exam (CBT): To be Notified Later

Age Limite:

Age Limit: 18 – 25 Years

Age relaxation is applicable as per rules.

Qualification:
Candidates should possess 10th Class/ ITI Pass.

Online apply: http://detceptam.com/drdoceptam/
Notification: http://detceptam.com/drdoceptam/uploads/loadpdf.php?file=k7m5p+fQk8y6vtrWxtnZy9aV2sm0cN7Yk6ed13A=&t=xa3HrKHRyM4=#toolbar=0&navpanes=0

NPCIL Nuclear Power Corporation of India Limited 2020

2020-01-19T10:43:00.002+05:30

Nuclear Power Corporation of India Limited

Name of the Post: NPCIL Online Form 2020

Post Date: 16-01-2020
Starting Date: 15-01-2020

Latest Update: 31-01-2020

Total Vacancy: 102
Salary : 35400/

About Job:

Nuclear Power Corporation of India Limited Scientific Assistant, Technician – 102 Posts. a premier Public Sector Enterprise under Department of Atomic Energy, Government of India having comprehensive capability in all facets of Nuclear Technology namely, Site Selection, Design, Construction, Commissioning, Operation, Maintenance, Renovation, Modernization &Upgradation, Plant life Extension, Waste Management and Decommissioning of Nuclear Reactors in India under one roof, invites applications for its unit “Gorakhpur Haryana Anu Vidyut Pariyojana” for the following posts to share these challenging spectrum of responsibilities:
Those Candidates who are Interested to the following vacancy and completed all Eligibility Criteria can read the notification & apply online.

Online Apply Link:

www.npcilcareers.co.in

Notification :https://npcilcareers.co.in/GHAVP2020/documents/advt.pdf

Official Website : www.npcil

You Tube :https://www.youtube.com/channel/UCRo3yjBdl-_ip9cP5r4rDfg/videos

UPSC NDA & NA Job Notification

2020-01-19T10:28:00.000+05:30

UPSC NDA & NA (I) Recruitment 2020 – Apply Online for 418 Vacancy

Name of the Post: UPSC NDA & NA (I) Online Form 2020

Post Date: 08-01-2020

Latest Update: 10-01-2020

Total Vacancy: 418

About Job: Union Public Service Commission (UPSC) has announced notification for the recruitment of National Defence Academy & Naval Academy Examination (I), 2020 (Indian Naval Academy Course (INAC)). Those Candidates who are Interested to the following vacancy and completed all Eligibility Criteria can read the notification & apply online.

Application Fee Details:

For General: Rs. 100/-

For SC/ST candidates/Sons of JCOs/NCOs/ORs: Nil

Payment Mode: Online/ Offline