Dredge-Dredges-Dredging Equipment

Pipe Flange Gaskets

noreply@blogger.com (Anonymous) — Fri, 04 Jan 2013 21:06:00 +0000

Pipe flange gaskets are used to connect pipes, pumps, valves and other types of equipment. The flanges are typically screwed or welded on, which is then connected with bolts.

These Full Faced Gaskets are available from 4" to 20"

Pipe Flange Gasket Benefits

Prevent and reduce leakage
Excellent low cost durable material

Styrene Butadiene Rubber

Full-Faced Gaskets

Sizes range from 4"- 20"
3/8" thick
125Ib./150Ib ANSI

Styrene-Butadiene Rubber Advantages

Synthetic rubber

Styrene
Butadiene

Increased advantages

Abrasion
Crack
Aging
Dielectric Strength
Water Absorption

Pipe Flange Gasket

Custom Dredge Works, Inc.
1105 NW Lower Silver Lake Road
Topeka, Kansas, 66608
Phone: 1-785-232-1582
Fax: 1-785-232-3914
Email: info@customdredgeworks.com

Website: http://www.customdredgeworks.com
Ebay Store: http://www.stores.ebay.com/customdredgeworks

Dredges and Dredgers

noreply@blogger.com (Anonymous) — Thu, 27 Dec 2012 21:31:00 +0000

A dredge or dredger is essentially the same type of equipment which is called differently depending on the person and location. Dredges are commonly called dredges in the Americas, whereas the word dredgers are most commonly used worldwide. These types of machines can be used for a variety of mining applications and dredging projects. There are a few types of hydraulic dredges that are manufactured and customized to aid in specialized dredging projects such as the Auger dredge, Cutterhead dredger, Plain-Suction dredge, Hopper dredger, Chain Ladder dredge, and Ladder pump dredger. Each of these types of hydraulic dredges is unique and has its advantages and disadvantages when it comes to dredging projects, because of different variables that could potentially hinder the dredging project.

Dredges for dredging projects

For example, the location of the area where the dredging project is taking place. The dredge may not be feasible to dredge in the location because of its size. The dredger may not have the correct dredge parts equipped on the dredger to dredge the different types of materials or sediment. All of these brief factors are key components that could hinder the effectiveness and productivity of the dredger while also hindering the success of the dredging project and/or mining application, if a detailed dredge plan has not been correctly developed and implemented.

Dredgers can be used for a multitude of dredging projects including some of the following: Environmental remediation, land reclamation, marina construction, mining, beach restoration, irrigation, channel and canal maintenance, and dredging for sand and gravel, and for other types of materials such as gold and other precious metals.

Dredge used for dredging project

Custom Dredge Works provides all of these types of dredgers, and different types of dredging equipment that can help improve the environment from natural disasters such as bad storms and hurricanes, which typically damages the environment. Using hydraulic dredges can assist in repairing the environment before and after a natural disaster strikes.

Dredger for mining application

Hydraulic Dredges For Mining and Dredging Projects

noreply@blogger.com (Anonymous) — Tue, 18 Dec 2012 21:27:00 +0000

Custom Dredge Works, Inc. is a professional hydraulic dredge manufacturer located in Topeka, Kansas. Custom Dredge Works, Inc supplies their clients with hydraulic dredgers, dredge parts, and dredge equipment to aid them in different types of hydraulic dredging projects. Listed below are the types of hydraulic dredges that the company designs and manufacturers for dredging projects around the world.

Types of Hydraulic Dredges

Hopper Dredgers
Auger Dredgers
Straight Suction Dredger
Cutter Head Dredger
Chain Ladder Dredger
Ladder Pump Dredger

Description of Dredges

Hopper Dredgers:

Hopper Dredgers are dredge ships that have hoppers located on the dredge. These hopper dredgers are fitted with dredge pumps that dredge suction from the channel, which becomes transported through the pipeline on the dredge. Once the material becomes transported, the dredged material is then stored in the hoppers on the dredger. When the hoppers are filled the dredged material becomes discharged through the pipeline on the dredger to the contamination area or the disposal site. These type of dredges are commonly used to dredge heavy materials such as sand and gravel, but can be used to dredge other types of heavy materials. Hopper dredgers are used in large spaces such as high traffic sea areas, or the ocean, but they are not commonly used in smaller confined or shallow areas.

Auger Dredger:

Auger dredgers are similar to cutter head dredgers, but the auger dredgers are smaller in size. The auger dredger has a similar cutting tool used for dredging but it is set differently on the dredge. Auger dredgers are commonly used for environmental mining or for other types of dredging projects. This type of dredge has the ability to pump materials faster than using the larger cutter head dredger. Auger dredgers are commonly used to dredge softer materials such as slurry, sludge or slit, but can be used for other types of dredged materials such as sand. Even though, the auger dredge has the ability to dredge sand it may not be as effective or efficient as using a cutter head dredger, but the auger dredge can be more productive and efficient than using a cutter head dredge since auger dredgers have the ability to create less turbidly than using a cutter head dredge.

Straight Suction Dredge:

Straight Suction Dredge is also called a Plain Suction Dredge. This type of dredge uses the suction of the dredge pump to get the material into the pipeline of the dredger. Straight Suction Dredgers are equipped with water jet spray nozzles to assist in the cutting the materials.

Cutter Head Dredge:

Cutter Head Dredger is a type of dredge that uses a rotating cutter sometimes called a crown or a basket. The cutter head part of the dredger helps move the material from one location to another area of the suction mouth. This part of the dredge allows the material to become suspended which is then traveled into the pipeline. A cutter head dredge is unique since it typically has a variety of cutter heads than can be attached on the dredge. For example, a cutter head dredge can have a serrated cutter head, a pick tooth cutter head, or a plain cutter head attached on the dredger.

Chain Ladder Dredge:

Chain Ladder Dredger is a type of dredger that uses a chain to loosen the material. The chain ladder dredge is used when material becomes suspended. After the material becomes suspend the material is then pumped while conveying over sized materials, which may hinder production away from the suction. The chain ladder dredge has the ability to effectively loosen materials making it easier for suction, while using minimal usage and power. This type of dredger has the ability to permit production in deposits that cannot be mined using a rotating cutter unlike the cutter head dredger.

Ladder Pump Dredger:

Ladderpump dredge can be used for different types of mining applications or dredging projects. The dredge pump is located on ladder of the dredge which can be used or operational underwater. With the dredge pump being located on the ladder, there is a significant advantage of reduced suction lost with the positive head on the dredge pump inlet. This advantage increases the ability of a higher percentage of solids being pumped, therefore increasing the effectiveness of the vacuum suction capabilities. This advantage has the possibility of being cost effective, since the production has increased as a result reducing the cost for pumping.

Contact Information

Custom Dredge Works, Inc.

1105 NW Lower Silver Lake Road

Topeka, Kansas, 66608

Phone:1-785-232-1582

Fax: 1-785-232-3914

Email: info@customdredgeworks.com

Website http://www.customdredgworks.com

Facebook: http://www.facebook.com/customdredgeworks

Twitter: http://www.twitter.com/cdw_usa

Holiday Pump Packing Deals

noreply@blogger.com (Anonymous) — Wed, 12 Dec 2012 17:12:00 +0000

Special Holiday Pump Packing Deals

"Its Time To Repack"

High Quality pump packing
Available for all type of pumps
Pump packing made in the USA
Special Low price of $75.00 per roll
We have 1" and 3/4" pump packing in-stock
Special offer free shipping with 4 or more rolls

3/4" Pump Packing

1" Pump Packing

"Come dredge with Custom Dredge, your hydraulic dredge manufacturer, we have dredges, dredge parts, dredge equipment; all dredge solutions for dredge needs"

Contact us today for this special holiday season deal

Custom Dredge Works, Inc.
1105 NW Lower Silver Lake Road
Topeka, Kansas, 66608

Phone: 1-785-232-1582
Fax: 1-785-232-3914
Email: info@customdredgeworks.com

Visit our website at www.customdredgeworks.com
Like us on Facebook at https://www.facebook.com/customdredgeworks
Follow us on Twitter at http://www.twitter.com/cdw_usa

Diamond Back Hydraulic Dredger

noreply@blogger.com (Anonymous) — Thu, 06 Dec 2012 20:28:00 +0000

10" hydraulic dredger for sale from Custom Dredge Works, Inc.

DiamondBack Dredger Image From Custom Dredge Works,Inc.

Image of the Diamond Back Dredger Front Cab View

Diamond Back Dredger From Custom Dredge Works, Inc. side view

Visit our website at http://www.customdredgeworks.com for more information

Or check out our facebook page at facebook.com/customdredgeworks for more images of our products and services

For more information view this new listing on our new dredger page

http://www.customdredgeworks.com/new/diamondbackdredger.html

Used Dredging and Dewatering Equipment For Sale

noreply@blogger.com (Anonymous) — Wed, 05 Dec 2012 20:42:00 +0000

44" Fine Material Washer Immediately For Sale

$25,000 + Ni Hard/Urethane Shoes + FOB Topeka

44" Diameter x 32" Long Spiral Sand Screw

Single Screw

Types of Applications

Gravel
Environmental
Mud
Mixed Debris
Mixed Clay Materials
Crushed Stones

Remove Material From the Following:

Municipal Waste
Salt Reclamation
Sand Manufacturing
Fines Recovery
Concrete Reclamation

Miscellaneous

Urethane Outer Wear Shoes

Ni-Hard Outer Wear Shoes

dewatering equipment- fine material washer

sand screw

fine material screw washer

Contact Information

Custom DredgeWorks, Inc
1105 NW Lower Silver Lake Road
Topeka, Kansas, 66608
Phone: 1-785-232-1582
Fax: 1-785-232-3914
Email: info@customdredgeworks.com

Website: http://www.customdredgeworks.com/used_dredges/index.html
Follow us on Twitter @ www.twitter.com/cdw_usa
Facebook @ www.facebook.com/customdredgeworks

"Come Dredge with Custom Dredge your hydraulic dredge manufacturer providing our customers with dredges, dredger parts, and dredging equipment all dredge solutions for dredge needs"

Dredger- Cutter Head Dredger- Custom Dredge Works

noreply@blogger.com (Anonymous) — Fri, 30 Nov 2012 20:32:00 +0000

Cutter Head Dredger from Custom Dredge Works, Inc.

At Custom Dredge Works, Inc., we have different types of hydraulic dredgers for any type of dredging project. Here is a video of our Cutter Head Dredger during a dredging project.

"Custom Dredge Works your hydraulic dredge manufacturer providing dredger solutions for dredger needs"

Custom Dredge Works- BlogSpot: Blue Shell

noreply@blogger.com (Anonymous) — Fri, 30 Nov 2012 19:51:00 +0000

Custom Dredge Works- BlogSpot: Blue Shell: Too Funny!!! " Custom Dredge Works your hydraulic dredge manufacturer , providing dredger solutions for our clients dredger needs"

Blue Shell

noreply@blogger.com (Anonymous) — Fri, 30 Nov 2012 19:47:00 +0000

Too Funny!!!

"Custom Dredge Works your hydraulic dredge manufacturer, providing dredger solutions for our clients dredger needs"

New RIGZONE Listing

noreply@blogger.com (Anonymous) — Mon, 26 Nov 2012 20:46:00 +0000

New website listing on RIGZONE, check out our Facebook and the Custom Dredge Works Website for the latest news and updates about our products and services

" At Custom Dredge, we have dredgers, dredger parts, dredger equipment, all dredger solutions for all of our customers' dredger needs"

Happy Thanksgiving

noreply@blogger.com (Anonymous) — Wed, 21 Nov 2012 22:05:00 +0000

" Don't dredge your food too much this weekend"

From Custom Dredge Works, your hydraulic dredge manufacturer located in our capital city of Topeka, Kansas

Happy Thanksgiving from Custom Dredge Works, Inc.

noreply@blogger.com (Anonymous) — Tue, 20 Nov 2012 20:51:00 +0000

Custom Dredge Works Reblog

www.customdredgeworks.com
www.facebook.com/customdredgeworks
www.customdredgeworks.wordpress.com

Gorgeous Booster Pump For Dredge 11-17-12

noreply@blogger.com (Anonymous) — Sat, 17 Nov 2012 17:32:00 +0000

"Come Dredge with Custom Dredge, your hydraulic dredge manufacturer located in Topeka, Kansas"

12 X 12 X 40 Booster Pump for a hydraulic Dredge

Engine Model C18
Max 800 Meters
ALT 2625 FT
700 HP
522.0 KW

Visit our website CustomDredgeWorks for other types of booster pumps, types, sizes, specs!!!
Call @ 1-785-232-1582 or email at info@customdredgeworks.com
Check out our new Facebook Page at www.facebook.com/customdredgeworks

An awesome booster pump for a hydraulic dredge!!!!

Custom Dredge Works-Booster Pump For Dredge

Booster Pump For Dredge

Booster Pump Image for Dredge

Booster Pump For Dredge-Custom Dredge Works

Front View Booster Pump For A Dredge -Custom Dredge Works

Dredge Equipment For A Dredge -Custom Dredge Works

Dredge Part of booster pump- Custom Dredge Works

New Facebook Page

noreply@blogger.com (Anonymous) — Fri, 16 Nov 2012 15:54:00 +0000

Check out our new Facebook Page

Custom Dredge Works on Facebook

See images of some of our hydraulic dredgers @ FB and @ our website

Dredge Custom Dredgers

noreply@blogger.com (Anonymous) — Fri, 09 Nov 2012 18:50:00 +0000

Do you need a new dredge or a used dredge? Do you need a dredge part or some type of dredge equipment?

Well look no further!!!

At Custom Dredge Works, Inc. we have the solution for all of your dredging needs.

Custom Dredge Works Inc. is a professional hydraulic dredge manufacturer that provides services throughout the United States and internationally. We specialize in hydraulic dredging equipment, designing, manufacturing, and customizing each dredge, dredge part, and dredge equipment for each of our customers' individual dredging needs.

Our hydraulic dredging engineers can work with you to design a custom dredge for any type of dredging project.

At Custom Dredge Works our dredging and steel fabrication team, has a full service of custom fabricating structural steel and sheet metal components and parts. Our fabrication facility can aid in any type of commercial, industrial, or architectural project. Another benefit of using Custom Dredge Works is that we have our own Dredge Transport Service making it easy to ship a variety of products and services nationally and worldwide to our customers.

Our massive inventory consists of all types and sizes of hydraulic dredgers, booster pumps, and dredge equipment that are available immediately. We also carry other types of products such as fuel pumps, conveyor belts, water pumps, gaskets and more. If you have a question about a particular product or service , please don't hesitate to contact us at 1-785-232-1582 or send us an email at info@customdredgeworks.com, our experienced dredge sales team will be able to provide you with more detailed information regarding your specific dredge or dredge related equipment need.

SUPER DUTY LONG LASTING PIPE FLANGE GASKET - 18 inch

noreply@blogger.com (Anonymous) — Fri, 02 Nov 2012 15:53:00 +0000

At Custom Dredge Works, we have full 3/8" pipe flange gaskets for sale.

These flange gaskets are made from a quality, durable called (Styrene Butadiene Rubber). We have sizes ranging from 4 to 18 inches and we can provide other sizes upon request.

Visit our website at customdredgeworks.com for more information or call us at 1-785-232-1582

We also have a variety of other types of products listed here at our eBay store.

New Para-Flex Coupling

noreply@blogger.com (Anonymous) — Mon, 29 Oct 2012 14:21:00 +0000

We have a new Para- Flex Coupling For Sale.

Para-Flex Coupling employ a molded, non-lubricated elastometric flexing member loaded in shear.

Here are some specifications of the item.

Coupling Style: External Tire- Para-Flex
Item Type: Flange Assembly
Outside Diameter: 24-3/4"
Bore Type: Taper Lock Bushing
Bore Size: N/A
Material: Ductile Iron
Bushing Series: 7060
Additional Details: H-Hub Side Installed
Coupling Series: PX280

Check out this item for sale at our eBay store Para Flex Coupling

Visit our website at customdredgeworks.com for more industrial products and services for all of your industrial needs. We also have Hydraulic Dredges, and Booster Pumps, for sale!!!

New Conveyor Belt Trough Idler

noreply@blogger.com (Anonymous) — Fri, 26 Oct 2012 21:12:00 +0000

At Custom Dredge Works, we have 3 new conveyor belt trough idlers for sale now immediately on our eBay store.

We also have hydraulic dredging equipment at our website come visit us at www.customdredgeworks.com

Water Pump For Sale

noreply@blogger.com (Anonymous) — Thu, 25 Oct 2012 15:23:00 +0000

Berkeley B3JRMBM 3X4X13 Water Pump for sale!!!!

Visit our website Custom Dredge Works and our eBay store for more details
Ebay Store

New and Used Dredges: New 14 inch Dredge for Immediate Sale, visit our w...

noreply@blogger.com (Anonymous) — Wed, 24 Oct 2012 21:25:00 +0000

New and Used Dredges: New 14 inch Dredge for Immediate Sale

Visit our website at www.customdredgeworks.com

We have a brand new cutter-head dredge available with a 55 foot Ladder and a 16 X 14 X 40 In Hull Mount Pump.

Cutter Head Dredge available for Sale in Topeka, Kansas

noreply@blogger.com (Anonymous) — Wed, 24 Oct 2012 20:54:00 +0000

New 14 inch Dredge for Immediate Sale, visit our website at www.customdredgeworks.com/new/new_dredge2.html

We have a brand new cutter head dredge for sale. This dredge has a 55 foot ladder and a 16 X 14 X 40 Inch Hull Mount Pump.