Step 1 – Gather Your Supplies

Gather your supplies and choose your papers/cardstock. Today I am using dies from Spellbinders Paper Arts (Rainboot Bouquet), but you can choose any similar dies in your stash. Many companies offer something similar to the ones I am using. If you save your paper scraps, this is the perfect opportunity to use those, and determine your colors from the scraps you have. The cardstock I am using today:

Classic Crest Solar White
Pop-Tone A6 Folded Discount Card Stock Blank DIY Cards
Basis 8.5×11 Light Yellow
Astrobrights Gamma Green
Poptone Blue Raspberry
DCS Discount Card Stock: Smooth 4×6 inch Pewter Grey (not shown)
I had also pulled some Pop Tone Pink Lemonade CS for the flowers, but ended up just using the Cotton Candy and ink.

Step 2 – Card Bases and Die Cutting

My card base is 4.25×11″ from the Classic Crest, scored in half and folded. The mat base is also from the same cardstock, cut 4×5.25″ and embossed with a Pinkfresh Studio coverplate. All of the flowers and foliage were cut at the same time on my large electronic die cutting machine.

Step 3 – Shading and Assembling the Die Cuts

I like to use liquid glue, adhesive tape, and foam tape to assemble my designs. I used a couple of Pinkfresh Studio dye inks to give some dimension to the flowers/foliage and change the color of the pink. For a little extra bling, I added some crystal gems on the flower centers and to the card base.

The sentiment is from Playful Petals Dies (PinkfreshStudio) and stamped in VersaClair Nocturne ink.
This floral spring thank you card is perfect for sending a little garden in an envelope across the miles to brighten someone’s day!

Be sure to visit CutCardStock on Facebook, Instagram and Pinterest for more DT inspiration! Also join our Creating with CutCardStock Facebook Group for even more crafty inspiration! Thanks so much for stopping by today – we’ll see you next time!

The post Floral Spring Thank You Card appeared first on CutCardStock Blog.

Hi everyone! It’s Jessica here. Father’s Day is right around the corner. Do you have a card design in mind? I tend to struggle with masculine cards, so I decided to keep it simple this year with a geometric patterned background. Let’s take a look at this Father’s Day card with geometric pattern background!

Step 1

Let’s start by trimming a piece of Classic Crest Solar White to 3 1/2” x 4 3/4”. This is my go-to cardstock – not only is it great for stamping, it is perfect for ink blending also. I am blending Memento Summer Sky ink with Altenew’s Styled Background stencil set. 

Step 2

Next, turn the stencil 90 degrees, and ink blend with Memento Paris Dusk ink. I picked the light and dark blue color scheme today because it is gender-neutral, and they pair well with the DCS Blue Calico and Indigo Blue cardstock that I’ll be using later. 

Step 3

Rotate the stencil once again, and ink blend with Memento New Sprout ink. You can see how smoothly the ink blends on the Classic Crest Solar White cardstock. There are no streaks or splotchy areas. 

Step 4

For the last color, ink blend Memento Bamboo Leaves after you turn the stencil 90 degrees. 

Step 5

This is what the final geometric pattern looks like after all of the ink blending. Since the Classic Crest Solar White cardstock has a really smooth surface, the end result looks like the patterns were airbrushed onto the paper. 

Step 6

Now we are ready to add the sentiment of the card. I wanted the sentiment to match the patterned background, so I picked DCS Blue Calico and Indigo Blue cardstock. I die cut alphabet letters from these cardstock with Stampin’ Up’s Mini Alphabet die. One thing to keep in mind is that the DCS cardstock has a textured side with linear grains. Be sure to die cut letters of the same word by placing the dies in the same orientation to achieve a more cohesive result. 

Step 7

Finally, trim a piece of DCS Blue Calico to 3 3/4” x 5” and adhere the ink blended panel on top. Then mount the layers onto an A2 sized card base with DCS Indigo Blue cardstock. Lastly, apply On-Point Glue to the back of the letter die cuts and adhere them to the card front to complete the Father’s Day card with geometric pattern background.

The post Father’s Day Card with Geometric Pattern Background appeared first on CutCardStock Blog.

The birthday cards

For the birthday cards I used a peacock letterpress plate with Savoy 100% Cotton cardstock. I letterpressed the first using a random application of Catherine Pooler inks and the second with Dress Blues. Both are mounted on Classic Crest Patriot Blue cardstock.

I kept the first card very simple as the multi-colored inks were so lovely as is. Thus, I just embossed the sentiment with Versamark and Ranger Black Detail Fine embossing powder.

Conversely, on the second card I spent quite a bit of time watercoloring the image with Derwent watercolor pencils. In addition, I applied Kuretake Gansai Tambi gold watercolor to really make this pop.

Check out how fabulous it looks with the hot-foiled sentiment!

the thank you card

After all that detailed watercoloring, I kept the thank you card super simple.

I embossed a Cougar White cardstock panel and lightly brushed it with leftover ink on my brushes. I trimmed this down and adhered it to a Classic Crest Patriot Blue cardstock panel. Again, I used gold for the sentiment, using Bright Foil Gold cardstock and embossing, both back by more of the Classic Crest Patriot Blue.

the sympathy card

Given my personal preferences, the sympathy card is the simplest of all. As before, I letterpressed the image on Savoy 100% Cotton cardstock using a selection of more muted Catherine Pooler inks.

I stamped the sentiment right on the card front in Versafine Clair Nocturne. In keeping with the other cards in this gift set, I mounted the panel on Classic Crest Patriot Blue.

Thanks for stopping by and checking out my gift set of peacock cards. Have a great rest of your day!

For a full list of products used on this project, be sure to visit my blog.

You can also visit the CutCardStock Facebook Page for more DT inspiration or join our Creating with CutCardStock Facebook Group and share your own creations with other CutCardStock fans.

The post Gift Set of Peacock Cards appeared first on CutCardStock Blog.

Step-by-Step Instructions

Step 1 — Foil the Background Panels

Start by foiling A2 panels using Opaque White Glimmer Foil. The striped design adds subtle texture and interest while still allowing the rosette to remain the focal point.

The Blue Calico cardstock has a beautiful texture but still foils wonderfully, making it perfect for this technique.

Step 2 — Die Cut the Rosettes

Using the PixiDust Designs Fancy Rosette Dies, die cut the rosette strips.

• Cut two strips per rosette from White, Navy and Red cardstock
• Each strip includes engraved fold lines to create the fan shape
• Fold accordion-style following the score lines

Tip: Use strong adhesive or double-sided tape, especially when working with heavier cardstock like the navy and red. This helps keep the rosette securely closed.

Join the two strips together to create a full circular rosette. Add the center circle layers and decorative toppers.

Step 3 — Stamp the Sentiments

Stamp the encouragement sentiments onto strips using the Erin Lee sentiment stamps.

Trim the sentiment strips and add foam squares to the back for dimension.

Step 4 — Assemble the Patriotic Encouragement Cards

• Attach the foiled A2 panel to a white card base
• Securely adhere the rosette using strong adhesive
• Add the sentiment strip below using foam squares

Make sure the rosette is firmly adhered since it creates the main dimension.

Step 5 — Add Finishing Details

To complete the card:

• Add white paint splatter for extra interest
• Sprinkle a few embellishments
• Press everything firmly into place

These finishing touches help tie the entire design together.

These dimensional rosette cards are bold, uplifting, and easy to customize with different colors and sentiments. The combination of textured cardstock, foiled stripes, and layered rosettes adds beautiful depth while keeping the design elegant and meaningful. Whether you’re creating encouragement cards, sending support, or simply brightening someone’s day, this versatile design makes it easy to craft a heartfelt message with style and dimension.

Until next time, stay crafty!

Sweta.

Supplies Used

Cardstock

• Conservation Flat White Cards 5×7 https://www.cutcardstock.com/products/heavy-recycled-110-lb-precut-card-stock
• Classic CREST Smooth 130 lb Solar White https://www.cutcardstock.com/products/neenah-classic-crest-130lb-cardstock?variant=668597041
• Lessebo Navy Blue Cardstock https://www.cutcardstock.com/products/navy-blue-cardstock
• Canvas Texture Blue Calico Cardstock https://www.cutcardstock.com/collections/all/products/blue-calico-discount-cardstock
• DCS Red Pepper Cardstock https://www.cutcardstock.com/products/dcs-red-discount-12×12-cardstock

Other Supplies

• PixiDust Designs Fancy Rosette Dies
• Erin Lee Sentiment Stamps
• Spellbinders Glimmer Foil – Opaque White
• Foiling Machine
• Strong double sided tape / liquid adhesive
• Foam squares
• White splatter (paint or acrylic ink)
• Embellishments

The post Patriotic Encouragement Cards appeared first on CutCardStock Blog.

Create the Focal Images on Colored Cardstock

Start with a sheet of Basis Light Yellow Cardstock. Stamp the floral image using a crisp black ink. Be sure the ink outline is completely dry before moving on. I used Altenew’s Beauty Within Stamp set that has a coordinating stencil set.

Use the coordinating stencils and blend colors of your choice to create the depth and texture on the images. I used Altenew Inks because they organize their inks in families, making it super easy to choose colors!

Once the ink is dry, die cut or fussy cut the images so you are ready to design!

How About Colored Strips for the Background?

The card needed a pop of color or texture in the background. I went for color! Use an A2 sized piece of 80 lb. White Cougar Cardstock. Choose two of the colors you used for the flowers and leaves. Rub the ink pad directly onto the cardstock being sure to get consistent colors. The direct-to-paper technique allows more saturation when compared to ink blending with a tool.

Trim the piece into strips on the long side. Mine are about 1/2 inch.

Let’s Put the Card Together!

Trim a piece of 80 lb. White Cougar Cardstock to 4.0 x 5.25 inches. Arrange the colored strips at an angle over the center of the panel. Once you are happy with the arrangement, attach the strips to the panel.

Add a stamped sentiment of your choice in the bottom left corner of the panel.

Arrange the blooms and leaves over the stripes. You can add more interest by popping up the smaller bloom using foam tape!

Attach the smaller panel to the front of an A2 card base made with 110 lb. Cougar Cardstock. I love this heavier cardstock as it provides a substantial base for your cards! The Lemon Drop Pop -Tone Envelope is perfect to set off the colors!

Thanks for stopping by! I hope you will try ink blending your next project starting with a light colored base! Using colored cardstock for stenciling yields dynamic results! Stop by CutCardstock and check out the wide variety of cardstock available!

Be Well and Be Creative, my friends.

The post Colored Cardstock for Stenciling appeared first on CutCardStock Blog.

Card Base

This card starts off with Desert Storm Cardstock that I used for the base and inside layers. I stamped several of my images directly onto the Desert Storm Cardstock. I love the slight “speckles” you see in this cardstock. It’s like a literal desert storm with the wind blowing. It’s fabulous!

Layering & Stamped Images

Two of the cut-out spaces, as well as all the fishing images, were cut using Natural White Cardstock. As you can see, all of my stamped images look fabulous stamped onto either color of this cardstock. The papers are absolutely gorgeous.

Final Touches on Masculine Fishing Card Design

That STUNNING blue paper that I used for the second base layer and the tackle box were cut using Lessebo Premium Misty Blue Cardstock. Again, the weight and thickness of this high-quality paper is amazing. It’s firm, easy to work with, cuts so nicely, and really makes my card pop with color. And here’s some GREAT NEWS…..this amazing Lessebo 83lb Premium Color Cardstock comes in a wide variety of beautiful colors to help you with any and every project.

Thanks so much for visiting today and I hope you found some inspiration from my masculine fishing card design. I hope you’ll take some time to visit CutCardStock to see all the awesome colors and varieties of cardstock they carry. You’ll absolutely LOVE it as much as I do, I’m sure. There’s always lots of great ideas and inspiration on the CutCardStock Blog and CutCardStock IG Page. Have a blessed and creative week, everyone.

Karen

The post Masculine Fishing Card Design appeared first on CutCardStock Blog.

Why These Cardstocks Work So Well

For this card, I chose Cougar White Smooth CardStock 110 lbs for the card base and sentiment shadow because it creates a sturdy foundation and has a smooth finish that is perfect for crisp die cuts.

The Yellow Jacket DCS Discount Card Stock adds a warm, sunny tone for the flowers and butterflies. It blends beautifully with ink, making it easy to create soft shading and dimension.

The Hydrangea Purple DCS Discount Card Stock provides contrast and richness for the layered floral elements and sentiment. The smooth surface makes the ink blending seamless, especially around the petal edges.

Step 1: Die Cut and Ink Blend the Floral Pieces

Begin by die cutting the floral elements from the Golden Poppies Die Set using Yellow Jacket DCS Discount Card Stock and Hydrangea Purple DCS Discount Card Stock.

Use Sunkissed Ink to softly blend color onto the yellow flowers and butterflies. Then use Lavender Ink to add shading around the edges of the purple flowers and butterflies. For the leaves and stems, apply Olive Ink over the yellow cardstock to create natural greenery.

This simple ink blending technique adds depth and brings the die cuts to life while keeping the color palette clean and cohesive.

Step 2: Build the Floral Arrangement

Assemble the layered floral pieces with liquid glue.

Cut a 4 1/4″ x 5 1/2″ top-folding A2 card base from Cougar White Smooth CardStock 110 lbs. Arrange the flowers in the center of the card front, mixing heights by attaching some pieces with liquid glue and others with foam squares.

This layering trick adds beautiful dimension while maintaining the clean and simple style.

Step 3: Create the Sentiment

Die cut the shadow layer from Cougar White Smooth CardStock 110 lbs using the Hugs Edger Die Set.

Next, die cut the word layer from Hydrangea Purple DCS Discount Card Stock. Adhere the purple sentiment to the white shadow layer with liquid glue, then attach it to the bottom of the card front using foam adhesive.

The layered sentiment helps anchor the floral arrangement and adds a soft elegant touch.

Step 4: Add the Finishing Details

Use a black gel pen to color the butterfly bodies before adhering them around the floral arrangement. Attach some butterflies flat with liquid glue and others with foam adhesive for extra movement.

For sparkle, brush clear shimmer pen onto the flowers and butterfly wings. Finish the design by adding a few Glasier Jewels around the card front and in the centers of some flowers.

These final details make the card shine while enhancing the soft, dimensional look.

Final Thoughts

I wanted this card to feel bright, cheerful, and full of floral charm while keeping the design simple enough for any crafter to recreate. Limiting the palette to yellow, purple, and green helps the arrangement stay balanced, while the layered die cuts add texture and depth.

A helpful tip when working with layered florals is to vary the adhesive height. Using both liquid glue and foam squares creates natural depth and keeps the arrangement from looking flat.

I hope this Floral Hugs Card inspires you to create something bright and beautiful with your favorite CutCardStock papers! If you give this project a try, I’d love to hear about it in the comments below. What color combination would you use for your floral bouquet?

The post Clean and Simple Floral Hugs Card with Bright Die Cut Layers appeared first on CutCardStock Blog.

This card features a textured brick background, soft floral accents, and a bold yellow umbrella. This design is full of dimension, movement, shaker bits and an encouraging sentiment that is sure to raise spirits.

Supplies for Uplifting Umbrella Shaker Card

• Classic Crest Solar White Cardstock
• DCS Canvas Textured Rubber Ducky Yellow Cardstock
• Lessebo Salt Water Blue Cardstock
• Bright Foil Silver 10 pt Cardstock
• Brick embossing folder
• Die-cutting machine
• Floral corner die
• Umbrella die
• Shape die (for shaker window)
• Acetate
• Foam adhesive
• Sequins or shaker mix
• Ink blending tools & inks
• Sentiment stamp & black ink
• Liquid adhesive

Step 1: Create the Card Base

Cut a piece of Classic Crest Solar White Cardstock to 7 x 10 inches. Score at 5 inches on the 10 inch side, fold and burnish to create an A7 (5 x7 inch) card base. Set aside.

Step 2: Die Cutting for Uplifting Umbrella Shaker Card

Use a shape die to cut a window from the center of a 4 3/4 x 6 3/4 inch piece of Classic Crest Solar White Cardstock. This will be the focal area for your shaker.

Die cut 2 floral corner pieces out of Classic Crest Solar White Cardstock.

Cut 2 umbrellas. One out of Bright Foil Silver 10 pt Cardstock and one out of DCS Canvas Textured Rubber Ducky Yellow Cardstock. The silver piece serves as the base of the umbrella. Trim the handle and top off of the yellow umbrella. Draw in sections and shading on the yellow piece. See photo for reference.

Step 3: Inking & Stamping Sentiment

Run the shaker window panel through your die-cutting machine using a brick embossing folder to create texture. Add ink with an ink blending tool to the raised areas.

Ink the floral borders to add color and adhere to the embossed panel.

Cut a piece of Lessebo Salt Water Blue Cardstock to 5 x 7 inches for the card background and base of the shaker. Stamp the sentiment so it will be seen through the shaker window. Adhere to the white card base.

Step 4: Build the Shaker

Attach acetate behind the window opening. Add foam adhesive to the back side.
Pour sequins or shaker mix onto the card base.
Adhere the panel to the card base.

Step 5: Finishing the Uplifting Umbrella Shaker Card

Assemble the umbrella pieces and adhere to the card.
Add sequins to complete.

You now have a bright and uplifting umbrella shaker card featuring texture, movement and a pop of sunny color! The combination of embossed detail, soft florals, and interactive elements makes this a standout design for any occasion.

Thanks so much for checking out my project. I hope you’ve enjoyed it.

For more inspiration join us over on the CutCardStock Facebook Page and the Facebook Group Creating with CutCardStock. And check out our CutCardStock YouTube Channel too!

Until next time,
Judy V

The post Uplifting Umbrella Shaker Card appeared first on CutCardStock Blog.

Hi Carrianne here! I’m excited to walk you through each step so you can recreate this card and send a little light to someone special.

Supplies & Materials

CutCardStock Colors Used:

• DCS Dolphin Gray
• Classic Crest Solar White
• Pop Tone Red Hot
• DCS Surf
• DCS Yellow Jacket
• DCS Gumdrop Green

Other Supplies:

• La-La Land Crafts: June 2025 Kit of the Month, Cloud, Grass Border Dies, Snowbanks Die
• Distress inks: Tumbled Glass (sky), shading die elements
• Copic Markers: (C0) for clouds and lighthouse highlights
• Adhesives: liquid glue, foam tape for dimension
• Altenew for sentiment

Step 1: Die Cut All Elements

Before we start assembling the card, it’s helpful to cut all the pieces from CutCardStock first. Laying them out lets you see the colors and plan where everything will go.

Step 2: Add Shading to Grass and Sun

Next, we add shading to the grass and sun. This step brings dimension to flat cardstock and gives your card a more realistic and lively appearance.

Step 3: Shade the Lighthouse

Now it’s time to add shading to the lighthouse. Red highlights help define the structure and make it the focal point of the card.

Step 4: Clouds and Lighthouse Highlights

Once the lighthouse is shaded, we move to the clouds and small details. Light shading on clouds and marker highlights on the lighthouse add subtle depth without overpowering the scene.

Step 5: Blend the Sky Panel

With the pieces prepared, we create the sky. Using Tumbled Glass distress ink, blend from the top down to leave a soft, daytime sky that will serve as the perfect backdrop.

Step 6: Add Water and Adjust Sun

At this point, I decided to make a small design change. Originally, I planned to use two layers of grass, but as the scene came together, it felt a bit heavy at the bottom. Instead, I removed one grass layer and added DCS Surf cardstock using a snowbanks die to represent water. This simple change lightened the design and felt more natural for a lighthouse scene. I also swapped the large sun for a smaller one, cutting it from DCS Yellow Jacket again, to give the sky more breathing room.

Step 7: Test the Layout Before Adhering

Before adhering any of the main elements, I used tweezers to temporarily place the lighthouse on the panel. This allowed me to arrange the clouds and sun around it and make sure the sky felt open and balanced before committing with adhesive.

Step 8: Adhere the Scene

Once the layout was finalized, all of the elements were adhered to the panel. The small cloud was glued directly to the background, while the larger cloud was popped up with foam tape so the sun could peek out from behind it. The lighthouse was secured with a small piece of foam tape near the top for subtle dimension, and a tiny seagull was added as a finishing touch.

To complete the card, I stamped the sentiment directly onto the panel in the open space to the right of the lighthouse. The finished panel was then adhered to a DCS Dolphin Gray card base, which frames the scene and helps the colors stand out.

Taking a closer look really shows how all the pieces come together and the subtle details that make the card special.

Thanks so much for following along! I hope this lighthouse card inspires you to create your own layered encouragement designs. If you give this card a try, I’d love to hear about it — leave a comment below and share your thoughts or tips!

—Carrianne

The post Encouragement Card: Layered Lighthouse Scene appeared first on CutCardStock Blog.

Build the Perfume Bottle Shaker

First, start with a rectangle cut in Stardream Metallic Pluto White. Make sure the cut you use has nested dies to go with it. Cut one folded card in Classic Crest Solar White in the same dimensions.

Next use the rectangle die and one shape smaller and cut approximately four or five frames in Classic Crest Double Thick Solar White. I like to use this weight because it’s thicker and will make a nice cavity for the shaker bits, and you don’t have to cut any foam.

Glue those frames together, then glue it onto the white rectangle. Additionally, dust the edges with a dryer sheet to remove static cling. Fill the cavity with assorted sequins or beads in your chosen color. I like both for glitter and noise!

Now adhere a piece of acetate to the top frame, after you’ve lightly tapped it on a dryer sheet. Cut one final frame in your chosen color. I chose the Stardream Metallic Pluto White. Glue it to the top. Disregard the bottle top in the picture, we’re coming to that next.

Build the Perfume Bottle Shape

It’s time to build a perfume bottle! First, start with a top note style die cut, preferably a smaller one with a rounded top but anything that would resemble perfume bottle cap. Cut this in CCS Gold Glitter.

Next, cut another perfume bottle cap shape in Silk Glitter Black Prince and Stardream Metallic Rose Quartz and trim a few strips to adhere to the top of your CCS Gold Glitter cap. Glue this to the back of your rectangle.

Then, adhere the folded card to the back of the panel. This will cover the bottom of the perfume bottle cap, so it’s not seen from the back.

Embellish the Bottle

Now it’s time to print your sentiment on your perfume bottle shaker card. I chose NO.25 to represent a Chanel bottle because my daughter was turning 25! If this is for another event or Mother’s Day, here are some of my ideas for you:

• No. 1 Mom
• Forever Her
• Est. (birthyear)
• La Vie de Mom

As you arrange the image on your computer, make sure it fits your top note shape that you will use for the label. I used Classic Crest Solar White because it prints up so nicely on my printer! Additionally, you could add images as well, especially if you have an electronic cutting machine.

Finally, it’s time to embellish! I used the same CCS Gold Glitter frame to put around my label. I cut a bow in Stardream Metallic Rose Quartz and added a large rhinestone to the top. I am so excited about this project and want to make several in many shapes and colors.

I think if you have a need to make Mother’s Day cards, this would be the perfect one to create! It’s perfect for birthdays as well or even girlfriend gifts. What colors would you choose? No matter what, I hope you decide to check out the amazing colors at the CutCardStock website. Until next time!

The post Perfume Bottle Shaker Card appeared first on CutCardStock Blog.

Step 1: Gather Your Supplies

Step 2: Die Cut the Elements for Floral Mother’s Day Card

First, die cut the flowers to be used on this floral Mother’s Day card.
LEAVES: Scottish Highland Textured Cardstock, Pearl Green Curry Textured Cardstock
FLOWERS: Hydrangea Purple Textured Cardstock, Plum Textured Cardstock, Aqua Cardstock, Light Yellow Cardstock, Yellow Jacket Textured Cardstock, Orange Fizz Cardstock , Flame Tree Orange Textured Cardstock, Pink Lemonade Cardstock, Pop-Tone Razzleberry Cardstock
CUP & SENTIMENT: Patriot Blue Cardstock
BACKGROUND LABEL & SENTIMENT LABEL: Classic Crest Solar White Cardstock

Second, die cut the sentiment word ‘happy’ three times from the Patriot Blue Cardstock. Next, adhere them together to create a chipboard type word.

Step 3: Assemble the Florals

Adhere all the flower pieces together using wet glue.

Step 4: Cut the Card Base & Labels

Now cut a 5″x7″ size card base. Create a layered label for the card front. Then gather the other elements for the card.

Step 5: Put the Floral Mother’s Day Card Together

Glue the Pre-cut 5″x7″ Textured Beetle Black Textured Cardstock to the card base. Additionally, adhere the two background label shapes together.

Add the cup and the background leaves to the card front. 

Arrange the flowers in the cup.

Stamp the sub-sentiment on the small label cut from Classic Crest Solar White Cardstock and add the sentiments to the card front.

Finally, add a few tiny gold gems to the flower centers and around the flowers. Here is a close up of the flowers.

This pretty floral Mother’s Day card is complete!

Thank you for stopping by the blog today – I hope you found some inspiration!!

Have fun as you create with our amazing cardstock, envelopes and other products we carry at CutCardstock!

The post Floral Mother’s Day Card appeared first on CutCardStock Blog.

Cut Card Base & Layers

Firstly, cut a mini slimline card base from Lessebo Navy Blue at 6″ x 7″ and score it at 3-1/2″ on the long side. For reference purposes, I make my finished mini slimline cards 3-1/2″ x 6″. That size fits perfectly in a #6-3/4 size commercial envelope.

Secondly, cut front and inside layering panels from Dolphin Gray cardstock.

Thirdly, cut your tissue box panel for the front to the desired size. Then cut a panel just slightly larger than the tissue box panel from Bright Silver Foil.

Finally, cut an inside sentiment panel from Neenah Classic Crest 80# Solar White.

Optional: Cut a smaller piece from the tissue box panel to embellish the inside sentiment panel. Can layer that onto a scrap piece of Dolphin Gray like I did.

Die Cut Front Sentiment

Die cut a large sentiment twice and adhere them together for a little dimension. Affixing adhesive sheet to the back of the die cuts make them a breeze to adhere together.

Adhere Layers

Create the front panel by adhering the tissue box panel to the silver foil and then to the gray panel.

Next, create the inside sentiment panel by adhering the small piece of tissue box to the left side of the white panel. Finish this by adhering it to the gray panel.

Add Sentiments

Now add the die cut sentiment to the front panel and stamp a sentiment on the inside panel.

Complete Easy Mini Slimline Card

Finish the card by adhering the front and inside panels to the card base.

Additionally, add several silver glitter enamel dots.

Summing up, these are the other products I used:
PAPER/CARDSTOCK: Tissue box
STAMPS: Stampin’ Up Charming Sentiments stamp set
INK: Memento Paris Dusk ink
DIES/PUNCHES: CUTplorations Happy Everything die (from STAMPlorations)
ACCESSORIES: Fiskars 12″ ProCision Rotary Bypass Paper Trimmer, Spellbinders 12×12 Scoring Board, Mini MISTI, Big Shot, Scrapbook Adhesives Adhesive Sheets and E-Z Runner Permanent Strips, Eyelet Outlet silver glitter enamel dots

To conclude, I hope you’ve enjoyed this easy mini slimline card, and I’d love to know if you make one! Be sure to visit CutCardStock on Facebook, Instagram and Pinterest for more DT inspiration! Also join our Creating with CutCardStock Facebook Group for even more crafty inspiration! Thanks so much for stopping by today – we’ll see you next time!

Scrappy hugs,
Leslie

The post Easy Mini Slimline Card appeared first on CutCardStock Blog.