Design Adventures

Slouchy Beanie

2013-09-02T19:26:00.000-06:00

Supplies:

Red Heart Soft in Grape

I Hook
H Hook

Magic Circle

R1: Ch 3. 13 DC in circle. Join in top of ch 3.

R2: Ch 3. 4 DC in 1st st. Skip next st. *5 DC in next st. Skip next st.* Repeat around. Join in top of ch 3.

R3: Ch 3. Skip 5 DC's. *1 DC, ch 3, 1 DC (hereafter referred to as V-st) in sp after DC's* Repeat. Join in top of ch 3.

R4: Sl St in center of V-st. Ch 3. 4 DC in V-st. V-st. *5 DC's in next V-st, V-st in next sp* Repeat. Join in top of ch 3.

R5-R13: Turn work. Sl St in center of V-st. Ch 3. 4 DC in V-st. *Sk 4 st. V-st. 5 DC in next V-st.* Repeat. Join in top of ch 3.

R14: Switch to smaller hook. Ch 3. 1 DC in each st around. Join in top of 1st DC made.

R15: Ch 3. 1 DC in each st around. Join in top of 1st DC made. Tie off & hide ends.

Hooded Scarf

2013-08-30T07:00:00.000-06:00

Supplies:

1 Skein Lion Brand Thick & Quick in Fisherman

N Hook

Ch 58.
R1: DC in 3rd ch from hook. SC in next st. *1 DC, 1 SC* to end.
R2-R12: Ch 2. *1 DC around the post of SC below, 1 SC* in each st across.

Fold your work in half along the long edge, placing the fold on your left side. Ch 1. Insert hook through 1st st on both sides. Using SC stitches, join edges together to the end.

For Scarf:
-R1: Join yarn in one corner of hood. Ch 2. 1 DC in each of next 6 st.
-R2-R35: Ch 2. DC to end.

Repeat on other side of hood.

Upgrading a Basic Beanie

2013-08-26T13:19:00.002-06:00

Supplies:

1 skein Lion Brand Thick & Quick in Charcoal

Red Heart Super Saver in Gray

N Hook

R1: Ch 3. 8 DC in 1st ch. Join in top of 1st DC made.

R2: Ch 2. 2 DC in each st to end. Join in top of 1st DC made.

R3: Ch 2. *2 DC, 1 DC* Repeat to end. Join in top of 1st DC made.

R4: Ch 2. *2 DC, 1 DC in each of next 2 st* Repeat to end. Join in top of 1st DC made.
R5: Ch 2. *2 DC, 1 DC in each of next 3 st* Repeat to end. Join in top of 1st DC made.
R6: Ch 2. 1 DC in each st to end. Join in top of 1st DC made.
Continue R6 to desired length.

Adding surface crochet band:
Join yarn between rows by inserting hook from outside to inside of hat, then around strand of yarn to outside of hat. YO and pull up a loop. Continue this loosely around the entire hat and join in the 1st st made.

Fall Cowl

2013-08-19T12:45:00.002-06:00

Supplies:

1 Skein Lion Brand Wool Ease Thick & Quick Prints in Sequoia

N Hook

Ch 55 loosely. Join in 1st chain.

R1-R7: Ch 2. DC in each st to end. Join in top of ch 2.

After making the last join, yarn over and pull the remainder of the skein through the loop. Pull gently to secure. Wrap the remaining yarn loosely around your work and tie the end to a strand on the underside of the wraps, tucking the end of the yarn in to hide.

Floral Wreath

2013-08-14T13:57:00.001-06:00

Floral Wreath - Shown in Fall Colors

I've wanted to make a wreath for the fall for quite a while now. This one was really easy to throw together with some cheap supplies. The most expensive part was the wreath, which I got at Michael's for $5. This is a quick and easy project.

Supplies:

Wreath form of your choice - I chose one made of natural materials, twigs and sticks.

Flowers and leaves in your choice of colors - You can use fall colors, or choose other colors to suit the season or your preference.

Hot Glue Gun

Ribbon in coordinating color

Needle & Thread to sew ends of ribbon together

Instructions:

I began with the leaves. The ones I purchased were on 2 strands. I wrapped them around the wreath, gluing every few inches as I went along and tucking the ends into the wreath and gluing them in really well.

I pulled just the heads of the flowers off of their stems and hot glued them as I liked them. I also pulled off the green leaves from the flowers and glued them under some of the flowers to bring a little brightness.

To hang the wreath, I took a long piece of lace ribbon and glued it in the center of a thick green ribbon. Then I sewed the ends together, because I didn't want to worry that the glue wouldn't hold the weight of the wreath.

Easy!

Long time, no see!

2013-08-05T21:27:00.001-06:00

It's been a while!

I took some time off to move around (hubby got a job transfer) and have the most adorable baby ever.

Seriously, ever.

Awww...

Well, now that things have settled back down, I'll start working on some new designs for you guys! I'm hoping to throw a few other crafts in there as well. Just for fun. :)

2012 Top 100 Patterns - Guess who's in there? ;)

2012-12-19T21:15:00.002-07:00

Mustard Colored Ruffled Scarf

Our Mustard Colored Ruffled Scarf has been featured by AllFreeCrochet.com as a 2012 Top 100 Pattern of the Year! :) I am SO honored and excited! Thanks for all the love, my friends!

November Giveaway Winner!

2012-12-10T09:46:00.000-07:00

My sincerest apologies for not posting the winner WAY earlier! I've been very ill, and we also recently found out we are moving out of state (headed back home-woohoo!), so the last few weeks have been hectic.

Our winner is:

Kellie Cole Ledbetter!

Kellie, I've sent you an email. Please reply, so I can send out your pattern. :)

I haven't set up a December contest, because I know I will not be able to keep up with it this month. However, I should have something fun set up for you guys in January! ;)

Hooded Cowl

2012-11-13T08:32:00.000-07:00

Hooded Cowl

Materials:

Lion Brand Wool-Ease Thick & Quick Yarn in Barley

N Hook

*Note on adjustments: This pattern was created for my 3 year old daughter. It is easily adaptable, though! 1) Simply begin with more chains to make larger (or less chains to make smaller), 2) when beginning the hood you'll need to figure out how big to make the opening for the size you're looking for (you'll begin in the same stitch, but will end in a different stitch than is written), and 3) add more (or less) rows to the hood.

Keep all stitches slightly loose to allow the hood to move easier while wearing. Thick yarn like this can easily be pulled too tight and just be stiff.

Ch 35, loosely. Join with sl st in first ch made.

R1-R5: Ch 2. DC in each st around. Join in top of first DC made.

R6: Ch 2. DC in each of the next 25 st.

R7-R16: Ch 2, turn. Skip first st. DC in each st to end of last row, placing final DC in top of turning chain.

At the end of R16, you have a couple of options. You can tie off the ends here, then use a yarn needle and a long piece of yarn and sew along the top edge of R16 to create the hood. OR, you can do what I did: Ch 1, turn. Put ends of top of hood together and either sl st or SC across the entire work. Then, tie off you yarn. Turn the entire project inside out to hide that seam and you're done. :)

Big Bow Headband

2012-11-09T07:00:00.000-07:00

Big Bow Headband

This is going to be a fun hair accessory for girls to wear to all of those holiday gatherings!

Materials:

Caron Simply Soft yarn in your choice of color (I used Autumn Red)

H Hook

*Note: This pattern was written to fit my petite 3 year old. The pattern is adjustable, though! To make larger or smaller, just begin the band with enough chains to fit your child's head snugly. Once you start to stitch into the chains, they will stretch slightly-plus, as the headband is worn, it is likely that it will stretch out a bit and you want it to stay fairly snug on the child's head. You can also consider purchasing some elastic (as in the elastic used for waistbands in sewing) and sew that inside the headband.

Band:

Option 1:

Ch 68 (or to fit circumference of head). Join with sl st in 1st ch made. Ch 2. DC in each stitch around. Join in top of 1st DC made.

Option 2-a little more snug:

Ch 68 (or to fit circumference of head). DC in 3rd ch from hook, and each ch across. Tie off yarn. With this option, you should attach a button or some elastic to hold it in place on the head.

Bow:

Ch 30. Join with sl st in first ch made.

R1-R4: Ch 2. DC in each st around. Join with sl st in top of first st.

At the end of R4, tie off yarn.

Center of Bow:

Ch 10. DC in 2nd ch from hook and each st across.

Putting it all together:

Lay "Bow" on top of band where you would like to attach it. Take "Center" and wrap it around the bow and the band, then sew the ends together on the inside (where it will lay against the head). I recommend using a few stitches to attach the bow directly to the band as well, otherwise the bow will slide freely along the band.

Star & Wreath Ornaments

2012-11-06T07:00:00.000-07:00

Star and Wreath Ornaments

Star Ornament

Materials:

H Hook

Cotton Yarn (I used Peaches & Cream in Ecru)

Optional Materials:

Wooden Button

Thick Ribbon

Sewing Needle & Thread (to sew on button)

Glue Gun (to ensure that threads don't come loose after sewing)

Ch 5. Join in first ch made to form a ring.

R1: Ch 3 (counts as DC). 2 DC in ring. Ch 5. *3 DC in ring. Ch 5.* Repeat 3 more times. Join in top of first ch 3. You should have a total of 5 chain spaces.

R2: Ch 1. * SC in first st. Sk 1 st. SC in next st. In ch sp: 3 SC. Ch 2. SC in 3rd SC made to create picot. 2 SC* Repeat around to create star. Join with sl st in first st made.

Optional Decorating: Cut a length of ribbon and fold in half. Place the cut ends underneath a point of the star. Place button on top of the star and sew through all layers to attach button and ribbon to the star. Use a dot of hot glue on the ends of thread after sewing to ensure that your knots don't come undone.

Wreath Ornament

Materials:

H Hook

Cotton Yarn (I used Peaches & Cream in Forest Green)

Optional Materials:

Buttons

Thin ribbon

Glue Gun

Ch 10. Join to form ring.

R1: Ch 1. 15 SC around chains. Join in top of first SC made.

R2: Ch 2. Working in FRONT LOOPS ONLY: 3 DC in each st around. Join in first st made. Ch 1. Sl st around the post of ch 2 (you are working toward the base of this round). Ch 1. Sl st into bottom of the first DC made and drop yarn from hook. Turn the entire piece over. The side you are now looking at is the front.

R3: Insert hook through the work in the place closest to where you dropped the yarn from the hook. Pick up yarn and pull it through to the front. Turn work 180 degrees (upside down, but keep the front facing you). Working in FRONT LOOPS ONLY (these are what was the back loops that you did not work in previously): 3 SC in each st. Join in top of first SC made. Tie off and hide ends.

Optional Decorating: Create a bow out of the thin ribbon. Use glue to tack down the ends of the bow. You can also embellish with small buttons, glued to the bow.

I also tied yarn to the top of the wreath to create a loop to hang from the tree.

Autumn Scarf

2012-11-02T07:00:00.001-06:00

Autumn Scarf

Materials:

H Hook

Vanna's Choice Yarn in Autumn Print

Ch a multiple of 4.

R1: [2 TC, ch2, 1 DC] in 6th ch from hook. *Skip next 3 ch. [2 TC, ch2, 1 DC] in next ch.* Repeat to last 2 st. Skip next ch. 1 TC in final ch. Turn.

R2: Ch 3 (counts as first DC). *[2 TC, ch2, 1 DC] in next ch 2 sp.* Repeat across. 1 TC in top of turning chain.

Repeat R2 for pattern.

Consider adding a fringe or a fun border to this scarf!

November Giveaway!

2012-11-01T07:00:00.000-06:00

This month, Design Adventures is giving away a copy of our most popular pattern: Boot Socks! This pattern is at the intermediate level, but produces such a beautiful result! We've sold many pairs of these socks and copies of the pattern, so we know you will all love this one! Simply "like" us on Facebook, follow us on Twitter, become a follower of our blog, and leave us some love here on this post. For each of these, you will receive one entry into the drawing-so you can get 4 entries total! Good luck!

a Rafflecopter giveaway

Child's Apron

2012-10-30T07:00:00.000-06:00

Here is a fun child's apron that you can give to your little one as you prepare for Thanksgiving! Every child loves to be included when a family meal is being prepared. My kids LOVE to stand near me in the kitchen while I cook because they know they will get a chance to help out. This apron is great because they can use it in their play kitchen, or in the real kitchen, and then it can get thrown in the washer when it gets dirty. Here's to a great kickoff of the holiday season!

Materials:

H Hook

Caron Simply Soft Yarn (I used Strawberry for the apron and Off White for the ruffles)

Ch 42.

R1: DC in 3rd ch from hook and each ch across.

R2-R18: Ch 2, turn. DC in each st across.

R19-R22: Ch 2, turn. 2 DCdec. DC in each st across to last 4 st. 2 DCdec.

R23-R24: Ch 2, turn. DC in each st across. Do not cut yarn

Strap:

R1: Ch 2, turn. DC in each of next 5 st.

R2-R15 (or more rows if you need to make hole for head larger): Ch 2, turn. DC in each st across.

At the end of final row, attach yarn to other side of apron to create hole for neck. You can attach by using sl st, or cut and tie off yarn and sew with yarn needle.

Ties (make 2, attach to sides of aprons where first decreases started)

Ch 7. DC in 3rd ch from hook and each st across.

R2-R32: Ch 2, turn. DC in each st across. Tie off and hide ends.

Pocket:

Ch 32.

R1: DC in 3rd ch from hook and each ch across.

R2-R6: Ch 2, turn. DC in each st across.

R7: Ch 2, turn. DC in each st across. At end of row, SC around the other 3 sides of the pocket. Tie off yarn, leaving a tail long enough to sew the pocket onto the apron.

To add ruffles (Optional):

SC around the entire apron with same color you used for apron. Switch colors (if desired) and use 3 DC st's in each SC around entire apron.

Star Flower Applique

2012-10-26T07:00:00.000-06:00

Super Easy Star Flower Applique

Magic Circle (or ch 4, join)

10 SC in ring. Join with sl st.

-*HDC, DC, TC in next st. Ch 3, sl st in top of TC (picot). TC, DC, HDC in next st.* Repeat to end, creating 5 "petals" and then join with a sl st. Tie off and hide ends.

Shell Headband Earwarmer

2012-10-23T07:00:00.000-06:00

The star applique will be in an upcoming post.

Materials:

I Hook

Caron Simply Soft Yarn (I used Persimmon and Chocolate)

Button

Need & Thread (to attach button)

Ch 14.

R1: SC in 2nd ch from hook. Sk 2 st. 5 DC in next ch. Sk 2 st. 1 SC. Sk 2 st. 5 DC in next ch. Sk 2 st. SC in final ch. (2 shells created)

R2: Ch 2 (counts as SC). 4 DC in same st. *Sk 2 st. 5 DC in next st. Sk 2 st. 1 SC.* Repeat to end. (3 shells)

R3: Ch 3 (counts as DC). 2 DC in same st (Half shell). Sk 2 st. 1 SC. Sk 2 st. 5 DC. Sk 2 st. 1 SC. Sk 2 st. 5 DC. Sk 2 st. 1 SC. Sk 2 st. 3 DC. (Half shell).

R4-R38: Repeat R2 and R3 for pattern.

R39: Ch 1. SC3tog. Sk 2 st. 5 DC. Sk 2 st. 1 SC. Sk 2 st. 5 DC. Sk 2 st. 1 SC. SC3tog in next 2 st and top of turning ch. Ch 1 to secure.

Border:

Join yarn in SC in the middle of final row, between shells. Continue the fan pattern used in headband (using 5 DC's to create shell and using 1 SC between shells to anchor.)

When finished, sew a button at one end to secure it to the head.

Ruffled Leggings

2012-10-16T07:00:00.002-06:00

These can be altered and made to fit any size girl. The pattern is written to fit a toddler, size 3T. To make smaller, use less beginning chains (to fit around calf) and/or make less rows (shorter length). To make larger, use more beginning chains (to fit around calf) and/or make more rows (longer length).

Materials:

Red Heart "With Love" yarn in your choice of color (I used Grape Jam)

I Hook

Ch 20. Join with sl st to form ring.

R1: Ch 3. DC in each st around. Join in top of first DC made.

R2-R10: Ch 3. DC in back loops only of each st around. Join in top of first DC made.

To make ruffles, you will work backward on the rows you've already made.

R11: Ch 2. 4 DC in each st around. Join with sl st.
R12-15: Ch 1. Sl st around post of ch 2 in previous round. Ch 1. Sl st in the base of the ch 3. Ch 3. 4 DC in each free loop around legwarmer. (For info about crocheting in the free loops, check out the Ruffled Scarf Pattern) Join with sl st.

You can go on to make the entire legwarmer ruffled if you like. Simply continue creating ruffles all the way back over the legwarmer.

Sweet Hat with Bow

2012-10-12T07:00:00.001-06:00

New pattern for sale on Etsy & Craftsy! This pattern is easy to follow and produces SUCH a cute result! Check it out!

Mitered Square Dishcloths

2012-10-09T07:00:00.000-06:00

These dishcloths are super easy to make and have a big impact. The texture makes them fun and interesting. I've written the instructions to make them using 2 colors of yarn, but you could easily make them with only one color, or with several colors. It's all up to you!

Materials:

I Hook

Cotton Yarn (I used Peaches & Creme in a variety of colors)

Special Stitches:

SC3tog= Single crochet 3 together. Insert hook into first st and pull up a loop (2 loops on hook). Insert hook into next stitch and pull up a loop (3 loops on hook). Insert hook into next stitch and pull up a loop (4 loops on hook). Yarn over and pull through all 4 loops.

Created using 2 colors, Color A and Color B. These will be referred to as A and B throughout the pattern.

Begin with A.
Ch 35.
R1: SC in 2nd ch from hook and next 14 st. SC3tog. SC to end of row.
R2: Ch 1, turn. SC in each st until you reach the stitch just before the one created when you SC3tog. SC3tog (having the previous SC3tog be the center stitch of those 3). SC to end of row. In the final stitch, drop A and pick up B when pulling through the last loop of your SC.
R3: This is the right side. You will only work in the back loops when working the right side. Ch 1, turn. SC in each st until you reach the stitch just before the one created when you SC3tog. SC3tog. SC to end of row.
R4: This is the wrong side. You will work in both loops when working the wrong side. Ch 1, turn. SC in each st until you reach the stitch just before the one created when you SC3tog. SC3tog. SC to end of row. In the final stitch, drop B and pick up A when pulling through the last loop of your SC.

Continue pattern in like fashion. In the final stitches of the square, you will SC3tog making them into one final stitch. To create the border, you have two options:

Option 1 (continuing the color you end on to create the border): Ch 1. 3 SC in same stitch. Continue using SC around the entire square, using 3 SC in each corner stitch. Join with sl st in the top of the first SC made. Tie off and hide ends.

Easy Fingerless Gloves

2012-10-05T07:00:00.000-06:00

Easy Fingerless Gloves

Materials:

I Hook

Worsted Weight Yarn (I used Heather Grey)

Ch 32.
R1: DC in 3rd ch from hook and each st across.
R2-R14: Ch 3, turn. Skip 1st st. DC in each st across and in top of turning ch. Tie off at the end of the final row (R14).

To assemble:
Use a yarn needle and yarn. Sew up the first 5 stitches. Skip next 4-5 stitches (depending on how big you want your thumb hole to be), then continue to sew to end of glove.

October Giveaway!

2012-10-03T15:53:00.000-06:00

CROCHET ROSETTE HEADBAND PATTERN

Who's up for a giveaway?

This month, I'd like to give away a free copy of my pattern for the Crochet Rosette Headband! I'll be gathering entries for the whole month of October. You can earn multiple entries! Just use the buttons below to enter.

a Rafflecopter giveaway

Triangle Bunting

2012-10-03T10:31:00.000-06:00

So, I'm awful... No posts for the month of September?! Crazy! Plus, I'm not crazy about the quality of that picture. My good camera has been MIA since our last move, so I'm having to make do with my iPhone camera. Not great. :/

Life has been hectic and exhausting lately. I've had so many things going on that I can barely keep it all straight! Luckily for me, my family is amazing and they take good care of this mama. What a great hubby and kids I have!

Triangle Bunting (Shown in Candy Corn Colors)

Materials:

Yarn of your choice and the recommended hook for that yarn - I used a variety of different yarns and an I hook.

***Colors changes are up to you. I made 2 rounds of each color***

Ch 4. Join with sl st to form ring.

R1: Sl st in center of ring. Ch 3. 2 DC in ring. Ch 2. 3 DC in ring. Ch 2. 3 DC in ring. Ch 2. Join in top of ch 3.

R2: Ch 3, turn. 2 DC in sp. Ch 2. 3 DC in same space. Ch 2. 3 DC, ch 2, 3 DC in next sp. Ch 2. 3 DC, ch 2, 3 DC in remaining sp. Ch 2. Join in top of ch 3.

R3 and beyond: Sl st in space. Ch 3, turn. 2 DC in sp. Ch 2. 3 DC, ch 2, 3 DC in corner space. Ch 2. 3 DC in next space (along side of triangle). Continue in like manner - 3 DC, ch 2, 3 DC in each corner of triangle, and using 3 DC, ch 2 along the side space of the triangle.

Join the triangles in any way you wish to create a bunting.

Here's how I did it:

Ch 10. Join 1st triangle with SC in first st. SC along each st across triangle. Ch 5 between each triangle, then join the next in the same way. After joining all triangles and stitching across, ch 12. Turn work. SC in 2nd st from hook and each st across, adding a picot stitch above each space of the triangles (this means after you make a SC, ch 3 and sl st in same st).

Hood Hat

2012-08-28T07:00:00.000-06:00

This hat is SO easy, and produces a really cute result! The girls absolutely love them! In fact, I made one for Lili and Meili fell in love with it, so I had to make another right away! Check out those pretty girls! ;)

Super Duper Easy Hood Hat

Materials:
I Hook

Caron Simply Soft Yarn in your choice of colors (I used Strawberry for one hat, and Passion for another)

and/or

Red Heart Soft Yarn (not shown, but could be used)

and/or

Red Heart Shimmer (I used Pewter in both hats)

Hold 2 strands of yarn together throughout pattern.
Ch 72
R1: Dc in 3rd ch from hook. Sc in next st. *1 dc. 1 sc* Repeat to end of row. Turn.
R2-20: Ch 2. *1 dc. 1 sc* Repeat to end of row.

Stop here to fit a toddler. Continue to 24 rows for child sizes, 26-28 rows for teen or adult sizes.

At the end of your last row, do not cut your yarn! Fold your work in half, putting the shorter ends together. Using your yarn, sc through both sides to attach the sides together, making the hood.

For the braids:

Measure out about 20 strands of yarn to be TWICE the length you want your braids to be. Using a large crochet hook (or your fingers if you are well coordinated!) and pull the strands through the corner stitch at the bottom of the hood. The middle of all the strands should be where the crochet stitch is, and you should half equal amounts of yarn on either side. Put the ends together and braid. Wrap yarn around the bottom of your braid and tie a knot to hold together. Trim the ends to make them even if needed. Repeat on the other side.

Striped Pillow Cover

2012-08-21T07:00:00.000-06:00

This is a fun pillow cover to make, and can easily be made to fit into any decor. You can change up the colors however you like, and there are options to make it easy to remove from the pillow and throw in the wash.

Materials:

Your choice of yarn - Seriously, you could make this with just about any kind of yarn. I used Red Heart Super Saver yarn in Aruba and Grey Heather, because I know how rough my kids are on our couch pillows. ;)

Hook size recommended for the yarn you choose. In my case, I hook.

Yarn Needle.

*Keep in mind that not all pillows are the same size. This was made for a standard decor pillow, measuring 18"x18". You may want to measure your pillows and go from there. I tend to crochet fairly loosely, so you may want to make more/less chains in the beginning depending on how big of a pillow cover you want to make.

The pattern is written for 2 colors, but you can change your rows any way you like to match your style.

Begin with color 1 (Aruba)

Ch 52.

R1: Dc in 3rd ch from hook and each ch to end. 3 dc in last ch. Dc in each ch again, working back to first ch from other side of ch. Join with sl st.

R2: Ch 2. Dc in each stitch around. Join with sl st.

Optional: Change to color 2 (Grey Heather).

R3-R28: Repeat R2, change colors when you like.

I changed colors every 2 rounds, so I would have 2 rounds of each color, creating a medium-thick stripe.

At the end of your rounds, place pillow in the cover. You can either A) sew up the seam, or B) add buttons to one side and button the seams together, or C) add a zipper closure.

Bow Front:

You will first make one thick panel (shown in Aruba), then you will make a small panel (shown in Grey Heather) to wrap around the bigger panel.

Thick panel:

(Aruba)

Ch 22.

R1: Dc in 3rd ch from hook, and each ch to end.

R2-R28: Ch 2. Dc in each st across.

Tie off, hide ends.

Small Panel:

(Grey Heather)

Ch 10.

R1: Dc in 3rd ch from hook and each ch across.

R2-R6: Ch 2. Dc in each st across.

At the end of R6, wrap the small panel around the larger panel. This is like the center of the bow. When it is wrapped, stitch up the ends up the small panel.

Sew ends of large panel onto cover.

Hexagon Squares

2012-08-17T07:00:00.000-06:00

These are going to make a really fun afghan soon! I chose a yarn that has a really lightweight texture because I wanted this to be a really airy blanket. When my "squares" are finished and assembled, I'll post another picture!

Materials:

G Hook

Bernat Softee yarn in Soft Peach, Antique White, Mint, and Pale Blue - Amounts will vary depending on how many squares you make/size of blanket you want.

Notes: I alternated the 3 middle colors for each square for the sake of interest, but kept the borders white and plan to assemble them all with white. The color options are up to you, so I didn't put in the names of the colors, but will just refer to the colors as Color 1, 2, 3 and 4. You get to choose what order to put them in. ;) The pattern is worked from the center out, if that helps with your choices. I would recommend tying a small knot at the end of each round to help the yarn stay in place, as I am always afraid that changing yarns a lot will make a blanket fall apart!

Begin with Color 1:

Ch 4. Join to form a ring.

R1: Ch 3 (counts as dc). 11 dc in center of ring. Join with sl st in top of ch 3. (12 st)

Drop Color 1, join Color 2:

R2: Ch 3 (counts as dc). 1 dc in same st. 2 dc in each st around. Join with sl st in top of ch 3. (24 st)

Drop Color 2, join Color 3:

R3: Insert hook between posts of next 2 st's. Ch 3 (counts as dc). 2 dc in same st. Ch 1. Skip next 2 posts. *3 dc in next sp. Ch 1* Repeat to end of round. Join with sl st in top of ch 3.

Drop color 3, Join Color 4 (I used white for these rounds on each square):

R4: Join between 2 clusters of 3dc from previous round. Ch 4. Skip 3dc cluster. *sc in sp between clusters. Ch 3* Repeat around. Join with sl st in 2nd ch of ch 4.

R5: Insert hook in sp under ch's from R4. Sl st. Ch 3. 2 dc, ch 2, 3 dc in same sp. 3 dc in next sp. *3 dc, ch 2, 3 dc in next sp. 3 dc in next sp* Repeat to end of round. Join with sl st in top of ch 3. Tie off and hide ends.