DISCUSS POWER SPORTS Blog

Snowmobile Running Board Washouts

2013-08-07T13:11:00.001-06:00

When I bought my first snowmobile that I personally owned it came with Wasatch Recreational Products running board washouts.

They were GREAT!!! Snow would fall right through. This meant that I never had to worry about losing my footing due to snow buildup.

Then one day another sled presented itself which was too good of a deal to pass up. I sold my sled with the WRP running boards to my dad, and bought the new sled. It has stock running boards. I road last season, and I was constantly kicking snow with my feet to get rid of build up. It was annoying, and quite frankly a little dangerous. Why was it dangerous? Because I would jump over the seat to ride wrong foot forward, and slide off the running board, and ultimately fall off the sled. Now this didn't happen often, but it did happen.

So I set out to buy running board washouts for my new sled. I looked at the WRP boards first... they were $400+. Too expensive. I really like the look of Skinz Airframes, and the reviews are great.

I looked them up and they are about as much as the WRP's. I decided I could possible fabricate my own. After designing up a set on solidworks, and getting a bill of materials I figured I would need a little less than 20' of tubing to build my own. Chromolly is about $9.50 a ft. So rounding up, they would cost me $200 raw materials alone. Then i figured another $50-100 in powder coating them. So I decided that my labor to fab them up wasn't worth the $100 - $150 savings.

I looked into modifying the 2013 Polaris Pro's running boards to fit my ski doo, but that wasn't going to be possible once I really looked into it.

There are much cheaper insert solutions available, but I don't really like the look, and they don't clear away the snow as well as the WRP's or Airframes. Also deep down I really didn't want to go with an insert.

Eventually after weeks of research and planning I found what I ultimately bought.

Technically it is an insert, but It is a little different than other inserts. it is made of billet Aluminum. It also cuts away all of your running board, and reuses the outside rail only. I also got a good deal on them from www.KaNPowersports.com. They cost right about in the middle of the insert price point, and the full running board replacement price point. They came in the mail today. I will document the installation and write about it here. I am excited...

Thanks for reading,
DPS

I miss snowmobiling

2013-07-28T19:20:00.002-06:00

I will admit that even though this blog is called Discuss Power Sports. I am an avid snowmobiler. I love it more than all the other power sports. Don't get me wrong, I really love them all. However, Snowmobiling is always on my mind.

Just recently I decided to buy a down hill mountain bike helmet for snowmobiling. Ok, ok, all you naysayers hear me out. I know that mountain bike helmets are not Snell approved, but there is a lot of independent tests out there that prove that the Snell rating is really good if you are traveling in excess of 150 mph, but detrimental if going any slower anyways. A lot of those independent studies recommend buying a DOT approved helmet only. The helmet I bought is the SixSixOne Comp Shifted. It comes very very close to the exact regulations of DOT approval. So the other thing that comes into play is the kind of riding I do. If you look at the spedo on my videos you will notice that I am only traveling on average about 9 MPH on my snowmobile. Downhill mountain bike racers can reach speeds of 45+ MPH, and this helmet is rated to handle those kinds of impacts.

It would be nieve for me to think that we are going 9 MPH all the time. That just isn't true. Usually on the trail we average about 35 MPH and go as fast as 60 MPH on short bursts. But lets face it, if you crash at 60 MPH chances are you are going to be so mangled you may not live anyways. It is just part of the thrill I guess.

Why would I buy a mountain bike helmet you ask? Well I have two very good reasons. It only weighs 2lbs, and it only cost $60. To get a 2 Lb motorcycle helmet they are well over $400, and I just didn't want to spend that much. I went to a motorcycle store and weighed all their carbon fiber helmets that came in under $200. The lightest one was made by Corona, and it wasn't even carbon fiber. It did not have a Snell rating, and it was only $80. But it still weighed 2.3 lbs. I was surprised to see the full carbon and Kevlar helmets coming in even heavier than that.

Anyways my mind was made up after weighing all the motorcross helmet competition and studying the different test ran on the SixSixOne vs. a motorcycle helmet, and seeing how similar they are.

And for those who itch to do anything involved in snowmobiling, here is a video of one of our trips last year. Enjoy...

Thanks for reading...
DPS

better late than never

2013-03-22T23:28:00.003-06:00

The title to this post has to do with two things. First, I am sorry for not updating the blog in a while. Work has been crazy. So I say better that I start reposting on here late than never. Second, today we had a great ride on the snowmobile. Last week it was like 60° and the snow was almost melted completely off the road. This week it decided to really dump yesterday and today. It was one of the best rides of the season even though it is officially spring now. We were riding on about 2' of fresh fluffy powder. It was a ton of fun even though we where socked in most the day.

Below is a quick video if me from last week. Hope you like it.

Thanks for reading,
DPS

Getting back into the groove

2013-03-01T22:55:00.000-07:00

I have been having trouble lately finding extra time in my day to write something to the blog. I am sorry. I am working on as project at work that has been requiring a lot of my attention and time. By the time I get home the last thing I want to do is turn on the computer. I hope you understand. The project should be done in a month or so. Then I will be able to focus again on the blog, and forum, and YouTube videos.

Thanks for your interest,
DPS

Why wear protective gear?

2013-01-27T13:04:00.001-07:00

Story as related by Dooradical. You can find his profile at www.DiscussPowerSports.com. He has been a member there for a while. His story is as follows:

As many of you know I was bating around the idea of buying knee guards for some time. I always thought to myself I have never needed them in the past, so why would I need them now. I knew however that thinking that way was naive and kind of stupid. I finally decided that I needed some. This decision was helped by the fact that in 2005 my older brother crashed into a deep ditch and shattered his knee cap. He also wrecked the rental sled too.

Well this last Christmas my wife bought me some knee guards. They aren't anything really special. They only cost $20, but they easily paid for themselves last Friday.

We decided that it had been a couple of weeks since we had taken my dad out snowmobiling with us. My dad really enjoys going, but due to his age he has a hard time keeping up with his sons. So last Friday we decided to go to Hardware Ranch in Utah. It is a great place to go and ride trails. They groom them, and there are is a lot of pretty scenery to enjoy. They even have an Elk reserve during the winter. You can go on sleigh rides right though the middle of the herd. It is pretty sweet. The only down side is this year not a lot of snow has fallen at Hardware Ranch. As a matter of fact in some placed on the trail we where riding on rocks. But non the less it was a perfect place for my dad. And the fact that there wasn't any powder deterred my brother and I from getting off the trail in a spot that my dad would have a hard time in. So all in all it worked out.

When we were getting all our gear on, I had to decide if I wanted to wear my knee guards or not... after all we were just going to be on trails so why would I need them, Right? I decided to put them on anyways. Boy am I glad I did. We got into this bowl with a steep hill climb that usually is covered nicely in snow. Don't get me wrong, there was snow there, but not much. However there was enough to have covered up a ditch that ran across the valley. I decided I wanted to go climb the steep hill. I stopped about 20 yards from the base of the hill. Then I waited for my brother to catch up to me. Once he was there I started going up the hill. As I picked up speed I all of the sudden found myself off of my sled and feeling pain in my knee, neck, and back. My knee hurt the most. It felt like I kneed a brick wall. It was a dull throbbing pain. It is hard to explain, but I knew that if I had not been wearing my knee guards that the dull throbbing pain would have been much worse. I think I probably would have ended up like my brother, and in the hospital with a shattered knee cap. I am glad I didn't.

The sled was not hurt in the accident as far as I know. It just abruptly stopped the sled, and my bodies momentum carried.

The video is hard to see exactly what happened, but I will show you anyways.

Thanks for reading and watching,
DPS

Such a Cold Ride

2013-01-21T08:31:00.001-07:00

We went out on January 11th to see if we could find any of that fresh snow that had just fallen. To say the least it was cold and stormy up there all day. The cold really didn't bother me until the end of the day when we had to ride the trail home. Anything that had gotten wet absolutely froze stiff. For me that was my gloves. They didn't get wet inside, but the outside was damp. On the trail I started noticing that my fingers where getting a bit cold. I turned on my snowmobiles hand warmers. It helped a little, but not enough. Soon my hands were stinging. I eventually couldn't take it anymore. I stopped on the trail and with frozen fingers I unzipped my tunnel bag (Painful) and got out my spare gloves. Once I put them on I instantly felt warmer. Soon my hand warmers felt like they where actually doing something and the rest of the ride to the car was pleasant.

Lessons learned on this trip -
1. I have never needed to change my gloves before, and was seriously contemplating why I keep a spare set in my bag. Now I know that it is indeed a necessary item.
2. Extra goggles is a must. My goggles did fine the entire day. Until In the video you will see a part where I am climbing a steep hill (toward the end). Before climbing this hill I took my helmet off, and the inside of my goggles fogged up instantly. Usually in this situation I can just fan the goggles with my hand, or swing my helmet through the air to clear up the fog. On this occasion the fogged lenses was compounded by the frigid cold air. The fog condensed, and instantly froze. Ice formed on my lens. I climbed up the hill with very low visibility. This is dangerous to say the least.
3. Cary a GPS. With the low visibility at the end of the trip we almost got lost. Luckily one person in our group kept a good sense of where he was. Thanks PinNwiggle! We were on top of a ridge that we usually follow over and down to the trail. because of the low visibility we ended up one ridge over from where we needed to be. When we started following it down we ended up in unfamiliar territory. Eventually PinNwiggle got us back on track. Had he not of been there we could have been turned around for some time.

Ok, Ok, enough about that. Here is a video I threw together of our ride. Despite all the complaining you just read about above. We had a great time. We had my friend with us who doesn't have a lot of time on a snowmobile so we spent some time giving him some instruction too. It was fun to watch him apply what we said to do. If anybody wants to ride in Northern Utah or Southern Idaho area go to www.DiscussPowerSports.com, sign up and PM or Email me. We can arrange a trip and show you around.

Thanks for reading,
DPS

Cool New Sport

2013-01-15T12:37:00.004-07:00

If you have a paraglider, I have a snowmobile. Lets go to a field and give this a shot. It would be so much fun to try.

Thanks for reading,
DPS

Best Powder of the Season

2013-01-01T16:10:00.006-07:00

On December 27th 2012 we got up on the mountain right after a big storm. Well actually we got up there during the storm, but the biggest part of the storm happened the day before. It was so much fun to Boondock with powder flying over the hood. It was the first time that the snow has been deep enough to clog up my intake system and bog the sled down a little bit.

Bogging... It sucks really bad to have less power up on the mountain when you need it most. I have read that the earlier model Summit XP's have had the problem where the intake gets clogged with snow on the filter and then bogs the motor down. There are a couple of solutions out there that I have been looking into. There are some "do it yourself" solution (I like those) and some buy off the shelf solutions.

One of the off the shelf solutions that I saw last year was these little doors that you install on the top of your air box. They are cool because they stay closed unless the motor draws a certain amount of vacuum and the stock intake cannot deliver the amount of air needed. These are perfect for when the intake is clogged with snow. When you stab the gas the little doors open up allowing enough air to get to the carbs.

I did a search for these and I cant find them anymore. So I am asking for your help. If you know what I am talking about and know where I can find them, please leave a comment here letting me know where they are. Or better yet, go sign up on the forum www.DiscussPowerSports.com and start a post about it.

Anyways here is a video of our ride.

Thanks for reading,
DPS

Elevator Going Down

2012-12-31T20:07:00.003-07:00

My brother just bought a 2013 Polaris Pro 800 this year. I guess his 2012 Pro wasn't cool enough. Actually there are some fairly good reasons for him getting the 2013. His son has started coming out riding with us, so he needed something for him to ride. He gave his son the 2012 and upgraded to the 2013. Let me tell you, they are both nice snowmobiles. That is coming from a guy who rides a Ski Doo. I got a chance to ride it, and it feels different than my Ski Doo. For me it was harder to initiate a powder turn, and side hill, but I think that is really just a matter of getting used to the different geometry.

Anyway, Here is a pretty cool video of my brother descending down a 12' ledge on his new snowmobile. Hope you like it.

Thanks for watching,
DPS

Contour GPS helmet mount

2012-12-31T16:35:00.001-07:00

I have the best wife. DPS is always making videos of me, because he has a helmet cam, and I do not. That is until Christmas. My wife got me the Contour GPS with several types of mounts. In no time at all I broke all the mounts. I was so irritated, new camera and not usable due to cheap, poor designed camera mounts. Because I am cheap, and didn't want to re-buy a product that already failed, I came up with my own mount system. Maybe this will help you with creative ways to solve problems. http://www.youtube.com/watch?v=4w9eLb3vKqY&feature=youtu.be

First Powder of the Year

2012-12-28T11:31:00.003-07:00

Just wanted to share with you all our ride on 12-21-12. It was the first ride of the year that we didn't have to worry as much about buried treasures that wreck your snowmobile. Don't get me wrong though, it needed more.

Wish granted... It snowed a ton up there at Monte. I am working on a video right now that shows tons of powder shots to the face. It was amazing. I hope to have it up soon.

Thanks for reading,
DPS

My version of Breast Cancer Awareness

2012-12-17T19:02:00.001-07:00

This is my version of the Breast Cancer Awareness symbol. I just think it is important to get the word out. My grandma was a survivor of breast Cancer, and you can be too if you catch it early. Go get checked.

I will admit I had fun making this with my snowmobile.

Thanks for reading,
DPS

Our Snowmobile Ride 12-7-12

2012-12-16T20:00:00.001-07:00

Man, we almost didn't even get the sled out of the trailer. We drove up north 60 miles away in search of snow. When we got to the parking lot we where disappointed to say the least. There wasn't any snow, and you could see the dirt on the road where the snow had melted away. Not a good sign. After a second or two we decided that we drove the 60 miles we might as well get out there and put some miles on my brothers new sled to help break it in. Boy am I glad we did. As we got higher in elevation the snow started to get deeper and deeper. All of the sudden the trail had 6 to 12 inches on it. We finally got to an opening where we could climb our first hill. At the top of the hill we where all of the sudden in 35" of snow. There where some points that we probably where in as much as 40", but that was a bit more rare. Anyways here is a video of our first ride.

Thanks for reading,
Be sure to check out the forum at www.DiscussPowerSports.com
DPS

Growing the forum

2012-12-15T09:48:00.000-07:00

I just wanted to update everyone on the forum.

There are exiting things happening. We just got tapatalk installed and working. Keep your eyes peeled for the ability to become a premium member.

A premium member gets some perks that registered members do not. There is an area in the forum dedicated to premium members only. Other members can't even see the premium zone. They also can obtain permission to self promote and advertise on the forum.

We are growing but it is slow going. If you know anybody who is interested in power sports, please direct them to www.discusspowersports.com.

Thanks for reading,
DPSI

One Wheeled Motorcycle

2012-12-11T10:11:00.000-07:00

Sometimes I wonder what the future holds for motorsports. When I think about motorcycle I conclude that the manufacturers have done things the same way for years and years. They have just tweaked the aesthetics and powerplants, but the mechanical function is the same on all motorcycles. Where is the innovations? Well I happened across this video on YouTube. It is a one wheeled motorcycle. Take a look, I think you will agree that this thing is sweet.

Thanks for reading,
Check out the forum.
DPS

The Forum is Up

2012-12-09T16:00:00.001-07:00

Just wanted to let everybody know that the forum has officially been launched. Come sign up and be part of this exciting time. I am still tweaking some things as I figure stuff out, but it is mostly there. So far there aren't any posts, but you have to start somewhere. Please tell your friends. I am excited to see this community grow quickly.

Thanks for reading,
DPS

www.discusspowersports.com

Amsoil

2012-12-05T22:04:00.000-07:00

I did a maintenance top-end and two ring piston update on a ski-doo last summer that used Amsoil. The pipe, exhaust valves, & combustion chamber were clean with little to no carbon. Aside from a little water in the fuel wear, the pistons, rods and bearings looked great. Based on different teardowns Amsoil synthetic two stroke oil is what it claims to be.

I personally don't use Amsoil, but if my favorite brand raises thier cost much more I too will make the switch.

The oil that I use is far superior to Amsoil (proven in many lab tests, and ASE tests), however; Amsoil is probably "the best for the money" averaging over $20.00 a gallon cheaper.

Surprisingly Royal Purple is at the bottomof the list, and Motul pulls in just above them, just shows it is not always in the name!!!!

To see a copy of these federal breakdown and performance tests, stop by the shop-the four stroke line of oils are quite surprising in thier results as well-Honda factory oil was the bottom of that list-Maxima shines above them all.

We do sell Amsoil in our shop, and if I didn't believe it was a good product I would not support them.

One of the reasons I use amsoil

2012-12-05T17:54:00.001-07:00

Watch "AMSOIL INTERCEPTOR Performance Testing in a Ski-Doo E-TEC Engine" on YouTube

Incorporating technology on your ride

2012-11-27T09:43:00.000-07:00

I am a huge sucker for technology. I wish I had thousands of dollars to spend on all kinds of different goodies, but I don't. However there are some things that can be incorporated into your riding without a ton of cost. Here are a few...

GPS-
There are some good options out there for using a GPS on your rides. There are even some mounting options available too. Things to be mindful of are... In car navigation gps's like the Tom Tom do not work as well in the back country. Their screen is hard to see in the sun, and there might not be a preloaded map for where you are riding.

-What do I use?
My android phone. I little while back this wasn't a good solution but now Google maps offers the ability to cache map areas. So I have cached in my phone my favorite riding places. If i want to record my location, speed, heading, and elevation I can use Google's "My Tracks" app. The only thing it doesn't do is send out an emergency signal if I get lost or stuck. This brings me to my next device.

Spot... or something like it-
I personally don't have this device, but I see its value. Spot allows you to pay a subscription, then it will transmit your location. You can also send an "I am OK" text, or custom text to pre-programed numbers. This would be great for the snowmobiling back country. If you where to break down with no way out, and ended up spending the night, then this would alert your family where you are. You could then decide if you are going to freeze to death and need to be rescued, or if you are ok.

POV Camera-
This one is just for the cool factor. You can record your rides in 1080P video. These cameras have come a long way. Now Go-Pro offers one that is wifi enabled, and has a remote to start and stop recording with their new GoPro HD Hero3. It is very thin and light. Also it can record 720P video at 120 fps. This means you could make awesome slow motion shots.

This is one of those ares that as soon as you decide to buy something, another company comes out with something cooler. I still love my Contour GPS, but the new GoPro is very appealing.

Avalanche airbag-
These have come a long way. Every year there is more proof that an avalanche airbag really works to save lives most of the time. ABS has come out with a new product for their avalanche airbags system. It is a detonation handle that transmits a signal to the other handles around, and detonates their bags too. It can be set up to only detonate your own bag, to only detonate other bags, or to detonate every bag around.

This would be nice to have because most of the time when somebody is doing something dangerous on a slope, others are watching. If say my friend was snowmobiling on a hill, and caused an avalanche, I could remotely detonate his bag so that he can concentrate on maneuvering his machine away from danger.

Avalanche beacon-
This was my first purchase for safety. If you get buried in an avalanche it transmits a signal so that others with beacons can find you. There are many beacons out there, but I highly recommend a three antenna beacon. They are more accurate than older predecessors.

These are just a few of the many technology options you can think about using or incorporating for your next ride. If you have any others please let me know about them by commenting bellow.

Thanks for reading,
DPS

SxS "Dusting Death"

2012-11-26T17:18:00.000-07:00

A quick heads up for all of you side-x-side owners/lovers out there looking to do some mods. I have rebuilt many top ends to these units this last season due to "pod" air filters!!!

The intake system is usually in the worst conceivable spot in relation to getting a fresh, clean air supply.
Probably the best stock location that I have noticed is on the T-rex by Kawasaki-between the seats up high.

The aftermarket 'high flow' filters are NOT doing an adequate job of delivering clean air. (One Yamaha had an end gap of over 5/8" inch on the piston rings due to the ground out cylinder bore!)

The best aftermarket intake that I have seen and installed is called an S&S Intake, it was for a Polaris RzR 800. It is a snorkel type that relocates the "pod" filter to between the seats in its own air box, and includes a foam pre-filter on the inlet that is rear-facing. (I located this intake after doing a major top-end overhaul due to the K&N filter box allowing the motor to get 'dusted' ruining 2 valve seats, and the Nikasil in the bores.) We can obtain and install this intake system for you if an air intake mod is a must.

The first stages of power improvement, in my opinion, come from a aftermarket exhaust, and a clutch spring/weight change-It really wakes up most of the manufactures' side-x-sides.

Feel free to call for more info.....

KaN Powersports
(801)686-4556

See you on the Snow, Dirt, or Sand we love it all.......

2008-2010 Polaris problems

2012-11-24T21:26:00.001-07:00

As many of you already know there have been some known engine issues with the dragon 800 from 2008-2010. In 2008 they released the all new 800 as a single ring piston in a mono-block. There were premature failures right off the bat! in 2009 we saw 2 piston rings, still failures! In 2010 a different top-half to the case and thicker skirts on the mono-block. Better, but not there yet! So like the 05-06 900's back to the drawing board for the2011!
Where does that leave all of us?
With the bitter taste in our mouth that Polaris does not care about their consumer.

I have seen a lot of independent efforts to try to make this engine right (It really is a good powerhouse when it runs). I absolutely do NOT agree with the one independent kit out there that requires you to put a steel girdle under your cylinders and run a taller forged piston! If a flexing case were the problem, the 900 would have reviled these same traits years earlier, for their case was very similar to the following 800, but they had two cylinders on top, and narrower crank bearings. (Candidates for even more flex).

There is hope, however, to this amazing power plant! After a lot of research, we here an KaN Powersports have an answer!! The truth of the matter is that the problem stems from an engineering error associated with the engine's installation, not the engineering of the engine itself. As it turns out I always Q&A customers about what happened a the point of failure. This is when I started to notice the trend-"It ran great all day. I shut it off for lunch. After a soda break, or lunch break I started the sled and it blew".

Come to find out, you shut the machine off and the engine continues to climb in heat for a bit (this happens in all engines), however the tunnel cooler loaded with snow immediately cools off (heat seeks cold). When you start the sled this cold rush of water enters the water jackets! The thin walled mono-block contracts right down onto the piston and there it is!! Seizure on an engine that was just running fine 20 minutes ago.

We do have a solution for this problem! I want to be clear, the part is patented by someone else. (I wasn't fast enough) But if you give us a call, we can obtain the part and take care of the install for you. The plus side is this mod/repair is less than $500.00.

Let us know if we can help out-(801)686-4556

KaN Powersports
2108 s 1100 w West Haven (Ogden)

Well There Is Always YouTube

2012-11-21T12:13:00.002-07:00

What do you do when you have the itch to go ride but something happens that makes it impossible?

Last week I really wanted to get out on the snowmobile. The only problem is there isn't enough snow. So naturally I turned my attention to YouTube and watched other people snowmobile.

This really doesn't solve my dilemma. As a matter of fact it makes it worse. It makes me want to go and try what I just watched, but it is still better than nothing.

I love all the YouTube content for power sports. With the advent of POV cameras the content is growing every day. There are even full length hour+ long videos on there. As a matter of fact, I spent my spare time yesterday watching one from SledNecks 13. Here it is bellow if you are interested.

Thanks for reading,
DPS

A Little about us post...

2012-11-20T19:59:00.001-07:00

HI all, Thought we would take a minute and introduce ourselves; My wife and I saw the need for a much needed "Ma & Pop" style shop in the powersports industry. We are a powersports machine, and repair shop located in Ogden Utah. We perform all repairs in house (except Nikasil). We Bore or re-sleeve cylinders, build and true cranks, port two and four stroke engines, and do performance mods to all degrees. Our many accounts allow us to offer you most of the OEM and aftermarket parts and accessories available out there. We can handle anything from simple services to major in house overhauls!

I am a firm believer that there does not need to be a "Black Magic" based around your rebuild, tune-up, or mods. I not only take the time to tell you what I am doing, I explain why. Furthermore, In the near future I plan on making some tutorial style videos of some of our in shop operations and posting them here. Many other shops try to guard this info, it is my firm opinion this behavior is to guard in-competencies that may be present around a given topic. The reality of this is that much of the processes involved are simple but time consuming, and the correct tooling is not feasible for the 'do-it-yourself-er'. So if you have the ability and tooling to do it, I support you and hope I can offer assistance. From an engineering standpoint many given subjects around an engine are derived by targeting, planing and mathematical problem solving. In reality it is not that much different for performing many of the given modifications that can be made to these finicky little engines.........

SEE YOU ON THE SNOW, DIRT, or SAND-We love it all!!

KaN Powersports LLC
(801)686-4556

We made it

2012-11-20T13:17:00.004-07:00

K a N Powersports would like to thank DPS for inviting our company to join. We will be posting soon. Thanks again DPS.....

The Holliday Season

2012-11-20T11:25:00.000-07:00

I am sorry I haven't written in a while. Things get busy this time of year. However it is also a good time of year to think about some piece of equipment that you would like to have, or some upgrade you would like. For my brother this is a new 2013 Polaris RMK Pro. For me it is a bit more modest, maybe new gloves or even a carbon fiber helmet. Actually check that, I already got my Christmas present. It was the Contour GPS helmet camera. I guess I can stop thinking about me, and start thinking of others now. After all that is what the season is all about isn't it? Just wanted to check in with all my readers and let them know that I am still alive even though I haven't posted in a while. Good news though... KAN Power Sports accepted the invitation to write on the blog, so hopefully we will see something from them soon. Keep your fingers crossed. Thanks for Reading, DPS