Dishing Tech

New Xiaopan Forum

2012-05-22T00:31:00.000+10:00

I decided to buy a domain xiaopan.co and created a community user forum. Be great if you can signup, contribute, help yourself, help each other and ask questions. Signing up is easy, you can even signup through Facebook.

This essentially is the official forum so it would be good to get everyone in the same place. Xiaopan related questions and comments will be directed to this forum. Got heaps of cool downloads also :)

The Forum

My Favourite Reaver & Aircrack Script

2012-05-17T06:42:00.002+10:00

Before I start with Reaver or aircrack-ng it is good to use the following commands. First I spoof my mac address, then I ensure that my device is not in use and change my TX power to my device using the CRDA regulatory domain code BO for Bolivia (Country List). Then I make sure injection is working, if it is not I make sure it is.

# Change Mac Address
sudo airmon-ng stop wlan0
sudo iwconfig wlan0
sudo ifconfig wlan0 down
sudo macchanger --mac 00:11:22:33:44:55 wlan0
sudo ifconfig wlan0

#Device Busy
sudo iwconfig wlan0
sudo ifconfig wlan0 down
sudo iwconfig wlan0 mode monitor
sudo ifconfig wlan0 up
sudo iwconfig wlan0
sudo airodump-ng wlan0
sleep 30

dmesg| tail -20
sudo rmmod rtl8187
sudo rfkill block all
sudo rfkill unblock all
sudo modprobe rtl8187
sudo rfkill unblock all
sudo ifconfig wlan0 up
sudo airmon-ng start wlan0
sudo airmon-ng
sudo airodump-ng mon0
sudo ifconfig wlan0 down
sudo iwconfig wlan0 mode monitor
sudo ifconfig wlan0 up
sudo iwconfig wlan0
sudo aireplay-ng -9 wlan0

#Change Txpower
iw reg set BO
iwconfig wlan0 txpower 30dbm

#Test Injection
sudo aireplay-ng -9 wlan0

Change TX Power in BackTrack 5 R2 | DishingTech Edition

2012-05-17T06:23:00.000+10:00

A higher dbm value with your card should result in faster and higher percentage of successful results.

You can change the tx power using the following commands.

sudo iwconfig (find out where your card is, in this case wlan1)

iw reg set BO

iwconfig wlan1 txpower 30dbm

This card is rated more than 30dbm!

Now it is :)

If you get the following error code:

Error for wireless request "Set Tx Power" (8B26) :
SET failed on device wlan1 ; Invalid argument.

Make sure you update BackTrack and compat-wireless

takka360 on Ubuntu Forums stated a workaround where you can find a Bolivia (BO) proxy from Hidemyass using the Firefox browser. Disconnect from WICD. Then go to edit preferences > advanced > network > settings and manual proxy. Also add the required port number. Now go to WICD and connect using the new proxy.

Check out CRDA and other regulatory domain codes (Country List). New Zealand (NZ) and are few others are also rated @ 30dbm.

Downloads

2012-05-17T05:53:00.000+10:00

Beini-1.2.5_DishingTech.iso

63.04 MB

2012-05-14 01:17:06

380

Desktop_1900p.jpg

904.66 kB

2012-05-01 03:46:49

DishingTech_R36-1.3.0.0.img

5.62 MB

2012-05-13 19:08:42

feedingbottle3.2.3.deb

1.22 MB

2012-05-01 16:50:23

inflator1.0-backtrack5r1-gnome-bit32.deb

787.99 kB

2012-05-01 16:42:41

465

iPhone_3G.jpg

210.02 kB

2012-05-01 03:46:49

iPhone_4S___4.jpg

312.57 kB

2012-05-01 03:46:49

iwepBTDic2005.deb

46.13 MB

2012-05-01 16:02:56

259

iwepBTDic2006.deb

46.13 MB

2012-05-01 16:02:58

110

iwepBTDic2007.deb

46.12 MB

2012-05-01 16:03:00

115

iwepBTDic2008.deb

46.13 MB

2012-05-01 16:03:01

iwepBTDic2009.deb

46.13 MB

2012-05-01 16:03:03

116

iwepSTDic2005.deb

52.26 MB

2012-05-01 16:03:05

162

iwepSTDic2006.deb

52.28 MB

2012-05-01 16:03:07

103

iwepSTDic2007.deb

52.28 MB

2012-05-01 16:03:09

100

iwepSTDic2008.deb

52.28 MB

2012-05-01 16:03:10

101

iwepSTDic2009.deb

52.29 MB

2012-05-01 16:03:10

105

iwepSTDic2010.deb

52.27 MB

2012-05-01 16:18:56

118

iwepSTDic2011.deb

59.17 MB

2012-05-01 16:18:56

211

iWep_Pro_4.1.3.deb

432.46 kB

2012-05-01 03:46:49

329

iWifiHack.zip

787.61 kB

2012-05-01 03:46:49

Macchanger-GTK.sh

263.00 B

2012-05-05 13:25:35

macchanger-gtk_1.1-4_all.deb

8.10 kB

2012-05-05 12:55:25

minidwep-gtk-30419-ubuntu-32bit.deb

199.70 kB

2012-05-01 16:50:23

323

Reaver_1.2.4.rar

44.58 MB

2012-05-01 03:23:43

907

Reaver_Inflator_1.4_r113_(latest).zip

1.07 MB

2012-05-12 08:54:07

RTL8187b_Drivers.zip

40.91 kB

2012-05-01 04:15:49

stKeys2-GUI.exe

1.23 MB

2012-05-05 21:15:03

Windows_3.11.pvm.zip

16.95 MB

2012-05-01 04:25:36

140

wpscrackgui_1.1.7-1_airubuntu.deb

242.36 kB

2012-05-03 12:46:46

172

Xiaopan.iso

69.56 MB

2012-05-08 20:07:38

180

XiaoPan.pvm.rar

69.11 MB

2012-05-08 20:32:03

157

xiaopanOS-0.4.2.1.iso

75.71 MB

2012-05-10 08:01:23

117

xiaopanOS-0.4.2.iso

75.58 MB

2012-05-09 23:38:18

XiaoPan_0.4.2.2_(English).iso

75.00 MB

2012-05-10 19:50:27

674

How to Crack WPA / WPA2 with Xiaopan OS & Beini Using a Dictionary Attack

2012-05-15T08:06:00.002+10:00

1. Copy your iso image to backup
2. Open the copied iso image using UltraISO
3. Download (hexadecimal dictionary) or create a dictionary file word list
4. Put a .dic file in the tce or cde folder
5. Save the iso
6. Make a live USB or create a new virtual machine with your newly updated Xiaopan OS (Best) or Beini iso
7. Start XiaopanOS or Beini
8. Open minidwep-gtk
9. In the encryption box it is set to WEP by default, we want wash to pick up WPA / WPA2 only
10. Click Scan
11. After scan is completed select one network
12. Click launch
13. You need minidwep to capture the 4 way "WPA Handshake" When it does:
14. Click Dictionary Attack and navigate to the dic file you imported (in sr0)

Will make a video shortly, stay tuned :)

Notes:
• Adding a dictionary file will increase the size of your ISO significantly
• There is no guarantee that this will work due to the many combinations of passwords
• This could take an extremely long time
• You need to be close to the AP
• Might be a good idea to run minidwep in rootshell so you see any potential error message
• Best to use a compatible aircrack-ng card capable of injection
• Click here for more information

Beini 1.2.5 Latest & Final Version Release

2012-05-14T05:50:00.001+10:00

It is very important you read the following information before downloading. Download link at the bottom of this page.

• Built from Beini 1.2.2
• Updated Firmware.tcz
• Updated RTL8187L driver
• Added BCM43XX-3.0.21.tcz driver
• Updated compat wireless 2012-04-23
• Updated minidwep-gtk-30419.tcz (thanks to djyuzi, XiaopanOS and anywlan.com)
• Added reaver-r113.tcz
• Added support for Realtek 8712, 8188, 8191SU,8188C, 8192C, 8192D
• Upgraded feedingbottle to 3.2.3
• Upgraded Xorg to 7.6
• Added Inflator (Reaver GUI)
• Upgraded WPA_supplicant.tcz

See full changelog here

Notes
• Users of RTL8188RU devices should not use this build unless they blacklist conflicting drivers at boot. Please use Beini 1.2.3 or 1.2.4 | Reaver Edition instead.

• Minidwep must be launched from the RootShell. Type minidwep-gtk (enter) to launch it. ~~Same goes for Feeding Bottle, although I do not know what the command is. Anyone knows or figures it out, let me know.~~ Bob figured it out below, be sure to thank Bob by liking his comment or ask him more questions.

• To launch Feeding Bottle use sudo "gksu /bin/feedingbottle/feedingbottle" which is located in /bin/feedingbottle/feedingbottle which you can access through Xfe file manager.

• As always, if it does not work try another version.

• This will be the final version. Development ceases with 1.2.5. Use XiaopanOS from now on.

Screenshots

New Minidwep must be launched from RootShell

Inflator working with monitor mode with RTL8187L device

You can add and perform a dictionary wordlist attack for WPA / WPA2 networks. You can also run Reaver from this version.

Download Beini 1.2.5

Beini Changelogs

2012-05-13T22:45:00.001+10:00

Here is the changelogs for Beini.

People who do not have an Realtek 8188RU should only use Beini 1.2.5 or 1.2.2 and lower.

Unless they modify Beini 1.2.3 or 1.2.4 with UltraISO and delete x_rtl8188ru_20110812.tce and add x_ath9k_htc_compat-wireless-2.6.38-rc4-1.tce and firmware.tcz from Beini 1.2.2.

2012-05-15 Beini 1.2.5

Built from Beini 1.2.2

• Updated Firmware.tcz
• Updated RTL8187L driver
• Added BCM43XX-3.0.21.tcz driver
• Updated compat wireless 2012-04-23
• Updated minidwep-gtk-30419.tcz (thanks to djyuzi, XiaopanOS and anywlan.com)
• Added reaver-r113.tcz
• Added support for Realtek 8712, 8188, 8191SU,8188C, 8192C, 8192D
• Upgraded feedingbottle to 3.2.3
• Upgraded Xorg to 7.6
• Added Inflator (Reaver GUI)
• Upgraded WPA_supplicant.tcz

Notes
• Users of RTL8188RU devices should not use this build unless they blacklist conflicting drivers at boot. Please use Beini 1.2.3 or 1.2.4 | Reaver Edition instead.
• Minidwep must be launched from the RootShell. Type minidwep-gtk (enter) to launch it.
• This will be the final version. Development ceases with 1.2.5. Use XiaopanOS from now on.

2012-04-22 Beini 1.2.4
Built from Beini 1.2.3

• Added Reaver: Command line application to brute force hack WPS encrypted WPA / WPA2 pins.

2011-08-14 Beini-1.2.3
• Updated FeedingBottle to 3.2.1: fixed the bug that can not run the program using right click menu on desktop.
• Added "x_rtl8188ru_20110812.tce", include Realtek8188RU's drivers and firmware, support Realtek8188RU.
• Deleted "x_ath9k_htc_compat-wireless-2.6.38-rc4-1.tce" and "firmware.tcz"

This version build for Realtek8188RU chipset especially, non-users of these chips are not recommended. When no client, please use "Fake Auth(by force)", not common "Fake Auth(-1)".

2011-02-27 Beini-1.2.2
• Updated Aircrack-ng to 1.1r1859
• Updated FeedingBottle to 3.2: generate *.wkp file directly when get handshake packets (EWSA3.x project file)
• Added driver x_ath9k_htc_compat-wireless-2.6.38-rc4-1.tce:AR9271 chips supported
• Added firmware.tcz:updated RT3070 firmware and more
• File Manager:Removed ROX-Filer (libglade.tczl,libxml2.tczl,rox-filer_root.tcz,shared-mime-info.tcz),Added Xfe(xfe.tcz,xfe-locale.tcz,fox.tcz,Xorg-7.5-lib.tcz)

2010-06-04 Beini-1.2.1
• This version come with software programs from Beini-1.2
• Wireless network card driver updated:fixed the compatibility problem of RT3070 driver(LED worked normal)
• Fireware updated:wireless-fw-2010-06-04.tce,Non-independent software package

2010-06-02 Beini-1.2
This version come with software programs from Beini-1.1

• Updated Linux kernel to 2.6.34
• Wireless netword card driver updated:RT3070 and parts of Broadcom chips supported
• Firmware updated:wireless-fw-2010-05-27.tce,Non-independent software package

For RTL8187 chip,this version support RTL8187L with IEEE80211 driver,not for RTL8187B; non-RT3070 and Broadcom chips user remain Beini-1.1

2010-05-20 Beini-1.1
• This version basis on the kernel and driver of Beini-1.0-RC5.2
• Default open FTP service(username:tc,password:(Null),default /home/tc directory;username:beini,password:(Null),default /tmp directory,where temp data of minidwep and FeedingBottle store),service provided by vsftpd program.
• Updated Aircrack-ng to 1.1
• Added airgraph-ng support,added interrelated software:psyco-1.6.tcz,graphviz.tcz,libgd.tcz
• Added airdrop-ng support,added interrelated utility:python
• Added python interrelated software:python.tcz,bzip2-lib.tcz,sqlite3.tcz,tcl_tk.tcz,pylorcon.tcz
• Added dictionary fcicq-dict-unidict-20100410.tce made by fcicq
• Firmware updated:wireless-fw-2010-05-03.tce
• Thanks NaiBa(China) for providing new wallpapers,his blog:http://blog.163.com/bang37480115@126
• Updated minidwep-gtk to minidwep-gtk-20510
• Updated FeedingBottle to 3.1:added advanced GUI for WPA mode;added OPN mode support;for legitimate client analyzing,capture packet for 6 seconds
after getting WPA handshake packet in order to detect whether there is a Deauthentication Packet
• Added a new logout program:logout.tcz,for shutdown and reboot's convenience

2010-02-12 Beini-1.0-Final
• Updated minileaf's auto test script:minidwep-gtk-20208-original.tce
• Updated FeedingBottle to 3.0 Final:optimized code and fixed some bug
• Pack the network card driver into tinycore.gz,fixed the problem that unsupport Broadcom chips by RC version
• Updated Linux kernel to 2.6.32.2,enhance system compatibility
• Added Bib 1.0,a software like Network Stumbler in Beini
• Updated iw to 0.9.19

2010-01-22 Beini-1.0-RC5.2
• Updated minileaf's auto test script:minidwep-gtk-20119.tce
• Updated FeedingBottle to 3.0 RC3:added force fake authentication function--try this when fake authentication(aireplay-ng -1) fail;display the schedule of buliding XOR file when using chopchop(-4) attack;changed the cursor's color of "Attack Command";added "Ignore The Error Item of AP" option in get AP list interface(ex.:133CH);changed the font of AP/Client list to monospaced font

• Improved aireplay-ng code,added chinese SSID fake authentication support(aireplay-ng -1)
• Updated iw to 0.9.18
• Added cowpatty.tcz(Ver:4.6),for WPA/WPA2 hankshake packet cracking
• Added tcpdump.tcz,wpa_supplicant.tcz,wl.tcz
• Firmware updated:wireless-fw-2010-01-05.tcz,added iwlwifi-6000
• Driver updated:compat-wireless-2.6.32.2-2010-01-05.tcz,ZD1211 can display PWR value normally;support some more chips of Broadcom
• This version is the last beta one for Beini-1.0-Final

2009-12-24 Beini-1.0-RC5.1
• Updated minileaf's auto test script:minidwep-gtk-1223.tce with GUI
• Updated FeedingBottle to 3.0 RC2:more compatible,support bt3-final,auto close aircrack-ng when FeedingBottle exits,default AP scanning time changed from 15s to 30s,display error information when fail to get AP list
• Default screen resolution:1024*768(24)
• Added 12,13,14 channels support for Beini
• Added libpci.tczl,pci-utils.tcz for lspci commond support and checking the information of PCI network cark
• Driver updated:compat-wireless-2.6.32.2
• Driver added:RT3070USB (RT307x)2009-11-10 (beta)
• Changed the wallpaper made by CaiJing (HanDan, China)

2009-11-30 Beini-1.0-RC5
• Updated minileaf's auto test script: minidwep-wpa-1129.tce, which supports WPA/WPA2

• Updated FeedingBottle to 3.0 RC1:
1. Added an advanced GUI,as a command bulider,auto create command for Aircrack-ng and get the output information(1,WEP only;2,support command modify;3.Autorun button for aotu execute the default command which is built)

2. Display detailed information when scanning AP;AP scanning time options:5s/15s/30s/1m/5m/15m

• Added rox-filer_root.tcz,ROX-Filer is a tiny file manager with GUI,which can be used for managing the hankshake packet of WPA/WPA2 or password dictionary (Size 8MB,run as root,please use carefully)
• Added flit.tcz for display system time and power supply mode
• Added mdk3-v6.tcz,a famous wireless security testing utility--MDK3
• Driver updated:compat-wireless-2009-11-30
• Firmware updated:wireless-fw-2009-11-27.tce,added Broadcom network card driver
• Changed the file format of most software to tcz

2009-11-15 Beini-1.0-RC4.2
• Updated Tiny Core Linux to 2.5

• Updated FeedingBottle to 2.0 RC2.1:more compatible,added aterm for supporting bt4-pre-final;changed default time of AP scanning from 10s to 15s;changed the color of aterm window;fixed the bug occurred when obtain the XOR file's name of -4/-5 attack;fixed the bug occurred when click the blank area of "APs Information" some odd client information display;added optional 14 channels support;show character of WEP key when it is ASCII;Updated GUI;fixed the bug that the client list,which display on "Clients Information" area,can't be clear during AP scanning.
• Added mimayin's crunch.tcz,a console tool of generating password dictionary,improved FeedingBottle's WPA/WPA2 testing function
• Added macchanger-1.5.0.tcz,support modify MAC address
• Driver updated:compat-wireless-2009-11-15
• Changed the file format of some software to tcz

2009-10-30 Beini-1.0-RC4.1
• Updated minileaf's auto test script:minidwep-0.11-1029.tce
• Updated FeedingBottle to 2.0 RC2,added WPA/WPA2 support,providing a simple password.lst;fixed the overflow bug when obtained some odd PWR values
• Driver updated:compat-wireless-2009-10-27
• Changed the file format of some software to tcz
• Added libusb.tczl,usb-utils.tcz for lsusb command support and checking the information of USB network card
• Added kernel boot parameter waitusb=6,fixed the problem that USB version made by unetbootin (custom) can't auto load the software package

2009-10-17 Beini-1.0-RC4
• Updated FeedingBottle to 2.0 RC1,COMPLETELY REWORTE
• Firmware updated:wireless-fw-2009-10-13.tce,added ar9271.fw
• Driver updated:compat-wireless-2009-10-17
• Updated iw to 0.9.17
• Added nano.tcz for text edit

2009-09-23 Beini-1.0-RC3
• Added an auto test script which is made by minileaf:minidwep-0.11-910
• Added NTFS support(read only),more convenient and flexible for hard disk boot of Beini
• Changed CD configuration
• Updated FeedingBottle to 1.0 RC2.1,Added optional AP's scanning time support,improved part of code

2009-09-16 Beini-1.0-RC2
• Updated wireless-fw.tce,added two firmware:isl3887usb,isl3887usb_bare(thanks minileaf(Sichuang Chengdu) for testing work)
• Added bash.tce,dosfstools-3.tce,syslinux.tce,the last two are using for making USB version
• Updated Tiny Core Linux to 2.3.1
• Updated FeedingBottle to 1.0 RC2,added deauth(-0),fakeauth(-1) and interactive(-2) support,improved part of code
• Changed the wallpaper for a softer one

2009-09-14 Beini-1.0-RC1
The first version

Need Help from DishingTech?

2012-05-13T12:31:00.001+10:00

I have been getting heaps of comments which is good. Most of these comments are questions or requests for help rather than thanks or adding on to the article. I have made the following guidelines to help me help you and help you help me.

We are also accepting tutorial requests from readers and are seeking people to write for us.

Guidelines for Commenting, Sharing & Requesting Help
1 Be specific and detailed For example, do not just say "my wireless card says it is not found". State the operating system, hardware and version numbers. Also state what you have done to try to resolve the issue.

2 Use English we welcome other people from other countries to contribute. However, the native language of this blog is english. If you do not know english. Head over to google translate, copy your text and paste it in the comment section.

3 Check Out Other Related Posts They might just have the answer you are looking for.

4 Check Out the Links within the Post They are there for a reason, to help you understand more.

5 Let Me See What You See Add an image so I see what you see, or better yet, upload a screencast or video on YouTube.

6 Follow up if you asked a question and I helped you fix the problem state your success so others know it works and I know it works.

7 Do not copy from Us we appreciate you want to share our articles but we spend time creating original content. Our work is subjected to copyright conditions. Under no circumstances are you allowed to copy word for word our blog. However, you are allowed to share, provided you give us credit If you do and we find out, we will issue you a DMCA notice which may result in your website being taken down.

8 Say Thanks It feels good to be appreciated. DishingTech gets over 3,000 page views a day and only about 3 comments per day. The more we feel we are helping, the more content we can deliver to help you more.

9 Embedding Videos Any videos published by us on YouTube can be embedded in your website. However, under no circumstances are you allowed to rip the movie and publish it on your own website or YouTube account.

10 Sharing If we helped you or feel we can help other groups share our website or articles on Facebook, Twitter, Google+, Pinerest, blogs, forums, news articles wherever. Bookmark Us also :)

11 Finding Stuff To help you find stuff on DishingTech use our Search Box which is located on the top of the right hand pane --> or use this one:

How to Install Reaver Pro

2012-05-13T11:40:00.001+10:00

Reaver Pro comes with a USB thumb drive preloaded with all the software to get you started. It contains a operating system which I suspect is some sort of Linux build and of course all the reaver tools.

You have a few options to install Reaver Pro:

Boot from the Reaver Pro USB

1. Plug in your USB stick

2. Plug in your Reaver Pro receiver

3. Restart or reboot your Windows or Linux computer

4. Access your BIOS settings to change the boot devices and the order in which they boot from. You need to boot to USB first before your hard disk with your native operating system.

• To access your BIOS you generally have to push a function key such as F1 or F2

5. Save your settings then reboot your BIOS

6. After Reaver GUI boots you will be able to plug and play

Run Reaver Pro GUI in Virtual Machine (VM) Environment in your Native Operating System

This enables Reaver Pro to be fully compatible with Mac and Windows. You will need some sort of virtualisation software like Parallels (paid), VMware (paid) or VirtualBox (free). You will also need to copy the files from your Reaver Pro USB and use Plop Boot Manager (plbpt.iso) to create an iso image file which you can boot into.

The downside of running a VM is that your system resources will be shared between your native OS, Reaver OS and the VM software you are running. This is the only option on a Mac because they have EFI boot. Do not bother trying to boot Reaver via USB.

Best 3G WiFi Hotspot Maker, Router & Extender | Alfa R36

2012-05-13T07:06:00.000+10:00

This device essentially creates personal WiFi hotspots (just like a pocket WiFi or MiFi would). All you have to do is plug in the USB device and you will have WiFi to share. While not the most mobile of devices. It has a whopping 27dbm power output which surely means it is one of the longest (if not thee longest) WiFi hotspot creators and WiFi extenders out there.

Now it is made even better. Alfa has just released R36-v1.2.0.8 firmware for the R36 Wireless Network Range Extender and Router for 3G USB dongles, WLAN and other network USB devices.

This will allow you not just to connect to a AWUS036H device but also to AWUS036NHR / AWUS036NH devices. I asked Alfa a few months ago if the AWUS036NHR was compatible, they said 'NO'. And now it is. This is great news because now I don't need to plug in my AWUS036NHR into my laptop anymore!

Cheapest place to look if you want one of these babies would be ebay, Amazon, Alfa Europe or rokland but do shop around.

Latest

Other versions

Alfa's FTP server ftp://downloader:Alfa0000@61.221.104.183 is down and ftp://61.221.104.183/Download/Firmware is up.

R36 PDF Manual

Firmware migration guide

Notes

• Any interruption during firmware migration might damage your unit permanently.

• Please load factory default after firmware migration is completed, cause we need to make sure that firmware is written into R36.

• Alfa is revising the firmware, you can send an email to sales@alfa.om.tw if you have DNS issues with AWUS036NH on the R36.

• If you upgrade the firmware 1.2.0.8 and above you cannot use AWUS036H with the R36. But you will be able to use the AWUS036NH and AWUS036NHR. Also Alfa devices with the same chipsets (RTL8188RU / RT3070) as the models above e.g. Alfa outdoor models should also work also Wifisky 3w, 2w, Wifi-unlocker models should also work.

Features | Could you call it a modem?

Processor: Ralink RT3050F @ 320Mhz

Flash: MXIC MX29LV640EBTI-70G

RAM: EtronTech EM63A165TS-6G

One USB port

One Serial Port @ 115200bps

One WAN

One LAN

Wired: IEEE 802.3 (10Base-T) IEEE 802.3u (100Base-TX) Wireless: IEEE 802.11, IEEE 802.11g, IEEE 802.11n
Physical	1 x 10/100Mbps WAN Port 1 x 10/100Mbps LAN Port 1 x detachable external 5dBi antenna 1 x Reset button 1 x WPS Security Key 1 x USB Port
Management	Web-base management interface Remote management SNTP time synchronize
Output Power	802.11b: 27dBm ± 2dBm 802.11g: 25dBm ± 2dBm 802.11n: 25dBm ± 2dBm
Sensitivity	11n	20MHz	MCS7: -71 MCS0: -90
		40MHz	MCS7: -69 MCS0: -88
	11g	54Mbps: -75 6Mbps: -92
	11b	11Mbps: -90 1Mbps: -95
Data Rate	802.11n ( 40MHz ): up to 150Mbps 802.11n ( 20MHz ): up to 72Mbps 802.11g: 54,48,36,24,18,12,9,6Mbps 802.11b: 11,5.5,2,1Mbps
Wireless Mode	WISP Bridge Router
Operating Frequency	FCC: 2412~2462MHz (Ch1~Ch11) ETSI: 2412~2472MHz (Ch1~Ch13) Japan: 2412~2484MHz (Ch1~Ch14)
Security	Access Control Policy MAC filter DMZ Host SSID Broadcast disable Wireless MAC address Filtering WEP Encryption WPA-/W PA2-PSK (Pre-shared Key) WPA/W PA2 Enterprise mode (802.1x) WiFi Protected Setup (WPS)
Router	Shares high speed cable/xDSL Internet connection Static Routing VPN Pass through NAT 802.11e WMM IGMP Proxy Dual SSIDs
Temperature	Operating: 0ºC to 40ºC (32ºF to 104ºF) Storage: -20ºC to 60ºC (-4ºF to 140ºF)
Humidity	Operating :10% to 85% Non-Condensing Storage: 5% to 90% Non-Condensing
Dimensions	93 x 70 x 26mm
Weight	74g
Power Input	12V/1A
3G Functions	3G budget Control with Email warning ( Support Pre-pay and Post-pay ) Dual Wan backup Remote Access Control by 3G WAN

Alfa R36 Compatibility Device List

ALFA Onyx3G
ALFA Fly3G
ALFA AWUS036H
ALFA AWUS036NHR
ALFA WUS036NH

Huawei E220
Huawei E169 / 169G / 169U
Huawei E219
Huawei D02
Huawei D21
Huawei D22
Huawei D23
Huawei D31
Huawei ET128
Huawei D12HW
Huawei D12LC
Huawei D21LC
Huawei E1762
Huawei E1552
Huawei E1782
Huawei E1552
Huawei E1782
Huawei E156G
Huawei E177
Huawei E353
Asus T500
SonyEricsson MD300
Qisda H21(single)
ZTE MF626
ZTE MF627
ZTE MF628
ZTE AC2726
ZTE MF636
ZTE MF637
ZTE AC2736
ZTE MF631
ZTE MF180
PROLINK PHS100
PROLINK PHS300
PROLINK PHS101
DoCoMo A2502
SoftBank C01LC
Sierra 598U
C-MOTECH U300
Qisda H21(dual)
EpiValley 8089
i-mobile U3300
BandLuxe C180
Option Icon 225
Dlink DWM-156
NOKIA CS-15
Royaltek Q110
CSL U1-TF