With each and every extra box of product that you bring into your store for sale, you increase the amount of trash that will be going out and the weight of the dumpster that will have to be pushed into a position to be emptied.  If you don’t have the proper equipment, like a dumpster mover, to move those full and heavy dumpsters you could be decreasing the time that your employees have to stock shelves and help customers and what’s even worse you could be putting them at risk of injury.

A full dumpster could top out at several hundred or maybe even several thousand pounds depending upon what it is filled with,  which could be far too much for an employee to handle pushing or pulling manually but with the help of a dumpster mover a waste container loaded up to 5000 lbs poses no problem at all.  The dumpster mover from DJ Products can easily allow a single employee to quickly and easily mover a waste container of anywhere from 500 up to 10,000 pounds over rough terrain and in tight quarters with no problems at all.  With a dumpster mover, your employees can get that heavy dumpster where it needs in time for pick up and then quickly back to where you store it to be filled again in a much shorter time and none of the strain that would have resulted from a manual move.

The best way to increase efficiency and to be able to fill orders at a faster pace is to have a good crew of properly trained employees and the best possible equipment to perform the work.  Upgrading to high quality equipment like the powered truck from DJ Products can help to cut down on the time it takes to fill each order and to load trucks for shipment which will ultimately mean that you can fill more orders per shift and keep even the pickiest customers satisfied with your service.

The powered truck from DJ Products is smaller and much more maneuverable than bulkier, propane operated forklifts and there is no need to stop mid-shift or mid-order to replace an empty fuel tank.  The powered truck from DJ Products is battery operated and it can go strong for an entire shift on a single charge so employees can get important orders filled as needed without worrying about equipment failure.

If you’ve got any competition at all, you need to keep your customers satisfied in order to survive during tough economic times.  In order to satisfy customers you need to keep up with their demands and you can do that with the right crew and the right equipment, like the powered truck from DJ Products.
�

The addition of a powered cart makes moving heavy boxes, materials and supplies from one location to another easy for any employee.  Powered carts from DJ Products are ergonomically designed to prevent many of the injuries commonly associated with manual material handling and the quiet operation of each powered cart keeps employees from being distracted while moving freight from point A to point B.

The powered carts from DJ Products have a large enough platform to carry a sizable load of material, but the frame size is small enough to be easily maneuvered in and out of small aisles or areas of shelving.  The powered cart from DJ Products is battery operated so there is no unnecessary downtime during a busy shift like you might have with a propane operated lift or cart that has run out of fuel – the powerful battery lasts for an entire shift on a single charge so employees can continue working and remain productive for the entire day.

Having reliable, safe and effective equipment helps to eliminate potential staffing issues and allows employers to have complete confidence that there will never be an issue in terms of fulfilling orders and delivering product in a timely manner.
�

In order to increase efficiency and make the environment in a crowded hotel or hospital as safe for employees as possible, it’s important that the staff have the proper equipment to handle their duties.  Food and linen carts can be exceedingly heavy and difficult to maneuver down narrow hallways manually, but with the help of an electric cart pusher the job can be performed much faster and much more efficiently.

An electric cart pusher from DJ Products is designed to attach easily to just about any four wheeled cart with two front swivel casters and two straight casters.  Once attached to the swivel caster end, the electric cart pusher makes for quick and easy maneuvering in and out of small rooms and down narrow halls and corridors.

An electric cart pusher helps to make employees safer by eliminating the stress and strain associated with manual cart pushing.  Alleviating the stress and strain on your employees minimizes sick days; workers compensation claims and keeps you entire operation running more smoothly.  Using an electric cart pusher can also help to keep guests or residents as safe as possible by minimizing the time that rooms and hallways are either partially blocked or completely inaccessible by slow moving, manually pulled linen or food carts.

A shopping cart retriever can make this part of a retail job much less strenuous on the employees responsible for gathering the carts.  Manual cart retrieval only allows for gathering a few carts at a time if an employee wants to avoid potential injury, but the use of a shopping cart retriever allows for safe moving of dozens of carts at a time.  Being able to perform more work while reducing the potential for injury is a huge benefit for any industry and that’s exactly what a shopping cart retriever can do for a high volume retailer.

Using a shopping cart retriever will also dramatically cut down on the time that it takes for an individual to gather carts from all over the property, which will free up their time to help other associates and perform other duties.  An extra set of available hands is always welcome in a retail establishment, especially during busier times when shelves need to be stocked and customers may need assistance.

Success in the retail industry requires satisfying the customers and creating return business – in order to do that retailers need to increase their efficiency by any means possible.  With the state of the economy, hiring more hourly individuals to help serve customers may not be an option, but any retailer can free up employee time by using high quality and reliable equipment like a shopping cart retriever.

DJ Products makes a vehicle pusher for just about every situation, in the assembly line, on the sale lot and the in mechanics’ shop.  DJ Products has a vehicle pusher specifically designed to wheel heavy trailers around a dealership, crowded lot or down the assembly line that will greatly lessens the chances of accidents and injuries.  The trailer pusher allows a single employee to easily handle a camper, RV, boat or just about any other towable piece of equipment weighing thousands of pounds without any undue stress or strain and without any hassle.

An automobile dealership couldn’t succeed if they didn’t have their cars and trucks kept in prime conditions.  DJ Products has vehicle pushers that can handle everything from the smallest compacts to the biggest pick-ups and each vehicle pusher from DJ Products is ergonomically designed for the safest and simplest operation possible.  This equipment can help dealerships keep their lots stocked to full capacity without worrying about any damage to the cars and trucks as they are being moved.

Any damage to a car, truck or camper decreases its value so manufacturers and dealers must make every effort to keep their automobiles in the best possible condition from the beginning of assembly through to their placement on the lot.  The easiest way to prevent possible damage while moving an automobile is with the use of a high quality and properly designed vehicle pusher.

Moving products and gear that are that heavy requires a distribution center or factory to have the right equipment tug for the job.  Attempting to manually move a piece of equipment or cart that large, even if there were several employees assisting in the move, would most certainly result in injury or possibly damage to surrounding property.  DJ Products makes a rugged and easy to use equipment tug that can easily handle moving wheeled equipment and carts of anywhere from ten to fifty thousand pounds.

The equipment tug from DJ has three 12 volt batteries and is designed to last for a full sixteen hours of continuous operation before needing a recharge – this will get your employees through those long jobs where some overtime is required or through two full eight hour shifts without having to stop.  This reliability puts the DJ Products equipment tug well ahead of what you would get from propane powered tugs.

Though this particular equipment tug looks small by standards, there is absolutely no lack in power – this unit was designed to have every bit of power that a larger bulkier tug would have but packed it into a sleek frame that allows employees to maneuver easily in cramped quarters.  The fact that this tug is so easy to maneuver means that your employees are less likely to be involved in accidents and that everyone in the plant is safer when the tug is in operation.

Any time you can add a piece of equipment to your arsenal that is easier and safer to operate and more reliable than what your crew is currently operating with, you give your staff a better chance to complete jobs on time and to ultimately satisfy your customers.

Electric movers, like the PartsCaddy from DJ Products, allow any member of your staff to move large numbers of parts or heavy cases of material quickly and easily without any undue stress or strain.  Electric movers can increase overall employee efficiency by cutting down on the total number of trips it would have taken to receive a shipment or pull an order if the work were being done manually.  With an electric mover an employee can move several boxes or pieces of material at once without any fear of injury.

The compact design of the electric movers from DJ Products makes them more convenient than traditional forklifts and reach trucks as well.  They are much easier to maneuver, especially in narrow aisles and in tight quarters and are quite a bit easier to learn how to operate.  Electric movers like the PartsCaddy can make difficult turns and squeeze down aisles that it would have been dangerous or impossible to navigate with larger pieces of equipment.

Your employees will also get the added benefit of reliability with electric movers like the PartsCaddy, these units can easily operate at full power for an entire shift on a single charge.  Battery powered carts will also save your company money on operation and maintenance costs when compared to propane powered material handling equipment.  Electric movers help to keep all of your employees safe while broadening the scope of the work that they can safely perform and you get the benefit of spending less money at the same time as you increase your efficiency – by adding an electric mover to your arsenal of material handling equipment, everybody wins.

A Power Pusher form DJ Products can handle a wheeled cart loaded with up to fifty thousand pounds of product and is easy enough to operate that a single employee is capable of handling the job.  The compact design of the Power Pusher lets employees navigate large loads around tight quarters with much less of a chance of an accident than older styled bulky powered movers and the sealed battery power supply means both lower operating and lower maintenance costs.

If your employees are attempting to lug and push around carts that weigh ten, twenty or even fifty thousand pounds manually, they are putting themselves at serious risk for an injury.  More employee injuries results in staffing shortages and ultimately costs your business plenty of money.  The Power Pusher from DJ Products not only makes the job of moving heavy carts much easier, each Power Pusher is ergonomically designed to help prevent many of the nagging injuries that are often associated with warehousing and material handling.

Even the best and most experienced employees will struggle to safely and efficiently complete a job if they don’t have access to reliable and properly designed equipment.  DJ Products has become synonymous with providing safe reliable and effective equipment for all material handling needs and the Power Pusher is one of the most versatile pieces of equipment we make.

The main problem for making these jobs easier lies in the fact that many hospitals, rehab centers and nursing homes have small rooms, narrow hallways and tight quarters in which to operate in general – so trying to move a big and bulky piece of machinery to help you with your duties would be all but impossible.

Thankfully, the Electric Tugger from DJ Products is designed specifically for operation in the narrowest of hallways and tightest of quarters so employees can handle these carts at their heaviest without the fear of strain.  The Electric Tugger is also ergonomically designed to keep overuse injuries at a minimum and to cut down on potential sick days and workman’s compensation claims.

An Electric Tugger can also dramatically increase the speed at which hospital and nursing home employees perform these duties.  Patients and residents can receive their food and have their rooms cleaned faster and this means that rooms and hallways will be clear of clutter for more of the day.  Clear rooms and hallways are a necessity in these types of facilities to ensure that emergency personnel have the room to operate if necessary.

An Electric Tugger cuts down on the chance of over exertion and lets any employee move fully loaded carts quickly, easily and helps to keep residents safe by allowing the staff to keep rooms and hallways clear.  These jobs have been done without the help of equipment for years, but now that there is an Electric Tugger that can help get the job done more safely and efficiently, more and more facilities are attacking these necessary duties the smart way rather than the hard way.