dm-8000-hd-pvr

New Business/Home GSM Alarm System

2016-03-09T23:58:00.002-08:00

New Business/Home GSM Alarm System

Name:New Business/Home GSM Alarm System

Model:YL-007M3B-A

Memo:gsm alarm system, home security alarm, remote control alarm, residential alarm ,water intrusion alarm, two-way intercom alarm

products introduction

This product is the new GSM auto-dial alarm system. It combines two kinds of devices into one model .The system will call 5 users’ numbers + room number and send SMS to the host when it alarming. In addition, you can control the system by your mobile phone anywhere and anytime. This alarm system is widely used for houses，shops, banks，offices, computer rooms, docks，street lamps，garages, warehouses, orchards, factory floors ,etc.

GSM 900/1800/1900 bands , can be used all over the world.
Full duplex communication with the base.
Monitor environment on the spot.
Voice and message alert.
Set alarm ON or OFF by remote controller.
Call in to set alarm ON, OFF , Monitor ,Output.
Send SMS to set alarm ON, OFF , Monitor , Output .
5 group phone + room number.
1 group alarm monitor center phone.
2 group phone to report alarm and non-alarm status.
Can program 7 group alarm messages.
3 zones for wired detector.
16 zones for wireless detector.
Easily set ON or OFF for every wire or wireless detector.
1 relay output to power on camera when alarm.
2 output for home appliances connection (lamp, cooker, air condition).
SMS inform for external power failure or recovery.
Indoor and outdoor alarm controller.

Technical Parameters

Static current:20mA
Power:9V-12V DC
Working temperature:-20℃- +85℃
GSM850/900/1800/1900MHz band
Receiving code: ASK
Frequency:315/433/868/915MHZ
wireless distance: 100 M
wireless detectors:16
wire detectors:3
Size:140*130*35mm

Standard pack components
1 main panel, 1 wireless PIR detector, 1 wireless door sensor,1 siren, 2 remote controllers, 1 GSM antenna, 1 power supply, 1 manual

SUNRAY DM800 HD SE A8P card ALPS M Twin Tuner SUNRAY DM800 hd Pro Alps Tuner REV M SUNRAY DM500 hd Pro satellite Receiver ,wholesale cheap discount price. VU SOLO 2 SE Twin tuner SOLO MINI 3 led screen outdoor led display led display indoor led display transparent led display led display lighting led video wall china led display full color led display led screens flexible led screen rgb led display large led display led curtain led dance floor full color led display out door led display led display manufacturers smd led display led dance floor for sale led display, led curtain, led mesh for stage outdoor led screen advertising led display indoor led displays transparent led screen led mesh led display led screen A8p card SUNRAY SR4 V2 Rev.E jynxbox store
dreambox dm800 hd se v2 alarm security system dreambox dm7080 dreambox dm7080 dreambox dm820 dreambox dm7020 hd v2 cheap wholesale dreambox dm800 hd v2 Sunray SR4 V2 Sunray SR4 800 se Sunray SR4 hd se JynxBox Ultra HD V14 JynxBox Ultra HD V16 JynxBox Ultra HD V15 Dreambox DM7080 HD PVR Dreambox DM820 HD PVR Dreambox DM8000 HD PVR Dreambox DM7020 HD V2 Dreambox DM500 HD V2 SAT PVR Dreambox DM500 HD Dreambox DM800 HD SE with WiFi Dreambox DM800 HD SE Dreambox DM800 HD SE V2 Black Color Dreambox DM800 HD SE V2 White Color Dreambox DM800 HD PVR JynxBox Ultra HD V14 JynxBox Ultra HD V12 JynxBox Ultra HD V10 Sunray4 HD SE A8P Card 3in1 tuner Sunray4 HD SE Sim Card 3in1 tuner

Remote control bike brakes - Cyclelicious

2015-11-24T22:08:00.003-08:00

Remote control bike brakes - Cyclelicious

i like them

jynxbox store

dreambox dm800 hd se v2
alarm security system
dreambox dm7080
dreambox dm7080
dreambox dm820
dreambox dm7020 hd v2
cheap wholesale dreambox dm800 hd v2
Sunray SR4 V2
Sunray SR4 800 se
JynxBox Ultra HD V14
JynxBox Ultra HD V16 JynxBox Ultra HD V15
Dreambox DM7080 HD PVR
Dreambox DM820 HD PVR
Dreambox DM8000 HD PVR
Dreambox DM7020 HD V2
Dreambox DM500 HD V2 SAT PVR
Dreambox DM500 HD
Dreambox DM800 HD SE with WiFi
Dreambox DM800 HD SE
Dreambox DM800 HD SE V2 Black Color
Dreambox DM800 HD SE V2 White Color
Dreambox DM800 HD PVR
JynxBox Ultra HD V14
JynxBox Ultra HD V12
JynxBox Ultra HD V10
Sunray4 HD SE A8P Card 3in1 tuner
Sunray4 HD SE Sim Card 3in1 tuner
Sunray sun800 HD SE Sim Card
Sunray 800 HD SE V2 Sat Receiver
Sunray 800 HD SE Sat Receiver

Sunray800HD SE V2 Cable Receiver
Sunray800 HD SE Cable Receiver

Cloud IBOX 4
Cloud IBOX 3
Vu Solo 2 SE

Remote control bike brakes - Cyclelicious

2015-11-24T22:08:00.001-08:00

GSM Alarm system with Voice and Intercom

2015-10-26T01:53:00.002-07:00

GSM Alarm system with Voice and Intercom YL-007M2C

Name:GSM Alarm system with Voice and Intercom YL-007M2C

Model:YL-007M2C

Memo:

products introduction

Basic Info.

Model NO.:YL-007M2C

Type:Home Alarm

Signal Transmission:Wireless Alarm

Working Mode:Passive

Application:Indoor

Sensor Type:Electric Alarm

Working Principle:Electro-Acoustic Style

Usage:Personal

Certificate:CE, RoHS, FCC

Warranty:2 Years

Series:Wireless GSM Home Burglar Intruder Security Alarm

Dedense Zone:99 Wireless Zone and 7 Wired Zone

GSM Band:GSM 900, 1800, 1900MHz

Export Markets:Global

Additional Info.

Trademark:Wolf guard, OEM, ODM

Packing:Color Box

Standard:CE, RoHS, FCC

Origin:Shenzhen, Guangdong, China

HS Code:8531100000

Production Capacity:10000 PCS/Month

Product Description

Wireless GSM Home Burglar Intruder Security Alarm System (YL-007M2C)

1. Voice guidance for operation (English/French/Spanish)
2.3 GSM wireless band
3.2 way audio
4. Auto arm and disarm
5. Can make calls by onboard keypad

Features:

1.7 wired and 99 wireless defense zones;

2. LCD screen with time clock display;

3.3 groups of timely arm and disarm;

4. Voice prompt for main unit & remote operations;

5. Call 6 phones and send SMS to 3 numbers automatically when alarming;

6.10-second automatic message recording;

7. The main unit can be used as a telephone;

8. Real-time, Delay, 24 hours, Bypass defense zones program;

9. Built-in backup battery, automatically recharge, make alarm when power off

Technical parameters:

Input Voltage: DC12V/1A

Standby Current: < 55mA

Alarming Current: < 450mA

Wireless Frequency: 315MHz, 2262/4.7MΩ

GSM Frequency: 900/ 1800/ 1900MHz

Back-up Battery: NI-HI AAA*6 DC7.2V

Siren Volume: 110dB
Basic kits:

1 x Main Panel
1 x Wireless P. I. R Detector
1 x Wireless Door Sensor
1 x Siren
2 x Remote Controller
1 x Power Supply
1 x User Manual

Security Alarm GSM security alarm alarm security system gsm alarm systems gsm alarm system
jynxbox store
pstn alarm system
GSM + PSTN Alarm System
Emergency calling alarms
spot alarm system
IP camera
Video network alarm center SIM 2.1 card A8p card dreambox dm800 hd se v2 dreambox dm7080 dreambox dm7080 dreambox dm820 dreambox dm7020 hd v2 cheap wholesale dreambox dm800 hd v2 Sunray SR4 V2 Sunray SR4 800 se JynxBox Ultra HD V14 JynxBox Ultra HD V16 JynxBox Ultra HD V15 Dreambox DM7080 HD PVR Dreambox DM820 HD PVR Dreambox DM8000 HD PVR Dreambox DM7020 HD V2 Dreambox DM500 HD V2 SAT PVR Dreambox DM500 HD Dreambox DM800 HD SE with WiFi Dreambox DM800 HD SE Dreambox DM800 HD SE V2 Black Color Dreambox DM800 HD SE V2 White Color Dreambox DM800 HD PVR JynxBox Ultra HD V14 JynxBox Ultra HD V12 JynxBox Ultra HD V10 Sunray4 HD SE A8P Card 3in1 tuner Sunray4 HD SE Sim Card 3in1 tuner Sunray sun800 HD SE Sim Card Sunray 800 HD SE V2 Sat Receiver Sunray 800 HD SE Sat Receiver Sunray800HD SE V2 Cable Receiver Sunray800 HD SE Cable Receiver Cloud IBOX 4 Cloud IBOX 3 Vu Solo 2 SE

GSM Emergency Alarm

2015-10-26T01:51:00.001-07:00

GSM Emergency Alarm YL-007EG

Name:GSM Emergency Alarm YL-007EG

Model:YL-007EG

Memo:

products introduction

Gsm sos emergency security alarm system for disabled, elderly people with push button

Model No.: YL-007EG
Export Markets: Global
Additional Info.
Trademark: Wolf guard(FOB)
Packing: 10PCS/Carton
Standard: CE&RoHS&GMC&SGS&FCC
Origin: China Factory
HS Code: 8501109101
Production Capacity: 8000PCS
Product Description
Model No.: YL-007EG
Working Principle: Electronic Security Equipment
Application: House security
Sensor Type: Electric Alarm
Working Mode: Active
Signal Transmission: Wireless Alarm
Type: Anti-Theft Alarm
Usage: Auto
Export Markets: Global
Additional Info.
Trademark: Wolf-guard
Packing: Gift Box
Origin: China
Production Capacity: 98000PCS/Month
Product Description
Paypal Supported! Quadband personal emergency sos alarm for elderly(YL007EG)

It's a simple GSM Panic system but powerful alarm system. Suitable for emergency, Children, the elderly. With sos button.
In brief:
GSM Panic system YL-007EG is a simple but powerful alarm system. It can work alone with one GSM SIM inserted inside. There is a"SOS" panic button in the main panel, press it and it at once sends message & calls the pre-set alarm phone number for help or to alert.
And there are 10 wireless zones for wireless detector to code and work together.
Our standard kit: 1 main panel, 1adaptor, 1 wireless panic button, 1 manual.
Optional wireless accessories:
Smoke detectors, gas detector, door sensor, PIR sensor, Single repeater, remote controller, etc.

I. Features
1. Adopt GSM 850/900/1800/1900 bands, can be used all over the world.
2. Can per-set 5 phone numbers: When there is an alarm, it will call these numbers in order.
3. Can per-set 5 SMS numbers: When there is an alarm, it will send SMS to these numbers.
4. Maximum 30 wireless sensors including wireless panic button or remote controllers, etc.
5.2 wired ports to connect wired sensors.
6. The SMS content of the first 5 wireless sensors can be edited by users.
7. Support remote listen in and two-way communication (connect an external speaker).
8. SMS alert for power failure or recovery.
9. Built-in backup rechargeable battery to keep working after power off.

Specification:
Static current: 20mA
Power: 9V-12V DC
Working temperature: -10º C~ +40° C
GSM: 900/1800MHz band
Receiving code: ASK
Frequency: 315/433MHz
Wireless distance: 100 M
Wireless detectors: 16
Package:
Unit size12X9X2.5
Gift box: 16.5X11.5X5cm
Carton: 54*33.5*34(60PCS for one box)

Standard Kit
Alarm panel 1PC,
Power adaptor 1PC,
User manual 1PC.

For occations: Villa, house, hospital, shop, car, school, financial office, office, Particularly suitable for elderly and child in emergency.

RFID Touch Keypad Voice GSM Alarm System YL-007M2G

2015-10-07T23:50:00.002-07:00

Name:	GSM alarm system with LCD Display and Touchkeypad YL-00
Model:	YL-007M2BX
Memo:	Model NO.:YL-007M2BX Type:Security A
	detailed information >>

Name:	RFID Touch Keypad Voice GSM Alarm System YL-007M2G
Model:	YL-007M2G
Memo:	Model NO.:YL-007M2G Type:Anti-Theft
	detailed information >>

Name:	GSM RFID Alarm System with Touch screen YL-007M2FX
Model:	YL-007M2FX
Memo:	Basic Info. Model NO.:YL-007m2fx
	detailed information >>

Name:	3G WiFi PSTN(Contact ID) Alarm System YL-007WM2
Model:	YL-007WM2
Memo:	Model NO.:YL-007WM2 Type:Wireless Al
	detailed information >>

Name:	Wireless Home Intelligent Burglar GSM Alarm System YL-0
Model:	YL-007M3GB
Memo:	Wireless Home Intelligent Burglar GSM Alarm System Se
	detailed information >>

Name:	hot auto-dial SMS alarm system with LCD display YL-007M
Model:	YL-007M2FX
Memo:	Capacitive touch keypad, fashionable and elegant.
	detailed information >>

GSM Alarm System with TFT Color Screen YL-007M2F

2015-10-07T23:46:00.000-07:00

GSM Alarm System with TFT Color Screen YL-007M2F

Name:GSM Alarm System with TFT Color Screen YL-007M2F

Model:YL-007M2F

Memo:

products introduction

GSM wireless home security alarm system
TFT display + high quality language voice menu
4 types of programming zones -- Real time, delay, 24 hours, bypass defense zones;
5 types of remout control -- APP, SMS, Call, remout controller, main panel ...

Advantages of our security alarm system

*16 years of production and management, Permanent member units of

CHINA SECURITY & PROTECTION INDUSTRY ASSOCIATION, CSPIA

*Big TFT color display with English/Chinese dual language voice menu

*Voice prompt for all operations

*Built-in PIR and SOS big button

*2 wired inputs and 1 relay output

*Factory outfits, OEM/ODM

*Built-in LI rechargeable battery: make alarm when power off

*SMS alert for power failure or recovery

*Set the security system by control panel, SMS , remote calls

*Users can make calls by using keypad on alarm panel, just like a telephone

1. Details for alarm host :

*TFT color display with high quality language voice menu;
*Black box function with 30 pieces of record for latest Arm/disarm/alarm
*99 wireless zones, each zone with 4 types (real-time, delay, 24-hour and closed) of choice to setup;
*1-16 wireless zones and all wired zones SMS text support user define;
*Support 3 groups of timing Arm/disarm, which can select week info;
* Support 3 groups of timing reminding, which can select week info;
* Call 6 phone numbers and send 2 SMS numbers after alarm triggered;
*10-second voice message recording;
* Remote control Arm, Disarm, Monitor, and Intercom by phone;
*Wireless coding: easy to add additional wireless accessories;
*2 wired inputs and 1 relay output;
* Automatically adjust system time with GSM base.

Standard pack components

Main panel	1 pc
Door contact	1 pc
PIR sensor	1 pc
Mini wired siren	1 pc
Remote controls	2 pcs
Power adapter	1 pc
User manual	1 pc

Main panel

Input voltage	DC12V/ 1.2A
Standby current	<80mA
Alarming current	<450mA
GSM band	850/900/1800/1900MHz
Wireless frequency	433MHz±0.5MHz
Anti-interference	1V/m
Wireless receiving sensitivity	5mV/m
Working Temperature	0ºC~+40ºC
Humidity	≤90% ( no fog)

Packaging Dimension and Weight

Packaging Method:

1 set into one gift box

22 Gift boxes into one carton

Packaging Dimension and Weight

Gift box: G.W.(kg): 1.1 kgs Size(mm): 22*15.6*10cm

Carton: G.W.(kg): 24kg Size(mm): 56*37*46cm

PSTN Auto Dial Alarm System

2015-10-07T23:44:00.001-07:00

PSTN Auto Dial Alarm System YL-007K5

Name:PSTN Auto Dial Alarm System YL-007K5

Model:YL-007K5

Memo:

products introduction

. Details for alarm host :

97 wireless defense zones, 2 wired zones, and 8 remote controls;

Tamper alarm function (not shell);
Built-in PIR sensor;
12V relay output;
10-second voice message record;
Arm (exit), alarm (entry) delay function; delay time adjustable;
6 alarm phone numbers and 1 alarm center number;
Telephone line error or cut alert;
Built-in battery low power alert;
Can save 30pcs alarm records;
SOS, fire, gas, door, hall, window, balcony, and boundary alarm;
One-key-control: away arm, home arm, arm by remote controller or phone call;
Compatible with Contact ID: upload alarm information to the alarm monitoring center.

Standard pack components

Main panel	1 pc
Door contact	1 pc
PIR sensor	1 pc
Mini wired siren	1 pc
Remote controls	2 pcs
Power adapter	1 pc
User manual	1 pc

Main panel

Input voltage	AC=110~240V±10% DC=12V
Standby current	<60mA
Alarming current	<450mA
GSM band	850/900/1800/1900MHz
Wireless frequency	433MHz±0.5MHz
Wireless sensors	99pcs
Wireless receiving sensitivity	5mV/m
Working Temperature	0ºC~+40ºC
Humidity	≤90% ( no fog)

Packaging Dimension and Weight

Packaging Method:

1 set into one gift box

22 Gift boxes into one carton

Packaging Dimension and Weight

Gift box: G.W.(kg): 1.1 kgs Size(mm): 22*15.6*10cm

Carton: G.W.(kg): 24kg Size(mm): 56*37*46cm

PSTN Auto Dial Alarm System

2015-10-07T23:43:00.001-07:00

PSTN Auto Dial Alarm System YL-007K5

Name:PSTN Auto Dial Alarm System YL-007K5

Model:YL-007K5

Memo:

products introduction

. Details for alarm host :

97 wireless defense zones, 2 wired zones, and 8 remote controls;

Standard pack components

Main panel	1 pc
Door contact	1 pc
PIR sensor	1 pc
Mini wired siren	1 pc
Remote controls	2 pcs
Power adapter	1 pc
User manual	1 pc

Main panel

Input voltage	AC=110~240V±10% DC=12V
Standby current	<60mA
Alarming current	<450mA
GSM band	850/900/1800/1900MHz
Wireless frequency	433MHz±0.5MHz
Wireless sensors	99pcs
Wireless receiving sensitivity	5mV/m
Working Temperature	0ºC~+40ºC
Humidity	≤90% ( no fog)

Packaging Dimension and Weight

Packaging Method:

1 set into one gift box

22 Gift boxes into one carton

Packaging Dimension and Weight

Gift box: G.W.(kg): 1.1 kgs Size(mm): 22*15.6*10cm

Carton: G.W.(kg): 24kg Size(mm): 56*37*46cm

PSTN Auto Dial Alarm System

2015-10-07T23:42:00.005-07:00

PSTN Auto Dial Alarm System YL-007K5

Name:PSTN Auto Dial Alarm System YL-007K5

Model:YL-007K5

Memo:

products introduction

. Details for alarm host :

97 wireless defense zones, 2 wired zones, and 8 remote controls;

Standard pack components

Main panel	1 pc
Door contact	1 pc
PIR sensor	1 pc
Mini wired siren	1 pc
Remote controls	2 pcs
Power adapter	1 pc
User manual	1 pc

Main panel

Input voltage	AC=110~240V±10% DC=12V
Standby current	<60mA
Alarming current	<450mA
GSM band	850/900/1800/1900MHz
Wireless frequency	433MHz±0.5MHz
Wireless sensors	99pcs
Wireless receiving sensitivity	5mV/m
Working Temperature	0ºC~+40ºC
Humidity	≤90% ( no fog)

Packaging Dimension and Weight

Packaging Method:

1 set into one gift box

22 Gift boxes into one carton

Packaging Dimension and Weight

Gift box: G.W.(kg): 1.1 kgs Size(mm): 22*15.6*10cm

Carton: G.W.(kg): 24kg Size(mm): 56*37*46cm

PSTN Auto Dial Alarm System

2015-10-07T23:42:00.003-07:00

PSTN Auto Dial Alarm System YL-007K5

Name:PSTN Auto Dial Alarm System YL-007K5

Model:YL-007K5

Memo:

products introduction

. Details for alarm host :

97 wireless defense zones, 2 wired zones, and 8 remote controls;

Standard pack components

Main panel	1 pc
Door contact	1 pc
PIR sensor	1 pc
Mini wired siren	1 pc
Remote controls	2 pcs
Power adapter	1 pc
User manual	1 pc

Main panel

Input voltage	AC=110~240V±10% DC=12V
Standby current	<60mA
Alarming current	<450mA
GSM band	850/900/1800/1900MHz
Wireless frequency	433MHz±0.5MHz
Wireless sensors	99pcs
Wireless receiving sensitivity	5mV/m
Working Temperature	0ºC~+40ºC
Humidity	≤90% ( no fog)

Packaging Dimension and Weight

Packaging Method:

1 set into one gift box

22 Gift boxes into one carton

Packaging Dimension and Weight

Gift box: G.W.(kg): 1.1 kgs Size(mm): 22*15.6*10cm

Carton: G.W.(kg): 24kg Size(mm): 56*37*46cm

how to Test Your Home’s Security

2015-06-24T00:50:00.001-07:00

With millions of burglaries in the United States each year, this type of theft is not exactly a rare occurrence. In 2005 alone, more than 2 million homes were broken into, resulting in the loss of an average $1,725 in property and invaluable peace of mind. You probably take steps to minimize your risk of falling victim to thieves, but home security can sometimes be a confusing maze of choices. Here, test your home-security knowledge and find out whether your dwelling is a relative fortress or an easy target.

When do most burglaries occur?

in the day
While cover of darkness is a big plus, burglars actually strike homes more often in the daytime. According to the FBI, for all residential burglaries with a known time of day in 2005, more than 60 percent took place in daylight. (For commercial structures, that number is closer to 40 percent.)
doors and windows
Tunneling and roof drops may get burglars into museums, but residential thieves are far more opportunistic. They look for easy entry points: a flimsy back or garage door, an open window or a side entry hidden from the street. Picking the front-door lock isn’t out of the question, either.
- kicking it open
  Entry is all about speed. Getting a door off its hinges or slicing through it might take a while and increase the chances of getting caught. More often than not, the weakest point of a door setup is a low-grade strike plate, which can detach from a wooden door jam with one powerful kick.

Security Alarm GSM security alarm alarm security system gsm alarm systems a href="http://www.chinawolfguard.com/" rel="dofollow">security alarm systems wireless security alarm system security alarm systems for homes home alarm security systems wireless security alarm systems home alarm security system security alarm systems for home security home alarm systems alarm system for home security security alarms systems for homes home security alarms systems alarm system home security alarms security systems security and alarm systems security alarm systems wireless wireless alarm security system home security store alarm systems alarms and security systemsm security and fire alarm systems alarms and security systems security and fire alarm systems dreambox dm7080 dreambox dm7080 dreambox dm820 dreambox dm7020 hd v2 cheap wholesale dreambox dm800 hd v2 GigaBlue HD Quad Plus Sunray SR4 V2 Sunray SR4 800 se

Dreambox DM 7080 HD Dreambox DM 820 HD PVR Dreambox DM 8000 HD Dreambox DM 800 HD SE V2 Dreambox DM 7020 HD V2 Dreambox DM 500 HD V2

AB CryptoBox Satellite Receiver

How to Buy Burglar Alarm Products?

2015-06-24T00:48:00.002-07:00

After choosing the necessary parts, if you think about how and where from you should buy them, the best places for this are:

1.) Home Security Store
2.) aliexpress
3.) dhgate.ebay

Shopping online from these websites is safe and also you can buy any part of any model that you want. Also, by looking at the “best selling” products in categories, you can see which alarm system parts other users prefer.

With many articles that we will publish soon, we will introduce the bestselling home and office alarm systems and also those which have the most powerful features in detail. User comments and price-performance analysis will also be included in our review.

Dreambox DM 7080 HD Dreambox DM 820 HD PVR Dreambox DM 8000 HD Dreambox DM 800 HD SE V2 Dreambox DM 7020 HD V2 Dreambox DM 500 HD V2

AB CryptoBox Satellite Receiver

How to Choose and Buy the best Burglar Alarm System?

2015-06-24T00:47:00.002-07:00

Do you want to install a new burglar alarm system for your Home or Office? If you are indecisive because of performance and quality issues, or if you don’t know how to choose the best alarm system, read the rest of this article for some inspiration.

Before purchasing a high quality alarm system that has advanced features, the first thing you should do is know the features of the place that you are going to buy the alarm system for, fully and then make your choice according to that. There are many variables such as the location of the place where the installation is going to take place (garden floor, upstairs and attic…), how many rooms it has, the size of the rooms or the number of kitchen, bathroom and other entrance doors and windows. That’s why, before you choose your burglar alarm system you should know about these features fully.

If you are going to work with companies that install alarm systems, the expert staff will do all the necessary calculations for you and take care of the full installation. If you are going to do the installation yourself and if you want to install the alarm system that will give the best performance, we will explain all the details that you need to know, below.

Home or Office Burglar Alarm System Calculations

As we mentioned briefly above, before you install the alarm system, there are several counts and calculations that you need to do. Those are:

Number of Rooms: When you install motion detectors in the rooms at home or in the office, they connect to the central system. When deciding the number of motion detectors you should know how many rooms you are going to install these in.

Number of Kitchens and Bathrooms: If there are any places that the motion detectors are going to be installed in addition to the rooms such as the bathroom or kitchen, the number of those should also be added to the calculation.

Entrances: Motion detectors are also going to be installed in the sections where the home or office entrance gates are.

Example: If there are 6 bedrooms, 2 living rooms, 1 kitchen, 2 bathrooms and 2 entrance doors in the house where the alarm system is going to be installed, at least 13 motion detectors should be bought for this house.

The size of the rooms: There are specific coverage areas for motion detectors. The two main features that affect the coverage area are:

Distance: Starting from the place where it is installed, it scans the area that is in the front within the scope of a certain distance. This distance changes according to the power of the motion detector.
Angle: Motion detectors scan a specific area to their left and right. The size of the area that is to be scanned is specified in the technical details of the detector. In the picture below, you can see how a motion detector does the scanning according to distance and angle.

Blind Spots: Certain rooms in your house or office are not square or rectangular and thus there are some areas that the motion detectors cannot see. In such cases, more than one motion detector is used. That’s why, when deciding on the number of motion detectors to be purchased, you should know about the blind spots in the room. In the picture below, the parts that the motion detector cannot scan are shown.

Garden and Roof Security: Depending on the floor where your house or office is located, you might need to buy extra motion detectors. In order to prevent theft attempts, for example through the garden or the roof, we recommend that you should install extra motion detectors around these areas.

Number of Windows: One of the easiest places to break into your house or office is through windows. There are detectors called Window Contact that are specifically produced for windows. When the windows are opened, it sends a signal to the central control unit and activates the alarm. In order to decide how many of these components that you are going to buy, you should know the number of openable windows at your house or office.

Number of Entrance Gates: The detectors we mentioned above are called Door Contacts here. You should get these detectors that have the same working principle in the number of your entrance gates.

Before purchasing a new alarm system, the values above should be known exactly. According to the numerical values you have, you can decide on what kind of an alarm system, sensor or control panel you are going to purchase. In the following sections of this article we will talk about various examples on this issue.

Dreambox DM 7080 HD Dreambox DM 820 HD PVR Dreambox DM 8000 HD Dreambox DM 800 HD SE V2 Dreambox DM 7020 HD V2 Dreambox DM 500 HD V2

AB CryptoBox Satellite Receiver

Visonic Powermax Pro Home Security System

2015-06-24T00:39:00.002-07:00

The incidents of theft and burglary are on the rise, and you cannot leave the safety and security of your home and your family members unattended. After all, you have made your home investing so much of hard earned money, and you have bought so much to decorate it; you cannot breathe easy just because you have got your home insured.

There are many products available in the market, which claim to be fool proof, but you have to keep your requirements and the budget in mind before selecting any device.

The most popular security systems in the market are the wireless systems. They are easy to install and provide flexibility to the user. They come equipped with alarms and motion detectors which are installed at different places where there are chances of intrusion. These alarms and sensors make use of the most modern technology and become active whenever there is a person in the vicinity or tries to break in your home.

Visonic Powermax Pro Home Security System is one such modern gadget which provides full protection to your home and its belongings from any burglary attempt. It is wireless and operates silently 24X7 so that the homeowner can breathe easy. It is a complete security system that keeps the home protected without causing any botheration to the owner of the house. This is a premium security system that gives the user the facility to remain connected with the happenings inside the house as he can monitor video feeds from his house wherever he is, if he uses a web browser.

Visonic Powermax Pro Home Security System is a robust, yet compact and has a very sleek design which is very attractive to look at. But do not be fooled by its design, it is very reliable and does not let any intruder come near the house using the most modern technology. It is very user friendly and even the elderly can use it without any difficulty. It is very easy to install and once set, it quietly goes about its business of providing safety and maximum protection to the house and its inmates.

Visonic Powermax Pro Home Security System uses a built in PSTN system of communication and X-10 interface, which allows the user to keep an eye in and around his home on his GSM mobile and on his laptop if he has a broadband connection. It comes loaded with features but the user has the liberty to choose only those that meet his requirements and budget.

Visonic Powermax Pro Technical Specifications

Visonic Powermax Pro Home Security System contains a lot of components including wireless alarm system, wireless door/window contact, Pet immune motion detector, button keychain remote, backup battery, RFID Prox Reader, RFID Prox tags and installation manuals.

Powermax Pro Home is working all the time and the owner is relaxed when he is at home, and even when he is away. It even provides for email notifications pertaining to the safety and security of your home. If the home owner is away on a vacation to a foreign country, he can get all the video feed via camera controls that keep up surveillance all the time. This is a very comforting feeling that a home owner gets when he is away from home.

This is a guaranteed product that keeps performing in all weather conditions and it is virtually impossible for any burglar to bypass it to enter the home. With alarms and motion sensors placed strategically, any attempt of intrusion gets foiled as loud sounds of siren start blurting and the burglar is scared away from the premises.

Visonic Powermax Pro Home Security System uses the state of the art technology and has a modular design. It is a self contained unit and does not require any other boxes. It has many built in modules, including GSM and broadband communicator which are wonderful features that enable the home owner to be aware of the safety of his home at any point of time. It comes with an unmatched 72 hour battery backup so it keeps working even if there is any power interruption of a long duration.

The user interface is simple and the user can control all the alarms, sensors, lights and even home appliances with the help of this wonderful gadget. It comes with additional ports to be used as a hardwired system should there be any difficulty in the wireless system. The user interface is LCD based which makes it easy for anyone to operate system. Visonic Powermax Pro Home Security System monitors the security of your home and reports everything to monitoring stations, pagers, SMS, email, mobiles, and landlines.

The system can be customized as per the requirements of the home owner and he can choose to use or not use some of the features of this amazing security system. Within a short period of its launch, Visonic Powermax Pro Home Security System has become a choice of millions of home owners all over the world.

Dreambox DM 7080 HD Dreambox DM 820 HD PVR Dreambox DM 8000 HD Dreambox DM 800 HD SE V2 Dreambox DM 7020 HD V2 Dreambox DM 500 HD V2

AB CryptoBox Satellite Receiver

How Fire Sprinkler Systems Work

2015-05-26T19:12:00.001-07:00

You’ve probably seen a number of movies where a small amount of smoke triggers all of the sprinklers in a building, soaking everyone and everything inside. But did you know that sprinklers aren’t even triggered by smoke, and they don’t all go off at once? Fire sprinkler systems are actually heat activated, one sprinkler head at a time, and most fires usually require only one or two sprinklers to be extinguished. These are just two of the many misconceptions about fire sprinkler systems. In this article, we’ll dispel other myths and learn the ins and outs of this important safety technology.

You might think installing a fire sprinkler system is like choosing water damage over fire damage. This belief is a spinoff from the myths we just mentioned — that sprinklers are activated by smoke and every sprinkler head goes off at the same time. If that were the case, sprinkler systems could potentially cause more harm than good. After all, if you burned a piece of toast, every sprinkler would go off, soaking all of your belongings, even though there never was any real danger of fire. Fortunately, the clever engineers who developed these systems designed them to reduce the damage to your property from water, smoke and fire.

Fire sprinkler systems have been around for more than two centuries and have seen significant improvements over the years. It’s true that early versions weren’t very reliable and caused significant water damage. But today, sprinkler systems are credited with reducing deaths and loss of property by more than 65 percent [source: Fleming]. Since each sprinkler head is automatically triggered by fire-specific temperature, just one or two sprinklers can quickly extinguish and/or contain a fire to the room where it started and cause little property damage. And because sprinklers use about six times less water than a fire hose, they’re actually less harmful to your property than a visit from the fire department.

Security Alarm GSM security alarm alarm security system security alarm systems wireless security alarm system security alarm systems for homes home alarm security systems wireless security alarm systems home alarm security system security alarm systems for home security home alarm systems alarm system for home security security alarms systems for homes home security alarms systems alarm system home security alarms security systems security and alarm systems security alarm systems wireless wireless alarm security system home security store alarm systems alarms and security systemsm security and fire alarm systems alarms and security systems security and fire alarm systems dreambox dm7080 dreambox dm7080 dreambox dm820 dreambox dm7020 hd v2 cheap wholesale dreambox dm800 hd v2 GigaBlue HD Quad Plus Sunray SR4 V2 Sunray SR4 800 se

Dreambox DM 7080 HD

Dreambox DM 820 HD PVR

Dreambox DM 8000 HD

Dreambox DM 800 HD SE V2

Dreambox DM 7020 HD V2

Dreambox DM 500 HD V2

AB CryptoBox Satellite Receiver

AB IPBox PRISMCUBE RUBY

AB CryptoBox 650HD Receiver

AB CryptoBox 600HD Receiver

GigaBlue HD Receiver

GigaBlue HD Quad Plus

GigaBlue HD Ultra UE

GigaBlue IP BOX Multiroom Linux e2

About Pulsed Infrared Light Therapy at Home

2014-11-27T18:50:00.002-08:00

About Pulsed Infrared Light Therapy at Home

Pulsed infrared light therapy is a type of medical treatment you can administer at home. It goes by several names, including LED therapy, phototherapy, photodynamic therapy (PDT) and intense pulsed light therapy (IPL). Pulsed infrared light therapy uses a laser to stimulate blood circulation in the target area.

Function
Pulsed infrared light therapy uses light-emitting diodes to penetrate the skin and trigger the activation of nitric oxide, a free radical in the body that promotes increased blood circulation. Because of the improved circulation of blood in the targeted area, pulsed infrared light therapy can treat aches and pains in muscles and joints, fibromyalgia, inflammation, osteoarthritis, carpal tunnel, diabetic ulcers, sinusitis, depression, skin problems and tennis elbow. It can also reduce scar tissue and promote the regeneration of cells.

Home-Care
You can treat yourself with pulsed infrared light therapy at home by buying LED pads. You should place the LED-side of the pad directly onto the skin of the area you would like to treat. You can also buy infrared light therapy devices in the form of something that looks like a flashlight, an infrared bed for the whole body and an infrared light helmet for the head.

Cosmetic Treatment
Pulsed infrared light therapy also has cosmetic uses, particularly as treatment for acne and as an anti-aging method. It is helpful against acne because it might fight bacteria. As for anti-aging, light therapy promotes collagen production, which is what makes skin look youthful.

Other Uses
You can also use pulsed infrared light therapy at home to treat seasonal affective disorder by exposing yourself to full-spectrum light. You can use it to treat chronic headaches as well. Additionally, pulsed infrared light therapy is helpful for treating your pets' aches and pains.

Warning
You should not use pulsed infrared light therapy if you are pregnant because there is no study as of yet on the effects of this therapy on pregnant women.

Dreambox DM7080HD dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
wholesale usb flash drive wholesale lenovo cellphone Lenovo K910 VIBE Z Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX

How to Tell If a TV Is LED

2014-11-27T18:49:00.006-08:00

How to Tell If a TV Is LED
LEDs (light-emitting diodes) are increasingly used to provide backlighting for LCD televisions. While marketed as a new type of television screen, LED TVs are not actual LED screens but the same LCD screens as most modern televisions using a different type of illumination. Using LEDs behind the screen or at the edges uses less power than fluorescent lights and also provides deeper dark colors, as light doesn't leak out of the LEDs. As a selling point, a television's use of LED is typically displayed on the screen.

Instructions
1
Know the year of production, or purchase, of the television. LED televisions first started entering the home electronics market in 2005, so if the television was manufactured before then, it is not an LED TV.

2
Check the front of the television for a sticker that indicates if it has an LED display. LED backlighting is a major selling point for many electronics manufacturers, so that fact is typically displayed on the front of a new television.

3
Locate the model number on the back of the television. Typically, this is found on a sticker with the manufacturer's name, make and model number and other information. Use this information to research the television and determine whether it uses LED backlighting.

Dreambox DM7080HD dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
wholesale usb flash drive wholesale lenovo cellphone Lenovo K910 VIBE Z Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX

How to Build a 4 LED Slow Blinking Circuit

2014-11-27T18:49:00.003-08:00

How to Build a 4 LED Slow Blinking Circuit

You can use the 555 timer integrated circuit (IC) to build a variety of light-emitting diode (LED) blinking circuits. The 555 can drive LEDs directly and needs only a few extra parts. One such circuit, sometimes called the "railroad flasher," alternately turns two LEDs on and off. Two of these circuits will give you a total of four slowly blinking LEDs. The components used are very inexpensive, and you can build these circuits in under an hour with little difficulty.

Instructions
1
Insert the two 555 ICs into the breadboard so they straddle the horizontal slot in the plastic board. Orient the ICs so the dot or key slot on one end faces to your left. Space the ICs about 2 inches apart. Take care to not bend the pins out or under the ICs.

2
Insert one 10-microfarad capacitor so its positive lead connects to the first IC's pin 2 and its other lead connects to pin 1. Insert a jumper wire to connect pin 2 to pin 6. Insert one lead of a 47K ohm resistor so it connects to pin 6 of the IC. Insert its other lead so it connects to pin 3. Insert a jumper wire to connect pin 8 and pin 4 together.

3.Examine the LEDs and note that the round case has a flat spot. The lead nearer to the flat spot is the LED's cathode. Insert the cathode lead of one LED so it connects to pin 1 of the IC. Insert the other lead, the anode, into an unused column on the breadboard. Insert one lead of a 220-ohm resistor into this column. Insert the resistor's other lead so it connects to the IC's pin 3. Insert another 220-ohm resistor so one lead connects to pin 3. Insert its other lead into an unused column. Insert the cathode of another LED into this column. Insert its anode lead so it connects to pin 4.

4
Repeat Steps 3 and 4 for the second 555 timer.

5
Insert the red (positive) lead coming from the 9-volt battery clip so it connects to pin 8 of the first IC. Insert a jumper wire so it connects pin 8 of both ICs together. Insert the black (negative) lead coming from the 9-volt battery clip so it connects to pin 1 of the second IC. Insert a jumper wire so it connects pin 1 of both ICs together.

6
Double-check all your connections. Clip a fresh 9-volt battery into the clip. The four LEDs should begin blinking.

Dreambox DM7080HD dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
wholesale usb flash drive wholesale lenovo cellphone Lenovo K910 VIBE Z Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX

How to Replace a LED Stereo Receiver

2014-11-27T18:49:00.000-08:00

How to Replace a LED Stereo Receiver

Car stereo systems are evolving to also play back DVD videos through an attached LED monitor. The monitor displays the video, shows off the current audio track and may also have a built-in GPS function. If you are looking to change your current LED stereo receiver, you can do so with just a few household tools. And because the new LED stereo monitor receiver is going to have the same connection points, you shouldn't have too much trouble setting up the equipment.

Instructions
1
Turn off the vehicle and remove the key from the ignition. You don't want the car running when dealing with electrical wires connected to the battery.

2
Remove the dash area around the current LED stereo receiver. Most dashboards are attached without screws and pull off with some prying. Check your owner's manual for complete instructions.

Slide out the LED stereo receiver and disconnect the wire cable running into its back. Once the receiver is free of the cable you can completely pull the receiver out of the vehicle.

4
Plug the wire cable into the connection port on the back of the new LED stereo receiver. If the receiver is the same brand, you can just slide it back into the vehicle. If it is a new brand, you will need a sleeve adapter to ensure it fits into the available slot. The receiver slides into the adapter and two Phillips screws attach into the rear of the sleeve to tighten it to the receiver.

5
Push the new LED stereo receiver into the open slot, then place the dash back into position to secure the LED stereo receiver into place.

Dreambox DM7080HD dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
wholesale usb flash drive wholesale lenovo cellphone Lenovo K910 VIBE Z Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX

How to Add GameCube LEDs

2014-11-27T18:48:00.001-08:00

How to Add GameCube LEDs

The GameCube gaming console was released in November 2001, before the

LED light trend hit gaming enthusiasts, so a new trend of making old

consoles such as the GameCube modern with LED lights is becoming more

and more popular. The most popular modification of the GameCube hardware involves adding LED lights to the controllers, since they are easier to obtain than a new console if you mess up and damage some interior elements.

Instructions
1
Remove the six screws from the back of the clear GameCube controller with the Gamebit screwdriver. Set aside the screws. Pull the controller's front and back faceplates away from one another; if they are not extremely dirty, they will pull apart with minimal effort. Set aside the back face plate with the screws and lay the front faceplate carefully so that the interior components are facing up towards you.

2
Prepare about two 4-inch lengths of the 24-gauge electric wire for soldering to the two leads located on the right side of the controller. The existing white wire is positive, while the black is negative.

3.Place your LED lights where you want them to sit inside your controller. Before making any positions permanent, place the back side of the controller in its place without securing it entirely, so you can ensure that you like how it looks. It is recommended to place the LEDs on both sides of the rumble pack.

4
Solder the end of the first wire to the left lead on the circuit board, and the end of the second wire to the lead on the right. These leads are connected to the rumble pack feature, so the LEDs will blink in accordance with the controller's vibration.

5
Grasp the wire on the left in your hand, and attach it to the left LED light by wrapping the center of the wire around the LED's prongs, and attaching the remainder of the wire to the resistor. Use the electrical tape to attach the resistor directly under the rumble pack. Repeat this step to connect the LED on the right side of the

controller.

6
Wrap all wires with electrical tape, and secure them to the body of the controller if there is excess wire. You do not want wire being in the way of any buttons, or the rumble pack.

Tips & Warnings

Only attempt this modification if you have some sort of previous electric experience to avoid permanent damage to the GameCube's hardware. Scratching or soldering your circuit board at all can eradicate the entire controller.
Always discharge static on your hands while working with computer components by touching base metal.

Dreambox DM7080HD dm7080HD cheap dreambox DM8000HD led wall washer light led pixell light LED Underwater LightLED Spot Light LED Spot Light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE
wholesale usb flash drive wholesale lenovo cellphone Lenovo K910 VIBE Z Dreambox DM7080HD decoder DM7020HD V2 DECODER DREAMBOX

How to Add GameCube LEDs

2014-11-27T18:33:00.000-08:00

How to Add GameCube LEDs

The GameCube gaming console was released in November 2001, before the

LED light trend hit gaming enthusiasts, so a new trend of making old

consoles such as the GameCube modern with LED lights is becoming more

and more popular. The most popular modification of the GameCube hardware involves adding LED lights to the controllers, since they are easier to obtain than a new console if you mess up and damage some interior elements.

Instructions
1
Remove the six screws from the back of the clear GameCube controller with the Gamebit screwdriver. Set aside the screws. Pull the controller's front and back faceplates away from one another; if they are not extremely dirty, they will pull apart with minimal effort. Set aside the back face plate with the screws and lay the front faceplate carefully so that the interior components are facing up towards you.

2
Prepare about two 4-inch lengths of the 24-gauge electric wire for soldering to the two leads located on the right side of the controller. The existing white wire is positive, while the black is negative.

3.Place your LED lights where you want them to sit inside your controller. Before making any positions permanent, place the back side of the controller in its place without securing it entirely, so you can ensure that you like how it looks. It is recommended to place the LEDs on both sides of the rumble pack.

4
Solder the end of the first wire to the left lead on the circuit board, and the end of the second wire to the lead on the right. These leads are connected to the rumble pack feature, so the LEDs will blink in accordance with the controller's vibration.

5
Grasp the wire on the left in your hand, and attach it to the left LED light by wrapping the center of the wire around the LED's prongs, and attaching the remainder of the wire to the resistor. Use the electrical tape to attach the resistor directly under the rumble pack. Repeat this step to connect the LED on the right side of the

controller.

6
Wrap all wires with electrical tape, and secure them to the body of the controller if there is excess wire. You do not want wire being in the way of any buttons, or the rumble pack.

Tips & Warnings

Only attempt this modification if you have some sort of previous electric experience to avoid permanent damage to the GameCube's hardware. Scratching or soldering your circuit board at all can eradicate the entire controller.
Always discharge static on your hands while working with computer components by touching base metal.

Dreambox DM7080HD dm7080HD dm8000HD led wall washer light dm8000 DM7080 HD
Dreambox DM8000 HD DM8000 HD DM8000
dreambox dm7020 HD 7020 HD DM7020 HD
DM500 HD DM500 HD V2 Dreambox dm500 HD
DM800 HD SE v2 dreambox dm800 HD SE V2 Dreambox dm800 HD SE V2 DM800 HD SE
Dreambox DM800 HD SE DM800 HD SE

How to Build an LED Flex Light

2014-07-21T02:34:00.005-07:00

How to Build an LED Flex Light

Light-emitting diode flex lighting provides an impressive display of lights that are energy-efficient and long-lasting, but they can be expensive. If you want to get the effect of LED strip lights but don't want to pay store prices, then build your own. The light is fun to make and you will gain the pleasure of telling your friends and family members that you did it yourself.

Instructions
1
Measure the distance of the place where you want to put your LED flex lights. Add a couple of extra feet so that the lights don't have to go in a straight line.

2
Cut the clear flexible hollow tube the length you calculated with a sharp knife. Cut a strip of wire with a knife the same length as the tube you just cut, but add an extra few feet to allow for the wires to connect to the power source. For example, if the LED flex lighting tube is 6 feet and the distance from each end of the tube to the power source is 6 feet, you need to cut a strip of wire 18 feet long.

Cut the strip of wire into smaller strips. Cut two strips of wire the distance you measured from the power source to where the LED flex light tube begins. Using the previous example, cut two strips of wire 6 foot long. This leaves you with the strip of wire that goes inside the tube. Put the other two strips of wire to one side and keep the wire strip that goes inside the tube.

4
Work out the number of LED lights you want to wire in the tube; the more you use, the better the lighting effect will be. Make a note of the number of LEDs on a sheet of paper. Cut the wire strip that will go inside the tube into equal, short strips. The number of strips depends on the number of LED lights, but is always two less than the number of lights. For example, if you are wiring 20 LED lights, you will need 18 equal, short strips.

5
Remove just under ? inch of outer plastic off of the ends of every strip of wire with wire strippers. This includes the two long wires you earlier put to one side.

6
Insert the LED light bulbs into the bulb holders if they are not already fitted. Gently push them into the holder with your fingers. Read the side of an LED bulb to determine the voltage and make a note of it on a sheet of paper.

7
Attach the end of one of the two long wire strips to the first LED light holder terminal. LED light holders use two small terminal clips. Press the clip with your fingers and insert the wire in the opening. Release the clip so that it holds the wire in place.

8
Attach the end of a short wire strip to the other terminal clip on the first light holder. Attach the opposite end to the next LED light holder. Repeat the process by attaching the short strips to the LED light holder terminals, sequentially using the same method as before until you attach the last short strip of wire to the terminal of the last light holder. Attach the end of the other long wire strip to the remaining terminal on the last light holder.

9
Attach the end of one of the long strips of wire to a thin wooden pole that is longer and thinner than the flexible plastic tube; a pole that is used to hold the stems of plants is a good choice. Use a strip of plastic tape to hold the wire on the end of the pole.

10
Push the pole and the wire into the end of the clear plastic tube until it comes out the other end. Do this carefully, as you do not want the light connection to break. Pull the pole and wire out of the end of the tube until just before the first LED light gets to the end of the tube. All the LED lights are now in the tube and you have two long wires extending from each end of the tube. These wires will connect to your power source.

11
Multiply the voltage from each LED light by the number of LED bulbs in the tube. LEDs usually require between 1.5 and 3.5 volts. The answer you calculate equates to the voltage you will need your power source to supply.

12
Use a battery or transformer that produces the same voltage you just calculated. Do not use a power source that produces more voltage that you calculated; otherwise, you will blow the LEDs. Using a power source that produces slightly less volts is fine, but it means your lights will not glow as brightly.

13
Attach the end of one of the long strips of wire from the tube to one of the terminals on the power source; it doesn't matter which terminal. Attach the other long wire strip from the other end of the tube to the other terminal on the power source. Your LED flex lights should illuminate.

dm8000 hd wholesale
LED Wall Wash light LED video pixels LED Digital Tube light LED Spot Light LED Point Light LED Under-ground Lighting LED Commerical Lighting LED ba?ador de pared LED píxel de luz Tubos LED luz llevada del punto LED punto de Luz lenovo cellphone LED Spotlights Buried LED Iluminación Comercial Мытья стены СИД света Светодиодные видео пикселей Светодиодные трубки

Power supply for DM500C DM500S DM500T

Remote control for DM600PVR DM7000 DM7020S DM7025

Power Supply for DM600PVR DM7000 DM7020S DM7025

dm8000 hd dreambox dm8000 dm 8000 hd dreambox 8000 dreambox dm7020 dm7020 HD dreambox 7020 dm7020 HD dreambox 7020 Dreambox dm800 HD Se dm800 hd se with Wifi dm800 hd pvr dreambox dm800 hd pvr cheap dreambox dm800 hd pvr http://www.dreamboxok.com/dm500si.html Dreambox dm500S satellite receiver http://www.dreamboxok.com/Dreambox-DM-500-S.html DreamboxDM 500 OEM http://www.dreamboxok.com/DM500-OEM.htm Dreambox DM500C http://www.dreamboxok.com/Dreambox-DM-500-C.html Dreambox DM500C OEM http://www.dreamboxok.com/dm500c-oem.html Dreambox DM500S OEM http://www.dreamboxok.com/dm500s-oem.html Dreambox DM500Si Silver http://www.dreamboxs.com/dm500si.htm Dreambox dm500Si black http://www.dreamboxok.com/dm500si-black.htm Dreambox dm 518S http://www.dreamboxs.com/dreambox-dm518s.html Dreambox DM500T http://www.dreamboxok.com/Dreambox-DM-500-T.html AzBox HD Elite

How to Make Your Own Screw-in LED Light Bulb

2014-07-21T02:34:00.002-07:00

How to Make Your Own Screw-in LED Light Bulb

Making your own screw-in LED light bulb is a great way to save money and to go green. An LED is a light emitting diode, and some companies offer regular screw-in bulbs with the incandescent part replaced with LEDs. This helps save money because LEDs use less power and last longer than regular incandescent bulbs. Another added benefit is that LEDs generate close to no heat so less air conditioning is needed to deal with the heat given off by regular light bulbs.

Instructions
1
Place the screw-in light bulb plug down in front of you. Unscrew the plastic replica bulb off of the socket and place it to the side. You are going to use it in another step, so do not lose it. Place down 10 LEDs in a line in front of you. Twist a wire lead from the first LED to a wire lead from the second LED. Twist the free wire lead on the second LED to a wire lead on the third LED. Repeat this twisting process until only the first and last LED have a free wire lead.

2
Twist the free wire lead from the first LED into the positive electrical post on the top of the screw bulb plug. Take the free wire lead from the 10th LED and twist it onto the negative electrical post. The posts have a plus and a minus symbol next to them to denote their polarity.

Wrap all the exposed wire leads in electrical tape, but do not wrap them together. Wrap the wires separately to keep them from shorting the circuit. You are making a simple series circuit, and shorts will break the entire circuit. Do not cover the light emitting parts of the LEDs with tape or it will cut down on the light given off.

4
Push the LEDs into the plastic bulb and then re-screw it to the screw-in plug. Screw the plug into a light socket (with the socket off) and then turn the light on. If the light does not come on, then one of the connections was not twisted properly and came lose. Take the bulb apart and re-twist all the connections to be sure.

dm8000 hd wholesale
LED Wall Wash light LED video pixels LED Digital Tube light LED Spot Light LED Point Light LED Under-ground Lighting LED Commerical Lighting LED ba?ador de pared LED píxel de luz Tubos LED luz llevada del punto LED punto de Luz lenovo cellphone LED Spotlights Buried LED Iluminación Comercial Мытья стены СИД света Светодиодные видео пикселей Светодиодные трубки

Power supply for DM500C DM500S DM500T

Remote control for DM600PVR DM7000 DM7020S DM7025

Power Supply for DM600PVR DM7000 DM7020S DM7025

How to Build an LED Flex Light

2014-07-21T02:33:00.001-07:00

Power supply for DM500C DM500S DM500T

Remote control for DM600PVR DM7000 DM7020S DM7025

Power Supply for DM600PVR DM7000 DM7020S DM7025