Way 2 Resources Info Tech Blog

Global Warming

2011-06-21T09:35:00.000-07:00

Greenhouse effect does not allow escape of reflated radiation from earth to space. Due to this, the reflected radiation come back to earth surface and finally increase the atmospheric temperature Therefore, the mean ambient temprature of earth is continuously increasing at the rate of 0.5 to per1 degree centigarte per decade. It is known as global warming.

Some of the predicted effects of global warming are discussed here:

1. Ozone depletion : -

The concentration of carban di oxide in air, which is most responsible greenhouse gas, is continously increasing. It is also influcing the depletion of ozone layer in atmosphere which protect life on earth from U.V. radiation coming from the sun.

2. Seal level : -

Warming of the earth's atmosphere i.e. global warming will lead to warming of the upper layer of the ocean which lead to the tharmal expansion of water. The expansion raises the sea level. Increasing sea level is also responsible for submergence of many low lying coasted areas.

3. Effect on species distribution : -

Due to global warming, distribution of different species or organisms also change from altitude and latitude. Many species are migrating towards polar areas due to moderately high temprature.

Rapid rise i temprature also cause death of tree which are temperature sensitive. Due to this, many species are going to disapper because they are migrate fast according to desired temprature.

4. Food production : -

In temprature region, small rise in temprature may enhance the crop productivity but larger temprature change will decrease the crop productivity.Global warming reduces drop productivity or food production due to increased plant diseases, pets, weeds etc.desite of beneficial carbon di oxide fertilization effect.

5. Marine ecosystem : -

Due to increasing concentration of carbon di oxide ocean are expected to absorb more and more carban di oxide and decompose in the form of carbonic acid.

6. Effect on weather and climate : -

Due to global warming, the average mean temprature of earth is expected to increased by 1.4 degree to 5.8 degree centigrate by the year 2100 from year 1900. It increases the moisture carrying capacity of the atmosphere and also changes the precipitation pattern at deficient latitudes. Precipitation is more at higher latitude and less at lower latitude.

Central Processing Unit Part-II

2011-06-20T07:21:00.000-07:00

Secondary Storage : -

There are many different type of secondary storage devices. For example: - Magnetic tape,floppy disk, magnetic disk,optical disk.

Magnetic Tape : -

Manetic tape is an older device for secondary storage though it is very popular even at the present.

* Magnetic tape can virtually staore data of unlimited quantity because many tapes can be used.

* Magnetic tape is low cost secondary storage device.

* Magnetic tape reels are easy to store and handle.

Magnetic Disk : -

Magnetic disk is the most widely used direct-access secondary storage medium today. A magnetic disk is thin, circular metal plate/platter coated on both sides with a magnetic meterial. There are two kinds of magnetic disk and floppy disk. A hard disk resembles a thin steel platter with an iron oxide coating. Floppy disk is used in microcomputer.

Floppy Disk :-

A floppy disk is used as a medium of direct access secondary storage for minicomputer systems. A floppy disk is also reffered to as diskettle or floppy, the latterbeing more comman.A floppy disk is made of flexible plastic which is coated with magnetic oxide. The disk is enclosed within a square plastic or card boared jacket, often reffered to as a cartridge. Floppy disk are typically 3.5, 5.25, or 8 inches in diameter.

Optical Disk : -

Optical disk are increasingly becoming popular for secondary storage. An optical disk also called compact disk or laser optical disk.There are three ways inwhich data are stored-compact disk read only memory (CD-ROM), write once/read many (WORM), and magneto- optical disk.

Compact Disk Read Only Memory(CD-ROM): -

The most common optical disk system used with microcomputers is known as CD-ROM. It is a 4.75 inch compact disk that can store upto 660 megabyte. A CD -ROM is read only memory no new data can be written on these but can be only read. That is why CD-ROMs are used for reference materials with massive amount of data, such as encyclopedias, directories, or online databases and for storing multi media applications that combine text, images, and sound.

Central Processing Unit Part-1

2011-06-17T08:41:00.000-07:00

Central processing unit (CPU)is the most important part of computer system and manipulate symbols, numbers,and letters and controls other parts of the computer system. A CPU has three element primary storage, airthmatic logic unit (ALU), and control unit.

Primary storage : -

Primary memory also known as main memory,core memory,or immediate access storage, provides capability to store input data, statements from currently undergoing processing, data resulting from processing, and data in preparation for output. Data and programs are placed in primary storage before processing, between processing step, and after processing has ended,piror to being returned to secondary storage or realesed as output.

Types of semiconductor memory : -

A semiconductor is an integrated circuit made by printing of numerous transistor on a small sillicon chip. There are several types of semiconductor memory used in primary storage. These may be two categories-Random access memory and read only memory.

Random access memory (RAM): -

RAM is a read/write memory. It is called random access because each seperate location(address) inside the memory can be accessed as easily as any other location and takes the same amount of time. RAM is extremely fast but can also be expensive. RAM is used for short term storage of data or programes instructions.

Read only memory(ROM) : -

ROM provide permanent memory storage, that is, informaton is written permanently into the memory. Data can only be read from the memory but cannot be written there. ROM is normally used to store information that the computer may need frequently for its own operation.

There are two suclasses of ROM-

1. Programmable read only memory (PROM).

2. Erasable programmable read only memory(EPROM).

Arithmatic logic unit: -

Arithmatic logic unit(ALU) is used for arithmatical operations, such as addition,subtractions, multiplication, divisons,etc. In ALU the logic part used for operations ,such as comparing, selecting, matching, and sorting/merging of data.For comparing to numbers by subtracting one numberfrom the other, adder in ALU is used.

Control unit : -

Control unit, also known as nerve center of a computer system, controls and coordinates all the activities of the computer and monitors the execution of any program being processed.The CU controls and cordinates the different components of the components of the computer inthe same way as the brain directs the action of human body.The CU does not perform the actual processing on the data but direct the flow of sequence of operations. The series of operations required to process a machine instruction is called the machine cycle.

Computer System

2011-06-16T08:10:00.000-07:00

Information System of the present area are highly dependent on computers, either small or large size, depending on the requirements of individual organisations.

The literal meaning of computer is a large machine carrying out calculations of several stages automatically. To be more precise, computer is a programmable machine with two characteristics:

(1) It responds to a specific set of instructions in well-define manner

(2) It can execute a prerecorded list of instruction

Various physical component of a computer-cables, transistors,circuits,etc. are known as hardware.

Type of computer: -

There are many types of computers and there are many ways in which these can be classified. There are:

1. By the type of data computers are capable of manipulating-analog and digital;

2. By the purpose for which these are designed -general purpose and dedicaed;

3. By their memory size and processing capabilities- super computer,mainframe, minicomputer,microcomputer and workstation.

1. Analog and digital computers : -

An analog computer measures continuous electrical and physical magnitudes like voltage,pressure,shaft rotation, water flow,etc.and reacts in a predefined way to changes in the specified quantity.Thus, it works as a process control device. An analog computer has the ability to accept inputs which vary with time and intensity and directly apply them to various devices within the computers which performs the computing operations.

Analog computer are used in scientific and industrial fields for stimulating various physical systems or automatically controlling industrial processes. A digital computer operates directly on decimal digits that represent either discreate data or sysmbols.It takes input and gives output in the form of numbers, lettrers, and special characters.

2. Super computers : -

A super computer is the largest,fastest, most powerful, and most expensive computer that can perform very complex computation involving hundreds of thousand of variable factors.

The speed of super computer are measured in nanosecond(one billionth of asecond) and gigaflop(one billion flotting-point airthmatic operations per seconds). Super computers can perform upto128 gigaflops, and use bus width of 32 or 64.

3. Mainframe computer : -

Mainframe computers are widely used computers in large bussiness. Indial railways use mainframe for reservation. Mainframe computer system is usually composed of several computers of comparatively smaller capacity in addition to the mainframe, or host processor.

Generally, Mainframe have 50 megabytes to over 1 gigabytes of random access memory(RAM).

4. Minicomputer :-

Minicomputers started in late 1960s, and Digital equipment corporation of the USA launched its first minicomputer, DEC PDP-8 in 1968. A minicomputer works on the principle of the mainframe except that in a minicomputer, there are smaller number of computer terminals and it has lower memory capacity,usually ranging between 10 megabytes to 1 gigabytes. The main use of minicomputer is in the field of education, local government,etc. besides in business. In bussiness, minicomputers are used for invoicing ,inventory control, payroll,sales analysis, etc.

Micro computer : -

A microcomputer also terned as miniaturised computer and incomman parlance as personal computer, is one that can be placed on desktop or carried from one place to another. Microcomputers are built arround microprocessor chips with layers of etched and printed circuits,containing all the elements required to process binary encoded data. A typical microcomputer has a keyboard for input and uses tape cassette players and / or flopy disk drive to enter to enter data and programs and to retrives outputs. Many microcomputers also use small magnetic tapes and floppy disks for off line secondary storage.

Workstation : -

A workstation is a powerful desktop computer which has mathematical and graphics processing capability. Workstations are mostly used by engineers, architects, and another professionals who need detailed graphic displays. For example, in designing machine parts, on the basis of which technical capability of the part is measured and suitable amendments are made for finalising design.

Workstation are also called as supermicros because they look like microcomputers but the chips inside make the difference between the two. Most workstation use reduced instruction set computer (RISC) microprocessor.

Operating System

2011-06-15T08:59:00.000-07:00

In order to operate computer, besides hardware and software we need something special, which can allow computer users to interact with computer is called as "operating system". In other terms, we can say that an operating system is a broker that acts as an intermidiatry between user of the computer and the hardware.
The operating syatem as a disk manager performs following activities :
* Free space management
* Stroage allocation
* Disk scheduling
* Storage deallocation

There are many type of operating system:-

1. Batch operating system
2. Multi programming system
3. Time sharing system
4. Real time operating system
5. Multi processor operating system
6. Distributed Operating system

Batch operating system : -

This form of operating system was used in the earlier age. This system was developed when magnetic tapes were used for loading and unloading of the program. In this operating system, the programs were executed in a sequential fashion in batches. Suppose we recieve 3 programs A, B and C where A is a FORTRAN program, B is a basic program and C is FORTRAN program. Then, as a part of early system, there will be loading and unloading time for basic interpreter and running the object code and again there will be loading and unloading time for FORTRAN compiler and running of the object code etc.

Multiprogramming system : -

Initially only one program was under execution, But with the advent of new methods and spooling, it was possible to keep more than one program into the main memory. This resulted into multi programming operating system. In this type of operating system, more than one program will reside into main memory.
The multi programming system has problem related with debugging and also loading of software libraies in anticipation for user. This resulted into a new technology, called as time sharing system, which is logical extension of multi programming. Example of operating systems which support multi programming are UNIX,WINDOWS 98 etc.

Time sharing system : -

Multi programmed batch system provide an enviorment, where various system resources (like CPU,memory,I/O devices) were effectively utilised. In this time sharing system, the time of cpu is shared between multiple programs residing in the main memory. multiple jobs are executed by the CPU, switching between them, but the switch occurs so frequently that the user may not interact with other programs simultaneously while it is running. Example of time sharing operating system are multics,cal,UNIX etc.

Real time operating system : -

Real time operating system is a special purpose operating system designed for rigid time requirments on the operation of the processor or flow of data. real time operating system has well defined fixed time constraints.
These type of operating systems are used in process Industry, where a delay in action may result into serious action. One of the simple examples is power plant, chemical industry etc. Example is TOSDIC of toshiba system.`.

Multiprocessor operating system : -

As the name indicates, this is an operating system where more than one process is active at atime. For a multi-processing system, multi programming is very essential. Multi Processing system can be symmetric or asymmetric. If it is a symmetric multi processing, then each processor run on same operating system, whereas in case of asymmetric multi processing, each processor is assigned a specific task and thus operating system may differ.

Distributed system : -

Here, each processor has it's own local memory and clock, communicate to other processor through communication each processor lines, such as high speed buses ,telephone line, VSAT etc. That is why sometime distributed system are also called as loosely coupled system. The main reasons for building of distributed system are computation speed up, Resource sharing, Reliability etc.

Software Development Life Cycle(SWDLC)

2011-06-14T10:32:00.000-07:00

Introduction : -

A software Development life cycle (SWDLC) is an abstract representation of gradual development and evolution of the software the undergoes a series of sequential or concurrent step of the sowtware development process. Each of these steps in the development of a software product which may be either a minor oe major component of the software system in contribution to the completion of the system.

The sofyware development life cycle consist of following steps.

Requirement analysis--> Design-->Coding-->Module level testing-->

Integration and system testing-->Delivery, Implementation and maintenance

1. Requirement analysis : -

This step is the first and primary step of software development life cycle which analyzes the requirment of the software. It is performed after the feasibility study has been done. The requirment term in this concern can be understood as : -

* A condition or capability needed bya customer to solve a problem,and.

* A condition or capability that must be met by a system, software, document, manual,report etc.

Design : -

This step is devided into two level designing named as, preliminary designhigh level design and detailed design or low level design.

premilinary design concern the brief overview of the software architecture and structure rather than goes into the details of the modules in detail in the detailed design. As the result of this step, it produces the software design specification(SDS) SDS is built to have.

* A software architecture in the layered sequential layout

* Data structure, algorithums,control structure

* The interfaces required for the software, and,

* The satisfaction that requirments have been met in the design.

Coding : -

This is the phase that produces the actual code that will be delivered to the customer as the operational product. To develop the code, a specific progrmming language is chosen either through its features or directly specified by the customer.

Module level Testing : -

Individual developed modules are tested here. It is also called as the unit testing. The testing is performed for each of the module separately.

Integration and system designing : -

All the modules are collected and integrated appropriately with each other. Interface are provided among them, and then the whole system is tested fully.

Delivery, implementation and maintenance : -

Once the complete system is tested then that system is delivered to the customer who will implement it on its organisation site. After delivery, any modification or changes can be made to help in maintenance.

This is the complete software development life cycle. This is the basic general process which is followed to develop each software product.

System Development Life Cycle -2

2011-06-13T07:29:00.000-07:00

Analysis : -

when the feasibility study is completed and the control mechanism is in place, the project team concentrates on the analysis part.

" Analysis is a detailed study of the various operations performed by a system and their relationship with in and out side of the system"

1. Define the scope of the new system.

2. Understand the old information system.

3. Analyse the current system to find the deficiencies in it.

4. Develop the structured functional specification for the new system.

5. Review the feasibility and cost benefit analysis.

A key prossblem in this phase is - what must be done to solve the problem?

Design : -

System design is the determination of the processes and data that are required by a new system. When the system is computer-based, the design can include a specification of the types of equipment to be used. so, it can said that:

The degign describes a final system and the process by which it is developed. If refers to the technical specification that will be applied in implementing the system.

Implementation and testing : -

After developing the code (or manufacturing) of the system, it enters into the implementation and testing phase. The implementation phase is less creative than the system design. it is primarily concerned with user training, site preparationand file conversion. It is defined as :

Implementation is theacquisition and integration of the physical and conceptual resources that produce a working system.

Additionally, the final testing of the complete system is performed to user satisfication and supervision of the initial operation of the new system. During the final testing, user acceptance is tested, followed by user training.

Maintenance : -

Once the system has settled down and been running for some time, the system analyst may be involved in amendment of procedures to adapt the system to changing conditions, in auditing the system to check thast the stated objectives of system are still valid in the present enviorment and in evaluating the achivement of those objectives. So, periodic maintenance of hardware and software are required.

Review and Evolution : -

A review is conducted whether the system objectives are being met with the user requirments and what are the problems in the smooth running. Step are taken to resolve them. This is an audit by the designer for improvements through test data and audit trails.

Each organisation adopts its own apporach to system development and the apporach will be defined in its data processing standards. For example, Some data procssing departments will merge the initial and detailed studies together into an investigation and outline design phase which includes an assessment of feasibility; other will not bother about feasibility in certain circumstances. During investigation, ideas for improvements and redesign will emerge and during detailed design, a return to the user department will often be necessary.

System Development Life Cycle -1

2011-06-11T22:17:00.000-07:00

System development life cycle is also known as the system life cycle, problem-solving cycle, system development cycle, system development process and system study.Perheps,the simplest view of this life cycle is a sequence of tasks, an apporach that was used in the early days of developing computer based system.

A system development life cycle is the evolutionary process that is followed in implementing a computer-based system or subsystem. A system development life cycle is a framework consisting of a series of various different tasks to achieve the specific centralized objective in the development of a system. SDLC is an application of the systems apporach to the task of developing and using computer-based system. As such the SDLC is a methodology but its pattern is being influenced by their need to develop the system more quickly.

Various phase of SDLC : -

The system development life cycle consist of seven major phases :

(a) Preliminary Assessment

(b) Feasibility study

(d) Design

(e) Implementation and testing

(f) Maintenance

(g) Review and evolution

Preliminary Assessment : -

The first phase of any project is the preliminary assessment. The base of this phase is recognition of needs for improving an information system or a procedure. This need leads to a preliminary survey or initial investigation to determine whether an alternative system can solve the problem. This brief investigation of the system underconsideration will be provided to the organizations streeing team and any project team, a set of items of reference for more detailed work.

There are various external and internal sources to be described , as given below :

1. Goverment polices,rules and regulation sometime lead to change some important procedures, some format etc.

2. Consumer can given their feedbacks about the existing systems and want to change such by a new system.

3. unions like the union of truck divers want some type modification.

4. The market competitionarises suddenly and now it is essentially required to modigy or replace the exesting system to include new hardwares, software, technology etc.

Internal Sources

1. Organization itself wants to add some advanced techonology to modify the existing applications or to make an improvement in it, like an organization acquires another organization.

2. Top management can also reuire the changes, like related to the cost.

3. User factors also sometimes require the change, like for any risk and potential returns.

4. Even the investigator himself (system analyst) may require it.

Feasibility Study: -

As a initial investigation is completed, it leads to a more detailed investigation of the system the conclusons of the initial study become the inputs for the detailed study feasibility study is called like because as in the first phase, we just check briefly about the problems related to the old system. Feasibility study can be defined as:-

Feasibility Study is test of a system proposal according to its workablity, impect on the organization, ablity to meet user needs , and effective use of resources. The task of this phase should clearly define:

1. The users demonstrable needs .

2. Availability of resources.

3. Estimate the resources required.

4. Impact of the system.

5. Define and document in outline proposed system.

System Analysis

2011-06-10T08:48:00.000-07:00

The basic objective of system analysis is to determine the feasibility of a system, and how it will meet the requirments of system users. Though in a typical system development life cycle, these activities among different teams having members with specialisation in different fields. A system analyst is an information system expert having intensive knowledge of computer hardware and software. His major functions are defining requirments, gathering data, analysing data, drawing up system specification, designing system, and testing system. System analysis involves the following aspects of system development :

1. Feasibility study
2. Requirment analysis
3. Structure analysis

Feasibility study : -

Feasibility study is the process of determining whether a system is appropriate in the context of organizational resources and constraints and meets the user requirments. The basic objectives of the feasible study are to identify whether the proposed system is feasible and will be more appropiate than the existing system, At this stage, the system development team defines the problems or opportunities, establishes feasibility study covers economit feasibility technical feasibilty, operational feasibility, and legal feasibility. There are many types of feasibility study : -

1. Economical feasibility : -

Economical feasibility involves determination of whether the given system is economically viable. it is done through cost/ benifit analysis to identify whether the benifits must be more than the cost.

2. Technical feasibility : -

Technical feasibility analyses whether the proposed system is technically viable with the available hardware, software and resources.

3. Operational feasibility : -

Operational feasibility, also known as behavioural feasibility, determines whether the proposed system will work effectively within the exisiting managerial and organisational frameworks. It is a comman phenomenon that computer installations have something to do with transfer, retraining and job status of employees.

4. Legal feasibility : -

Legal feasibility tries to ensure whether the new system meets the requirments of various information technology regulation , such as privacy laws, computer crimie law, malicious access to data, international law, etc.

STEP IN FEASIBILITY STUDY : -

1. Constitution of a project team
2. Identification of potential candidates systems
3. Identification of characteristics of candidates system
4. Performance and cost evaluation
5. Weighing system performance and cost data
6. Selection of the best system
7. Preparation of feasibility report

Requirment analysis : -

Requirment analysis is the most crucial stage of system analysis in which an analysis is done about who requires what information in what form and when. These three We are very important aspects because a system is meant for it s users and not for designer and operators. REquirment analysis define the scope of the system and the functions it is expected to perform. if the system is not designed according to information requirments, it will fail to achieve its objective inspite of choosing the best system. The system development team may use a variety of tools to identify the requirments-procedures and form used, on-site observation, interviews, questionnaires, and system used in other similar organizations.

1.Procedures and forms used : -

Every organisation uses certain procedures and forms i performing different functions. A procedure is a series of related tasks that make up the ohronological sequence and the established way of performing the work to be accomplished. If an organisation has adopted the policy of formalisation, various procedures are codified in a procedure manual. An organisation uses different types of forms for conducting its operation. Printed forms are widely used for capturing and providing information.

2. On-site observation : -

Another method of gethering information for analysis in on-site observation.
It is the process of recognising and nothing people. Object and occurrences to obtain information. The anlyst's role is that of information seeker and he is expected to be detached from the system being observed.

3. interview : -

information can be collected about the likely requirments through the personal interviews. interview is a formal, in-depth conservation conducted to gather information about how the present systems work and what modification are required in them. Interviews can be used for two main purposes-as an exploratory devise to identify relations or verify information and to capture information as it exist.

4. Questionnaires : -

A questionnaire is a formalised written schedule containing different question relevant to the object being studied. It obtains and records specified and relevant information with tolerable accuracy and completeness. A questionnaire can be directly administered by the analyst himself and gets the questionnaire filled himself on the basis of information provided by the respodent or can be adminisred indirectly by requesting the respondent to fill up the questionnaire.

5. System used in other organisation : -

When the organisation for which a system is being developed, does not have specific and methodological systems, information can be collected by studying the system of the similar nature. Information about such system can be gathered from professional journals, consulants, reports, and other publications.

Structured analysis : -

In analysing the present system and likely future requirments of the proposed system, the analyst collects a great deal od relatively unstructured data through procedure manuals, interviews, questionnaires, and other sources. The traditional apporach is to organise and convert the data through system flowcharts which support future development of the system and simplify communication with the users. Structured analysis has the following features :
1. Structured analysis is graphic that presents a picyure of what is being specified and is a conceptually easy-to-understand presentation of the application.
2.The process used in structured analysis is partitioned so that a clear picture of progression from general to specific in the system flow emerges.
3. Structured analysis is logical rather than physical. it specifies in a precise, consine, and highly readable manner the working of the system.
4. in structures analysis, certain tasks that are normally carried out late in the system development are undertaken at the analysis phase. For example, user procedures are documented during analysis rather than ins design or implementtation phase.

Motion Specification In Computer Animation

2011-06-08T08:53:00.000-07:00

There are several ways in which the motions of objects can be specified in an animation system. We can define motion in very explicit tems, or We can use more abstract or more general approaches.

Direct motion specification : -

The most straightforward method for defining a motion sequence is direct specification of the motion paremeters. Here, We explicitly give the rotation angles and translation vectors. Then the geometric transformation matrices are applied to transform co-ordinate positions. Alternatively, We could use an approximating equation to specify certain kinds of motions. These methods can be used for simple user programmed animation sequencs.

Goal-directed systems : -

At the opposite extreme, We can specify the motions that are to take place in general terms that abstractly describe the actions. these systems are referred to as goal directed because they determine specific motion parameters given the goals of the animation. For example, We could specify that we want an object to "walk " or to "run" to a particular destination. Or We could state that we want an object to "pick up " some other specified object. The inpute directive are then interpreted in term of component motions that will accomplish the selected task. Human motion, for instance, can be defined as a heirarchical structure of sub motion for the toros, limbs,and so forth.

Kinematics and dynemics : -

We can also construct animation sequences using kinematic or dynemic descriptions. With a kinematic description, we specify the animation by giving motion parameters position, velocity, and acceleration) without reference to the forces that cause the motion. for constant velocity (zero acceleration), we designate the motions of rigid bodies in a scene by giving an initial position and velocity vector for each objects.

An alternate apporach is to use inverse kinematics. Here, we specify the initial and final positions of objects at specified times and the motion parameters are computed by the system . For example, assuming zero acceleration , we can determine the constant velocity that will accomplish the movement of an object from the initial position to the final position.

Dynamic descriptions on the other hand, require the specification of the forces that produce the velocities and acceleration. Descriptions of object behavior under the are generally referred to as a physically based modeling. Example of forces affecting object motion include electromagnetic, gravitational, friction, and other mechanical forces.

Object motion are obtained from the forces equations describing physical laws, such as newton's law of motion for gravitational ang friction processes, euler or navier-stokes equations describing fluid flow, and maxwell 's equations for electromagnetic forces. For example, the general form os newton's second law for a particle of mass m is
F = d(mv)/dt

with F as the force vector, and v as the velocity vector. If mass is constant, we solve the equation F=ma, where a is the acceleration vector. otherwise, mass is a function of time, as in relativistic motions of space vehicles that consume measurable amounts of fuel per unit time. We can also use inverse dynemics to obtain the forces, given the initial and final positions of objects and the type of motion.

Application of physically based modeling include complex rigid-body systems and such nonrigid systems as cloth and plastic materials. Typically, numerical methods are used to obtain the motion parameters incrementally from the dynemical equations using initial conditions or boundary values.

COMPUTER ANIMATION LANGUAGES

2011-06-07T08:12:00.000-07:00

Languages:

Design and control of animation sequences are handled with a set of animation outlines.A general purpose language, such as c,lips,pascal,or fortran, is often used to program the animation functions, but several specialized animation languages have been developed. Animation functions include a graphics editor, a key frame generator, an in-between generator,and standard graphics routines. The graphics editor allows us to design and modify object shapes, using spline surface, constractive solid geometry methods, or other representation schemes.

A typical task in an animation specification is scene description.This includes the positioning of objects and light sources, defining the photometric parameters, and setting the camera parameters (position, orientation, and less characteristics). Another standard function is action specification. This involves the layout of motion paths for the object and camera. And we need the usual graphics routines: viewing and perspective transformations, geometric transformations to generate object movements as a function of accelerations or kinematic path specification, visible-surface identification, and the surface rendering operations.

key-frame systems are specialized animation languages designed simply to generate the in betweens from the user-specified key frames. Usually , each object in the scene is defined as a set of rigid bodies connected at the joints and with a limited number of degrees of freedom.

Parameterized systems allows object motion characterstics to be specified as part of the object definitions. The adjustable parameters control such object characteristics as degree of freedom, motion limitations, and allowable shape changes.

Scripting systems allows object specifications and animation sequences to be define with a user-input script. from the script, a library of various objects and motions can be constructed.

The Computer-Animation Process:

Half of the process of creating a computer-animated features films has nothing to do with computers. First, the filmmakers write a treatment, which is a roughly sketch of the stories. When they have settled on all of the story beats -- major plot points -- they are ready to create a storyboard of the films. The storyboard is a 2-D, comics-books-style rendering of each scene in the movie along with some jokes and snippets of important dialogues . During the storyboarding processes, the script is polished and the film makers can start to look how the scenes will work visually.

The next steps is to have the voice actors come in and records all of their lines. Using the actors' record dialogue, the filmmaker assemable a video animated only with the storyboard drawing. After further re-writing,editing, and re-recording of dialogues, the real animations are ready to begin.

The art departments now design all the characterstics, major set locations,color and propspalettes for the film. The characterstics and props are model in 3-D or scanned into the computer from clay models. Each character is equipped with hundreds of avars, little hinges that allow the animators to move specific parts of the characters body. Woody from 'Toy Story' for examples, had over 100 avars on his face alone.

The next steps is to create all of the 3-D set, painstakingly dressed with all of the detail that brings the virtual world to life. Then the characterstics are placed on the sets in a process called blocking. The director and lead animators block the key character position and camera angle for each and every shot of the movies.

Now team of animator is each assigned short snippet of scenes.They take the blocking instruction and create their own more detail key frame. They begin tweening process. The computer handle a lot of the interpolation -- calculating the best way to tween two key frame -- but the artist often has to tweak the result so they look even more lifelike.

Now the characterstics and props are given surface texture and colors. They are dressed with clothing that wrinkles and flow naturally with body movement, hair and fur that waves in the virtual breeze, and skin that look real enough to touch.

The final steps of the process are called rendering. Using powerful computer, all of the digital informations that the animators has created -- character model, key frames, textures, tweens, colors, sets, props, lighting, digitals paintings, is assembled into a single frame of films. Even with the incredible computing power of a companies. it take an average of six hours to render one frames of an animated films . That is over 88 years of rendering for a 90-minutes film.

Computer Animation

2011-06-05T11:39:00.000-07:00

What is Computer Animation ?

Computer animation follow the same formats by filming a sequence of painted cells then using more layers, keyframes, and tweening techniques. Layers provide the capabilities to place one image on top of another and to allows all or part of the under lying images show through. This capability allow you to maintained registration between multiple frames of animation and to look how various images in an animation go together.Registration are crucial concept in computer animation. Registration point let you know whether your layers are combined. When you work with Macromedia Freehand, Adobe Illustrator, or another programs that support to layers, you can copy and paste the registration points into every layer in the drawings so that points exactly overlap. On the computer, paint is most filled or drawn with tools using features such as gradients and anti-aliasing (soft gray edges that the make lines appear smooths). The word
inks, in computer animations terminology, usually means special methods for computing RGB (Red, Green, Blue) pixel values, providing edge detection, and layering so that images can blend or otherwise mix their colors to produce special transparency,inversions, and effects.

Computer animation generally refers to any time sequence of visual changes in a scene.In adddition to changig object position with translations or rotations , a computer - generated animatiion could diplay time variations in object size , color, transparency, or surface texture . Advertising animation often transiton one object shape into another for example, transformaing a can of motor oil into a automobile engien . computer animation can also be generated by changing camera parameters, such as position , orientation, and focal length. And we can produce computer animations by changing lighting effect or other parameter and procedures associated with illumination and rendering.Many applications of computer animation requried realistic display.

Design of Animation Sequences:

1. Storyboard layout
2. Object definition
3. Key - frame specifications
4. Generation of in- between frames

The storyboard is an outline of the action. It defines the montion sequence as a set of basic events that are to take place .Depending on the type of animation to be produeced , the storyboard could consist of a set of rough sketces or it could be a list of the basic ideas for the motion.

An object definition is given for each participant in the action . Object can be defined in terms of basic shapas, such as polygons or splines In addition , the associated movements for each object are specified along with shape.

A key frame are detailed drawing of the scene at a certain time in the animation sequence. Within each key frame , each object is positioned according to the time for that frame.Some key frames are chosen at extreme positions in the action; others are spaced so that the time interval between key frame is not too great.

In betweens are the intermeiate frames between the key frames . The number of in - betweens needed is determined by the media to be used to display the animation .Film requires 24 frames per second, and graphics terminals are refreshed at the rate of 30 to 60 frames per second .

General Computer Animation Functions:

Some steps in development of animation sequence are well - suited to computer solution . These include object manipulation and rendering camera motions, and the generation of in - betweens.
One function available in animation packages is provided to store and manage the object database. Object shapes and associated parameters are stores and updated in the database.Other object functions include those for motion generation and thosefor object renderingg. Motion can be generated according to specified constraints using two dimensional or three dimensional transformations.

Another typical function simulates cammera movements . Standard motions are zooming , panning , and tilting.

Computer Graphics Software

2011-06-03T10:24:00.000-07:00

The graphics application interface code is the frist kind of software that requried to translate the parts of an object that understood by the computer system. These application programs used the subroutline or function to traslation , rotation, projection, Clipping and other operation that perform on the image. Initial it is very typical one application program developed image display on the other hardwere and application requried some changes.

Standard Software:

The standard software requried to provide flexibility or portability of graphics system. When any package used standard . Without standard , program designed to one hardware system can not be transfered to another system without rewriting the program.

Graphics kernel system :

The frist standard graphics software that adopted was GKS, This wasdeveloped intiallay 2D graphics.Further its 3D version,Frist its provide real protability of software among different hardware system second is that no other package provied the aility to write device independed graphics program.

PHIGS (Programmer's Hierarchical Interactive Standard):

This is the second software standard that was proved by standard orgnisation which is extension of GKS.as example- POPen_phigs(), Pclose_phigs() etc.

DXF file format:

Drawings Interchange Format (DXF) is one of most important grapics data exchange format. It is widely used in AUTO CAD drawing software's.DXF file is normally an ASCLL readable text file which consist of seven major sections: header,table , block, classes, object.end of file.

IGES file format:

The initial Graphic Exchange Specification (IDES) file format also use in CAD softwere charateristics of CAD data,annotation and orgnisation of data between various vector oriented application like CAD software , Reverse Engineering .

Intrgration of Graphics Standard:

- Application interface
- Device interface
- user Interface

There are standard available for these interface and connection between these are-

1. The standard for graphics programming (GKS,gksed,phigs)
2. The interface to the device driver and to the devices level graphics commends or command library.
3. Graphics level archive and interchange (CGM, CGI,VGI)
4. The data communication interface between different system or between a system and the commercial database being used (IGES,STEP ,etc)

Input Device :

Various type of input device available in the market that used in graphics workstation .

1. Stroke : the devices that returned the coordinate position (x,y) . As like of digitizer that return the (x,y) position on the click of button. A mouse , Joystick touch pad can be programmed to send the coordinate position.

2. Locator : All the devices that return coordinate position on the graphics display continuously as they move called locator devices as mouse. Joystick,3D mouse.

3. string : The device that input text to the CPU as like keyboard.

Graphical Devices

2011-06-02T10:50:00.000-07:00

Introduction:
The Graphics system are used to display picture with fast interactive response . so that it is basically needs two things first hardware and second software , hardware includes all type of hard ware as input. out and process. The standard input device that used in computer graphics system are as:
1. Alphanumeric Key Board.
2. Multimedia key board or programmed key
3. Mouse / Track Ball / Track space.
4. Scanner system (OCR,OMR,MICR,BCR)
5. Light pen
6. Digitizer
7. Joystick
8. Data Glove
9. Touch Screen
10. Voice System(microphone
11. Web Cam

Standard output devices as:
1. Monitor
2. Printer
3. Plotter
4. Sound System

Raster Scan Display :
To maintaining the picture display on the CRT screen use a special technique that called Raster scan display.
Horizontal retrace : When electron beam move across the row and one row to another row is called Horizontal retrace.
Vertical retrace: When electron beam move across the screen vertically and at last reach the bottom of the screen then electron beam set the top row of the screen this jump is called vertical retrace.

Color CRT Monitor :

A CRT monitor display color picture by using the combination of different type of phosphor that emit different type color light.
(1) Beam penetration method
(2) shadow mask method

(1) Beam penetration Method:
The Beam Penetration method displaying color picture has been used with random scan monitor.CRT screen coated by two layer of phosphor usually red and green.This method is very easy to implement but have some disadvantage it can display maximum color .

(2) shadow mask method
CRT screen coated the set of three dot of color phosphor respectively red . green 7 blue phosphor dot in triangular shape, It have three electron guns.

Composite CRT Monitor :

direct View Storage Tube (DVST)
Flat Panel display
Plasma Panel
Thin -Film electroluminescent display
LED display
Liquid Crystal display device

Computer Grapics

2011-05-31T10:15:00.000-07:00

Introduction:
Today all person know about graphics thay is used in real life. But graphics technology how can work we understand about typical things that use by computer graphics.
The graphics technology used to represent your view or idea in pictorial format so that easy
to understand but how can we implement graphics device. These all are we study under the computer
grapics topic.
Many computer application packages that used to design graphics as print,Auto CAD,Maya,Photoshop
etc. How can they design the graphics or image we study all things.
Basically computer graphics devided into three branches as:
1. Generative computer graphics
2. Image processing
3. Image analysis
Image is any design first of process using image processing branch then implemented on the
device using generative computer graphics branch. Same as image analysis used to implemented
every things else. Graphics or image that we can design or made on the two plans 2D or 3D.
2 Dimentional graphics plane have only x and y direction where as 3Dimentional graphics plane
has x,y and z direction.

Application Area of the computer graphics : -
today computer graphics used in a each and every field some of the major application areas these mansion below:

1. Building Design and constraction :
Computer graphics are very useful to making the design of a building and can easily made by a
Architects. Architects make different type of design of a building and can show different views of the
building that are useful to convance the customer. Also modify according to user or constructor
requirment.

2. Circuit Designing :
Today many companies are used computer to make a different type of electronic circuit and check
it functionality,performance,durability according to used electronic equipments, take the print out on hard copy that used to manufacturing of the electronic device.

3. Mechanical drawing :
We know that mechanical are very complex arrangement of mechanical part. At the present time computer are used to drawing a typical machine parts and its alingment before manufacturing the machanical part engineer fully satisfy with the design part using instruction, implimentations,on the computer. The all machanical drawing application are called CAD programs that means computer aided design.

4. Presentation graphics area :
Another major application presentation that used to illustrate the report by the graphical presentation using slide or projector or computer slides. Presentation graphics commanly used to summarize the financial,mathematical,statistical,scientific economic
observation,voting,choices data for research report using attraction graphics image as charts,tables,etc.

5. Computer Art :
Computer graphics methods are commanly used to create attractive and commercial computer arts as an example designing of any texture using with different color arrengement and implies on the cloth that make a new
style of wearing cloth. Many type of designing devices are used to create attractive art as light pen style,mouse,digitizer,graphices table etc. and many packages are used to create different type image as photoshop,coral
draw,desktop publishing and animation packages etc.

6. Entertainment, animation and games :
Computer are used to making cartonds,animation films,special effects introduced in the movies. Carton films as tom and jerry etc. Animated films as hanuman,krishna etc.
Computer commanly used as entertaining device for playing the animated games that do the entertain and increase the knowledege of childs about the specific game such as chess, cricket,cards etc.

7. Aerospace industry :
Aircraft designer are used computer to design a aeroplane using the measurement of the wings,seating capacity maximum safe height. It is design by super computer as CRAY, or ETA etc.

8. Medical Application :
Today Doctors are mostly used the computer based devices for beter treatment of the patient because computerise information more accurate and used to find out direct any desease on the basis of symptoms. Mostly Medical Report are generated in the form of graphics using computerise devices as Ct-scan,CAT,MRI,ECG,DNA TEST,micro testing,sonography,endoscopy etc.

9. Cartography :
Computer graphics is used to produced the accurate maps of the geographical structure, nature phenomena, Density map,mine map,weather map, population map, country map, ocean map etc.

10. Scientific uses :
Super computer are used to as scientific uses such as weather forecasting, earthquake measurement, space shuttle crafting satellite launching etc.

Most Important Place Badrinath for This Summer Vacation

2011-05-20T10:44:00.000-07:00

Geography

Badrinath , peak, 23,210 ft (7,074 m) high, in the central axis of the Himalayas, Uttaranchal state, N India. The peak has several
glaciers. At a height of c.10,000 ft (3,050 m), is an 9th-century monastery and a temple to the Hindu god Shiva, a popular pilgrimage
center built by the great Indian scholar and teacher Sjavascript:void(0)hankara.

About Badrinath Dham

One of the most celebrated pilgrim spots in the country, it plays host to the famous
Badrinath Temple. Legend has it that Lord Vishnu came to the area, called ‘Badri Van’"Badrinath
Dham” Guarded on either side by the two mountains Nar and Narayan, the Neelkanth Peak provides
a splendid backdrop to Badrinath, one of the ‘Four Dhams’. One of the most celebrated pilgrim
spots in the country, it plays host to the famous Badrinath Temple.

The Garhwal Himalayas has some of the most beautiful scenery in the world . Snow capped
peaks,misty mountains, green valleys, gushing rivers,(deodar) forests, grassy slopes, abundant
flowers and an amazing array of birds and butterflies all of which combine to make this place one
of the most charming spots on this planet. It is also one of the holiest places on earth.

The most important ones amongst these are Kubera, the God of Wealth,and Ganesha, the God of Wisdom and Prosperity.
Within the temple complex is an another shrine dedicated to Laksmi,the Goddess of Fortune. This
shrine is situated to the left of the main temple building. The front portion is painted in red.
Outside the exit door of the Badrinath Temple is the seating place of Shankaracharya,who meditated
here. The temple remains closed during winter.

History of Badrinath Temple

The Badrinath Temple is dedicated to Vishnu (Preserver in the Hindu Trinity of Creator-
Preserver-Destroyer). The presiding deity of the temple is Badrinath(another form of Vishnu),
also called Badri Vishal or Badrinarayan. Shankaracharya is believed to have installed the deity
inside the shrine after it was thrown into the Narada Kunda (a hot water spring near the temple)
in the days of Buddhist ascendancy.

Badrinath is depicted sitting in the padmasana (‘lotus posture’),in which the feet are
placed on opposite thighs. He is surrounded by a host of gods.

Place to visit in Badrinath

Bhavishya Badri : The temple of Bhavishya Badri is at an elevation 3641 m, and is surrounded
by dense forests. It is located at Subain near Tapovan, about 17 km east of Joshimath on Joshimath-
Lata Malari route. Pilgrims have to trek beyond Tapovan, up the Dhauliganga river.

Narad Kund : A recess in the river, near Tapt Kund, forming a pool from where the Badrinath
idol was recovered.

Charanpaduka : 3 km away is a beautiful meadow carpeted with wild flowers in the summer.Here is a
boulder bearing the footprints of Lord Vishnu. It is said that when Lord Vishnu descended from
Vaikunth (the heavenly abode of Lord Vishnu) he stepped on this boulder.The area is a steep climb
from the town and is full of caves & boulders

Pilgrimage:

Located only a few kilometers from the Indo-China (Tibet) border, Badrinath is generally
a two-day-long journey from either Kedarnath, the site that precedes it in the Char Dham circuit,
or one of the main disembarkation points on the plains. Hemkund Sahib, an important Sikh pilgrimage site, is on the way to Badrinath, so the road is especially crowded during the
summer pilgrimage season.

Making Financial Year Function In SQL Server

2011-05-11T09:08:00.000-07:00

Hi,

Many times we required to add financial year with our invoice or po number to make it suitable for client as like PO/2011-12/04/001 here 2011-12 is current financial year. For this purpose we should make a function for getting current financial year, which can be used in insert update or select statement.

Here is a function which returns financial year as varchar for the given datetime or we can use getdate() function for getting current date financial year.

CREATE FUNCTION [dbo].[FinencialYear]
(@Date DATETIME)
RETURNS VARCHAR(7) AS
BEGIN
DECLARE @RetVal varchar(7)
Declare @Month int
Declare @Year int
Select @Month=Month(@Date)
Select @Year=Year(@Date)
-- Assuming that the financial year is starting from april
if @Month>3
Begin
Set @RetVal=cast(@Year As varchar(10))+'-'+cast(right('0' + rtrim(@Year+1),2) as varchar(2))
End
Else
Begin
Set @RetVal=cast(@Year-1 as varchar(10))+'-'+cast(right('0' + rtrim(@Year),2) as varchar(2));
End
Return @RetVal
End

We can use this function as ordinary function as Select dbo.FinencialYear(getdate()) or replace getdate() with any date for which you want to get financial year.

Thanks..

Command Object And Methods Provided By Command Object

2011-03-24T09:24:00.000-07:00

They are used to connect object to Datareader or dataset .Following are the methods provided by command object :-

1. EcecuteNonQuery :- Executes the command defined in the CommandText property against the connection defined in the Connection property for a query that does not return any row (an UPDATE, DELETE or INSERT). Returns an integer value indicating the number of rows affected by the query.

2. ExecuteReader :- Executes the command which is defined in the CommandText property against the connection defined in the Connection property. Returns a "reader" object which is connected to the resulting rowset within the database, allowing the rows to be retrieved.

3. ExecuteScalar :- Executes the command which is defined in the CommandText property against the connection defined in the Connection property. Returns only a single value (effectively the first column of the first row of the resulting rowset) any other returned columns and rows are discarded. It is fast and efficient when only a single value is required.

What Is The Difference Between Server.Transfer And Response.Redirect

2011-02-22T23:59:00.000-08:00

Following are the major difference between them :-

1. Response.Redirect sends a message to the browser saying it to move to some different page, while Server.Transfer does not send message to the browser but rather redirects the user directly from the server itself. So in Server.Transfer there is no round trip while Response.Redirect has a round trip and hence puts a load on server.

2. Using Server.Transfer you can't redirect to a different from the server itself ie within website. The cross server redirect is possible only using Response.Redirect.

3. With Server.Transfer you can preserve your information.It has a parameter called as "preserveForm". So the existing query string etc. will be able in the calling page. In Response.Redirect you can maintain the state, but has lot of drawbacks.

If you are navigating within the same website use "Server.Transfer" or else go for "Response.Redirect"

Thanks..

What Is Three Tier Architecture

2011-02-16T05:02:00.000-08:00

The three tier architecture of software emerged in the 1990s to overcome the limitation of the two tier architecture.

Thre are three layers when we talk about three tire architecture:-

User Interface (Client) :- This is mostly the windows uer interface or the web interface but this has only UI part.

Mid Layer :- Middle tier (Layer) provides process management where business logic and rules are executed and can accommodate hundreds of users ( as Compared to only 100 users with the two tier architecture) by providing functions such as queuing, application execution, and database staging.

Data Access Layer :- This is also called by famous acronym "DAL" component. It has mainly the SQL statements which do the database operation part of the job.

The three tier architecture is used when an effective distribution client/server designed is needed that provides (when compared to the two tier) increased performance, flexibility, maintainability, reusability, and scalability, while hiding the complexity of distributed processing from the user.

Thanks.

Software Maintenance

2011-02-12T07:39:00.000-08:00

Software Maintenance

The term “software maintenance” is used to describe the software engineering activities that occur following delivery of a software product to the client. The maintenance phase of software life-cycle is the time period in which a software product performs useful work.

Maintenance activity involves making enhancements to software products, adapting products to new environments, and correcting problem.

Software product enhancement may involve providing new functional capabilities, improving user displays and modes of interaction, upgrading external documents and internal documentation, or upgrading the performance characteristics of a system.

Adaptation of application to a new environment may involve moving the software to a different server. Problem correction involves modification and revalidation of software to correct errors.

The maintenance phase focuses on changes that are associated with error correction, software’s environment and enhancements due to changing customer requirements.

The maintenance phase reapplies the definition and development phases, but in the context of existing software one comes across four types of changes during the maintenance phase:

1. Correction - Even with the best quality assurance activities, customer may uncover defects in the application. Corrective maintenance corrects defects in the application.

2. Adaptation - Many times the original environment (e.g., Server, Operating system, Business rules, External product characteristics) of application may change. Adaptive maintenance modifies the application to allow changes in external environment.

3. Enhancement - As application is used, the customer/user may desire more functions that will be beneficial. Perfective maintenance extends any software beyond its original functional requirements.

4. Prevention¬ - Computer software deteriorates due to change, and so preventive maintenance, called software reengineering, conducted to enable the software to serve the needs of its end users. Basically, preventive maintenance makes changes to computer programs so that they can be more easily corrected, adaptive, and enhanced.

Thanks..

What is the namespace in which .NET has the data functionality classes ?

2011-02-03T09:33:00.000-08:00

Following are the namespaces provided by .Net for data management

System.Data : This contains the basic objects which can be used for accessing and storing relational data, such as DataSet, DataTable, and DataRelation. Each of these are independent of the type of data source and the way we connect to it.

System.Data.OleDB : It contains the objects which can be used to connect to a data source via an OLE-DB provider, such as OleDbConnection, OleDbCommand , etc. These objects are inherited from the common base classes, and so have the same properties, methods, and events as the SqlClient equivalents.

System.Data.SqlClient : This contains the objects which can be used to connect to a data source via the Tabular Data Stream (TDS) interface of Microsoft Sql Server (only). This can generally provide better performance as this removes some of the intermediate layers required by an OLE-DB connection.

System.XML : This Contains the basic objects which are required to create, read, store, write, and manipulate XML documents according to W3C recommendations.

Thanks..

What Is A Assembly & Type of It In .Net

2011-01-29T08:35:00.000-08:00

What Is A Assembly & Type of It In .Net

What Is A Assembly

1. Assembly is a unit of deployment like EXE or a DLL.

2. An Assembly consists of one or more files(dlls,exe's) and represents a group of resources,
type definition, and implementation of those types. An assembly may also contain references
to other assemblies. These resources, types and references are described in a block of data
called a manifest.

3. An assembly is a completely self-describing. An assembly contains metadata information,
which is used by the CLR for everything from type checking and security to actually invoking
the components methods.

4. Multiple versions can be deployed side by side in different folders. These different versions
can execute at the same time without interfering with each other.Assemblies can be
private or shared.

Different types of Assemblies

There are two types of assemby Private and Public assembly. A private assembly is normally
used by a single application, and is stored in the application's directory, or a sub-directory
beneath. A shared assembly is normally stored in the global assembly cache, which is a
repository of assemblies maintained ny the .NET runtime. Shared assemblies are usually
libraries of code which many applications will find useful, e.g. Crystal report classes which
will be used by all application for Reports

Thanks..

50 Common Interview Questions and Answers :

2010-12-29T20:37:00.000-08:00

Review these typical interview questions and think about how you would answer them. Read the questions listed; you can also find some tactic suggestions with it.

1. Tell me about yourself:

The most often asked question in interviews. You need to have a short statement prepared in your mind. Be careful that it does not sound rehearsed. Limit it to work-related items unless instructed otherwise. Talk about things you have done and jobs you have held that relate to the position you are interviewing for. Start with the item farthest back and work up to the present.

2. Why did you leave your last job?

Stay positive regardless of the circumstances. Never refer to a major problem with management and never speak ill of supervisors, co- workers or the organization. If you do, you will be the one looking bad. Keep smiling and talk about leaving for a positive reason such as an opportunity, a chance to do something special or other forward- looking reasons.

3. What experience do you have in this field?

Speak about specifics that relate to the position you are applying for. If you do not have specific experience, get as close as you can.

4. Do you consider yourself successful?

You should always answer yes and briefly explain why. A good explanation is that you have set goals, and you have met some and are on track to achieve the others.

5. What do co-workers say about you?

Be prepared with a quote or two from co-workers. Either a specific statement or a paraphrase will work. Jill Clark, a co-worker at Smith Company, always said I was the hardest workers she had ever known. It is as powerful as Jill having said it at the interview herself.

6. What do you know about this organization?

This question is one reason to do some research on the organization before the interview. Find out where they have been and where they are going. What are the current issues and who are the major players?

7. What have you done to improve your knowledge in the last year?

Try to include improvement activities that relate to the job. A wide range of activities can be mentioned as helpful self-improvement. Have some good ones handy to mention.

8. Are you applying for other jobs?

Be honest but do not spend a lot of time in this area. Keep the focus on this job and what you can do for this organization. Anything else is a distraction.

9. Why do you want to work for this organization?

This may take some thought and certainly, should be based on the research you have done on the organization. Sincerity is extremely important here and will easily be sensed. Relate it to your long-term career goals.

10. Do you know anyone who works for us?

Be alert of the policy on relations working for the organization. This can affect your answer even though they asked about friends not relatives. Be careful to mention a friend only if they are well thought of.

11. What kind of salary do you need?

A loaded question. A nasty little game that you will probably lose if you answer first. So, do not answer it. Instead, say something like, That's a tough question. Can you tell me the range for this position? In most cases, the interviewer, taken off guard, will tell you. If not, say that it can depend on the details of the job. Then give a wide range.

12. Are you a team player?

You are, of course, a team player. Be sure to have examples ready. Specifics that show you often perform for the good of the team rather than for yourself are good evidence of your team attitude. Do not brag, just say it in a matter-of-fact tone. This is a key point.

13. How long would you expect to work for us if hired?

Specifics here are not good. Something like this should work: I'd like it to be a long time. Or As long as we both feel I'm doing a good job.

14. Have you ever had to fire anyone? How did you feel about that?

This is serious. Do not make light of it or in any way seem like you like to fire people. At the same time, you will do it when it is the right thing to do. When it comes to the organization opposed to the person who has created a harmful situation, you will protect the organization. Remember firing is not the same as layoff or reduction in force.

15. What is your philosophy towards work?

The interviewer is not looking for a lengthy or florid thesis here. Do you have strong feelings that the job gets done? Yes. That's the type of answer that works best here. Short and positive, showing a benefit to the organization.

16. If you had enough money to retire right now, would you?

Answer yes if you would. But since you need to work, this is the type of work you prefer. Do not say yes if you do not mean it.

17. Have you ever been asked to leave a position?

If you have not, say no. If you have, be honest, brief and avoid saying negative things about the people or organization involved.

18. Explain how you would be an asset to this organization.

You should be anxious for this question. It gives you a chance to highlight your best points as they relate to the position being discussed. Give a little advance thought to this relationship.

19. Why should we hire you?

Point out how your assets meet what the organization needs. Do not mention any other candidates to make a comparison.

20. Tell me about a suggestion you have made.

Have a good one ready. Be sure and use a idea that was conventional and was then considered successful. One related to the type of work applied for is a real plus.

21. What irritates you about co-workers?

This is a trap question. Think real hard but fail to come up with anything that irritates you. A short statement that you seem to get along with folks is great.

22. What is your greatest strength?

Numerous answers are good, just stay positive. A few good example: Your skill to prioritize, Your problem-solving skills, Your ability to work under pressure, Your ability to focus on projects, Your professional expertise, Your leadership skills, Your positive attitude

23. Tell me about your dream job.

Stay away from a specific job. You cannot win. If you say the job you are contending for is it, you strain credibility. If you say another job is it, you plant the suspicion that you will be dissatisfied with this position if hired. The best is to stay genetic and say something like: A job where I love the work, like the people, can contribute and can't wait to get to work.

24. Why do you think you would do well at this job?

Give more than a few reasons and include skills, experience and interest.

25. What are you looking for in a job?

See answer # 23

26. What kind of person would you refuse to work with?

Do not be trivial. It would take unfaithfulness to the organization, violence or lawbreaking to get you to object. Minor objections will label you as a whiner.

27. What is more important to you: the money or the work?

Money is always important, but the work is the most important. There is no better answer.

28. What would your previous supervisor say your strongest point is?

There are numerous good possibilities:

Loyalty, Energy, Positive attitude, Leadership, Team player, Expertise, Initiative, Patience, Hard work, Creativity, Problem solver

29. Tell me about a problem you had with a supervisor.

Biggest trap of all. This is a test to see if you will speak ill of your boss. If you fall for it and tell about a problem with a former boss, you may well below the interview right there. Stay positive and develop a poor memory about any trouble with a supervisor.

30. What has disappointed you about a job?

Don't get trivial or negative. Safe areas are few but can include:
Not enough of a challenge. You were laid off in a reduction Company did not win a contract, which would have given you more responsibility.

31. Tell me about your ability to work under pressure.

You may say that you thrive under certain types of pressure. Give an example that relates to the type of position applied for.

32. Do your skills match this job or another job more closely?

Probably this one. Do not give fuel to the suspicion that you may want another job more than this one.

33. What motivates you to do your best on the job?

This is a personal trait that only you can say, but good examples are: Challenge, Achievement and Recognition.

34. Are you willing to work overtime? Nights? Weekends?

This is up to you. Be totally honest.

35. How would you know you were successful on this job?

Several ways are good measures:

You set high standards for yourself and meet them. Your outcomes are a success.Your boss tell you that you are successful

36. Would you be willing to relocate if required?

You should be clear on this with your family prior to the interview if you think there is a chance it may come up. Do not say yes just to get the job if the real answer is no. This can create a lot of problems later on in your career. Be honest at this point and save yourself uture grief.

37. Are you willing to put the interests of the organization ahead of your own?

This is a straight loyalty and dedication question. Do not worry about the bottomless moral and thoughtful implication. Just say yes.

38. Describe your management style.

Try to avoid labels. Some of the more common labels, like progressive, salesman or consensus, can have several meanings or descriptions depending on which management expert you listen to. The situational style is safe, because it says you will manage according to the situation, instead of one size fits all.

39. What have you learned from mistakes on the job?

Here you have to come up with something or you strain credibility. Make it small, well intentioned slip-up with a positive lesson well-read. An example would be working too far ahead of colleagues on a project and thus throwing coordination off.

40. Do you have any blind spots?

Trick question. If you know about blind spots, they are no longer blind spots. Do not reveal any personal areas of concern here. Let them do their own discovery on your bad points. Do not hand it to them.

41. If you were hiring a person for this job, what would you look for?

Be careful to mention traits that are needed and that you have.
42. Do you think you are overqualified for this position?

Regardless of your qualifications, state that you are very well qualified for the position.
43. How do you propose to compensate for your lack of experience?

First, if you have experience that the interviewer does not know about, bring that up: Then, point out (if true) that you are a hard working quick learner.
44. What qualities do you look for in a boss?

Be generic and positive. Safe qualities are knowledgeable, a sense of humor, fair, loyal to subordinates and holder of high standards. All bosses think they have these traits.

45. Tell me about a time when you helped resolve a dispute between others.

Pick a specific incident. Focus on your problem solving technique and not the dispute you complete.

46. What position do you prefer on a team working on a project?

Be honest. If you are comfortable in different roles, point that out.

47. Describe your work ethic.

Emphasize benefits to the organization. Things like, determination to get the job done and work hard but enjoy your work are good.

48. What has been your biggest professional disappointment?

Be sure that you refer to something that was beyond your control. Show acceptance and no negative feelings.

49. Tell me about the most fun you have had on the job.

Talk about having fun by accomplish a little for the association.

50. Do you have any questions for me?

Always have some questions prepared. Questions prepared where you will be an asset to the organization are good. How soon will I be able to be productive? and What type of projects will I be able to assist on? are examples.

And Finally Good Luck by www.gurukulsoftwares.com