Dr.Binary - Blaise M Crowly

[SOLUTION] HOWTO Permanently delete Facebook Account and Data

noreply@blogger.com (Anonymous) — Sat, 05 Nov 2011 10:44:00 +0000

Yes you can. Or that is what they make it feel like
here is the steps.

Delete all apps and software's that use facebook, this is to prevent accidental cancellation of deletion.
DO NOT Use sites that you have used facebook to login for 14 days from this point. you may create a different account without using FB.
Go to: https://www.facebook.com/help/contact.php?show_form=delete_account
Click Delete
Enter Password and Enter verification code.
Press Submit.
Now Most important do not try to login or operate facebook in anyway for the next 2 weeks, 14 days. Else the delete will be cancelled.

Get A life, Support Wikileaks and Anonymous.
Google+ is better.
That's all folks for now.

[SOLUTION] Not Getting SMS From Google SMS Channels | INDIA

noreply@blogger.com (Anonymous) — Tue, 25 Oct 2011 09:03:00 +0000

Welcome in Witches and Wizards
Today we will be discussing a very annoying factor that mobile users in India are facing today. First tele-marketing companies decided to use the mobile network to irritate customers by pushing in advertisements at even midnight. Then one fine morning government decided to block all of this including services that the users themselves had signed up for. The worst part, they no longer could receive Google SMS channel messages.

So here is why it's not working and the solution.

You have signed up for NATIONAL DND Service and that's why you can't get the SMS.
You did this by sending "START" or "START 0" to 1909.
Then on you no longer got google's SMS.
Reason for this is that DND blocks all commercial and service messages.
To solve this people suggest sending "START 7" "START 6" ..etc to 1909.
but the keyword start is to START BLOCKING and NOT TO STOP.
SO the solution is simple.
To start getting your messages again
SEND "STOP 6" to1909.
ATTENTION Sources ask you to message START 6 instead BUT
THIS IS NOT WORKING FOR SOME REASON ..STOP does
This will unblock all The IT, and Entertainment based Stuff. and you can have your Google SMS Channel Back.
ATTENTION: If you have signed up recently for DND then you have to wait 3 months to Make changes to setting, till then you can use another sim to get messages.
It will take upto 7 - 16 days for the update to reflect.

So That's all folks.
Se ya all next time.

How to run system commands in C++ or C

noreply@blogger.com (Anonymous) — Thu, 20 Oct 2011 17:55:00 +0000

Hello dear tech witches and wizards.

Welcome in to today's post we will be attacking a very simple question.
How do we execute system commands (DOS commands, shell commands ..etc) from a c++ or c program? This is a very common question that come up for new programmers who have finished learning the programming language and is looking forward to create something useful that can be integrated with system or some other software. So lets solve it.

The solution for this lies in the header file:

stdlib.h

So include the library file with the command #include

The function that will help us with this is:

system();

Which can be used as: system("Command Within Quotes");

So let's say if you want the system to list the files in current directory you can try:

system("dir"); //for WINDOWS

&

system("ls"); //for Linux

It is also possible to run commands stored in an array:
like

char ray[50] = "ping yahoo.com";

system(ray);

Will execute the command stored in the array.
Hope this helps some of you at some time.

That's all folks till we meet again.

[SOLUTION] gets or cin.getline skipping input

noreply@blogger.com (Anonymous) — Tue, 18 Oct 2011 10:05:00 +0000

Welcome in tech wizards and witches.

Today we will try and solve a very simple but irritating problem that nearly every programmer that has tried his hand in c++ has faced.

The gets() or cin.getline() range of functions are found to jump a input statement and continue onto the next line without taking input.

So why does this happen? Why does the program seem to skip a input statement and jump onto the next line. The reason for this is the string terminating character \0 and the difference in how gets() and cin.getline() work.

Any string is terminated by the '\0' character. When a string is entered through the keyboard the data first enters a buffer which stores the values.

So if i am entering the string "HELLO" the buffer will look like HELLO\0 (where each color represent a memory slot)

When we are using gets to get the string it takes the entire group including the \0 from the buffer and keep the buffer clean.

BUT

When we are using cin it leaves the \0 behind in the buffer making it \0

So when gets or cin.getline look for string the next time it immediately encounter the \0 and think the string is over, so it skips the input.

SOLUTION
To solve this you have to first identify where this happens.
Then just above the gets or cin.getline statement there enter the following command:

cin.ignore()

This will solve the problem.

WARNING!
ONLY USE AT PLACES WHERE THERE IS THE JUMPING PROBLEM.
Do not give the cin.ignore() function above every input statement.
Doing so will cause you to loose the first character of the input in places where you were not facing the skipping problem as it will ignore the first character of the input.

That's all folks

Till next time Good Bye

The Top 5 [POPULAR] Software You Should Never Use : Should Stop Using

noreply@blogger.com (Anonymous) — Fri, 14 Oct 2011 16:56:00 +0000

Hello Tech Witches and Wizards
Welcome in to today's cure.

There are thousands of webpages that talk about the best software to use for any cause. And some throw bad reviews about specific software that at times make us hate the entire company as a whole.
Here I am going to present to you the TOP 5 of the most popular software that one should never use or at least should consider discontinuing.

1) WINDOWS Vista

I don't think I would have to do much hard work trying to explain this, because it is as simple as "you know it if you have tried it, else you don't".
When a complete set of Hardware compatibility problems, unknown bugs, bad memory management and a group of red,blue and black screens of death that make frequent visit come together we get the worst Os ever created by Microsoft. One wonders what MS was thinking when they created this.

2) NORTON Antivirus

Once the the leaders in anti-virus technology, Norton lost its foothold over the same cause against which it was to protect systems against. Speed!
The performance of the program was irritating that users would shoot themselves due to frustration by the time they finish running a full system scan.
The effect it cased was so devastating that users would tolerate a hundred viruses that slow the system down than install this dreaded beast.
The impact of this kind of popularity is very much evident from their new sales caption "Stop Viruses, Spyware, Worms, Bots & Spam without Slowing You Down"

3) INTERNET Explorer

"The Titan of the internet technology", "The TITANIC of internet technology" I will call it. The web browser that ruled the cyberspace for about a decade only to prove to everyone that it was the worst one ever made. The extremely slow working of the software only came into notice once better products entered the market, but what was more intolerable was how the pages were rendered in the worst possible condition using 3 times the time other better rendering products would. When a few security flaws too came into notice it was high time for this titans era to end. But what stopped it from evolving into a better product. The companies policy of PROFIT FIRST, CUSTOMER SECOND or just a chance of fate.

4) REAL Player

In a quick sight, this player bring to you nothing but "Great Expectations". With its flashy GUI, shiny controls and Visualizations that pin your eye to the screen the user would expect nothing but the best. But it never was much late before the noticed that within the patched up classy skins the engine was a rusted big piece.
the player handles decoding of media as if its a golf cart cruising a war zone. The rendered of video would make even the blind cry out in pain. But what sealed the fate of this is how heavy the software was, and how it was difficult to both install and remove with out of the world activation methods.

5) QUICK Time

The unavoidable part of Mac and the Must avoid part for Windows. This diabolically scripted software not only crepes deep into the systems architecture and bite in so hard that it would take ages to uninstall it. It has the worst buffering rates and unbearable video quality making it one of the worst media players ever coded. The browser integration along with this makes the web experience a memorable one as you will never forget the painful wait for those small boxes to come up.

Software like any other product hold chances of success and failure. When the product is well engineered and well implemented it can help the creator reach the hall of fame where st times they stay even after their death. But a bad application not only brings loss to the company, but call the hate and curse of the thousands who tried out you application due to misfortune.
So code wise.. . .

Thank you
Till next time bye.

SIRI [Alternative] for ANDROID : voice-activated assistant. its been there

noreply@blogger.com (Anonymous) — Thu, 13 Oct 2011 09:15:00 +0000

Welcome is Tech Witches and Wizards

A week back two friends of mine (die hard fans of APPLE) came busting into my facebook wall as if they had become zombies and where programmed to attack my facebook wall. So what was the strange reason.

Apple's I-Phone has SIRI they say, An Artificially-intelligent software that could understand everything you tell and act per instructions without you even touching the iphone.
But they also put forward another claim, "Android don't have it"

Too bad for them that they did not even consider cusulting google and just jumped on apples advertisement.

The truth: Android has a voice activated assistant like SIRI : ok Actually it has more than one.

Its been long time since Android had these voice command recognizing tools.

if you just want to control Android with voice try.
Google Voice Actions
This is googles native voice recognition tool that can handle all Android operations but not that good with Facebook, Twitter and all those stuff.
So lets see the next.

These 2 are the ones that I would recommend the most

1) Vlingo
Vlingo Is a speech-to-text(S2T) and text-to-speech (T2S) app for Android (avilable for ios, blackberry too) that is being vigorously developed.

Send SMS and e-Mails
Make calls
Search for Local businesses (like say "Find nearest Italian restaurant" and it will get it for you).
Use it to Launch Apps in your phone (can't wait to tell "Angry Birds" :P).
Update your Facebook, Twitter or whatever.
And the amazing speech-to-text engine do not seem to be interested in making mistakes by misinterpreting words you speak, it's damn accurate.
Another amazing feature is how it gives you suggestions like: if you ask it to book a movie ticket i will get the show times and other details for you.

Vlingo in action VIDEO

2) Speak To It Assistant

This would be a more user friendlier one than Vlingo not to mention customizable, but the con of this app is that this is a pretty new app and can be a bit rough at time. Its lot better than vlingo on basis of the ability to understand language that you use to speak. eg: "Tell my friends am dead" ,tell that and it will update your facebook as "I am dead"

An animated Avatar to interact with (the default librarian is hot )
Avatar can be customized with lot of options.(male/female)
Learns you style of speaking as you use it.
Send SMS and Emails
Make calls.
Update social network status.
It can understand more words and commands than any other known voice recognition app.
Location and navigation.

In operation Video

Yah true

some of these may seem a bit crude for SIRI, but The native [Google Voice Actions]Google Voice Actions is about to see a major boost release so behold.

That's all Folks [ R64JGAYDDSUX ]

SOLUTION: Mic Not Working in UBUNTU on TOSHIBA laptop.

noreply@blogger.com (Anonymous) — Wed, 12 Oct 2011 14:26:00 +0000

Hello Tech Wizards and witches,Its been some time since I posted here but now on you can expect regular posts on multiple fields.

The issue we will be addressing and of course 'curing' will be the strange syndrome of " External or Internal Mic Not Working In Ubuntu in a laptop" I will be addressing this issue in phase to a TOSHIBA C660 running UBUNTU 10.04 Lucid Lynx as this problem is most seen in TOSHIBA laptops. SO here is the issue:

The External and Internal mic in laptop is not working. In the sense that the computer does not recognize sound from them and record the sounds given as input.

I am sorry that the method used to solve this problem gets more aching as each step pass, but as said "road to paradise is never an easy one".
So I will be guiding you step by step allowing you clear vision into each step done so that the process will be as easy as possible.

We will try to solve this in a 3 step process, the problem should be rectified in any one of these steps.

Step 1: UBUNTU - /etc/modprobe.d/alsa-base.conf Customisation

Note: You need to be able to get root (Administrator) privilege to complete any of these steps.
Open terminal by pressing Alt+F2
Enter: gnome-terminal in the text box that appear and click "Run".
You can also open the terminal from menu Accessories>Terminal.
Enter the command : sudo gedit /etc/modprobe.d/alsa-base.conf
A Text editor window will appear with the alsa-base.conf file open.
in the file look for a line that says: " options snd-hda-intel model= " something.
if it is there replace whatever is after the = with auto
Save and close the file.
Restart your computer and see if the mic is being recognized.
Congratulations if it does, else no worries move on to the next step.
|||Note: Leave settings as it is as it will support the next steps.|||

STEP 2: Pulse Audio Tweaking

Note: You will need to be the root user to install the requires software "Pulse Audio Volume Control".
You must install PulseAudio Volume Control for this.
Open terminal as in above step and run command: sudo apt-get install pavucontrol
Now go to : Menu > Sound & Video (multimedia) > PulseAudio Volume Control
Go to the configuration Tab
Select Analog Stereo Duplex or Analog Stereo Input + Analog Stereo Output as the profile.
In Output tab select Analog Speakers As your port.
Enter the input Tab.
Select Hardware Input Devices in the drop down at the bottom.
Now speak into the mic and see if it is working by watching the indicator that move.
Congratulation if it responds if it does not, and if it do not just move on to the next step. In 99% case it will get solved within the next step.
Note: Leave settings as you have set now.

STEP 3: Update ALSA driver.
I understand that this is a bit tiresome step considering the time involved and complexity, but i will try to be as newbie friendly and try to take this as smoothly as possibly I can.
Note: For this you will have to completely have root user privileges.
FOLLOW INSTRUCTIONS HERE

By the end of this final step your Mic should be running fine.
just make sure after the upgrade that the settings in the Pulse Audio Volume control is the same as said above.

That's All Folks this time.

HOWTO: Update ALSA Driver in UBUNTU

noreply@blogger.com (Anonymous) — Wed, 12 Oct 2011 14:22:00 +0000

Hello Witches and Wizards welcome back.

This time around I am going to give you a step by step tutorial to Updating the Almighty ALSA DRIVER in your UBUNTU system.
Most of the time when we setup and get the system running with linux there wont me much trouble that come with the package. But at times we have this strange sound problems that can be only solved by an upgrade.
Or maybe just you are the "Steve Jobs" kind, who seek the latest and is quick to evolve. whatever it maybe here is my guide for you to upgrade your ALSA DRIVER in your UBUNTU installation, behold and keep to the prescription.

You can check your installed version by giving these commands in terminal:

cat /proc/asound/version

Test if before and after upgrade installation.

NOTE: You need complete root privileges to achieve this upgrade successfully.
Rub your hands and get ready:
Download the required script from here: Download
Copy that file into your home directory: /home/$USER (where $USER is your username)
Open Terminal at Menu>Accessories>Terminal or Alt+f2 > enter "gnome-terminal" press ENTER.
Enter Command: cd
Enter Command: tar xzvf AlsaUpgrade-1.0.24-2.tar.gz
Enter Command: chmod +x AlsaUpgrade-1.0.24-2.sh
Ignore steps 10 and 11 if you are new or just not interested in learning the detail.
Now as the next few steps which we are going to do is a bit complex from the machine point of view (Don't get scared of, it's easy on your part). so there are a few chances, like in 1 in a 10000 that things can go wrong, so we will be logging(recording the output from system to a file) each step. good thing there are tools to do this dirty work for you.
The command that you will be using to log the process is: scrip -a -c "" (the quotes " " are important around the command). so if you want to log it you can give the command given below between the quotes and give ALSADownload.log, ALSACompile.log, ALSAinstall.log in place of in each of the below command. -d = download, -c = compile and -i = install.
Enter Command: ./AlsaUpgrade-1.0.24-2.sh -d
Enter Command: ./AlsaUpgrade-1.0.24-2.sh -c
Enter Command: ./AlsaUpgrade-1.0.24-2.sh -i
Now RESTART your computer and check if your sound Out Put and Input is working fine.
Congratulations you have just upgraded your ALSA drivers.
[ATTENTION] In case something goes terribly wrong, like sound not at all working immediately run: cd && ./AlsaUpgrade-1.0.24-2.sh -r

That's all folks.
See you again folks Till then, Good Bye.

Accept Passwords Hidden By * In C++

noreply@blogger.com (Anonymous) — Sat, 11 Sep 2010 14:01:00 +0000

A question I hear a lot, and a serious one too.
Any thing that deals with security and safety should be handled with extreme
care as it can ruin almost anything if it is at fault.

So here I Want to present you with a simple method to take in passwords for your c++ program by hiding them with a '*'.

#include

#include

void getpass(char pas[])    //pas is an character array passed to this funtion
     {

       int i=0;
       while(pas[i]!=13)     //13 is the ASCII value for ENTER, so loop till ENTER
                                        // is pressed
       {
           pas[i] = getch(); //get a character without displaying it on screen
       }

pas[i]='\0'; //marking the end of password.

}

Ok , just pass a charecter array to this function, once this function executes and ends the array that you passed will have your password.

And next time, a simple encryption tool to keep your passwords safe.

So wait..........along

HoW to set-up PhP MySQL development enviorment and develop in PhP MySql

noreply@blogger.com (Anonymous) — Tue, 22 Dec 2009 14:31:00 +0000

I would like to develop a programm (stock and accounts) for my own business. I would like to design like - a database (MySQL) and I have to enter data and get reports through a browser on my PC. I want a fully customized application to develop and to maintain for my own purpose.
I have basic programming knowledge in C, C++, VB 6.0, Foxpro 2.6, HTML. And ready to learn new things.
Now can you please suggest me, What softwares I have to download (probably open source) and learn. Already I have installed MySQL 5.0 and now I can create a database and simple SQL queries.

Thanks in advance.

----------------------

I am happy that you have specially asked for opensource tools and yes that's exactly what you should use.
so as you say that ,you are already familiar with C++ ,HTML.
This is going to be a breeze as all you have to do is combine object oriented programing, with Web technology.

these are the list of programs you will need:
Apache web server.
PhP.
MySQL. (as you have already installed it).
PhPMyAdmin (a GUI for MySQL database management, can make things easier).

I would suggest that you use a combined system like
EasyPhP or WAMP (for windows)
or
XAMPP for Linux

i recommend you export your SQL Database,and install one of these tools and then import it into MySQL.

So that you dont have to spend lot of time synchronizing all of these tools.
installing one of these single packages will take care of all the tools mentioned before.
and just follow there instructions.

So that's it,once tools are ready you will have to learn PhP Programing,
(i strongly recommend the books "PhP and MySQL bible" or "PHP For Dummies" -- or just learn from the net.)
and database accessing from PhP.( it is simple).
and then Program your software and copy it to the server directory in your system (Apache will take care of that).
then enter http://localhost
And you can watch your talents bloom.

If you are planning to make your server public, you will have to also take care of security settings.

hope that helps,
if you need any further help please contact me from tech-help page of http://blaisemcrowly.co.cc

Web safety - Stop forwarding useless mails - 10 condments of web safety

noreply@blogger.com (Anonymous) — Thu, 17 Dec 2009 10:15:00 +0000

i am writing this thing because i am tierd of explaining it to people, again and again.
you may be doing a crime when you are forwarding mails around.

I am sure you all have encountered with the rubbish mails that come with a message that say
"forward this to 100000 people or tomorrow an ant will bite you" or simply "bad luck will follow you to your grave" .
most of them come with relegious pictures , or other nonsense out of the world content.
below i am mentioning some of them.

1) A mail with a picture saying "gods eye" ( most of you must have seen it) -
    It is a nebula ( a celestial condition) AND NOT GODS EYE.
    if you want to see gods eye, look into your friend's or enemies eye.

2) Any mail claiming "I am suffering from heart from something that even doctors have not heard off
    and every time this mail is forwarded Some company with the worlds greatest idiot as the CEO
    (it hast to be if the mail is true) will pay me 500$ each" is FAKE
    no one have any advantage by you forwarding it other than some hacker or criminal.

ok that is enough examples.
now most of them may be just prank emails that cause no trouble, but how can you be sure all of them are safe.
The images that are in the mail may have internal hidden scripts that send collect your contact information
(as today, emails can have embedded and HTML content,so it is 100% possible).

the moment you forward these mails ,the details about yourselves and of the people you send it to may be transferred to
a database from where the CRIMINAL may use it for his own purposes.

You may be a Victim ALREADY:
Shocked...don't be ,because you alone are responsible for it, just take a look how many
spam messages are there in your spam folder of your email account.
all those rubbish mails, advertisements and other stuff.
where do you think they got your email ID from?
i am sure that non of you have official contacted them and said " hey buddy can you do a help and fill my mail box with rubbish"
spamers get the email ID from websites were you may have posted it of simply when of forwarded all that rubbish to me.
you are harming me and yourself.

But what when it is not just about spams, what when it comes to passwords and stuff
yes..they too can be collected.
and did you know if you cause harm to someone by email it is a punishable offence
and the victim cab ask upto a sum of 6lackhs + jail. (under Indian Law)

Tips to to stay safe ,reduce spam and not be a criminal
SO how can you stay safe: SImple.

Stop forwarding junk, that's why you have a delete button.
Never reply to mails asking for password, NO COMPANY OR EMAIL GROUP WILL ASK FOR PASSWORD BY THE MAIL.
Not forwarding may bring you bad luck, But wont put you in a criminal case.
If you get a mail saying Something has happened to someone close to you,first call that person up, he will be alright.
Hacking is no easy job, unless the a hacker does not have to hack (what is the use of hacking when you are offering your password)
You will never have to update your email account , if you get such a mail its fake

So that is it..
The 10 Commandments of web safety:
1.Stop sending rubbish, and you may be preventing a terrorist attack on your country ,you never know.
2.Stop sending rubbish, you will have your privacy.
3.Stop replying to rubbish, your path will be clean.
4.Stop responding to offers that are amazing, because they are amazingly fake.
5.Don't send hate mail, even from another Id they can be traced to you, wherever in the world you are.
6.You never win a laptop, TV,Computer ..or whatever from the web for free
(no one intelligent enough to make a website with all that HTMl code is that foolish, to give it free)
7.Search the mail subject in Snopes.com to find if it is fake.
8.Never follow links to your bank's site from a email.
9.Never meet someone whom you met online alone. let others know and select a public place.
10.Use digital signatures on your mail,and insist your friends do so.

for further details contact me from:
http://blaisemcrowly.co.cc (contact me page)

OMG .ogg voribs is not goot it's the BEST

noreply@blogger.com (Anonymous) — Tue, 15 Dec 2009 18:39:00 +0000

Here is why you should be using .OGG voribs/theora format instead of mp3,wma ..etc

When i first read about the .ogg & voribs (1 year back) i was really excited about it ( taking into account that i already was a fan of open software)
but i did not do much about it, just tried converting some .mp3s to OGG to see if the file size reduced, at times it did and sometimes it did not, just like what happen when someone diet and instead of loosing they gain.

It was 1 week before that i really took a look at it carefully when i was in a situation were i wanted a audio file to be converted into the elast possible size but with minimum quality loss.
like a parrot that is trained to repeat what is said ,my grey cells cried immediately Mp3 ..Mp3.. Mp3..
and i set to work, I took a 1minute (1.8MB 128kbps) file so i could test it before i do the complete conversion.

I started of encoding and i slowly discovered something great.

below is the conditions and properties of each file.

FORMAT|   BITRATE| SIZE| QUALITY
MP3    128       1.8MB GOOD
MP3    64         820KB    POOR
MP3           32       430KB    CRAP

the dip in quality was unbearable, even the voice was getting affected in such a way that its tone and pitch changed to and extend that you immediately notice.

Then i notice the option .OGG in my encoder , so i selected it and redid the entire process and guess what i got results that were from other planets.

below is the conditions and properties of each file.

FORMAT| BITRATE| SIZE| QUALITY

OGG 128 1.2MB GREAT

OGG 64 534KB GREAT

OGG 32 230KB GOOD

the bit rate virtualy made no difference to the sound quality.

i had to listen to the 32 bit version and 128 bit version alternatively 3 time to feel the minute change that had occurd (i used audacity to analyze it). This siomply means there was no noticable change to quality that can be identified by human analysis easily.

i have no extra words but to request all of you to start using .OGG voribs format for your media ( both audio and video). because it's free and simply awsome in all sense.

I guarentee that you will never will be dissapointed by it.

and firefox 3 and up have inbuilt support for OGG media.

here is a good encoder to convert your media to .OGG = http://www.ogg-converter.com/

VLC Player is the best player that supports .OGG in my opinion

for further details or tech help

contact me from

www.blaisemcrowly.co.cc

C++ source code - Bank transaction simulation

noreply@blogger.com (Anonymous) — Mon, 14 Dec 2009 17:50:00 +0000

hai
this is a simple program that does the following things.

accept name and account number.
gives a menu selection to DEPPOSIT or WITHDRAW cash.
Controls withdrawal depending on cash balance.
Print a detailed sheet with details of all transactions

INCLUDE THE FOLLOWING LIBRARIES:
iostream.h
string.h

===========================code=================

struct trans{
    long int bal,amont;
    char act,dat[10];
}action[10];
struct cust{
    char nam[25];
    long int baln,accn;
}omer;

int i=0;

int main()
{
    omer.baln=0;
    char y;
    int x;
    void depo();
    void vido();
    cout<<"Enter NAME:";
    cin>>omer.nam;
    cout<<"Enter account number:";
    cin>>omer.accn;
    do{
        cout<<"[1] Depposit\n";
        if(omer.baln>0)
        {
            cout<<"[2] Withdraw\n";
        }else
        {
            cout<<"YOUR BALANCE IS 0 ,PLEASE DEPOSIT A SUM BEFORE OTHER TRANSACTIONS.\n";
        }
        cout<<"OPTION:";
        cin>>x;

        if(x==1)
        {
            depo();
        }
        if(x==2)
        {
            vido();
        }
        cout<<"\nDO YOU WANT TO CONTINUE[y/n]:";
                cin>>y;
    }while(y=='y'||y=='Y');

        void balance();
        balance();
}

void depo()
{
    cout<<"\n\nEnter Date (format- dd/mm/yyyy) :";
            cin>>action[i].dat;
    cout<<"Enter amount to deposit:";
    cin>>action[i].amont;
    omer.baln+=action[i].amont;

    action[i].act='D';
i++;
}

void vido()
{
    cout<<"\n\nEnter Date (format- dd/mm/yyyy) :";
            cin>>action[i].dat;
    cout<<"Enter amount to deposit:";
    cin>>action[i].amont;
    if(omer.baln>action[i].amont)
    {
        omer.baln-=action[i].amont;

    action[i].act='W';
i++;

    }else
    {
        cout<<"\n***YOU DONOT HAVE ENOUGH BALANCE***\a\a";
    }
}

void balance()
{
    cout<<"\n\n\n";
    cout<<"NAME:"<<<"\t\t\t\t\t"<<"ACC:"<
    cout<<"\n========================================================\n";
    cout<<"Si|\tAMOUNT|\tTRANSACTION|\tDATE|\tBALANCE|\n";
    for(int k=0;k
    {
        cout<<<"\t"<<<"\t"<<<"\t"<<<"\t"<
        cout<<"\n";
    }
    cout<<"========================================================\n";
    cout<<"BALANCE: "<
}

===========================END====================

c++ source code to seperate or divide a string into words

noreply@blogger.com (Anonymous) — Sat, 05 Dec 2009 11:48:00 +0000

This program will accept a string and divide it and store each word in a 2D array ,and then display it.

you will need the following header files
conio.h

string.g
iostream.h

============================================
int main()
{clrscr();
    char tall[80],wrd[10][15];
    cout<<"Please enter your string\n:";
    cin.getline(tall,80);
    int r=0,c=0;

    for(int i=0;i
    {   c=0;

        while(tall[i]!=' ')
        {
            wrd[r][c++]=tall[i];
            i++;
        }

        if(tall[i]==' ')
        {
            wrd[r][c]='\0';
            r++;
        }
    }
clrscr();
    for(int i=0;i
    {
        cout<<"\n"<
    }

   }
------------------------------------------------------------------------------------------------
if you need any hel , feel free to get me at
tech support at http://blaisemcrowly.co.cc

ClamAV - Free & open sourceantivirus also the best.

noreply@blogger.com (Anonymous) — Wed, 02 Dec 2009 12:31:00 +0000

ClamAV or WinClam

ClamAV or Clam Anti-Virus is an open source , free and community supported anti virus software.

It has many advantages and i personally recommend if for use in you P.Cs.

Now i will explain how you can use this amazing project from the international open source community.

DOWNLOAD:

Windows users: http://www.clamwin.com/

Other Users: http://www.clamav.net/download/

ubuntu users may activate the back port repository and install the latest version from the package manager.

USE:

Win clam has a GUI just like other antivirus systems.

The linux versions are are mainly command line based, but if you would like to have GUI, you may install CLamtk or KlamAV.

But i strongly recommend that you learn and use the command line , as it havs more advanced options.

Features:

command-line scanner
fast, multi-threaded daemon with support for on-access scanning
milter interface for sendmail
advanced database updater with support for scripted updates and digital signatures
virus scanner C library
on-access scanning (Linux® and FreeBSD®)
virus database updated multiple times per day (see home page for total number of signatures)
built-in support for various archive formats, including Zip, RAR, Tar, Gzip, Bzip2, OLE2, Cabinet, CHM, BinHex, SIS and others
built-in support for almost all mail file formats
built-in support for ELF executables and Portable Executable files compressed with UPX, FSG, Petite, NsPack, wwpack32, MEW, Upack and obfuscated with SUE, Y0da Cryptor and others
built-in support for popular document formats including MS Office and MacOffice files, HTML, RTF and PDF

for more details or help
feel free to contact me on
http://blaisemcrowly.co.cc
blaise.crowly@gmail.com

Jsymphonic - Sonic Stage for linux - or altranative for SonicStage.

noreply@blogger.com (Anonymous) — Fri, 30 Oct 2009 17:20:00 +0000

Jsymphonic

SonyWalkman , Sonic stage On linux

So i was talking about Opensource substitutes for Popular software in my last Post, and i thought about one of the tools that i specified it is

Jsymphonic - an opensource substitute for Sonicstage
and allows you to use your Sony WAlkman in Linux,

this single piece of software will answer all the questions like:

How to Run sonic stage on Linux?
How to transfer songs to sony walkman without sonic stage?
How to Use sony walkman on Linux?
How to Transfer music back from Sony Walkman?

so if you are one of them who has been wondering about these ,then this is the answer for all of those .

Sonic stage is a small and simple software writen in java, hence it will work on any OS that has java installed.
It is really small that you can copy the file into your Walkman and have a transfer tool that can transfer music from and to your walkman wherever you go.

STEP 1: Download this revolutionary tool (Jsymphonic)

CLick To Downlaod from official site.

STEP 2: Follow the step by step guide on how to install Java

if you do not have it already.

Step By step Guide

STEP 3: Running Jsymphonic

HOW TO

EXTRA: if you face any problems You may please check out

The FAQ section, it should solve almost anything

So thats for now enjoy your music ,if you face any tough situations need help with anything feel free to contact me.

blaise.crowly@gmail.com

http://blaisemcrowly.co.cc

Open Source substitutes for Popular Tools

noreply@blogger.com (Anonymous) — Tue, 27 Oct 2009 12:47:00 +0000

Hi
In the past few years , the world of open source have taken a giant leap from just being a theory into a world wide phenomenon , bringing with it some of the worlds best software and tool the cyber freaks can hope for.
And while we discuss over this topic we can never ignore the contributions of some giant companies that supported the open source community without limits , namely Google , SUN Microsystms and Canonical.

So today i will be presenting you with a list of open source substitutes for some of the popular software.
I have personally tried out each of these and believe me , you wont regret moving over to these.

===============================================

SOFTWARE=============================SUBSTITUTE

================================================

Windows-----------------------------------------> Linux (Trust me you wont look back)

Windows Media Player -----> VLC (how about never seeing "Canot Play" Message)

Microsoft Office -------------------------> Open Office (Your office will just get better)

Internet Explorer ----> Firefox or Google Chrome(Let me see if you will ever even think of IE)

Photoshop --------> GIMP ( it is great, but not 100% what PS is, but soon it will be, it's really promising, and guess what it can do lot of stuff PS cant)

Quake 3 ------> Assault Cube

And this is some thing that thousands of Users are looking for

a Open Source Substitute of Sonic Stage (Sonicstage) for linux.

Surprise .. It exist...

guess what it will work on Linux Windows and Mac , and it is portable

and hence you can carry this small file in your sony walkman itself.

it is writen in java to the best of what a program can get to.

Jsymphonics -- here it is

I will be writing a tutorial on the basics of it, soon most probably tomorow itself.

if you want any help feel free to conatct me at blaise.crowly@gmail.com

or use the contact page at http://blaisemcrowly.co.cc

using random() in c++ to asign values randomly

noreply@blogger.com (Anonymous) — Sat, 24 Oct 2009 09:07:00 +0000

hi all,
today the number of programs that make use of randomly generated numbers are huge, They range from ticket reservation program to Programs that generate random encrypted keys and passwords.
c++ has a have an inbuilt random number generating function called random found in
the stdlib.h header file.
Here we will be using it to write a program that assign duty to 7 doctors over 7 days a week such that non of them work on the same day and no doctor works 2 days a week. please replace the () in red with < and>
========================CODE======================

#include(iostream.h)

#include(stdlib.h)

#include(string.h)

struct doc{
    char dname[25];
    int did;
    int wnum;
};

int main()
{
    int dnum[7]={1,2,3,4,5,6,7};
    doc d[7];
    for(int i=0;i<7;i++)
    {
        cout<<"Enter the Details:\n";
        cin.getline(d[i].dname,25);

        cin>>d[i].did>>d[i].wnum;
    }
    long x,j=0;
    for(int i=0;i<7;i++)
    {
        j=0;
        while(j==0)
        {

                    x= random(7) + 1;

            if(dnum[x-1]==x)
            {
                j=1;
                cout<<<" "<<<" "<
                                switch (x)
                                {
                                    case '1': cout<<" \nMONDAY";
                                    break;
                                     case '2': cout<<" \nTUESDAY";
                                     break;
                                      case '3': cout<<" \nWEDNESDAY";
                                      break;
                                       case '4': cout<<" \nTHURSDAY";
                                       break;
                                        case '5': cout<<" \nFRIDAY";
                                        break;
                                         case '6': cout<<" \nSATURDAY";
                                         break;
                                          case '7': cout<<" \nSUNDAY";
                                          break;
                                }
                dnum[x-1]= -2;
            }
        }
    }

        return 0;
}
===================END=======================

If you wnat any help feel free to email me at blaise.crowly@gmail.com

Blaise M Crowly
http://blaisemcrowly.co.cc

How To - Pascals triangle using loop - c++ code

noreply@blogger.com (Anonymous) — Fri, 23 Oct 2009 12:25:00 +0000

hi
i had posted the code to generate Pascals triangle in c++ using arrays, but it can be done in a more easy way , using just 2 for loops.
And it is just 1/4 the amount of code.
Here is an easy logic in c++ to generate pascals triangle using for loops.
The part that has been marked in red is the code used to center align the triangle. I suggest that if you are getting confused you remove that part for better understanding of the Programs Logic.

please replace the () in red with < and>
====================================================

int main()
{
int n , d , l , k=0;
cin >> n;
d = n;
k=n;
l = 0;
for (int y = 0; y < n; y++)
{
while(l
{
cout<<" ";
d = d-1;
};
if(d
{
k = k-1;
};
d = k;

    int c = 1;
    for (int x = 0; x <= y; x++)
    {
      cout << c << " ";
      c = c * (y - x) / (x + 1);
    }
    cout<<"\n";
}
cout<<"\n";
return 0;
}
==================================================

thats it , for any further help you may mail me at blaise.crowly@gmail.com

Http://blaisemcrowly.co.cc
Blaise M Crowly

How to - Pascals triangle using arrays - c++ code

noreply@blogger.com (Anonymous) — Fri, 23 Oct 2009 12:14:00 +0000

Type: c++
hi all , here is the codes that print the pascals triangle using arrays to generate it,

WARNING: IF YOU USE BORELAND TURBO C++ it may not allow to declare arrays using variables as size parameters in that case.

remove all lines marked with red and replace them with the text between the \* & */ near then. and declare a value for C = number of lines to be printed.

===================================================
#include
int main()
{
int ac,tc,d=0,k, bc,t,i=0,h,f;
int c; \* int c= "your value" */
cout<<"Please enter the number of lines requeired";
cin>>c;
ac= (2*c)+1;
bc=2*c;
int a[ac]; \* int a[ value twise C + 1]; */
tc=0;
a[bc]=0;
f=ac;
while(c>=tc)
{
cout<<" ";
tc++;
}
//=========================fill array
while(d<=ac)
{
if(d==c)
{
a[d]=1;
d++;
}

else
{
a[d]=0;
d++;
}
}

//===============================
cout<<"1 \n";;

k=c-1;
int y=0;
//================set and print nums
while(k>0)
{
//align==========
h=c-y;
while(h>0)
{
cout<<" ";
h= h-1;
}
y++;

//--------------------
d=0;
while(d
{
t=d+1;
a[d]=a[d]+a[t];
d++;
}
//==========print
i=0;
while(i
{
if(a[i]>0)
{
cout<<<" ";
i++;
}
else
{
i++;
}
}
cout<<"\n";
k--;
}

}

=================END=========================

for any further help you may please contact me at blaise.crowly@gmail.com

http://blaisemcrowly.co.cc

Blaise M Crowly

How to - Fibonacci with recursive function - c++

noreply@blogger.com (Anonymous) — Thu, 22 Oct 2009 19:43:00 +0000

The following is the code to generate the fibonacci number at a user specified position using recursive function.

Code:
==================================================
#include
long fiboo(int y);
void main()
{
int x;
cout<
cin>>x;
cout<
}
long fiboo(int y)
{
    if (n <= 1) {
        return n;
    } else {
        return fiboo(n-1)+fiboo(n-2);
    }
}

==============================================
ok thats it
if you want any help feel free to contact me
at http//www.blaisemcrowly.co.cc   USE THE CONTACT ME PAGE
or mail me at blaise.crowly@gmail.com

Create a C program that will input letters a-z. but only the consonants will be printed?

noreply@blogger.com (Anonymous) — Thu, 22 Oct 2009 12:53:00 +0000

Aim: Create a C program that will input letters a-z. but only the consonants will be printed?
Type: Basic C++ , Array Manipulation.

Code:===============================================

#include

int main()
{

char al[26];
for(int i=0;i<26;i++)
{
cout<<"\nEnter alphabet... enter one and press enter : ";
cin>>al[i];
}

for(int i=0;i<26;i++)
{
if( (al[i]!='a')&&(al[i]!='e')&&(al[i]!='i')&&(al[i]!='o')&&(al[i]!='u'));
{
cout<<<" ";
}
}
return 0;
}
==================================================

I wrote it for someone who asked for it in yahoo answers.
for any help , just contact me.
http://www.blaisemcrowly.co.cc use the CONTACT ME page
or mail me at blaise.crowly@gmail.com