easy23d

Archmodels vol.52

2011-01-23T00:13:00.001-08:00

Archmodels Vol. 52 | 995 Mb
Format: .max + textures

INFO pdf:http://www.evermotion.org/comm/am52/archmodels_vol_52.pdf
This collection comes with 60 models of trees, leaves and bushes.

Download:
Hotfile.com
http://hotfile.com/dl/90064623/0406c02/arm....part1.rar.html
http://hotfile.com/dl/90064629/ca1044f/arm....part2.rar.html
http://hotfile.com/dl/90064624/03ecb9b/arm....part3.rar.html
http://hotfile.com/dl/90064628/0de08de/arm....part4.rar.html

Filesonic.com
http://www.filesonic.com/file/43812761/armodV52.part1.rar
http://www.filesonic.com/file/43815292/armodV52.part2.rar
http://www.filesonic.com/file/43810737/armodV52.part3.rar
http://www.filesonic.com/file/43814502/armodV52.part4.rar

Fileserve.com
http://www.fileserve.com/file/M8SvPaS/armodV52.part1.rar
http://www.fileserve.com/file/UkwW3uq/armodV52.part2.rar
http://www.fileserve.com/file/JFZHg2Q/armodV52.part3.rar
http://www.fileserve.com/file/vy452JC/armodV52.part4.rar

Cars 2004 - 2007

2011-01-23T00:12:00.003-08:00

DOSCH 3D: Cars 2004 - 2007 | 719 Mb

Formats: 3DS, OBJ, MAX, C4D, LWO, MB

Cars 2004Formats: MAX
INFO: http://www.doschdesign.com/products/3d/Cars_2004.html

Cars 2005
Formats: 3DS, MAX, C4D
INFO: http://www.doschdesign.com/products/3d/Cars_2005_V1-1.html

Cars 2006
Formats: 3DS, OBJ, MAX, C4D, LWO, MB
INFO: http://www.doschdesign.com/products/3d/Cars_2006.html

Cars 2007
Formats: 3DS, OBJ, MAX
INFO: http://www.doschdesign.com/products/3d/Cars_2007.html

This product is compatible with:
- 3ds max
- Poser
- Carrara 3 – 5
- Cinema4D
- Electric Image
- FormZ
- LightWave3D (V6-V9)
- Maya
- Realsoft 3D
- SOFTIMAGE|XSI
- SolidThinking
- Strata3D CX
- TrueSpace (Caligari)

Download:

Hotfile.com

http://hotfile.com/dl/56504767/4110e93/Cars.part01.rar.html

http://hotfile.com/dl/57830006/37bd9d3/Cars.part02.rar.html

http://hotfile.com/dl/57824431/8faf827/Cars.part03.rar.html

http://hotfile.com/dl/57836332/07c58df/Cars.part04.rar.html

http://hotfile.com/dl/57836029/29410cb/Cars.part05.rar.html

http://hotfile.com/dl/58331707/efe0491/Cars.part06.rar.html

http://hotfile.com/dl/57846183/ebb7306/Cars.part07.rar.html

http://hotfile.com/dl/57851388/6eae34a/Cars.part08.rar.html

Sharingmatrix.com

http://sharingmatrix.com/file/15199041/Cars.part01.rar

http://sharingmatrix.com/file/15013335/Cars.part02.rar

http://sharingmatrix.com/file/15013353/Cars.part03.rar

http://sharingmatrix.com/file/15199049/Cars.part04.rar

http://sharingmatrix.com/file/15199055/Cars.part05.rar

http://sharingmatrix.com/file/15199063/Cars.part06.rar

http://sharingmatrix.com/file/15199077/Cars.part07.rar

http://sharingmatrix.com/file/15139631/Cars.part08.rar

3ds Airplane Model

2011-01-23T00:12:00.001-08:00

3ds Airplane Model | .3ds | 60Mb

Hotfile
http://hotfile.com/dl/48978500/716ff79/3ds...adXing.rar.html

Fileserve
http://www.fileserve.com/file/bhCtsDu

Letitbit
http://letitbit.net/download/5210.c56adeba...adXing.rar.html

DOSCH HDRI: Chrome & Studio Effects

2011-01-23T00:11:00.000-08:00

DOSCH HDRI: Chrome & Studio Effects | 688Mb

Version 2 contains 50 additional HDRI studio light settings in very high resolution.

The 200 HDR-Images of various reflection-effects and studio settings are provided in the most widely used formats:

Light-Probe (Angular Map)
Spherical Map (Latitude-Longitude)
Vertical-Cross
Horizontal-Cross

Radiosity - and therefore the use of HDRIs is directly supported in most 3D-applications like 3dsmax 6, VizRender 2005, Viz 2005, Lightwave (version 6.0 and higher), Softimage|XSI, Maya & Mentalray, Bryce 6, Pixar RenderMan, Autodesk VIZ4, messiah:render (Arnold), InSight (Integra), 3ds-max & VRay, 3ds-max & Brazil r/s (Splutterfish), 3ds-max & finalRender (Cebas), Cinema4D Version 8.1, Vue5, Lightwork Render System and many more.

High-resolution HDRIs:
The 150 HDRIs of "version 1" of this collection are provided in the following resolutions - and are therefore also perfectly suited for background use.
Light-Probe - 2048x2048 Pixel
Light-Probe Small - 512x512 Pixel
Spherical Map - 2048x1024 Pixel
Vertical Cross - 1536x2048 Pixel
Horizontal Cross - 2048x1536 Pixel
Format: .hdr (RADIANCE Image Format) and .exr (Open EXR)

The 50 additional high resolution HDRIs are provided in the following formats/ resolutions:
Light-Probe - 2048x2048 Pixel
Spherical Map - 6000x3000 Pixel
Vertical Cross - 3000x4000 Pixel
Horizontal Cross - 4000x3000 Pixel

http://hotfile.com/dl/97369809/1f36ed1/DOSCHHDRI_ChromeStudioEffects.part1.rar.html
http://hotfile.com/dl/97369807/1e9583e/DOSCHHDRI_ChromeStudioEffects.part2.rar.html
http://hotfile.com/dl/97369812/49c9186/DOSCHHDRI_ChromeStudioEffects.part3.rar.html
http://hotfile.com/dl/97371085/08cc1c4/DOSCHHDRI_ChromeStudioEffects.part5.rar.html
http://hotfile.com/dl/97371222/6a065c4/DOSCHHDRI_ChromeStudioEffects.part6.rar.html
http://hotfile.com/dl/97371295/2cec338/DOSCHHDRI_ChromeStudioEffects.part7.rar.html

http://www.fileserve.com/file/FDBEQts
http://www.fileserve.com/file/MztfD7E
http://www.fileserve.com/file/e7CwehH
http://www.fileserve.com/file/4PhbHNn
http://www.fileserve.com/file/uAfZ4tK
http://www.fileserve.com/file/gtNNajK
http://www.fileserve.com/file/AZnRWmD

DOSCH 3D Animals

2011-01-23T00:09:00.001-08:00

DOSCH 3D: Animals | 468Mb

This product DOSCH 3D: Animals contains 48 very detailed and fully textured 3D-models of various animals. The product contains 12 dog breeds, 7 different large cats, 6 domestic cat breeds, 7 "exotic" animals, incl. bear, elephant, dromedary, zebra, crocodile, as well as various smaller animals like goat, hare, hedgehog, turtle, frog and more.

Use them for visualizations, animations or illustrations.

The completely textured 3D-models are provided in multiple file formats: 3DS, Lightwave (version 6 and above), OBJ, FBX and Cinema 4D (version 7 and above).

http://hotfile.com/dl/98163340/44e3152/Dosch3D_Animals.part1.rar.html
http://hotfile.com/dl/98163638/452107a/Dosch3D_Animals.part2.rar.html
http://hotfile.com/dl/98163722/fd648a5/Dosch3D_Animals.part3.rar.html
http://hotfile.com/dl/98163864/9fc3a2b/Dosch3D_Animals.part4.rar.html
http://hotfile.com/dl/98163903/332aeee/Dosch3D_Animals.part5.rar.html

http://www.fileserve.com/file/gEP6VJS
http://www.fileserve.com/file/xJnjV3F
http://www.fileserve.com/file/Hq9QtMw
http://www.fileserve.com/file/QkSawUT
http://www.fileserve.com/file/FqYTTCP

http://www.filesonic.com/file/61172051/Dosch3D_Animals.part1.rar
http://www.filesonic.com/file/61172127/Dosch3D_Animals.part2.rar
http://www.filesonic.com/file/61172407/Dosch3D_Animals.part3.rar
http://www.filesonic.com/file/61173905/Dosch3D_Animals.part4.rar
http://www.filesonic.com/file/61172573/Dosch3D_Animals.part5.rar

Autodesk Inventor Fusion 2011 Preview 4 v2 x86/x64 English

2011-01-21T12:29:00.002-08:00

Autodesk Inventor Fusion 2011 Preview 4 v2 x32/x64 English (2010) | 1.61 GB

A preliminary version of Autodesk Inventor Fusion technology is fully compatible with Autodesk Inventor 2011. This innovative work with digital prototypes includes intuitive features direct simulation, greatly increase the usability of the product. The technology allows you to quickly make changes to the projects of any size (up to the cardinal), as well as to combine the processes of direct and parametric modeling while working on a single digital model, Autodesk Inventor.

Year: 2010
Version: 0.4.0.56
Developer: Autodesk Inc
Platform: Microsoft Windows XP & Vista & 7
Compatible with Windows 7: complete
Language: English

System requirements:
* Microsoft Windows XP Professional (SP2, SP3)
* Microsoft Windows XP Professional x64 Edition (SP1, SP2)
* Microsoft Windows Vista (32-bit and 64-bit): Home Basic and Premium, Business, Ultimate, or Enterprise (SP1, SP2)
* Microsoft Windows 7 (32-bit and 64-bit): Home Premium, Professional, or Ultimate
* Intel Pentium 4, AMD Athlon 64, AMD Opteron, or later
* 512MB RAM minimum for Windows XP, 1 GB minimum RAM for Windows Vista and Windows 7. 2GB or more recommended
* 1024 x 768 minimum screen resolution. 1280 x 1024 or higher recommended
* DVD-ROM drive (not required if installing via download)
* 2.0 GB free hard disk space for installation. Additional 2.0 GB required when installing with downloaded self-extracting files
* Microsoft Direct3D 9 or Direct3D 10 capable graphics card; with Pixel Shader 3.0. 256MB or more recommended
* Microsoft Internet Explorer 6 (SP2) or higher
* Adobe Flash Player 9.0 or 10.0 for viewing help video
* Microsoft Office 2003 plug-in or 2007 for viewing Microsoft PowerPoint and Microsoft Word documents
* Adobe Reader 8.1 or higher for viewing Adobe PDF documents
* Autodesk Design Review 2009 or later for viewing DWF

Autodesk Inventor Fusion - a separate application that works regardless of whether you have installed Autodesk Inventor 2011 or not, just then a file created in Autodesk Inventor Fusion, you can import Autodesk Inventor 2011 and continue to use it.

There are two options:
* Edit the details created in Autodesk Inventor 2011. Open in Autodesk Inventor Fusion file created in Autodesk Inventor 2011, and change it there. Then these changes in Autodesk Inventor Fusion (in file Inventor 2011) can be applied with Change manager (will appear in Autodesk Inventor 2011 after installing Autodesk Inventor Fusion, by default there is a tick) to the details of Autodesk Inventor 2011, those operations that choose. I have those changes appear in the tree, the operation "sculptor." True, creates an additional file Autodesk Inventor Fusion, from which it is listening and change.
* Redaktrirovanie details created in Autodesk Inventor Fusion. Piece, created in Autodesk Inventor Fusion, imported into Autodesk Inventor 2011, and there it shows how a basic body, which can continue to work on, ie make further means of constructing Inventor. To change the size of the base body can be used as tools from Autodesk Inventor 2011, and take advantage of the proposal to run Autodesk Inventor Fusion and make changes to the details in it.

Additional Information:
* When installing do not require a connection to the Internet;
* The distribution has been tested and fully functional.

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

RealTime Landscaping Architect 2.06 x86 English [Creating The Landscape

2011-01-21T12:29:00.000-08:00

RealTime Landscaping Architect 2.06 x86 English [Creating The Landscape]-REDT | 1.78 GB

RealTime Landscaping Architect - software for creating professional landscape in 2D and 3D. Provides an opportunity to create dendraplana, reliefs, three-dimensional images of objects, as well as the effect of real travel in the territory. You will create dendroplan, form part of bird's-eye view, 3D-image area with the possibility of movement on the Territories, the creation of video.

Program for the creation of the landscape version 2.06 contains at least 200 new accessories, 12.800 objects, 5700 exclusive of planning and 1200 attributes of design. Program site has an impressive gallery of finished projects and screenshots of the program, and view short video design works created by RealTime Architect.
Landscape designer, no doubt, must have not only good taste, but also knowledge of architectural styles - both historical and contemporary trends, laws of composition, color science, of color, shaping, Biology, Dendrology, landscape graphics and computer simulation.

Ext. Info: After installation, you refuse to run the program ... go to the C drive in folder RealTime Landscaping Architect and copy the files from redt - is the same place where Setup, it asks to replace ... replace ... and may need to reboot the comp ... maybe you should go to the C drive as an administrator ...

System requirements:
1 GHz CPU (1.8 GHz and more)
Windows XP / Vista/Windows7
512 MB RAM
Graphics card with 128 MB of memory
Keyboard, Mouse
Recommended video:
NVidia GeForce FX 5200 and above
ATI Radeon 9250 or higher

Year/Date: 2010
Version: 2.06
Purpose: The creation of the landscape
Developer: Idea Spectrum
Language: English
Medicine: Yes

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

Flow Architect Studio 3D 1.3.7

2011-01-21T12:28:00.002-08:00

Flow Architect Studio 3D 1.3.7 | 37.43 MB

PIXELPLAN Flow Architect Studio 3D is a software package that enables a simple and easy way to create interactive 3D visualization - virtual walks. Created visualizations are like a computer program, located in one file and are suitable for further distribution and publication on the website.

In PIXELPLAN Flow Architect Studio 3D
* You can quickly and easily create a visualization of any object
* You have to keep the facilities built preview (WYSIWYG)
* Have the ability to build any walls and the creation of custom objects
* And any of their deployment
* In a natural way you arrange the lighting
* And create animations of selected geometric objects
* You can use libraries of models, materials and textures
* In a simple way with your project, you can generate the final visualization
* You can import new models for libraries
* And build from scratch your own library

Visualization created using PIXELPLAN Flow Architect Studio 3D
* Is a computer program allows you to freely walk
* Uses the latest 3D technology
* Has dynamic lighting
* And dynamic shadows

Home Page - http://www.pixelplan.pl/index.php?pid=oferta

Download links:

Letitbit
or
Vip-file
or
HotFile

The Foundry Mari 1.1.2 x64 +Tutorials, Textures, Animated Sequences (2010)

2011-01-21T12:28:00.000-08:00

The Foundry Mari 1.1.2 x64 +Tutorials, Textures, Animated Sequences (2010) | 4.3 Gb

Mari was developed by a New Zealand company Weta Digital, which was used in such films as the District 9, The Lovely Bones and Avatar. Mari is intended only for texturing 3D-models. From analogues (Zbrush, Mudbox, Blender, 3d-coat) is different for up to several thousands of large textures (32k to 32k pixels) on the model, greater speed of working with large textures, greater opportunities for visualization, flexible engine, brushes, animation support, and the ability to create animated textures.

Year: 2010
Version: 1.1.2
Developer: The Foundry
Bit depth: x64
Compatibility with Vista: Unknown
Compatible with Windows 7: It works on x64
Language: English
Medicine: Integrated

System requirements:
* Windows July 1964-bit, or a Linux 64-bit operating system (Fedora 12 or Red Hat Enterprise Linux 5.4)
* 250GB disk space available for caching and temporary files (or a minimum of 50GB if you're working on a small project)
* At least 4GB RAM
* Display with 1680 x 1050 pixel resolution
* An NVIDIA graphics card with at least 1GB of RAM and OpenGL 3.0 support (see Recommended Graphics Cards below).

Recommended Graphics Cards:
* NVIDIA GeForce GTX 480
* NVIDIA Quadro FX 3800
* NVIDIA Quadro FX 3800M
* NVIDIA Quadro FX 4800
* NVIDIA Quadro FX 5800
* NVIDIA Quadro (Fermi Series) 5000
* NVIDIA Quadro (Fermi Series) 6000

Painting:
* Fully customisable brush engine
* 'Paint through' and 'clone from' between layers and textures (including 'clone from' on-surface)
* 'Slurp' brush for smearing and dragging texture
* Paint canvas transform, grid warp and free-form 'pin' warp
* Blur and sharpen, including on-surface, multiple UV patches simultaneously
* Advanced 'healing' brush for seam removal and duplication of texture detail

Environment:
* Filters with real-time preview
* Advanced channel masking engine, including mask painting, surface falloff, masking one channel to another, and by depth
* Supports customisable real-time 3D shader preview (eg specular highlights, displacement preview via bump mapping, ambient occlusion, layer blending modes, colour correction and more
* Customisable tool 'shelves' for brushes, colours, reference images, sharable between artist and projects
* Floating point, 16 bit or 8 bit channels
* All painting and shading tools are available in 3D projection paint mode and 'flat' UV paint mode
* Background plates for reference
* Imports multiple camera moves through which the model can be viewed

Models:
* Obj model format support
* Multiple objects, versions (eg high res or in key character poses), instances, with or without baked animation
* Interactively handles very large 3D model data sets, scaling to over 1 million polygons for a single topology or mesh
* Supports large textures up to 32K x 32K pixels
* Handles thousands of textures per model, over many channels
* Seamlessly supports hundreds of UV texture patches
* Handles animated geometry and animated textures
* Isolate, select, mask and hide geometry per patch and face
* Customisable lighting and rendering modes
* Massive geometry and texture data sets not limited by the amount of RAM

Workflow:
* Linux
* High quality turntable rendering
* Flatten and round-trip projected textures for modifying externally (for example in NUKE or Adobe © Photoshop ©)
* Open and extensible approach to UI, geometry, camera, shading, and supporting light and texture exchange
* Import and export as background tasks, allowing the artist to continue painting
* Embedded web browser for quick access to community forum
* Fully featured and open playtime colour management system
* Filters with real time preview and fully featured colour correction

Contents:
* Mari 1.1.2-win-x86-release-64.exe
* Product Tours - video tours of MARI's features (Video: MPEG4 Video (H264) 768x480, Audio: AAC 44100Hz mono)
* Getting-Started Guide Assets. Mari_GettingStarted_Tutorial.zip - Includes blacksmith body and tattoo.png
* Blacksmith Assets (Textures)
* Animated Sequences.

TurboCAD Professional 17.1 (2010)

2011-01-21T12:27:00.002-08:00

TurboCAD Professional 17.1 (Updated 11/2010) | 270MB

TurboCAD Pro maximum solution for the professional CAD design experienced designers. Built on the combined 2D drafting and 3D design surfaces, as well as recruiting tools TurboCAD Pro, this version includes a large number of additional technologies - ACIS solid modeling technology, D-Cubed technology and Lightworks Technology realistic rendering.

Key features:
"Combined 2D and 3D design
"Realistic rednering
"Compatibility with Microsoft Office
"Built-in Microsoft's VBA
"Additional tools drawing
"Selection Tools and editing
"Tools for annotation
"The new manager XREF
"Rendering styles and editor styles
"Setting up the working environment interface
"Style Manager for Architectural Design
"Additional tools for mechanical design
"Import and export files in the formats DWG / DXF, Google SketchUp and OBJ/3DS

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/gtvcaVg/IMSI.TCP.v17.part1.rar
http://www.fileserve.com/file/EH3yEPx/IMSI.TCP.v17.part2.rar
http://www.fileserve.com/file/NPvy38c/IMSI.TCP.v17.part3.rar

From Hotfile.com:

http://hotfile.com/dl/83428423/fdcd291/IMSI.TCP.v17.part1.rar.html
http://hotfile.com/dl/83428487/f82c144/IMSI.TCP.v17.part2.rar.html
http://hotfile.com/dl/83428499/bab4f8a/IMSI.TCP.v17.part3.rar.html

From Filesonic.com:

http://www.filesonic.com/file/33303909/IMSI.TCP.v17.part1.rar
http://www.filesonic.com/file/33304085/IMSI.TCP.v17.part2.rar
http://www.filesonic.com/file/33303953/IMSI.TCP.v17.part3.rar

Thanks for downloading. Enjoy!

Ultimate Plug Pack for After Effects (from Lemuriec) 1.0

2011-01-21T12:27:00.000-08:00

Ultimate Plug Pack for After Effects (from Lemuriec) 1.0 (Russian, English) | 878.37 MB

Introducing a super build-pack plug-ins for Adobe software companies - Ultimate Plug Pack for After Effects. Anyone who has worked with a program that will not need special representation in each functional plug-in than nete data set. A distinctive feature of plugins - that such a collection in one place and that everything is available medicine.

Release Date: 2010
Name of Program: Ultimate Plug Pack for Aftr Effects (from Lemuriec)
Software version: 1.0
Latest version: 1.0
Language: English, Russian
Treatment: Complete
Type of medicine: Other

System requirements:

* Processor Intel ® Pentium ® 4, Intel Centrino ®, Intel Xeon ® or Intel Core ™ Duo (or similar)
* OS Microsoft Windows XP with Service Pack 2 or Windows Vista ™ Home Premium, Business, Ultimate, or Enterprise (32-bit versions)
* 512 MB of RAM
* 64 MB VRAM
* 1 GB of free hard disk space (additional free space required during installation)
* Monitor with 1024x768 resolution and color depth 16-bit
* DVD-ROM drive
* QuickTime 7 software for multimedia features
Size: 931 Mb

Ingredients:
Digital.Anarchy toolbox
SteadyMove.Pro.v1.2.1.6220
RPF Motion Blur v1.0
ABSoft Neat Video v1.5
ALGOLITH_V1.0
AlphaPlugins FirTree v1.02
Anarchy Toolbox
Aurora Water AE
Boris Continuum Complete v5.0
Buena Software Au Naturel v1.1.2
Colorista
Cycore Effects v1.0.1 (ae7)
CycoreFX HD v1.5 [16]
DigiEffects Tools
Digital Film Tools ZMatte v2.0
Digital Trove Prime v4.0
DigitalFilmLAB
Dv Matte Pro
Echofire
Electrocolor Autocut
Electrocolor Fluid
Fandev BikiniDots v2.0.2
Fandev Grader v1.5.5
Fandev Supressor v1.7.2
Final.Effects.Complete
Frischluft flair_ae_v1.12
Frischluft Lenscare v1.4
Furnace 1.0v1
GenArts.Sapphire.v1.10
Foundry.Keylight.v1.1
Foundry.Keylight.1.0v3.Pro
GridIron Nucleo
Magic Bullet Suite v2.1
NeatVideo v1.5.1
Panopticum Toolbox
Pixel Farm Reflecmedia Mattenee v1.01
Pixelan SpiceMaster v2.5.0 Pro
Primatte Toolbox
Profound Effects Useful Assistants v1.7
Red Giant ToolBox
Reflecmedia.Mattenee.v1.01
REVisionFX.FieldsKit.v1.5.4
Stonetics Key Correct Pro v1.0
Synthetic Aperture Color Finesse v2.1.5
The Foundry Tinderbox 4 2.0v1
The Plausible Impossible Reality v1.0
Tiffen Dfx Digital Filter Suite v1.0.0
Title Toolkit
Topaz Enhance v2.2
Trapcode Toolbox
TVzeka AE
Walker Effects v2.1
Zaxwerks

Treatment procedure:
Each complete

Information for all.
There are no viruses like. Sometimes Kaspersky ****** sees as a virus. So accurate ... Do not erase ****** antivirus. When you install a better turn it off.

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/uBjpjP7/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part1.rar
http://www.fileserve.com/file/nzCm9D7/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part2.rar
http://www.fileserve.com/file/mhTpF9M/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part3.rar
http://www.fileserve.com/file/EaX5GXr/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part4.rar

From Hotfile.com:

http://hotfile.com/dl/83417410/bc18e41/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part1.rar.html
http://hotfile.com/dl/83417409/b3f2fe4/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part2.rar.html
http://hotfile.com/dl/83417760/7a60999/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part3.rar.html
http://hotfile.com/dl/83417764/56c7eba/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part4.rar.html

From Filesonic.com:

http://www.filesonic.com/file/33288645/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part1.rar
http://www.filesonic.com/file/33288685/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part2.rar
http://www.filesonic.com/file/33289355/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part3.rar
http://www.filesonic.com/file/33288711/Adobe.After.Effects.Plugins.Mega.Pack.2008.PC.part4.rar

Thanks for downloading. Enjoy!

IMOLD v10 SP2.0 for SolidWorks 2007-2010

2011-01-21T12:24:00.001-08:00

IMOLD v10 SP2.0 for SolidWorks 2007-2010 (x86/x64) | 488.6 MB

IMOLD - CAMD software module for automatic construction of forming surfaces of the punch and matrix for the design of molds in SolidWorks, from the pioneer in the field of the same software company Manusoft Technologies Pte. Ltd.

To date, the designers of molds, using products SolidWorks Corp., Have a fairly wide range of partners, the company developed specialized applications that can help in this work. Deserve mention block libraries and other components of the molds, and packages MoldWorks SplitWorks. But beyond all the advanced Singaporean Manusoft TechnologiesPte Ltd. It offers one of the most complete package for designing molds, which will certainly be useful to users of SolidWorks. This package, called IMOLD, consists of a series of interconnected modules that help the designer step by step to design the mold at all stages.

Singapore's Manusoft Technologies Pte. develops and powerful, but at the same time easy to use 3D application for automated Mold Design (CAMD). Its main strategy is focused on introducing advanced technologies to address Design industry of precision instruments and their development. The company constantly strives to maintain a competitive advantage through the use and application of new technologies in the software.

This is Premium version. It has all IMOLD, EDM and MBC
I have tested it. with your crack.

Information:
To date, the designers of molds, using products SolidWorks Corp., Have a fairly large selection of partners, the company developed specialized applications, which can help in this work. Deserve mention block libraries and other components of the mold, and assembly MoldWorks SplitWorks. But many more advanced Singaporean Manusoft Technologies

Pte Ltd. It offers one of the most complete package for designing molds, which will certainly be useful to users of SolidWorks. This package, called IMOLD, consists of a series of interconnected modules, which help the designer step by step to design the mold for many etapah.Singapurskaya company Manusoft Technologies Pte. develops and powerful, but at the same time simple in yuzanii 3D applications for automated Mold Design (CAMD). Its main strategy is focused on introducing new technologies to address Design industry of precision instruments and their development. The company constantly strives to maintain competitive advantages through the use and application of advanced technologies in software bespechenii.

Major power Manusoft unveils IMOLD for SolidWorks:

- Data Preparation
Used to prepare the model for the design of the mold. One of the most useful aspects of this function - the possibility of the creation of derivative components without changing the original model. This tool is also used for the correct orientation of components during casting.
- Project Control
Loads a new product model in SolidWorks. Developers call this function gateway to all other modules IMOLD - at this stage we introduce all the basic infa about the project. Project Control module automatically creates a structure assembly of the mold: the file of the main assembly (the assembly of the upper level) and the files of the original model, the matrix, punch and slide. In general, there is an impression that the developers IMOLD built into the system a mini-PDM, which unobtrusively and organically accompanies the designer throughout the work, organizing a clear and orderly file structure of the project, which has a positive effect on its other kachestve.Pomimo Project Control module gives the ability to designer select the units and the type of material (for example, we take take plastic), subsequently causing the system automatically suggests shrinkage factor, which if necessary can be replaced by any dimensionless software by the user.
- Prefix name
Assigned a status name, which then will serve as the first part of the names of many parts, auto-generated IMOLD.
- Core / Cavity Builder
The module construction of the matrix and punch - one of the most powerful tools in the arsenal IMOLD. His menu includes a number of items. Draft Analysis feature gives the ability to test the model for the presence of zero and negative slopes. This is certainly very useful thing, especially for testing models derived from other customers.
- Parting lines and Parting surfaces
Intended for creation of curves and surfaces connector matrix, punch, sliders and other items. capabilities of these functions are too broad. In addition to full automatic separation surfaces of the model on the matrix and punch a large number of purely manual and interactive ways to do the same. This combination of features provides flexibility.
Automatic separation of forming the matrix and punch - a convenient and easy to yuzanii function.
- Patch Holes
Under Utilities has an interesting feature Patch Holes, which gives the ability to easily (virtually "on the fly") to patch any holes in the forming surfaces.
- Insert Creator
Menu item under the title, step by step guides the user through the process of creation of the inserts of the matrix and punch. The system divides them into "core" (one for the matrix and punch) and "helper." Main inserts are generated automatically, while complementing the designer must be defined. complementing insert automatically added to the assembly file socket that you created earlier. users can also juzat this tool to determine the size of the matrix and the punch holder, and specify the dimensions of blanks for key insertion.
- Layout Designer
c using this module greatly facilitates the planning of multi-molds. Established in the previous stages the matrix can be repeated several times and is located in the desired constructor order. This should clarify the location of the matrix - horizontally, vertically or software range - and enter number of places. In case of change of location or quantity of the system gives the ability to immediately see it on the screen. So provided "feedback" and the designer can immediately evaluate how it will look fresh version. in addition, there are editing tools. For example, possible to change the distance between nests or move a single slot (very strong feature).
- Feed Designer
An important component of any molds - injection system. At this stage of design in business comes included with the module IMOLD Feed Designer. The user is offered four menu item: Two for the design and modification of runners, two - for the injection channels. In the design process are given by the size and location of the runners and channels (the location of both the ability to change the software along the way that gives the ability to solve this problem the most optimal way). The form of injection channels can vary from straight lines to splines, and if necessary change it easily. Sprues and channels are allowed to move, copy and delete. may also change their defining parameters.
- Mold-Base Designer
Allows the user to specify the appropriate unit of a dozen libraries, building blocks of molds from various manufacturers, such as DME, Hasco, PCS, Progressive, Futaba, Misumi, etc. The selected block is automatically displayed on the screen, which is convenient. If necessary, all options at this stage can be edited. Parameters of many members of the unit elements can change easily - so the user can create their own library-based building blocks. The system does not change only certain fields, such as name of manufacturer original block.
- Ejector Pin
Module design ejector causes ebuild nest molds and provides an opportunity to specify suitable ejectors from the set of libraries from different vendors. When selecting a particular ejector some of its parameters are fixed, while others can be changed. Apart from the usual, cylindrical, and supported pushers "with key", which prevents pushers with the spatial profile of the buoyancy of the crank.
- Slide Designer
The next step is designing the mold - the construction of sliders, which is designed to help module Slide Designer. His menu includes a total of five points. Here we set all the parameters of the slide, including the manufacturer and type of slide. When the selected or user-defined slider is mirrored software to the standard configuration, it is possible to step back and add the necessary elements - for example, guides.
- Cooling Designer
in addition, IMOLD provides intuitive tools for the design of cooling channels complex spatial configurations. In this case, the constructor has the opportunity to consider also the technological aspects - such as how to drill holes for the cooling system.

Several items allow you to stop your choice on Manusoft unveils IMOLD for SolidWorks:

- A wide set of tools for the development of molds;
- High speed;
- Good integration with SolidWorks;
- Preview the results of most functions;
- A good hint system;
- Stability in the

Year: 2010
Version: V10 SP2.0 32bit & 64bit
Developer: Manusoft Technologies Pte. Ltd
Platform: Windows (32 & 64bit)
Compatibility with Vista: complete
Compatible with Windows 7: complete
Medician:Yes (Team-SolidSQUAD)

System requirements:
SolidWorks Version 2007 - 2010 Win32 & Win64 Editions
Graphics 1024x768 resolution with minimum 32768 colours
Disk Space 5GB free
Memory 1GB RAM (2GB recommended)
Language: multilanguage (English, Chinese, German, Polish, French, Japanese)

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/eKgmzaN/Imold.10.SP2.part1.rar
http://www.fileserve.com/file/5n6kmM9/Imold.10.SP2.part2.rar
http://www.fileserve.com/file/MMmMtHS/Imold.10.SP2.part3.rar
http://www.fileserve.com/file/qguYavG/Imold.10.SP2.part4.rar
http://www.fileserve.com/file/tBr7BgS/Imold.10.SP2.part5.rar

From Hotfile.com:

http://hotfile.com/dl/83945866/d03ecb9/Imold.10.SP2.part1.rar.html
http://hotfile.com/dl/83945867/a7f2552/Imold.10.SP2.part2.rar.html
http://hotfile.com/dl/83945873/d1b9eae/Imold.10.SP2.part3.rar.html
http://hotfile.com/dl/83946037/5520b67/Imold.10.SP2.part4.rar.html
http://hotfile.com/dl/83946102/a86c41f/Imold.10.SP2.part5.rar.html

From Filesonic.com:

http://www.filesonic.com/file/33946911/Imold.10.SP2.part1.rar
http://www.filesonic.com/file/33946959/Imold.10.SP2.part2.rar
http://www.filesonic.com/file/33946965/Imold.10.SP2.part3.rar
http://www.filesonic.com/file/33946969/Imold.10.SP2.part4.rar
http://www.filesonic.com/file/33946971/Imold.10.SP2.part5.rar

Thanks for downloading. Enjoy!

Collection Plugins for Adobe After Effects CS4-CS5 (x86/x64)

2011-01-21T12:23:00.001-08:00

Collection Plugins for Adobe After Effects CS4-CS5 (x32/x64) (22.11.2010) | 1.68 GB

One of the first plug-in packages released for Adobe After Effects, the heart of Final Effects Complete is its ability to generate ..

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

[/code]

Thanks for downloading. Enjoy!

RESCUE 911 CD [Release 2011]

2011-01-21T12:22:00.002-08:00

RESCUE 911 CD [Release 2011] | 605 MB

You may face some deactivation with your computer such as system failure, lost important data or viruses attacks, So you must be ready to fix it , With a set of smart tools in RESCUE 911 CD you will be ready in any emergency state and you will be able to diagnosis and Fix any deactivate.

Features
* Compatible with any computer Desktop or Laptop
* Kaspersky AntiVirus 2010
* DrWeb 2010
* Malwarebytes Anti-Malware
* SUPER AntiSpyWare
* WinPE
* SATA Dirvers
* Recover deleted and lost data
* Recover the passwords
* Restore and management backups
* Possibility of Internet connection
and more ..

How to Use:
1. Unrar
2. Burn ISO file in CD blank
3. Boot your computer from CD

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/smSkYKV/R911CD.part1.rar
http://www.fileserve.com/file/UJNYvYy/R911CD.part2.rar
http://www.fileserve.com/file/wxftFgm/R911CD.part3.rar
http://www.fileserve.com/file/QmGxxgE/R911CD.part4.rar
http://www.fileserve.com/file/8DnEtEU/R911CD.part5.rar
http://www.fileserve.com/file/UWeP5pH/R911CD.part6.rar

From Hotfile.com:

http://hotfile.com/dl/84385195/7ed3bd1/R911CD.part1.rar.html
http://hotfile.com/dl/84385409/0c8b139/R911CD.part2.rar.html
http://hotfile.com/dl/84385432/9855a27/R911CD.part3.rar.html
http://hotfile.com/dl/84385452/a0c59f5/R911CD.part4.rar.html
http://hotfile.com/dl/84385491/74d473e/R911CD.part5.rar.html
http://hotfile.com/dl/84385494/a168c91/R911CD.part6.rar.html

From Filesonic.com:

[/code]

Thanks for downloading. Enjoy!

Punch! Home Design Architectural Series 4000

2011-01-21T12:22:00.000-08:00

Punch! Home Design Architectural Series 4000 (2010) | 1.98 GB

Punch! Home Design Architectural Series 4000 brings you all the features of our industry-acclaimed Punch! Architectural Series 3000 -- plus we’ve fully integrated our most popular landscape software title, Master Landscape Pro.

The result: The most powerful and comprehensive Punch! Architectural suite of products ever assembled into one package.

400 Powerful Applications & 32 Powerful Programs all in one easy-to-use interface.

Regardless of your level of expertise, Punch! Home Design Architectural Series 4000 produces professional results.

New Punch! Updater.
Millions of Design Combinations.
Integrated Pool Designer!

Punch! Architectural Series 4000 is a quantum-leap in performance and realism over any other competitive product. Its 3D redraw speeds are up to FOUR times faster than the competition -- allowing Hollywood-style walk or fly-through in real time! New design wizards and a deep reservoir of design elements let you drag & drop over 30,000 design combinations with just a click! You’ll be amazed at the power, versatility, realism you’ll have at your fingertips!

PowerTools In Architectural Series® 4000 v10

3D Custom Workshop™
Animator™
Cabinet Wizard™
Deck Designer™
Door Designer™
DXF/DWG Export™
DXF/DWG Import™
Elevation Editor™
Estimator™
Fence Designer™
Fireplace Wizard™
Framing Editor™
GSP Sun Angle™
Layout Manager™
Material Workshop™
PhotoView™
PhotoView Editor™
Plant Editor™
Pool Designer™
Punch! Updater™
RealModel® (patented) ™
Roofing Wizard™
Room Wizard™
Section Detailer™
Site Planner™
Symbol Editor™
Topography Designer™
Trim Wizard™
Window Designer™

Other features of Architectural Series® 4000 v10

2D/3D Exterior Home Design
2D/3D Interior Home Design
2D/3D Landscape Design
Punch! Master Landscape Pro integrated
Punch! Interior Design Suite integrated
Skylight & Dormer Cutout Tools
Deck Cutout Tool
Brand Name Content
Decorator Palette
Punch! Updater
Accessories
Handicapped access & Solar Symbols
Compass
Precision Sizing
Precision Lighting Planner & effects
Expanded plant library
3DS Import
Foundation Planner
Electrical
Plumbing
HVAC
Ultimate Deck
Wainscoting
Object Organizers
3D Cutaway Tool
ClearView
Sprinkler System Design
Plant Finder
Detail Creator
Standard or Custom Roofs
Custom Door and Window Styles
Floor Plan Trace
Expanded measurements—supports fractions
Log home objects
Video (tool tip) tutorials
2D Elevations
Getting started tutorials
Convert-2-3D
Enhanced file import/export support
FREE Punch! Developer Kit

System Requirements for Architectural Series® 4000 v10

• Intel®, Pentium®, Celeron®, Xeon® and Centrino or AMD® Athlon® , Duron and Opteron Processor
• Windows®98 or higher
• 64 MB of RAM
• 3.8 GB of hard disk space
• VGA video card set at 800 x 600 resolution with 16 bit color depth (24-bit, if available)
• CD-ROM Drive
• Mouse or other pointing device
• 32 MB minimum video card memory
• (optional) Microsoft Internet Explorer 4.0 or above to use Punch! Updater
• (optional) Speakers and sound card to hear audio of Tutorial Videos

Rar file contains, AS4000Setup_Download.EXE, Content_Pack1.EXE, Content_Pack1.W02. Unrar to folder and run the AS4000Setup_Download.EXE. It will then take you through the install process.

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

[/code]

Thanks for downloading. Enjoy!

OnOne PlugIn Suite v5.1.2 incl.keygen-REDT

2011-01-21T12:21:00.002-08:00

OnOne PlugIn Suite v5.1.2 | 1.54 Gb

OnOne PlugIn Suite v5.1.2 includes 7 award-winning Photoshop plugins to help solve 7 of the most common problems photographers face. You get the most recent versions of Perfect Resize (powered by Genuine Fractals) for resizing, Mask Pro for removing unwanted backgrounds, PhotoTune for color correction, FocalPoint for selective focus and PhotoTools and PhotoFrame for amazing photographic effects. Plus, you get our newest product—Perfect Layers.

Perfect Resize 7
Perfect Resize 7—powered by Genuine Fractals—is the industry standard for image resizing. It is renowned across the photographic and printing industries for its ability to increase image size well over 1000% without the loss of sharpness or detail that you would normally expect. The patented, fractal based interpolation algorithms works like nothing else and the results speak for themselves.
Perfect Resize works as a plug-in to Photoshop, Lightroom, Aperture and as a stand-alone application.

PhotoTools 2.6
PhotoTools 2.6 is the fastest and easiest way to add a professional look to your photos in Photoshop. You get hundreds of professional-grade photographic effects, all wrapped up in an easy-to-use Photoshop plug-in making this the fastest and easiest way to make your photos stand out from the crowd.
PhotoTools works only as a Photoshop plug-in.

Perfect Layers 1
Perfect Layers is the fast and easy way to bring a layered workflow to Photoshop Lightroom. With Perfect Layers you can create and edit multi-layered Photoshop files directly within Photoshop Lightroom or Apple Aperture. Use it to change skies, composite images and even create layouts.
Perfect Layers works as a plug-in to Lightroom, Aperture or as a stand-alone application.

PhotoFrame 4.6
Add the perfect finishing touch to your images with PhotoFrame 4.6. It features hundreds of design elements like film edges, borders, textures, backgrounds and adornments. It even has complete layouts where you just drop your image in and you are done. It's the perfect way to add a realistic darkroom touch with a film edge or to create beautiful album or scrapbook pages. It includes all the tools you need to find the perfect design elements, add them to your image and control things like size, color and opacity. You can even stack multiple elements to create your own designs and save them as a preset you can use in a single-click inside of Photoshop, Lightroom or Aperture.
PhotoFrame works as a plug-in to Photoshop, Lightroom, Aperture and as a stand-alone application.

FocalPoint 2
You control the focus with FocalPoint 2. Create realistic selective focus, depth-of-field and vignette effects that tell your viewers right where to look. With the intuitive FocusBug controller it is just like using a tilt-shift or selective focus lens right inside of Adobe Photoshop. Set your area of focus and then select a lens to simulate or create your own by controlling the amount and kind of blur, even in 3D. With the new FocusBrush tool you can paint sharpness or blur right where you want it. Finish things off with an elegant vignette. It has never been easier or faster to focus your viewer's eye and minimize distractions.
FocalPoint works as a plug-in to Photoshop, Lightroom, Aperture and as a stand-alone application.

Mask Pro 4
Removing backgrounds or making complex selections has never been easier. With Mask Pro 4 you can select the tough stuff that you never thought was possible like hair, smoke and glass and maintain all the detail and transparency. Mask Pro works based on color; You select colors to keep and colors to drop and then just paint away backgrounds to keep only what you are interested in.
Mask Pro works only as a Photoshop plug-in.

PhotoTune 3
PhotoTune 3 optimizes the dynamic range, color and sharpness of your image without the need to know all the complicated controls in Photoshop like levels and curves. If you photograph people you can also tune your images by clicking on skin tones to guarantee accurate skin color. Pro users get access to all the controls for tone, color and sharpening. Better images are just a few clicks away with PhotoTune 3.
PhotoTune works as a plug-in to Photoshop, Lightroom, Aperture and as a stand-alone application.

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/p9ZsCRK/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part1.rar
http://www.fileserve.com/file/wQsT7H7/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part2.rar
http://www.fileserve.com/file/D7dxHmw/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part3.rar
http://www.fileserve.com/file/B7cu3cY/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part4.rar
http://www.fileserve.com/file/fagnW3s/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part5.rar
http://www.fileserve.com/file/NW3ZATq/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part6.rar
http://www.fileserve.com/file/7kj4fmb/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part7.rar

From Hotfile.com:

http://hotfile.com/dl/84384276/b73a5b5/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part1.rar.html
http://hotfile.com/dl/84384418/2941caf/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part2.rar.html
http://hotfile.com/dl/84384454/7f0e6e0/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part3.rar.html
http://hotfile.com/dl/84384457/a511111/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part4.rar.html
http://hotfile.com/dl/84384461/889cd25/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part5.rar.html
http://hotfile.com/dl/84384473/124ff6b/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part6.rar.html
http://hotfile.com/dl/84384499/8f01960/OnOne.PlugIn.Suite.v5.1.2.incl.keygen-REDT.part7.rar.html

From Filesonic.com:

[/code]

Thanks for downloading. Enjoy!

Trinigy Vision SDK v.8.0.16

2011-01-21T12:21:00.000-08:00

Trinigy Vision SDK v.8.0.16 (2010) | 2.81 GB

Trinigy Vision SDK - A new set offers a long list of new features, including improved lighting system, allowing you to create a physically accurate lighting as stationary objects and moving images, taking into account the effect of radiosity (indirect lighting), and maps.

Title: Trinigy Vision SDK
Year: 2009-2010
Version: 7.6.3, 8.0.2, 8.0.16
Developer: Trinigy
Platform: x32, Windows 2000/2003/XP/Vista
Compatibility with Vista: complete
Language: English
Medicine: Present
Size: 2.81 Gb

Description:

Company Trinigy, engaged in the development of game engines, today announced the Vision Game Engine version 7.6.3.
A new set of developer Vision (Vision SDK) provides a large list of new features, including improved lighting system, allowing you to create a physically accurate lighting as stationary objects and moving images, taking into account the effect of radiosity (indirect lighting), and normal maps.
A new feature, Radiosity is a graphics technology for creating natural lighting (including indirect lighting) based on a physical model of light propagation within a complex architectural environment. This technique allows you to accurately calculate the propagation path of light and carry out a full-color visualization of the scene ..
Another outstanding innovation became editor vForge, works on the principle «What you see is what you get» (What you see is what you get). The new editor allows you to make changes to the game, even when it is launched to directly assess the changes. This possibility could significantly reduce the time and cost of game development. To ensure the specific needs of project-specific editor vForge provides operational changes to the file by the developer.

Short description (ENG):

The Vision Engine - Engineered for Freedom
Every feature in the Vision Engine has been carefully engineered to empower game developers like you with more technical and creative freedom.
Freedom of Choice
Now in use on over 100 projects, the Vision Engine gives you the freedom to create the type of game you want (MMOs, FPS, RPG, casual, serious, etc) on the platform of your choice. It has been carefully optimized to efficiently utilize all available hardware resources on all major platforms (PC, Xbox360 ®, PLAYSTATION ® 3 and Nintendo Wii ®).
Freedom of Workflow
The Vision Engine boosts productivity and creativity by removing the technical limitations so often imposed on your design, art and programming departments. Superior run-time rendering, state-of-the-art exporters for the latest versions of Max and Maya, a WYSIWYG scene editor with a myriad of useful tools and fully integrated middleware technologies, a lighting editor, as well as model, scene and resource viewers help you quickly integrate, explore and visualize new ideas and push the limits of game design.
Freedom from Risk
In addition to mature and proven game engine technology, you receive a reliable technology partner that provides immediate, skilled support, helpful samples and documentation, continuous software updates and access to our secure Vision Developer's Site

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

[/code]

Thanks for downloading. Enjoy!

Autodesk Autocad 2011 Build E.115.0.0 Portable SP1 & MechaniCS 8.1.850

2011-01-21T12:18:00.002-08:00

Autodesk Autocad 2011 Build E.115.0.0 Portable SP1 & MechaniCS 8.1.850 (2010) | 1.11 GB

AutoCAD is a world leader in solutions for 2D and 3D design. As more graphic, 3D modeling to accelerate the design work and documentation, share models and develop new ideas. For AutoCAD available thousands of add-ons that can satisfy the needs of a wide range of clients. It's time to design a new way - while AutoCAD.

Year: 2010
Version: 2011 Build E.115.0.0
Developer: Autodesk
Bit depth: x32
Compatible with Windows 7: only with x32
Medicine: Present

System requirements:
* Operating system Microsoft ® Windows ® 7 Enterprise, Ultimate, Professional or Home Premium
* Windows 7: Dual-Core Intel ® Pentium ® 4 or AMD Athlon ® with 3 GHz or higher, supports SSE2.
* 2 GB of RAM
* 1,8 GB hard disk space for installation
* Support for screen resolution 1024 x 768 mode and «true color»
* Browser Microsoft ® Internet Explorer ® 7.0 or later
* Install a DVD or by downloading

Additional requirements for 3D modeling:
* Intel Pentium 4 or AMD Athlon processor with 3 GHz or higher, or dual-core Intel or AMD 2 GHz or higher
* At least 2 GB of RAM
* Additional 2 GB hard drive, in addition to the free space required for installation.
* Video adapter class workstations with the memory of at least 128 MB that supports screen resolution of 1280 x 1024, the regime of «true color», Pixel Shader 3.0 and Microsoft ® Direct3D ®

New features of AutoCAD 2011 is called a true technological breakthrough, which will please many millions of users of this software product:
* AutoCAD 2011 is now a parameter, and now any changes between objects are supported by user defined relationship. This significantly reduces the time to make changes to the projects.
* The emergence of tools to work with arbitrary shapes became possible to create and analyze the most complex three-dimensional objects. In addition, 3D printing is now supported, so it's easier to get prototypes and physical prototypes.
* By popular demand of international community of users Autodesk (AUGI) in AutoCAD 2011 strengthened, with the format of PDF. PDF files can be used as the substrate, and improved the quality of imports into PDF. This will facilitate data exchange between all interested parties in the project.

Additional Information:
* Treatment in the file install.txt
* Std.rar - archived database Mehaniksa. Before using the assembly std.rar to decompress

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

Rhinoceros 4 SR8 x86 English. Includes Video Tutorials

2011-01-21T12:18:00.000-08:00

Rhinoceros 4 SR8 x86 English. Includes Video Tutorials 2010 | 4.01 GB

Rhinoceros - a commercial software for three-dimensional NURBS modeling and production of Robert McNeel and Associates. Rhinoceros can create, edit, analyze, and translate NURBS-curves, surfaces, bodies in Windows, giving you unprecedented freedom, flexibility, ease of modeling, even very sophisticated jewelry. The required accuracy for the design, prototyping, engineering design, analysis and production of various products - from aviation to the jewelry industry. Compatible with all your other design, drafting, CAM, engineering, analytical, visualization, animation and illustration software. This software is so easy to learn and use, that you can focus on design and visualization without worrying about the features of the program.

1) Rhinoceros 4 SR8 x32 English:

Year: 2010
Producer: Robert McNeel & Associates
Software version: 4.0 SR8
Language: English
Medicine: Yes

System requirements:
* Operating system Microsoft 2000, Windows XP Pro, Windows XP Home, Windows Vista, Windows 7.
* CPU Pentium, Celeron, or higher.
* Minimum 200 MB of free hard disk space.
* 512 MB RAM, 1GB recommended
* Graphics Card OpenGL.
* Three-button mouse driver installed.
* Optional 3-D digitizer.
* Optional 3-D printer.

Installation and activation:
1. Mount image and install the application to initialize the version of "SR2"
2. When prompted, enter the serial number "RH40-QKTG-T8AX-3F9E-0FB8-8MA5", or generate a serial number key generator, located in the folder "License\Rhino4SR2 \"
3. Update the application by selecting one of the following options:
* To upgrade to version SR6: install the update from the folder "RMP_Rhino4SR6Update_x32", to install or copy with replacement "Rhino4.exe" from the folder "\License\Rhino4SR6\" folder\Rhinoceros 4.0\System \, or run the patch from folder "\License\Rhino4SR6\", press "Patch" and specify the location of the file "Rhino4.exe", complete the procedure.
* To upgrade to version SR7: install the update from the folder "RMP_Rhino4SR7Update_x32", by installation, run the patch from the folder "\License\Rhino4SR7\", press "Patch" and pointing to a file location "Rhino4.exe", complete the procedure.
* To upgrade to version SR8: install the update from the folder "RMP_Rhino4SR8Update_x32",to install or copy with replacement "Rhino4.exe" from the folder "\License\Rhino4SR8\" folder \Rhinoceros 4.0 \ System \, or run the patch from folder "\License\Rhino4SR8 \", press "Patch" (first button on the left) and specifying a file location "Rhino4.exe", complete the procedure.

Programs and Features:
* The image RhinoCeros 4 SR2 treatment
* Update SR6 treatment
* Update SR7 treatment
* Update SR8 treatment
* Rhino Training Level1 English (msi pdf)
* Rhino Training Level2 English (msi pdf)
* Flamingo Studio Quality Rendering (pdf)
* Manual. V-Ray for Rhino (pdf)
* Materials. V-Ray for Rhino (pdf)
* Rhino 4.0 Service Release (pdf)
* Rhino 4.0 User's Guide (pdf)

2) Rhino 4.0 Essential Training:

Year: 2010
Producer: Lynda
Country: United States
Language: English
Author: Dave Schultze
Format: Clips QuickTime (. Mov)
Video: AVC 640x360 15fps ~ 100Kbps
Audio: AAC 48kHz 2ch 96Kbps

The course Essential Training Dave Schultze author shows how to use modeling tools 3D NURBS-based in Rhino 4.0 to create products from robots to full-size aircraft. This course focuses on using Rhino 4.0 to industrial design and prototyping with an overview of common 3D terminology and using specific examples. Along with a detailed consideration of the interface Rhino, the course includes an introduction to creating 3D analyzing processes based on three pillars Rhino: curve, surface and solid. As for me, the course is not bad, detail for beginners the basics of working with tools, from simple to complex.
Exercise files are included.

Contents:
1. Basic 3D Terminology
2. Navigation
3. Introduction to the Interface
4. Workflow Basics
5. Drawing: 2D Geometry
6. Modeling: 3D Surfaces
7. Modeling: 3D Solids
8. Modeling Aids
9. Editing and Transforming Objects
10. Analysis and Degrees
11. File Documentation and Collaboration
12. Prototyping

3)Video2Brain. Rhino 4 basics of 3D modeling:

Year: 2010
Manufacturer: Video2Brain
Author: Andreas Moos
Length: 6:45 hr
Language: German
Sample Files: present
Video Format: Videos Flash Video (. Flv) in an interactive shell
Video: VP6 1280 x 720 16:9 15fps ~ 260 kbps
Audio: MP3 44,1 kHz 1ch 96 kbps

Rhino provides the tools to model your ideas, sketches or scanning data accurately and to prepare for rendering or animation. In this video tutorial shows you Andrew Moss, Authorized Rhino Trainer and experienced 3D visualiser how to create curves and surfaces, and which offers many opportunities for Rhino - all directly illustrated with examples from practice. He places much emphasis on explaining all the steps to the finished model to be easily understood and also gives tips for useful extensions.

??ntent:
* Introduction
* The program interface
* Drawing in 2D
* Accurate Drawing
* Edit curves
* Transform
* Areas
* Solid
* Practice Workshops
* Kitchen Aid
* Outside the box

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

Manusoft Unveils IMOLD 10 Service Pack 2.0 for SolidWorks

2011-01-21T12:15:00.002-08:00

Manusoft Unveils IMOLD 10 Service Pack 2.0 for SolidWorks 2007-2010 | 472 MB

Singapore's Manusoft Technologies Pte. develops and powerful, but at the same time easy to use 3D application for automated Mold Design (CAMD). Its main strategy is focused on introducing advanced technologies to address Design industry of precision instruments and their development. The company constantly strives to maintain a competitive advantage through the use and application of new technologies in software bespechenii.

Currently, designers of molds, using products SolidWorks Corp., Have a fairly wide range of partners, the company developed specialized applications that can help in this work. Deserve mention block libraries and other components of the molds, and packages MoldWorks SplitWorks. But beyond all the advanced Singaporean Manusoft Technologies
Pte Ltd. It offers one of the most complete package for designing molds, which will certainly be useful to users of SolidWorks. This package, called IMOLD, consists of a series of interconnected modules that help the designer step by step to design the mold at all stages.

Key features Manusoft unveils IMOLD for SolidWorks:

- Data Preparation
Used to prepare the model for the design of the mold. One of the most useful aspects of this function - the ability to create a derived part without changing the original model. This tool is also used for the correct orientation of components during casting.
- Project Control
Loads a new product model in SolidWorks. Developers call this function gateway to all other modules IMOLD - at this stage we introduce all the basic information about the project.
Project Control module automatically creates a structure assembly of the mold: the file of the main assembly (the assembly of the upper level) and the files of the original model, the matrix, punch and slide. In general, there is an impression that the developers IMOLD built into the system a mini-PDM, which unobtrusively and organically accompanies the designer throughout the work, organizing a clear and orderly file structure of the project, which has a positive effect on its quality.
Among other things, Project Control module allows a designer to choose the units and type of material (eg plastics), after which the system automatically suggests a shrinkage factor, which if necessary can be replaced by any dimensionless quantity defined by the user.
- Prefix name
Assigned a status name, which will then serve as the first part of the names of all the details are automatically created IMOLD.
- Core / Cavity Builder
The module construction of the matrix and punch - one of the most powerful tools in the arsenal IMOLD. His menu includes a variety of items. Draft Analysis feature allows you to test the model for the presence of zero and negative slopes. This is certainly a very useful thing, especially for testing models derived from other customers.
- Parting lines and Parting surfaces
Designed to create curves and surfaces connector matrix, punch, sliders and other elements
ments. The features of these functions is very broad. In addition to fully automatic separation of surface models for the matrix and punch a large number of purely manual and interactive ways to do the same. This combination of features provides flexibility.
Automatic separation of forming the matrix and punch - a convenient and easy to
using the function.
- Patch Holes
Under Utilities has an interesting feature Patch Holes, which makes it easy (almost "on the fly") to patch any holes in the forming surfaces.
- Insert Creator
Menu item under the title, step by step guides the user through the process of creating inserts
matrix and the punch. The system divides them into "core" (one for the matrix and punch) and "helper." The main insertion is automatically generated, while the additional need to be defined constructor. Additional inserts are automatically added to the Makefile socket that you created earlier. Users can also use this tool to determine the size of the matrix and the punch holder and clarify dimensions of blanks for key insertion.
- Layout Designer
Thanks to this module is much easier designing multi-molds. Established in the previous stages the matrix can be repeated several times and is located in the desired constructor order. This should clarify the location of the matrix - horizontally, vertically or in a circle - and enter the number of seats. In case of change of location or quantity of the system allows you to immediately see it on the screen. So provided "feedback" and the designer can immediately evaluate how it will look new version. In addition, there are editing tools. For example, you can change the distance between nests or move a separate jack (a very powerful feature).
- Feed Designer
An important component of any molds - injection system. At this stage of design in business comes included with the module IMOLD Feed Designer. The user is offered four menu items: two
for the design and modification of runners, two - for the injection channels. In the design process are given by the size and location of the runners and channels (the location of both can be changed along the way that solves this problem in the best way). Form channel injection can
vary from straight lines to splines, and if necessary it can be easily changed.
Sprues and channels are allowed to move, copy and delete. You can also change their defining parameters.
- Mold-Base Designer
Allows the user to select an appropriate unit of a dozen libraries, building blocks of molds from various manufacturers, such as DME, Hasco, PCS, Progressive, Futaba, Misumi, etc. The selected block is automatically displayed on the screen, which is convenient. If necessary, all options at this stage may be edited. Parameters for all members of the unit elements can be changed easily - so the user can create their own
library-based building blocks. The system does not change only certain fields, such as name of manufacturer original block.
- Ejector Pin
Module design ejector causes ebuild nest molds and provides an opportunity to choose suitable ejectors from the set of libraries from different vendors. When selecting a particular ejector some of its parameters are fixed, while others may be changed. Apart from the usual, cylindrical, and supported pushers "with key", which prevents pushers with the spatial profile of the buoyancy of the crank.
- Slide Designer
The next step is designing the mold - the construction of sliders, which is designed to help unit
Slide Designer. Its menu contains a total of five points. Here we set all
parameters of the slide, including the manufacturer and type of slide. When the selected or user-defined slider is mirrored with respect to the standard configuration, you can step back and add the necessary elements - for example, guides.
- Cooling Designer
In addition, IMOLD provides intuitive tools for the design of cooling channels of complex spatial configuration. In this case, the constructor has the opportunity to consider also the technological aspects - such as how to drill holes for the cooling system

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/Mxn4hvX/imo10.part1.rar
http://www.fileserve.com/file/kFnhxeW/imo10.part2.rar
http://www.fileserve.com/file/RevdKTy/imo10.part3.rar
http://www.fileserve.com/file/YngmY2s/imo10.part4.rar
http://www.fileserve.com/file/KKapbXQ/imo10.part5.rar

From Hotfile.com:

http://hotfile.com/dl/84145967/57e9a68/imo10.part1.rar.html
http://hotfile.com/dl/84145979/1680726/imo10.part2.rar.html
http://hotfile.com/dl/84145985/63b1d9a/imo10.part3.rar.html
http://hotfile.com/dl/84145998/1fd8547/imo10.part4.rar.html
http://hotfile.com/dl/84146011/a00a793/imo10.part5.rar.html

From Filesonic.com:

http://www.filesonic.com/file/34260161/imo10.part1.rar
http://www.filesonic.com/file/34260195/imo10.part2.rar
http://www.filesonic.com/file/34260065/imo10.part3.rar
http://www.filesonic.com/file/34260235/imo10.part4.rar
http://www.filesonic.com/file/34260171/imo10.part5.rar

Mastercam X5 14.0.4.33

2011-01-21T12:15:00.000-08:00

A professional level, with extensive capabilities in modeling and a solid set of strategies for treatment, with an accessible and user friendly interface.

ounded in 1984, CNC Software Inc. is one of the first companies in CAD / CAM industry, the goal was to create software for use on a personal computer. For the concept was adopted by the idea of supplying low-cost CAM system, posted on a personal computer, as most other systems is a road at a cost, CAD-oriented products. CNC Software Inc.bylo one of the first venture between CAD / CAM software, is equally suitable for the job-machine operators and engineers and providing them with the tools for practical solutions to their problems.

Mastercam - software for milling, turning, EDM and wood on the machines with numerical control (CNC). Company CNC Software Inc., More than 25 years creating and improving the system and is one of the world leaders in CAD / CAM industry. The original version was a dvuhrazmerny (2D) CAM, and so no less for that period of Mastercam was one of the first packet CAM, which included the ability of CAD, allowing users to quickly and easily design the necessary engineering products.

According to the latest independent ekspernoy company CimData (July 2009), Mastercam has more than 147,600 installations worldwide and is already 15 years the most common CAD / CAM system.

A brief overview of the main features Mastercam:

- Milling 2 - 5-axis machining
- Lathes and milling
- Electrical discharge machining
- Wood from 2 to 5 axes
- Sculptural modeling and engraving
- Solid modeling
- 2D and 3D wireframe and surface modeling, design drawing

New features added to the Mastercam X5:

- New OptiRough toolpath
- New Hybrid Finish toolpath
- Improved Multiaxis toolpath interface
- New Multiaxis toolpaths
- Mastercam Machine Simulation
- New Dynamic Rest Mill toolpath
- New Dynamic Contour toolpath
- Island Facing in 2D HST toolpaths
- Circle Mill improvements
- Dynamic Plane improvements
- ISCAR HEM (High Efficiency Machining) support
- Transform toolpath enhancements
- Feature Based Machining (FBM) Mill and Drill enhancements
- New tool library format
- Setup sheet / ActiveReports improvements
- Block Drill support in FBM Drill
- Automatic Toolpathing (ATP) enhancements
- Ability to assign colors to solid faces
- Advanced CAD model curvature analysis
- Improved bolt circle creation
- More powerful post processing customization
- New Plunge Turn toolpath in Lathe
- Roughing and Cutoff toolpath enhancements
- New power library format in Wire
- New Art toolpaths

Mastercam X5 14.0.4.33

More information about new Mastercam X5 here: www.mastercam.com

Name: Mastercam X5
Version: 14.0.4.33 (32bit & 64bit)
Language: English
Operating system: Windows XP/Vista/Seven

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

Unity 3D 3.3.1 x32/x64/Mac OS X (2010)

2011-01-21T12:14:00.001-08:00

Unity 3D - a tool of development and multiplatform engine for 3D games under Mac OS X and Windows, with the ability to work in a browser. The latter is particularly interesting, since such decisions are very few, and often they work very slowly. A complete description of the features is the official site and their review will require more than one article. I will mention only the possibility to use C #, Boo (a dialect Python) and javascript, which is compiled into native byte code. And that, based on Unity3D already being developed several online browser-based games. This is facilitated by the presence of Fullscreen mode, which runs right mouse button (like in Flash it can not be used). Features of the engine, though not unlimited, but they are very large. The ability to import models directly from the 3d editor, is one of the most important. In other engines have to convert the model, that there was an opportunity to use it. However, Unity can load the model formats *. max, *. fbx, and many others, which greatly simplifies the work on the project. Likewise, supports bones, which allows you to create complex animated characters. Just Unity has a very intuitive user interface and many opportunities for its configuration.

Year: 2010
Version: 3.3.1
Developer: Unity
Bit depth: x32/x64
Compatibility with Vista: complete
Compatible with Windows 7: complete
Language: English
Medicine: Present

System Requirements for Unity Authoring:
* Windows: XP SP2 or later; Mac OS X: Intel CPU & "Leopard" 10.5 or later. Note that Unity was not tested on server versions of Windows and OS X.
* Graphics card with 64 MB of VRAM and pixel shaders or four texture units. Any card made in this millennium should work.
* Using Occlusion Culling requires GPU with Occlusion Query support (some Intel GPUs do not support that).
* The rest only depends on the complexity of your projects!.

System Requirements for Unity iOS Authoring:
* An Intel-based Mac
* Mac OS X "Snow Leopard" 10.6 or later
* The rest only depends on the complexity of your projects!

System Requirements for Unity-Authored Content:
* Windows 2000 or later; Mac OS X "Panther" 10.3.9 or later.
* Pretty much any 3D graphics card, depending on complexity.
* Online games run on all browsers, including IE, Firefox, Safari, and Chrome, among others.

New Features:
* Managed. NET DLLs can now be placed in the project folder and can contain script code, including MonoBehaviours, EditorWindows and ScriptableObjects. This allows you to move any code into a DLL, making code sharing between projects easier, and making it easier for middleware developers to create libraries without sharing the source code. This was introduced in Unity 3.0 but was not mentioned in the release notes.
* Scripting: Added GL.InvalidateState to flush the internal renderstate cache in Unity. This is mostly useful when writing native code plugins that access the 3D device.
* Audio: Added AudioSettings.outputSampleRate. Returns the mixer's output rate; use this to calculate the precise hertz range returned from GetSpectrumData.

Fixes:
* Editor: Fixed out of memory errors when editing very large terrains due to the Undo system.
* Editor: Fixed "too many open files" error when reimporting a large project with many shaders on Mac OS X.
* Editor: Some textures would not say "Texture not yet compressed" when importing with the "Compress Textures" preference turned off.
* Editor: Fixed a bug where upgrading a Unity 2.x project with normal maps would leave some normal maps not marked as Normalmap type properly.
* Terrain Engine: Unity 2.x Soft Vegetation tree shaders had lighting upside down:)
* Shaders: fixed Surface Shader compilation errors with large custom output structures.
* Shaders: wrong syntax in UnityCG.glslinc file (for GLSL shaders).
* Graphics: fixed Projector crash in some circumstances.
* Graphics: fixed tangent vectors not bound correctly with GLSL shaders on some GPUs.
* Graphics: fixed dynamic batching corrupting vertex colors on Direct3D.
* Graphics: fixed GL.TRIANGLES rendering with large triangle counts on Direct3D.
* Graphics: fixed some hiccups when changing non-uniform scale of meshes.
* Graphics: Fixed dynamic batching index overflow.
* Audio: GetOutputData / GetSpectrumData API changed so it accepts an pre-allocated array instead of allocating on every call. Old API is deprecated and marked obsolete.

Installation on Windows:
* Download Unity 3.1 and activate with a free "Indie Licence" (you can select Internet Activation).
* Download the patch and extract it from the zipped archive (um3_b94.exe)
* Start um3_b94.exe - it will sit in your system tray. (It can be run from any directory)
* Start unity3d as normal, or from Monodevelop - it should come up in "Pro" mode. (Dark Grey GUI)
* Patched to -> Unity Pro, Asset Server and Android Advanced (Android Advanced needs Registered Android SDK from Google)
* With Unity running. Go to Help> About Unity. Bottom right corner of pop-up window shows you what is currently licensed.
* Note: If you had a previous installation of Unity (even if you uninstalled it) and you don't see the option to load the Bootcamp Demo in Unity 3.1 on start-up, you can find it in the following Directory (it's a installation glitch)
* Vista or Windows 7 C: \ Users \ Public \ Documents \ Unity Projects \ Bootcamp Demo
* XP C: \ Documents and Settings \ All Users \ Documents \ Unity Projects \ Bootcamp Demo
* Move the folder to My Documents \ My Unity Projects

Installation on Mac OS X:
* Install Unity 3.1.0. extract patched executable to Unity.app / Contents / MacOS overwriting original

3D Home Architect Design Suite Deluxe v8.0

2011-01-21T12:13:00.001-08:00

3D Home Architect Design Suite Deluxe v8.0 | 808 MB

And again for those who are engaged in modeling of buildings - good old 3D Home Architect of Broderbund Software. Software 3D Home has a very intuitive and easy to use interface with and this will be a very good start for those who are tied with the construction project, but a bad sense of computers.

System requirements:
Windows 2000 SP4/XP (Home and Pro) SP2/Vista; Pentium or another processor, 64 MB RAM, 700 MB free hard disk space, Video card with 32 MB VRAM; Display resolution 1024X768

Activities you plan layout of the house and vnutriney situation then you should vospolzovatsya this program. In fact, this "set the home of the architect." It provides a rich set of tools for design, layout, furnishings and color wallpaper, upholstery, etc.; typical layout of houses in one, two or more floors, supporting video, the ability of different modes of viewing the project and a spreadsheet for budgeting. 3D Home package is simple to use: after a brief acquaintance with him, you will surely draw lines and place objects on the plane home.

The program automatically warns about the wrong placement of objects, for example, if you accidentally put the couch on the coffee table. After a brief acquaintance with him, you will surely draw lines and place objects on the plane home. New version of 3D Home Architect provides: - a rich set of tools for design, layout, furnishings and color wallpaper, upholstery, etc. - typical layout of houses in one, two or more floors - auxiliary video - the possibility of different modes of viewing the project and the spreadsheet for cost estimates in 1500 Best-Selling Home Plans - a unique collection of ready-made solutions of planning residential and business premises with detailed plans, the actual performance and the ability to search and organize information.

After installation, place the file 3DHAD8 it Russifiers. Run the program, the language will automatically switch to Russian.
3DHAD8.exe-it Russifiers. 3dhadsd80.bin 3dhadsd80.cue and the files are disk image, mount them on a virtual drive using Daemon Tools or Alcohol 120. Then install the 3D Home Architect Design Suite with a virtual drive. Then russifitsiruete program using the file 3DHAD8.exe. Language change in the program settings.

Information:
3D Home Architect provides:

- Rich set of tools for design, layout, furnishings and color wallpaper, upholstery, etc.
- Typical layout of houses in one, two or more floors - auxiliary video - the possibility of different modes of viewing the project and a spreadsheet for budgeting in 1500 Best-Selling Home Plans
- A unique collection of ready-made solutions of planning residential and business premises with detailed plans, actual performance and the ability to search and organize information.

Product Features:

- Unique 3D-modeling tools and editing.
- Work in a single project manager.
- The project to integrate with related specialties (GP, QL, QM, TX, IA, etc.).
- Ability to use additional applications for AutoCAD (eg, ASAP GraphiCS).
- Automatic generation of two-dimensional plans and sections with three-dimensional model.
- Dynamic link volume model with the documentation and two-dimensional drawings.
- Dynamic link dimensional chains with the objects of the drawing.
- Export specifications in Microsoft Access and Microsoft Excel.
- Data import LandXML format directly into the current project Autodesk Architectural Desktop to create highly accurate models of the landscape.
- The perfect set of tools to work with arbitrary shapes of objects.
- Built-photorealistic renderer projects (VIZ Render).

Version: Deluxe 8.0
Developer: PunchSoftware
Bit depth: 32bit
Compatibility with Vista, 7: only x86 (32-bit)

No Password | Single Extraction

Download from Fileserve.com:

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!

Autodesk 3Ds Studio Max 2011 (x86/x64)

2011-01-21T12:08:00.001-08:00

Autodesk 3Ds Studio Max 2011 (x86/x64) | 11.26 GB

Autodesk 3ds Max 2011: is a comprehensive, integrated solution for 3D modeling, animation and rendering solutions for professionals in the field of game development, visual effects and design.

- Powerful 3D Modeling - Advanced set of tools for modeling and texturing helps you work faster and more efficiently.

- Develop tools and animation of characters - Integrated set of tools for character animation (CAT) is an advanced system of rigging and animation.
- Several built-in renderer - Artists can create realistic or stylized work with closely integrated into the 3ds Max scan line, and mental ray ® rendering module, including unlimited network rendering mental ray for rendering acceleration.
- Enhanced support for manufacturing processes - With support for C and. NET application developers can integrate 3ds Max into current manufacturing processes.
- Import / export FBX to Unreal - Creation and animation of models in Autodesk 3ds Max, export to Autodesk ® FBX ® import and Unreal ® Editor.

Autodesk 3ds Max Design 2011: is a comprehensive, integrated solution for 3D modeling and animation tools, used by experts in the field of architecture, construction, engineering and visualization.
- Rapid iteration of the project - Thanks to the excellent interaction between 3ds Max Design with the products of families of AutoCAD ®, Revit ® and Autodesk ® Inventor ® workflow users are not violated when the reverse changes. The product also supports more than 30 formats, 2D and 3D data.
- Exact calculation of natural lighting - 3ds Max Design - one of the instruments adopted by the CNRC to analyze and calculate the effects of reflected light and natural light. In addition, direct lighting can be studied in the viewport in real time.
- High quality imaging - Proven technology allows designers and visualization specialists to create cinema-quality images using:
- A set of advanced tools for polygon modeling
- Built-in animation, character creation and effects
- Unlimited network rendering with mental ray

System requirements:
32-bit 3ds Max or 3ds Max Design for Windows
Operating System: Microsoft ® Windows ® 7 Professional, Microsoft ® Windows Vista ® Business (SP2 or higher) or Microsoft ® Windows ® XP Professional (SP2 or higher)
For the overall animation and playback of individual parts and products of small and medium difficulty (not more than 1000 items or 100000 polygons):
- Processor Intel ® Pentium ® 4 with a clock speed of 1.4 GHz or equivalent AMD ® processor with SSE2 technology
- 2 GB RAM (4 GB recommended)
- 2 GB of swap space (4 GB recommended) **
- 3 GB of free hard disk space
- Graphics card that supports Direct3D ® 10, Direct3D 9 or OpenGL ® † (at least 256 MB of memory for your video card, 1 GB recommended or higher)
- Three-button mouse driver
- Drive DVD-ROM † †
- Browser Microsoft ® Internet Explorer ® 7.0 or later or Mozilla ® Firefox ® 2.0 or later
- Internet connection to download files, and access to Autodesk ® Subion Aware
64-bit 3ds Max or 3ds Max Design for Windows
Operating System: Microsoft ® Windows ® 7 Professional x64, Microsoft ® Windows Vista ® Business x64 (SP2 or higher) or Microsoft ® Windows ® XP Professional x64 (SP2 or higher)

Original title: Autodesk 3Ds Max & 3Ds Max Design 2011
Publication Type: License
Developer: Autodesk Inc
Year: 2010
Platform: PC
Version: 2011
Language: English

http://www.fileserve.com/file/Yj9Bgex/hi_3Ds.Studio.Max.2011.part01.rar
http://www.fileserve.com/file/kYaNsH3/hi_3Ds.Studio.Max.2011.part02.rar
http://www.fileserve.com/file/aqX4z9j/hi_3Ds.Studio.Max.2011.part03.rar
http://www.fileserve.com/file/WKXNZAR/hi_3Ds.Studio.Max.2011.part04.rar
http://www.fileserve.com/file/FKjwyRR/hi_3Ds.Studio.Max.2011.part05.rar
http://www.fileserve.com/file/TuwDKxX/hi_3Ds.Studio.Max.2011.part06.rar
http://www.fileserve.com/file/ej9mjT3/hi_3Ds.Studio.Max.2011.part07.rar
http://www.fileserve.com/file/JrYNHWa/hi_3Ds.Studio.Max.2011.part08.rar
http://www.fileserve.com/file/uXvrFBF/hi_3Ds.Studio.Max.2011.part09.rar
http://www.fileserve.com/file/YVa3D9c/hi_3Ds.Studio.Max.2011.part10.rar
http://www.fileserve.com/file/jMcvkPZ/hi_3Ds.Studio.Max.2011.part11.rar
http://www.fileserve.com/file/GJ9HW9T/hi_3Ds.Studio.Max.2011.part11.rar
http://www.fileserve.com/file/vFbcyS3/hi_3Ds.Studio.Max.2011.part12.rar
http://www.fileserve.com/file/tjTVRTS/hi_3Ds.Studio.Max.2011.part13.rar
http://www.fileserve.com/file/mfCD2hF/hi_3Ds.Studio.Max.2011.part13.rar
http://www.fileserve.com/file/jbGEk8z/hi_3Ds.Studio.Max.2011.part14.rar
http://www.fileserve.com/file/w5uMn4q/hi_3Ds.Studio.Max.2011.part15.rar
http://www.fileserve.com/file/k9sBkfX/hi_3Ds.Studio.Max.2011.part16.rar
http://www.fileserve.com/file/mSBzAqV/hi_3Ds.Studio.Max.2011.part17.rar
http://www.fileserve.com/file/YmhnTzj/hi_3Ds.Studio.Max.2011.part18.rar
http://www.fileserve.com/file/Zyaewaf/hi_3Ds.Studio.Max.2011.part19.rar
http://www.fileserve.com/file/p8k4rZg/hi_3Ds.Studio.Max.2011.part20.rar
http://www.fileserve.com/file/mmaX25Y/hi_3Ds.Studio.Max.2011.part21.rar
http://www.fileserve.com/file/saetNvT/hi_3Ds.Studio.Max.2011.part21.rar
http://www.fileserve.com/file/KyFKAXg/hi_3Ds.Studio.Max.2011.part22.rar
http://www.fileserve.com/file/yNS7Pmf/hi_3Ds.Studio.Max.2011.part23.rar
http://www.fileserve.com/file/Q2fZJJ9/hi_3Ds.Studio.Max.2011.part24.rar
http://www.fileserve.com/file/Dmt7dTN/hi_3Ds.Studio.Max.2011.part25.rar
http://www.fileserve.com/file/VRn2HGV/hi_3Ds.Studio.Max.2011.part26.rar
http://www.fileserve.com/file/jY5XUye/hi_3Ds.Studio.Max.2011.part27.rar
http://www.fileserve.com/file/kMdBRNM/hi_3Ds.Studio.Max.2011.part28.rar

Vue 8.5 Xstream PC/MAC

2011-01-21T12:07:00.002-08:00

E-on Vue 8.5 Xstream (PC/MAC) | 576 MB + 980 MB

Vue 8 xStream offers professional CG artists a complete toolset for creating and rendering exceptionally rich and realistic natural environments in 3ds Max Maya, LightWave, Cinema 4D and Softimage Access all the power of the world's leading 3D Digital Nature solution directly rom within your favorite application. Create and edit beautifully detailed natural environments using your application's standard manipulators Render everything together inside 3ds Max, Maya, LightWave, Cinema 4D or Softimage with full interaction between Vue and native elements, including 2-way mutual shadow casting, reflection, refraction and GI.

DISK1: Windows and MACOSX installation files
DISK2: Extras (same as our 8.0 Release)

Installation:

Unpack, burn & install.
Check Crack/install.txt on DVD1

No Password | Single Extraction

Download from Fileserve.com:

http://www.fileserve.com/file/K7d8ZsN/shareislove_Vue85D1.part1.rar
http://www.fileserve.com/file/EWBcZDz/shareislove_Vue85D1.part2.rar
http://www.fileserve.com/file/6yvUGAj/shareislove_Vue85D1.part3.rar
http://www.fileserve.com/file/T5uMYNK/shareislove_Vue85D2.part1.rar
http://www.fileserve.com/file/MPMHYQh/shareislove_Vue85D2.part2.rar
http://www.fileserve.com/file/dbTf6ev/shareislove_Vue85D2.part3.rar
http://www.fileserve.com/file/SjNbBbP/shareislove_Vue85D2.part4.rar
http://www.fileserve.com/file/wYkjcVH/shareislove_Vue85D2.part5.rar

From Hotfile.com:

From Filesonic.com:

Thanks for downloading. Enjoy!