tag:blogger.com,1999:blog-42544549551675264472024-08-30T11:37:17.872+08:00Repair Guide for those who want to learn to repair there own gadgetsRonelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.comBlogger10125tag:blogger.com,1999:blog-4254454955167526447.post-7416147760127952582018-01-03T16:05:00.000+08:002018-01-03T16:05:25.031+08:00

Case Study : Dell LaptopPart No : QAL80 LA-7781PProblem : No DisplaySolution : Found that only stuck in 0.150 amp on PSU. Step down Ic (3.3 v /5 v ) heating.Checked For short Circuit Not Found. Then checked the RTC 3.3 v it was 0 volt  Replaced RTC Cell Then Also no voltage RTC. At Last Found  Pf LeakyLaptop Working Fine

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com0tag:blogger.com,1999:blog-4254454955167526447.post-29675688229441295722018-01-02T15:49:00.000+08:002018-01-02T15:49:47.526+08:00

Model:Acer Aspire E5-573MB ID:ZRTCase Study Problem : plugged in adaptor no power on and not chargingSolution : First I check VIN present, no auxuliary voltages at battery connectors.I check with PSU 19V, it takes 0.28amp then decrease voltage from 19v to 17v.now the laptop power on and working fine. So the problem is located at the power IC pin(6) 2.59v (acdet).I check voltage divider working ok

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com1tag:blogger.com,1999:blog-4254454955167526447.post-1251753643409541182017-12-29T16:44:00.001+08:002017-12-29T16:45:07.063+08:00

Old Motherboard Auto On and Can't Save Time Problem: Auto on and can't saved time even though it was replaced with a new CMOS battery. Action taken: Check crystal oscillator no luck, resolder frequency generator no luck, check two 22pf 1 is shorted so have to replace.

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com0tag:blogger.com,1999:blog-4254454955167526447.post-59424628525894396972011-07-15T09:37:00.000+08:002011-07-15T09:37:00.751+08:00

Each print a document or image, then the level of ink in the cartridge will be reduced and a time will run out. Maybe you can refill the printer cartridges, but your computer will continue to detect that the cartridge is empty, and your printer will not print any documents. For the first option, of course will require substantial money for buying two cartridges. For the second option, of

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com0tag:blogger.com,1999:blog-4254454955167526447.post-72075872532687008452011-07-14T09:18:00.000+08:002011-07-10T16:39:47.904+08:00

Not just counting how many times the printer is done printing, the printer also calculate how many times do the head cartridge cleaning, and ink absorber on the printer you will be considered full at a later time. Error code at the beginning was the E8 and then will turn into E27. The following is the step by step how to reset error “Ink Absorber is Full” with error code E8 of E27 on Canon

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com8tag:blogger.com,1999:blog-4254454955167526447.post-21325480479925867482011-07-13T09:21:00.000+08:002011-07-13T09:21:00.215+08:00

The Epson C45 printer ink cartridges could be refilled manually. Unfortunelly, although the ink tank already refilled but the   run out/empty ink message will still appear  and printer stop to run. Reset can be done if the premises software does not work sometimes have to use the resetter. The following tutorial will explain how to reset ink level of  Epson C45 by using

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com1tag:blogger.com,1999:blog-4254454955167526447.post-3437674719875656422011-07-12T08:31:00.000+08:002011-07-12T08:31:00.119+08:00

Error code blink green 4 times and orange  1 time that means the ink runs out. you can reset it manually or using  resetter program. In this tutorial  using a method resetter IPTool: Step 1 : Download IPTool.exe , if the link not work you can find it using google key word iptool ip1600 Step 2 : Run IPTool.exe reset ink couter Reset Black  to reset black ink Reset

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com0tag:blogger.com,1999:blog-4254454955167526447.post-12811304528114569472011-07-11T08:34:00.000+08:002011-07-11T08:34:44.239+08:00

This all happened when the error message appeared on my screen that my wastepad is already full and my printer's red button was blinking. Here how I did it: <click here for link> Downloaded Canon iP1980 Resetter Installed the resetter. Clicked "Lock Release" and ticked on ip1800 Checked "Cleaning" and EEPROM Clear" boxes Clicked on "Main" and "Platen" on "Clear Waste Ink Counter" header

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com0tag:blogger.com,1999:blog-4254454955167526447.post-85816024892544018282011-07-11T08:19:00.000+08:002011-07-13T13:21:05.322+08:00

To facilitate detection of damage or error on canon pixma printer, you can find out the meaning of the blink code. IT will be very useful for resolp error or trouble . Canon pixma IP1200, IP1300, IP1600, IP1700, iP1880, iP1980, there are two lights that blink code that is used as a green light and orange. The following error codes from the printer blink canon pixma IP1200, IP1300, IP1600, IP1700,

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com1tag:blogger.com,1999:blog-4254454955167526447.post-45137546699304050912011-07-10T08:15:00.000+08:002011-07-10T16:39:08.191+08:00

When the printer is turned on seems OK, but after the print a paper, it would appear error ink run out or Blink on Canon 13 times Orange lamp. This Step How To Resolv It : Step 1 : Press the Resume button until the printer sounds a long process, then release. Step 2 : If an Orange Blink 13 times, meaning black catridge also need a reset (having runout), and the picture is as follows: Step 3

Ronelexhttp://www.blogger.com/profile/10586230731799988131noreply@blogger.com11