Engineering and Quantity Surveying Topics

GYPSUM SUSPENDED CEILING ESTIMATE

2012-03-27T02:12:00.000-07:00

THIS IS AN ESTIMATE OF A TYPICAL GYPSUMBOARD SUSPENDED CEILING

ESTIMATE REFERENCE FOR DRYLING SYSTEM IN CEILING

2012-03-26T21:06:00.001-07:00

I HAVE ESTIMATED A DRYLINING SYSTEM FOR CEILING HERE IN DUBAI. WHICH CAN BE HELPFUL TO ALL ESTIMATOR AND QUANTITY SURVEYOR.

What is variations in FIDIC 1987

2012-03-26T11:09:00.004-07:00

Aas per clause 51.1

Alterations, Additions and Omissions

The Engineer shall make any variation of the form, quality or quantity of the Works or any part thereof that may, in his opinion, be necessary and for that purpose, or if for any other reason it shall, in his opinion, be appropriate, he shall have the authority to instruct the Contractor to do and the Contractor shall do any of the following:

(a) increase or decrease the quantity of any work included in the Contract,

(b) omit any such work (but not if the omitted work is to be carried out by the Employer or by another contractor),

(d) change the levels, lines, position and dimensions of any part of the Works,

(e) execute additional work of any kind necessary for the completion of the

Works, or

(f) change any specified sequence or timing of construction of any part of the Works.

No such variation shall in any way vitiate or invalidate the Contract, but the
effect, if any, of all such variations shall be valued in accordance with Clause 52.
Provided that where the issue of an instruction to vary the Works is necessitated
by some default of or breach of contract by the Contractor or for which he is
responsible, any additional cost attributable to such default shall be borne by the
Contractor.

Who Can Instruct Variations?

As per Clause 51.1-"The Engineer shall make any variation of the form, quality or quantity of the Works or any part thereof that may, in his opinion, be necessary and for that purpose, or if for any other reason it shall, in his opinion, be appropriate, he shall have the authority to instruct the Contractor to do and the Contractor shall do any of the following:"

-The Engineer can make a variation to the "Works".

What is Works ?

As per Clause 1.1

(f) (i) "Works" means the Permanent Works and the Temporary Works or either

of them as appropriate

(ii) "Permanent Works" means the permanent works to be executed
(including Plant) in accordance with the Contract.

example:

-Any work ( final product ) that the contractor leave behind like the block work, Steel window , concrete slab etc.

(iii) "Temporary Works" means all temporary works of every kind (other than Contractor's Equipment) required in or about the execution and
completion of the Works and the remedying of any defects therein.

example:

-All that is required to build the permanent works except contractor's equipment.

example:

Temporary office facility, shoring, temporary bracing for masonry walls, Temporay office etc.

2010-07-12T04:35:00.000-07:00

Computation for Rebar reinforcement weights

2009-07-22T05:28:00.000-07:00

Here is a simple formula for computing the weihgt of reinforcement

Weight = d²/162 the units will be on kg/m

Suspended Ceiling Bill of Quantitiy

2009-07-20T23:57:00.000-07:00

Ref	Description	Qty	Unit	Rate in AED	Amount in AED
	PRELIMINARIES
A	Supervision & co-ordination	item			217,600.00
B	Site accomodation & storage	item			26,000.00
D	Scaffolding & access	item			78,750.00
E	Production/working drawings	item			24,000.00
F	Insurances	item			39,000.00
G	O&M manuals &as-built information	item			10,650.00
H	Performance Guarantee	item			24,000.00
K	Fork lift for horizontal shifting	item			36,000.00
L	other priliminaries	item			129,000.00

TOTAL PRILIMINARIES - LUMPSUM FOR LEVEL 1 - 28					585,000.00
	CEILING FINISHES

	LEVEL1-13

	Common Areas
A	Ceiling to lift lobbies and corridors;2400AFFL;
	MF ceiling system with one layer 13mm
	plasterboard; tape & joint finish;10mm shadow
	line;painted with one mist coat & two finish coat
	vinyl matt emulsion inc allbeads,sealants and
	cot outs for services	2,013	m2	67.00	134,871.00

B	E/O plasterboard ceiling;recessed architectural
	coffer;2550AFFL; 1200x1200	104	no	220.00	22,880.00

C	E/O plasterboard ceiling; recessed grid ceiling;
	2475AFFL; Rockfon Koral or equal approved;
	24mm exposed grid with 600x600x15 mineral
	fibre title; linc plywood pattresses and cut outs
	for services	243	m2	198.00	48,114.00

D	Ceiling to service lift lobbies; 2400AFFL;MF
	ceilingwith one layer 13mm plaster board; tape
	& joint finish; 10mm shadowline; painted with
	one mist coat & two finish coats vinyl matt
	emulsio;inc all beads,sealants and cut outs for
	services	125	m2	67.00	8,375.00

E	Ceiling to garbage rooms;2400 AFFL; MF ceiling
	system with one layer 13mm plasterboard;tape
	& joint finish; 10mm shadowline;painted with
	one mist coat & two finish coats vinyl matt
	emulsion; inc all beads, sealants and cut outs
	for services	156	m2	67.00	10,452.00

F	Proprietary access panel; 600x600; non-fire
	rated	364	no	306.00	111,384.00

G	Temporary access panels for commissioning	208	no	40.00	8,320.00









	CEILING FINISHES
	LEVEL 1-13
	Apartments

A	Ceiling to living/bed room (C1); 2800 AFFL;
	MF ceiling system with one layer 13mm
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two inish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	16,326	m2	79.00	1,289,754.00

B	Ceiling to kitchen/entry/WC (C1); 2400 AFFL;
	MF ceiling system with one layer 13mm
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two inish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	3,801	m2	107.00	406,707.00

C	Ceiling to bathrooms (C1); 2400 AFFL;
	MF ceiling system with one layer 13mm
	moisture resistant plasterboard;glasswool
	insulation 14Kg/m3; tape & joint finish; 10mm
	shadowline; painted with one mist coat & two
	finish coats vinyl matt emulsion; including all
	beads, sealants and cut outs for services	1,360	m2	113.00	153,680.00

D	Ceiling to kitchen/entry (C2); 2400 AFFL; MF
	ceiling system with two layer 13mm fire rated
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two finish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	1,850	m2	148.00	273,800.00

E	Bulkhead (B!); 400mm; MF ceiling system with
	one layer 13mm plasterboard;glasswool insulation
	14Kg/m3; tape & joint finish; painted with one mist
	coat & two finish coats vinyl matt emulsion; including
	all beads,sealants and cut outs for services	920	m	68.00	62,560.00

F	Bulkhead (B2); 400mm; MF ceiling system with
	two layer 13mm plasterboard;glasswool insulation
	14Kg/m3; tape & joint finish; painted with one mist
	coat & two finish coats vinyl matt emulsion; including
	all beads,sealants and cut outs for services	793	m	93.00	73,749.00

	CEILING FINISHES

	LEVEL 1-13

	Apartments

A	Ceiling to kitchen/entry/WC (C5); 2400 AFFL;
	fixed within plasterboard ceiling; 24mm exposed
	grid with 600x600 vinyl faced plasterboard tile;
	cliped in grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services	2,128	m2	86.00	183,008.00

B	Ceiling to laundry (C5); 2400 AFFL;24mm exposed
	grid with 600x600 vinyl faced plasterboard tile;
	cliped in grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services	593	m2	86.00	50,998.00

C	Ceiling to bathrooms (C6); 2400 AFFL; fixed
	within plasterboard ceiling; 24mm exposed
	grid with 600x600 vinyl faced moisture resistant
	plasterboard tile PVC face to back of tile; cliped
	into grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services	1,891	m2	86.00	162,626.00

D	Pelmet; 18mm MDF; 3 sided; 490 girth; fixed on
	timber batten fixed to concrete soffit; void to soffit
	filled with insulation; painted with one mist coat
	& two finish coats vinyl matt emulsion; inc sealants	2,977	m	107.00	318,539.00

F	Proprietary access panel; 600x600; non-fire rated	234	no	306.00	71,604.00

G	Temporary access panels for commissioning	468	no	40.00	18,720.00








TOTAL AMOUNT - LUMPSUM FOR LEVELS 1 - 13					3,410,141.00
	CEILING FINISHES

	LEVEL 14-28(PROVISIONAL)

	Common areas

A	Ceiling to lift lobbies and corridors; 2400 AFFL;
	MF ceiling system with one layer 13mm plaster
	board; tape & joint fonish; 10mm shadowline;
	painted with one mist coat & two finish coats vinyl
	matt emulsion inc all beads,sealants and cut outs
	for services	1,184	m2	67.00	79,352.12

B	E/O plasterboard ceiling; recessed architectural
	coffer; 2550 AFFL; 1200x1200	58	no	220.00	12,760.00

C	E/O plaserboard ceiling; recessed grid ceiling;
	2475 AFFL; Rockfon or equal approved; 24mm
	exposed grid with 600x600x15 mineral fibre tile;
	inc plywood pattressess and cut outd for services	131	m2	198.00	25,938.00

D	Ceiling to service lift lobbies; 2400 AFFL; MF
	ceiling system with one layer 13mm plasterboard
	tape & joint finish;10mm shadowline; painted with
	one mist coat & finish coats vinyl matt emulsion;
	inc all beads, sealants and cut outd for services	91	m2	67.00	6,097.00

E	Ceiling to garbage rooms; 2400 AFFL; MF ceiling
	system with one layer 13mm plasterboard tape
	& joint finish;10mm shadowline; painted with one
	mist coat & finish coats vinyl matt emulsion;inc
	all beads, sealants and cut outd for services	83.92	m2	67.00	5,622.64

F	Proprietary access panel; 600x600; non-fire rated	11	no	306.00	3,366.00

G	Temporary access panels for commissioning	124	no	40.00	4,960.00

					138,095.76

	CEILING FINISHES
	LEVEL 14-28 (PROVISIONAL)

	Apartments

A	Ceiling to living/bed room (C1); 2800 AFFL;
	MF ceiling system with one layer 13mm
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two inish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	6,927	m2	79.00	547,263.42

B	Ceiling to kitchen/entry/WC (C1); 2400 AFFL;
	MF ceiling system with one layer 13mm
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two inish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	2,697	m2	107.00	288,534.49

C	Ceiling to bathrooms (C1); 2400 AFFL;
	MF ceiling system with one layer 13mm
	moisture resistant plasterboard;glasswool
	insulation 14Kg/m3; tape & joint finish; 10mm
	shadowline; painted with one mist coat & two
	finish coats vinyl matt emulsion; including all
	beads, sealants and cut outs for services	744	m2	113.00	84,122.85

D	Ceiling to kitchen/entry (C2); 2400 AFFL; MF
	ceiling system with two layer 13mm fire rated
	plasterboard;glasswool insulation 14Kg/m3;
	tape & joint finish; 10mm shadowline; painted
	with one mist coat & two finish coats vinyl matt
	emulsion; including all beads, sealants and cut
	outs for services	1,880	m2	148.00	278,261.46

E	Bulkhead (B1); 400mm; MF ceiling system with
	one layer 13mm plasterboard;glasswool insulation
	14Kg/m3; tape & joint finish; painted with one mist
	coat & two finish coats vinyl matt emulsion; including
	all beads,sealants and cut outs for services	398.11	m	68.00	27,071.48

F	Bulkhead (B2); 400mm; MF ceiling system with
	two layer 13mm plasterboard;glasswool insulation
	14Kg/m3; tape & joint finish; painted with one mist
	coat & two finish coats vinyl matt emulsion; including
	all beads,sealants and cut outs for services	483.448	m	93.00	44,960.66
	CEILING FINISHES

	LEVEL 14-28 (PROVISIONAL)

	Apartments

A	Ceiling to kitchen/entry/WC (C5); 2400 AFFL;
	fixed within plasterboard ceiling; 24mm exposed
	grid with 600x600 vinyl faced plasterboard tile;
	cliped in grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services	841	m2	86.00	72,353.52

B	Ceiling to laundry (C5); 2400 AFFL;24mm exposed
	grid with 600x600 vinyl faced plasterboard tile;
	cliped into grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services		m2	86.00	-

C	Ceiling to bathrooms (C6); 2400 AFFL; fixed
	within plasterboard ceiling; 24mm exposed
	grid with 600x600 vinyl faced moisture resistant
	plasterboard tile PVC face to back of tile; cliped
	into grid; 12.5mm thick; min density 8.5Kg/m2
	Boral or equal approved; glasswool insulation
	14Kg/m3;inc plywood pattresses and cut outs for
	services	735	m2	86.00	63,182.48

D	Pelmet; 18mm MDF; 3 sided; 490 girth; fixed on
	timber batten fixed to concrete soffit; void to soffit
	filled with insulation; painted with one mist coat
	& two finish coats vinyl matt emulsion; inc sealants	1,755	m	107.00	187,777.51

E	Pelmet; 18mm MDF; 3 sided; 920 girth; fixed on
	timber batten fixed to concrete soffit; void to soffit
	filled with insulation; painted with one mist coat &
	two finish coats vinyl matt emulsion; inc sealants		m	107.00	-

F	Proprietary access panel; 600x600; non-fire rated	75	no	306.00	22,950.00
G	Temporary access panels for commissioning	146	no	40.00	5,840.00
H	E/O seismic joint; as drwg SK-4500-07	62.79	m	338.00	21,223.02

Blockwork rates

2009-07-20T23:16:00.000-07:00

The rates here are base in UAE dirhams and as per my experience third fixing are very costly so you have to add additional ... and try not to include in your contracts the chasing becaused you wiil have to comeback to a certain level just to make the chasing due to electrical design layout were not ready so..give this to MEP contractors anyway they will be the one to insert the water line and electrical line..ok and note if the comback work were due for almost 2 months try to specify that you will will have a daywork charges because your tools and materials were already set up to a different level and you need to mobilize the tools and materials going back to the same area.

BASEMENT & PODIUM
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05 m²
Walls; 150mm thick m² 95.00
Walls; 200mm thick m² 106.00
Walls; 200mm thick; curved m² 106.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 150mm thick m² 114.00
Walls; 200mm thick m² 123.00

SUNDRIES
Expansion joints or the like m
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 28.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 33.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 29.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; curved m 30.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 35.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 150 x 190mm; 1Nr T12 bar m 115.00
Lintels; 200 x 190mm; 2Nr T12 bar m 115.00
Lintels; 200 x 190mm; 4Nr T16 bar m 115.00
100 x 100 x 150 long x 6mm thick (HEAD RESTRAIN) No 36.00
SLIDING TIES AT 800 MM C/C (ST-200) -
BASEMENT & PODIUM
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 89.00
Walls; 100mm thick fire rated m² 107.00
Walls; 100mm thick curve 93.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 250mm thick m² 139.00
Walls; 350mm thick m² 223.00
Walls; 300mm thick m² 204.00
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405- 2 HOUR FIRE RATED m 32.00
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 26.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 36.00
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 36.00
25 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 36.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 100mm; 2Nr T16 bar m 75.00
Lintels; 100 x 190mm; 4Nr T16 bar m 115.00
Lintels; 150 x 100mm; 2Nr T16 bar m 75.00
Lintels;150 x 190mm; 4Nr T16 bar m 115.00
Lintels; 200 x 100mm; 2Nr T16 bar m 98.00

TOWER A
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 89.00
Walls; 200mm thick m² 106.00
Walls; 200mm thick; curved m² 106.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 105.00
Walls; 150mm thick m² 114.00
Walls; 200mm thick m² 123.00
Walls; 250mm thick -
Walls; 300mm thick 194.00
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 26.00
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405;2 hour fire rated m 32.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 33.00
SUNDRIES (CONT'D)
Expansion joints or the like (Cont'd)
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 29.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; curved m 30.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405: 2 hour fire rated m 35.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405: 2 hour fire rated m -
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 37.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 190mm; 1Nr T12 bar m
Lintels; 100 x 190mm; 1Nr T16 bar m
Lintels; 100 x 190mm; 2Nr T16 bar m
Lintels; 100 x 390mm; 1Nr T16 bar m
Lintels;150 x 190mm; 1Nr T12 bar m
Lintels; 150 x 190mm; 2Nr T12 bar m
Lintels; 150 x 190mm; 4Nr T16 bar m 105.00
Lintels; 200 x 190mm; 2Nr T12 bar m
Lintels; 200 x 190mm; 2Nr T16 bar m
Lintels; 200 x 190mm; 4Nr T16 bar m
Galvanised steel blockwork wall head restraint angles
100 x 100 x 150 long x 6mm thick No 36.00
SLIDING TIES AT 800 MM C/C (ST-200) No -
TOWER 'A'
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05 m
Walls; 150mm thick m 96.00
Walls; 250mm thick m 122.00
Walls; 350mm thick m 179.00
Expansion joints or the like m
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 28.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 30.00
25 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 39.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 100mm; 2Nr T16 bar m 75.00
Lintels; 100 x 190mm; 4Nr T16 bar m 115.00
Lintels; 150 x 100mm; 2Nr T16 bar m 75.00
Lintels; 200 x 100mm; 2Nr T16 bar m 98.00
Lintels; 200 x 190mm; 4Nr T16 bar m 115.00

TOWER 'B'
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 89.00
Walls; 100mm thick; curved m² -
Walls; 150mm thick m² 96.00
Walls; 200mm thick m² 106.00
Walls; 200mm thick; curved m² 109.00
Walls; 250mm thick m² 122.00
Walls; 300mm thick m² 135.00
Walls; 300mm thick; curved m² 179.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 107.00
Walls; 150mm thick m² 114.00
Walls; 200mm thick m² 123.00
Walls; 400mm thick m² 223.00
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 26.00
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; curved m 28.00
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 32.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 28.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 33.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 29.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; curved m 30.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 35.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 30.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 32.00
25 wide joint to 400mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 39.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 190mm; 1Nr T12 bar m
Lintels; 100 x 190mm; 1Nr T16 bar m
Lintels; 100 x 190mm; 2Nr T16 bar m
Lintels;150 x 190mm; 1Nr T12 bar m
Lintels; 150 x 190mm; 2Nr T12 bar m
Lintels; 150 x 190mm; 4Nr T16 bar m 105.00
Lintels; 200 x 190mm; 2Nr T12 bar m
Lintels; 200 x 190mm; 2Nr T16 bar m
Lintels; 200 x 190mm; 4Nr T16 bar m 115.00
Lintels; 250 x 190mm; 2Nr T12 bar m
Galvanised steel blockwork wall head restraint angles
100 x 100 x 150 long x 6mm thick No 36.00
SLIDING TIES AT 800 MM C/C (ST-200) -
TOWER 'B'
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 300mm thick m 204.00
Walls; 350mm thick m 223.00
Walls; 250mm thick m 139.00
Expansion joints or the like m
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 37.00
26 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 39.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 30.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 100mm; 2Nr T16 bar m 75.00
Lintels; 100 x 190mm; 4Nr T16 bar m 115.00
Lintels; 150 x 100mm; 2Nr T16 bar m 75.00
Lintels; 150 x 190mm; 4Nr T16 bar m -
Lintels; 200 x 100mm; 2Nr T16 bar m 98.00

TOWER 'C'
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 89.00
Walls; 200mm thick m² 106.00
Walls; 200mm thick; curved m² 109.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 107.00
Walls; 150mm thick m² 114.00
Walls; 200mm thick m² 123.00
Walls; 250mm thick m² -
Walls; 300mm thick m² 204.00
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 26.00
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 32.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 33.00
SUNDRIES (CONT'D)
Expansion joints or the like (Cont'd)
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 29.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; curved m 30.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 35.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 36.00
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 37.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 190mm; 1Nr T12 bar m
Lintels; 100 x 190mm; 1Nr T16 bar m
Lintels; 100 x 190mm; 2Nr T16 bar m
Lintels;100 x 390mm; 1Nr T16 bar m
Lintels; 150 x 190mm; 1Nr T12 bar m
Lintels; 150 x 190mm; 2Nr T12 bar m
Lintels; 150 x 190mm; 4Nr T16 bar m 105.00
Lintels; 200 x 190mm; 2Nr T12 bar m
Lintels; 200 x 190mm; 2Nr T16 bar m
Lintels; 200 x 190mm; 4Nr T16 bar m 115.00
Lintels; 300 x 190mm; 2Nr T16 bar m
Galvanised steel blockwork wall head restraint angles
100 x 100 x 150 long x 6mm thick No 36.00
SLIDING TIES AT 800 MM C/C (ST-200) -
TOWER 'C'
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05 No
Walls; 150mm thick m² 96.00
Walls; 250mm thick m² 122.00
Walls; 350mm thick m² 179.00
Expansion joints or the like
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 28.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 32.00
28 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 39.00
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m -
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 100mm; 2Nr T16 bar m 75.00
Lintels; 100 x 190mm; 4Nr T16 bar m 115.00
Lintels; 150 x 100mm; 2Nr T16 bar m 75.00

WALLS AND PIERS-PODIUM APARTMENTS
WALLS AND PIERS
Concrete blockwork; as Specification 04200-2.1.1 (non fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick m² 89.00
Walls; 150mm thick m² 96.00
Walls; 200mm thick m² 106.00
Walls; 250mm thick m² 122.00
Walls; 300mm thick m² 135.00
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 150mm thick m² 114.00
Walls; 200mm thick m² 123.00
Cavity walls; comprising 200 thick outer skin, 200 inner skin; 100mm wide cavity m²
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 26.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 28.00
25 wide joint to 150mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 33.00
SUNDRIES (CONT'D)
Expansion joints or the like (Cont'd)
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 29.00
25 wide joint to 200mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 35.00
25 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 30.00
25 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405 m 32.00
25 wide joint to 500mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 42.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 190mm; 1Nr T12 bar m
Lintels; 150 x 190mm; 1Nr T12 bar m
Lintels;150 x 190mm; 4Nr T16 bar m 105.00
Lintels; 200 x 190mm; 2Nr T12 bar m
Lintels; 200 x 190mm; 4Nr T12 bar m
Lintels; 250 x 190mm; 2Nr T12 bar m
Lintels; 300 x 190mm; 3Nr T12 bar m
Galvanised steel blockwork wall head restraint angles
100 x 100 x 150 long x 6mm thick No 36.00
SLIDING TIES AT 800 MM C/C (ST-200) -
PODIUM APARTMENTS
Concrete blockwork; as Specification 04200-2.1.2 (fire rated construction); reinforced as drawing S0-M-05
Walls; 100mm thick fire rated m² 107.00
Walls; 250mm thick m² 139.00
Walls; 300mm thick m² 204.00
Walls; 350mm thick m² 223.00
Concrete blockwork; as Specification 04200-2.1.2 (non fire rated construction); reinforced as drawing S0-M-04
Walls; 350mm thick m² 179.00
SUNDRIES
Expansion joints or the like
25 wide joint to 100mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 32.00
26 wide joint to 250mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 36.00
26 wide joint to 300mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 hour fire rated m 37.00
25 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; 2 2 hour fire rated m 39.00
25 wide joint to 350mm thick wall; insulation filler, sealant pointed both sides; as Drawing INT-405; m 39.00
Precast concrete lintel blocks, including in-situ infill concrete; as Specification 04200-3.4
Lintels; 100 x 100mm; 2Nr T16 bar m 75.00
Lintels; 100 x 190mm; 4Nr T16 bar m 115.00
Lintels; 150 x 100mm; 2Nr T16 bar m 75.00
Lintels; 200 x 100mm; 2Nr T16 bar m 98.00
Lintels; 200 x 190mm; 4Nr T16 bar m 115.00
Lintels; 250 x 100mm; 2Nr T16 bar m 115.00

Extra Over for Fair Faced Blockwork m² 32.00
Extra Over for Fair Faced Blockwork inside the mechanical shaft as per AFC Project Manager instruction m2 32.00
ADDITIONAL FAIRFACE WORKS IN MAY m2 32.00

Extra Over for Pointing Works m² 22.00

Vertical Control Joints m 24.00

200MM THERMAL BLOCK WORK TOWER B m² 386.00