All about Software Testing

ISTQB Sample Paper - 1

2010-07-31T11:16:00.000-07:00

ISTQB Sample Paper - 1

1.      An input field takes the year of birth between 1900 and 2004

     The boundary values for testing this field are

a.     0,1900,2004,2005

b.     1900, 2004

c.     1899,1900,2004,2005

d.     1899, 1900, 1901,2003,2004,2005

Which one of the following are non-functional testing methods?

System testing

Usability testing

Performance testing

Both b & c

Which of the following tools would be involved in the automation of regression test?

Data tester

Boundary tester

Capture/Playback

Output comparator.

Incorrect form of Logic coverage is:

Statement Coverage

Pole Coverage

Condition Coverage

Path Coverage

Which of the following is not a quality characteristic listed in ISO 9126 Standard?

Functionality

Usability

Supportability

Maintainability

To test a function, the programmer has to write a _________, which calls the function to be tested and passes it test data.

Stub

Driver

Proxy

None of the above

Boundary value testing

a. Is the same as equivalence partitioning tests

b. Test boundary conditions on, below and above the edges of input and output equivalence classes

c. Tests combinations of input circumstances

d. Is used in white box testing strategy

Pick the best definition of quality

a. Quality is job one

b. Zero defects

c. Conformance to requirements

d. Work as designed

Fault Masking is

a. Error condition hiding another error condition

b. Creating a test case which does not reveal a fault

c. Masking a fault by developer

d. Masking a fault by a tester

One Key reason why developers have difficulty testing their own work is :

Lack of technical documentation

Lack of test tools on the market for developers

Lack of training

Lack of Objectivity

11.  During the software development process, at what point can the test process start?

a.     When the code is complete.

b.     When the design is complete.

c.     When the software requirements have been approved.

When the first code module is ready for unit testing

In a review meeting a moderator is a person who

a. Takes minutes of the meeting

b. Mediates between people

c. Takes telephone calls

d. Writes the documents to be reviewed

Given the Following program

IF X < Y

THEN Statement 1;

ELSE IF Y >= Z

THEN Statement 2;

END

McCabe’s Cyclomatic Complexity is :

a. 2

b. 3

c. 4

d. 5

How many test cases are necessary to cover all the possible sequences of statements (paths) for the following program fragment? Assume that the two conditions are independent of each other : -

…………

if (Condition 1)

then statement 1

else statement 2

if (Condition 2)

then statement 3

…………

a. Test Cases

b. 3 Test Cases

c. 4 Test Cases

d. Not achievable

15. Acceptance test cases are based on what?

a. Requirements

b. Design

c. Code

d. Decision table

16. “How much testing is enough?”

a. This question is impossible to answer

b. This question is easy to answer

c. The answer depends on the risk for your industry, contract and special requirements

d. This answer depends on the maturity of your developers

17. A common test technique during component test is

a. Statement and branch testing

b. Usability testing

c. Security testing

d. Performance testing

18. Statement Coverage will not check for the following.

a. Missing Statements

b. Unused Branches

c. Dead Code

d. Unused Statement

19. Independent Verification & Validation is

a. Done by the Developer

b. Done by the Test Engineers

c. Done By Management

d. Done by an Entity Outside the Project’s sphere of influence

20. Code Coverage is used as a measure of what ?

a. Defects

b. Trends analysis

c. Test Effectiveness

d. Time Spent Testing

Answer: Answers-of-ISTQB-Sample-Paper - 1

Answers of ISTQP Sample Paper 1

2010-07-31T11:12:00.001-07:00

Answers of ISTQP Sample Paper 1

1 c

2 d

3 c

4 b

5 c

6 b

7 b

8 c

9 a

10 d

11 c

12 b

13 b

14 c
15 a

16 c

17 a

18 a

19 d

20 c

QTP Certification Practice Questions

2010-05-10T10:41:00.000-07:00

QTP Certification Practice Questions

QTP–SET 1	QTP–SET 2	QTP–SET 3	QTP–SET 4
QTP–SET 5	QTP–SET 6	QTP–SET 7	QTP–SET 8
QTP–SET 9	QTP–SET 10

QTP Certification Practice Questions - Set 1

2010-05-09T11:05:00.000-07:00

QTP Certification Practice Questions - Set 1

1) 'Browser navigation timeout' is in which tab of Test Settings

(File->Settings) window.
A) Properties
B) Resources
C) Web
D) Web Settings
2) How many tabs are there in Test Settings (File->Settings) window
A) 7
B) 6
C) 5
D) 8
3) Identify the tabs in the Test Settings (File->Settings) window
A) Properties, Run, Resources, Parameters, Environment, Web, Recovery
B) Properties, Run, Resources, Parameters, Environment, Web
Settings,Recovery
C) Properties, Run Options, Resources, Parameters, Environment, Web,
Recovery
D) Properties, Run, Resources, Input Parameters, Environment, Web, Recovery
4) 'Generate Script' is in which tab of Test Settings (File->Settings)
window
A) Properties
B) Web
C) Resources
D) Recovery
5) The following are the four main columns in the Keyword view
A) Item, Operation, Value, Comments
B) Item, Operation, Value, Documentation
C) Item, Operation, Property, Documentation
D) Number, Operation, Value, Documentation
6) For each object and method in an Expert View statement, a
corresponding row exists in the Keyword View.
A) True
B) False
C) There is a problem with the statement.
D) None of above
7) You can work on one or several function libraries at the same time.
A) True
B) False
8) You can insert additional steps on the test objects captured in the
Active screen after the recording session.
A) True
B) False
9) The Active Screen enables you to parameterize object values and
insert checkpoints
A) True
B) False
10) A QTP user can increase or decrease the active screen information
saved with the test.
A) True
B) False

Answers: QTP Certification Practice Questions - Set 1

2010-05-09T11:04:00.000-07:00

Answers: QTP Certification Practice Questions - Set 1

1) C, 2) A, 3) A, 4) A, 5) b, 6) A, 7) A, 8) A, 9) A, 10) A

QTP Certification Practice Questions - Set 2

2010-05-09T11:00:00.000-07:00

QTP Certification Practice Questions - Set 2

11) The Information pane provides a list of............. in the test:
A) Semantic errors
B) Syntax errors
C) Common errors
D) Logic errors

12) When we switch from Expert view to the Keyword view, QTP
automatically checks for syntax errors in the test and shows them in the
information pane.
A) True
B) False

13) If the information pane is not open, QTP automatically opens it in
case a syntax error is detected.
A) True
B) False

14) ..................... provides a list of the resources that are
specified in your test but cannot be found.
A) Missing pane
B) Missing Resources pane
C) Resources pane
D) Missing Items pane

15) Whenever you open a test or a function library, QTP automatically
checks for the availability of specified resources.
A) True
B) False

16) The Data Table does not assists you in parameterizing your test.
A) True
B) False

17) Tabs in the Debug Viewer pane are:
A) Watch, Variables, Debug
B) Watch, Data, Command
C) Watch, Variables, Command
D) View, Variables, Command

18) ............... tab enables you to view the current value of any
variable or VBScript expression.
A) Watch
B) VIew
C) Locate
D) Current

19) The .... tab displays the current value of all variables that have
been recognized up to the last step performed in the run session.
A) View
B)Variables
C) Locate
D) Current

20) The .........tab enables you to run a line of script to set or
modify the current value of a variable or VBScript object in your test
or function library.
A) View
B) Variables
C) Command
D) Current

============================
Answer of All Above Questions

=======================

Answers: QTP Certification Practice Questions - Set 2

2010-05-09T10:58:00.000-07:00

Answers: QTP Certification Practice Questions - Set 2

11) B, 12) A, 13) A, 14) B, 15) A, 16) B, 17) C, 18) A, 19) B, 20) C

QTP Certification Practice Questions - Set 3

2010-05-09T10:56:00.002-07:00

QTP Certification Practice Questions - Set 3

21) Panes in QTP can have one of the following states—docked or floating.

A) True
B) False

22) Which of the following statement is True:
A) QuickTest enables you to open and work on one test at a time
B) QuickTest enables you to open and work on two tests at a time
C) QuickTest enables you to open and work on predefined number of tests
at a time
D) QuickTest enables you to open and work on nine test at a time

23) Which of the following statement is True:
A) You can open and work on two function libraries simultaneously
B) You can open and work on multiple function libraries simultaneously
C) You can open and work on nine function libraries simultaneously
D) You can open and work on one function library at a time

24) You can open any function library, regardless of whether it is
associated with the currently open test.
A) True
B) False

25) You can work with multiple documents (test, component, or
application area, function libraries) using the...... dialog box
A) Panes
B) Display
C) Show
D) Windows

26) QuickTest has ..... built-in toolbars.
A) 5
B) 6
C) 7
D) 8

27) The ......... toolbar contains buttons for recording and running
your test.
A) Standard
B) Tools
C) Automation
D) Edit

28) Shortcut Key for opening a new Function Library is:
A) Shift+Alt+N
B) Ctrl+Alt+N
C) Shift+N
D) CRTL+N

29) Shortcut Key for Closing all open Function Libraries in one go.
A) Ctrl+Alt+C
B) Shift+A+C
B)Shift+N
D) None of these

30) shortcut Key for Commenting out the current row, or selected rows
A) Shift+M
B) Ctrl+C
C) Ctrl+M
D) Shift+C

Answers: QTP Certification Practice Questions - Set 2

2010-05-09T10:56:00.000-07:00

Answers: QTP Certification Practice Questions - Set 2

11) B, 12) A, 13) A, 14) B, 15) A, 16) B, 17) C, 18) A, 19) B, 20) C

QTP Certification Practice Questions - Set 3

2010-05-09T10:54:00.001-07:00

QTP Certification Practice Questions - Set 3

21) Panes in QTP can have one of the following states—docked or floating.
A) True
B) False

22) Which of the following statement is True:
A) QuickTest enables you to open and work on one test at a time
B) QuickTest enables you to open and work on two tests at a time
C) QuickTest enables you to open and work on predefined number of tests
at a time
D) QuickTest enables you to open and work on nine test at a time

23) Which of the following statement is True:
A) You can open and work on two function libraries simultaneously
B) You can open and work on multiple function libraries simultaneously
C) You can open and work on nine function libraries simultaneously
D) You can open and work on one function library at a time

24) You can open any function library, regardless of whether it is
associated with the currently open test.
A) True
B) False

25) You can work with multiple documents (test, component, or
application area, function libraries) using the...... dialog box
A) Panes
B) Display
C) Show
D) Windows

26) QuickTest has ..... built-in toolbars.
A) 5
B) 6
C) 7
D) 8

27) The ......... toolbar contains buttons for recording and running
your test.
A) Standard
B) Tools
C) Automation
D) Edit

28) Shortcut Key for opening a new Function Library is:
A) Shift+Alt+N
B) Ctrl+Alt+N
C) Shift+N
D) CRTL+N

29) Shortcut Key for Closing all open Function Libraries in one go.
A) Ctrl+Alt+C
B) Shift+A+C
B)Shift+N
D) None of these

30) shortcut Key for Commenting out the current row, or selected rows
A) Shift+M
B) Ctrl+C
C) Ctrl+M
D) Shift+C

Answers: QTP Certification Practice Questions - Set 3

2010-05-09T10:53:00.001-07:00

Answers: QTP Certification Practice Questions - Set 3

21) A, 22) A, 23) B, 24) A, 25) D, 26) D, 27) C, 28) A, 29) D, 30) C

QTP Certification Practice Questions - Set 4

2010-05-09T09:30:00.000-07:00

QTP Certification Practice Questions - Set 4

31) You can manage the test actions and the test or function library
steps using the ... menu commands
A) File
B) Edit
C) Automation
D) Tools

32) To expand all the steps in the keyword view which option you would
use from the View menu.
A) Expand
B) Expand All
C) Expand Items
D) Expand Rows

33) What is the shortcut key to open a Step Generator.
A) F2
B) F5
C) F6
D) F7

34) Function Definition Generator in found in which menu option.
A) File
B) Tools
C) Insert
D) View

35) The shortcut keys for Record, Stop and Run respectively are
A) F3, F4, F5
B) F4, F3, F5
C) F4, F5, F3
D) F3, F5, F4

36) What is the shortcut key for opening an Object Repository.
A) Alt+R
B) Shift+R
C) Ctrl+R
D) Shift+O+R

37) Shortcut key to Insert/Remove a breakpoint is
A) F9
B) F8
C) Ctrl+b
D) Shift+b

38) .........runs only the current line of the script. If the current
line calls a method, the method is displayed in the view but is not
performed.
A) Step Over
B) Step Out
C) Step Into
D) Step Till

39) .........runs only the current line of the script. When the current
line calls a method, the method is performed in its entirety, but is not
displayed in the view.
A) Step Over
B) Step Out
C) Step Into
D) Step Till

40) What is the shortcut key to Clear all Breakpoints
A) Ctrl+Shift+F9
B) Shift+Ctrl+F9
C) Alt+Shift+F9
D) Alt+Ctrl+F9

Answers: QTP Certification Practice Questions - Set 4

2010-05-09T09:28:00.001-07:00

Answers: QTP Certification Practice Questions - Set 4

31) B, 32) B, 33) D, 34) C, 35) A, 36) C, 37) A, 38) C, 39) A, 40) A

QTP Certification Practice Questions - Set 5

2010-05-09T09:27:00.001-07:00

QTP Certification Practice Questions - Set 5

41) Object Spy can be found in ........menu.

A) Tool
B) Tools
C) Task
D) Tasks

42) ............ displays the open documents side-by-side.
A) Tile Vertically
B) Tile Horizontally
C) Cascade
D) Tile Cascade

43) For opening the QuickTest Professional Help we can use.......
A) F3
B) F5
C) F1
D) F2

44) If QTP cannot find any object that matches the description, or if it
finds more than one object that matches, QuickTest may use
the............mechanism to identify the object.
A) Ordinal Identifier
B) Index Identifier
C) Smart Identification
D) Assistive Identification

45) You can configure the ........, ............ and ............
properties that QuickTest uses to record descriptions of the objects in
your application
A) mandatory, assistive, and ordinal identifier
B) mandatory, required, and ordinal identifier
C) smart, assistive, and ordinal identifier
D) Index, assistive, and ordinal identifier

46) The .......... property set for each test object is created and
maintained by QuickTest.
A) Run-Time Object
B) Test Object
C) Smart Identification Object
D) Assistive Object

47) You can access and perform ......... methods using the Object property.
A) Run-Time Object
B) Test Object
C) Smart Identification Object
D) Assistive Object

48) You can view or modify the test object property values that are
stored with your test in the .........
A) Information Pane
B) Data Table
C) Information Pane & Data Table Both
D) Object Properties & Object Repository dialog box.

49) You can retrieve or modify property values of the test object during
the run session by adding ..........statements in the Keyword View or
Expert View.
A) GetROProperty & SetROProperty
B) GetTOProperty & SetTOProperty
C) GetTOProperty & SetROProperty
D) GetROProperty & SetTOProperty

50) If the available test object methods or properties for an object do
not provide the functionality you need, you can access ..............of
any run-time object using the Object property.
A) The internal methods and properties
B) The mandatory methods and properties
C) The selective methods and properties
D) The assistive methods and properties

Answers: QTP Certification Practice Questions - Set 5

2010-05-09T09:25:00.001-07:00

Answers: QTP Certification Practice Questions - Set 5

41) B, 42) A, 43) C, 44) C, 45) A, 46) B, 47) A, 48) D, 49) B, 50) A

QTP Certification Practice Questions - Set 6

2010-05-09T09:24:00.000-07:00

QTP Certification Practice Questions - Set 6

51) Using the Object Spy, you can view
A) the run-time or test object properties and methods of any object in
an open application.
B) the run-time or test object properties of any object in an open
application.
C) the test object properties and methods of any object in an open
application.
D) the run-time object properties and methods of any object in an open
application.

52) There are .........object type filters in Object spy dialog box.
A) Two
B)Three
C) Four
D) Five

53) In the Object Spy window, in the Properties Tab
A) Copying of Properties and its values is possible with CTRL+C
B) Copying of Properties and its values is possible by right clicking on
it and choosing copy.
C) Copying of Properties and its values is possible with both A) and B)
methods
D) Copying of Properties and its values is possible is not possible

54) In the Object Spy window, in the methods Tab
A) Copying of Methods is possible with CTRL+C
B) Copying of Methods is possible by right clicking on it and choosing copy.
C) Copying of Methods is possible with both A) and B) methods
D) Copying of Methods is possible is not possible

55) Object Spy dialog box
A) Can be resized
B) Cannot be resized

56) .............. are the highest level of the test hierarchy in the
Keyword view.
A) Tests
B) Steps
C) Call to Actions
D) Actions

57) You can copy and paste or drag and drop actions to move them to a
different location within a test
A) True
B) False

58) You can print the contents of the Keyword View to your Windows
default printer (and even preview the contents prior to printing).
A) True
B) False

59) In the Keyword View, you can also view properties for items such as
checkpoints.
A) True
B) False

60) In the step Browser > Page > Edit > Set "Sachin", identify container
object(s)
A) Browser
B) Edit
C) Page
D) Both Browser & Page

Answers: QTP Certification Practice Questions - Set 6

2010-05-09T09:22:00.001-07:00

Answers: QTP Certification Practice Questions - Set 6

51) A, 52) A, 53) A, 54) A, 55) A, 56) D, 57) A, 58) A, 59) A, 60) D

QTP Certification Practice Questions - Set 7

2010-05-09T09:20:00.000-07:00

QTP Certification Practice Questions - Set 7

61) You can use the Keyword View to add a step ..........in your test.

A) at the end
B) below the currently selected step
C) at the beginning
D) at anypoint

62) The Documentation cell is .............

A) Read-only
B) Write-only
C) Read and Write
D) Read, write & execute

63) An Item column can be any of the following:

A) A test object
B) A statement like Dim
C) A step generated by step generator
D) All of above

64) The Operation cell in the keyword view specifies the operation to be
performed on the item listed in the ........... column.

A) Operation
B) Documentation
C) Item
D) Value

65) Even if the Item column in the Keyword View is displayed to the
right of the Operation column, you must still first select an item to
view the list of available operations in the Operation column.

A) True
B) False

66) The Value cell in the keyword view can contain........ value

A) Constant
B) Parameter
C) Both A) & B)
D) None of these

67)The ............... enables you to encode your passwords and place
secure values into the Data Table.

A) Password Encoder
B) Password Decoder
C) Password Encode
D) Password Decode

68) You can also encrypt strings in Data Table cells using the .........
option in the Data Table menu.

A) Decrypt
B) Encrypt
C) Encrypt Code
D) Decrypt Code

69) In addition to adding standard statement steps to your test using
the Keyword View, you can also insert

A) Checkpoint step
B) Output value step
C) Comment step
D) All of above

70) The correct syntax of the condition a statement starting with Do is.....

A) Do...While
B) Do...Until
C) Do...Next
D) Both A) and B)

Answers: QTP Certification Practice Questions - Set 7

2010-05-09T09:19:00.000-07:00

Answers: QTP Certification Practice Questions - Set 7

61) D, 62) A, 63) D, 64) C, 65) A, 66) C, 67) A, 68) B, 69) D, 70) D

QTP Certification Practice Questions - Set 8

2010-05-09T08:57:00.000-07:00

QTP Certification Practice Questions - Set 8

71) QuickTest processes a comments when it runs a test.

A) True
B) False

72) Press ..... to add a new step below the currently selected step.
A) F8
B) Shift + A
C) F0
D) Shift + A + Q

73) While working with the Keyword View, you can ...... steps to move
them to a different location in a test or in an action
A) Copy and Paste
B) Cut and Paste
C) Drag and drop
D) Both A) and C)

74) You can specify the order in which the columns are displayed in the
Keyword view.
A) True
B) False

75) You can view ....... while working with keyword view.
A) object properties
B) action properties
C) action call properties
D) checkpoint properties
E) Output value properties
F) None of the above
G) All of above

76) You cannot manage some aspects of a local object repository using
the QuickTest Object Repository automation object model..
A) True
B) False

77) For each action, you can use a combination of objects from your
local and shared object repositories.
A) True
B) False

78) QuickTest adds all new objects to the local object repository even
if one or more shared object repositories are already associated with
the action assuming that an object with the same description does not
already exist in one of the associated shared object repositories..
A) True
B) False

79) If a child object is added to a local object repository, and its
parents are in a shared object repository, then you have to manually
drag and drop its parent objects from shared object repository to local
object repository.
A) True
B) False

80) The ....... is not accessible as a separate file
A) local object repository
B) shared object repository
C) Both
D) None

Answers: QTP Certification Practice Questions - Set 8

2010-05-09T08:54:00.001-07:00

Answers: QTP Certification Practice Questions - Set 8

71) B, 72) A, 73) D, 74) A, 75) G, 76) B, 77) A, 78) A, 79) B, 80) A

QTP Certification Practice Questions - Set 9

2010-05-09T08:50:00.000-07:00

QTP Certification Practice Questions - Set 9

81) In the Object Repository window:.
A) Local objects are editable (black)
B) Shared objects are in read-only format (gray)
C) Local objects are in read-only format (gray)
D) Shared objects are editable (black)

82) Mark true statement(s):.
A) You can delete objects from a shared object repository using the Object Repository window.
B) You can delete objects from the local object repository using the Object Repository Manager
C) You can delete objects from the local object repository using the Object Repository window
D) You can delete objects from a shared object repository using the Object Repository Manager

83) You can modify an object stored in a shared object repository.
A) using the Object Repository Manager
B) using the Object Repository window
C) you can copy it to the local object repository and then modify its properties
D) you cannot modify properties of objects stored in Shared object repository

84) If an object is contained in both local and shared repositories then, during a run session.
A) QuickTest will use the object in the local object repository
B) QuickTest will use the object in the Shared object repository
C) There will be a conflict
D) QuickTest will use Descriptive Programming

85) When you copy an object to the local object repository
A) its parent objects are also copied to the local object repository
B) its parent objects are not copied to the local object repository
C) You have to manually copy its parent objects are also copied to the local object repository
D) You have to manually drag and drop its parent objects

86) For tests, you can also view test object properties and property values for objects in the Active Screen, regardless of whether the objects are
stored in the object repository.
A) True
B) False

87) Object Properties window differs for objects stored in Shared and Local object repository.
A) True
B) False

88) You can rename objects in the shared object repository using the Object Repository Manager
A) True
B) False, you cannot rename objects in shared object repository

89) When you modify the name of an object in the local object repository, the name is automatically updated in ....... for all occurrences of the object..
A) in the Keyword View
B) in the Expert View
C) Both Keyword and Expert View
D) Changing name of an object doest not effect keyword or expert view

90) When you modify the name of an object in a shared repository, the name is automatically updated in all tests open on the same computer that use the object repository as soon as you make the change, even if you have not yet saved the object repository with your changes.
A) True
B) False

Answers: QTP Certification Practice Questions - Set 9

2010-05-09T08:48:00.000-07:00

Answers: QTP Certification Practice Questions - Set 9

81) A,B, 82) C,D, 83) A,C, 84) A, 85) A, 86) A, 87) A, 88) A, 89) C, 90) A

Answers: QTP Certification Practice Questions - Set 9

2010-05-09T08:44:00.001-07:00

Answers: QTP Certification Practice Questions - Set 9

81) A,B, 82) C,D, 83) A,C, 84) A, 85) A, 86) A, 87) A, 88) A, 89) C, 90) A

QTP Certification Practice Questions - Set 10

2010-05-09T08:40:00.001-07:00

QTP Certification Practice Questions - Set 10

91) An ........ assigns a numerical value to a test object that indicates its order or location relative to other objects with an otherwise identical description (objects that have the same values for all properties)

A) Index identifier.

B) ordinal identifier.

C) SMART ID identifier.

D) original identifier.

92) You can add an object to the local object repository only if that object does not already exist in a shared object repository that is associated with the action. If an object already exists in an associated shared object repository, you can add it to the local object repository using the ........ option.

A) Copy from Shared Repository

B) Copy from Shared Object Repository

C) Copy to Local

D) Copy to Local repository

93) You can copy, paste, and move objects in the local object repository using the Object Repository window, and copy, paste, and move objects both within a shared object repository and between shared object repositories using the Object Repository Manager. But you cannot copy objects from a shared object repository to the local object repository to modify them locally

A) True

B) False

94) At the time of copying, pasting and moving objects, you cannot move an object to any of its descendants.

A) True

B) False

95) When you remove a step from your test, its corresponding object is also removed from the object repository

A) True

B) False

96) You can use the Find and Replace dialog box to replace property or object names.

A) True

B) False

97) The Object Repository window is ...... during record and run sessions

A) read-only

B) read-write only

C) read-write and enable

D) None of above

98) In the Associated Repositories tab of the Action Properties dialog box, the ......object repository is always listed first and cannot be moved down the priority list or deleted.

A) local

B) shared

C) Both

D) None

99) In the Associated Repositories tab of the Action Properties dialog box, although we can order the object repositories according to our choice except the fact that Shared Repository remains the first one and cannot be removed.

A) True

B) False

100) If your object repositories are stored in the file system and you want other users or Mercury products to be able to run this action on other computers, you should set the file path as a

A) Absolute path

B) relative path

C) both

D) None of above