Espacio Mixto

Periodic DNS queries for fedoraproject.org

2025-01-09T19:57:00.011-06:00

A while back I decided to install Fedora in my old Laptop Gateway M-6806m and used it to test random things like Grafana, Docker, etc.

In the last weeks pi-hole was installed to test it as a docker container instead of the installation done in my Raspeberry Pi 2 Model B, for that I used instead the Gateway laptop.

So, it was really strange to see "fedoraproject.org" in the pi-hole section "Top Permited Domains"

Ater a fast search with qwant.com found the answer in Reddit with the same question so, I'm keeping a copy of the answer here for my self (and you) 'cause I don't see the point to keep "asking" the DNS sever about that domain name even when I randomly use this laptop.

r/Fedora
1 yr. ago
unconcious_insomnia
Question: How to stop periodic DNS queries for fedoraproject.org

Was just looking at DNS logs while nothing is running. Constant DNS queries for fedoraproject.org without anything running.

Edit: Solved by u/aioeu | rpm-ostree override remove NetworkManager-config-connectivity-fedora or sudo dnf remove NetworkManager-config-connectivity-fedora

$sudo dnf remove NetworkManager-config-connectivity-fedora

Package        Arch       Version           Repository                 Size
Removing:
NetworkManager-config-connectivity-fedora noarch 1:1.50.0-1.fc41 fedora     310.0 B

Transaction Summary:
Removing:           1 package

Is this ok [y/N]: y
Running transaction
[1/2] Prepare transaction                   100% |   1.0   B/s |   1.0   B | 00m01s
[2/2] Removing NetworkManager-config-connectivity-fedora-1:1.50.0-1.fc41.noarch                 100% |   0.0   B/s |   3.0   B | 00m15s
Complete!

If you are dealing with deeper system boot issues or filesystem errors, check out my ´How to Fix "e2fsck: Cannot continue, aborting" on GNU/Linux´

¡Santa Claus es un Administrador de Sistemas!

2020-12-21T18:16:00.003-06:00

MobaXterm: How to Fix Multiple Password Prompts when Connecting via SSH (Solaris/Linux)

2020-12-09T14:48:00.001-06:00

If you are a System Administrator, you probably use MobaXterm as your go-to tool for its versatility: integrated X server, SSH client, SFTP file transfer, and more. However, since version 21.1, many users started experiencing a frustrating issue: MobaXterm requests the password three times before allowing access to certain hosts, particularly those running Solaris.

In this article, I’ll explain why this happens and how to fix it permanently by adjusting your SSH configuration.

The Problem: Why does MobaXterm ask for the password repeatedly?

At first, you might think the SSH package was upgraded on the server side or that a system-wide OS upgrade changed the security policies. However, if you test the connection with other clients like Putty.exe, the issue does not occur.

The root cause lies in the Preferred Authentications order. MobaXterm tries several methods that the server might not accept immediately, exhausting the allowed attempts before falling back to the interactive keyboard method.

Step-by-Step Solution: Adjusting the PreferredAuthentications Order

To fix this behavior, we need to force MobaXterm to use keyboard-interactive as the primary option. Follow these steps within your MobaXterm local terminal:

1. Prepare your configuration file

Inside your "Moba home," make sure you have a .bashrc file. If it doesn't exist, create it. We will automate the process to ensure your SSH changes persist:

/bin/cp -p /etc/my_ssh_config /etc/ssh_config

2. Edit the ssh_config file

Locate the file at /etc/ssh_config. Find the line containing the authentication methods, comment it out, and add the corrected version:

# Original line (Commented out):
# PreferredAuthentications hostbased,publickey,password,keyboard-interactive

# New configuration with priority for keyboard-interactive:
PreferredAuthentications keyboard-interactive,hostbased,publickey,password

3. Save changes persistently

Copy your modified SSH config to a backup file so your changes aren't lost when you restart your session:

/bin/cp -p /etc/ssh_config /etc/my_ssh_config

Final Result

After applying these changes, try connecting to your Solaris or Linux host again. You should find that it now connects seamlessly, asking for the password only once—exactly as it should.

MobaXterm Window

Amigo organillero

2020-11-11T18:14:00.002-06:00

Hoy por la tarde, un par de personas estaban recorriendo la zona con un organillo montador sobre un... ¿carrito?, no sabría que descripción darle.

Lo importante es que nos alegraron la tarde con diversas canciones, para salir de la monotonía causada por la pandemia y ellos pudieron recolectar algo de dinero de los vecinos que salieron.

Fall guys first victory

2020-08-29T18:53:00.070-05:00

This was our first victory playing "Fall guys" !

Unsigned application requesting unrestricted access to system.

2020-08-21T23:01:00.027-05:00

This week I had to work with an appliance and had to launch a remote console via ilom but everytime I tried the following window was displayed:

So, I did a search for
"The following resource is signed with a weak signature algorithm MD5 with RSA and is treated as unsigned" and found three links

https://www.blackmoreops.com/2017/06/08/fix-java-error-unsigned-application-requesting-unrestricted-access-to-system/
https://learningintheopen.org/2017/11/03/java-jnlp-error-weak-signature-algorithm-md5withrsa/
and
https://www.cyberciti.biz/datacenter/bmc-ipmi-kvm-java-applets-broken-with-java-security-update/

basically one has to comment out a line containing the words "jdk.jar.disabledAlgorithms"

to the file on a similar path on my system (I'm using Win10 and the latest java version available)

C:\Program Files (x86)\Java\jre1.8.0_261\lib\security\java.security

The line I found is: jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024, DSA keySize < 1024

After I commented out the line and saved the changes (as Administrator, otherwise you can not save the changes to the file) I was able to launch the console but after a few seconds I received a second error message saying:

protocol is disabled or cipher suites are inappropiate java

Another search lead me to

https://talesfromthedatacenter.com/2015/05/ilom-error-no-appropriate-protocol-protocol-is-disabled-or-cipher-suites-are-inappropriate/

explaining that another line on the same file needs to be commented out too containing the words
"jdk.tls.disabledAlgorithms=SSLv3"

On my system again the line suggested looks like this:

jdk.tls.disabledAlgorithms=SSLv3, RC4, DES, MD5withRSA, DH keySize < 1024, \
EC keySize < 224, 3DES_EDE_CBC, anon, NULL

After I commented the lines, launched the console again and worked fine 100%.

The alternative is to download/install older versions of java, there's another page with more details about this:

https://www.java.com/en/configure_crypto.html

For me, is faster to edit/save the file, launch the console, get the work done and revert the changes to the file.

Oracle Certified! Oracle Cloud Infrastructure - Foundations Associate 2020

2020-08-08T20:45:00.017-05:00

So, after some weeks learning about the Oracle Certification "Oracle Cloud Infrastructure - Foundations Associate" I'm officially certified!

Let's see what else I'm going to learn later. :)

New led fans Eagle Warrior

2020-07-19T15:30:00.031-05:00

It was time to make the PC a little more fun and decided to buy a couple of led fans, the brand is "Eagle Warrior" which is a Mexican brand of gamer products.

You can reach them via: www.eaglewarrior.net / https://twitter.com/eaglewarriormx?lang=en

These is the look of the brand:

And how the PC looks now:

So far so good, both working and look great!

Hardware upgrade for Laptop Gateway M-6806m

2020-04-26T15:25:00.020-05:00

I'm doing a hardware upgrade to this old laptop by upgrading the RAM from 2G to 4G, removing the DVD and adding a caddy to store the original hard drive were the DVD was and a new SDD to install the OS instead of the original HDD.

The caddy I gouth is a PATA IDE to SATA, 12.7mm to connect the original HDD, which you can see over the DVD and the SSD already connected and protected by that metal "cage" to the left.

Now, you can see the original RAM installed and the new 4G protected with the envelops they were sent by the provider:

And now, these are the brand new 4G RAM installed:

Now, this is how it looks the caddy taking the place and simulating being the DVD (at the bottom):

The old BIOS detects the new RAM installed:

But I had a problem with the BIOS to put the SSD as the primary boot device and the HDD as secondary, somehow the HDD went to the "bottom" of the options and it was complicate to put it below the SSD.

When I finally got the drives in the boot order as I wanted, there were issues with the RAM while I was doing tests, so I had to use memtest to confirm one of them was defective, I reached the provider who confirmed the memtest results I ran and send the replacement a few days later.

Finally with the new hardware, this is how it looks running:

The laptop came with Windows XP and now it is running Linux Mint, not sure if it will remain installed, maybe I'll reinstall it with Debian, not sure yet but I'm looking to get a graphical environment that does not consume too much resourcers and don't require too much time doing settings.

A couple of links I used to research to find the correct caddy:

http://www.2ndhddcaddy.co.uk/gateway-m-6806m-2nd-hdd-hard-drive-caddy.html

https://www.manualslib.com/manual/432038/Gateway-M-6801mt.html?page=123#manual

AdGuard Home instead of pi-hole with a Raspberry Pi 2 Model B

2020-04-06T23:52:00.038-05:00

In the last days/weeks I'm seeing people talking about "AdGuard" instead of "pi-hole" so I decided to give it a try.

These are the steps I followed to install it using the Raspberry Pi 2 Model B where I have pi-hole running at the moment.

First, stop/disable pi-hole:

pi@localhost:~ $ pihole disable
[i] Disabling blocking
[✓] Reloading DNS service
[✓] Pi-hole Disabled

pi@localhost:~ $ sudo systemctl stop lighttpd
pi@localhost:~ $ sudo systemctl disable lighttpd
Synchronizing state of lighttpd.service with SysV service script with /lib/systemd/systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable lighttpd

pi@localhost:~ $ sudo pihole disable
[i] Blocking already disabled, nothing to do

pi@localhost:~ $ sudo systemctl stop pihole-FTL
pi@localhost:~ $ sudo systemctl disable pihole-FTL
pihole-FTL.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable pihole-FTL

Now proceed to download/install/configure AdGuard

pi@localhost:~ $ sudo su -
root@localhost:~# cd /usr/local
root@localhost:/usr/local# wget https://static.adguard.com/adguardhome/release/AdGuardHome_linux_armv5.tar.gz
--2020-04-06 19:34:56-- https://static.adguard.com/adguardhome/release/AdGuardHome_linux_armv5.tar.gz
Resolving static.adguard.com (static.adguard.com)... 104.20.31.130, 104.20.30.130, 2606:4700:10::6814:1e82, ...
Connecting to static.adguard.com (static.adguard.com)|104.20.31.130|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6202594 (5.9M) [application/octet-stream]
Saving to: ‘AdGuardHome_linux_armv5.tar.gz’

100%[===================================================================>] 6,202,594   4.62MB/s   in 1.3s

2020-04-06 19:34:59 (4.62 MB/s) - ‘AdGuardHome_linux_armv5.tar.gz’ saved [6202594/6202594]

root@localhost:/usr/local# logout

pi@localhost:/usr/local $ ls -l
total 12052
-rw-r--r-- 1 root staff 6202594 Apr 6 19:35 AdGuardHome_linux_armv5.tar.gz
pi@localhost:/usr/local $ sudo tar xvf AdGuardHome_linux_armv5.tar.gz
AdGuardHome/
AdGuardHome/AdGuardHome
AdGuardHome/README.md
AdGuardHome/LICENSE.txt

pi@localhost:/usr/local/ $ cd AdGuardHome/
pi@localhost:/usr/local/AdGuardHome $ ls -l
total 12788
-rwxr-xr-x 1 1002 1002 13041664 Mar 13 03:41 AdGuardHome
-rw-r--r-- 1 1002 1002    35149 Mar 13 03:40 LICENSE.txt
-rw-r--r-- 1 1002 1002    12670 Mar 13 03:40 README.md

And I had to open the port 3000 via iptables and connect!

I added the following to the iptables configuration:

-A INPUT -p tcp -m tcp --dport 3000 -j ACCEPT

pi@localhost:/etc# sudo iptables-restore < /etc/iptables.firewall.rules

Next you install and set your user/password via http

pi@localhost:/usr/local/AdGuardHome $ sudo ./AdGuardHome -s install
2020/04/06 19:57:37 [info] Service control action: install
2020/04/06 19:57:38 [info] Service has been started
2020/04/06 19:57:38 [info] Almost ready!
AdGuard Home is successfully installed and will automatically start on boot.
There are a few more things that must be configured before you can use it.
Click on the link below and follow the Installation Wizard steps to finish setup.
2020/04/06 19:57:38 [info] AdGuard Home is available on the following addresses:
2020/04/06 19:57:38 [info] Go to http://127.0.0.1:3000
2020/04/06 19:57:38 [info] Go to http://192.168.1.2:3000
2020/04/06 19:57:38 [info] Action install has been done successfully on linux-systemd

Here are the other commands you might need to control the service.

    AdGuardHome -s uninstall - uninstalls the AdGuard Home service.
    AdGuardHome -s start - starts the service.
    AdGuardHome -s stop - stops the service.
    AdGuardHome -s restart - restarts the service.
    AdGuardHome -s status - shows the current service status.

pi@localhost:/usr/local/AdGuardHome $ sudo /usr/local/AdGuardHome/AdGuardHome -s status
2020/04/06 19:59:37 [info] Service control action: status
2020/04/06 19:59:37 [info] Service is running
2020/04/06 19:59:37 [info] Action status has been done successfully on linux-systemd

After this open your browser, go to your ip/hostname:3000 set your user/password, finish the configuration and after this, make sure that you are really using AdGuard, that you are not using "resolver" or something similar set by the operating system.

I tried to keep my "how-to" clean and I don't think it has errors so, if you find errors please let me know.

STAR WARS™ Special Edition Notebook and PCIe Bus error severity=Corrected

2020-03-07T00:21:00.022-06:00

A couple of years ago, wife needed a new laptop and bought a new notebook, the "STAR WARS™ Special Edition Notebook" specifically... because "star wars".

You can see the model here: https://www8.hp.com/us/en/campaigns/HP_Star_Wars_laptop/overview.html

She decided first to use the Windows OS and later to have dual OS having Windows and GNU/Linux. Some time later she went full with GNU/Linux distribution.

November 11th - The notebook started to fail at boot, you can imagine that after this time the hard drive could have issues and that's what we confirmed. She'll buy a new hard drive... some time in the future.

November 30, 2019 the future was that day and the 1TB hard drive was dead.

When we had the new hard drive installed and ready, we tried with OpenSuSe but after the installation was done and first boot completed, it felt "slow" and we considered it was too much for this laptop and we decided to try with Mint.

Again after the installation was done and session started after some minutes the system hang, this time I went to one of the terminals just to find a lot of lines reporting

"PCIe Bus Error: severity=Corrected....."

Restarting was not working because as the system came up, it hang. As she didn't have time to research why this was happening I re-installed again using Ubuntu this time.

And once again, after installation/session started... randomly was hanging/freezing, went to check again the terminal and the "PCIe Bus Error...." message again.

This time I opted to do search why this was happening and the answer was found here: https://askubuntu.com/questions/771899/pcie-bus-error-severity-corrected

"Try this,

Use this link ( about the adding paramter to kernel here) to understand about adding kernel boot paramter temporarily and making it permanent. Then,

Add the parameter , pci=nomsi

And reboot.

If the problem is solved then make the change permanent. If does not work then try,

pci=noaer

same way and make it permanent if this works.

(*Reason for appearance is related to the recent Intel Skylake architecture CPUs and Realtek rtl8723be wireless adaptor.

The ubuntu team knows about it. Read more here Bug_track_ubuntu_PCIe bus error ) "

Nice... so... how do we make this permanent?

The answer is here: https://askubuntu.com/questions/19486/how-do-i-add-a-kernel-boot-parameter

"To temporarily add a boot parameter to a kernel:

Start your system and wait for the GRUB menu to show (if you don't see a GRUB menu, press and hold the left Shift key right after starting the system).
Now highlight the kernel you want to use, and press the e key. You should be able to see and edit the commands associated with the highlighted kernel.
Go down to the line starting with linux and add your parameter foo=bar to its end.
Now press Ctrl + x to boot.

To make this change permanent:

From a terminal (or after pressing Alt + F2) run:
```
gksudo gedit /etc/default/grub
```
(or use sudo nano if gksudo or gedit are not available) and enter your password.
Find the line starting with GRUB_CMDLINE_LINUX_DEFAULT and append foo=bar to its end. For example:
```
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash foo=bar"
```
Save the file and close the editor.
Finally, start a terminal and run:
```
sudo update-grub
```
to update GRUB's configuration file (you probably need to enter your password).

On the next reboot, the kernel should be started with the boot parameter. To permanently remove it, simply remove the parameter from GRUB_CMDLINE_LINUX_DEFAULT and run sudo update-grub again.

To verify your changes, you can see exactly what parameters your kernel booted with by executing cat /proc/cmdline.

Wiki Page:

https://help.ubuntu.com/community/BootOptions"

After these changes were applied, the notebook worked like a charm... I wanted to go back and try OpenSuse/Mint but she had to keep working.

Who knows.. maybe in the future ;-)

Trying pi-hole to block ads, trackers and more.

2020-02-29T21:33:00.002-06:00

In the last months I've been using pi-hole to block ads/trackers/etc, here's a guide based on the official document and examples found on different sites/blogs.

I'm using a Raspberry Pi 2 Model B along with raspbian

- Download/install/configure pi-hole

# curl -sSL https://install.pi-hole.net | bash

The installation script runs and you'll be shown the following: "This installer will transform your device into a network-wide ad blocker! "

The next step requires you to provide the DNS upstream servers, consider using the Cloudfare DNS servers 1.1.1.1 and 1.0.0.1 or the DNS server you want.

The installation is done and you should get the message:

Installation Complete!

The next steps depends on your home network configuration, on your router find the section where you set the DNS server and use the ip address that you configured for pi-hole.

Now, open your favorite web browser and point it to the ip address assigned to the host where you are doing this configuration adding /admin at the end.

You'll be at the main dashboard of pi-hole and you can see the stats/settings/logs, add more lists.

I didn't give more details about the installation of pi-hole 'cause those are well covered by the documentation provided by the team developing pi-hole, what I didn't found was a section explaining how to add a little more security using a firewall.

- Configure a firewall.

This section is about how to make iptable configurations to load on every reboot.

If you want to know about building proper rules, please do your own research.

I use iptables but you might want to use ufw or any other option available to configure your own firewall, some steps to take before going further:

# apt-get dist-upgrade

# apt-get update

Then I installed iptables-persistent package with apt-get command:

# apt-get install iptables-persistent

On the menu, selected Yes for the rules.v4 file. The second choice was rule.v6 and IPv6 support, configure them based on your network configuration.

Then, edit the file rules.v4

# vi /etc/iptables/rules.v4

Now you can see the existing iptables configuration, no rules are setup yet, it is completely empty:

# Generated by iptables-save v1.6.0 on Mon Apr 29 03:27:41 2019
    *filter
    :INPUT ACCEPT [5897:7430402]
    :FORWARD ACCEPT [0:0]
    :OUTPUT ACCEPT [1767:169364]
    COMMIT
# Completed on Mon Apr 29 03:27:41 2019

You can start building your iptables using this file, adding the rules you need one per line before the COMMIT command. When you're done, save the file.

Also, I found a suggestion to add at least the following rule, in order to validate:

-A INPUT -p icmp -m icmp –icmp-type 8 -j REJECT

Now ping your device, it should respond normally and perform a reboot:

# reboot

When your device is back on do a ping request again and this time you should get the “Destination port unreachable” message. Now feel free to add the rest of the rules you need.

If your line COMMIT fails maybe there are some mistakes before this line. Check each single line in your configuration file.

After I configured iptables and added more lists to pi-hole the amount of ads I saw decreased considerably but you might have to check if those lists are maintained/available or search for new.

Sometimes you might be unable to access them with no error message or something that gives you a clue why, just remember that you have a pi-hole and search the logs, disable it for a few minutes and confirm you can access the web site, after that you'll have to search which list is blocking it, contact the person who provide the list and ask to remove it or add it to the "white list" section.

I would like to see other options in the future, like configurations for specific devices, more details from the stats. So far so good, it does what is says, block the ads and it works also for an openvpn mobile client!!!

DevOps Days GDL 2020

2020-02-17T22:42:00.002-06:00

Do you want to know what #DevOpsDays is and why you shouldn't miss it?

"DevOpsDays is a series of conferences happening around the world, and DevOpsDays Guadalajara will be the first edition in Mexico."

For more info:
https://devopsdays.org/guadalajara

If you can read this...

2020-01-25T09:28:00.000-06:00

If you can read this....

Source:

Onwards! pic.twitter.com/QEoeAbQu3s — Murdock (@Generic42) January 25, 2020

All the World's aircraft carriers.

2019-12-19T11:59:00.000-06:00

All the World's aircraft carriers

Strategic business value of the blockchain

2019-12-09T11:02:00.000-06:00

How will blockchain change the game?

Country ETFs 2019 Total returns

2019-12-02T10:49:00.000-06:00

Volumes vs Traffic

2019-11-17T17:47:00.000-06:00

VOLUMES VS TRAFFIC EXCHANGES IN OCTOBER 2019

Futurism

2019-11-06T18:01:00.000-06:00

Futurism

Install Brave browser on CentOS 7

2019-10-24T23:24:00.001-05:00

I've been trying to install the Brave browser on CentOS 7 for some time now.

The problem was that you had to use an option that is not considered safe to make it work and I opted not to use it that way.

Today I went back to check the progress made and if a new option was available to get it installed/running with CentOS 7 (release 7.7.1908).

The good news is yes but, you have to use a specific version.

If you are using CentOS 8 the instructions here might work for you, if you are working with CentOS 7 don't follow them because as stated by "fmarier" on this link:

< Given that CentOS 8 is now out and that we do not currently have the resources to do the work necessary to fix the glibc and the keysigning issues specific to CentOS/RHEL 7, we have decided not to support that version at this time and to instead allocate our time to the Linux distros which are currently working. >

So, how do we install Brave?! Here's another link with a post from "jseidl":

"We’ve identified that the latest release that installs cleanly on CentOS/RHEL 7 is v0.62.51.

You can download the RPM here: https://github.com/brave/brave-browser/releases/tag/v0.62.51 60
You will need to enable user namespaces:
echo 10000 > /proc/sys/user/max_user_namespaces "

I downloaded the rpm package and install it using rpm:

# rpm -ivh brave-browser-0.62.51-1.x86_64.rpm
error: Failed dependencies:
/usr/bin/lsb_release is needed by brave-browser-0.62.51-1.x86_64
liberation-fonts is needed by brave-browser-0.62.51-1.x86_64

I installed the "failed dependencies" (consider that for your system you might need to install other packages to satisfy dependencies use "yum provides" if needed):

# yum install redhat-lsb-core
Loaded plugins: fastestmirror, langpacks, remove-with-leaves
Loading mirror speeds from cached hostfile
* base: mirror.den1.denvercolo.net
* epel: mirror.dal.nexril.net
* epel-debuginfo: mirror.dal.nexril.net
* extras: mirror.fileplanet.com
* nux-dextop: mirror.li.nux.ro
* updates: mirror.netdepot.com
Resolving Dependencies
--> Running transaction check
---> Package redhat-lsb-core.x86_64 0:4.1-27.el7.centos.1 will be installed
--> Processing Dependency: redhat-lsb-submod-security(x86-64) = 4.1-27.el7.centos.1 for package: redhat-lsb-core-4.1-27.el7.centos.1.x86_64
--> Processing Dependency: spax for package: redhat-lsb-core-4.1-27.el7.centos.1.x86_64
--> Running transaction check
---> Package redhat-lsb-submod-security.x86_64 0:4.1-27.el7.centos.1 will be installed
---> Package spax.x86_64 0:1.5.2-13.el7 will be installed
--> Finished Dependency Resolution
--> Finding unneeded leftover dependencies
Found and removing 0 unneeded dependencies

Dependencies Resolved

====================================================
Package                                  Arch          Version               Repository     Size
====================================================
Installing:
redhat-lsb-core                      x86_64      4.1-27.el7.centos.1    base            38 k
Installing for dependencies:
redhat-lsb-submod-security x86_64      4.1-27.el7.centos.1     base           15 k
spax                                       x86_64      1.5.2-13.el7                base            260 k

Transaction Summary
====================================================
Install 1 Package (+2 Dependent packages)

Total download size: 312 k
Installed size: 635 k
Is this ok [y/d/N]: y
Downloading packages:
(1/3): redhat-lsb-core-4.1-27.el7.centos.1.x86_64.rpm              | 38 kB 00:00:00
(2/3): redhat-lsb-submod-security-4.1-27.el7.centos.1.x86_64.rpm     | 15 kB 00:00:00
(3/3): spax-1.5.2-13.el7.x86_64.rpm                                                     | 260 kB 00:00:00
-------------------------------------------------------------------------------------------------------------------------------------
Total                                                                                       418 kB/s | 312 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : spax-1.5.2-13.el7.x86_64                                                        1/3
Installing : redhat-lsb-submod-security-4.1-27.el7.centos.1.x86_64        2/3
Installing : redhat-lsb-core-4.1-27.el7.centos.1.x86_64                           3/3
Verifying : redhat-lsb-submod-security-4.1-27.el7.centos.1.x86_64        1/3
Verifying : spax-1.5.2-13.el7.x86_64                                                        2/3
Verifying : redhat-lsb-core-4.1-27.el7.centos.1.x86_64                           3/3

Installed:

redhat-lsb-core.x86_640:4.1-27.el7.centos.1

Dependency Installed:
redhat-lsb-submod-security.x86_64 0:4.1-27.el7.centos.1 spax.x86_64 0:1.5.2-13.el7

Complete!

# yum install liberation-fonts
Loaded plugins: fastestmirror, langpacks, remove-with-leaves
Loading mirror speeds from cached hostfile
* base: mirror.den1.denvercolo.net
* epel: mirror.dal.nexril.net
* epel-debuginfo: mirror.dal.nexril.net
* extras: mirror.fileplanet.com
* nux-dextop: mirror.li.nux.ro
* updates: mirror.netdepot.com
Resolving Dependencies
--> Running transaction check
---> Package liberation-fonts.noarch 1:1.07.2-16.el7 will be installed
--> Processing Dependency: liberation-narrow-fonts = 1:1.07.2-16.el7 for package: 1:liberation-fonts-1.07.2-16.el7.noarch
--> Running transaction check
---> Package liberation-narrow-fonts.noarch 1:1.07.2-16.el7 will be installed
--> Finished Dependency Resolution
--> Finding unneeded leftover dependencies
Found and removing 0 unneeded dependencies

Dependencies Resolved

========================================================
Package                                  Arch          Version                     Repository                  Size
========================================================
Installing:
liberation-fonts                     noarch          1:1.07.2-16.el7             base                       13 k
Installing for dependencies:
liberation-narrow-fonts      noarch 1:1.07.2-16.el7              base                       202 k

Transaction Summary
========================================================
Install 1 Package (+1 Dependent package)

Total download size: 215 k
Installed size: 474 k
Is this ok [y/d/N]: y
Downloading packages:
(1/2): liberation-fonts-1.07.2-16.el7.noarch.rpm                                              | 13 kB 00:00:00
(2/2): liberation-narrow-fonts-1.07.2-16.el7.noarch.rpm                                 | 202 kB 00:00:00
-----------------------------------------------------------------------------------------------------------------------------------
Total                                                                                                   331 kB/s | 215 kB 00:00:00
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : 1:liberation-narrow-fonts-1.07.2-16.el7.noarch 1/2
Installing : 1:liberation-fonts-1.07.2-16.el7.noarch                2/2
Verifying : 1:liberation-narrow-fonts-1.07.2-16.el7.noarch   1/2

Verifying : 1:liberation-fonts-1.07.2-16.el7.noarch 2/2

Installed:
liberation-fonts.noarch 1:1.07.2-16.el7

Dependency Installed:
liberation-narrow-fonts.noarch 1:1.07.2-16.el7

Complete!

# rpm -ivh brave-browser-0.62.51-1.x86_64.rpm
Preparing... ################################# [100%]
Updating / installing...
1:brave-browser-0.62.51-1 ################################# [100%]
Redirecting to /bin/systemctl start atd.service

Remember this step!:

echo 10000 > /proc/sys/user/max_user_namespaces

And.... voilà!

TL;DR:

1.- Download this RPM: https://github.com/brave/brave-browser/releases/tag/v0.62.51 60

2.- Satisfy the dependencies for your system, for me were two packages (use "yum provides" if needed):

yum install redhat-lsb-core liberation-fonts -y

3.- Install the rpm

rpm -ivh brave-browser-0.62.51-1.x86_64.rpm

4.- You need to enable user namespaces:

echo 10000 > /proc/sys/user/max_user_namespaces

5.- You should have brave running.

Now, that is an older version suggested for people using CentOS 7, you can try with newer versions and check/confirm if they work for you. At least that's what I plan to do.

You can get them here: https://github.com/brave/brave-browser/releases/

My OnePlus 6 has a screen flickering issue.

2019-10-14T17:53:00.002-05:00

Yesterday I saw something similar like when you take a snapshot while using the OnePlus 6, my impression was that I somehow took one but I was wrong.

Somehow I saw it flickering when I pressed the power button, eventually the battery was empty and after I recharged the flickering happened again.

Today in the morning happened again and I had enough, after some research found this page with instructions to fix it, my biggest concern was that it could be related to hardware, yesterday the cell phone slipped from my hand and although the hit against the ground was not strong I was suspicious that could be related.

The first solution (reboot) didn't worked.

The second solution (delete system cache) I tough it worked until I saw the flickering happening again trying to unblock the cell and doing a reboot.

I didn't try the third solution (a reset which implies losing all the data) or the fourth option (send it to "OnePlus service" which is not an option for me) and started searching again for another alternative and I had the good look to find someone who had the same problem and made a video.

The solution (I'm not sure if it's the right one but works for me) came from one of the comments:

"Open setting/utilities/one plus laboratory/ DC dimming /ON"

And the issue is gone!

Steps to install VirtualBox guest additions on CentOS 8

2019-10-13T20:58:00.002-05:00

After you complete your favorite option (Workstation, Server, etc) of CentOS 8 as a virtual machine using VirtualBox you're going to need to install the following packages (note that I'm using 'dnf' instead of yum which is a softlink):

# which yum

/usr/bin/yum

# which dnf

/usr/bin/dnf

# ls -ld /usr/bin/yum

lrwxrwxrwx. 1 root root 5 May 13 14:34 /usr/bin/yum - dnf-3

# dnf install kernel-devel-$(uname -r) kernel-headers perl gcc make elfutils-libelf-devel

After this, you can proceed as usual to the VirtualBox menu "Devices" and choose the option at the bottom "Insert Guest Additions CD image..."

And follow the usual steps when a window pop-up asking you to run the script and proceed with the compilation/installation of the module.

What follows is the output of the installation of the packages from previous command (if you choose the "workstation" option:

# dnf install kernel-devel-$(uname -r) kernel-headers perl gcc make elfutils-libelf-devel
CentOS-8 - Extras                                      337 B/s | 2.1 kB     00:06
Package kernel-headers-4.18.0-80.11.2.el8_0.x86_64 is already installed.
Package gcc-8.2.1-3.5.el8.x86_64 is already installed.
Dependencies resolved.
=======================================================================================
Package                         Arch      Version                  Repository    Size
=======================================================================================
Installing:
perl                            x86_64    4:5.26.3-416.el8         AppStream     72 k
elfutils-libelf-devel           x86_64    0.174-6.el8              BaseOS        53 k
kernel-devel                    x86_64    4.18.0-80.11.2.el8_0     BaseOS        12 M
make                            x86_64    1:4.2.1-9.el8            BaseOS       498 k
Installing dependencies:
perl-Algorithm-Diff             noarch    1.1903-9.el8             AppStream     52 k
perl-Archive-Tar                noarch    2.30-1.el8               AppStream     79 k
perl-Archive-Zip                noarch    1.60-3.el8               AppStream    108 k
perl-Attribute-Handlers         noarch    0.99-416.el8             AppStream     88 k
perl-B-Debug                    noarch    1.26-2.el8               AppStream     26 k
perl-CPAN                       noarch    2.18-397.el8             AppStream    554 k
perl-CPAN-Meta                  noarch    2.150010-396.el8         AppStream    191 k
perl-CPAN-Meta-Requirements     noarch    2.140-396.el8            AppStream     37 k
perl-CPAN-Meta-YAML             noarch    0.018-397.el8            AppStream     34 k
perl-Compress-Bzip2             x86_64    2.26-6.el8               AppStream     72 k
perl-Compress-Raw-Bzip2         x86_64    2.081-1.el8              AppStream     40 k
perl-Compress-Raw-Zlib          x86_64    2.081-1.el8              AppStream     68 k
perl-Config-Perl-V              noarch    0.30-1.el8               AppStream     22 k
perl-DB_File                    x86_64    1.842-1.el8              AppStream     83 k
perl-Data-OptList               noarch    0.110-6.el8              AppStream     31 k
perl-Data-Section               noarch    0.200007-3.el8           AppStream     30 k
perl-Devel-PPPort               x86_64    3.36-5.el8               AppStream    118 k
perl-Devel-Peek                 x86_64    1.26-416.el8             AppStream     93 k
perl-Devel-SelfStubber          noarch    1.06-416.el8             AppStream     75 k
perl-Devel-Size                 x86_64    0.81-2.el8               AppStream     34 k
perl-Digest-SHA                 x86_64    1:6.02-1.el8             AppStream     66 k
perl-Encode-devel               x86_64    4:2.97-3.el8             AppStream     39 k
perl-Env                        noarch    1.04-395.el8             AppStream     21 k
perl-ExtUtils-CBuilder          noarch    1:0.280230-2.el8         AppStream     48 k
perl-ExtUtils-Command           noarch    1:7.34-1.el8             AppStream     19 k
perl-ExtUtils-Embed             noarch    1.34-416.el8             AppStream     79 k
perl-ExtUtils-Install           noarch    2.14-4.el8               AppStream     46 k
perl-ExtUtils-MM-Utils          noarch    1:7.34-1.el8             AppStream     17 k
perl-ExtUtils-MakeMaker         noarch    1:7.34-1.el8             AppStream    300 k
perl-ExtUtils-Manifest          noarch    1.70-395.el8             AppStream     37 k
perl-ExtUtils-Miniperl          noarch    1.06-416.el8             AppStream     76 k
perl-ExtUtils-ParseXS           noarch    1:3.35-2.el8             AppStream     83 k
perl-File-Fetch                 noarch    0.56-2.el8               AppStream     33 k
perl-File-HomeDir               noarch    1.002-4.el8              AppStream     61 k
perl-File-Which                 noarch    1.22-2.el8               AppStream     23 k
perl-Filter                     x86_64    2:1.58-2.el8             AppStream     82 k
perl-Filter-Simple              noarch    0.94-2.el8               AppStream     29 k
perl-IO-Compress                noarch    2.081-1.el8              AppStream    258 k
perl-IO-Zlib                    noarch    1:1.10-416.el8           AppStream     80 k
perl-IPC-Cmd                    noarch    2:1.02-1.el8             AppStream     43 k
perl-IPC-SysV                   x86_64    2.07-397.el8             AppStream     43 k
perl-IPC-System-Simple          noarch    1.25-17.el8              AppStream     43 k
perl-JSON-PP                    noarch    1:2.97.001-3.el8         AppStream     68 k
perl-Locale-Codes               noarch    3.57-1.el8               AppStream    311 k
perl-Locale-Maketext            noarch    1.28-396.el8             AppStream     99 k
perl-Locale-Maketext-Simple     noarch    1:0.21-416.el8           AppStream     78 k
perl-MRO-Compat                 noarch    0.13-4.el8               AppStream     24 k
perl-Math-BigInt-FastCalc       x86_64    0.500.600-6.el8          AppStream     27 k
perl-Math-BigRat                noarch    0.2614-1.el8             AppStream     40 k
perl-Memoize                    noarch    1.03-416.el8             AppStream    118 k
perl-Module-Build               noarch    2:0.42.24-5.el8          AppStream    273 k
perl-Module-CoreList            noarch    1:5.20181130-1.el8       AppStream     87 k
perl-Module-CoreList-tools      noarch    1:5.20181130-1.el8       AppStream     22 k
perl-Module-Load                noarch    1:0.32-395.el8           AppStream     19 k
perl-Module-Load-Conditional    noarch    0.68-395.el8             AppStream     24 k
perl-Module-Loaded              noarch    1:0.08-416.el8           AppStream     74 k
perl-Module-Metadata            noarch    1.000033-395.el8         AppStream     44 k
perl-Net-Ping                   noarch    2.55-416.el8             AppStream    101 k
perl-Package-Generator          noarch    1.106-11.el8             AppStream     27 k
perl-Params-Check               noarch    1:0.38-395.el8           AppStream     24 k
perl-Params-Util                x86_64    1.07-22.el8              AppStream     44 k
perl-Perl-OSType                noarch    1.010-396.el8            AppStream     29 k
perl-PerlIO-via-QuotedPrint     noarch    0.08-395.el8             AppStream     13 k
perl-Pod-Checker                noarch    4:1.73-395.el8           AppStream     33 k
perl-Pod-Html                   noarch    1.22.02-416.el8          AppStream     87 k
perl-Pod-Parser                 noarch    1.63-396.el8             AppStream    108 k
perl-SelfLoader                 noarch    1.23-416.el8             AppStream     82 k
perl-Software-License           noarch    0.103013-2.el8           AppStream    138 k
perl-Sub-Exporter               noarch    0.987-15.el8             AppStream     73 k
perl-Sub-Install                noarch    0.928-14.el8             AppStream     27 k
perl-Sys-Syslog                 x86_64    0.35-397.el8             AppStream     50 k
perl-Test                       noarch    1.30-416.el8             AppStream     89 k
perl-Test-Harness               noarch    1:3.42-1.el8             AppStream    279 k
perl-Test-Simple                noarch    1:1.302135-1.el8         AppStream    516 k
perl-Text-Balanced              noarch    2.03-395.el8             AppStream     58 k
perl-Text-Diff                  noarch    1.45-2.el8               AppStream     45 k
perl-Text-Glob                  noarch    0.11-4.el8               AppStream     17 k
perl-Text-Template              noarch    1.51-1.el8               AppStream     64 k
perl-Thread-Queue               noarch    3.13-1.el8               AppStream     24 k
perl-Time-HiRes                 x86_64    1.9758-1.el8             AppStream     61 k
perl-Time-Piece                 x86_64    1.31-416.el8             AppStream     98 k
perl-Unicode-Collate            x86_64    1.25-2.el8               AppStream    686 k
perl-autodie                    noarch    2.29-396.el8             AppStream     98 k
perl-bignum                     noarch    0.49-2.el8               AppStream     44 k
perl-devel                      x86_64    4:5.26.3-416.el8         AppStream    599 k
perl-encoding                   x86_64    4:2.22-3.el8             AppStream     68 k
perl-experimental               noarch    0.019-2.el8              AppStream     24 k
perl-inc-latest                 noarch    2:0.500-9.el8            AppStream     25 k
perl-libnetcfg                  noarch    4:5.26.3-416.el8         AppStream     77 k
perl-local-lib                  noarch    2.000024-2.el8           AppStream     74 k
perl-open                       noarch    1.11-416.el8             AppStream     77 k
perl-perlfaq                    noarch    5.20180605-1.el8         AppStream    386 k
perl-utils                      noarch    5.26.3-416.el8           AppStream    128 k
perl-version                    x86_64    6:0.99.24-1.el8          AppStream     67 k
systemtap-sdt-devel             x86_64    4.0-7.el8                AppStream     79 k
perl-Math-BigInt                noarch    1:1.9998.11-5.el8        BaseOS       195 k
perl-Math-Complex               noarch    1.59-416.el8             BaseOS       108 k
python3-pyparsing               noarch    2.1.10-7.el8             BaseOS       142 k
zlib-devel                      x86_64    1.2.11-10.el8            BaseOS        56 k
Installing weak dependencies:
perl-Encode-Locale              noarch    1.05-9.el8               AppStream     21 k

Transaction Summary
=======================================================================================
Install 104 Packages

Total download size: 22 M
Installed size: 73 M
Is this ok [y/N]: y
Downloading Packages:
(1/104): perl-Algorithm-Diff-1.1903-9.el8.noarch.rpm    43 kB/s | 52 kB     00:01
(2/104): perl-5.26.3-416.el8.x86_64.rpm                 60 kB/s | 72 kB     00:01
(3/104): perl-Archive-Tar-2.30-1.el8.noarch.rpm         65 kB/s | 79 kB     00:01
(4/104): perl-B-Debug-1.26-2.el8.noarch.rpm            299 kB/s | 26 kB     00:00
(5/104): perl-Archive-Zip-1.60-3.el8.noarch.rpm        1.1 MB/s | 108 kB     00:00
(6/104): perl-Attribute-Handlers-0.99-416.el8.noarch.r 567 kB/s | 88 kB     00:00
(7/104): perl-CPAN-Meta-2.150010-396.el8.noarch.rpm    1.6 MB/s | 191 kB     00:00
(8/104): perl-CPAN-Meta-Requirements-2.140-396.el8.noa 510 kB/s | 37 kB     00:00
(9/104): perl-CPAN-Meta-YAML-0.018-397.el8.noarch.rpm 434 kB/s | 34 kB     00:00
(10/104): perl-Compress-Bzip2-2.26-6.el8.x86_64.rpm    1.2 MB/s | 72 kB     00:00
(11/104): perl-CPAN-2.18-397.el8.noarch.rpm            2.2 MB/s | 554 kB     00:00
(12/104): perl-Compress-Raw-Bzip2-2.081-1.el8.x86_64.r 737 kB/s | 40 kB     00:00
(13/104): perl-Compress-Raw-Zlib-2.081-1.el8.x86_64.rp 690 kB/s | 68 kB     00:00
(14/104): perl-Config-Perl-V-0.30-1.el8.noarch.rpm     434 kB/s | 22 kB     00:00
(15/104): perl-DB_File-1.842-1.el8.x86_64.rpm          860 kB/s | 83 kB     00:00
(16/104): perl-Data-OptList-0.110-6.el8.noarch.rpm     314 kB/s | 31 kB     00:00
(17/104): perl-Data-Section-0.200007-3.el8.noarch.rpm 309 kB/s | 30 kB     00:00
(18/104): perl-Devel-PPPort-3.36-5.el8.x86_64.rpm      1.1 MB/s | 118 kB     00:00
(19/104): perl-Devel-SelfStubber-1.06-416.el8.noarch.r 1.4 MB/s | 75 kB     00:00
(20/104): perl-Devel-Peek-1.26-416.el8.x86_64.rpm      1.6 MB/s | 93 kB     00:00
(21/104): perl-Devel-Size-0.81-2.el8.x86_64.rpm        642 kB/s | 34 kB     00:00
(22/104): perl-Encode-Locale-1.05-9.el8.noarch.rpm     420 kB/s | 21 kB     00:00
(23/104): perl-Digest-SHA-6.02-1.el8.x86_64.rpm        636 kB/s | 66 kB     00:00
(24/104): perl-Env-1.04-395.el8.noarch.rpm             397 kB/s | 21 kB     00:00
(25/104): perl-Encode-devel-2.97-3.el8.x86_64.rpm      664 kB/s | 39 kB     00:00
(26/104): perl-ExtUtils-CBuilder-0.280230-2.el8.noarch 967 kB/s | 48 kB     00:00
(27/104): perl-ExtUtils-Command-7.34-1.el8.noarch.rpm 377 kB/s | 19 kB     00:00
(28/104): perl-ExtUtils-Embed-1.34-416.el8.noarch.rpm 834 kB/s | 79 kB     00:00
(29/104): perl-ExtUtils-Install-2.14-4.el8.noarch.rpm 923 kB/s | 46 kB     00:00
(30/104): perl-ExtUtils-MM-Utils-7.34-1.el8.noarch.rpm 340 kB/s | 17 kB     00:00
(31/104): perl-ExtUtils-Miniperl-1.06-416.el8.noarch.r 791 kB/s | 76 kB     00:00
(32/104): perl-ExtUtils-ParseXS-3.35-2.el8.noarch.rpm 281 kB/s | 83 kB     00:00
(33/104): perl-ExtUtils-MakeMaker-7.34-1.el8.noarch.rp 745 kB/s | 300 kB     00:00
(34/104): perl-ExtUtils-Manifest-1.70-395.el8.noarch.r 91 kB/s | 37 kB     00:00
(35/104): perl-File-HomeDir-1.002-4.el8.noarch.rpm     1.2 MB/s | 61 kB     00:00
(36/104): perl-Filter-1.58-2.el8.x86_64.rpm            948 kB/s | 82 kB     00:00
(37/104): perl-File-Fetch-0.56-2.el8.noarch.rpm        163 kB/s | 33 kB     00:00
(38/104): perl-File-Which-1.22-2.el8.noarch.rpm        120 kB/s | 23 kB     00:00
(39/104): perl-Filter-Simple-0.94-2.el8.noarch.rpm     462 kB/s | 29 kB     00:00
(40/104): perl-IO-Zlib-1.10-416.el8.noarch.rpm         1.5 MB/s | 80 kB     00:00
(41/104): perl-IPC-Cmd-1.02-1.el8.noarch.rpm           454 kB/s | 43 kB     00:00
(42/104): perl-IPC-SysV-2.07-397.el8.x86_64.rpm        458 kB/s | 43 kB     00:00
(43/104): perl-IPC-System-Simple-1.25-17.el8.noarch.rp 823 kB/s | 43 kB     00:00
(44/104): perl-IO-Compress-2.081-1.el8.noarch.rpm      1.2 MB/s | 258 kB     00:00
(45/104): perl-JSON-PP-2.97.001-3.el8.noarch.rpm       1.1 MB/s | 68 kB     00:00
(46/104): perl-Locale-Maketext-1.28-396.el8.noarch.rpm 1.8 MB/s | 99 kB     00:00
(47/104): perl-Locale-Maketext-Simple-0.21-416.el8.noa 868 kB/s | 78 kB     00:00
(48/104): perl-MRO-Compat-0.13-4.el8.noarch.rpm        283 kB/s | 24 kB     00:00
(49/104): perl-Locale-Codes-3.57-1.el8.noarch.rpm      1.5 MB/s | 311 kB     00:00
(50/104): perl-Math-BigInt-FastCalc-0.500.600-6.el8.x8 294 kB/s | 27 kB     00:00
(51/104): perl-Math-BigRat-0.2614-1.el8.noarch.rpm     753 kB/s | 40 kB     00:00
(52/104): perl-Memoize-1.03-416.el8.noarch.rpm         1.2 MB/s | 118 kB     00:00
(53/104): perl-Module-CoreList-5.20181130-1.el8.noarch 955 kB/s | 87 kB     00:00
(54/104): perl-Module-Build-0.42.24-5.el8.noarch.rpm   2.6 MB/s | 273 kB     00:00
(55/104): perl-Module-CoreList-tools-5.20181130-1.el8. 246 kB/s | 22 kB     00:00
(56/104): perl-Module-Load-0.32-395.el8.noarch.rpm     346 kB/s | 19 kB     00:00
(57/104): perl-Module-Load-Conditional-0.68-395.el8.no 271 kB/s | 24 kB     00:00
(58/104): perl-Module-Loaded-0.08-416.el8.noarch.rpm   1.3 MB/s | 74 kB     00:00
(59/104): perl-Module-Metadata-1.000033-395.el8.noarch 491 kB/s | 44 kB     00:00
(60/104): perl-Net-Ping-2.55-416.el8.noarch.rpm        1.8 MB/s | 101 kB     00:00
(61/104): perl-Package-Generator-1.106-11.el8.noarch.r 289 kB/s | 27 kB     00:00
(62/104): perl-Params-Check-0.38-395.el8.noarch.rpm    413 kB/s | 24 kB     00:00
(63/104): perl-Params-Util-1.07-22.el8.x86_64.rpm      456 kB/s | 44 kB     00:00
(64/104): perl-Perl-OSType-1.010-396.el8.noarch.rpm    269 kB/s | 29 kB     00:00
(65/104): perl-PerlIO-via-QuotedPrint-0.08-395.el8.noa 130 kB/s | 13 kB     00:00
(66/104): perl-Pod-Checker-1.73-395.el8.noarch.rpm     307 kB/s | 33 kB     00:00
(67/104): perl-Pod-Html-1.22.02-416.el8.noarch.rpm     872 kB/s | 87 kB     00:00
(68/104): perl-Pod-Parser-1.63-396.el8.noarch.rpm      1.0 MB/s | 108 kB     00:00
(69/104): perl-SelfLoader-1.23-416.el8.noarch.rpm      811 kB/s | 82 kB     00:00
(70/104): perl-Software-License-0.103013-2.el8.noarch. 2.5 MB/s | 138 kB     00:00
(71/104): perl-Sub-Install-0.928-14.el8.noarch.rpm     526 kB/s | 27 kB     00:00
(72/104): perl-Sys-Syslog-0.35-397.el8.x86_64.rpm      519 kB/s | 50 kB     00:00
(73/104): perl-Sub-Exporter-0.987-15.el8.noarch.rpm    481 kB/s | 73 kB     00:00
(74/104): perl-Test-1.30-416.el8.noarch.rpm            880 kB/s | 89 kB     00:00
(75/104): perl-Text-Balanced-2.03-395.el8.noarch.rpm   1.2 MB/s | 58 kB     00:00
(76/104): perl-Test-Harness-3.42-1.el8.noarch.rpm      2.7 MB/s | 279 kB     00:00
(77/104): perl-Text-Diff-1.45-2.el8.noarch.rpm         913 kB/s | 45 kB     00:00
(78/104): perl-Text-Glob-0.11-4.el8.noarch.rpm         185 kB/s | 17 kB     00:00
(79/104): perl-Text-Template-1.51-1.el8.noarch.rpm     694 kB/s | 64 kB     00:00
(80/104): perl-Thread-Queue-3.13-1.el8.noarch.rpm      256 kB/s | 24 kB     00:00
(81/104): perl-Time-HiRes-1.9758-1.el8.x86_64.rpm      646 kB/s | 61 kB     00:00
(82/104): perl-Time-Piece-1.31-416.el8.x86_64.rpm      1.0 MB/s | 98 kB     00:00
(83/104): perl-autodie-2.29-396.el8.noarch.rpm         1.0 MB/s | 98 kB     00:00
(84/104): perl-bignum-0.49-2.el8.noarch.rpm            558 kB/s | 44 kB     00:00
(85/104): perl-Unicode-Collate-1.25-2.el8.x86_64.rpm   2.1 MB/s | 686 kB     00:00
(86/104): perl-Test-Simple-1.302135-1.el8.noarch.rpm   776 kB/s | 516 kB     00:00
(87/104): perl-encoding-2.22-3.el8.x86_64.rpm          1.2 MB/s | 68 kB     00:00
(88/104): perl-experimental-0.019-2.el8.noarch.rpm     288 kB/s | 24 kB     00:00
(89/104): perl-devel-5.26.3-416.el8.x86_64.rpm         2.8 MB/s | 599 kB     00:00
(90/104): perl-inc-latest-0.500-9.el8.noarch.rpm       305 kB/s | 25 kB     00:00
(91/104): perl-local-lib-2.000024-2.el8.noarch.rpm     1.0 MB/s | 74 kB     00:00
(92/104): perl-libnetcfg-5.26.3-416.el8.noarch.rpm     797 kB/s | 77 kB     00:00
(93/104): perl-open-1.11-416.el8.noarch.rpm            800 kB/s | 77 kB     00:00
(94/104): perl-version-0.99.24-1.el8.x86_64.rpm        744 kB/s | 67 kB     00:00
(95/104): perl-utils-5.26.3-416.el8.noarch.rpm         902 kB/s | 128 kB     00:00
(96/104): perl-perlfaq-5.20180605-1.el8.noarch.rpm     2.0 MB/s | 386 kB     00:00
(97/104): systemtap-sdt-devel-4.0-7.el8.x86_64.rpm     1.5 MB/s | 79 kB     00:00
(98/104): elfutils-libelf-devel-0.174-6.el8.x86_64.rpm 176 kB/s | 53 kB     00:00
(99/104): make-4.2.1-9.el8.x86_64.rpm                  1.1 MB/s | 498 kB     00:00
(100/104): perl-Math-BigInt-1.9998.11-5.el8.noarch.rpm 647 kB/s | 195 kB     00:00
(101/104): perl-Math-Complex-1.59-416.el8.noarch.rpm   424 kB/s | 108 kB     00:00
(102/104): python3-pyparsing-2.1.10-7.el8.noarch.rpm   554 kB/s | 142 kB     00:00
(103/104): zlib-devel-1.2.11-10.el8.x86_64.rpm         370 kB/s | 56 kB     00:00
(104/104): kernel-devel-4.18.0-80.11.2.el8_0.x86_64.rp 5.4 MB/s | 12 MB     00:02
---------------------------------------------------------------------------------------
Total                                                  2.3 MB/s | 22 MB     00:09
warning: /var/cache/dnf/AppStream-a520ed22b0a8a736/packages/perl-5.26.3-416.el8.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 8483c65d: NOKEY
CentOS-8 - AppStream                                   1.6 MB/s | 1.6 kB     00:00
Importing GPG key 0x8483C65D:
Userid     : "CentOS (CentOS Official Signing Key) "
Fingerprint: 99DB 70FA E1D7 CE22 7FB6 4882 05B5 55B3 8483 C65D
From       : /etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
Is this ok [y/N]: y
Key imported successfully
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing        :                                                               1/1
Installing       : perl-version-6:0.99.24-1.el8.x86_64                         1/104
Installing       : perl-Time-HiRes-1.9758-1.el8.x86_64                         2/104
Installing       : perl-CPAN-Meta-Requirements-2.140-396.el8.noarch            3/104
Installing       : perl-ExtUtils-ParseXS-1:3.35-2.el8.noarch                   4/104
Installing       : perl-ExtUtils-Manifest-1.70-395.el8.noarch                  5/104
Installing       : perl-Test-Harness-1:3.42-1.el8.noarch                       6/104
Installing       : perl-Module-CoreList-1:5.20181130-1.el8.noarch              7/104
Installing       : perl-Module-Metadata-1.000033-395.el8.noarch                8/104
Installing       : perl-SelfLoader-1.23-416.el8.noarch                         9/104
Installing       : perl-Perl-OSType-1.010-396.el8.noarch                      10/104
Installing       : perl-Module-Load-1:0.32-395.el8.noarch                     11/104
Installing       : perl-Filter-2:1.58-2.el8.x86_64                            12/104
Installing       : perl-Compress-Raw-Zlib-2.081-1.el8.x86_64                  13/104
Installing       : perl-encoding-4:2.22-3.el8.x86_64                          14/104
Installing       : perl-Text-Balanced-2.03-395.el8.noarch                     15/104
Installing       : perl-Net-Ping-2.55-416.el8.noarch                          16/104
Installing       : perl-Math-Complex-1.59-416.el8.noarch                      17/104
Installing       : perl-Math-BigInt-1:1.9998.11-5.el8.noarch                  18/104
Installing       : perl-JSON-PP-1:2.97.001-3.el8.noarch                       19/104
Installing       : perl-Math-BigRat-0.2614-1.el8.noarch                       20/104
Installing       : perl-Sub-Install-0.928-14.el8.noarch                       21/104
Installing       : perl-Pod-Html-1.22.02-416.el8.noarch                       22/104
Installing       : perl-Params-Util-1.07-22.el8.x86_64                        23/104
Installing       : perl-Locale-Maketext-1.28-396.el8.noarch                   24/104
Installing       : perl-Locale-Maketext-Simple-1:0.21-416.el8.noarch          25/104
Installing       : perl-Params-Check-1:0.38-395.el8.noarch                    26/104
Installing       : perl-Module-Load-Conditional-0.68-395.el8.noarch           27/104
Installing       : perl-ExtUtils-Command-1:7.34-1.el8.noarch                  28/104
Installing       : perl-Digest-SHA-1:6.02-1.el8.x86_64                        29/104
Installing       : perl-Compress-Raw-Bzip2-2.081-1.el8.x86_64                 30/104
Installing       : perl-IO-Compress-2.081-1.el8.noarch                        31/104
Installing       : perl-IO-Zlib-1:1.10-416.el8.noarch                         32/104
Installing       : perl-CPAN-Meta-YAML-0.018-397.el8.noarch                   33/104
Installing       : perl-CPAN-Meta-2.150010-396.el8.noarch                     34/104
Installing       : perl-Data-OptList-0.110-6.el8.noarch                       35/104
Installing       : perl-bignum-0.49-2.el8.noarch                              36/104
Installing       : perl-Math-BigInt-FastCalc-0.500.600-6.el8.x86_64           37/104
Installing       : perl-Filter-Simple-0.94-2.el8.noarch                       38/104
Installing       : perl-open-1.11-416.el8.noarch                              39/104
Installing       : perl-Archive-Zip-1.60-3.el8.noarch                         40/104
Installing       : perl-Devel-SelfStubber-1.06-416.el8.noarch                 41/104
Installing       : perl-Module-CoreList-tools-1:5.20181130-1.el8.noarch       42/104
Installing       : perl-experimental-0.019-2.el8.noarch                       43/104
Installing       : zlib-devel-1.2.11-10.el8.x86_64                            44/104
Installing       : python3-pyparsing-2.1.10-7.el8.noarch                      45/104
Installing       : systemtap-sdt-devel-4.0-7.el8.x86_64                       46/104
Installing       : make-1:4.2.1-9.el8.x86_64                                  47/104
Running scriptlet: make-1:4.2.1-9.el8.x86_64                                  47/104
Installing       : perl-utils-5.26.3-416.el8.noarch                           48/104
Installing       : perl-perlfaq-5.20180605-1.el8.noarch                       49/104
Installing       : perl-local-lib-2.000024-2.el8.noarch                       50/104
Installing       : perl-Unicode-Collate-1.25-2.el8.x86_64                     51/104
Installing       : perl-Time-Piece-1.31-416.el8.x86_64                        52/104
Installing       : perl-Thread-Queue-3.13-1.el8.noarch                        53/104
Installing       : perl-Text-Template-1.51-1.el8.noarch                       54/104
Installing       : perl-Text-Glob-0.11-4.el8.noarch                           55/104
Installing       : perl-Test-Simple-1:1.302135-1.el8.noarch                   56/104
Installing       : perl-Test-1.30-416.el8.noarch                              57/104
Installing       : perl-Sys-Syslog-0.35-397.el8.x86_64                        58/104
Installing       : perl-Pod-Parser-1.63-396.el8.noarch                        59/104
Installing       : perl-Pod-Checker-4:1.73-395.el8.noarch                     60/104
Installing       : perl-PerlIO-via-QuotedPrint-0.08-395.el8.noarch            61/104
Installing       : perl-Package-Generator-1.106-11.el8.noarch                 62/104
Installing       : perl-Sub-Exporter-0.987-15.el8.noarch                      63/104
Installing       : perl-Module-Loaded-1:0.08-416.el8.noarch                   64/104
Installing       : perl-Memoize-1.03-416.el8.noarch                           65/104
Installing       : perl-MRO-Compat-0.13-4.el8.noarch                          66/104
Installing       : perl-Data-Section-0.200007-3.el8.noarch                    67/104
Installing       : perl-Software-License-0.103013-2.el8.noarch                68/104
Installing       : perl-Locale-Codes-3.57-1.el8.noarch                        69/104
Installing       : perl-IPC-System-Simple-1.25-17.el8.noarch                  70/104
Installing       : perl-autodie-2.29-396.el8.noarch                           71/104
Installing       : perl-IPC-SysV-2.07-397.el8.x86_64                          72/104
Installing       : perl-File-Which-1.22-2.el8.noarch                          73/104
Installing       : perl-File-HomeDir-1.002-4.el8.noarch                       74/104
Installing       : perl-ExtUtils-MM-Utils-1:7.34-1.el8.noarch                 75/104
Installing       : perl-IPC-Cmd-2:1.02-1.el8.noarch                           76/104
Installing       : perl-File-Fetch-0.56-2.el8.noarch                          77/104
Installing       : perl-Env-1.04-395.el8.noarch                               78/104
Installing       : perl-Encode-Locale-1.05-9.el8.noarch                       79/104
Installing       : perl-devel-4:5.26.3-416.el8.x86_64                         80/104
Installing       : perl-ExtUtils-Install-2.14-4.el8.noarch                    81/104
Installing       : perl-ExtUtils-MakeMaker-1:7.34-1.el8.noarch                82/104
Installing       : perl-ExtUtils-CBuilder-1:0.280230-2.el8.noarch             83/104
Installing       : perl-ExtUtils-Embed-1.34-416.el8.noarch                    84/104
Installing       : perl-ExtUtils-Miniperl-1.06-416.el8.noarch                 85/104
Installing       : perl-libnetcfg-4:5.26.3-416.el8.noarch                     86/104
Installing       : perl-inc-latest-2:0.500-9.el8.noarch                       87/104
Installing       : perl-Module-Build-2:0.42.24-5.el8.noarch                   88/104
Installing       : perl-Encode-devel-4:2.97-3.el8.x86_64                      89/104
Installing       : perl-Devel-Size-0.81-2.el8.x86_64                          90/104
Installing       : perl-Devel-Peek-1.26-416.el8.x86_64                        91/104
Installing       : perl-Devel-PPPort-3.36-5.el8.x86_64                        92/104
Installing       : perl-DB_File-1.842-1.el8.x86_64                            93/104
Installing       : perl-Config-Perl-V-0.30-1.el8.noarch                       94/104
Installing       : perl-Compress-Bzip2-2.26-6.el8.x86_64                      95/104
Installing       : perl-B-Debug-1.26-2.el8.noarch                             96/104
Installing       : perl-Attribute-Handlers-0.99-416.el8.noarch                97/104
Installing       : perl-Algorithm-Diff-1.1903-9.el8.noarch                    98/104
Installing       : perl-Text-Diff-1.45-2.el8.noarch                           99/104
Installing       : perl-Archive-Tar-2.30-1.el8.noarch                        100/104
Installing       : perl-CPAN-2.18-397.el8.noarch                             101/104
Installing       : perl-4:5.26.3-416.el8.x86_64                              102/104
Installing       : elfutils-libelf-devel-0.174-6.el8.x86_64                  103/104
Installing       : kernel-devel-4.18.0-80.11.2.el8_0.x86_64                  104/104
Running scriptlet: kernel-devel-4.18.0-80.11.2.el8_0.x86_64                  104/104
Verifying        : perl-4:5.26.3-416.el8.x86_64                                1/104
Verifying        : perl-Algorithm-Diff-1.1903-9.el8.noarch                     2/104
Verifying        : perl-Archive-Tar-2.30-1.el8.noarch                          3/104
Verifying        : perl-Archive-Zip-1.60-3.el8.noarch                          4/104
Verifying        : perl-Attribute-Handlers-0.99-416.el8.noarch                 5/104
Verifying        : perl-B-Debug-1.26-2.el8.noarch                              6/104
Verifying        : perl-CPAN-2.18-397.el8.noarch                               7/104
Verifying        : perl-CPAN-Meta-2.150010-396.el8.noarch                      8/104
Verifying        : perl-CPAN-Meta-Requirements-2.140-396.el8.noarch            9/104
Verifying        : perl-CPAN-Meta-YAML-0.018-397.el8.noarch                   10/104
Verifying        : perl-Compress-Bzip2-2.26-6.el8.x86_64                      11/104
Verifying        : perl-Compress-Raw-Bzip2-2.081-1.el8.x86_64                 12/104
Verifying        : perl-Compress-Raw-Zlib-2.081-1.el8.x86_64                  13/104
Verifying        : perl-Config-Perl-V-0.30-1.el8.noarch                       14/104
Verifying        : perl-DB_File-1.842-1.el8.x86_64                            15/104
Verifying        : perl-Data-OptList-0.110-6.el8.noarch                       16/104
Verifying        : perl-Data-Section-0.200007-3.el8.noarch                    17/104
Verifying        : perl-Devel-PPPort-3.36-5.el8.x86_64                        18/104
Verifying        : perl-Devel-Peek-1.26-416.el8.x86_64                        19/104
Verifying        : perl-Devel-SelfStubber-1.06-416.el8.noarch                 20/104
Verifying        : perl-Devel-Size-0.81-2.el8.x86_64                          21/104
Verifying        : perl-Digest-SHA-1:6.02-1.el8.x86_64                        22/104
Verifying        : perl-Encode-Locale-1.05-9.el8.noarch                       23/104
Verifying        : perl-Encode-devel-4:2.97-3.el8.x86_64                      24/104
Verifying        : perl-Env-1.04-395.el8.noarch                               25/104
Verifying        : perl-ExtUtils-CBuilder-1:0.280230-2.el8.noarch             26/104
Verifying        : perl-ExtUtils-Command-1:7.34-1.el8.noarch                  27/104
Verifying        : perl-ExtUtils-Embed-1.34-416.el8.noarch                    28/104
Verifying        : perl-ExtUtils-Install-2.14-4.el8.noarch                    29/104
Verifying        : perl-ExtUtils-MM-Utils-1:7.34-1.el8.noarch                 30/104
Verifying        : perl-ExtUtils-MakeMaker-1:7.34-1.el8.noarch                31/104
Verifying        : perl-ExtUtils-Manifest-1.70-395.el8.noarch                 32/104
Verifying        : perl-ExtUtils-Miniperl-1.06-416.el8.noarch                 33/104
Verifying        : perl-ExtUtils-ParseXS-1:3.35-2.el8.noarch                  34/104
Verifying        : perl-File-Fetch-0.56-2.el8.noarch                          35/104
Verifying        : perl-File-HomeDir-1.002-4.el8.noarch                       36/104
Verifying        : perl-File-Which-1.22-2.el8.noarch                          37/104
Verifying        : perl-Filter-2:1.58-2.el8.x86_64                            38/104
Verifying        : perl-Filter-Simple-0.94-2.el8.noarch                       39/104
Verifying        : perl-IO-Compress-2.081-1.el8.noarch                        40/104
Verifying        : perl-IO-Zlib-1:1.10-416.el8.noarch                         41/104
Verifying        : perl-IPC-Cmd-2:1.02-1.el8.noarch                           42/104
Verifying        : perl-IPC-SysV-2.07-397.el8.x86_64                          43/104
Verifying        : perl-IPC-System-Simple-1.25-17.el8.noarch                  44/104
Verifying        : perl-JSON-PP-1:2.97.001-3.el8.noarch                       45/104
Verifying        : perl-Locale-Codes-3.57-1.el8.noarch                        46/104
Verifying        : perl-Locale-Maketext-1.28-396.el8.noarch                   47/104
Verifying        : perl-Locale-Maketext-Simple-1:0.21-416.el8.noarch          48/104
Verifying        : perl-MRO-Compat-0.13-4.el8.noarch                          49/104
Verifying        : perl-Math-BigInt-FastCalc-0.500.600-6.el8.x86_64           50/104
Verifying        : perl-Math-BigRat-0.2614-1.el8.noarch                       51/104
Verifying        : perl-Memoize-1.03-416.el8.noarch                           52/104
Verifying        : perl-Module-Build-2:0.42.24-5.el8.noarch                   53/104
Verifying        : perl-Module-CoreList-1:5.20181130-1.el8.noarch             54/104
Verifying        : perl-Module-CoreList-tools-1:5.20181130-1.el8.noarch       55/104
Verifying        : perl-Module-Load-1:0.32-395.el8.noarch                     56/104
Verifying        : perl-Module-Load-Conditional-0.68-395.el8.noarch           57/104
Verifying        : perl-Module-Loaded-1:0.08-416.el8.noarch                   58/104
Verifying        : perl-Module-Metadata-1.000033-395.el8.noarch               59/104
Verifying        : perl-Net-Ping-2.55-416.el8.noarch                          60/104
Verifying        : perl-Package-Generator-1.106-11.el8.noarch                 61/104
Verifying        : perl-Params-Check-1:0.38-395.el8.noarch                    62/104
Verifying        : perl-Params-Util-1.07-22.el8.x86_64                        63/104
Verifying        : perl-Perl-OSType-1.010-396.el8.noarch                      64/104
Verifying        : perl-PerlIO-via-QuotedPrint-0.08-395.el8.noarch            65/104
Verifying        : perl-Pod-Checker-4:1.73-395.el8.noarch                     66/104
Verifying        : perl-Pod-Html-1.22.02-416.el8.noarch                       67/104
Verifying        : perl-Pod-Parser-1.63-396.el8.noarch                        68/104
Verifying        : perl-SelfLoader-1.23-416.el8.noarch                        69/104
Verifying        : perl-Software-License-0.103013-2.el8.noarch                70/104
Verifying        : perl-Sub-Exporter-0.987-15.el8.noarch                      71/104
Verifying        : perl-Sub-Install-0.928-14.el8.noarch                       72/104
Verifying        : perl-Sys-Syslog-0.35-397.el8.x86_64                        73/104
Verifying        : perl-Test-1.30-416.el8.noarch                              74/104
Verifying        : perl-Test-Harness-1:3.42-1.el8.noarch                      75/104
Verifying        : perl-Test-Simple-1:1.302135-1.el8.noarch                   76/104
Verifying        : perl-Text-Balanced-2.03-395.el8.noarch                     77/104
Verifying        : perl-Text-Diff-1.45-2.el8.noarch                           78/104
Verifying        : perl-Text-Glob-0.11-4.el8.noarch                           79/104
Verifying        : perl-Text-Template-1.51-1.el8.noarch                       80/104
Verifying        : perl-Thread-Queue-3.13-1.el8.noarch                        81/104
Verifying        : perl-Time-HiRes-1.9758-1.el8.x86_64                        82/104
Verifying        : perl-Time-Piece-1.31-416.el8.x86_64                        83/104
Verifying        : perl-Unicode-Collate-1.25-2.el8.x86_64                     84/104
Verifying        : perl-autodie-2.29-396.el8.noarch                           85/104
Verifying        : perl-bignum-0.49-2.el8.noarch                              86/104
Verifying        : perl-devel-4:5.26.3-416.el8.x86_64                         87/104
Verifying        : perl-encoding-4:2.22-3.el8.x86_64                          88/104
Verifying        : perl-experimental-0.019-2.el8.noarch                       89/104
Verifying        : perl-inc-latest-2:0.500-9.el8.noarch                       90/104
Verifying        : perl-libnetcfg-4:5.26.3-416.el8.noarch                     91/104
Verifying        : perl-local-lib-2.000024-2.el8.noarch                       92/104
Verifying        : perl-open-1.11-416.el8.noarch                              93/104
Verifying        : perl-perlfaq-5.20180605-1.el8.noarch                       94/104
Verifying        : perl-utils-5.26.3-416.el8.noarch                           95/104
Verifying        : perl-version-6:0.99.24-1.el8.x86_64                        96/104
Verifying        : systemtap-sdt-devel-4.0-7.el8.x86_64                       97/104
Verifying        : elfutils-libelf-devel-0.174-6.el8.x86_64                   98/104
Verifying        : kernel-devel-4.18.0-80.11.2.el8_0.x86_64                   99/104
Verifying        : make-1:4.2.1-9.el8.x86_64                                 100/104
Verifying        : perl-Math-BigInt-1:1.9998.11-5.el8.noarch                 101/104
Verifying        : perl-Math-Complex-1.59-416.el8.noarch                     102/104
Verifying        : python3-pyparsing-2.1.10-7.el8.noarch                     103/104
Verifying        : zlib-devel-1.2.11-10.el8.x86_64                           104/104

Installed:
perl-4:5.26.3-416.el8.x86_64
elfutils-libelf-devel-0.174-6.el8.x86_64
kernel-devel-4.18.0-80.11.2.el8_0.x86_64
make-1:4.2.1-9.el8.x86_64
perl-Encode-Locale-1.05-9.el8.noarch
perl-Algorithm-Diff-1.1903-9.el8.noarch
perl-Archive-Tar-2.30-1.el8.noarch
perl-Archive-Zip-1.60-3.el8.noarch
perl-Attribute-Handlers-0.99-416.el8.noarch
perl-B-Debug-1.26-2.el8.noarch
perl-CPAN-2.18-397.el8.noarch
perl-CPAN-Meta-2.150010-396.el8.noarch
perl-CPAN-Meta-Requirements-2.140-396.el8.noarch
perl-CPAN-Meta-YAML-0.018-397.el8.noarch
perl-Compress-Bzip2-2.26-6.el8.x86_64
perl-Compress-Raw-Bzip2-2.081-1.el8.x86_64
perl-Compress-Raw-Zlib-2.081-1.el8.x86_64
perl-Config-Perl-V-0.30-1.el8.noarch
perl-DB_File-1.842-1.el8.x86_64
perl-Data-OptList-0.110-6.el8.noarch
perl-Data-Section-0.200007-3.el8.noarch
perl-Devel-PPPort-3.36-5.el8.x86_64
perl-Devel-Peek-1.26-416.el8.x86_64
perl-Devel-SelfStubber-1.06-416.el8.noarch
perl-Devel-Size-0.81-2.el8.x86_64
perl-Digest-SHA-1:6.02-1.el8.x86_64
perl-Encode-devel-4:2.97-3.el8.x86_64
perl-Env-1.04-395.el8.noarch
perl-ExtUtils-CBuilder-1:0.280230-2.el8.noarch
perl-ExtUtils-Command-1:7.34-1.el8.noarch
perl-ExtUtils-Embed-1.34-416.el8.noarch
perl-ExtUtils-Install-2.14-4.el8.noarch
perl-ExtUtils-MM-Utils-1:7.34-1.el8.noarch
perl-ExtUtils-MakeMaker-1:7.34-1.el8.noarch
perl-ExtUtils-Manifest-1.70-395.el8.noarch
perl-ExtUtils-Miniperl-1.06-416.el8.noarch
perl-ExtUtils-ParseXS-1:3.35-2.el8.noarch
perl-File-Fetch-0.56-2.el8.noarch
perl-File-HomeDir-1.002-4.el8.noarch
perl-File-Which-1.22-2.el8.noarch
perl-Filter-2:1.58-2.el8.x86_64
perl-Filter-Simple-0.94-2.el8.noarch
perl-IO-Compress-2.081-1.el8.noarch
perl-IO-Zlib-1:1.10-416.el8.noarch
perl-IPC-Cmd-2:1.02-1.el8.noarch
perl-IPC-SysV-2.07-397.el8.x86_64
perl-IPC-System-Simple-1.25-17.el8.noarch
perl-JSON-PP-1:2.97.001-3.el8.noarch
perl-Locale-Codes-3.57-1.el8.noarch
perl-Locale-Maketext-1.28-396.el8.noarch
perl-Locale-Maketext-Simple-1:0.21-416.el8.noarch
perl-MRO-Compat-0.13-4.el8.noarch
perl-Math-BigInt-FastCalc-0.500.600-6.el8.x86_64
perl-Math-BigRat-0.2614-1.el8.noarch
perl-Memoize-1.03-416.el8.noarch
perl-Module-Build-2:0.42.24-5.el8.noarch
perl-Module-CoreList-1:5.20181130-1.el8.noarch
perl-Module-CoreList-tools-1:5.20181130-1.el8.noarch
perl-Module-Load-1:0.32-395.el8.noarch
perl-Module-Load-Conditional-0.68-395.el8.noarch
perl-Module-Loaded-1:0.08-416.el8.noarch
perl-Module-Metadata-1.000033-395.el8.noarch
perl-Net-Ping-2.55-416.el8.noarch
perl-Package-Generator-1.106-11.el8.noarch
perl-Params-Check-1:0.38-395.el8.noarch
perl-Params-Util-1.07-22.el8.x86_64
perl-Perl-OSType-1.010-396.el8.noarch
perl-PerlIO-via-QuotedPrint-0.08-395.el8.noarch
perl-Pod-Checker-4:1.73-395.el8.noarch
perl-Pod-Html-1.22.02-416.el8.noarch
perl-Pod-Parser-1.63-396.el8.noarch
perl-SelfLoader-1.23-416.el8.noarch
perl-Software-License-0.103013-2.el8.noarch
perl-Sub-Exporter-0.987-15.el8.noarch
perl-Sub-Install-0.928-14.el8.noarch
perl-Sys-Syslog-0.35-397.el8.x86_64
perl-Test-1.30-416.el8.noarch
perl-Test-Harness-1:3.42-1.el8.noarch
perl-Test-Simple-1:1.302135-1.el8.noarch
perl-Text-Balanced-2.03-395.el8.noarch
perl-Text-Diff-1.45-2.el8.noarch
perl-Text-Glob-0.11-4.el8.noarch
perl-Text-Template-1.51-1.el8.noarch
perl-Thread-Queue-3.13-1.el8.noarch
perl-Time-HiRes-1.9758-1.el8.x86_64
perl-Time-Piece-1.31-416.el8.x86_64
perl-Unicode-Collate-1.25-2.el8.x86_64
perl-autodie-2.29-396.el8.noarch
perl-bignum-0.49-2.el8.noarch
perl-devel-4:5.26.3-416.el8.x86_64
perl-encoding-4:2.22-3.el8.x86_64
perl-experimental-0.019-2.el8.noarch
perl-inc-latest-2:0.500-9.el8.noarch
perl-libnetcfg-4:5.26.3-416.el8.noarch
perl-local-lib-2.000024-2.el8.noarch
perl-open-1.11-416.el8.noarch
perl-perlfaq-5.20180605-1.el8.noarch
perl-utils-5.26.3-416.el8.noarch
perl-version-6:0.99.24-1.el8.x86_64
systemtap-sdt-devel-4.0-7.el8.x86_64
perl-Math-BigInt-1:1.9998.11-5.el8.noarch
perl-Math-Complex-1.59-416.el8.noarch
python3-pyparsing-2.1.10-7.el8.noarch
zlib-devel-1.2.11-10.el8.x86_64

Complete!

Where the ultra-wealthy live.

2019-09-30T10:18:00.000-05:00

Honk Kong is home to the highest number of ultra-wealthy adults -- those with net worth of more than $30m -- relative to its population.

Globally, there were over 265,000 ultra-rich in 2018, 30 per cent of them in the US.

Source: Wealth-X

The rise and fall of the dollar

2019-09-26T17:47:00.000-05:00

Installation of OpenWRT on Linksys EA4500 / N900 v1

2019-08-14T23:20:00.000-05:00

Installation of OpenWRT on Linksys EA4500 / N900

1.- It looks like this is very important and you must not skip it!!!!
Download/install last oficial firmware by Linksys
Ver. 2.1.42 (Build 183584)
Latest Date: 9/19/2017
Download 22.6 MB

From here: http://downloads.linksys.com/downloads/firmware/FW_EA4500_2.1.42.183584_prod.img

Perform the "upgrade"

2.- After the reboot, perform the install of OpenWRT. I'm not sure but my attempts to install the very latest firmware failed, so I used the version mention on this chatroom:

https://forum.archive.openwrt.org/viewtopic.php?id=60649&p=1#p304557

Post #21:
Edit: that image you're running now might be old enough that you should flash the factory firmware first, then flash with https://downloads.openwrt.org/snapshots … actory.bin .

The board name changed from ea4500 to linksys-viper, which will prevent sysupgrade from accepting the .tar image.

Link to the file: https://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/openwrt-kirkwood-linksys-viper-squashfs-factory.bin

Wait for the reboot, ping the router and when you get answer open an ssh session:

3.- ssh root@192.168.1.1
Warning: Permanently added '192.168.1.1' (RSA) to the list of known hosts.

BusyBox v1.24.2 () built-in shell (ash)

_______ ________ __

| | .-------.------.-----. | | | | .----. | |_

| - | | _ | -__| | | | | | | _| | _|

|_______ | | __|____|__|__| |________| |__| |____|

|__| W I R E L E S S F R E E D O M

-----------------------------------------------------

DESIGNATED DRIVER (Bleeding Edge, 50072)

-----------------------------------------------------
* 2 oz. Orange Juice Combine all juices in a
* 2 oz. Pineapple Juice tall glass filled with
* 2 oz. Grapefruit Juice ice, stir well.
* 2 oz. Cranberry Juice
-----------------------------------------------------
root@OpenWrt:~#

Assign a password to "root" account:

root@OpenWrt:~# passwd root
Changing password for root
New password:
Retype password:
Password for root changed by root

4.- Connect the router to your internet connection and upgrade the packages as explained on
https://openwrt.org/docs/guide-user/luci/luci.essentials

root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_base.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/kernel/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_kernel.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/kernel/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/telephony/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_telephony.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/telephony/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_packages.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/packages/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_routing.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/routing/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_luci.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_management.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/management/Packages.sig.
Signature check passed.

5.- Now install "luci" with SSL

root@OpenWrt:~# opkg install luci-ssl-openssl
Installing luci-ssl-openssl (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-ssl-openssl_git-17.339.51318-de4c4b8-1_all.ipk.
Installing luci (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci_git-17.339.51318-de4c4b8-1_all.ipk.
Installing uhttpd (2016-10-05-fe01ef3f52adae9da38ef47926cd50974af5d6b7) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/uhttpd_2016-10-05-fe01ef3f52adae9da38ef47926cd50974af5d6b7_kirkwood.ipk.
Installing uhttpd-mod-ubus (2016-10-05-fe01ef3f52adae9da38ef47926cd50974af5d6b7) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/uhttpd-mod-ubus_2016-10-05-fe01ef3f52adae9da38ef47926cd50974af5d6b7_kirkwood.ipk.
Installing luci-mod-admin-full (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-mod-admin-full_git-17.339.51318-de4c4b8-1_kirkwood.ipk.
Installing luci-base (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-base_git-17.339.51318-de4c4b8-1_kirkwood.ipk.
Installing lua (5.1.5-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/lua_5.1.5-1_kirkwood.ipk.
Installing liblua (5.1.5-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/liblua_5.1.5-1_kirkwood.ipk.
Installing libuci-lua (2016-07-04.1-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/libuci-lua_2016-07-04.1-1_kirkwood.ipk.
Installing luci-lib-nixio (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-lib-nixio_git-17.339.51318-de4c4b8-1_kirkwood.ipk.
Installing luci-lib-ip (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-lib-ip_git-17.339.51318-de4c4b8-1_kirkwood.ipk.
Installing rpcd (2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/rpcd_2016-06-30-23417e94d25570e6d62542bac46edd51e8e0243a_kirkwood.ipk.
Installing libubus-lua (2016-07-02-053be7df871e05478284235732f8b0608089512f) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/libubus-lua_2016-07-02-053be7df871e05478284235732f8b0608089512f_kirkwood.ipk.
Installing luci-lib-jsonc (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-lib-jsonc_git-17.339.51318-de4c4b8-1_kirkwood.ipk.
Installing luci-theme-bootstrap (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-theme-bootstrap_git-17.339.51318-de4c4b8-1_all.ipk.
Installing luci-app-firewall (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-app-firewall_git-17.339.51318-de4c4b8-1_all.ipk.
Installing luci-proto-ppp (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-proto-ppp_git-17.339.51318-de4c4b8-1_all.ipk.
Installing libiwinfo-lua (2016-01-25-e4aca3910dff532ed878d0ceaf1ab6e8ad7719bf) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/libiwinfo-lua_2016-01-25-e4aca3910dff532ed878d0ceaf1ab6e8ad7719bf_kirkwood.ipk.
Installing luci-proto-ipv6 (git-17.339.51318-de4c4b8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/luci-proto-ipv6_git-17.339.51318-de4c4b8-1_all.ipk.
Installing rpcd-mod-rrdns (20170710) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/rpcd-mod-rrdns_20170710_kirkwood.ipk.
Installing libustream-openssl (2016-07-02-ec80adaa1b47f28d426fa19c692011ce60b992d6) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/libustream-openssl_2016-07-02-ec80adaa1b47f28d426fa19c692011ce60b992d6_kirkwood.ipk.
Installing libopenssl (1.0.2m-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/libopenssl_1.0.2m-1_kirkwood.ipk.
Installing zlib (1.2.8-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/zlib_1.2.8-1_kirkwood.ipk.
Installing openssl-util (1.0.2m-1) to root...
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/openssl-util_1.0.2m-1_kirkwood.ipk.
Configuring liblua.
Configuring libuci-lua.
Configuring rpcd.
Configuring luci-lib-ip.
Configuring libubus-lua.
Configuring libiwinfo-lua.
Configuring zlib.
Configuring libopenssl.
Configuring openssl-util.
Configuring luci-theme-bootstrap.
//usr/lib/opkg/info/luci-theme-bootstrap.postinst: .: line 130: can't open './30_luci-theme-bootstrap'
//usr/lib/opkg/info/luci-theme-bootstrap.postinst: .: line 130: can't open './30_luci-theme-bootstrap'
Configuring libustream-openssl.
Configuring uhttpd.
4+0 records in
4+0 records out
Generating a 2048 bit RSA private key
.........................................................+++
.............................................................................+++
writing new private key to '/etc/uhttpd.key.new'
-----
Configuring uhttpd-mod-ubus.
//usr/lib/opkg/info/uhttpd-mod-ubus.postinst: .: line 130: can't open './00_uhttpd_ubus'
Configuring lua.
Configuring luci-lib-nixio.
Configuring luci-lib-jsonc.
Configuring luci-base.
Configuring luci-mod-admin-full.
//usr/lib/opkg/info/luci-mod-admin-full.postinst: .: line 130: can't open './50_luci-mod-admin-full'
//usr/lib/opkg/info/luci-mod-admin-full.postinst: .: line 130: can't open './50_luci-mod-admin-full'
Configuring luci-app-firewall.
Configuring luci-proto-ppp.
Configuring luci-proto-ipv6.
Configuring rpcd-mod-rrdns.
Configuring luci.
Configuring luci-ssl-openssl.

6.- Additional web applications
Search and install luci-app-* packages if you want to configure services via LuCI.

root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_base.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/base/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/kernel/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_kernel.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/kernel/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/telephony/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_telephony.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/telephony/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/packages/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_packages.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/packages/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/routing/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_routing.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/routing/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_luci.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/luci/Packages.sig.
Signature check passed.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/management/Packages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_management.
Downloading http://downloads.openwrt.org/snapshots/trunk/kirkwood/generic/packages/management/Packages.sig.
Signature check passed.

root@OpenWrt:~# opkg list luci-app-\*
<> So I just went to the browser and opened a session to 192.168.1.1

If you would like to see some graphical examples you can go to this post.

For the rest of the configuration you can check this post too.