YES !!! There will always be fool to invent new things .......

know few things about iphone

2011-05-20T08:16:00.001-07:00

Eight rules of thumb for iPhone app development

1 Take advantage of learned behaviors
“Oh, this works just like the calendar”

2 Avoid interaction inconsistencies
“This is weird, cancel is usually over there”

3 Provide clear conceptual link across widgets
“This button must be related to that box, they’re next to each other”

4 Put space between action widgets
“Oh man, I didn’t mean to send that SMS!
”5 Plan for accidental overswiping
“I keep accidentally changing to a different screen”

6 Don't rely exclusively on multi-touch
“It’s hard to do this while I’m holding something in the other hand”

7 Provide visual feedback for taps
“Did I hit that button? I’m not sure.”

8 Provide interaction affordances
“It’s obvious that you’re supposed to swipe left-and-right.”

I PHONE 4

The iPhone 4 is a touchscreen smartphone developed by Apple. It is the fourth generation of iPhone, and successor to the iPhone 3GS. It is particularly marketed for video calling (marketed by Apple as Facetime, consumption of media such as books and periodicals, movies, music, and games, and for general web and e-mail access. It was announced on June 7, 2010, at the WWDC 2010 held at the Moscone Center, San Francisco,[6] and was released on June 24, 2010, in the United States, the United Kingdom, France, Germany and Japan.

The iPhone 4 runs Apple's iOS operating system, the same operating system as used on previous iPhones, the iPad, and the iPod Touch. It is primarily controlled by a user's fingertips on the multi-touch display, which is sensitive to fingertip contact.

The most noticeable difference between the iPhone 4 and its predecessors is the new design, which incorporates an uninsulated stainless steel frame that acts as the device's antenna. The internal components of the device are situated between two panels of chemically strengthened aluminosilicate glass.[7] It has an Apple A4 processor and 512 MB of eDRAM, twice that of its predecessor and four times that of the original iPhone. Its 3.5-inch (89 mm) LED backlit liquid crystal display with a 960×640 pixel resolution is marketed as the "Retina Display".

few facts about the adidas

2010-11-27T11:45:00.000-08:00

Adidas was founded by German native Adolf "Adi" Dassler, who made his first shoe in 1920. In 1925, he designed the first cleat prototype for soccer and track and field events. Since that time, the Adidas company has become world-renowned for its sports-related clothing items, which now include sneakers, shirts, gym bags and watches, just to name a few. The company's calling card is its three-stripe trademark that appears on all products.

Olympic Lineage
1. Dutch athletes wore shoes made by Adi Dassler during the 1928 Olympic Games in Amsterdam, the Netherlands, the first time Olympic athletes wore them to compete. In 1932, German runner Arthur Jonath became the first Olympic competitor to win a medal while wearing Dassler shoes.
'Seinfeld' connection
2. Businessman Robert Louis-Dreyfus was named president of the company in 1993 and proceeded to implement new marketing campaigns that boosted sluggish sales. He's the cousin of actress Julia Louis-Dreyfus of "Seinfeld" fame. He died on July 4, 2009, at the age of 63.
Reebok Acquisition
3. With permission from the European Commission, Adidas acquired rival sportswear maker Reebok for an estimated $3.8 billion in early 2006. Combined, the two entities represented almost $12 billion in revenue at the time.
Fun Fact
4. Hip hop group Run DMC recorded the song "My Adidas" for the album "Raising Hell," which was released in 1986. Sample lyrics include the line "Now the Adidas I possess for one man is rare, myself, homeboy, got 50 pair."
Famous Ad Pitches
5. Celebrities who have endorsed Adidas products in ads include tennis players Arthur Ashe and Anna Kournikova, soccer star David Beckham and basketball star Kobe Bryant.

Read more: Interesting Facts About Adidas | eHow.com http://www.ehow.com/facts_5459889_interesting-adidas.html#ixzz16VvMQBgQ

know how the online marketing will give you money on advertisement

2010-09-01T04:28:00.000-07:00

Basic Mathematics for Internet Advertising

I used to do consulting work in the past, and most of my clients had trouble understanding the mathematics behind Internet advertising models. I figured it could be useful to explain some of the basic formulas around.

Calculating The CPM

CPM stands for cost-per-mille. Mille is the latin word for thousand, so CPM means cost per thousand. In this case we are talking about thousands of impressions on a website (also called page views). This is one of the most used metrics on the web. Under this model you’ll have an advertiser who is willing to play a certain price for each lot of one thousand impressions his banner will get on the publisher’s website. CPM numbers vary from $0.1 up to $20 or more, depending on the size of the banner, placement, authority of the website displaying the banner and so on.

Basic formula:

Let’s suppose that you created an account with an ad network that offers a $3 CPM for 300×250 banners displayed above the fold. If you put that banner on your site, and it generates 120,000 page views during that month, the ad network will pay you $3 x 120,000 / 1,000.

How much you earn = CPM x (Total Impressions / 1,000)

We must divide the total number of impressions by 1,000 because the CPM puts a price on lots of thousand impressions. So we are basically doing $3 x 120, which is equal to $360.

Reversing the formula:

It is also useful to be able to reverse that formula. Let’s suppose that you sell 125×125 banners on your sidebar, and that you charge a flat fee of $150 monthly for each. Your blog generates 200,000 impressions monthly. Then one day a potential advertiser asks what CPM your advertising spots cost more or less. What would you reply?

CPM = Flat rate per month / (Total Impressions / 1,000)

It is simple, just remember that CPM stands for “cost-per-mille” (or “cost-per-thousand”), so you need to divide the cost ($150) by the number of thousand impressions you get (200). That would be $150 divided by 200, so the effective CPM on your 125×125 banners would be $0.75.

Calculating the CPC

CPC stands for cost-per-click. This is another very popular advertising model around the web, especially because that is what Google uses on its AdWords/AdSense platform. Under this model the advertiser will pay a certain amount for each click he will receive from the publisher (or from search portals). The actual cost per click can vary from $0.01 up to $50 or more, depending on the keyword in question, the niche, and on where the click is coming from.

The basic formula:

Calculating how much you should get as a publisher is very easy.
How much you earn = CPC x Total number of clicks

If the average CPC you are getting on your website is $0.09, and you generate 1,300 clicks per month, you’ll be making $0.09 x 1,300 monthly, which is equal to $117.

Reversing the formula:

Reversing the CPC formula is almost as simple. Again let’s suppose that you sell banners directly on your website. The 728×90 leaderboard on the header costs $1,000, and usually that banner spot gets 3,700 clicks per month. One day an advertiser asks you the average CPC of your 728×90 banner. What would you tell him?

CPC = Flat rate per month / Total number of clicks

Again, remember it is “cost-per-click.” You’ll just need to divide the cost ($1,000) by the average number of clicks (3,700). That would be $1,000 divided by 3,700, so the average CPC on that spot is $0.27.

Notice that calculating the numbers for advertising models such as CPA (cost-per-action), CPL (cost-per-lead) and CPS (cost-per-sale) is pretty much the same thing. You’ll just need to substitute the number of clicks by the number of actions, leads or sales.

Calculating the Conversion Rate

Conversion rate is another very important metric, because it is directly related with the bottom line. It basically tells you what percentage of the people clicking through an ad ended up taking the desired action (which could be to purchase the product, or simply to sign-up for a newsletter). You can also track the conversion rate of a landing page, disregarding the source of the visitors. In other words, what percentage of the people visiting that page are taking the desired action there?

The basic formula:

Calculating the conversion rate is not difficult. You just need to divide the number of people who took the desired action by the total number of people who clicked on the ad.
Conversion rate:

(Number of people who took action / Total number of people who clicked on the ad) x 100

For example, let’s suppose that your purchased 1,000 clicks on Google AdWords, and out of those 35 people ended up purchasing your ebook. Your conversion rate on that campaign was 35 divided by 1,000, which is 0.035. After that we need to multiply the result by 100 to find the percentage. So 0.035 x 100 equals 3,5%.

Reversing the formula:

Reversing the conversion rate formula is particular useful for people who sell products online or for affiliate markets. Let’s suppose that you sell an ebook for $17, and that you want to drive traffic to your sales page using Google AdWords. How much should you pay for each click, however? The answer to that is what I call “the average value per visitor.”

Average value per visitor = (Conversion rate / 100) x Price of your product

You’ll basically need to multiply the conversion rate by the price of your book. Let’s suppose your conversion rate is 4%. So 4 / 100 equals 0.04, times $17 it is equal to $0.68. This is your average value per visitor. If you pay $0.68 per click, therefore, you’ll break even. If you manage to pay less than that, you’ll make a profit.

For example, if you managed to purchase 2,000 clicks for $0.50 you’ll make a profit of 2,000 x $0.18, which equals to $360. $0.18 is the difference between the average value per visitor on your site ($0.68) and the price you are paying to get each visitor there ($0.50).

Another way to calculate the profits is by finding out the total revenues and total costs. Since your conversion rate is 4%, out of the 2,000 clicks you bought 80 people ended up purchasing your ebook. So total revenues equal to 80 times $17, or $1,360. Now total costs were 2,000 clicks times $0.50 per click, which is equal to $1,000. Finally, if we subtract costs from revenues we get $1,360 minus $1,000, so profits equal to $360.

Making these calculations if you are an affiliate marketer instead of a product seller is exactly the same thing. You’ll just need to change the price of the product with the commission you get per sale. The interesting thing here is that affiliate networks will tell you the average conversion rate for each product, so you start with all the numbers on your hand.

Let’s suppose that a particular affiliate offer converts at 7%. The cost for that product is $39, and your commission is 20% per sale. This means that on each sale you deliver to the merchant you’ll get paid $7.8 ($39 x 0.2) by the affiliate network. With this numbers you already know how much you can spend per click that you’ll send to the product sales page. That is the conversion rate multiplied by your commission, so 0.07 x $7.8, which is equal to $0.54. As long as you can send visitors there for less than $0.54, therefore, you’ll be making a profit on that campaign.

Obviously conversion rates may vary with different traffic sources, time of the day and the like, so the formula is not perfect. Despite that, it is the best framework you have to take an analytical approach to Internet advertising.

fact about anti-oxidant

2010-08-31T13:20:00.000-07:00

Antioxidants occur naturally in many foods and are essential for our health. They include Vitamin C found in fruit and vegetables and vitamin E found in seeds and nuts.

Antioxidants, both natural and synthetic, are used by the food industry as food additives to help prolong the shelf life and appearance of many foodstuffs. This book is concerned with this type of antioxidant.

There are currently six ‘groups’ of antioxidants used as food additives. These are:

BHA, BHT, TBHQ (E319-E321)
Gallates (E310-E312)
Erythorbic Acid (E315-316)
4-Hexylresorcinol (E586)
Tocopherols (E306-E309)
Ascorbic Acid (E300-E302)

The antioxidants that have caused health problems, for some people, are primarily synthetic. The most problematic antioxidants appear to be BHA, BHT and TBHQ, with gallates (E310 Propyl gallate, E311 Octyl gallate, E312 Dodecyl gallate) in second place.

Tips before buying seasonal foods and fruits

2010-08-31T13:13:00.000-07:00

•Most home grown foods in season are still less expensive.
•For those concerned with environmental issues, food being in season can imply some locality as produce flown halfway across the world loses the context of season: Seasonal food in the supermarket is often grown in the UK and Europe and this means less environmental impact in their transportation.

•Anyone bored with a repetitive diet would benefit from choosing seasonal produce which opens up a world of variety rather than being restrictive. This can be seen when buying from organic, seasonal suppliers such as Organic Republic who sell wild and foraged produce amongst larger varieties of seasonal fruits and vegetables. Here it is possible to buy three or four different kinds of tomatoes along side sorrel, edible flowers, rocket and wild garlic; things we mostly never bother to eat any more.

•There is a difference in taste between a freshly plucked, warm sun ripened fruit and one picked when unripe and then consumed several weeks later. To quote celebrity chef Jamie Oliver's website, "It's a really good idea to buy food that's in season whenever you can. It tastes better and tends to be cheaper than food that's traveled thousands of miles to get to you."

Some fruits and vegetables we like to eat are never going to be seasonal: In the UK fruits like bananas, mangoes and pineapples have to be imported. Companies like Riverford work with specific farms abroad to import produce without flying it. In certain cases they claim that this can be less damaging to the environment than forcing produce under gas in the UK, as described on their website www.riverford.co.uk.

However, they also give the greater portion of the market to local British producers. This model enables a sustainable balance to be struck between eating mainly seasonal, local produce and still being able to have the trappings of modern life such as banana smoothies on a rainy January day. It seems to be an example where looking after local economies then helps people globally and would question the wisdom of giving away all power of choice to large supermarkets and corporations to manage global food logistics.

Food Canning Technology

2010-08-31T13:08:00.000-07:00

Pressure Canning vs. Boiling Water Bath

Food can be preserved by either pressure canning or boiling water bath canning. The type of food being canned determines which method should be used. For example, any type of meat or vegetable requires a pressure canner, because only the extremely high temperatures created by pressure canning will sterilize the jars and contents completely of the bacteria that can cause botulism. However, since tomatoes and fruits have a high acid content, they may be canned with a water bath canner. A pressure cooker may still be used on fruits and tomatoes, if desired; simply select a recipe that includes instructions for using the pressure cooker, rather than boiling water.

Since there are two methods of canning, there are also two types of canners. Which to select depends on what types of food are going to be canned. Dedicated cooks will often keep one of each, but that isn’t strictly necessary. After all, it is actually possible (though considerably less convenient) to do a boiling water bath in the sink, if it has been thoroughly cleaned and sterilized. Price is a consideration when selecting a canner as well. While a water bath canner is less expensive, most pressure canners can serve three purposes: pressure canning, pressure cooking, and boiling water canning.

html link

2010-07-27T12:45:00.000-07:00

hoe to creat computer virus

2010-07-16T08:47:00.000-07:00

Computer Virus Tutorial
A virus reproduces, usually without your permission or knowledge. In general terms they have an infection phase where they reproduce widely and an attack phase where they do whatever damage they are programmed to do (if any). There are a large number of virus types. A virus is a program that reproduces its own code by attaching itself to other executable files in such a way that the virus code is executed when the infected executable file is executed.

…
You could probably also say that the virus must do this without the permission or knowledge of the user, but that’s not a vital distinction for purposes of our discussion here. We are using a broad definition of “executable file” and “attach” here. An obvious example of an executable file would be a program (COM or EXE file) or an overlay or library file used by an EXE file. Less obvious, but just as critical, would be the macro portion of what you might generally consider to be a data file (e.g., a Microsoft Word document). It’s important to also realize that the system sectors on either a hard or floppy disk contain executable code that can be infected–even those on a data disk. More recently, scripts written for Internet Web sites and/or included in E-mail can also be executed and infected.
To attach might mean physically adding to the end of a file, inserting into the middle of a file, or simply placing a pointer to a different location on the disk somewhere where the virus can find it. Most viruses do their “job” by placing self-replicating code in other programs, so that when those other programs are executed, even more programs are “infected” with the self-replicating code. This self-replicating code, when triggered by some event, may do a potentially harmful act to your computer. Another way of looking at viruses is to consider them to be programs written to create copies of themselves. These programs attach these copies onto host programs (infecting these programs). When one of these hosts is executed, the virus code (which was attached to the host) executes, and links copies of itself to even more hosts. Similar to viruses, you can also find malicious code in Trojan Horses, worms, and logic bombs. Often the characteristics of both a virus and a worm can be found in the same beast; confusing the issue even further.
…

Website: www.coa.edu | Filesize: 590kb

racover easy way to recover lost files ...

2010-07-01T11:15:00.000-07:00

It can happen to anyone. all you users who need to reliably repair a cfg failure - spend a moment to look over the next few paragraphs. Unfortunately, some occasional problems are a fact of life with computers, whatever you do (or don't do), sooner or later you will run into windows glitches. Take a couple of minutes and scan this important information if you'd like to learn the best way to stop windows errors from bothering you.

Click here to repair a cfg failure now!

We all desire the convenience and reliability of a "healthy" computer which is clean of errors, but the sad truth is that this scenario seems to be a fantasy. Does the term 'windows registry' ring a bell? Windows' registry is a critical part in your windows os that from time to time can be responsible for many errors. Without having an intact registry system you'll have to get used to trouble running both software and various other devices as well as a variety of problems down the road. Indeed, repairing a problematic registry is a matter for professionals, but fortunately, there are several effective self-repair tools that provide safe, fast, and effective results. Usually, all you have to do is load some special scanning software onto your computer and it'll do the job in just a few minutes.

Over time your pc accumulates thousands of different registry settings for your software programs and hardware devices - "too much information" is often at the root of all the problems you're bothered with. It appears that these tools can be the solution for those who might not have the expertise, the time, or the money to manage these irritating troubles with windows. Beware of unknown or suspicious files - in addition to contaminating your pc with viruses, it's common that these malicious files will also corrupt your registry database.

Therefore, when you need to repair a cfg failure and get yourself some peace of mind, you should definitely try to reorganize your registry - you'll be glad you did! Perhaps you're thinking you might need to reformat your hard disk because of performance issues, reconditioning your registry system might be just what you need. As a rule of thumb, it is recommended to check the 'health' of windows registry on a regular basis - don't be caught off guard! While pcs are arguably much more stable in recent years, with so many advances in the field, it's still common (and still inconvenient) to have to deal with occasional difficulties. By the way, if you know of someone with similar problems, don't hesitate to pass along this article; i know they'll be grateful for the assistance.

how to crack win xp account

2010-06-07T10:52:00.000-07:00

“AT” Command
The “AT” command schedules the operating system to run programs automatically. For example, if you want the operating system to make a backup of a crucial file or if you want the operating system to update the dynamic DNS provider with the current IP address, “AT” is at your command. It is the windows equivalent to the *nix cron command. The loophole is who runs the program when it is time to execute it. The “SYSTEM” user runs the command instead of the original user. So, if you schedule the OS to run “cmd” in the next minute, you’ll get the console DOS prompt for the “SYSTEM” user.

1.Go to “Start Menu” then “Run”
2.Type in “cmd.exe”
3.In the command prompt type “at 4:25pm /interactive cmd.exe” replacing the time with the next minute.
4.When the new command prompt appears, type “net user username password” replacing “username” with your target user and “password” with the password combination that you want to set.

Screen Saver Variation
When it is time for Windows to display the screen saver, the SYSTEM runs the screensaver file (which is pretty much an *.exe file renamed *.src). If you replace the default screensaver file with the cmd.exe file, again, you will obtain access to the “SYSTEM” console.

1.Go to “Start Menu” then “Run”
2.Type in “cmd.exe”
3.Type “cd\”
4.Type “cd\windows\system32″
5.mkdir temphack
6.copy logon.scr temphack\logon.scr
7.copy cmd.exe temphack\cmd.exe
8.del logon.scr
9.rename cmd.exe logon.scr
10.exit
The next time the screen saver is supposed to run, the command prompt will display. Then you can type “net user username password” replacing “username” with your target user and “password” with the password combination that you want to set

hack your phone yourself

2010-05-14T22:38:00.000-07:00

.:: NOKIA ::.Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile Phones
(1) *3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced by approx. 5%
(2) #3370# Deactivate Enhanced Full Rate Codec (EFR) OR *3370# ( Favourite )
(3) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
5) *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type. ( Favourite )
(6) *#9999# Phones software version if *#0000# does not work.
(7) *#06# For checking the International Mobile Equipment Identity (IMEI Number). ( Favourite )
(8) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
(12) *#147# (vodafone) this lets you know who called you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting" status of your phone.
(18) *#61# Allows you to check the number that "On No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.
(20) *#67# Allows you to check the number that "On Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 & 3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.
24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair
(0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again. (Favourite )
(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the phone number entered.
(32) 12345 This is the default security code.

press and hold # Lets you switch between lines

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4

NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or * # 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #

NOKIA 3330

*#06# This will show your warranty details *#92702689#
*3370# Basically increases the quality of calling sound, but decreases battery length.
#3370# Deactivates the above
*#0000# Shows your software version
*#746025625#This shows if your phone will allow sim clock stoppage
*4370# Half Rate Codec activation. It will automatically restart
#4370# Half Rate Codec deactivation. It will automatically restart
Restore Factory Settings To do this simply use this code

*#7780# Manufacturer Info Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only) This will put your phone into programming mode, and you'll be
presented with the programming menu.

2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US.
12) Power down the phone and power it back on again ISDN Code To check the ISDN number on your Nokia use this code *#92772689#.::

Ericsson

Ericson T65

*#05# Fake Insert puk screen Press no to exit

Ericsson T20
MENU tecnichal Info
[type] >*<<*<*
Displays :

1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup

2] Service setup
1] Contrast

3]Service Test
1] Display
2]Leds
3]Keyboard

4] ringer

5] Vibration

6]Headset

7] Microphone

8]Clock

4] Names List
MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK

EricssonT28

>*<<*<* menu Tecnichal info SW vers. and name list >*<<**< menu Personal Info Network and Subnetwork : NCK and NSCK < and > are the right and left menu's keysEricsson T18s/T10/A1018s
>*<<*<* software CXC125065 Internal product code PRG 970715 1515 Software version and SW rev.<* CLR <><**>*<<*<*> Displays texts and messages in the phone It will be displayed " TEXT " then push YES < and > are the right and left menu's keys !!!><** Control /Enable SIM Lock!!!
Ericsson R310 Technical Info : >*<<*<*Options :

1) service Info info Software Simlock Configuration

2) Service Test Display Led/Illumination Keyboard ringer Vibration Headset Microphone Clock

3)Text's name List Info personal : >*<<**< SIM Locking ( 8 digits' code ) ( it could harm your phone )

1) Network

2) Subnetwork

3) SP

4) Corporate

.:: Siemens ::.

Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0 6 # and press LONG KEY Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1 begin_of_the_skype_highlighting + 1 2 0 2 2 2 4 3 1 2 1 end_of_the_skype_highlighting

.:: Bosch ::.

IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #

.::Alcatel::.

IMEI number: * # 0 6 #Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *

.:: Samsung ::.

Samsung SGH600/2100DB IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#::.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #

.:: Philips ::.
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.

.:: Panasonic ::.
Panasonic gd90 gd93
*#9999# SW - Type the code on switch on , during network seek-Vers. SW and production code Enable ringing and vibration contemporarily Enable vibration with # then increase volume with "tone menu "

Panasonic gd70
*#9999# SW - Type the code on switch on , during network seek-Vers. SW and production code Enable ringing and vibration contemporarily Enable vibration with # then increase volume with "tone menu "

.:: Acer ::.
Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes ! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
#363# (Invalid input) [ unknown ]

.:: Genie ::.
Genie DB *#06# IMEI.
*#2254*# Near Cell Mode.For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.

.:: NEC ::.
NEC db2000 *#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password # (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password # (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password # (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password # (send?) lock
#1110* password # (send?) unlock
[password] [nï¿½ 8 cifre]
( it could harm your phone )

.:: Trium ::.

Trium Geo/Geo @ - Astral - Cosmo -AriaEnter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage
Trium Galaxy
Push * and type 5806: Production date and SW version

.:: Telit ::.

Telit GM 810 MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s voltage and temperature

.:: Sagem ::.
Sagem MC959/940
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration

Sagem MC920
Select commands' menu and push *
Displays 5 new menus :
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )

.:: Sony ::.
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#

.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and vibration
Push * and type 4329 :enables/disables network monitor 1 (the same of MT35)
Push * and type 621342 :enables/disables network monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS :"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version

.:: Motorola ::.
Motorola V3688

IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK

.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever E-mail customer of the Internet network.The e-mail will be sent to the maximum of within an hour from the reception.The sended message will contain in luminosity the telephone number of the sender. In order for sending e-mail, send an SMS with this syntax (always separated by spaces):EMA name@domain text-of-your-email Example: in order to send an email to john@doe.com, do the following: EMA john@doe.com text-of-your-email if your phone cant print @ replace it with a ! EMA johon!doe.com text-of-your-email And then send this message to the folloving number: +39 338 8641732 begin_of_the_skype_highlighting +39 338 8641732 end_of_the_skype_highlighting

Free SMS Center numbers
From your telephone you can send SMS messages of 160 char. max. to another GSM phoneYour message will be sent through an SMS Center (usually the one that gave your provider) You pay a little fee depending of your provider, BUT YOU WILL HAVE TO PAY something In order for sending SMS without paying anything, you got to change your SMS Center number with these one +491722270300 begin_of_the_skype_highlighting +491722270300 end_of_the_skype_highlighting or +358405202999 begin_of_the_skype_highlighting +358405202999 end_of_the_skype_highlighting or 352021100003

Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment Identity) type: *#06# Information you get from the IMEI:
XXXXXX XX XXXXXX X TAC FAC SNR SP TAC = Type Approval Code (first 2 digits = country code).
FAC = Final Assembly Code (For Nokia phones FAC=10). SNR = Serial Number. SP = Spare (always SP=0).To check the phone's software (firmware revision information) type: *#0000# ( or for some phones outher then Nokia 61XX you can try *#model nummber# ex. for 8110 *#8110#) Information you can get from the phone's software version: V 3.14 28-11-97 NSE-3 1st line: Software version. 2nd line: The date of the software release.3nd line: Phone type, .Some versions and dates:V 3.14 28/11/97 V4.33 11/03/98 V 4.73 22/04/98 V 5.24 14/9/98

Pin-Out Diagram for the 6110

1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND

Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus can not be erased after the procedure. But it's not dangerous or harmful for your phone To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the display Now, menu 3-6 is now enabled! To enable the carkit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display and the menu 3-7 is enabled!!

This Trick is for you how want to hear more then your supposed to!

If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere stratidic and call your phone! The phone receives the call without ringing and you can listen to what people are talking about! .....gr8...

Serial numbers on your 6110
For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date 0298
Then there is the last Repair Date: ex. Repaired: 0000
Note: you must turn off the phone to exit after this test, because of the last function, "transfer user data" which Doesn't work as "standard"....You can use this mode only to transfer all Calender, Profile and Callers Group Information to another phone (eg. if you are replacing phone or configuring phones for use within your company or when a particular phone doesn't works correctly )

Activating and deactivating EFR and HFR, on your 6110

*3370# to activate Enhanced Full Rate - Makes calls sound better, but decreases the battery life by about 5%.#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call quality, but increases battery life by about 30%.
#4720# to deactivate Half Rate Mode

somthing about VOIP

2010-04-23T09:57:00.000-07:00

Voip voice over internet protocol , is a family of technologies that enables voice over application and telephone to be carried over an internet protocol (IP) network such as internet. These technologies include protocols, hardware and software standards, and computer programs. VoIP is employed in a telephony applications from analog phones to next –generation IP phones and wireless headsets and in desktop voice chat services from web-based party line chat service (like yahoo chat) to the well know Skype desktop voice calling services.
VoIP has become an important technology that is integrating pervasively into the popular culture. It is employed daily to drive new engines of commerce everything from business class VoIP –powered calling services to simple desktop chat tools such as Apples ichat . other high profile companies like ebay, Microsoft, google, and AT &T offer applications and services that utilize VoIP too.

codes for mobiles

2010-04-21T21:00:00.000-07:00

These codes will work on most Nokia Mobile Phones to activate/deactivate advanced hidden functions that you can’t change through the phone menu
One useful function that all Nokia’s I’ve owned have is “Cell Info Display” which can usually be found in the phones “Display settings” (eg: in a Nokia 1600) or “Phone Settings” (eg: in a Nokia 3315)
If your network supports it, when “Cell Info Display” is enabled, it will display the name of the base station your mobile is currently connected to on the screen eg: when i’m walking around the city it says “Sydney CBD” and when i’m at home it displays the name of my suburb.
Note:
To display “p” press “*” three times within one second, To display “w” press “*” four times within one second, To display “+” press twice “*” within less than a second
Code Function
*3370# / #3370# Activate / Deactivate Enhanced Full Rate Codec (EFR) – Your phone uses the best sound quality but talk time is reduced my approx. 5%
*#4720# / *#4720# Activate / Deactivate Half Rate Codec – Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#7220# / *#7230# Enable / Disable PCCCPH support (faster GPRS)
#pw+1234567890+1# Provider Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the “*” button to obtain the “p,w” and “+” symbols)
12345 This is the default security code
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
*#67705646# Removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature “SIM Clock Stop Allowed”, it means you will get the best standby time possible
press and hold # Lets you switch between lines
*#7760# Manufacturers code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays – 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
Instructions to Network Unlock Your Mobile
Once you have bought or found a network unlock code for your phone, thiswill give you step by step instructions to enter it into your:
Nokia 1100/2100/3100/3120/3200/3220/3315/6610i
Sony Ericcson A2618/T230/T610/T630/Z200/
Motorola T180/T190/T300/V171/V220
Panasonic GD35, Philips Savvy, Siemens A35/55/65, LG C1100
Nokia Error Messages
Code error – appears if the unlock password entered is incorrect. You need to go through the whole process again, ensuring you enter the correct 10-digit code.
SIM was not restricted – appears if the handset has not been locked to a network. You should be able to use any SIM card in this handset.
Not allowed – If the syntax while entering the unlock password is incorrect, nothing happens. If you have tried to unlock the phone 5 times with an incorrect password any further attempts to unlock the phone will generate this message. The phone will need to be electronically unlocked at a Nokia service centre.
Note: There are dozens of different nokia phones, some of the codes above work on some phones and not on others.
Please don’t post your phone’s IMEI number in a comment or email me for unlock codes as all the information I can offer has been given in this blog entry.
NOTE: There are many websites and applications which claim to generate unlocking codes for nokia phones for free, I don’t know if they work but you can certainly try them at your own risk:

now code your phone yourself

praogramming codes
Jul, 10 2000 - 08:38
(170-2213/4) NAM Programming

The 170-2213 and the 170-2214 are both the same telephone. The only
difference is where they are sold.

NOKIA 2170 SERIES CELLULAR TELEPHONE NAM PROGRAMMING INSTRUCTIONS

NOKIA 2170 cellular telephones are capable of supporting authentication.
To change the value of the A-Key, the programmer must use the Complete NAM
Programming Instructions presented lower on this sheet, or by following
the industry procedure identified in TSB-50. Use the complete NAM
programming Instructions when advanced programming options require
modifications to advanced programming parameters. The clear key can be
used to correct mistakes.

MENU DRIVEN EASY NAM PROGRAMMING FOR NOKIA 2170 HANDPORTABLES

#639# : 1. Turn on Phone and Enter Access Code.
*#639#

Phone : 2. Enter the 10 Digit Area Code and Phone Number and Press
Number the TALK Key (or the 'OK' softkey in display).

SID & : 3. Enter System ID Code (SID) Supplied by the Service
options Provider (1-5 Digit SID) and Press The TALK (or 'OK')
Key.

Optional Settings are Language and Lock Code (See below).

SAVE : 4. Press OK to Store new values.
CHANGES?

ACTIVATION : Programming is Completed.
OK
Phone Automatically Powers Off and Then Back On.

NOTE: Change the Lock code by adding a pound sign and new lock code after
the SID. (Example: 42#7788: Lock code = 7788).

Change the Language by adding a pound sign and new language code
after the code (Example: 42#2: Language = Spanish).

Language Code: 0 (default) = English. 1 = French and 2 = Spanish.

Change the Lock Code and Language code by separating each set of
numbers by a pound sign (Example: 42#7788#2: Where the SID = 0042,
Lock Code = 7788 and Language = Spanish).

COMPLETE NAM PROGRAMMING INSTRUCTIONS

ACCESS NAM PROGRAMMING MODE:

1. Turn the phone on. Enter the NAM access code. Factory default is
# 3 0 0 1 # 1 2 3 4 5 [Menu].

2. If this screen appears, you have entered NAM programming mode.
_________________
| Init lock |
| > NAM 1 |
| Change SPC |
|_________________|

Note: If this screen does not appear after several attempts, then the
access code has been changed and the phone must be returned to
the original purchase location for programming. Press the
[Select] softkey to modify the data to the right of the pointer.

MAIN MENU SELECTION

3. Press the [Arrow-Key] up or down until the indicator points at the
desired menu option.

NAM 1 Change SPC Security Emergency SW version
Serial No. Init lock

4. Press the [Select] softkey to access the Sub-Menu from any of the
above Main Menu selections. The chart below is a reference of the
available after highlighting NAM 1 and pressing the [Select] softkey.

PROGRAMMING NAM 1:

5. Press the [Arrow-Key] to scroll through the selected NAM list of
parameters. All available setting options are shown below.

6. To change the displayed value, press the [Select] softkey and use the
numeric keypad to make any changes.

NAM MENU Default Val. CDMA Default Val. DEFAULT Default Val.
SETTINGS SETTINGS

HOME 2 NETWORK CODE 0 DIRECTORY 0000000000
SYSTEM NUMBER
ID

OWN 0000000000 COUNTRY 310 NAM STATUS Enabled
NUMBER CODE

CDMA Sub-Menu ACCESS 1
SETTINGS METHOD

DEFAULT Sub-Menu LOCAL 1
SETTINGS OPTION

NETWORK 0 GROUP ID 10
ID
A-KEY CODE Dependent

7. Use the [OK] softkey to store the new information that has been
entered.

8. Repeat steps 6 through 8 for the remaining NAM parameter options to be
viewed and/or changed.

PROGRAMMING THE SECURITY CODE:

9. From the Main Menu, use the [Arrow-Key] to select the Security
Sub-Menu, press [Select] and the current 5-digit security code will
appear in the display. Default is 12345.

10. To change the Security Code, use the numeric keys to enter the new
value.

11. Press the softkey [OK] to store changes.

Note: Changing the Security Code automatically changes the Lock Code to
the last 4-digits of the new Security Code.

PROGRAMMING EMERGENCY NUMBERS: (Optional):

12. From the Main Menu use the Arrow-key to select the Emergency Sub-Menu,
press the [Select] softkey. Default values are:
EMERGENCY NUMBER 1 (911) / EMERGENCY NUMBER 2 (*911) / EMERGENCY
NUMBER 3 (None).

13. If you wish to change the default value shown above, use the
[Arrow-Key] to select the emergency number you wish to change and
press [Select]. Then use the numeric keys to enter the new values.

14. Press the [OK] softkey to save the value.

15. Press [QUIT] to avoid saving changes.

SERIAL NUMBER (ESN):

16. From the Main Menu, use the arrow-key to display the Electronic Serial
Number (ESN) of the phone.

17. Press [Quit] or [OK] to exit the menu.

A-KEY CODE: (Optional):

18. Press the [Select] softkey while the "A-Key Code" is displayed.

19. Enter the new A-Key and check sum that was calculated by the service
providers' security administrator.

20. Press [OK] to store the new a-Key value.

INIT LOCK:

The INIT LOCK feature is a functionality prohibiting electronic lock that
prevents the phone from being used. Its operation resembles the Automatic
Lock feature that is located in the Security Options menu of this product.
The difference is that once the INIT LOCK set to ON and then unlocked, the
phone remains unlocked indefinitely. This particular lock function is
designed to be enabled during NAM programming to support security during
its distribution to the end-customer. The code to unlock this feature is
only available from the Service Provider that holds the respective
subscription.

FIELD TEST:

The FIELD TEST MODE is used to investigate how the phone and cellular
system interact. The FIELD TEST information covers signal strength,
battery charging status, cellular state and encryption status. The
information is organized to display information relating to the air
interface with the network. Pressing ABC during an active display will
present acronyms in the display to identify the purpose of each data
field.

To activate the FIELD TEST mode the phone must be in NAM programming mode.
Instructions for entering NAM programming are shown above. Use the
following steps to enable the FIELD TEST mode.

I. From the Main Menu use the [Arrow-Key] to display the "FIELD TEST"
menu and press the [Select] soft key. Use the [Arrow-Key] to select
Enable and press the [OK] softkey.

II. Turn the 2170 off then back on. Once the power up self test is
completed, the FIELD TEST display will begin automatically. Scroll
through the different displays using the [Arrow-Key].

To disable the FIELD TEST mode. Return to NAM programming mode and
disable the function under the FIELD TEST menu.

EXITING NAM PROGRAMMING:

21. To exit the NAM programming mode, turn the phone off and leave it off
for five seconds. Then turn it back on.

every codes about mobiles phone (samsung)

2010-04-16T20:31:00.000-07:00

*#1111# S/W Version

*#1234# Firmware Version

*#2222# H/W Version

*#8999*8376263# All Versions Together

*#8999*8378# Test Menu

*#4777*8665# GPSR Tool

*#8999*523# LCD Brightness

*#8999*377# Error Menu

*#8999*327# EEP Menu

*#8999*3825523# Don't Know.

*#8999*667# Debug Mode

*#92782# PhoneModel (Wap)

#*5737425# JAVA Mode

*#2255# Call List

*#232337# Bluetooth MAC Adress

*#5282837# Java Version

#*4773# Incremental Redundancy

#*7752# 8 PSK uplink capability bit

#*7785# Reset wakeup & RTK timer cariables/variables

#*1200# ????

#*7200# Tone Generator Mute

#*3888# BLUETOOTH Test mode

#*#8999*324# ??

#*7828# Task screen

#*5111# ??

#*#8377466# S/W Version & H/W Version

#*2562# Restarts Phone

#*2565# No Blocking? General Defense.

#*3353# General Defense, Code Erased.

#*3837# Phone Hangs on White screen

#*3849# Restarts Phone

#*3851# Restarts Phone

#*3876# Restarts Phone

#*7222# Operation Typ: (Class C GSM)

#*7224# !!! ERROR !!!

#*7252# Operation Typ: (Class B GPRS)

#*7271# CMD: (Not Available)

#*7274# CMD: (Not Available)

#*7337# Restarts Phone (Resets Wap Settings)

#*2787# CRTP ON/OFF

#*2886# AutoAnswer ON/OFF

#*3737# L1 AFC

#*5133# L1 HO Data

#*7288# GPRS Detached/Attached

#*7287# GPRS Attached

#*7666# White Screen

#*7693# Sleep Deactivate/Activate

#*7284# L1 HO Data

#*2256# Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)

#*2286# Databattery

#*2527# GPRS switching set to (Class 4, 8, 9, 10)

#*2679# Copycat feature Activa/Deactivate

#*3940# External looptest 9600 bps

#*4263# Handsfree mode Activate/Deactivate

#*4700# Please use function 2637

#*7352# BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)

#*2558# Time ON

#*3370# Same as 4700

#*3941# External looptest 115200 bps

#*5176# L1 Sleep

#*7462# SIM Phase

#*7983# Voltage/Freq

#*7986# Voltage

#*8466# Old Time

#*2255# Call Failed

#*5187# L1C2G trace Activate/Deactivate

#*5376# DELETE ALL SMS!!!!

#*6837# Official Software Version: (0003000016000702)

#*7524# KCGPRS: (FF FF FF FF FF FF FF FF 07)

#*7562# LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)

#*2337# Permanent Registration Beep

#*2474# Charging Duration

#*2834# Audio Path (Handsfree)

#*3270# DCS Support Activate/Deactivate

#*3282# Data Activate/Deactivate

#*3476# EGSM Activate/Deactivate

#*3676# FORMAT FLASH VOLUME!!!

#*4760# GSM Activate/Deactivate

#*4864# White Screen

#*5171# L1P1

#*5172# L1P2

#*5173# L1P3

#*7326# Accessory

#*7683# Sleep variable

#*8465# Time in L1

#*2252# Current CAL

#*2836# AVDDSS Management Activate/Deactivate

#*3877# Dump of SPY trace

#*7728# RSAV

#*2677# Same as 4700

#*3797# Blinks 3D030300 in RED

#*3728# Time 2 Decod

#*3725# B4 last off

#*7372# Resetting the time to DPB variables

#*7732# Packet flow context bit Activate/Deactivate

#*6833# New uplink establishment Activate/Deactivate

#*3273# EGPRS multislot (Class 4, 8, 9, 10)

#*7722# RLC bitmap compression Activate/Deactivate

#*2351# Blinks 1347E201 in RED

#*4472# Hysteresis of serving cell: 3 dB

#*2775# Switch to 2 inner speaker

#*9270# Force WBS

#*7878# FirstStartup (0=NO, 1=YES)

#*3757# DSL UART speed set to (LOW, HIGH)

#*8726# Switches USBACM to Normal

#*8724# Switches USBACM to Generator mode

#*8727# Switches USBACM to Slink mode

#*8725# Switches USBACM to Loop-back mode

#*3838# Blinks 3D030300 in RED

#*2077# GPRS Switch

#*2027# GPRS Switch

#*0227# GPRS Switch

#*0277# GPRS Switch

#*22671# AMR REC START

#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# Pause REC

#*22674# Resume REC

#*22675# AMR Playback

#*22676# AMR Stop Play

#*22677# Pause Play

#*22678# Resume Play

#*77261# PCM Rec Req

#*77262# Stop PCM Rec

#*77263# PCM Playback

#*77264# PCM Stop Play

#*2872# CNT

*#8999*283# ???

#*22679# AMR Get Time

*288666# ???

*2886633# ???

*#8999*364# Watchdog ON/OFF

#*8370# Tfs4.0 Test 0

#*8371# Tfs4.0 Test 1

#*8372# Tfs4.0 Test 2

#*8373# Tfs4.0 Test 3

#*8374# Tfs4.0 Test 4

#*8375# Tfs4.0 Test 5

#*8376# Tfs4.0 Test 6

#*8377# Tfs4.0 Test 7

#*8378# Tfs4.0 Test 8

#*8379# Tfs4.0 Test 9

#837837# error=...

#*36245# Turns Email TestMenu on.

*2767*22236245# Email EPP set (....)!

*2767*837836245# Email Test Account!

*2767*29536245# Email Test2 Account!

*2767*036245# Email EPP reset!

*2767*136245# Email EPP set (1)!

*2767*736245# Email EPP set (7)!

*2767*3036245# Email...

*2767*3136245# Email...

*2767*3336245# Email...

*2767*3436245# Email...

*2767*3936245# Email...

*2767*4136245# Email...

*2767*4336245# Email...

*2767*4436245# Email...

*2767*4536245# Email...

*2767*4636245# Email...

*2767*4936245# Email...

*2767*6036245# Email...

*2767*6136245# Email...

*2767*6236245# Email...

*2767*6336245# Email...

*2767*6536245# Email...

*2767*6636245# Email...

*2767*8636245# Email...

*2767*85236245# Email...

*2767*3855# = E2P Full Reset

*2767*2878# = E2P Custom Reset

*2767*927# = E2P Wap Reset

*2767*226372# = E2P Camera Reset

*2767*688# Reset Mobile TV

#7263867# = RAM Dump (On or Off)

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

*#7465625# = Check the locks

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF

**********************

#*7878# FirstStartup (0=NO, 1=YES)

#*3838# Blinks 3D030300 in RED

#*2077# GPRS Switch

#*2027# GPRS Switch

#*0227# GPRS Switch

#*0277# GPRS Switch

#*22671# AMR REC START

#*22672# Stop AMR REC (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# Pause REC

#*22674# Resume REC

#*22675# AMR Playback

#*22676# AMR Stop Play

#*22677# Pause Play

#*22678# Resume Play

#*77261# PCM Rec Req

#*77262# Stop PCM Rec

#*77263# PCM Playback

#*77264# PCM Stop Play

#*22679# AMR Get Time

*#8999*364# Watchdog ON/OFF

*#8999*427# WATCHDOG signal route setup

*2767*3855# = Full Reset (Caution every stored data will be deleted.)

*2767*2878# = Custom Reset

*2767*927# = Wap Reset

*2767*226372# = Camera Reset (deletes photos)

*2767*688# Reset Mobile TV

#7263867# = RAM Dump (On or Off)

Samsung Secret Codes Part 3

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

*#7465625# = Check the phone lock status

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF

Type *#9998*627837793# Go to the 'my parameters' and there you will find new menu where you can unlock phone.(not tested-for samsung C100)

To unlock a Samsung turn the phone off take the sim card and type the following code *#pw+15853649247w# .

Java status code: #*53696# (Samsung X600)

If you want to unlock your phone put a sim from another company then type *#9998*3323# it will reset your phone. Push exit and then push 7, it will reset again. Put your other sim in and it will say sim lock, type in 00000000 then it should be unlocked. Type in *0141# then the green call batton and it's unlocked to all networks. This code may not work on the older phones and some of the newer phones. If it doesn't work you will have to reset your phone without a sim in it by typing *#2767*2878# or *#9998*3855# (not tested)

*2767*688# = Unlocking Code

*#8999*8378# = All in one Code

*#4777*8665# = GPSR Tool

*#8999*523# = LCD Brightness

*#8999*3825523# = External Display

*#8999*377# = Errors

#*5737425# = JAVA Something{I choose 2 and it chrashed}][/b]

*#2255# = Call List

#*536961# = Java Status Code

#*536962# = Java Status Code

#*536963# = Java Status Code

#*53696# = Java Status Code

#*1200# = AFC DAC Val

#*1300# = IMEI

#*1400# = IMSI

#*2562# = ??? White for 15 secs than restarts.

#*2565# = Check Blocking

#*3353# = Check Code

#*3837# = ??? White for 15 secs than restarts.

#*3849# = ??? White for 15 secs than restarts.

#*3851# = ??? White for 15 secs than restarts.

#*3876# = ??? White for 15 secs than restarts.

#*7222# = Operation Typ (Class C GSM)

#*7224# = I Got !! ERROR !!

#*7252# = Oparation Typ (Class B GPRS)

#*7271# = Multi Slot (Class 1 GPRS)

#*7274# = Multi Slot (Class 4 GPRS)

#*7276# = Dunno

#*7337# = EEPROM Reset (Unlock and Resets WAP Settings)

#*2787# = CRTP ON/OFF

#*3737# = L1 Dbg data

#*5133# = L1 Dbg data

#*7288# = GPRS Attached

#*7287# = GPRS Detached

#*7666# = SrCell Data

#*7693# = Sleep Act/DeAct (Enable or Disable the Black screen after doing nothing for a while)

#*7284# = Class : B,C or GPRS

#*2256# = Calibration Info

#*2286# = Battery Data

#*2527# = GPRS Switching (set to: class 4, class 8, class 9 or class 10)

#*2679# = Copycat feature (Activate or Deactivate)

#*3940# = External loop test 9600 bps

#*4263# = Handsfree mode (Activate or Deactivate)

#*4700# = Half Rate (Activate or Deactivate)

#*7352# = BVMC Reg value

#*8462# = Sleeptime

#*2558# = Time ON

#*3370# = EFR (Activate or Deactivate)

#*3941# = External looptest 115200 bps

#*5176# = L1 Sleep

#*7462# = SIM phase

#*7983# = Voltage/Frequenci (Activate or Deactivate)

#*7986# = Voltage (Activate or Deactivate)

#*8466# = Old time

#*2255# = Call ???

#*5187# = L1C2G trace (Activate or Deactivate)

#*5376# = ??? White for 15 secs than restarts.

#*6837# = Official Software Version

#*7524# = KCGPRS

#*7562# = LOCI GPRS

#*7638# = RLC allways open ended TBF (Activate or Deactivate)

#*7632# = Sleep mode Debug

#*7673# = Sleep mode RESET

#*2337# = Permanent Registration Beep

#*2474# = ???

#*2834# = Audio Path

#*3270# = DCS support (Activate or Deactivate)

#*3282# = Data (Activate or Deactivate)

#*3476# = EGSM (Activate or Deactivate)

#*3676# = Flash volume formated

#*4760# = GSM (Activate or Deactivate)

#*4864# = Dunno doesn't work on newer versions

#*5171# = L1P1

#*5172# = L1P2

#*5173# = L1P3

#*7326# = Accessory (I got Vibrator)

#*7683# = Sleep variable (

#*7762# = SMS Brearer CS (Activate or Deactivate)

#*8465# = Time in L1

#*9795# = wtls key

#*2252# = Current CAL

#*2836# = AVDDSS Management (Activate or Deactivate)

#*3877# = Dump of SPY trace

#*7728# = RSAV done# (Everything went to standart but nothing was deleted)

#*2677# = ARM State (None or Full Rate)

*#8999*636# = Have no clue what it is, i see 20 lines

*#9999# = Software version

*#8999*8376263# = HW ver, SW ver and Build Date

*#8888# = HW version

*#8377466# = Same HW/SW version thing

*#7465625# = Check the locks

*7465625*638*Code# = Enables Network lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*638*Code# = Disables Network lock

*7465625*782*Code# = Enables Subset lock

#7465625*782*Code# = Disables Subset lock

*7465625*77*Code# = Enables SP lock

#7465625*77*Code# = Disables SP lock

*7465625*27*Code# = Enables CP lock

#7465625*27*Code# = Disables CP lock

*7465625*746*Code# = Enables SIM lock

#7465625*746*Code# = Disables SIM lock

*7465625*228# = Activa lock ON

#7465625*228# = Activa lock OFF

*7465625*28638# = Auto Network lock ON

#7465625*28638# = Auto Network lock OFF

*7465625*28782# = Auto subset lock ON

#7465625*28782# = Auto subset lock OFF

*7465625*2877# = Auto SP lock ON

#7465625*2877# = Auto SP lock OFF

*7465625*2827# = Auto CP lock ON

#7465625*2827# = Auto CP lock OFF

*7465625*28746# = Auto SIM lock ON

#7465625*28746# = Auto SIM lock OFF

*2767*3855# = E2P Full Reset

*2767*2878# = E2P Custom Reset

*2767*927# = E2P WAP Reset

*2767*226372# = E2P Camera Reset

#*6420# = MIC Off

#*6421# = MIC On

#*6422# = MIC Data

#*6428# = MIC Measurement

#*3230# = Trace enable and DCD disable

#*3231# = Trace disable and DCD enable

#*3232# = Current Mode

#7263867# = RAM Dump (On or Off)

*2767*49927# = Germany WAP Settings

*2767*44927# = UK WAP Settings

*2767*31927# = Netherlands WAP Settings

*2767*420927# = Czech WAP Settings

*2767*43927# = Austria WAP Settings

*2767*39927# = Italy WAP Settings

*2767*33927# = France WAP Settings

*2767*351927# = Portugal WAP Settings

*2767*34927# = Spain WAP Settings

*2767*46927# = Sweden WAP Settings

*2767*380927# = Ukraine WAP Settings

*2767*7927# = Russia WAP Settings

*2767*30927# = GREECE WAP Settings

*2767*73738927# = WAP Settings Reset

*2767*49667# = Germany MMS Settings

*2767*44667# = UK MMS Settings

*2767*31667# = Netherlands MMS Settings

*2767*420667# = Czech MMS Settings

*2767*43667# = Austria MMS Settings

*2767*39667# = Italy MMS Settings

*2767*33667# = France MMS Settings

*2767*351667# = Portugal MMS Settings

*2767*34667# = Spain MMS Settings

*2767*46667# = Sweden MMS Settings

*2767*380667# = Ukraine MMS Settings

*2767*7667#. = Russia MMS Settings

*2767*30667# = GREECE MMS Settings

*335# = Delete all MMS Messages

*663867# = Dump Mm file

#*536961# = WAPSAR enable / HTTP disable

#*536962# = WAPSAR disable / HTTP enable

#*536963# = Serial eable / Others disable

#*53696# = Java Download Mode

#*5663351# = WAP Model ID [Your Model]

#*5663352# = WAP Model ID [SEC-SGHXXXX/1.0]

#*566335# = WAP Model ID [SEC-SGHXXXX/1.0]

*2767*66335# = Check on which model it is

*2767*7100# = SEC-SGHS100/1.0

*2767*8200# = SEC-SGHV200/1.0

*2767*7300# = SEC-SGHS300/1.0

*2767*7650# = Nokia7650/1.0

*2767*2877368# = Reset WAP Model ID to standart

sam