FortaCool News

#IntelligentStore by @Emerson

noreply@blogger.com (FortaCool) — Tue, 13 Dec 2011 18:28:00 +0000

An innovative approach to enterprise facility management, Emerson's Intelligent Store® architecture integrates hardware and services to help supermarket, convenience stores, and box retail operators make better facility decisions while reducing operational costs. The Intelligent Store architecture implements best practices for facility management and transforms data from store equipment and controls into actionable insights. Designed to deliver value in both new and existing stores, the Intelligent Store architecture can help retailers significantly improve their bottom line results.

For the full story visit:
http://fortacool.com/intelligentstore.html

Advancements in Software Help Visualize Alarms #Refrigeration #Supermarkets @RSIsacramento

noreply@blogger.com (FortaCool) — Tue, 01 Nov 2011 15:39:00 +0000

By Dave Yoder AHRnews.com

September 05, 2011

http://www.achrnews.com/articles/117727-advancements-in-software-help-visualize-alarms

As today’s supermarkets continue to evolve, it’s not uncommon for store directors and customer service representatives to find themselves busier and with more complex tasks to maintain store operation. Advances in software technology, however, are helping to simplify critical refrigeration management issues.

One aspect involves visualizing a store’s refrigeration system through an interactive tool that allows real-time alarm, defrost, and temperature status information to be displayed.
In such a case, the software can be loaded on existing store PCs, or installed on a separate touch-screen computer dedicated to the task. In the example of the Visual Interface Program (VIP), the software reads input-output information from Danfoss’ line of supermarket energy management controllers such as the Akcess 55 and AK 255. As a result, store personnel have the ability to see real-time temperatures and pressures, view which refrigerated areas are in defrost, and provide both an audio and visual indication if an area exceeds alarm limits.
By starting with a drawing of a building layout in AutoCAD® or Windows Metafile format, the site layout can be used as a backdrop for the VIP. Using the Edit mode, the program can be customized, allowing small boxes to be plotted anywhere on the drawing as needed to provide a space for the temperature sensor reading. After retrieving input and output points from the building’s controllers, a list of points is available for use. The list of temperature sensor points can then be used to display real-time temperature readings at each refrigerated case section.
Color codes automatically built into the case temperature displays help managers immediately identify problem areas, which can expedite response time to save product and money. Cases in defrost will appear as text in front of a yellow background. If a case sensor should exceed its alarm parameters, the case background will blink with a red background to allow the case to be easily noticed and identified, giving store personnel the information they need to respond to the problem.
More Information
Additionally, by clicking or tapping on the sensor reading, the user can find more information for each case section, including:
• Case status;
• Case target setting;
• Alarm settings;
• Defrost details;
• Manual defrost option;
• Graph of case temps based on user-selectable time periods.
The VIP system also allows users to access other parts of the Danfoss AKA65 software program, normally used for remote or direct-connection to energy management controllers. Controllers can be uploaded, downloaded, and edited in real-time from the users’ PC. The AKA65 button, therefore, allows a route to return to the main screen for the application.
The Refresh button is available if users want to verify readings are current, and Zoom In and Zoom Out buttons are provided to scale the drawing to personal preference. A list of the active and cleared alarms from all controllers can be viewed or acknowledged by selecting the Alarms button. An access code is needed to acknowledge alarms. If desired, the list can be reduced to only display active alarms. More detailed graphs can be compiled and displayed with the History button.
The technology can be tailored to include links to other pages with more detail relevant to the store’s system and needs. These links can be used to provide quick access to information on individual compressor racks, HVAC systems, or lighting loads, including photocell and lighting override options.
Publication date: 09/05/2011

New #Refrigeration #Condenser from #Heatcraft Helps #Supermarkets @HeatcraftWWR

noreply@blogger.com (FortaCool) — Mon, 31 Oct 2011 14:44:00 +0000

New Refrigeration Condenser from Heatcraft Helps Supermarkets

STONE MOUNTAIN, GA – MAY 18, 2011 – Heatcraft Refrigeration Products, a leader in commercial refrigeration, introduces its new air-cooled condenser featuring microchannel coil technology. This latest refrigeration solution includes an environmentally friendly design that lowers refrigerant charge by more than 70 percent, helping grocers significantly reduce their impact on the environment and save operating costs.

“In today’s marketplace, supermarkets want more than just a well-made piece of equipment,” said Subodh Sharma, Marketing Director for Heatcraft North America. “They want quality refrigeration solutions that can help decrease energy consumption and provide cost savings. Our new air-cooled condenser was developed with these business goals in mind.”

Equipped with a variable speed EC motor that helps maximize energy efficiency, the new condenser also includes an all-aluminum microchannel coil design that offers improved corrosion resistance for a longer-lasting, more durable product – even in coastal environments. It also features an innovative sound reduction technology that lowers sound pressure by more than 50 percent, resulting in a quieter product.

“Adding value to our customers’ businesses by developing environmentally friendly, high-performance products is one of our highest priorities,” says Dustan Atkinson, Product Manager for Heatcraft North America.

Developed in a lightweight, compact size, the condenser fits within the same basic footprint as comparable products, eliminating the need for major changes to building design.

In addition to supermarket applications, the air-cooled condenser is suitable for customers within the cold-storage and telecommunications industries, as well as a variety of other industries. This new condenser is available under the BOHN, Larkin, Climate Control and Chandler brands.

To learn more about this product, visit www.heatcraftrpd.com.

About Heatcraft Refrigeration Products, LLC

Heatcraft Refrigeration Products, LLC is a business unit of Heatcraft Worldwide Refrigeration that manufactures premium commercial refrigeration products under the BOHN™, Larkin™, Climate Control™, Chandler™ and InterLink™ brands. Heatcraft Refrigeration provides customers advanced refrigeration products through superior innovation with a commitment towards continuous improvement, the highest standards of quality and service and a driving need to be the first choice in refrigeration solutions. For more information, please visit HeatcraftRPD.com today.

About Heatcraft Worldwide Refrigeration

Heatcraft Worldwide Refrigeration is a global leader in the commercial refrigeration industry, serving over 70 countries worldwide. Heatcraft WWR is a subsidiary of Lennox International Inc. (NYSE: LII), a global leader in the heating, air-conditioning and refrigeration markets with over 13,000 employees worldwide and headquartered in Dallas, Texas. Already a global leader through customer service, Heatcraft WWR is also focused on providing energy-saving products under its E Solutions™ label.

Commercial #Refrigeration System in Operation

noreply@blogger.com (FortaCool) — Mon, 17 Oct 2011 20:08:00 +0000

Tour of a FortaCool Refrigeration System in a secure, weather proof, air cooled machine house.

AHR Expo 2012 Chicago

noreply@blogger.com (FortaCool) — Fri, 14 Oct 2011 17:00:00 +0000

The 2012 Show in Chicago is shaping up to be the largest AHR Expo ever, hosting more than 2,000 exhibiting companies from over 30 countries from around the globe.

AHR Expo is the one event where leading manufacturers and innovative suppliers showcase their latest products: from the most energy efficient systems and more sustainable building technology to state-of-the-art automation and controls, software, innovative tools, services, and much more.

Where over 50,000 visitors come to see what's new - contractors engineers, facility managers, OEMs, and other HVAC&R industry professionals - from all 50 states and over 120 countries!

Plan now to be at the world's largest HVAC&R marketplace.

http://www.ahrexpo.com/

Challenges of Refrigeration Plant

noreply@blogger.com (FortaCool) — Sat, 01 Oct 2011 20:45:00 +0000

Challenges of Refrigeration Plant

Anthony Macabenta

Maintain product temperature.
Provide an informative, yet easy to use system.
Provide remote access.
Do all possible with a cost effective operation.
Provide energy efficient systems.

Energy consumption is by far the largest cost center of a Refrigerant plant.

Stiff climb in the price of electricity.
Refrigeration systems are powered by motors which consume much of electricity.
Refrigerant plant run most of the time at part load.
Price of frequency controllers has dropped makes it very worth while.
Frequency controller can sometimes push the savings even further.

Refrigeration compressor with VFD’s

Energy savings are significant on higher compression ratios at part load.
Rapid response to rapid load change without wearing the slide valve.
Low noise at low speeds. — with Nepthali Alger Botor.

FortaCool Variable Speed Energy Savings

noreply@blogger.com (FortaCool) — Wed, 21 Sep 2011 21:44:00 +0000

FortaCool® Variable Speed Compressor Racks are proven to be 20-50% more efficient than conventional systems, resulting in
enormous energy savings for our customers. The Key to our energy savings is the use of Variable Frequency Drives (VFD’s)
  Our Variable Speed Drives control the speed of the motor as needed, bringing the motor to operating speed by soft starting it over a period of 30 to 45 seconds, resulting in more energy efficient compressors.
  Variable Speed Drives lower power bills because the compressors only run at the speed necessary to match the refrigeration loads and greatly reduced demand charges because the compressors are “soft started”
  Over 500% of normal running power is needed to start Conventional motors, resulting in a power “spike” with high “demand charges” which can have a considerable effect on the electric bill.
  Conventional motors come to operating speed from a dead stop to 1800 or even 3600rpm within one second, putting significant physical stress on the motor, causing more failures and maintenance costs.

See more information at our webpage dedicated to Variable Speed Energy Savings
www.fortacool.com/vfd.html

noreply@blogger.com (FortaCool) — Tue, 20 Sep 2011 20:28:00 +0000

60 ASHRAE Journal ashrae.org April 2010
Variable Frequency Drives, Part 1: The Technology
Does Energy Savings Trump Costs?
By John Dieckmann, Member ASHRAE; Kurtis McKenney; and James Brodrick, Ph.D., Member
ASHRAE

A variable frequency drive (VFD) is a power electronic device that drives the common “squirrel cage” induction motor over a range of speeds by converting standard frequency and voltage ac power from the electric utility to variable frequency, variable voltage power to energize the motor. Over the years, improvements have been made to VFDs’ effiency and reliabilty. They are now viable alternatives to other motor technologies.
  Induction motors operate at a speed that is proportional to the frequency of the input power (minus a small amount of slip that varies with the torque load on the motor). In HVAC&R, the common motor loads are refrigerant compressors, fans, blowers and pumps. By varying the speed of a motor and its driven load, the capacity can be varied to meet the real-time cooling, heating or ventilation load. As a result, significant energy savings can be realized, along with better comfort control. Other advantages include quieter operation and longer equipment life as a result of reduced average speed and soft starting of motors, which reduces the in-rush current and impact loading on equipment at startup.
  VFDs are alternately called variable speed drives, inverters, adjustable speed drives, or adjustable frequency drives. The focus of this article is on VFDs for induction motors. However, it is important to note that brushless dc motors, sometimes called permanent magnet rotor motors or electronically commutated motors, are another important class of electronically driven variable speed motors, used in applications such as blower motors and refrigerant compressors.
  Figure 1 is a simplified block diagram of a typical VFD. It has four basic subsystems: an ac/dc converter, a dc bus (also called the dc link), an inverter, and a control system. Alternating current from the electric utility is converted to dc in the ac/dc converter, generally a full wave rectifier bridge. The dc link maintains a steady dc voltage level using a capacitor upstream of the inverter. The inverter converts the dc back to ac at the frequency and voltage level needed to drive the motor at the desired speed.
In most instances of VFD-driven motors, the ac output is three-phase to drive a three-phase motor. The control system manages the inverter so that it produces the desired voltage and frequency, and generally includes fault monitoring features.
  Figure 2 shows the elements of the inverter in detail. The diode bridge shown is for three-phase ac input. The inverter section consists of six pairs of power transistors and freewheeling diodes.
While there are various ways to synthesize a three-phase ac output from a dc source, the most commonly used method is pulse width modulation (PWM).
As shown in Figure 3, the transistors are switched on and off rapidly (pulsed), at a carrier frequency that is much higher than the desired output frequency.
  The on-time of each pulse is varied to generate an approximation of a sinusoidal wave form. During the off-time of the pulse, the inductance of the motor winding draws current flow through the freewheeling diode such that the current flow is continuous and close to being sinusoidal.
Applications for VFDs are sometimes classified as “variable torque” or “constant torque.” Variable torque does not mean randomly variable torque and constant torque does not mean that the torque is fixed under all conditions.
  Variable torque refers to applications where the maximum torque load on the motor decreases as the speed decreases from the maximum speed to lower speeds. Centrifugal pumps, axial fans and centrifugal blowers are examples of variable torque applications in HVAC.
Constant torque refers to applications where the maximum required torque does not fall off appreciably as the speed decreases from the maximum. Positive displacement compressors and pumps are examples of constant torque applications in HVAC.
  As a general rule, a given VFD will have a higher motor power rating for a variable torque application than for a constant torque application. There are numerous technical considerations and potential pitfalls in applying VFDs, including damage from reflected voltage waves, higher peak voltages within the motor windings, motor noise, increased motor heating, unwanted harmonics on the ac input line, and induced currents in the motor bearings.
ASHRAE TC 1.11, Motors and Motor Control, maintains a chapter called “Motors, Motor Controls, and Variable-Speed Drives” in the HVAC Systems and Equipment volume of the ASHRAE Handbook (Chapter 44 in the 2008 edition). Technical considerations of VFDs are discussed in this chapter.
In many instances in HVAC equipment, the variable frequency drive is applied in a packaged system (e.g., a variable air volume air handling unit, a variable air-volume packaged rooftop unitary air conditioning system, or a large chiller with a variable speed compressor), and the manufacturer of the system has engineered the drive-motor-load-control system so that these pitfalls are avoided.

Energy Saving Potential
According to the DOE Buildings Energy Data Book1 space cooling, ventilation, and refrigeration in residential and commercial buildings consumed 8.2 quadrillion Btus (quads) of primary electric energy in 2006, the bulk of which is consumed by refrigerant compressors, fans, blowers, and pumps, and therefore can be reduced by implementing VFD technology.
Additionally, space heating in buildings consumed 1.7 quads of primary electric energy in 2006, a percentage of which (with the notable exception of electric resistance heating) can be reduced by applying VFDs as well.
In the next four articles, covering the major potential applications of VFDs in HVAC&R, we will break down the potential for energy savings in each of these areas. Here, we provide a brief overview of three of the major ways that efficient, variable speed operation of motors can save substantial amounts of energy in HVAC&R applications.
• The speed cubed fan and pump power law dictates that for propeller fans, centrifugal blowers and centrifugal pumps in systems with fixed-flow resistance, the air or water flow rate will vary with the rotational speed (RPM) while the power will vary with the cube of the speed, as shown in Figure 4. For example at 50% of maximum speed and flow, the power input drops to only 1/8 of the power at maximum speed. HVAC systems operate at part load most of the time, so modulating the flow, rather operating cyclically at full flow, can save significant amounts of energy.
• Continuous operation of cooling equipment at reduced capacity, instead of on-off operation at full capacity, results in less temperature lift, and hence increased compressor COP, as shown in Figure 5.
• Continuous operation of cooling equipment at reduced capacity, instead of on-off operation at full capacity, eliminates on-off cycling losses.

Market Factors
Acceptance of variable frequency drives was slow initially (going back 20 or 30 years) because of three basic factors:
high cost, questionable reliability, and limited experience in
properly applying VFDs.

Over time, all of these factors have been mitigated substantially.
Costs of full-featured, general-purpose drives
and of drives tailored for specific applications have fallen
significantly.
The reliability of VFDs has improved significantly at the
component, system, and application levels, and OEMs have
become more expert in applying drives cost-effectively, while
staying within reliability parameters.
As with any energy-saving technology, the added cost must
be offset by energy cost savings in an acceptable period of time
to be attractive in the market. With simple payback periods
often less than a few years, VFDs are now in widespread use
for variable speed blower drives, for compressor drives in
large chillers, and for chiller auxiliaries.
The next column will discuss the application of VFDs to blowers
in commercial building air-conditioning and ventilation systems.

FortaCool News

noreply@blogger.com (FortaCool) — Wed, 07 Sep 2011 18:23:00 +0000

FortaCool® Compressor Racks are custom built, UL Certified, Variable Speed Refrigeration Systems, designed to meet the specific needs of any facility. FortaCool® systems are the most energy efficient refrigeration compressor systems available and guarntee to give customers amazing savings on energy costs, as well as savings on overall cost of ownership.
FortaCool® Variable Speed Refrigeration Systems use computer programmed drives that control the speed of the compressor to match refrigeration loads. FortaCool® systems focus on high levels of energy efficiency, lowering the cost of ownership, and allowing for superior performance while saving customers money.