FUN MASTI MAZZA

FACEBOOK STATUS UPDATES

2012-09-02T02:23:00.000-07:00

#Never get too attached to anyone because attachments leads to expectations & expectations leads to disappointments.

Before you open your mouth, make sure you have a mind to back up all the things you say.

It's hard to trust someone the 2nd time around after they already gave you one reason not to trust them.

I'm not ignoring you. I'm just waiting to see if you'll make an effort for once.

"Be strong". A phrase that's easy to say but a hard thing to do when you're broken.

Sometimes, by holding on too tight, you end up losing what you were trying so hard to save.

Eventually, one of two things will happen. He will realize you're worth it, or you'll realize that he isn't.

She straightens her hair, puts on her makeup and wears her best outfits, all for the guy who will never notice.

It's not the goodbye that hurts, but the flashbacks that follow.

Sometimes we put up walls. Not to block people out, but to see who
cares enough to knock them down.

When people tell you you've changed, it's only because you stopped acting the way they want you to act.

That awkward moment when someone asks you what's wrong and they're the problEM.

So from now on when you think of me, just remember that I could have been the best thing you ever had.

TO OUR RESPECTED PRIME MINISTER

2012-08-22T08:48:00.000-07:00

RESPECTED PRIME MINITER

FACEBOOK ENTERTAINMENT LTD.

2012-08-20T00:02:00.003-07:00

GET JOINING IN MANY OF THE HELPFUL GROUPS AND PAGES ONLY ON FACEBOOK BY CLICKING BELOW PAGE AND DO LIKE IT..
VELLESSS GROUP
FOR LOVERS OF SCIENCE AND FREE ONLINE CLASSES AND COURSES
lovers alone
AND GET MUCH MORE ..........

EK THA TIGER

2012-08-18T23:15:00.000-07:00

FREE CALLS ANYWHERE ANYTIME

2012-06-04T08:18:00.001-07:00

Free World Dialup

Free World Dialup - http://www.freeworlddialup.com/
"Use FWD to make real, free phone calls using your favorite telephone, computer or PDA and any broadband connection. Call your neighbor or a relative, next door or in another country; all with the same ease, speed, and high quality." Thanks to Jeff Pulver and his crew!

Quick summary:

1 - First, got to http://www.freeworlddialup.com and sign up to get your FWD # and password.
2 - Download http://brands.xten.net/x-litefwd/download/X-LiteFWD_Install.exe FWD/X-Lite ("self-configures") program or go to http://www.myphonebooth.com/ to call any FWD # and U.S. toll free #s using Internet Explorer (Firefox not supported).

Quickstart Guide: http://www.freeworlddialup.com/support/quick_start_guide
FWD Xlite Configuration Guide: http://www.freeworlddialup.com/support/configuration_guide/configure_your_fwd_certified_phone/fwd_xlite/all
MS Windows Messenger Configuration Guide: http://pulver.com/fwd/fwd30news.html#messenger (FWD supports Windows Messenger 4.6/4.7 but not MSN Messenger 5.x.)

3 - To call a U.S. landline/cell #, dial *+arecode+7digit#. (This FWD feature is not listed on their website, but has been working for several months now.)

4 - To call a FWD # from a PSTN (your regular phone), click
http://www.dslreports.com/r0/download/476274~3ccc4c9edbe2a596714a4fd9da897204/fwdaccessnumbers.zip or after you've signed up go to FWD web page, click on "Features", "Access #s" for a list of FWD access numbers in your area. Available in several states in the U.S., UK, NL and DE at this time.

Packet8:
-- To call a P8 phone # from a FWD phone: Dial **898 + 1 + P8 number to be routed to P8 service.
-- To call a FWD # from a P8 phone:
*If the FWD # you are calling contains 5 digits, start to dial with the prefix 0351. For example: 035112345
*If the FWD # you are calling contains 6 digits, start to dial with the prefix 0451.

Call UK:
Get a UK telephone # that will call you on your FWD #. Register http://fwd.calluk.com.

FWD Features: Some features like Voice email needs to be activated at http://www.fwdnet.net

Internet Calling
Call Waiting
CallerID
Missed Call notification
Call Forwarding
Call Transfer
Three Way Calling
Voice email
SoftPhone, IP Phones & *Web-based
Aliases
Whitepages directory
ENUM Entry
eDial SOAP
Conferencing
Instant Messaging
Web Calling/FWD-Talk
Corporate Cisco Call Manager Connection
Calling to Toll Free Numbers in the UK, US, NL, JP and FR TellMe Service (411).
-- NL Dial *31(800)... to reach Netherlands toll free #s.
-- UK Dial *44(800)... or *44(808)... or *44 (500) to reach UK toll free #s.
-- US Dial *1(8xx) xxx xxxx to reach United States toll free #s.
-- JP Dial *81 0120... to reach Japan toll free #s.

Frequently used numbers
613 Echo test
55555 Volunteer Welcome Line
514 FWD Coffee House
612 Time
411 TellMe Information
611 Part Time Technical support
511 FWD Conference Bridge

At the moment, I think this is way better than Skype, Yahoo IM voice chat, etc...I've been using FWD for over a year with my cable broadband service and didn't have to set up any port forwarding on my broadband router. Obviously you'ld need a mic/speakers connected to your PC.

You can also use your regular telephone via an adapter http://voipstore.pulver.com/product_info.php?products_id=32 and IP phone http://voipstore.pulver.com/product_info.php?products_id=33. Adapters and IP phones from different vendors like Cisco are available.

* Broadbandreports.com VoIP forum (formerly known as DSLReports.com)
-- If you have any questions or just curious about VoIP, visit the VoIP forum http://www.dslreports.com/forum/voip at DSLReports.com

DRIVER GUIDE.COM

2012-06-04T08:12:00.003-07:00

DRIVER GUIDE.COM

NBC News Story

Let's face it, finding the right device driver can be a tedious, time consuming, often impossible task! The Driver Guide was created to make finding driver updates a whole lot easier. With the help of thousands of our members, we have compiled a massive database archive of drivers and resources that is by far the largest and most comprehensive on the Web. Here is what The Driver Guide will do for you:

* Provides an easy step-by-step process for finding and installing drivers.
* Offers a huge searchable archive of over 100,000 driver files, manufacturer information, and links.
* Includes discussion boards that give members the opportunity to interact with others with their hardware type, and learn from their experiences (very useful!).
* Offers a drivers found area where members can upload new and hard to find drivers for others to download.
* Provides a driver request board where members can make requests for specific drivers.
* Includes resources for Windows, Mac, Unix/Linux, and other platforms.
* Provides links to helpful tutorials, valuable utilities, and other resources.
* Offers a great collection of old, out of date, and hard to find drivers.
* Membership is absolutely FREE! Members are given lifetime access to this site.
* Since opening in 1997, millions of people have joined The Driver Guide!

http://www.driverguide.com/

username:drivers
password :all

Digital Photo ID Cards

2012-06-04T08:10:00.001-07:00

Digital Photo ID Cards

By Frank White

Q: What do you need to make a Digital Photo ID Card?

A: Making digital photo ID cards typically requires several components all working together.
1. You need a computer on which you run the photo ID badge software. You cannot print the cards on a PVC card printer without a computer – the printer can't perform anything without the computer.
2. You need software and it must:
a) Offer a database to store the names and personal information of the people for whom you want to issue badges.
b) Provide a way to integrate image capture with the database – not only import images, but associate the images with specific database records.
c) Provide a way to design and edit badges.
d) Send badges from the computer to a card printer. Badging software, like other business applications, comes in a variety of "flavors" – from low-end to high-end. That is, in addition to performing the simple processes described above, the application may come with many other "features" which enhance the usability and functionality of the application. Features might include requiring a secure log-on, allowing the user to add, delete, or edit database fields and create or print reports, etc.
3. You need a PVC card printer to print the badges. PVC (polyvinylchloride) is the same material that your white plastic household plumbing pipes are made out of. It is porous enough to allow colored inks to be absorbed into the surface of the plastic using a "dye sublimation" process, yet durable enough to last years. The PVC printer allows you to print a photo ID badge directly to a plastic card. The non-digital process required cutting and pasting an instant photo and inserting it into a laminated pouch which must then be sealed by sending it through a heat laminator.
4. You need a digital camera or other "input" device. Your PC and software must allow you to:
a) Plug in a camera.
b) Capture the image through the software. More versatile systems will allow you to capture portraits through video cameras, digital cameras, scanners, or by importing from a file –an "import from file" feature allows someone to send a picture to you by email as a file attachment, which you can then import into the database.
5. Additional hardware may be required, such as a video capture board for certain video cameras, tape backup device, UPS (uninterrupted power supply), etc. Video capture boards, for example, are installed in a PCI or AGP expansion slot on your PC's motherboard. The camera usually plugs directly into these boards. Special lighting may need to be set up where you take portrait pictures. If you want to incorporate fingerprints and signatures in your database and badge, then additional image capture devices will be required for them.
6. Consumables are also part of the package. You will need blank or pre-printed PVC cards and printer ribbons (usually in rolls which print from 250-350 cards per).

HOW TO Create An Ftp Server On Your Pc With Serv-u

2012-06-04T08:08:00.003-07:00

Create An Ftp Server On Your Pc With Serv-u

Requirements:
Serv-U
No-IP.com Website

Quote:

Step 1. Getting a static IP address.

Get a static address for your FTP server. You will want to do this as opposed to using your IP address for several reasons. First, it’s easier keeping up-to-date. Imagine having to change all of your setting every time your IP changed. With No-IP, the No-IP service runs in background on your computer and updates your current IP address with your FTP server’s URL (for example, you get ftp://rkchoolie.serveftp.com). Second reason, you don’t want your IP address posted out there for everyone to see.

1. Go to www.No-IP.com to create a new user account.
2. Fill in the information that is required and the click Register button.
3. Your account has now been created and your account password has been emailed to you.
4. Check your email mailbox and wait for the mail that contains your password
5. Go back to www.No-IP.com and type your email address and password to login to your account.
6. Once in your account, click on Add a host in the left menu
7. Type in the Hostname you want (example: rkchoolie) and pick a Domain from the list (example: ftpserve.com)
8. Check Allow Wildcards and click the Submit button
9. You now have your static address (example: rkchoolie.serveftp.com)
10. Click on your OS link in the Dyn-Update Client in the bottom right menu and follow links to download the client
11. Once downloaded, install the software and type in your email address and password when asked.
12. Finally tick the checkbox near your static address.

You now have a static web address .

Quote:

Step 2. Installing and setting the FTP server

1. Install Serv-U 4.0.
2. Start Serv-U and use the wizard to setup your ftp.
3. Click next until you're asked for an IP address, leave it blank and then click next.
4. Type the domain name you've just registered above (example: preacher.serveftp.com) in the domain name field and then click Next.
5. You are asked if you want to allow anonymous access, select No and then click next.
6. You are then asked to create a named account, check yes and then click next.
7. Type in the user name you wish for this account (example: Harrie) and click next.
8. Type a password for this account (example: $p3c1aL). For security reasons, try to create a password with some letters, numbers and special characters. Then click next.
9. You will then be asked for the Home directory of the account you just created. Select the directory and then click next.
10. Select yes to lock this account to the Home directory. You want to do this so that the user can not go any further up that his home directory. Click next.
11. The account is now set so click finish.

Quote:

Step 3. Configuring user accounts

1. In the left tree-menu, select the account you've just created and then click on the General tab.
2. Check Hide ‘Hidden’ Files.
3. Check Allow only and enter the number one in the box.
4. Set the Max. download speed to what ever you want. If this is an account that many will be using, set it low to save on your bandwidth. I usually have mine set between 10 – 20. If you leave it blank, users will be able to download from you at full bandwidth.
5. Set the Max no. of users to how many you want to be able to log on at one time. This depends on your connection speed but try these (56 - 1, ISDN - 3, ADSL or cable - 5-6 users.)
6. Now, click on the Dir Access tab.
7. You should see the home folder in there. Highlight it and make your permissions.
8. If you only want users to be able to download check only Read, List, & Inherit.
9. If you want users to be able to upload, but to only one particular folder but not download, click the add button and then select that folder. Now highlight the folder and set these permissions on that folder. Check Write, Append, List, Create, & Inherit. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this special upload folder to be list first, before the home folder.
10. If there is a folder that you don’t want anyone to have access to, but it is inside the home folder, then click the add button and then select that folder. Now highlight the folder and make sure that all checkboxes are left. Once you have made the permissions click on the up arrow that is located at the bottom right-hand corner. You want this no access folder to be listed at the very top.
11. There are many other different sets of permissions you can play with. I just covered your basics.
12. Your server is now set!
13. Try logging on with the username and password and see if it works.

DOMAIN NAME

2012-06-04T08:05:00.005-07:00

CHOOSING A GOOD NAME... YA.. GOOD NAME IS REALLY IMPORTANT!!!!

Choosing A Good Domain Name

Choosing a domain name for your site is one of the most important steps towards creating the perfect internet presence. If you run an on-line business, picking a name that will be marketable and achieve success in search engine placement is paramount. Many factors must be considered when choosing a good domain name. This article summarizes all the different things to consider before making that final registration step!

Short and Sweet

Domain names can be really long or really short (1 - 67 characters). In general, it is far better to choose a domain name that is short in length. The shorter your domain name, the easier it will be for people remember. Remembering a domain name is very important from a marketability perspective. As visitors reach your site and enjoy using it, they will likely tell people about it. And those people may tell others, etc. As with any business, word of mouth is the most powerful marketing tool to drive traffic to your site (and it's free too!). If your site is long and difficult to pronounce, people will not remember the name of the site and unless they bookmark the link, they may never return.

Consider Alternatives

Unless a visitor reaches your site through a bookmark or a link from another site, they have typed in your domain name. Most people on the internet are terrible typists and misspell words constantly. If your domain name is easy to misspell, you should think about alternate domain names to purchase. For example, if your site will be called "MikesTools.com", you should also consider buying "MikeTools.com" and "MikeTool.com". You should also secure the different top level domain names besides the one you will use for marketing purposes ("MikesTools.net", "MikesTools.org", etc.) You should also check to see if there are existing sites based on the misspelled version of the domain name you are considering. "MikesTools.com" may be available, but "MikesTool.com" may be home to a graphic pornography site. You would hate for a visitor to walk away thinking you were hosting something they did not expect.

Also consider domain names that may not include the name of your company, but rather what your company provides. For example, if the name of your company is Mike's Tools, you may want to consider domain names that target what you sell. For example: "buyhammers.com" or "hammer-and-nail.com". Even though these example alternative domain names do not include the name of your company, it provides an avenue for visitors from your target markets. Remember that you can own multiple domain names, all of which can point to a single domain. For example, you could register "buyhammers.com", "hammer-and-nail.com", and "mikestools.com" and have "buyhammers.com" and "hammer-and-nail.com" point to "mikestools.com".

Hyphens: Your Friend and Enemy

Domain name availability has become more and more scant over the years. Many single word domain names have been scooped up which it makes it more and more difficult to find a domain name that you like and is available. When selecting a domain name, you have the option of including hyphens as part of the name. Hyphens help because it allows you to clearly separate multiple words in a domain name, making it less likely that a person will accidentally misspell the name. For example, people are more likely to misspell "domainnamecenter.com" than they are "domain-name-center.com". Having words crunched together makes it hard on the eyes, increasing the likelihood of a misspelling. On the other hand, hyphens make your domain name longer. The longer the domain name, the easier it is for people to forget it altogether. Also, if someone recommends a site to someone else, they may forget to mention that each word in the domain name is separated by a hyphen. If do you choose to leverage hyphens, limit the number of words between the hyphens to three. Another advantage to using hyphens is that search engines are able to pick up each unique word in the domain name as key words, thus helping to make your site more visible in search engine results.

Dot What?

There are many top level domain names available today including .com, .net, .org, and .biz. In most cases, the more unusual the top level domain, the more available domain names are available. However, the .com top level domain is far and away the most commonly used domain on the internet, driven by the fact that it was the first domain extension put to use commercially and has received incredible media attention. If you cannot lay your hands on a .com domain name, look for a .net domain name, which is the second most commercially popular domain name extension.

Long Arm of the Law

Be very careful not to register domain names that include trademarked names. Although internet domain name law disputes are tricky and have few cases in existence, the risk of a legal battle is not a risk worth taking. Even if you believe your domain name is untouchable by a business that has trademarked a name, do not take the chance: the cost of litigation is extremely high and unless you have deep pockets you will not likely have the resources to defend yourself in a court of law. Even stay away from domain names in which part of the name is trademarked: the risks are the same.

Search Engines and Directories

All search engines and directories are different. Each has a unique process for being part of the results or directory listing and each has a different way of sorting and listing domain names. Search engines and directories are the most important on-line marketing channel, so consider how your domain name choice affects site placement before you register the domain. Most directories simply list links to home pages in alphabetical order. If possible, choose a domain name with a letter of the alphabet near the beginning ("a" or "b"). For example, "aardvark-pest-control.com" will come way above "joes-pest-control.com". However, check the directories before you choose a domain name. You may find that the directories you would like be in are already cluttered with domain names beginning with the letter "a". Search engines scan websites and sort results based on key words. Key words are words that a person visiting a search engine actually search on. Having key words as part of your domain name can help you get better results.

CAUGHT A VIRUSS...???

2012-06-04T08:03:00.000-07:00

CAUGHT A VIRUSS...???

If you've let your guard down--or even if you haven't--it can be hard to tell if your PC is infected. Here's what to do if you suspect the worst.

Heard this one before?

You must run antivirus software and keep it up to date or else your PC will get infected, you'll lose all your data, and you'll incur the wrath of every e-mail buddy you unknowingly infect because of your carelessness.

You know they're right. Yet for one reason or another, you're not running antivirus software, or you are but it's not up to date. Maybe you turned off your virus scanner because it conflicted with another program. Maybe you got tired of upgrading after you bought Norton Antivirus 2001, 2002, and 2003. Or maybe your annual subscription of virus definitions recently expired, and you've put off renewing.

It happens. It's nothing to be ashamed of. But chances are, either you're infected right now, as we speak, or you will be very soon.

For a few days in late January, the Netsky.p worm was infecting about 2,500 PCs a day. Meanwhile the MySQL bot infected approximately 100 systems a minute (albeit not necessarily desktop PCs). As David Perry, global director of education for security software provider Trend Micro, puts it, "an unprotected [Windows] computer will become owned by a bot within 14 minutes."

Today's viruses, worms, and so-called bots--which turn your PC into a zombie that does the hacker's bidding (such as mass-mailing spam)--aren't going to announce their presence. Real viruses aren't like the ones in Hollywood movies that melt down whole networks in seconds and destroy alien spacecraft. They operate in the background, quietly altering data, stealing private operations, or using your PC for their own illegal ends. This makes them hard to spot if you're not well protected.

Is Your PC "Owned?"

I should start by saying that not every system oddity is due to a virus, worm, or bot. Is your system slowing down? Is your hard drive filling up rapidly? Are programs crashing without warning? These symptoms are more likely caused by Windows, or badly written legitimate programs, rather than malware. After all, people who write malware want to hide their program's presence. People who write commercial software put icons all over your desktop. Who's going to work harder to go unnoticed?

Other indicators that may, in fact, indicate that there's nothing that you need to worry about, include:

* An automated e-mail telling you that you're sending out infected mail. E-mail viruses and worms typically come from faked addresses.

* A frantic note from a friend saying they've been infected, and therefore so have you. This is likely a hoax. It's especially suspicious if the note tells you the virus can't be detected but you can get rid of it by deleting one simple file. Don't be fooled--and don't delete that file.

I'm not saying that you should ignore such warnings. Copy the subject line or a snippet from the body of the e-mail and plug it into your favorite search engine to see if other people have received the same note. A security site may have already pegged it as a hoax.

Sniffing Out an Infection

There are signs that indicate that your PC is actually infected. A lot of network activity coming from your system (when you're not actually using Internet) can be a good indicator that something is amiss. A good software firewall, such as ZoneAlarm, will ask your permission before letting anything leave your PC, and will give you enough information to help you judge if the outgoing data is legitimate. By the way, the firewall that comes with Windows, even the improved version in XP Service Pack 2, lacks this capability.

To put a network status light in your system tray, follow these steps: In Windows XP, choose Start, Control Panel, Network Connections, right-click the network connection you want to monitor, choose Properties, check "Show icon in notification area when connected," and click OK.

If you're interested in being a PC detective, you can sniff around further for malware. By hitting Ctrl-Alt-Delete in Windows, you'll bring up the Task Manager, which will show you the various processes your system is running. Most, if not all, are legit, but if you see a file name that looks suspicious, type it into a search engine and find out what it is.

Want another place to look? In Windows XP, click Start, Run, type "services.msc" in the box, and press Enter. You'll see detailed descriptions of the services Windows is running. Something look weird? Check with your search engine.

Finally, you can do more detective work by selecting Start, Run, and typing "msconfig" in the box. With this tool you not only see the services running, but also the programs that your system is launching at startup. Again, check for anything weird.

If any of these tools won't run--or if your security software won't run--that in itself is a good sign your computer is infected. Some viruses intentionally disable such programs as a way to protect themselves.

What to Do Next

Once you're fairly sure your system is infected, don't panic. There are steps you can take to assess the damage, depending on your current level of protection.

* If you don't have any antivirus software on your system (shame on you), or if the software has stopped working, stay online and go for a free scan at one of several Web sites. There's McAfee FreeScan, Symantec Security Check, and Trend Micro's HouseCall. If one doesn't find anything, try two. In fact, running a free online virus scan is a good way to double-check the work of your own local antivirus program. When you're done, buy or download a real antivirus program.

* If you have antivirus software, but it isn't active, get offline, unplug wires-- whatever it takes to stop your computer from communicating via the Internet. Then, promptly perform a scan with the installed software.

* If nothing seems to be working, do more research on the Web. There are several online virus libraries where you can find out about known viruses. These sites often provide instructions for removing viruses--if manual removal is possible--or a free removal tool if it isn't. Check out GriSOFT's Virus Encyclopedia, Eset's Virus Descriptions, McAffee's Virus Glossary, Symantec's Virus Encyclopedia, or Trend Micro's Virus Encyclopedia.

A Microgram of Prevention

Assuming your system is now clean, you need to make sure it stays that way. Preventing a breach of your computer's security is far more effective than cleaning up the mess afterwards. Start with a good security program, such Trend Micro's PC-Cillin, which you can buy for $50.

Don't want to shell out any money? You can cobble together security through free downloads, such as AVG Anti-Virus Free Edition, ZoneAlarm (a personal firewall), and Ad-Aware SE (an antispyware tool).

Just make sure you keep all security software up to date. The bad guys constantly try out new ways to fool security programs. Any security tool without regular, easy (if not automatic) updates isn't worth your money or your time.

Speaking of updating, the same goes for Windows. Use Windows Update (it's right there on your Start Menu) to make sure you're getting all of the high priority updates. If you run Windows XP, make sure to get the Service Pack 2 update. To find out if you already have it, right-click My Computer, and select Properties. Under the General tab, under System, it should say "Service Pack 2."

Here are a few more pointers for a virus-free life:

* Be careful with e-mail. Set your e-mail software security settings to high. Don't open messages with generic-sounding subjects that don't apply specifically to you from people you don't know. Don't open an attachment unless you're expecting it.

* If you have broadband Internet access, such as DSL or cable, get a router, even if you only have one PC. A router adds an extra layer of protection because your PC is not connecting directly with the Internet.

* Check your Internet ports. These doorways between your computer and the Internet can be open, in which case your PC is very vulnerable; closed, but still somewhat vulnerable; or stealthed (or hidden), which is safest. Visit Gibson Research's Web site and run the free ShieldsUP test to see your ports' status. If some ports show up as closed--or worse yet, open--check your router's documentation to find out how to hide them.

CANT SEE SECURE SITES :(

2012-06-04T07:59:00.002-07:00

Fix the problem with seeing them secrue sites (banks or online stores) i found this very usefull to me at my work (isp backbone support lol, at the time i was regular support )

Any way... what u need to do is make a new notepad file and write in it the followng DLL's.. just copy-paste these

regsvr32 SOFTPUB.DLL

regsvr32 WINTRUST.DLL

regsvr32 INITPKI.DLL

regsvr32 dssenh.dll

regsvr32 Rsaenh.dll

regsvr32 gpkcsp.dll

regsvr32 sccbase.dll

regsvr32 slbcsp.dll

regsvr32 Cryptdlg.dll

and save it as > all file types, and make it something like securefix.bat.

then just run the file and ur problem shuld be gone.

BYPASS INTERNET CENSORSHIP;)

2012-06-04T07:56:00.002-07:00

BYPASS INTERNET CENSORSHIP;)

I remember not so long ago someone was asking about ways to get around and view sites that were blocked by the administrators, or some web filtering device, either at work or at school, hope this helps.

www.zensur.freerk.com
GO TO THIS LINK BELOW

http://en.cship.org/wiki/Main_Page

BIOS UPDATE PROCEDURE

2012-06-04T07:54:00.000-07:00

All latest Motherboards today, 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component. With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading.

Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this.

Please read the following instructions in full before starting a Flash BIOS upgrade:

A. Create a Bootable Floppy (in DOS)

•With a non-formatted disk, type the following:

format a:/s

•If using a formatted disk, type:

sys a:

This procedure will ensure a clean boot when you are flashing the new BIOS.

B. Download the BIOS file

•Download the correct BIOS file by clicking on the file name of the BIOS file you wish to download.

•Save the BIOS file and the Flash Utility file in the boot disk you have created. Unzip the BIOS file and the flash utility file. If you don't have an "unzip" utility, download the WinZip for Windows 95 shareware/ evaluation copy for that one time use from _www.winzip.com or _www.pkware.com. Most CD ROMs found in computer magazines, have a shareware version of WinZip on them.

•You should have extracted two files:

Flash BIOS utility eg: flash7265.exe (for example)

BIOS eg: 6152J900.bin (example)

Use the latest flash utility available unless otherwise specified (either on the BIOS update page or in the archive file). This information is usually provided.

C. Upgrade the System BIOS

During boot up, write down the old BIOS version because you will need to use it for the BIOS backup file name.

Place the bootable floppy disk containing the BIOS file and the Flash Utility in drive a, and reboot the system in MS-DOS, preferably Version 6.22

•At the A:> prompt, type the corresponding Flash BIOS utility and the BIOS file with its extension.

For example:

flash625 615j900.bin

•From the Flash Memory Writer menu, select "Y" to "Do you want to save BIOS?" if you want to save (back up) your current BIOS (strongly recommended), then type the name of your current BIOS and its extension after FILE NAME TO SAVE: eg: a:\613J900.bin

Alternatively select "N" if you don't want to save your current BIOS. Beware, though, that you won't be able to recover from a possible failure.

•Select "Y" to "Are you sure to program?"

•Wait until it displays "Message: Power Off or Reset the system"

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system. If you write to BIOS but cannot complete the procedure, do not switch off, because the computer will not be able to boo, and you will not be given another chance to flash. In this case leave your system on until you resolve the problem (flashing BIOS with old file is a possible solution, provided you've made a backup before)

Make sure the new BIOS version has been loaded properly by taking note of the BIOS identifier as the system is rebooting.

For AMI BIOS

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system holding the "END" key prior to power on until you enter CMOS setup. If you do not do this the first time booting up after upgrading the BIOS, the system will hang.

BIOS Update Tips

note:

1.Make sure never to turn off or reset your computer during the flash process. This will corrupt the BIOS data. We also recommend that you make a copy of your current BIOS on the bootable floppy so you can reflash it if you need to. (This option is not available when flashing an AMI BIOS).

2. If you have problems installing your new BIOS please check the following:

Have you done a clean boot?

In other words, did you follow the above procedure for making a bootable floppy? This ensures that when booting from "A" there are no device drivers on the diskette. Failing to do a clean boot is the most common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS.

If you have not used a bootable floppy, insure a clean boot either by

a) pressing F5 during bootup

b) by removing all device drivers on the CONFIG.SYS including the HIMEM.SYS. Do this by using the EDIT command.

Have you booted up under DOS?

Booting in Windows is another common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS. Make sure to boot up to DOS with a minimum set of drivers. Important: Booting in DOS does not mean selecting "Restart computer in MS-DOS Mode" from Windows98/95 shutdown menu or going to Prompt mode in WindowsNT, but rather following the above procedure (format a: /s and rebooting from a:\).

Have you entered the full file name of the flash utility and the BIOS plus its extension?

Do not forget that often you will need to add a drive letter (a:\) before flashing the BIOS. Example: when asked for file name of new BIOS file which is on your floppy disk, in case you're working from c:\ your will need to type a:\615j900.bin, rather than 615j900.bin only.

ADVANCED SHELLCODING TECHNIQUES ;)

2012-06-04T07:50:00.001-07:00

ADVANCED SHELLCODING TECHNIQUES ;)

***********************************************

* *

* Advanced Shellcoding Techniques - by Darawk *

* *

***********************************************

Introduction

This paper assumes a working knowledge of basic shellcoding techniques, and x86 assembly, I will not rehash these in this paper. I hope to teach you some of the lesser known shellcoding techniques that I have picked up, which will allow you to write smaller and better shellcodes. I do not claim to have invented any of these techniques, except for the one that uses the div instruction.

The multiplicity of mul

This technique was originally developed by Sorbo of darkircop.net. The mul instruction may, on the surface, seem mundane, and it's purpose obvious. However, when faced with the difficult challenge of shrinking your shellcode, it proves to be quite useful. First some background information on the mul instruction itself.

mul performs an unsigned multiply of two integers. It takes only one operand, the other is implicitly specified by the %eax register. So, a common mul instruction might look something like this:

movl $0x0a,%eax

mul $0x0a

This would multiply the value stored in %eax by the operand of mul, which in this case would be 10*10. The result is then implicitly stored in EDX:EAX. The result is stored over a span of two registers because it has the potential to be considerably larger than the previous value, possibly exceeding the capacity of a single register(this is also how floating points are stored in some cases, as an interesting sidenote).

So, now comes the ever-important question.

How can we use these attributes to our advantage when writing shellcode?
Well, let's think for a second, the instruction takes only one operand, therefore, since it is a very common instruction, it will generate only two bytes in our final shellcode. It multiplies whatever is passed to it by the value stored in %eax, and stores the value in both %edx and %eax, completely overwriting the contents of both registers, regardless of whether it is necessary to do so, in order to store the result of the multiplication. Let's put on our mathematician hats for a second, and consider this, what is the only possible result of a multiplication by 0? The answer, as you may have guessed, is 0. I think it's about time for some example code, so here it is:

xorl %ecx,%ecx

mul %ecx

What is this shellcode doing?

Well, it 0's out the %ecx register using the xor instruction, so we now know that %ecx is 0. Then it does a mul %ecx, which as we just learned, multiplies it's operand by the value in %eax, and then proceeds to store the result of this multiplication in EDX:EAX. So, regardless of %eax's previous contents, %eax must now be 0. However that's not all, %edx is 0'd now too, because, even though no overflow occurs, it still overwrites the %edx register with the sign bit(left-most bit) of %eax. Using this technique we can zero out three registers in only three bytes, whereas by any other method(that I know of) it would have taken at least six.

The div instruction

Div is very similar to mul, in that it takes only one operand and implicitly divides the operand by the value in %eax. Also like, mul it stores the result of the divide in %eax. Again, we will require the mathematical side of our brains to figure out how we can take advantage of this instruction. But first, let's think about what is normally stored in the %eax register. The %eax register holds the return value of functions and/or syscalls. Most syscalls that are used in shellcoding will return -1(on failure) or a positive value of some kind, only rarely will they return 0(though it does occur). So, if we know that after a syscall is performed, %eax will have a non-zero value, and that the instruction divl %eax will divide %eax by itself, and then store the result in %eax, we can say that executing the divl %eax instruction after a syscall will put the value 1 into %eax. So...how is this applicable to shellcoding? Well, their is another important thing that %eax is used for, and that is to pass the specific syscall that you would like to call to int $0x80. It just so happens that the syscall that corresponds to the value 1 is exit(). Now for an example:

xorl %ebx,%ebx

mul %ebx

push %edx

pushl $0x3268732f

pushl $0x6e69622f

mov %esp, %ebx

push %edx

push %ebx

mov %esp,%ecx

movb $0xb, %al #execve() syscall, doesn't return at all unless it fails, in which case it returns -1

int $0x80

divl %eax # -1 / -1 = 1

int $0x80

Now, we have a 3 byte exit function, where as before it was 5 bytes. However, there is a catch, what if a syscall does return 0? Well in the odd situation in which that could happen, you could do many different things, like inc %eax, dec %eax, not %eax anything that will make %eax non-zero. Some people say that exit's are not important in shellcode, because your code gets executed regardless of whether or not it exits cleanly. They are right too, if you really need to save 3 bytes to fit your shellcode in somewhere, the exit() isn't worth keeping. However, when your code does finish, it will try to execute whatever was after your last instruction, which will most likely produce a SIG ILL(illegal instruction) which is a rather odd error, and will be logged by the system. So, an exit() simply adds an extra layer of stealth to your exploit, so that even if it fails or you can't wipe all the logs, at least this part of your presence will be clear.

Unlocking the power of leal

The leal instruction is an often neglected instruction in shellcode, even though it is quite useful. Consider this short piece of shellcode.

xorl %ecx,%ecx

leal 0x10(%ecx),%eax

This will load the value 17 into eax, and clear all of the extraneous bits of eax. This occurs because the leal instruction loads a variable of the type long into it's desitination operand. In it's normal usage, this would load the address of a variable into a register, thus creating a pointer of sorts. However, since ecx is 0'd and 0+17=17, we load the value 17 into eax instead of any kind of actual address. In a normal shellcode we would do something like this, to accomplish the same thing:

xorl %eax,%eax

movb $0x10,%eax

I can hear you saying, but that shellcode is a byte shorter than the leal one, and you're quite right. However, in a real shellcode you may already have to 0 out a register like ecx(or any other register), so the xorl instruction in the leal shellcode isn't counted. Here's an example:

xorl %eax,%eax

xorl %ebx,%ebx

movb $0x17,%al

int $0x80

xorl %ebx,%ebx

leal 0x17(%ebx),%al

int $0x80

Both of these shellcodes call setuid(0), but one does it in 7 bytes while the other does it in 8. Again, I hear you saying but that's only one byte it doesn't make that much of a difference, and you're right, here it doesn't make much of a difference(except for in shellcode-size pissing contests =p), but when applied to much larger shellcodes, which have many function calls and need to do things like this frequently, it can save quite a bit of space.

Conclusion

I hope you all learned something, and will go out and apply your knowledge to create smaller and better shellcodes. If you know who invented the leal technique, please tell me and I will credit him/her.

ACCESSING THE ENTIRE INTERNET ON YOUR 3-PHONE LIKE U8110,E616 ETC..

2012-06-04T07:44:00.001-07:00

ACCESSING THE ENTIRE INTERNET ON YOUR 3-PHONE LIKE U8110,E616 ETC..

If you have a phone thats with the provider 3 theres a simple trick to allow you to access the entire internet on its browser without having to go through 3 services and only what they want to allow you access to view.

Simply do the following.

Menu - 9 (for settings) - 5 (for access points) - Edit the 3 Services

Change the APN (down the bottom) from 3services to 3netaccess

Restart the phone

And you can now access the entire internet through your phones browser.

Remember you'll have to change it back if you want to access 3 services.

Changing it in the browser doesn't seem to work.

I have tried this on my U8110 and it worked perfectly

Things to note:

* Remember that you are charged for all downloads (.4c per kb on most plans) so if your cautious about your phone bill id advise staying away from sites with loads of pictures.

* Also, some people have had trouble where they have accessed a site with too much information on it and the phone has either froze or reset. The phone is not harmed by this but its advisable you dont go to large sites on it for this or the above reason. If your phone freezes and you cant turn it off simply take the battery out and put it back in.

INCREDIBLE TECHNOLOGIES

2012-06-04T07:39:00.001-07:00

INCREDIBLE TECHNOLOGIES
Incredible Technologies (IT), based in Arlington Heights, Illinois is a US-based designer and manufacturer of coin-operated video games. Some of their games include Silver Strike Bowling, Power Putt, Target Toss Pro: Bags/Lawn Darts, and Golden Tee Golf. [1] IT specializes in the design and development of entertainment and gaming hardware, and software for coin-operated, consumer, cartridge-based and Class III gaming systems. The company employs over 100 people at its suburban Chicago campus.

A.Technology

Technological innovations at IT have included:

ITNet server-based technology, employing CDMA (Code Division Multiple Access), compiles statistics such as player scores and tournament activity from online coin-operated machines without use of telephone lines or an Internet connection.

Silent Partner route management tool, which was the first computer-based tool that coin-operated video game and vending machine operators had to electronically track and manage machine collections.
THE MOST ATTRACTED TECHNOLGY AND THE MAIN DISCUSSION ABOUT THAT IS GIVEN TO THE TED.COM.. (have a look :))))))THE ONE OF THE BEST EXAMPLE IS GIVEN BELOW ABOUT THE PRANAV MISTRY ( THE YOUTH SIXTH SENSE TECHNOLOGIST)

CLICK ON BELOW LINK TO KNOW ABOUT THAT TECHNOLOGIES..
1. PRANAV MISTRY WILL TELL U ABOUT THAT INCREDIBLE TECHNOLOGIES
2.the sixth sense technology and much more ;)

INDIAN PREMIER LEAGUE:)))))

2012-04-07T01:15:00.000-07:00

INDIAN PREMIER LEAGUE:)))))
http://www.iplschedule2012.in/

IPL 2012 Schedule/Timetable

The Schedule of the fifth season of IPL has been arrived. The tournament will begin on Apr 4, 2012. The schedule has been revealed by BCCI and IPL Committee. In all, 76 matches will be played by 9 teams at 12 different venues. This time viewers will miss Kochi Tuskers as they are not going to join the tournament. These 76 matches consist of 72 matches of all teams including two Qualifiers, Eliminator Match as well as the Final. Finally, we will come to know about the champion of DLF IPL-5 2012 on May 27, 2012. Sri Lankan Cricket Board gave proposal to schedule few of the games in Sri Lanka but BCCI and the IPL governing body has not accepted the proposal.

Chennai Super Kings who were the champions since two seasons of DLF IPL will begin the battle byplaying the first match of this season against the winners of the Champions League T20 2011, Mumbai Indians at MA Chidambaram Stadium of Chennai. In this season, we will see many new faces and miss many old faces at IPL 5. Stay tuned to get more information when the tournament begins. Now take a look at the full time table as well as match details of DLF IPL-5 2012.

1, Chennai Super Kings vs. Mumbai Indians

Date: April 4, 2012
Venue: Chennai
Time: 8:00 PM

2, Kolkata Knight Riders vs. Delhi Daredevils

Date: April 5, 2012
Venue: Kolkata
Time: 8:00 PM

3, Mumbai Indians vs. Pune Warriors

Date: April 6, 2012
Venue: Mumbai
Time: 4:00 PM

4, Rajasthan Royals vs. Kings XI Punjab

Date: April 6, 2012
Venue: Jaipur
Time: 8:00 PM

5, Royal Challengers Bangalore vs. Delhi Daredevils

Date: April 7, 2012
Venue: Bangalore
Time: 4:00 PM

6, Deccan Chargers vs. Chennai Super Kings

Date: April 7, 2012
Venue: Visakhapatnam
Time: 8:00 PM

7, Rajasthan Royals vs. Kolkata Knight Riders

Date: April 8, 2012
Venue: Jaipur
Time: 4:00 PM

8, Pune Warriors vs. Kings XI Punjab

Date: April 8, 2012
Venue: Pune
Time: 8:00 PM

9, Deccan Chargers vs. Mumbai Indians

Date: April 9, 2012
Venue: Visakhapatnam
Time: 8:00 PM

10, Royal Challengers Bangalore vs. Kolkata Knight Riders

Date: April 10, 2012
Venue: Bangalore
Time: 4:00 PM

11, Delhi Daredevils vs. Chennai Super Kings

Date: April 10, 2012
Venue: Delhi
Time: 8:00 PM

12, Mumbai Indians vs. Rajasthan Royals

Date: April 11, 2012
Venue: Mumbai
Time: 8:00 PM

13, Chennai Super Kings vs. Royal Challengers Bangalore

Date: April 12, 2012
Venue: Chennai
Time: 4:00 PM

14, Kings XI Punjab vs. Pune Warriors

Date: April 12, 2012
Venue: Mohali
Time: 8:00 PM

15, Kolkata Knight Riders vs. Rajasthan Royals

Date: April 13, 2012
Venue: Kolkata
Time: 8:00 PM

16, Delhi Daredevils vs. Deccan Chargers

Date: April 14, 2012
Venue: Delhi
Time: 4:00 PM

17, Pune Warriors vs. Chennai Super Kings

Date: April 14, 2012
Venue: Bangalore
Time: 8:00 PM

18, Kolkata Knight Riders vs. Kings XI Punjab

Date: April 15, 2012
Venue: Kolkata
Time: 4:00 PM

19, Royal Challengers Bangalore vs. Rajasthan Royals

Date: April 15, 2012
Venue: Jaipur
Time: 8:00 PM

20, Mumbai Indians vs. Delhi Daredevils

Date: April 16, 2012
Venue: Mumbai
Time: 4:00 PM

21, Rajasthan Royals vs. Deccan Chargers

Date: April 17, 2012
Venue: Jaipur
Time: 4:00 PM

22, Royal Challengers Bangalore vs. Pune Warriors

Date: April 17, 2012
Venue: Bangalore
Time: 8:00 PM

23, Kings XI Punjab vs. Kolkata Knight Riders

Date: April 18, 2012
Venue: Mohali
Time: 8:00 PM

24, Deccan Chargers vs. Delhi Daredevils

Date: April 19, 2012
Venue: TBC
Time: 8:00 PM

25, Chennai Super Kings vs. Pune Warriors

Date: April 19, 2012
Venue: Chennai
Time: 8:00 PM

26, Kings XI Punjab vs. Royal Challengers Bangalore

Date: April 20, 2012
Venue: Mohali
Time: 8:00 PM

27, Chennai Super Kings vs. Rajasthan Royals

Date: April 21, 2012
Venue: Chennai
Time: 4:00 PM

28, Delhi Daredevils vs. Pune Warriors

Date: April 21, 2012
Venue: Delhi
Time: 8:00 PM

29, Mumbai Indians vs. Kings XI Punjab

Date: April 22, 2012
Venue: Mumbai
Time: 8:00 PM

30, Deccan Chargers vs. Mumbai Indians

Date: April 22, 2012
Venue: Visakhapatnam
Time: 8:00 PM

31, Rajasthan Royals vs. Royal Challengers Bangalore

Date: April 23, 2012
Venue: Jaipur
Time: 8:00 PM

32, Pune Warriors vs. Delhi Daredevils

Date: April 24, 2012
Venue: Pune
Time: 4:00 PM

33, Kolkata Knight Riders vs. Deccan Chargers

Date: April 24, 2012
Venue: Kolkata
Time: 8:00 PM

34, Kings XI Punjab vs. Mumbai Indians

Date: April 25, 2012
Venue: Mohali
Time: 4:00 PM

35, Royal Challengers Bangalore vs. Chennai Super Kings

Date: April 25, 2012
Venue: Bangalore
Time: 8:00 PM

36, Pune Warriors vs. Deccan Chargers

Date: April 26, 2012
Venue: Pune
Time: 8:00 PM

37, Delhi Daredevils vs. Mumbai Indians

Date: April 27, 2012
Venue: Delhi
Time: 8:00 PM

38, Chennai Super Kings vs. Kings XI Punjab

Date: April 28, 2012
Venue: Chennai
Time: 4:00 PM

39, Kolkata Knight Riders vs. Royal Challengers Bangalore

Date: April 28, 2012
Venue: Kolkata
Time: 8:00 PM

40, Delhi Daredevils vs. Rajasthan Royals

Date: April 29, 2012
Venue: Delhi
Time: 4:00 PM

41, Mumbai Indians vs. Deccan Chargers

Date: April 29, 2012
Venue: Mumbai
Time: 8:00 PM

42, Chennai Super Kings vs. Kolkata Knight Riders

Date: April 30, 2012
Venue: Chennai
Time: 8:00 PM

43, Deccan Chargers vs. Pune Warriors

Date: May 1, 2012
Venue: Hyderabad
Time: 4:00 PM

44, Rajasthan Royals vs. Delhi Daredevils

Date: May 1, 2012
Venue: Jaipur
Time: 8:00 PM

45, Royal Challengers Bangalore vs. Kings XI Punjab

Date: May 2, 2012
Venue: Bangalore
Time: 8:00 PM

46, Pune Warriors vs. Mumbai Indians

Date: May 3, 2012
Venue: Pune
Time: 8:00 PM

47, Chennai Super Kings vs. Deccan Chargers

Date: May 4, 2012
Venue: Chennai
Time: 8:00 PM

48, Kolkata Knight Riders vs. Pune Warriors

Date: May 5, 2012
Venue: Kolkata
Time: 4:00 PM

49, Kings XI Punjab vs. Rajasthan Royals

Date: May 5, 2012
Venue: Mohali
Time: 8:00 PM

50, Mumbai Indians vs. Chennai Super Kings

Date: May 6, 2012
Venue: Jaipur
Time: 4:00 PM

51, Royal Challengers Bangalore vs. Deccan Chargers

Date: May 6, 2012
Venue: Bangalore
Time: 8:00 PM

52, Delhi Daredevils vs. Kolkata Knight Riders

Date: May 7, 2012
Venue: Delhi
Time: 8:00 PM

53, Pune Warriors vs. Rajasthan Royals

Date: May 8, 2012
Venue: Pune
Time: 4:00 PM

54, Deccan Chargers vs. Kings XI Punjab

Date: May 8, 2012
Venue: Hyderabad
Time: 8:00 PM

55, Mumbai Indians vs. Royal Challengers Bangalore

Date: May 9, 2012
Venue: Mumbai
Time: 8:00 PM

56, Rajasthan Royals vs. Chennai Super Kings

Date: May 10, 2012
Venue: Jaipur
Time: 8:00 PM

57, Pune Warriors vs. Royal Challengers Bangalore

Date: May 11, 2012
Venue: Pune
Time: 8:00 PM

58, Kolkata Knight Riders vs. Mumbai Indians

Date: May 12, 2012
Venue: Kolkata
Time: 4:00 PM

59, Chennai Super Kings vs. Delhi Daredevils

Date: May 12, 2012
Venue: Chennai
Time: 8:00 PM

60, Rajasthan Royals vs. Pune Warriors

Date: May 13, 2012
Venue: Jaipur
Time: 4:00 PM

61, Kings XI Punjab vs. Deccan Chargers

Date: May 13, 2012
Venue: Mohali
Time: 8:00 PM

62, Royal Challengers Bangalore vs. Mumbai Indians

Date: May 14, 2012
Venue: Bangalore
Time: 4:00 PM

63, Kolkata Knight Riders vs. Chennai Super Kings

Date: May 14, 2012
Venue: Kolkata
Time: 8:00 PM

64, Delhi Daredevils vs. Kings XI Punjab

Date: May 15, 2012
Venue: Delhi
Time: 8:00 PM

65, Mumbai Indians vs. Kolkata Knight Riders

Date: May 16, 2012
Venue: Mumbai
Time: 8:00 PM

66, Kings XI Punjab vs. Chennai Super Kings

Date: May 17, 2012
Venue: Mohali
Time: 4:00 PM

67, Delhi Daredevils vs. Royal Challengers Bangalore

Date: May 17, 2012
Venue: Delhi
Time: 8:00 PM

68, Deccan Chargers vs. Rajasthan Royals

Date: May 18, 2012
Venue: Hyderabad
Time: 8:00 PM

69, Kings XI Punjab vs. Delhi Daredevils

Date: May 19, 2012
Venue: Dharamsala
Time: 4:00 PM

70, Pune Warriors vs. Kolkata Knight Riders

Date: May 19, 2012
Venue: Pune
Time: 8:00 PM

71, Deccan Chargers vs. Royal Challengers Bangalore

Date: May 20, 2012
Venue: Hyderabad
Time: 4:00 PM

72, Rajasthan Royals vs. Mumbai Indians

Date: May 20, 2012
Venue: Jaipur
Time: 8:00 PM

Qualifier 1

73, 1st Semi-Finalist vs. 2nd Semi-Finalist

Date: May 22, 2012
Venue: Bangalore
Time: 8:00 PM

Eliminator

74, 3rd Semi-Finalist vs. 4th Semi-Finalist

Date: May 23, 2012
Venue: Bangalore
Time: 8:00 PM

Qualifier 2

75, Winner Eliminator vs. Loser Qualifier 1

Date: May 25, 2012
Venue: Chennai
Time: 8:00 PM

76, FINAL

Date: May 27, 2012
Venue: Chennai

Time: 8:00 PM.

RA.ONE VIDEO..

2011-11-08T22:25:00.000-08:00

LIFE OF MAHATMA GANDHI

2011-10-01T22:46:00.000-07:00

This is a 5 hrs. 10 min. documentary biography of Mohandas Mahatma Gandhi. All events and principles of Gandhi's life and thought are viewed as integrated parts of his truth-intoxicated life depicting permanent and universal values. The purpose of the film is to tell the present and the future generations "that such a man as Gandhi in flesh and blood walked upon this earth", to acquaint them with his life and work and to spread his message of peace and universal brotherhood to the war-weary and fear-stricken world. The film brings together a mass of visual record not only of 78-year life of Gandhi but also of an important period of India's history. The aim of the film being education and not entertainment, there is no attempt at dramatization of those exciting times. The story is told with an eye to truthful documentation of the main events within the limits of available documentary visual material… Read more about the film: http://streams.gandhiserve.org/mahatma.html Film id: mahatma_full_640x480 Courtesy: GandhiServe Foundation – Mahatma Gandhi Research and Media Service, http://www.gandhiserve.org For personal, institutional and commercial use contact: media@gandhimail.org

COMPUTER ERROR CODES

2011-09-21T23:00:00.000-07:00

After repeated requests for beep codes i have decided to post them here maybe they could be pinned

Standard Original IBM POST Error Codes
Code Description

1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes
Code Description

1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure

SPYWARE

2011-09-21T22:53:00.000-07:00

There are a lot of PC users that know little about "Spyware", "Mal-ware", "hijackers", "Dialers" & many more. This will help you avoid pop-ups, spammers and all those baddies.
What is spy-ware?

Spy-ware is Internet jargon for Advertising Supported software (Ad-ware). It is a way for shareware authors to make money from a product, other than by selling it to the users. There are several large media companies that offer them to place banner ads in their products in exchange for a portion of the revenue from banner sales. This way, you don't have to pay for the software and the developers are still getting paid. If you find the banners annoying, there is usually an option to remove them, by paying the regular licensing fee. Known spywares There are thousands out there, new ones are added to the list everyday. But here are a few: Alexa, Aureate/Radiate, BargainBuddy, ClickTillUWin, Conducent Timesink, Cydoor, Comet Cursor, eZula/KaZaa Toptext, Flashpoint/Flashtrack, Flyswat, Gator, GoHip, Hotbar, ISTbar, Lions Pride Enterprises/Blazing Logic/Trek Blue, Lop (C2Media), Mattel Brodcast, Morpheus, NewDotNet, Realplayer, Songspy, Xupiter, Web3000, WebHancer, Windows Messenger Service. How to check if a program has spyware? The is this Little site that keeps a database of programs that are known to install spyware. Check Here: http://www.spywareguide.com/product_search.php If you would like to block pop-ups (IE Pop-ups). There tons of different types out there, but these are the 2 best, i think. Try: Google Toolbar (http://toolbar.google.com/) This program is Free Try: AdMuncher (http://www.admuncher.com) This program is Shareware If you want to remove the "spyware" try these. Try: Lavasoft Ad-Aware (http://www.lavasoftusa.com/) This program is Free Info: Ad-aware is a multi spyware removal utility, that scans your memory, registry and hard drives for known spyware components and lets you remove them. The included backup-manager lets you reinstall a backup, offers and multi language support. Try: Spybot-S&D (http://www.safer-networking.org/)
This program is Free Info: Detects and removes spyware of different kinds (dialers, loggers, trojans, user tracks) from your computer. Blocks ActiveX downloads, tracking cookies and other threats. Over 10,000 detection files and entries. Provides detailed information about found problems. Try: BPS Spyware and Adware Remover (http://www.bulletproofsoft.com/spyware-remover.html) This program is Shareware Info: Adware, spyware, trackware and big brotherware removal utility with multi-language support. It scans your memory, registry and drives for known spyware and lets you remove them. Displays a list and lets you select the items you'd like to remove. Try: Spy Sweeper This program is Shareware Info: Detects and removes spyware of different kinds (dialers, loggers, trojans, user tracks) from your computer. The best scanner out there, and updated all the time. Try: HijackThis 1.97.7 (http://www.spywareinfo.com/~merijn/downloads.html) This program is Freeware Info: HijackThis is a tool, that lists all installed browser add-on, buttons, startup items and allows you to inspect them, and optionally remove selected items. If you would like to prevent "spyware" being install. Try: Spyware Blaster 2.6.1 (http://www.wilderssecurity.net/spywareblaster.html) This program is Free Info: Spyware Blaster doesn`t scan and clean for so-called spyware, but prevents it from being installed in the first place. It achieves this by disabling the CLSIDs of popular spyware ActiveX controls, and also prevents the installation of any of them via a webpage. Try: SpywareGuard 2.2 (http://www.wilderssecurity.net/spywareguard.html) This program is Free Info: SpywareGuard provides a real-time protection solution against so-called spyware. It works similar to an anti-virus program, by scanning EXE and CAB files on access and alerting you if known spyware is detected. Try: XP-AntiSpy (http://www.xp-antispy.org/) This program is Free Info: XP-AntiSpy is a small utility to quickly disable some built-in update and authentication features in WindowsXP that may rise security or privacy concerns in some people. Try: SpySites (http://camtech2000.net/Pages/SpySites_Prog...ml#SpySitesFree) This program is Free Info: SpySites allows you to manage the Internet Explorer Restricted Zone settings and easily add entries from a database of 1500+ sites that are known to use advertising tracking methods or attempt to install third party software. If you would like more Information about "spyware". Check these sites.http://www.spychecker.com/http://www.spywareguide.com/http://www.cexx.org/adware.htmhttp://www.theinfomaniac.net/infomaniac/co...rsSpyware.shtmlhttp://www.thiefware.com/links/http://simplythebest.net/info/spyware.html Usefull tools... Try: Stop Windows Messenger Spam 1.10 (http://www.jester2k.pwp.blueyonder.co.uk/j...r2ksoftware.htm) This program is Free Info: "Stop Windows Messenger Spam" stops this Service from running and halts the spammers ability to send you these messages.
---------------------------------------------------------------------------- All these softwares will help remove and prevent evil spammers and spywares attacking your PC. I myself recommend getting "spyblaster" "s&d spybot" "spy sweeper" & "admuncher" to protect your PC. A weekly scan is also recommended Free Virus Scan Scan for spyware, malware and keyloggers in addition to viruses, worms and trojans. New threats and annoyances are created faster than any individual can keep up with. http://defender.veloz.com// - 15k Finding . is a Click Away at 2020Search.com Having trouble finding what you re looking for on: .? 2020Search will instantly provide you with the result you re looking for by drawing on some of the best search engines the Internet has to offer. Your result is a click away! http://www.2020search.com// - 43k Download the BrowserVillage Toolbar. Customize your Browser! Eliminate Pop-up ads before they start, Quick and easy access to the Web, and much more. Click Here to Install Now! http://www.browservillage.com/ - 36k

2011-09-15T06:48:00.000-07:00

GO GREEN AVOID POLLUTION

2011-09-15T06:39:00.000-07:00

MY EARTH MY DUTY
Zee News’ ‘My Earth My Duty’ campaign, launched on June 5, 2010, is a social initiative with an objective to spread awareness on climate change. The initiative aims at engaging various members of the society to sensitize and encourage them to take concrete action towards mitigating the effects of climate change. The campaign reached out to a whopping 50 million people last year and entered Limca Book of Records 2010-2011for setting a record of planting more than 7.3 million trees in one single day(25th August 2010) across .25 million villages and all the District Headquarters in India.

This year, Zee News once again rolled out the campaign in association with NYKS with the same objective on World Environment Day (June 5, 2011). United Nations Development Programme (UNDP) and United Nations Volunteers (UNV) are also supporting the campaign.
On 12 September 2011, a nationwide Earth Festival would also be celebrated with the nation’s biggest plantation drive. Ministry of Youth Affairs and Sports (NYKS, NSS), UNDP, UNV, ETF(plantation in ecologically disturbed areas), ITBP, NCC, CRPF etc. are supporting Zee News to involve 50 million volunteers in planting 10 million saplings on 12 September 2011 throughout India.

Spread over a period of three months, the campaign is being drawn up as an innovative one from all conceivable aspects and has been designed to reach a sizeable population effectively across the nation in various languages like Hindi, Marathi, Gujarati, Bengali and others.

A series of ground events such as rallies, seminars, camps, painting competition, street plays, etc will also be organized. The same will be promoted under a 360 degree promotional plan comprising electronic media in the form of promos, special news bulletins, discussions, and print, radio, mobile, online with a dedicated microsite - Zeenews.com/myearth along with new media including Facebook & Twitter.

Rohit Kumar, Head–Marketing, Zee News, said, “Our concern and objectives regarding the environment remain the same. Global warming and other environment hazards continue to pose serious threats. For the second year, we shall endeavor to spread awareness about these threats and not only awaken people’s thought to it but generate public response by inspiring them to act against the climate change and plant maximum number of trees on Sept 12. As at Zee News, we always believe in the Power of Thought” .

http://www.pals.in/

Pure Air Lovers Society | PALS

http://znn.india.com/Img/2010/10/6/eventgl-30.jpg

MOST ROCKING VIDEO

2011-09-09T10:00:00.000-07:00

ALL TIME HITS!!!!!!!!!!!!!!!!!!!!!

HACKING TUTORIAL

2011-09-09T09:39:00.000-07:00

I was just asking to know if there is some audiance before
here is my methode
for hacking anti leech
we gona use a soft calde proxo mitron
proxomitron is an anti bull script web proxy it' works buy applying some rules to elliuminte pop up and many other thing but for our cas we need to desactive all this filtring first goto
www.proxomitron.info
download a copy of the soft
then you need to unselect all the option of the soft
and clik on log window
no go to a anti leech web site
use the plug in and not netpumper
in the plugin add a proxy you must put this proxy adress
127.0.0.1 8080 for http the same for ftp
now select the file to download a click download
watch in proximitron log winodws you will see many internal forwarding
if the file are located in a ftp server
proximitron dont handel them
and you will find an error
in a ftp adress
if it's a http adress
you will find some thing like
get /blablalma/bla/file
site tr.com
and you have foudn the adress
it' tr.com/blabla/file