Furnitology Productions

WoodExpo 2012 Starts

noreply@blogger.com (Neil....a Furnitologist) — Thu, 23 Feb 2012 01:03:00 +0000

Today: February 22, 2012 is drop-off day for WoodExpo2012. Unfortunately for me, I’m on injured reserve and will miss the weekend festivities. I’m bumming but the guys have it under control. I’ll watch via the content that comes out and no doubt I’ll get my share of text messages to keep me abreast.

Since being active early on in the internet woodworking community, I have always stressed the build as an extremely important part of anybody’s woodworking, especially those who think of themselves as furniture designers. Showing your work is vital to a furniture maker’s improvement. You need to see how your work stacks up with the public and with others who have the ambition to show. There’s no hiding when people can get up close and kick around the quality of your work.

This will be the second year where we’ve opened up the exhibition to those woodworkers who desire to show there work and move out of the woodworking gadfly category.

We’ve made numerous improvements in our presentation this year, but two new additions that I will sorely miss is the Panel Discussion and giving main demonstration bench opportunity to two internet active returning exhibitors.

The theme behind WoodExpo2012 is to “re-connect with the buyer”. As the schedule shows, on Saturday and Sunday there will be a discussion titled “Finding Furniture: The Maker/Client Relationship”. The likes of Allan Breed, Glen Guarino, Chuck Bender, and Tom McLaughlin may quite possibly set the table straight. That is my curiosity: will they talk from the consumer point of view or their own, and if it is from their own, who determines value? Should be interesting.

The other presentations I am disappointed to miss, are the demo’s by Rob Bois and Morton. Both Rob and Morton are returning exhibitors and we feel that should be rewarded. We believe it will position them in regards to the other exhibitors and a boost in street cred. I’m not much for seeing the same talking heads, I believe there is so much talent out there that it’s time for some to make room for the likes of Rob and Morton. Anybody can repeat technical presentations, it’s the body of work that makes the difference. Have at it boys, I’m sorry I’ll miss your presentations.

Get Woodworking

noreply@blogger.com (Neil....a Furnitologist) — Wed, 08 Feb 2012 19:20:00 +0000

So this week, Tom’s Workbench says to get woodworking.

At first I thought it was for the woodworking community to get woodworking but I see now its about bringing new blood into the craft of woodworking.

So here’s my contribution for the individual just simply curious about woodworking. You know, the person who has seen a few YouTube videos, has a bit of space, no tools, but wonders that if I’m gonna just do it, what do I just do next??

My suggestion is to somehow get a visual as to what you believe you might need in order to make something out of wood. Something that will explain lumber, a visual of different tools, a description of those tools, an intro to sharpening, adhesives, pictures of the different joinery, fasteners, boring tools, and even a plan for a simple cabinetmakers bench to get you started.

Since woodworking is all about the visual of your finished project, you need to start with Woodwork Visualized, by Ross C. Cramlet. Pick it up used for a few bucks.

My copy, a second edition, is over 30 years old. I found it no problem. It’s a super book to have at the ready. Woodwork Visualized, with certainty, will familiarize you with the craft of woodworking in picture format with limited reading.

Now that's a wonderful way to enter the woodworking craft.

So see what a board foot is, visualize first then pick-up a few lay out tools, see what you need to cut and shape the wood, look at your fastening options and just Get Woodworking.

Top 10 Most Influential Furniture Designers

noreply@blogger.com (Neil....a Furnitologist) — Thu, 15 Dec 2011 14:52:00 +0000

Creating this list was no easy task. I fretted over the likes of Boulle, Ruhlmann, the Bauhaus, and Sidney Barnsley. But my list is well thought out and they did not make the cut. Oh 10 years from now I may change a name or 2, perhaps replace a time period with an individual but this list of the 10 most influencial furniture designers is finished. You can double click the time-line to reference a larger view.

The following is in chronological order and not based on who had the most influence. So lets start with:

the Renaissance

a period of enlightenment, a time when regions that now comprise Italy took the arts center stage, all while Medici funded architectural experimentation. Perspective is what turns up in furniture which eventually became the focal point of marquetry.
Starting as intarsia, pictures in perspective created in wood later turned into furniture embellishment. Furniture now could tell a story. Lets look to the Met at Studiolo and to the work of Fra Giovanni pictured.
Mostly importantly, this enlighting Renaissance period had anybody who was a player heading south to learn the tricks of the trade. From France, from Germany, from Belgium and Holland, artists and craftsman came to Italy then went home to spread the creativity through their work.

Thomas Chippendale

We are used to seeing a Philly Highboy
and referr to it as Chippendale, but the soul of who Chippendale was, is reflected in the "eclecticism of his production" as seen in Chippendale's Director.
People watching along St. Martin's Lane in the 1750's, would have witnessed a revolutionary change in furniture manufacturing. The Chippendale company was not the only game in London but he was the saviest. St Martin's Lane was a magnet for talent and facilities employed 100's to meet the growing housing demand.

Chippendale's business acumen enabled him to do it better than most. His understanding of fashion within the decorative arts and an ability to hire well kept him in the forefront.

Above is the Harrington Commode.
A Chippendale design that in january 2011 under "Sotherby's hammer" fetched a whopping 5.9 million dollars to become the most expensive piece of English furniture sold at auction.

My hat's tipped and re-tipped to Thomas Chippendale.

Robert Adam

Now I know that Dorothy Draper fans will be annoyed, but it was Robert Adam long before Dot who was the first Interior Designer.
Robert Adam as architect created the space and as Interior Decorator created from soup to nuts, fabulous interiors.

In a previous post I had mentioned that you seek "good" interior designers. "GOOD" is defined by working with Interior Designers who create the entire room not just a piece. This was Robert Adam.

The piece at right is from the Chippendale shop, designed with and for Robert Adam. Look at the balance, the fine details of Adam and the execution of Chippendale. Just simply fantastic.

Let us not forget that it was Adam who brought the NeoClassical style to life which lead in America to the Federal Period.

Robert Adam the master of scale and space!!!

David Roentgen

The mechanical madman and cabinetmaker to Royalty.

David Roentgen grew-up in the family business. His father Abraham Roentgen apprenticed in The Hague, Rotterdan, Amsterdam, and London, and settled the shop in Neuwied, Germany.
There be built for the local princes and religous figures but it was David obviously well tutored, who spread the wings of the family business and created "the most spectacular chapter in the history of German furniture-making".

At right is a writing desk from the Roentgen work shop for the Archbishop and Elector of Trier. To appreciate, you need to investigate this piece thoroughly.

David Roentgen was called "the most celebrated ebeniste in Europe". It was his view of the international market at the time that set him apart. With cartloads of furniture Roentgen set up distribution in Holland, Germany and most importantly Paris where he sold to the Royals.

It was in Paris where the company fortunes turned. Paris is where he sold to Louis XVI and became Marie Antoinette's cabinetmaker.

With more to conquer beyond Europe, Roentgen loaded up the carts again and headed to St Petersburg, Russia where he landed as a client, Catherine the Great a luxury furniture enthusiast. Roentgen pieces are present today in the Hermitage Museum.

David Roentgen with secret compartments and latches to expose more secret compartments may not have been the craftsman of his contemporaries Oeben and Riesener but Oeben and Riesener did not conquer a continent. Who knows maybe Ingvar Kampar was inspired by Roentgen, after all for effeciency and cost, occasional pieces of Roentgen's were RTA long before IKEA.

The Shakers

Simple forms, "devoid of all that is useless and vain". Many will view Shaker furniture as the first example of modern furniture. This view is not construed based off an artistic form but rather the idea behind standardized parts that meet the highest production quality. A minimalist approach to and through the design process.

Althoug I have built entertainment centers in the style of Shaker, I am not a fan of Shaker furniture, but I do respect a good design when I see it and we've been looking and admiring it for over a century.

Heck lets not forget, the Shakers invented the circular saw. That alone has made our woodworking lives much easier.

Michael Thonet

With proper data, I bet one could prove that Michael Thonet's bentwood cafe chair Nr14 has sold more units than any other furniture design.

Thonet begain in 1819 specializing in parquetry. It was in the 1830's that he begain experimenting with manufacturing techniques. Bending wood to be specific.
By the 1850's under the company name Gebruder Thonet, Thonet and his sons were exporting around the world with manufacturing facilities throughout Europe. In the 1870's Thonet had established sales offices all through Europe, Russia, and the US cities of Chicago and New York.

Judith Miller in her book "Furniture" writes, "Thonet's legacy has endured well into the modern age - he precipitated Charles and Ray Eames's mass-produced office chairs, and of course the modern flat pack domestic furniture industry."

Micheal Thonet a manufacturnig genius who replaced joinery with the mechanical fastener and blew away the furniture world.

Hans Wegner
the chairmakers....chairmaker!!!

It's very obvious to see that Hans Wegner inspired many craftsman including, the style and production of Sam Maloof.

Wegner designing over 500 chairs, was about the design process from the craftsman perspective. I'll paraphase here, but "let the craftsman do what he can do in the design process and let machines do what the craftsman couldn't". Where Maloof stayed in craft-based production, Wegner took his into industrial design/production.

Having been exposed to Wegner back in the late 70's, while in a production environent, a lost thought in the US design community that I have never forgotten was Wegner's thought on the production process.
Bernsen writes, that Wegner stated,"you have to know exactly what a craftsman and factory can do. And also what they shouldn't do". Words to profitable design placement.

One last nugget associated with Hans Wegner is the approach to the design process. Wegner for 25 years participated in Design Competitions believing that one wasn't a "furniture designer" after 3 pieces but through cummulative participation, one nutured an understanding where, "Craftsmanship unites knowledge of material, construction, and process".

Hans Wegner.... the chairmaker's chairmaker!!-whose designs manufactured by Karl Hansen and Son are just as popular today as they were 50 years ago.

Robert Probst

Robert Probst was the director of Herman Miller's Research Division established in 1960. Probst's passionate mantra was "that the artist needed to be more involved functionally in society".

Probst research obsession became the white-collar work environment. His solution was intended to be "flexible and resposive to new ideas and changing opportunities". With the help of George Nelson giving the concept form, Action Office 1 was born.

Three years later the modular office furniture was refined and relaunched as Action Office 2.
Although cheap copies from creative wankers have given rise to the cubicle, Probst concept and ideas have changed the way a white-collar work environment is structured while creating a multibillion dollar segment of the furniture industry.

What probst learned was once the original Office Action layout was in place, nobody took the time to work the environment as it evolved.

As Berry quotes Probst, "Not all organizations are intelligent and progressive. Lots are run by crass people who can take the same kind of equipment and create hellholes. They make little bitty cubicles and stuff people in them."

Wendell Castle/John Makepeace

I know, I know.... I double dipped in the "Craft Revival" movement of the 1960's and 70's, but Castle from the US and Makepeace the UK, are true contemporaries. Both careers parallel and at individual strengths, diverge. Besides, I struggled with listing Arts and Craft builder Sidney Barnsley, arguably the first Studio Furniture Maker,(not Wharton Esherick) that I had to put Makepeace in the mix.

Where Makepeace is a woodworking technician, Castle is a sculptor of wood. I believe Makepeace
to be the more innovative with his "bespoke" wooden material, where Castle is more creative in deriving form. Both men have left their legacy in furniture design. No doubt Makepeace has been knighted and Castle is listed as one of the top 10 designers in the world, the only American to make the list.

Today both are still creating and most importantly still meeting show deadlines. I am a big fan of both men. In 1980ish, one of the early books I purchased for my library was The Art of Making Furniture, where both a young Makepeace and young Castle are featured in the book.

For those of you who think they are or want to be a Studio Furniture Maker, always remember, it is Castle
who brought high monetary value to the studio craft movement during the 1980's as he fought and continues today to fight to get furniture out of the decorative arts wing and into the Fine Arts wing of museums where perceived value is higher.

Ettore Sottsass

Although I timelined Sottsass at 1980, he's was extremely productive in the 1950's and 1960's as an Indutrial Designer. Long before Ives made the Ipod fashionable, Ettore Sottsass made the typewriter fashionable. The Valentine typewriter designed for Olivetti was a fashion statement of the time.

Sottsass always curious about numerous creative media, made his mark in furniture design in 1980-81, instigating and leading the Memphis Group in a Post-Modern effort.
After living with Modern Design philosophies since the 1920's, architects and industrial designers begain to question the "less is more" mantra in the 1960's. It was Robert Venturi's writing who looked for more and spoke of "less being a bore". It was Sottsass who looked at decorative objects as an opportunity to seek possibilities not solve a specific design problem.
Radice writes that Memphis "is concerned above all with breaking ground,extending the field of action, broadening awareness, shaking things up, discussing conditions, and setting up fresh opportunities."
Of course new technologies at the time enabled a new "sensory concentration" when viewing the assembly of various materials in all sorts of color, inventive graphics, and geometric shapes and sizes.

You don't have to look far to see the impact that Memphis had on the US Studio Furniture Maker, look at Gary Knox Bennett's work "Colorcore Desk" 1984 and Memphis designer, Peter Shire's "Peninsula" table 1982. Knox was obviously inspired by the freedom Memphis allowed. You even see Memphis in Castle's 80's work, but at least he acknowledges Ettore Sottsass. Look at Tom Loeser, same thing, Memphis with subdued color tones. The list goes on with investigation.

I will argue that the Memphis group is the last defined historic furniture period we have had and brought to you by Ettore Sottsass. For me personally, it was an absolute plessure to have caught on to Memphis, lived in its time and built in its philosophy while others of my age group got fogged by Krenov.

For those of you searching for why you DIY and want more out of the craft of furniture design, a personal intellectual investigation into the Memphis group will be awakening.

Well there you have the 10 Most Influencial Furniture Designers. Who are your influencial designers, and more importantly WHY?

Looking at Furniture Opportunities

noreply@blogger.com (Neil....a Furnitologist) — Wed, 16 Nov 2011 20:15:00 +0000

I've been at this game of furniture design and manufacturing for over 30 years now and have faded "Polaroid" photo's to prove it. I've had my successful runs and recently I've been looking back on the opportunities that presented themselves.

Like some of you today, my first look 30 years ago, was to work the craft show scene. Although the craft show circuit was more vibrant then, the opportunity to "make a good living" was suspect at best. Yes fun, more in the hobby realm, gas money, good exposure, extra cash for another tool, all positives but as an opportunity to make a living and accumulate wealth, the craft circuit would not provide that opportunity.

But what would be the furniture design opportunity to make a living???

Could a gallery be the opportunity??? Could working the Studio Furniture Maker be the angle to opportunity????

Maybe, so I headed to Pitman and Eames early on when they showed Castle and Krenov. I was familiar with both and wanted to see their work first hand, but the gallery scene didn't stir the juices. The idea of one or two owners determining the value of your skill set has never made sense to me. A gallery owner such as Peter Joseph may have an eye and make you money but why limit your opportunities.

So now where was the opportunity to "make a good living".

Coming out of a large manufacturing facility, my skill set would work perfect with a small crew for short production runs of high-end residential case goods. Wha-La!!! OPPORTUNITY!!!!

On that route, I've placed work in the upper east side of Manhattan, all through Long Island from Sands Point to the Hamptons and neighborhoods in-between. The real key was building on that Opportunity of residential case goods and placing pieces in the NYC Design Center at 200 Lex, producing a line that fit the small upscale furniture boutiques of Nassau County, understanding how a sales rep ticks, and squeezing in the work of good interior decorators.

Opportunity comes in funny packages and here's one that I will always remember. Through an interior decorator, we landed a big job in the 5 acre estates of Oyster Bay. The client, a rather wealthy bloak, said lets go for a ride. AH..... my opportunity to ride in an ivory colored Bentley Corniche convertible. The idea behind the ride was to inform me of the incentive to payment and exactly where as we pulled into the parking lot, I would purchase all finishing materials for the job.

Opportunity in furniture design today is different but it still exists. WoodExpo2012 is just that, an opportunity for those serious about making a difference in furniture design and manufacturing. WoodExpo isn't an opportunity to talk about sandpaper grit and what bandsaw you own. Its about finding a synergy with other craftsman and talk business.

WoodExpo2012 is an opportunity to Bust Down the Door and find our way back into the consumers thought process.

Like I said, Opportunity comes in funny packages, but you have to be open and ready to expand the opportunity. WoodExpo2012 is that start!!!!

WoodExpo 2012 - Call for Entries

noreply@blogger.com (Neil....a Furnitologist) — Thu, 02 Jun 2011 19:16:00 +0000

WoodExpo 2012 is again on track for another fantastic Woodworking event. Here you'll be introduced to the event and its Call for Entries. WoodExpo is about providing the opportunity for you to present your work.

This video explains the two categories of entry and stresses the objective of mixing experinece with up and comers.

Have a listen, hopefully get inspired and be a part of WoodExpo 2012.
Here's the Rules and Eligibility.

ICFF 2011 - a future Trend??

noreply@blogger.com (Neil....a Furnitologist) — Mon, 23 May 2011 19:46:00 +0000

The International Contemporary Furniture Fair, a show I have exhibited in is usually a happening I’ll make time for each year. Especially since I’m of the belief we can walk the edge more in American furniture design. Well with that said, each year I look to see if any designer has balls.

This past May 17th my focus was two fold. One was to investigate digital printing and how to apply the result to furniture. And two was to see if I could pick-up on any potential trends.

Just a bit of background to begin, this past March I had attended the NY Architectural Digest Home Show and came upon printed faux shagreen. This made my first mission at ICFF to look for that same exhibitor. Unfortunately I’m still looking, I wasn’t into the show 3 booths down my first isle when I stopped and to my right saw real shagreen. A company hailing from Paris, France called R&Y Augousti is laying shagreen. Real shagreen and with that sighting, my digital printed faux focus was lost. For those of you not familiar with shagreen,
here’s a brief description.

I have a building history in finishing with skins, but today I’m torn as to using skins in furniture, there is no need to use for instance goat skin, it’s a great faux lacquer finish, but true shagreen, man that has me. Once you see and feel the real thing, digital printing just doesn’t compare. It’s a luxury item that R&Y Augousti believes is back big. They just opened suite 419 in the NY Design Center. Interesting.

As for the trends, its about the crowd. At trade shows, when I see a crowd, I stop. I don’t care what is in the booth, I just stop, observe the crowd, and listen.

If you are a follower of this blog recall back in May 2008(6 minutes in) my mention of lighting as a under served market, well its now being served. I think it was Yogi Berra who said, there is so much lighting, nobody stops to look anymore. The trending color in furniture, wall coverings, and textiles not surprising is some variation of “Honeysuckle” - PANTONE 18-2120.

The possible opening to a future trend in furniure design is pattern, texture, and color. These are three design elements I’ve already been addressing, hence my original reason for going to ICFF: to apply digital printed patterns, texture and color to furniture. What I saw in pattern and color in wood that drew a crowd for instance was a v-match veneered pattern in different colored woods and reconstituted stone. The objects were interesting but way to time consuming and a bit immature in pattern. Applying that to myself, my pieces are mature in pattern but too time consuming. Again my reason to investigate the time saver of implementing digital printing.

I see room like I once did in lighting if you want to be a part of creating the next trend. So think about how to apply pattern, color, tonal range, and texture to your work. No easy feat!!

Shown pieces in photo's by:

Gabriella Azlalos ------- Li-Rong Liao ------ Richard Schltz ------ UM Project

WoodExpo Delivery from France

noreply@blogger.com (Neil....a Furnitologist) — Tue, 29 Mar 2011 01:18:00 +0000

Late February 2011, Tommy MacDonald hosted the WoodExpo in Boston Massachusetts. The event was quite successful even garnering the title INTERNATIONAL WoodExpo when a perfectly executed entry arrived from France. Come and take a look at an object that worked the design process from form to construction to packaging and distribution. This magnificent entry from Ronaldo Messina living outside of Paris was just what the WoodExpo needed and is all about. Enjoy!!

BUSY!! Haven't forgotten Saw Dust Challenge Table

noreply@blogger.com (Neil....a Furnitologist) — Tue, 25 Jan 2011 13:02:00 +0000

The saw Dust Challenge table and video series has gotten caught up in other work. I haven't forgotten, just had to move it off to the side of my plate for now.

I'm extremely intrigued and caught up in a rather complicated piece for the past 5 weeks. I'm trying a new technique and the results are what I expected. They are good and show loads of potential. Working the machines well, is working the machines. What is making this piece complicated is the veneer selection being used and the layout. Or simply said, the design constraints I've placed on myself.

Over the past 20 or so months I've been engrossed in the study of form and communicating visually. The study has taken me away from viewing furniture and more into color, textiles, graphics, varying center points, on and on. I have my reasons. But combining a new form with sound visual communication is where I'm headed. I've expanded my knowledge base but at the expense of my viewers. Sorry about that, but down the road there's more to share with you. You may have heard me say often, "I don't like going backwards, I like what's in front".

When completed I will get back on the Saw Dust Chronicles Challenge video, and fill you in on this piece.

Stay tuned.....and check back at the end of February 2011 as I go after what is turning into a fun project.

All projects build off of what you've built before. Much of what I've been experimenting with this past 20 months, keeps showing up.

Quite an interesting process for me.

In the infamous words of General Douglas MacArthur......... "I shall return".

Start Woodworking - Dry Assembly - Part 9

noreply@blogger.com (Neil....a Furnitologist) — Sat, 27 Nov 2010 03:17:00 +0000

Start woodworking by entering a build challenge. One such as the Saw Dust Chronicles Build Challenge and this is Part 9 of playing in a build challenge arena.

When you begin to woodwork, it can get confusing, but as part 9 shows, you do not need many tools to accomplish building a furniture object. We go through attaching our stones, yes to encourage a design option, I went with the stones, and dry assemble the entire base. Personally this approach I decided on has brought me back full circle to where I started woodworking with limted room and tools. Building this project for Rick Waters' Saw Dust Chronicles build challenge has really got me thinking about how woodworking is presented and how limted the internet presentation is.

Enjoy---- sit back and watch the design of our small table come to life.

Part 9 has really got the wheels spinning on another design based off this prototype.

Start Woodworking - Shaping Parts---Part 8

noreply@blogger.com (Neil....a Furnitologist) — Fri, 05 Nov 2010 18:40:00 +0000

To start woodworking, we've hooked-up with the 2010 Saw Dust Chronicles Build Challenge. The challenge has prizes galore, so what better way to improve your woodworking skills while at the same time picking up a woodworking prize.

The Dewalt router kit has me inticed and my prize of choice but since Tommy MacDonald of the TV show Rough Cut Woodworking with Tommy Mac, has enabled the winner to show his work at the 2011 WoodExpo, thats the real prize. Heck Glen Guarino and Allan Breed are going to be actively disussing woodworking there. One's a traditional craftsman, the other a contemporary builder. Exposure to that combination is rare and worth the price of admissions.

In this episode, we finish up dimensioning parts. We'll take it further and shape our table base parts, going through the building of a fixture using shop scraps and toogle clamps. Touching on that elusive and important router kit, we'll address collets and router bit shank size and discussion why a half inch shank at times is better suited than a 1/4 inch shank router bit. Assembly is next so be ready with that affordable dowel jig, you'll be impressed with what we build with a limited tool box.

A simple workmate bench and a flat surface is all the bench we need.

Enjoy!!!!

Begin Woodworking - Milling Wood Parts - Part 7

noreply@blogger.com (Neil....a Furnitologist) — Tue, 12 Oct 2010 21:06:00 +0000

So how do I look in my Zem Headphones by Sensgard. I can't hear you!!!

Actually we'll need hearing protection as we take to the table saw and I show you an approach to squaring lumber with our limited amount of tools available in the shop. Remember we are using (according to Part 1) Table saw, Sabre Saw, electric hand drill, chisels, dowel jig, block plane, workmate bench, sharpening equipment, router kit, and not much more. You don't need a shop full of tools to produce beautiful piece of furniture.

In Part 7 we dive into milling with the table saw, showing you just one of 3 approaches to milling with limited tools. After milling we go through the process of gluing up the top. Watch as we get a real good figured walnut surface for the top.

The Sawdust Chronicles Build Challenge is almost over and we have to be ready for the rest of the Sawdust competition. There's got to be a prize in this for me somewhere. Well I'm a judge and not eligible for an award. Oh well, the reward is seeing the craft grow. I can't wait to see who shows up to represent the Sawdust Challenge in Boston at the 2011 WoodExpo.

Beginning Woodworking: Laying out Parts -- Part 6

noreply@blogger.com (Neil....a Furnitologist) — Tue, 05 Oct 2010 16:04:00 +0000

Come on in woodworkers, there is a nice surprise for the entrants of the Sawdust Chronicles Build Challenge. Thanks to TV personality Tommy MacDonald of Rough Cut Woodworking with Tommy Mac somebody gets a nice opportunity.

In part 6 we build on our sketching skills to help visualize our parts layout. We emphasize the use of a work bench and create a simple, but necessary work surface. You'll learn to read a board and bring in and use the sabre saw. We'll stress safety from a different part of your shops work flow, and see how rethinking an approach is crucial to an objects design.

We end with our parts rough cut from our walnut stock ready for the table saw.

Beginning Woodworker Part 5 - Sketch and Drawing

noreply@blogger.com (Neil....a Furnitologist) — Fri, 10 Sep 2010 17:22:00 +0000

Click to Play

Here we are at Part 5 of the Beginning Woodworker and competing in the Sawdust Chronicles Build Challenge.

We take to the Design process, stress the importance of sketching and discuss to bring; the manufacturing process and full scale drawing together.

The fact that most thinking should take place before machining is discussed.

Beginning Woodworking-Part 4 Sawdust Challenge 2010

noreply@blogger.com (Neil....a Furnitologist) — Fri, 03 Sep 2010 03:51:00 +0000

Part 4 of the Beginning Woodworker takes us to the place where woodworking prizes can be won, the third Sawdust Chronicles Build Challenge. The start date is September 1st ending with a submission date of Oct 31, 2010. Sponsors of the challenge include Rockler, General Finishes, Kreg Tools, Dewalt, Popular Woodworking, Michael Dugan, a 1 year subscrition to British Woodworking magazine and much more. Its not to late to sign-up, cut off date is September 15th. This episode takes us into the constraints of the build challenge and makes you aware of 2 furniture designer's who's work we can draw inspiration from Gerrit Rietveld and Alan Peters. Take a look and come for a ride into a beginners look into an internet build challenge, created by Rick Waters of the Sawdust Chronicles.

an odd Furniture Finishing reminder

noreply@blogger.com (Neil....a Furnitologist) — Wed, 04 Aug 2010 14:43:00 +0000

Last week I read were Jennifer Convertibles had filed for Chapter 11 Bankruptcy protection. When you've been around the industry, seeing a furniture company restructure is not uncommon. But Jennifer Convertibles hit a bit closer to home.

It was roughly 20 years ago when managing a custom shop, that I made a decision to change direction and sell the shop to Designers and Sales Reps by emphasing the finishing capabilities of the shop. When I saw that Jennifer Convertibles had financial issues, the "silver cloud finish" floated over head.

The "silver cloud" was one of the finishes created by Bob D. at a time when the shop needed a win. It was used on a Wall Unit, in the home of a head honcho at the time of Jennifer Convertibles.

Having just arrived in this shop and understanding how people hate change, a different direction was going to be hard for the floor to digest. This was compounded by bringing in the best cabinetmaker to this day I have even seen as foreman. Adding more to an already unsettled shop floor.

It didn't take long before Paul C. won over the floor as foreman. I knew he could do it. While in Grad School, Paul was Foreman at a Custom Shop where on my off-school days, he would have me cut to keep the benches working and assemble when needed. To this day I am greatful for how he handled me.

So now lets bring in Brenda K. Brenda was at the time just starting to get high profile "neighborhood" jobs. She wasn't just a decorator, she was an Interior Designer. Brenda took the job from a framed space to a finished room. Not unusual, but Brenda had exceptional vision, good room communication skills, poor furniture design skills. The only thing I could say was, "do I have the shop for you".

We worked through the design of a 15 to 18 foot, floor to ceiling wall unit, complete with wet bar, projection screen, doors sliding on construction pocket door hardware, pullout pier cabinet storage, wire chases, speakers, amps, glass, wall dimmed high-hats, the whole nine. The unit was magnificent all finished up in the shop's custom "Silver Cloud" finish.

The decision was to install this one with a team of 3 and as the cabinetmaker's, along with an electrician to wire the unit and plumber for the wet bar, we were the last to install. Mr. and Mrs. Jennifer Convertibles were expectantly on the anxious side. The install went without a hitch even with working on top of custom inaly carpeting and just as if it were yesterday, when tip time came and the moneyroll of a happy customer came my way, I remember calling Paul over and having Mr Jennifer Convertibles make Paul the focus of the shop's work. As happy cabinetmakers we all headed out when I got a holler to come back, wondering now what, I was greeted with a personal business card, a personal thank you, followed by "call me". 30 years and counting, that was the biggest tip I ever got.

Sorry to see the financial stress that Jennifer Convertibles is going through, but I preferr other memories of this company and its early management.

a Rough Cut--- Woodworking story

noreply@blogger.com (Neil....a Furnitologist) — Mon, 26 Jul 2010 12:49:00 +0000

Thursday- July 22, 2010: I left the Island but the call came Tuesday evening.

I knew I was in trouble when I asked what I needed to wear and the answer was a tu-tu, one like Magilla’s.

I’m the lesser half of a caregiver team so a few of my responsibilities had to be addressed before I could take off. With that done, I was good to go. As I told David Pruett of the Folding Rule blog, you have to be very nibble when “the call comes”.

But what phone call and from where……….????

That next morning Wednesday July 21st, I cleared up my phone calls, e-mails, did a quick visit, jumped ahead to a glue-up that could stand for a while, and at 6:30 pm went flying out to purchase some nice T-shirts. I was told to get a few different colors. Knowing darker colors suits me best, that’s what I went for. A Furnitology-T was not in the mix.

While all this motion and thinking was going on, a photo essay came to mind so extra batteries were needed. Since I live on an island, I needed ferry reservations so I took care of that.

I was set to go.

As I tidied up to leave Thursday morning, the phone rang. It was one of the young guns of woodworking who I will always make time for Justin DiPalma. We’ve traveled a few times to Boston together and he’s on the WoodExpo planning group:

“Hey……what’s up!!! Typical Justin….. “Nothing”

After a few laughs, you coax out what he has cook’in. He’s all excited about having met a guy who has access to backroom area’s where furniture sits; waiting to be re-visited. As part of the approval process, he needed to present his work, which not surprising, was received well. Justin is self taught, very talented, and quietly going about finding his place in woodworking. He knows the importance of the inspirational access he’s worked to put himself in. Justin won’t say that, but you can hear the excitement in his voice.

Now between hearing about Justin and his backroom coup and being already excited about my adventure, I’m was ready to fly Peter Pan style to my destination.

I loaded up my van and headed to the ferry terminal. Oddly enough my ride had me thinking of Rick Water’s of the Saw Dust Chronicles, his Fall challenge is coming up and he had the honor of riding the rear wheel well on our trip to a SAFM meeting in Connecticut. Without a complaint I might add.

The van loads onto the ferry with the other commerce, funny that I was headed to Boston (oops) and I’m riding with an empty Downes and Reader truck who had just dropped off 8000 bd ft of white oak in Calverton, Long Island. Woodworking on an island is different than working wood on mainland USA. Moving materials is expensive and we have no selection of hardwood, so you learn to travel off Island to select your own hardwood or for economic reasons you move to veneer and get to be good friends with Mike, the UPS driver.

My ferry ride was thoughtful as I tossed around the idea of an essay on the navigational hazards

of woodworking on Long Island. But settled on a more generic woodworking topic that wonders where this current generation of woodworker is going. The laptop got a workout for a while but Thursday (July 22, 2010), the Northeast weather was a 10.5 so I leaned on the port rail

and took in a cool summer breeze as we fetched the waterfront entrance of New London, Connecticut.

I know now why I’m a bad blogger; with this photo, my photo essay ends. But my trip to New England isn’t even half over. After exiting the ferry and getting on I95, I was all business as I headed to Tommy MacDonald’s shop. Others can do it, but I find my focus is such that, taking another photo on this trip never entered my mind.

Sorry………but its verbiage from here.

The call I received late Tuesday evening was from Tommy MacDonald and he asked me to be on his next episode of Rough Cut Woodworking with Tommy Mac to be shot Friday morning July 23rd. The episode has to do with a desk Tommy has had his eye on for a while in the John Adams house and the veneer work involved.

So I was on my way………….wouldn’t you be too.

I’ve been at woodworking long enough that I only need to hear a furniture topic, put it into a time line and I’m golden. In this particular case I could have taken a bellflower back to Fra Giovanni and stringing to wall paper prints by Lucienne Day.

I reached Tommy’s shop after a slight mistake of thinking I was in Canton when really in Sharon, Mass, but as I learned from Justin on earlier trips, if you don’t stop moving, you’re never lost……….he was right again.

Eli greeted me at the door and it was like we saw each other just yesterday, Eli is another young gun who is quietly making his way with a twist. A cool twist I might add. His woodworking/furniture design story in 30 years should be a great one. It’s leaning toward that special side already. He’s the main thrust of the 2011 WoodExpo having played a more pivotal roll in 2010. He’s also plays a very important roll in Tommy’s TV production.

On entering the shop we had a bunch of laughs, but I’m aware I’m hindering preparation so I take off with my blue spiral note/sketch pad to Pete’s Place in Canton for a couple unsweetened ice tea’s and stir the noggin a bit for tomorrows (Friday-July23rd) shoot. I saw the veneer work was a V match and it reminded me of Giuseppe Maggiolini and since the episode would star the desk in the John Adams house, the Kings Desk of Louis XVI by Riesener came to mind, I was in Pete’s Place but really in my own furniture fun. I took notes so I had reminders.

I left Pete’s and went back to the shop hung out for just a while longer, then split to get some rest. Plus prepping was still underway and I didn’t want to interfere.

Friday morning came fast and before long, I was back in Tommy’s shop and was greeted with a huge smile from Al. Tommy and Al have a very special friendship and their banter is fun to be around. As the WGBH production crew began to show up, I remembered Laurie and Anne from last years WoodExpo, Dave Masher from way back in the T-Mac journey and met Dino the cameraman. That was the slowest the day would be……….OH I almost forgot, I went to make-up too.

From 8am to 7pm it was non-stop as Laurie would say…”ACTION”. Tommy is really disciplined about shooting each sequence of shots. I noticed Tommy and Laurie communicate in a unique fashion, much of it is in tonal expression. Dino is amazing at remembering the last shot, the hand positions and out from the back room where Anne watches and types dialog, will question terminology and remembers that a term used at 10am is the same term used at 5pm. Steve Brown from NBSS is the technical advisor and Laurie will check machine set-up and safety until it is exhausted and she is happy. In between all this production talk, Eli is either at stand still or 100 mph. Laurie is the producer of the show and reminds me of an Interior Designer. She has the ability to visualize the sequence of construction in her head and the savy to present it to the client or viewer in this case. It was powerful as I watched the show be shot. Laurie sets the pace, Tommy works to get it for her, Anne keeps Tommy on topic, Dino moves between close-up, wide and numerous angles and it works. You can feel the wavering emotions of the room.

Sorry there are no pictures, but I was working.

As for my job, I never got the chance to mention Fra Giovanni, but he didn’t fit. On returning to my motel Friday evening, I was exhausted. I feel asleep for about 2 hours, then couldn’t sleep as I rehashed what I said, what I should have said, questioned if my performance provided material, and did I do what was needed. During shooting, Tommy told me to relax, think of it as a podcast, but that’s easy to say and hard to do.

I left real early Saturday morning to catch the ferry back home. I didn’t get to see Tommy and Eli before I left, they had an 8am production meeting……they shoot again Monday July 26th.

As I think about my day in the life of Rough Cut Woodworking with Tommy Mac, I’m so glad I took the time to peel back the many layers of a very talented, big hearted guy. Tommy MacDonald had a vision very early on that only a small number of internet woodworkers understood. I’m very appreciative to witness it come to fruition. And now to be a part of its early history is a wonderful feeling.

Thanks for the book Eli and Thanks again Tommy!!!!

Beginning Woodworking Part 3 - Finishing DVD Critique

noreply@blogger.com (Neil....a Furnitologist) — Tue, 13 Jul 2010 17:38:00 +0000

Adding to the beginning woodworker series, here's part 3.

I critique a new finishing DVD produced by Popular Woodworking Magazine.

Have a listen and begin to think about finishing as a seperate skill. A skill ; needed to be a successful woodworker.

Begin Woodworking - Part 2 Sharpening

noreply@blogger.com (Neil....a Furnitologist) — Tue, 11 May 2010 18:19:00 +0000

If you are going to begin woodworking, you'll need to have the ability to sharpen your tools. New chisels and planes do not come ready to use out of the box. Part 2 of Begin Woodworking, gets you started into sharpening. Water stones cut faster than oil, and between the diamond stone, and 2 Norton water stones I show you, sharpening is just an edge away. Jump in and if you have any questions contact me at askneil@furnitology.com Life is fun when you can make stuff, especially out of wood.

Get Started with Woodworking - Part 1

noreply@blogger.com (Neil....a Furnitologist) — Mon, 10 May 2010 17:15:00 +0000

With the Fall Building Challenges just around the corner. The beginning woodworker should be taking advantage of the sponsors schwag. With minimal tools to get started and the right designs, getting involved in a wonderful craft is easy and more imposrtantly, rewarding. This is part 1 of an series that will introduce the new woodworker to getting started in the craft. 3/4" - Surfaced 2 Sides(S2S) material is all you need and the proper aproach to create the most aesthetically pleasing object out of your material. Come along for the ride and maybe you too will add woodworking to your personal resume.

Formats available: Quicktime (.mov)

Justin DiPalma: Growth of a Craftsman - 2010 WoodExpo -Boston, MA

noreply@blogger.com (Neil....a Furnitologist) — Wed, 14 Apr 2010 13:31:00 +0000

David Pruett of the Folding Rule Blog, shot this interview with Justin DiPalma. Having met Justin three years ago during a road trip to Tommy MacDonald's shop, I recognized his approach to working wood as one that leads to superior growth. I decided at the time that I would follow Justin's work.

Since we first saw Justin at the 2008 Wheaton Arts and Craft Fair, he has returned to the Wheaton Show, exhibited in a local Gallery during the 2009 Thanksgiving to New Years Holiday season and now has produced a new piece for Tommy MacDonalds WoodExpo held at the New England Home Show.

You will also see the slant top desk Justin showed at the 2009 Wheaton Show.

Enjoy and see the growth in a Craftsman.

Kaleo Kala at the Architectural Digest Home Show

noreply@blogger.com (Neil....a Furnitologist) — Tue, 30 Mar 2010 16:39:00 +0000

Click to Play

Enjoy this video as Kaleo Kala takes you on a personal tour of his booth at the 2010 Architecturl Digest New York Home Show. Having followed Kaleo's woodworking through the internet as many of you have, I felt it a great opportunity to met Kaleo and give him the opportunity to show us his work in a professional environment.

Formats available: Quicktime (.mov)

Furnitology Stuff

noreply@blogger.com (Neil....a Furnitologist) — Thu, 28 Jan 2010 19:47:00 +0000

In this episode we'll play a bit of catch-up, tying previous episodes together and what's coming up. We'll mention the new DVD from Major League Woodworking, woodworking places I've been the past few months, and where you can find me on the web to learn a differnet view of woodworking.

Why Woodwork

noreply@blogger.com (Neil....a Furnitologist) — Sat, 02 Jan 2010 14:21:00 +0000

So George a very good friend of mine decided that during this holiday season, we would build a toy together for a charity organization. At the same time, I would be fulfilling a requirement for being a judge in the Saw Dust Chronicle 60 Day Challenge, arrange by Rick Waters.

The "Red Baron Flier" was the toy of choice. George who I don't see nearly enough is a very curious bloke. He dove right in with no complaints about the 13 hour first flite to building the fleet, and even insisted we start earlier then I wanted the next day. Together we got 90% completed in 2 days, attaching the tail section and finishing was my chore. In those 2 days of building, I had forgotten how much George and I laugh together, we are polar opposites that click. Seeing him get excited while machining a part and how proud he was of each assembly was just simply fun to watch.

George arranged for a Dec. 23rd delivery of our Fleet to the Pediatric Wing at Stony Brook University Medical Hospital. A difficult but at the same time, wonderful experience. That's all George. I love to laugh but I found myself hesitant at times.

Here's a picture of Grace and her Mom..........George asked why couldn't Grace aspire to be Amelia Earhart.

One reason Why we Woodwork!!!!

Woodworking in America - an approach

noreply@blogger.com (Neil....a Furnitologist) — Wed, 15 Jul 2009 18:23:00 +0000

I believe that Popular Woodworking's Furniture Construction and Design Conference can lead to a big pay-off for the home base woodshop.

This particular conference enables the home based woodworker to be exposed to a multitude of furniture form. It is important to establish the home gamer in an environment where the internet woodworking movement can be evaluated and critiqued. This conference is the first setting where creativity rather than "how to..." will be addressed.

Observing how the conference is being advertised, one point lacking was to present an approach that an attenddee might use.

In full disclsoure, I will not be attending the conference but believe it could possible be extremely beneficial to the internet woodworking community longterm and want to support this conference as best I can.

Formats available: Quicktime (.mov)

Sam Maloof - more than a rocker

noreply@blogger.com (Neil....a Furnitologist) — Wed, 27 May 2009 00:45:00 +0000

I received a call the other day.
It was a woodworking compadre who nonchalantly said,
“Well we lost one of our greats”……I had to ask who.

Over the past months, I’ve been cleaning up loose ends, roaming happily lost in my own direction, and checking in on the internet woodworking community only on occasion.

But when the who was answered, I was sad.

I clip articles of great performance and place them in my favorite books. I went to my copy of Sam Maloof – Woodworker, (first edition 1983) and was not disappointed. Having worn out his VHS tape “Sam Maloof, Woodworking Profile” like an old 45, Sam Maloof is one of my favorite woodworker’s. I can still picture him following that one hard line around an entire chair. But whose performance earned the right to be in my Sam Maloof book? More on that later.

It’s Sam’s book and it’s his day.

My woodworking foundation is firmly in furniture manufacturing. While working at Broyhill on the industry’s shop floor, Gigi and I also worked the craft scene at the tail end of the movement. This is the connection for me to Sam Maloof. I had the best of both worlds, first hand exposure to furniture designed for the masses and the study of Maloof’s approach to pieces designed for limited-production. To me, I saw no difference in the production at Broyhill Furniture Industries and lets call it, Sam Maloof Industries. The only variable between the two was what percentage came off the machine. The higher the production volume required, the higher the machine percentage needed. Finding the design balance between machine and handwork was Maloof’s genius.

Sam Maloof, was instrumental in exhibiting the production of fine wood craft. Recently, I received a note from Jon Binzen a writer of all things furniture. He commented on the Castle and Kopf interviews by saying, “The one with Silas brought out his personality remarkably well….” the reason for this comfort level between Silas and myself, has much to do with the craft movement. Maloof having been a part of the California Design exhibitions, masterfully showed studio furniture next to production furniture. Remarkably, Maloof and Eames showed in the same California Design Exhibits. Maloof showed in the yearly CD exhibits from CD 1 in 1954 to CD’75. Rhinebeck was the major east coast Craft Show and Silas Kopf was a player in those exhibits. The scene peeked mid to late 70’s, and as mentioned previous, Gigi and I hit the tail end, but the attitude, the lifestyle, the vibe is evident in those who participated. The Craft Show era is over and the closest example to those exhibits today is the ICFF, but you have to have been aware of what was showed in the CD exhibits and Rhinebeck to appreciate this vestige of Maloof.

Unfortunately, it seems everybody just stops at a Maloof rocking chair and feels the inspiration. Sam Maloof is much more than just a rocker. He provided the vision of limited production and finding optimal furniture designs to manufacture. For me, through self study I came to profit margin terms and the manufacturing understanding of what can be built within the confines of a 40 - 48" X 15 - 21 X 30 - 34 rectangle, that’s what I learned from Sam Maloof. That’s his genius, I just wish somewhere we could find a quote where he mentioned out loud, that he had to meet a production quota. If he did, I believe American woodworking would have a different look today.

So just who is it that resides in my Maloof book. One was a 1992 article from the New York Times Sports section on Vitaly Shcherbo. My expectations are very high, so it seems logical now that Shcherbo, who won 6 Olympic Gymnastic Titles at the Barcelona games, was folded neatly in Sam’s text. Life is all about performance.

The other article was from a 1983 issue of Time magazine. Under “Milestones”, it was an obit piece on the death of R. Buckminster Fuller.

I only had to look to my right and see my Spaceship Earth Dymaxion Globe.

Here’s to Sam Maloof and thank you!!!!!!!

Listen to NPR Maloof link sent to me from my Design Professor of 30 years ago, Mr John Belt.