Furniture Assembly Service & More Blog

Things too big to be assembled in tight spaces!

2010-02-08T20:29:00.001-08:00

I appreciate that we are all trying to maximize our space and choose items that may fit in a cramped space but offer a huge storage solution or solve the problem of tight spaces such as wardrobes or platform beds. However, quite often the assembly step for these products is overlooked and the space does not offer adequate room to build these items. A great example is the Elga Wardrobe shown below. In all these solutions some extra thought has to be done in the planning phase to determine if you can build the product in the space provided? A tape measure is the #1 tool to employ to solve this problem.

Common products that fall into this category are:

KEA Mondal Bed Frame -

I understand why this is a desireable bed, but it has a length of 6' foot x 5' foot, however the three instances that I was presented to assemble this bed were for rooms that were 7' foot x 6'. The drawers need 2 feet on each side to slide out and you really need 3 feet to get the drawers in because they are just about half the width of the bed.

IKEA Elga Wardrobe -

These are choosen by individuals who have a fully furnished bed room and then need extra storage, however there is never any consideration of the space needed to assemble it on the floor. This presents a huge problem. The cabinets can not be moved from room to room and need to be assembled on the spot or at least within a few feet of where they are to go.

IKEA Pax Wardrobe -

Usually the 7' foot 5"inch units are choosen for ceilings that have 7' foot 8" inch ceilings (need to be assembled vertical instead of the better way of on the floor and lifted up.

IKEA Elga Wardrobe

2010-02-08T20:12:00.000-08:00

The new IKEA Elga Wardrobe storage solution is a great choice for inexpensive and fast storage.

The two cabinet unit is fairly easy to assemble, but you need to be sure you have enough floor space to assemble it. The height is seven (7') feet and you will need 9' feet x 7' feet to comfortably manuver around and be able to build the unit.

The three door, three space unit requires the same 9' feet in length and an additional 11' feet to comfortably move about the unit to assemble it. If you dont have that space, dont bother with this unit, you will be nothing but dissapointed and frustrated in trying to build it! Better solutions would be an Aspelund, Aneboda, Engan, Edland, Eina, Hosle, Kullen or Mandal solution.

Things to know about IKEA and IKEA products!

2010-02-07T19:46:00.000-08:00

There are some things that the novice should know about before going to IKEA.

(I will probably add to this as I recall different experinces at later dates so check back from time to time)

1. All IKEA stores are managed independently - what does that mean to you? Well the most important point is that if you make a purchase from one IKEA and you open a product and there is damage or parts missing you can only take it back to the IKEA warehouse it was purchased from for return or exchange. Competitive IKEA stores in a market don't want the return.

2. You must have a receipt for exchange or refund - This matters mostly for deliveries. If you receive and item mis-delivered to you through Urban Express on the east coast, more than likely that item is a gift to you since Urban may or may not come back to retrieve the item and IKEA will not take it back without a receipt. You might be able to call the individual whom it was to be delivered to through the info on the label, but this usually only shows an address and not a telephone number.

3. IKEA Pax Wardrobes really need One (1) person to build them! - Yes, it is true, if you know how to do it these require one person to build contrary to the assembly pamphlet included in the package of a Pax frame and the info on the IKEA website. The process they lay out and recommend to assemble often results in anchors tearing out, frames out of square and basically and assembly headache. Unless the ceiling height of the space is 5" inches or lower than the length of one of the frame side panels stood on its end, the best way to build these is on the floor into a box and then lifted into position. This guarantees the best possible assembly and the least amount of hassle.

Sorry for the delay, we have been busy!

2010-02-07T19:34:00.000-08:00

Since December 24th (Christmas Eve) we have been busy, very busy with Elfa projects through our relationship with The Container Store and thier anual 30 % off sale. The Container Store has upped the antie by offering 30% off the installation as well. The sale ends on February 15th so the time is now to get in and get a great deal on some Elfa and an installation. We even remove up to two shelves and a rod, patch and paint the disturbed area from each wall that new Elfa shelving is to be installed. Stop into any one of the three Container Stores in the North Jersey, New York City area and work with a Container Store Designer Today!

Review: Assembly of IKEA Norrsten Cabinet

2009-12-09T16:15:00.000-08:00

The IKEA Norrsten Cabinet is an excellent choice for storage. It has four spacious compartments that can be divided with the four shelves included to accomodate books or other media. The cabinet also has two drawers in the bottom two sections.

Assembly is actually broken down into a serveral step process; Cabinet, Metal Base Frame, Doors and Drawers. The overall assembly takes a bit over an hour for an experienced person, novice can find themsleves taking a little longer. These cabinets sell for $399 at IKEA warehouses and we install them for a flat rate of $75.00 per.

Review Rating:

Style:4.5

Assembly Ease:2

Quality:4

Value:4.5

My short list of the most difficult IKEA items to assemble!

2009-12-09T15:56:00.000-08:00

These are a list of the most common items sold at IKEA that I generally get called to assemble. Each has its own set of difficulties and tricks to build them. This list is not in any particular order, but it does span the scope of the most common items.

1. IKEA Pax Wardrobes
2. IKEA Pax Wardrobe Sliding Doors
3. IKEA Malm 6 Drawer Dressers
4. IKEA Hemnes 8 Drawer Dressers
4. IKEA Expedit Bookcases (all sizes)
5. IKEA Malm Beds Frames
6. IKEA Stoleman Storage Systems
7. IKEA Hopen Wardrobe Frames
8. IKEA Gallant Desks
9. IKEA Effective File and Storage cabinets
10. IKEA Jokkmok Dining Set and Table
11. IKEA Bujursta Tables
12. IKEA Hemnes Day Beds
13. IKEA Besta Burs Storage Unit
14. IKEA Tromso Bunk Beds
15. IKEA Besta Boas TV Unit
16. IKEA Bergsbo Cabinet
17. IKEA Leksvik Series Shelving and Storage
18. IKEA Markor Series
19. IKEA Laitorp Storage Series
20. IKEA Norrsten Cabinets
21. IKEA Ramvik Coffee Table with two drawers
22. IKEA Alve Desk
23. IKEA Alve Corner Cabinet

IKEA Pax Kompliment Pine Wardrobe Doors - (Install Review)

2009-12-08T13:32:00.001-08:00

Yesterday I had the opportunity to assemble 4 Pax Wardrobe Frames (2 @ 19" or what I call "narrow" and 2 @ 39" or what I call "wide") with these stained grey Pine Kompliment doors. These doors look great, however (and there is always an however) if you go to drill holes into these doors for handles, be aware that the wood grain on the door runs vertcal on the panel and splits easily. Gradually and slowly drill the holes using a tiny drill bit first and gradually moving up in size to the disired hole size. Let the drill bit do the cutting and do not push the bit into the door. This will minimize any damage that could occur to the door while drilling.

How to build an IKEA Malm 6 Drawer Dresser (step by step photos)

2009-12-08T13:17:00.000-08:00

I had created a step by step photo stream on Flickr.com to illustrate what tools are needed and how to properly assemble an IKEA Malm 6 Drawer Dresser. This is one of several common products that people need help building. If you have smaller dressers (6 drawer or under) the assembly is essentially the same. Once you build this dresser you can build them all! Click the link below to take a look.

Malm 6 Drawer step by step on Flickr

Examples of Pax Wardrobe Assemblies with Pricing

2009-12-06T21:09:00.000-08:00

Listed are examples of IKEA Pax Wardrobe systems that have been previously constructed for our clients. They are broken down with the items used and the price to assemble. Use this as a guilde to compare with your project and to have an approximate estimate of your assembly cost.

IKEA Pax Wardrobe in Greenwich Village

This Project consisted of one 59" wide Pax frame with pre assembled sliding glass doors, 2 Kompliment Drawers, four shelves and two rods. Assembly price $180.00

IKEA Hopen Wardrobe on the Upper East Side

This project consist of Two IKEA Hopen Frames (one Double and one Single door) units. Installed inside were three rods and four shelves. Total Assembly Price $120.00.

IKEA Pax Wardrobe in Hillside, NJ

Project consist of two 39" frames, 4 Kompliment doors, 8 shelves, 2 rods. Total assembly price $180.00.

IKEA Hopen Wardrobes, Rockaway, NY

Project consist of four wide IKEA Hopen Pax frames, 8 doors, 6 Rods, 4 shelves and one drawer unit. Total Assembly Price $350.00

IKEA Pax Wardrobes with sliding doors in Blauvelt, NY

Project consist of four 39" inch Pax frames with two sets of sliding glass doors (assembly required @ $180.00 per set), and 10 shelves. Total assembly price $530.00.

IKEA Pax Wardrobes in Park Slope, Brooklyn

Project consist 5 pax frames, 14 shelves, 7 Kompliment drawer, 3 rods, 7 doors, and 6 handles.

Total assembly $480.00

IKEA Pax Wardrobe System in Tribecca, NY

Project consist of 6 Pax frames (4 narrow, 2 wide), 10 shoe racks, 8 Kompliment wooden drawers 8 wire baskets, 4 rods, 1 set frosted glass sliding doors and 4 frosted glass hinged doors. Total assembly cost $650.00

Welcome To the Furniture Assembly Service Blog!

2009-12-05T18:48:00.000-08:00

Welcome!

If you found this blog though my links on Google Local or through my Classified Adds on the web, this is where I showcase and discuss installs and assemblies of IKEA, CB2, West Elm, Pottery Barn or Crate & Barrel Furniture and Elfa Shelving that I have personally completed for my clients in the New York Metro (New York, New Jersey and Connecticut Tristate Areas).

I will discuss the products (quailty, ease / difficulty in assembly, features) and how they were used or applied. Again, there will be photos to give you inspiration or show what I can do for you. This is an extension of my various advertising campaigns and I treat it as such. However, that said, you can gain from my knowledge and if you feel up to the challange to assemble and install these products on your own, more power to you. If after viewing some of these items and do not feel you have the time, tools, patience or skill to acheive the end result but still want it, give me a call and I will be more than happy to assit you.

Thanks for your time and I hope you find this site valuable!

Regards!

Adam Tate
Owner
Furniture Assembly Service & More, LLC
Call:
917-650-3071
201-282-4259

Email to:
fast.assembly@gmail.com

Vist my other sites:
http://www.furnitureassemblyservice.com/
http://www.whitegloveassembly.com/