GARDA STORE

Niagara Cutter MEB230 Miniature Carbide End Mill, Uncoated (Bright), 2 Flutes, Ball End

2011-02-24T20:08:00.000-08:00

Niagara Cutter is using an "extra fine" grain cemented carbide raw material that is a true sub-micron grain tungsten carbide alloy. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properties and high purity ensure Niagara Cutter's consistent high quality. Specifically designed for machining Aluminum, Stainless Steel, Titanium and Exotic Alloy Materials.

Dormer A191 High Speed Steel Jobber Drill Bit Set, Black Oxide Finish, Round Shank, 118 Degree Conventional Point, 13 piece, 1.5 - 6.5 mm sizes (in 0.5 mm Increments) plus 3.3 mm and 4.2 mm

2011-02-24T20:06:00.001-08:00

Key Features

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
Round shanks allow use with a wide variety of toolholding systems
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
General purpose drills in plastic cases. The cases feature a transparent top, and euro-slot hanger.

Union Butterfield 1528(UNC)/1528(UNF)/1528(UNS) High-Speed Steel Hand Tap, Uncoated (Bright) Finish, Round Shank with Square End

2011-02-24T20:05:00.000-08:00

Key Features

High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
Straight flute drill bits are well suited for drilling in hard materials and are also well-suite to drilling in lathe applications
Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction
Machine Screw Sizes; For use in a wide variety of materials and appropriate in either through or blind hole applications

Hex Hole Sleeve 13/16OD 2 3/4" Length .500" Hexagonal

2011-02-24T20:03:00.000-08:00

These versatile sleeves have a round O.D. with a uniform hexagon hole broached from one end to the other. They are manufactured from cold rolled mild steel in five different sizes. The hex hole sizes are a few thousandths larger than commercial CRS, brass or aluminum hex stock tolerances to allow convenient assemblies to be made.

Precision Twist E3304 Solid Carbide End Mills, Uncoated (Bright) Finish, 4 Flute, Square En

2011-02-24T20:02:00.000-08:00

Key Features

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
Round shanks allow use with a wide variety of toolholding systems
Regular length

Spyraflo HF5-1000-B Self-Aligning, SAE-840 Oil Impregnated Bronze Bearing With Aluminum 2-Bolt Hole, 1" Inner-Diameter Housing-Flange

2011-02-23T19:31:00.000-08:00

Key Features

± 5° Self-Alignment accommodating machining and assembly mis-alignment
Lightweight, approximately 50% of that of cast-iron or steel
Low Profile
Maintenance Free, in medium load, rotational or oscillatory applications
Corrosion resistant

Package Details

Shipping Weight: 0.6 pounds

Product Description

The HF5-1000-B combines the Spyraflo Self-Aligning, SAE-840 Bronze bearing with their sintered aluminum 2-Bolt Hole Housing-Flange. The final assembly offers design engineers a Low-Profile, Flange-Mounted bearing that is lightweight, has clean lines, dimensional consistency and is corrosion resistant. Oil impregnated bronze bearings are an economic solution for medium load / medium speed applications. Manufactured to SAE-840 specifications; containing 25% oil within the porous bronze spherical insert ensuring long, maintenance free, bearing life. Oil is distributed to the mounting surface by a hydrodynamic action, ensuring a protective film of lubricating oil is maintained between the bearing and mounting shaft. The Self-Aligning bronze bearing is very securely mounted into the Aluminum Housing-Flange. Spyraflo Housing-Flange are often able to replace more expensive, larger and heavier cast-iron ball bearing assemblies. The profile and performance of Spyraflo Housing-Flanges make them a very cost effective alternative to traditional Flange-Mounted bearing mounting challenges. Military Vehicles, Playground Equipment, Conveyors, Packaging Machines, Lawn Care Equipment, Loading Platforms and Radar Equipment are among the wide cross-section of applications benefiting from productivity and performance gains from Spyraflo Housing-Flanges. In addition the Spyraflo Housing Flange range can be used as a drop-in replacement for the Bunting Lube-Align product.

Non-Metallic Ball Bearing Acetal / Nylon / Glass 00625-DGN 5mm Bore x 16mm OD x 5mm Width

2011-02-23T19:29:00.000-08:00

Key Features

Acetal/Nylon Composition
Corrosion Resistant
Chemical Resistant
Non Magnetic
Self Lubricating

Package Details

Shipping Weight: 0.05 pounds

Product Description

There are many applications for nonmetallic Ball Bearings when metal bearings are not suitable due to corrosive conditions. Self-lubricating and highly resistant to corrosion, moisture, acids and solvents, these plastic bearings have an Acetal housing with Nylon cages to hold the Glass balls in place. Factors such as temperature and concentration of solution may affect performance of Acetal bearings.

Non-Metallic Ball Bearing Acetal / Nylon / Glass 00608-DGN 8mm Bore x 22mm OD x 7mm Width

2011-02-23T19:28:00.000-08:00

Key Features

Acetal/Nylon Composition
Corrosion Resistant
Chemical Resistant
Non Magnetic
Self Lubricating

Package Details

Shipping Weight: 0.05 pounds

Product Description

Kilian SR-255 1/4" Bore, 3/4" Outside Diameter, 1/4" Wide Single Row Bearing

2011-02-23T19:26:00.000-08:00

Key Features

Full compliment OD precision steel balls in deep ball grooves
Heat-treated races machined from steel bar stock to a controlled finish
Designed for light loads and speeds up to 1,200 RPM
Radial load rating at 600 RPM is 65 lbs / thrust capacity in either direction is 50% of radial rating
Mount directly into hinges, drawer slides, cabinets, furniture, material handling, appliances and racks

Package Details

Shipping Weight: 0.05 pounds

Product Description

Single-row, full-ball compliment, radial bearings - These popular ball bearings are precision-machined from solid bar stock, and designed with a full-compliment of precision steel balls for maximum load carrying capacity. The balls ride in a heat-treated raceway for maximum bearing durability. The deep groove design allows the bearing to carry both radial and axial loads.

Spyraflo PB0-SR188ZZ 1/4" Inner Diameter, Mounted Miniature Precision Ball Bearing In An Aluminum Housing

2011-02-23T19:24:00.001-08:00

Key Features

Quick and easy to install
Savings on design, machining and assembly
Ideal for Medical, Scientific and Pharmaceutical applications
Precision ball bearing capability for hobbyists
Stainless steel, double shield ball bearing, aluminum housing, high level of corrosion resistance

Package Details

Shipping Weight: 0.5 pounds

Product Description

The Spyraflo PB0-SR188ZZ is an efficient and cost effective solution to the challenge of mounting miniature ball bearings in a wide variety of applications. The unique Spyraflo assembly fills the previous void in the market place where, up until now, mounted ball bearings have only been available in shaft diameters greater than 1/2 inch. The assembly consists of a precision Japanese stainless steel ABEC 3 ball bearing mounted in a precision-machined, sintered aluminum pillow-block housing. The aluminum body and stainless steel bearing combination, together with the double shields, give the bearing a high level of corrosion resistance. In the past, when considering the use of miniature bearings for an assembly, one of the critical design elements was how, precisely, the bearings could be mounted. Typically, the mount had to be precision machined, particularly when using high-performance miniature bearings. previously this would have entailed an engineer designing, and then having the critical machining and bearing assembly carried out. The Spyraflo bearing eliminates this task-effectively and economically-just screw in place. The PB0-SR188ZZ is the ideal bearing choice for medical, pharmaceutical, scientific and other precision-oriented fields. They are also in wide use in the expert model making and hobbyist world.

Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , Vee Depth .0200" / .0300"

2011-02-23T19:23:00.000-08:00

Key Features

Radius .0080 / .0120
Melting Point 3722 Degrees Fahrenheit
Specific Gravity 3.98
Scratch Hardness 9 Mohs
Compressive Strength 300000 psi at 25 deg Celcius

Package Details

Shipping Weight: 0.05 pounds

Product Description

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

PFERD 04033 5-1/2" Round Fine Cut Diamond Needle File

2011-02-22T20:55:00.000-08:00

Key Features

5-1/2 inch length
D 91 Diamond Grit
Circular shape for filing and refining of round through-holes and internal geometries

Package Details

Shipping Weight: 0.1 pounds

Product Description

PFERD manufactures diamond files for highest removal performance on ultra-hard materials, including hardened tool steel, tungsten carbide, exotic metals, ceramics and glass. PFERD Diamond Needle files are manufactured by electroplating diamond grit in position on precision forged and ground steel blanks. The evenly distributed, long-lasting and sharp layer guarantees a high filing performance. Diamond needle files are suitable for filing hardened steel and tungsten carbide material in the manufacture of cutting dies, punching and press tools as well as glass, ceramic and fabric reinforced plastics.

There are no customer reviews yet.

PFERD 04007 5-1/2" Round Coarse Cut Diamond Needle File

2011-02-22T20:53:00.000-08:00

Key Features

5-1/2 inch length
D 181 Diamond Grit
Circular shape for filing and refining of round through-holes and internal geometries

Package Details

Shipping Weight: 0.5 pounds

Product Description

There are no customer reviews yet.

Brush Research FLEX-HONE Cylinder Hone, GBD Series, 5-1/2 Inch (140mm) Diameter, Silicon Carbide Abrasive, 240 Grit

2011-02-22T20:51:00.000-08:00

Key Features

Self-centering, self-aligning, self-compensating for wear
Use by hand or in CNC equipment
Order by actual bore size, tool produced oversized
Sizes from 4mm to 36 inches

Package Details

Shipping Weight: 1.95 pounds

Product Description

The Flex-Hone® tool was originally created by Brush Research Manufacturing to deglaze cylinder walls in automotive applications. Brush Research embraced the benefits of a plateau finish and pioneered the concept of plateau honing culminating in the introduction of the Flex-Hone tool in 1972. The Flex-Hone has gained many nicknames over the years and including ball hone, ball style hone, flexihone, dingleberry hone, bead brush, glaze breaker and glaze buster. Flexible honing with the Flex-Hone tool produces an oil holding cross hatch pattern and a true plateau finish free of cut, torn and folded metal. Any type or size of cylinder can benefit from the Flex-Hone®. These abrasive bead style brushes are produced in standard diameters from 4mm to 36 inches. Nine abrasive types are offered including silicon carbide, aluminum oxide, boron carbide and diamond allowing the tool to be tailored to finish any base material. A choice of 11 different grit selections are available for precise control of finish parameters. The elimination of peaks results in rapid ring seating, better oil control, reduced seepage in hydraulic and pneumatic applications and provides better seal performance and longer seal life. Successful applications include firearm chambers, shotgun barrels, musical instruments, combustion chambers, air compressors, pumps, valve bodies, valve guides, brake cylinders, wheel cylinders and the list goes on and on. Flex-Hone® tools are also very effective for deburring cross drilled holes, port radiusing and edge blending. Because of its unique construction, the Flex-Hone is self-centering, self-aligning, and self-compensating for wear so it does not require an elaborate set-up or special training. Deburring can be effectively automated and combined in the machining process to allow a complete cylinder finish in one operation or it can be employed as a secondary operation with equal results.

There are no customer reviews yet.

Norton Sandwet Abrasive Sheet, Paper Backing, Silicon Carbide, Waterproof

2011-02-22T20:49:00.000-08:00

Key Features

Sandwet paper sheet job packs waperproof paper sheets for topcoat sanding; convenient
Sharp silicon carbide abrasive is ideal for wet, oil or dry sanding of primer, sealer, varnish, lacquer, enamel and other topcoats
Waterproof A-weight paper backing
Good performance level
For sanding between coats to remove bubbles or dust that has dried on the surface
Designed for wet or dry sanding to generate super smooth finishes
Can be used wet or dry, with water, oil or other lubricants

Package Details

Shipping Weight: 1 pounds

Product Description

From the Manufacturer

SandWet 9 x 11 Job Pack sheets are designed for wet, oil or dry sanding of primer, sealer, varnish, lacquer, enamel and other top coats as well as bare surface that require super fine finishes prior to coating

Sell: Chocolate Casey Large Tote

2011-02-21T00:28:00.000-08:00

Classic style gets a much-needed shot of edge in Chocolate's Casey tote. A leather-like body and a clean-lined design give it a timeless quality while diamond-pattern seaming and studding add a modern-cool twist.

materials:	Synthetic Logoed lining
measurements:	14" high 15.5" wide 5" deep 18.0" shoulder drop
item details:	Zipper closure Handles have a drop of approximately 5" Strap is adjustable from a drop of 15" to 25"
country of origin:	China
item number:	B003HS5UGG

Each Chocolate bag is carefully planned to fit your every day needs and maintain a chic, eye catching and stable design. Their innovative use of beautiful materials and bold colors is sure to get the attention of those around you. Chocolate is quickly becoming a force in the competitive fashion industry and will continue to create and convey next-level style.

Sell: Ray-Ban RB3293P Bubble Wrap Aviator Polarized Sunglasses

2011-02-21T00:26:00.000-08:00

Fully inspired by the classic aviator, this particular style from Ray-Ban is slightly flared and wraps around the face for fuller protection from harmful rays. It's lightweight, it's versatile, and it's just what you've been waiting for.

materials:	Metal frame Polycarbonate lens
measurements:	Bridge: 15mm Arm: 120mm
item details:	100% UV protection Polarized Case included
country of origin:	Italy
item number:	B003KK5L4M

Ray-Ban is the world's most iconic eyewear brand and is a global leader in its sector. Every model in the Ray-Ban collection is the product of meticulous, original styling that translates the best of the latest fashion trends into an ever-contemporary look for millions of Ray-Ban wearers around the world. From the early Aviator style that emerged in 1937 to the introduction of the classic Wayfarer in 1952, Ray-Ban is a brand that embodies America and adventure, great cities and wide-open spaces, heroism, individuality, and authenticity. Starting with a silver screen debut in 1961, Ray-Ban sunglasses have appeared throughout hundreds of films and have been a favorite on the Hollywood scene for years, both on and off the screen. With timeless and imaginative styles, Ray-Ban consistently blends high-tech design, lenses, and materials. The collection remains true to its classic heritage while continuously evolving to meet today's fashion demands.

Sell: Invicta Women's 0459 Angel Collection Rhodium-Plated Gold-Tone Watch

2011-02-21T00:24:00.000-08:00

Classic, sophisticated design and unparalleled precision define the Invicta Women's Angel Collection Rhodium-Plated Gold-Tone Watch. A round, gold dial showcases gold-tone hands, baton hour indices, and Roman numerals at the six and twelve o'clock positions with black minute markers. A durable flame-fusion crystal protecting the dial is securely held by a stationary 18k gold-plated stainless steel bezel with an indentation marking each hour. A matching gold-plated stainless steel case and bracelet with a fold-over clasp complete the watch's sleek, uniform style. This timepiece uses reliable Swiss quartz movement and is water resistant up to 165 feet (50 meters).

item details:	Precise Swiss-quartz movement Durable flame-fusion protects watch from scratches Gold-tone dial with gold-tone hands, hour markers and roman numerals 18k gold-plated stainless steel case and bracelet Water-resistant to 165 feet (50 M)
item number:	B0043WSSAA

Sell: Elliott Lucca Granada Satchel

2011-02-21T00:22:00.000-08:00

Believe in the weave. This trend-right Elliott Lucca satchel is featured in prettily pebbled leather with a structured shape, a tortoise-like accent, and woven detailing for a look that's right on the money. Its pure cotton lining is an unexpected touch of luxury.

materials:	Leather Cotton lining
measurements:	11" high 14" wide 6" deep 18.0" shoulder drop
item details:	Zipper closure Handles have a drop of approximately 4.5"
country of origin:	China
item number:	B003F24BWI

The little black dress, the perfect pump, and a great pair of jeans are timeless fashion icons. Simplicity and versatility are the common thread. With its high-quality leathers and lavish detailing, the refined Lucca Leather collection belongs in this est

Sell: Steven by Steve Madden BPal Convertible Cross-Body

2011-02-21T00:20:00.000-08:00

This Steven by Steve Madden BPal cross-body just makes it look so easy. Its nylon body shows laid-back, sporty style while its detachable long strap allows convenient carrying. The stud-accented straps are actually pulls to the handy zippered pockets.

materials:	Nylon and synthetic Nylon lining
measurements:	9" high 14" wide 3.5" deep 18.5" shoulder drop
item details:	Zipper closure
country of origin:	China
item number:	B003F76PQS

Steve Madden, the footwear fashion mogul of the 21st century, has immersed his company into virtually every aspect of the fashion industry. With his primary success and initial endeavor as a shoe designer, he has now expanded into other accessories such as handbags, belts, socks, dresses, watches and outerwear. Steve Madden first made his mark over a decade ago with the now infamous chunky, clunky shoe designed for young women. The first Steve Madden shoes spoke to a young woman's independence and today it speaks to that same "grown up" woman. As the Madden girl has matured and evolved, so has the brand. Today the Steve Madden brand, which also includes the sophisticated Steven by Steve Madden line, represents a lifestyle. It is about embracing fashion, style and color while still maintaining that funky independence that first defined the brand 15 years ago.

Sell: Mar Y Sol Bora Bora Tote

2011-02-21T00:18:00.000-08:00

Need a beachy style boost? Compliments will come from all shores when you carry this cute Bora Bora tote, hand-made from raffia-wrapped seagrass, by Mad Imports.

materials:	Raffia
measurements:	11.75" high 16.5" wide 5.5" deep 7.5" shoulder drop
item details:	No closure
country of origin:	Madagascar
item number:	B002A9ISO4

Mad Imports is a socially and environmentally responsible company that markets colorful, handmade handbags from Madagascar and Kenya. Their designs blend the traditional with the contemporary, and utilize renewable raw materials to create vibrant clutches, totes and shoulder bags. Each piece is handmade and brings both economic independence and steady employment to artisans and their families. Mad Imports is a fair trade company.

Sell: Dansko Little Kid/Big Kid Jada Mary Jane

2011-02-19T10:28:00.000-08:00

She'll love sporting this cool and comfy style from Dansko. The Jada features a shiny patent upper, a unique asymmetrical strap, and a molded footbed with arch support that'll keep her cushioned all day long.

materials:	Patent leather upper Manmade sole
country of origin:	China
item number:	B0039NNQ9C

Ahhhhh, Dansko. There you go again. Doing your all-day comfort thing. Making us feel so good on our feet. With excellent arch support and legendary comfort, you let us stand longer than ever. And with great styles in a range of heel heights, you have us feeling all tingly inside, just like the day we first met. When wife and husband team, Mandy Cabot and Peter Kjellerup discovered the world's most comfortable shoe in a tiny shop in Denmark in 1990, they just had to bring some home for their friends. When their friends tried them on, they told their friends. And just like that, a shoe company was born. Now Dansko not only sells their original clogs, but also heels, boots, sandals, wedges and flats too! Every style features the Dansko DNA - materials and construction carefully selected to promote good foot, leg and back health, so that you can stand better, for longer. Say goodbye to choosing between looking good and feeling good. And say hello to having it all.

Sell: adidas Little Kid/Big Kid Galaxy Boost 2 K Running Shoe

2011-02-19T10:26:00.001-08:00

All systems are GO with the adidas Galaxy Boost. Designed for soft, cushioned landings and maximum breathability, this kid-sized running shoe brings elite engineering and comfort to the future record-breakers of the world.

materials:	Mesh and synthetic upper Rubber sole
country of origin:	China
item number:	B00328H5JQ

adidas is a name that stands for excellence in all sectors of sport around the globe. The vision of company founder Adolf Dassler has become a reality, and his corporate philosophy has been the guiding principle for successor generations. The idea was as simple as it was brilliant: to provide every athlete with the best possible equipment. It all began in 1920, when Adi Dassler made his first shoes using the few materials available after the First World War. Today, the adidas product range extends from shoes, apparel, and accessories for basketball, soccer, fitness and training to adventure, trail and golf.

Sell: Lelli Kelly Toddler/Little Kid 9533 Mary Jane

2011-02-19T10:25:00.000-08:00

It's not rocket science--little girls love glitter. That's why she'll adore the sparkly appeal of this adorable mary jane. Fitted with a flexible upper and breathable insole, it's designed to keep her foot fresh and happy from preschool to play date. And she'll get a kick out of the fancy beadwork adorning its pretty metallic base.

materials:	Synthetic upper Rubber sole
country of origin:	China
item number:	B003LPV74O

Developed and designed in Italy over 12 years ago by a husband and wife team, the Lelli Kelly lifestyle brand has become a 42 million dollar little girls brand. Exclusive pattened designs focused on allowing little girls to look and feel like little girls the brand has become the upper end alternative to Barbi in all parts of Europe. The footwear, clothing, apparel accessories and other products combine to touch every part of a little girl's world.

Sell: crocs Toddler/Little Kid Crocband Hi Lined Boot

2011-02-19T10:23:00.000-08:00

The Crocband Hi boot from crocs is the perfect choice for little feet. Featuring the same softly-molded construction as the original crocs clogs, this little boot ensures a perfectly snug fit, especially with elastic panels and a handy back pull tab.

materials:	Synthetic upper Manmade sole
item details:	Available in whole sizes and medium width only
country of origin:	China
item number:	B003C80TI0

Crocs, Inc. is a rapidly growing designer, manufacturer and retailer of footwear for men, women and children under the Crocs brand. All Crocs brand shoes feature Crocs' proprietary closed-cell resin, Croslite, which represents a substantial innovation in footwear. The Croslite material enables Crocs to produce soft, comfortable, lightweight, superior-gripping, non-marking and odor-resistant shoes. These unique elements make Crocs ideal for casual wear, as well as for professional and recreational uses such as boating, hiking, hospitality and gardening. The versatile use of the material has enabled Crocs to successfully market its products to a broad range of consumers.