This is how she was

After reading a bunch online, it seems the stock intake with panel K&N’s flows enough for these cars that run mid 11’s in the 1/4. I’m comparably modded so I thought "let’s go back to the plastic intake".

Charge boxes mounted, waiting for the panel filters to dry.

Everything tidied up. The stock setup has the tubes mount through the front radiator support to grab fresh air from the sides. Everything fit back like a glove.

And since I was in the modding mode, I finally installed my pillar setup with 2 Aeroforce Interceptors. One to read the Engine Control Module, and the 2nd gauge reads the Transmission Control Module.

Car seems to run just as good, although the Supercharger whine is definitely not as apparent. I’m ok with that though. Going to keep an eye on Intake Air temps and see how they look today in the heat. With the amount of pulley I’m running and it being 100° out in the day, I need to slow the heat soak as much as I can.

Cliffs:
1. Cop claims he got fired because he tried to do the right thing
2. Spends a few years getting depressed fighting it in court
3. Gives up and snaps and goes cop hunting
4. L.A.P.D. is now mag dumping into random cars in the area they think matches description, so far I know of a black ridgeline, grey/light blue pickup with two asian women, and another truck they rammed and shot at
5. If you live in the L.A. area and drive a truck, please do NOT leave your house
6. ………
7. What the fuck is in the water in L.A.??????

Post what you decorated yourself with on halloween!

I didn’t have alot of time so I just went at myself with the eye liner pen and put on some colorful clothes.

Vato-Stance nation…

I accidentally the whole thing…

it’s a little dirty

after a pressure wash

removed some stuff

yup

thar

disc has cracks and wear on the sprung hub section

moar stuff removed

continued

Any other advice welcome..

Since the dear dear loss of the babe forum, this webforum has been lacking women. The women we do have aren’t going to do much for us.

For example, if one of our members, Sarah, decided to expose her breasts and body to us via webcam, we would be mortified beyond belief at the stretch marks and loose skin.
(No offense really, Sarah. I just needed an example. I’m sure you’re hot, but ladies that shot a bowling ball out of their bajingo kinda grosses me out at my tender age of 14)

Post some womens that you drool over

I’ll start

So, i had some spare lumber lying around, and decided I would just build it

Took some 2×4s, put a nice curve on the end with the bandsaw which will act as the legs. I need it to be really sturdy since it is so narrow, which means long forward legs

Roughed out the crossbars to width

Grabbed and cut a nice 13 inch piece of fir for the tabletop, but it turned out to be really warped, so i had to discard it and think up another idea….

Had a couple of 2×6s lying around, did a glueup with two of them, giving me my 13 inches. Clamped it up real tight, and when it was done you cant even tell it was two pieces

Cut four table legs and the crossbar for the center of the tabletop

Completely roughed out at this point, but its ugly, its 2×4s, i expected that. Time to sand everything down and give the edges some nice routing

Sanded everything down, got a nice clear look to it like knotty pine, starting to look less like 2×4s

Time for a cocaine break…. errrr i mean sawdust…. i mean…. WHAT

OW, OW OW FUCKOW

Router bit me.

Not gonna let that stop me though, taped it up good, will have a funny shaped finger for a while, keep working

Guess its not really mine until i put some blood into it

Putting a nice columnar look to the table legs with an fancy ogee bit

Tabletop looks spectacular with a table edging bit

Did a full roundover on the legs and the supports, needs some touching up at the joints, but will do that tomorrow, its dark

Oh, and never buy harbor freight sanding belts. I went through 5 in one day, they kept snapping

Was thinking of something with a 4×4 in the corners against the wall and 2×4s connecting them front and back so that I’d have a sort of slot to place the pool brush in when I’m not using it, as well as garden stakes

On at least one of the 4×4s it’s going to go up to 8ft or so so that I can hang the philodendron

Anyone have any inspiration for me?OMG

Everything I have on Instagram was taken and edited with iPhone apps (3GS and 4S, though there’s a few photos of LCD screens and screenshots of apps I’m making). I’ll be posting favorite photos I’ve taken here (chronologically), but you can see my profile and view all my Instagram photos at this link: http://statigr.am/jtown_

Let me know what you think!

70 sheets of drywall, down the stairs all by myself, the worse 4 hours ever!!!

Bathroom and stairwell studded out.

Bedroom/closet studded out.

Family room home theater wiring, and "boxes" for the in-wall speakers.

Tub in.

Insulation, such itchy stuff!