Genpower Portable generators

Lavor PWH 2.0 hot water pressure washer - SALE NOW ON

2010-09-09T04:11:00.000-07:00

ONLY £999+vat! - BE QUICK!

Click here; Lavor PWH 2.0 Hot water high-pressure cleaner

• Three ceramic coated pistons, brass axial pump head with built-in by-pass valve

• Suction and delivery S/S valve

• Vertical burner with high thermal efficiency steel coil

• Safety valve

• Temperature regulation gauge

• Glycerine pressure gauge

• LSP: Late Shut down Protection 24V

• Quick connection joint gun/hose

• Adjustable detergent delivery built-in tank for indirect suction

• Two ways fuel pump

• Ergonomic handles and impact resistant covers

• Accessory holder

• Power cable (m 5)

Operating pressure 30-100bar

Delivery rate 330-660 l/h

Max water temperature 140°C

Absorbed. power 2800 W

Voltage 240V-50Hz

Machine dimensions/weight: 94x65x90cm / 97 Kg

Includes:

• Professional gun

• High pressure hose 8m

• High/low pressure lance with adjustable head and nozzle

• Brass connection for inlet water

• High pressure nozzle

• Quick connection for H.P. hose.

Made in Italy - the home of high quality pressure washers

12 months return to base warranty

The Lavor PWH 2.0 Hot water pressure washer is a professional grade hot water pressure washer ideal for washing tractors, HGVs, car or van fleets etc.

For all your tools and powertools visit http://www.toolsandpowertools.co.uk/

Hyundai generators

Genpower Ltd - UK importer for Hyundai and Evopower power equipment

2010-09-03T07:35:00.000-07:00

Hyundai Inverter generators - quick start guide

Hyundai HY1000SI, HY2000SI & HY3000SI
Quick start up guide
1. Fill petrol tank with straight unleaded petrol –(no premix with oil in petrol). Be sure
to use new petrol, as old petrol deteriorates over time.
2. Fill engine with SAE10w30 or 15w40 engine oil up to the top of the oil filler neck,
replace dipstick.
3. Switch both switches on control panel to ON.
4. Switch petrol tap to ON.
5. Push choke lever to start position (IMPORTANT: On HY1000SI this is to the
RIGHT. On HY2000SI & HY3000SI this is to the LEFT). The choke should be used
when the machine is hot or cold.
6. When starting with a new machine, or if it has run out of petrol: HY2000SI &
HY3000SI, push primer bulb fully in 30+ times to prime the carburettor. HY1000SI,
if starting from empty fuel tank, gently pull pullstart handle 10-20 times to prime the
carburettor. On all machines, you will see the petrol being pumped through the
clear in-line filter, continue pumping until the carburettor bowl is full of petrol.
7. If the fuel tank is full of petrol, on HY2000SI & HY3000SI, push primer bulb 5
times.
8. Pull pullstart handle quickly – the generator should start easily if the above
procedure has been followed.
9. After engine has started, push choke lever back to run position.
Warning – take care when fitting side cover as damage to choke lever may occur

For pdf download of Hyundai Leisure generator quick start guide, click here.

Hyundai Leisure generator manual, click here.

Lavor Hot Water Pressure Washer - Hot Tech

2010-09-03T07:26:00.001-07:00

The New lavor Hot Tech is a very compact machine, producing upto 90 degrees of hot water at 2150psi.
The hot water pressure washer weighs in at just 45kg and with it's two wheels and convenient handle, can be easily moved around.
The 2300w motor drives the Italian high pressure pump, giving upto 2150psi. The pressure washer comes with 5m of high pressure hose, 5m 13amp supply lead, variable fan lance, foam applicator, built in diesel tank for the heating unit, hose adaptor and full instructions.

This is a high quality Italian made pressure washer, with a 12 months return to base warranty.

Lavor Hot Tech Hot water pressure washer

Or buy here: Lavor Hot Tech

Free Air Compressor - Enter NOW!

2010-08-20T06:38:00.000-07:00

Win this Sealey Air Compressor

Just join our newsletter mailing list and you will be entered into our monthly prize draw to win some fantastic powertools.

Click here to add your email and enter the free draw:

http://www.toolsandpowertools.co.uk/compressors/direct-drive/oiled/sealey-sa2415-air-compressor-free-prize-draw/

Aluminium cylinder head with cast iron cylinder gives added resistance to wear.

Suitable for general-purpose workshop applications.

Pump head directly coupled to heavy-duty induction motor for reliable and quiet operation.

Welded tank complies with latest safety requirements.

Fitted with fully automatic pressure cut-out switch and twin gauges displaying tank and working pressures.

Fitted with ASTA/BS approved non-rewirable plug.

Model No. SA2415

Additional Information
Weight: 26kg
Model No: SA2415
Motor Output: 1.5hp
Voltage/Phase: 230V - 1ph
Input Current: 5A
Air Displacement: 6cfm
Tank Capacity: 24ltr
Maximum Pressure: 116psi/8bar
Voltage/Phase: 230V - 1ph
Maximum Free Air Delivery: 4.2cfm

http://www.toolsandpowertools.co.uk/ is a division of Genpower Ltd

X-Calibur Plasma Cutter - Special Offer

2010-07-27T13:43:00.000-07:00

The New X-calibur 40Amp Plasma cutter is on special offer at http://www.toolsandpowertools.co.uk/

Check it out here: http://www.toolsandpowertools.co.uk/welding-and-cutting/spot-and-stud-welders/-/xcalibur-zxcut40p-plasma-cutter-110v-to-240v-single-phase/

The XCALIBUR CUT-40P utilises a Euro connector type torch with a 6m cable assembly for increased working range.

The unit has over current / overheat protection circuits and warning indicators for incorrect air pressure and torch problems.

The XCALIBUR CUT-40P is an IGBT inverter with digital control technology. Its design offers a wide range input voltage with automatic selection, so can be used with a 110v or 240v supply.
It comes complete with pilot arc start and grid cutting feature.

Specification:
Part No ZXCUT-40P
Input Voltage 110V AC 50/60Hz OR 230V AC 50/60Hz
Rated Input Power 3.44 kW 4.63 kW
Cutting Current Range 20-30A 20-40A
No Load Voltage 380V DC
Duty Cycle 30A @ 35% 40A @ 40%
Max.Thickness 15mm 20mm (Carbon Steel)
Quality Thickness 12mm 20mm (Carbon Steel)
Protection Class IP 23S
Dimensions mm 430 x 170 x 270
Weight Kg 12.6
FREE UK SHIPPING!

Hyundai Leisure generators Now in stock

2010-07-26T14:50:00.000-07:00

Hyundai Leisure generators back in stock.

We now have the Hyundai HY1000Si, HY2000Si and HY3000Si back in stock.

These leisure generators are proving very popular with motorhome and caravan users, being ideal for keeping the battery charged up and powering TVs and computers etc.

The power output is a pure sine wave form, so it is safe to use with computers and sensitive electronic equipment.

Buy online from http://www.toolsandpowertools.co.uk/ or http://www.genpoweruk.co.uk/

Lavor PWH 2.0 Hot water pressure washer - NEW!

2010-07-26T14:41:00.000-07:00

New from Lavor, the PWH 2.0 Hot water pressure washer / steam cleaner.

• Three ceramic coated pistons, brass axial pump head with built-in by-pass valve
• Suction and delivery S/S valve
• Vertical burner with high thermal efficiency steel coil
• Safety valve
• Temperature regulation gauge
• Glycerine pressure gauge
• LSP: Late Shut down Protection 24V
• Quick connection joint gun/hose
• Adjustable detergent delivery built-in tank for indirect suction
• Two ways fuel pump
• Ergonomic handles and impact resistant covers
• Accessory holder
• Power cable (m 5)

Operating pressure 30-100
Delivery rate 330-660 l/h
Max water temperature 140°C
Absorbed. power 2800 W
RPM 2800
Voltage 240V-50Hz
Machine dimensions/weight: 94x65x90cm / 97 Kg

Includes:
• Professional gun
• High pressure hose 8m
• High/low pressure lance with adjustable head and nozzle
• Brass connection for inlet water
• High pressure nozzle
• Quick connection for H.P. hose.

Fore more info - click here: http://www.toolsandpowertools.co.uk/environmental-and-janitorial/pressure-washers/electric/lavor-pwh-2.0-hot-pressure-washer-steam-cleaner150-bar-140-celcius/

Made in Italy - the home of high quality pressure washers

12 months return to base warranty

www.toolsandpowertools.co.uk - tools buy now

2010-07-18T15:16:00.000-07:00

Try out our easy shopping cart system- n need to register, just click Paypal or GoogleCheckout buttons.
www.toolsandpowertools.co.uk
For all your welding, welders, air compressors, pressure washers, workshoptools etc

www.toolsandpowertools.co.uk

2010-07-18T15:12:00.000-07:00

New Tools and powertools website- http://www.toolsandpowertools.co.uk/ Over 10,000 tools available on line. We stock the following brands - Sealey, Hyundai, Fiac, Evopower, Cebora, Weldstar, Armorgard

www.toolshopwales.co.uk

2010-02-16T14:52:00.000-08:00

Genpower have opened a new tool shop at their premises in Milford Haven. All types of power and hand tools are available to purchase on-line or collect from the store. The new website address is www.toolshopwales.co.uk

The new tool shop stocks a large range of Sealey tools, Hyundai Power Products - diesel and petrol generators and pressure washers, compactor plates, compressors, welders, battery chargers, socket sets, welding consumables, etc.
Call in to have a look round, or telephone 01646 66 38 48.

Kipor generator spare parts

2008-12-11T08:34:00.000-08:00

We have recently taken over the Kipor Generator website from Peak Generators. At present we have a number of KDE19STA3 3 phase silenced diesel generators and various spare parts. We are in the process of re-stocking our spare part department with a large range of Kipor generator spare parts. If you have any requirements for Kipor spare parts, please let us know and we will do our best to try and help. Contact sales@kipor-generators.com website: www.kipor-generators.com

Mains Changeover switch

2008-11-24T15:48:00.000-08:00

Today we have had a lot of enquiries about which mains changeover switch to use.
Domestic dwellings in the UK have a 100 amp supply, so any mains changeover switch installed into the electrical system, must be rated at 100 amps, even if it is connected to a 5kw generator which produces 20 amps.

The changeover switch needs to be installed by a qualified electrician. It is positioned after the electricity meter and before the distibution board.

In the event of a power cut, the generator just needs to be switched on and the mains changeover switch turned and the house can carry on almost as normal. If using one of our very popular Hyundai DHY6000SE silenced diesel generators, please be aware that the maximum output is 5kw.

Typically a 5kw generator would power the lights, central heating pump, TV, PCs, fridge, freezer and maybe one other larger appliance.

The automatic mains failure system is asked for more and more these days. However, in most cases this is not necessary, just adding complexity and cost to the installation.

For more details, visit: www.genpoweruk.co.uk

Standby Generators

2008-11-23T00:00:00.000-08:00

Standby Generators
This time of year many people are interested in a generator for home standby during the winter months. Below are a few suggestionsto help you make your decision on what type to use.

Petrol or Diesel?
Generally I would recommend a diesel generator for home standby, for the simple reason that diesel is a more stable fuel for long term storage. Petrol generators, if left for long periods of time can become difficult to start, as the petrol can turn to gel in the carburettor, this would then require the carburettor to be dismantled and cleaned. Also, if stored in cans in the garage for any length of time, petrol can deteriorate. Another point, diesel stored in cans is less of a fire hazzard than petrol.

Diesel generators are normally noisier than petrol, so it may be worth considering the fully enclosed silenced type of diesel generator.

How do I connect my standby generator to my house?
The best way to do this is to fit a mains /generator changeover switch. This will cost around £100 to £150 and will have to be installed by your local electrician. Once the mains changeover switch is installed, in the event of a power cut, you just connect your diesel generator to the external wall socket, start the generator, flick the changeover switch and you will have your normal electric supply to the house resumed, albeit, powered by your standby generator.

Be careful not to overload the generator. A standard residential mains supply is 100 amps, which equates to 23kw. It is not necessary to have a generator anywhere near this size, typically, an average home can manage quite easily with a 5kw generator, however, if you carried on using electricity as normal, you probably would overload a 5kw generator. There are two options, either be careful not to overload the generator, by only using the essential appliances, i.e. lighting, fridge, freezer, TV, PC, central heating pump etc. or the changeover switch can be wired to feed an essential use distribution board, where, when all the appliances connected to this board are switched on, it does not exceed 5kw. The second option, is the prefered method, but would require a little more work from the electrician.

Routine maintenance
Generally a standby generator does not require much maintenance, as it is rarely used.
It is very important to make sure the battery is in good condition and fully charged at all times. It is a good idea to run the generator for a couple of hours every month to make sure the battery is being kept charged, with the generator running, the battery voltage should be reading around 13-13.8v. Or use a small car battery charger once a month to keep the battery charged.
The engine oil should be changed every 100 hours or annually, whichever comes sooner for a 5 kw diesel generator.
The air filter should be changed every 500 hours
The diesel filter should be changed every 500 hours.
When you are testing the generator, check the voltage and frequency (hertz) readings. The volts should read 230v+- 5v. The frequency, which is a measurement of engine/alternator speed, should be set at 51.5hz, with no load.

The location of the generator is also very important. The exhaust outlet must be in the open air. All generators produce a lot of heat, this heat must be removed from the area immediately around the generator to prevent over heating. The generator must also be protected from the rain.

WARNING - Petrol generators produce carbon monoxide - this is an odourless gas that will kill you in minutes. DO NOT operate a petrol generator in an enclosed, or poorly ventillated area, or near open windows.

Well proven and recommended generators include the Hyundai DHY6000SE and the Evopower HD6000SL, these are both 5kw diesel generators that are popular for home standby use.
Visit: www.genpoweruk.co.uk or www.hyundai-generators.co.uk for more information.

2008-08-21T00:13:00.000-07:00

Inverter Generators - This type of portable generator is very popular with the leisure industry. Producing a very smooth, pure sine wave output, sensitive electronic equipment, like PCs, DVD players etc can be run from this generator, without causing any damage.
Due to their design, they are more compact and lighter, more economical and quieter than conventional generators, this comes at a price, however, being approximately 2-3 times the cost of a similar output conventional petrol generator.

What is an inverter generator? The inverter generator has a petrol engine, driving a small alternator, this feeds the inverter board, which converts the varying alternator current into constant 230v/50hz pure sine wave output.
With a conventional portable generator, the engine runs at 3000rpm at all times, irrespective of the load implied on the generator. An inverter generator will run justat tickover, if a very light load is applied, increasing in revs to match the load, if a heavier load is applied to the generator. This contributes to the improved fuel economy and low noise output of the inverter generator, often called suitcase generator.
Popular makes are the Honda EU10i, Honda EU20i, Robin Subaru R1700i, Hyundai, HY1000Si, Hyundai HY2000Si http://www.genpoweruk.co.uk/product.php?productid=16189 and Hyundai HY3000Si http://www.genpoweruk.co.uk/product.php?productid=16186&cat=262&page=1. Of these makes, the Honda and Subaru are top of the range machines, but at a very high price, however, the Hyundai range is very similar in specification, but at a far lower price.

2008-08-20T08:33:00.000-07:00

Portable Generators

I have started this blog to help people understand the problems associated with portable generators and also to obtain feedback from portable generator users, that may help improve the quality and functionality of these machines.

The market for portable generators has changed dramatically over recent years, due mainly to the movement of production to China and the subsequent reduction in price of these machines. Other factors include an increasing number of people relocating to the countryside and working from home, via the Internet, who require 100% reliability in their electricity supply. Also at the back of everyone's mind is the ever increasing dependency the UK has on potentially unreliable overseas gas supplies to power it's aging power generation network. The threat of widespread blackouts has never been greater.

The most common type of generator for home standby is a 5kw silenced diesel generator. These are economical to run and provide enough power to operate almost as normal in the home or office.
Genpower Ltd - www.genpoweruk.co.uk have a good selection of reasonably priced units to choose from.

What are common problems experienced with portable generators?

Ventilation -Most portable generators are air cooled, running at 3000rpm. It is essential that these machines are well ventilated and that the exhaust fumes are prevented from entering the enclosure if the generator is not used outside.

The oil level needs to be checked every day. As most generators have low oil pressure cut out devices, it is often over looked, with the belief that no harm will come to the generator, if the oil level becomes too low. This is not true, if the oil level is never checked, eventually the level will drop low enough for the engine to loose the splash action fom the crankshaft, whilst still maintaining oil pressure, thus not cutting out. This is when damage is done. The low oil pressure cut out works if the machine is suddenly without oil, i.e. if it was tipped on it's side, it would cut out and save the engine.

Over loading - most generators have breaker or trip switches that cut the load on the alternator if the load is too great. The problems occur if the breaker does not trip out as and when required, or if the load is just below that of the breaker tripping out, but above the maximum continous load of the alternator. The alternator can over heat and the windings can break down, resulting in permanent and expensive damage to the alternator.