GNN Vietnam - Automation

Wachendroff - WDGA 36A CANopen

2020-05-28T16:00:00.002+07:00

Absolute shaft encoder, magnetic, CANopen WDGA 36A
Synchro flange;
Housing: Ø 36 mm

16/43-bit Single-turn/Multi-turn;
Shaft: Ø 6 mm, 8 mm;
Communication Profile according to CiA 301
Device Profile for encoder CiA 406 V3.2 class C2;
binary code

Trafag - N 8202

2020-05-28T15:55:00.001+07:00

Technical Data

Applications	Shipbuilding, Engine manufacturing
Category	Pressure transmitters
Accuracy @ 25°C typ.	± 0.5 % FS typ.

Steril-Air AQT Submersible UV Emitters

2020-05-28T15:51:00.001+07:00

sterilAir AQT immersion systems are ideal components for
reliable disinfection of water tanks in humidifiers and cooling towers.

Rowan Elettronica - 400 SERIES INVERTER

2020-05-28T10:31:00.002+07:00

The 400 SERIES Digit Inverters along with the G series Vector motors represent our best solution for the “motion control” needs.

The speed and torque control are realized by the FOC VECTOR system with encoder feedback.

ROTORK - IQML - Linear Modulating

2020-05-27T16:06:00.001+07:00

Benefiting from all the features of the IQM 3-phase electric actuator, the IQML has a linear output drive providing seating thrust output of up to 43 kN (9,667 lbf).

Pizzato - FR 508-M2

2020-05-27T16:02:00.000+07:00

Position switch with piston plunger

General features

Housing:

Polymer housing, one threaded M20x1,5 conduit entry (FR series)

Contact block:

1NO+1NC fast action (B5)

Head:

With piston plunger

Protection degree:

IP67 according to EN 60529

Positive opening:

Yes

Type	File
General Catalog	ZE_GCP03A18-ENG_55-66.pdf
2D file	ZF_DXF_FR_x08_A10.zip
3D file	ZF_STEP_FR_x08_A10.zip
Item’s PDF sheet	FR 508-M2.pdf

M.G.M motor - BA/BAX Series

2020-05-27T15:52:00.002+07:00

MGM squirrel-cage motors and brakemotors deliver the best performance and reliability combined with low or no maintenance. Designed for continuous duty also under tough service conditions, these brakemotors are used wherever very fast, precise, very high cycling and safe braking are the application needs. BA series represent today’s most advanced brake motors technology.

Power Range: 0.12 HP – 100HP.

Click here for the comparison chart of MGM motors.

Main Features

All motors designed for inverter duty
Single Speed / Two Speed
Totally Enclosed Fan Cooled (TEFC)
Dimensional Standards per IEC Standard (Metric)
Flange Coupling per NEMA Standard (Imperial)
Continuous duty (BAX)
Engineered design
Oversized brake disc for high brake torque or long lasting (reduced maintenance)
Manual Brake Release
Fine brake torque adjustment
AC (3-ph.) brake – High Brake Torque/Very fast reaction Time
DC brake (single ph. with built-in rectifier)
Brake Terminals Connected with Motor Terminals or on a Separated Terminal Block
Electrical Standards per NEMA-MG1
Compact or Oversized Conduit Box
Pressed-steel brake cover
Molded plastic fan
Extremely low rotor inertias
Heavy-cycling application
Hex Hole on NDE for manual shaft rotation with Allen Key
cCSAus approved
CE Mark for shipment into Europe.
CCC approval for shipment into China
Go to Product Catalogues

Insulation System

Phase insulators
Vertical dipping
Slot Liners

Mounting Configuration

Feet Integrated in the frame
Foot Mount(B3)/Face Mount (B14)/Flange Mount (B5)
NEMA C face
Reduced or Increased flange/shaft size available
Suitable for mounting in any position

Optional Features

Severe duty protection (Wash Down – Marine)
50 Hz for worldwide use
Forced cooling for low frequency operation
Thermostat or Thermistors (PTC)
Classes H insulation
Mounted encoder
Drain Holes
Micro-Switch detector (ON/OFF Brake – Brake wear)

Typical Applications

Standard Induction Duty Applications
Rapid Cyclic Start/Stop
Palletizers
Packaging Machinery
Conveyors
Synchronized Systems
Speed Regulated
Winches
Transfer Cars
Stackers
Crane Hoist/End Truck/Trolley
Etc. See Applications Section

Kuebler - Encoders Incremental 2400

2020-05-27T15:48:00.000+07:00

Ideal for small devices
Robust bearing structure
Adaptable

Dimension Ø 24 mm
1.024 ppr incremental
Max 6 mm shaft, round
Max 6 mm shaft, with flat surface
Max 1/4" shaft, with flat surface

Hibar - 1S/2S Rotary Valve

2020-05-27T15:43:00.001+07:00

The Hibar S Series Rotary Valve Pumps are ideally suited for higher viscosity applications (>20,000 cps)

The Hibar S SerieS rotary ValVe PumPS are ideally suited for higher viscosity applications (> 20,000 cps) that require dispensing of 50 µl to 20 ml per shot. Hibar rotary valve style pumps have proven reliability and accuracy in a wide range of industries for over 30 years.

The S Series Pumps combine this proven dispensing technology with state-of-the-art servomotor drives to provide precise, programmable control over the dispense volume and speeds. The modular design and electronic control simplifies interfacing to existing filling systems.

SERVOMOTOR DRIVE FEATURES

Accuracy: Dispensing accuracies of ± 0.2% or better.
Control: Precise control of the dispense profile minimizes splashing and foaming while maximizing the cycle rate.
Versatility: With a simple serial connection, recipes and parameters such as acceleration, fill volume and fill speed can be downloaded to the pump with ease.
Compact: The motor, resolver and drive control are one integral unit mounted on the pump.
Simplicity: Requires only 48 VDC power and a start signal to perform a programmed dispense cycle.

S SERIES PUMP FEATURES

Integrated check valves.
Self contained, easily adaptable to most automated filling equipment.
Integral servomotor drive with built-in motor controller.
High quality Stainless Steel construction.
Low maintenance design, long service life.

model	Plunger Diameter	Stroke	maximum Dispensing Volume (cc)	Cycle Speed (cpm)	Drive Voltage VDC	external Dimensions inch (mm)									Weight lbs (kg)
	inch (mm)	inch (mm)				A	B	C b	D	E	F	G	H	J
1SR-3M	3/16 (4.8)	1/2 (12.7)	0.230	0-150A	48	3.39 (86)	3.45 (88)	11.72 (298)	3.97 (100)	1.63 (41)	1.25 (32)	8-32	1.93 (49)	1.70 (43)	7.0 (3.2)
1SR-4M	1/4 (6.4)		0.400
1SR-5M	5/16 (7.9)		0.630
1SR-7M	7/16 (11.1)		1.230
1SR-10M	5/8 (15.9)		2.510
2SR-8R	1/2 (12.7)	1 (25.4)	3.220	0-120 A	48	3.66 (93)	3.71 (94)	13.72 (348)	5.1 (130)	2 (51)	1.5 (38)	8-32	2.06 (52)	1.96 (50)	9.0 (4.1)
2SR-10R	5/8 (15.9)		5.030
2SR-12	3/4 (19.1)		7.240
2SR-14	7/8 (22.2)		9.850
2SR-17	1-1/6 (27.0)		14.520
2SR-20	1-1/4 (31.8)		20.110

A Maximum cycle rate is application dependant B Dependent on choice of servo motor model

AppliCations
general		Cosmetics		Food		Pharmaceutical
Toothpaste Caulking Glues/Adhesives Grease/Oils Zinc Gel	Abrasive Kitchen/ Bathroom Cleaner Paints/Inks Tooth Whitener Fluxes	Mascara Exfoliant Lipstick Creams Lotions	Shampoos Antiperspirant Lip Gloss Nail Lacquer Foundation	Salad Dressing Popcorn Oil Ketchup/Mustard Marmalade Sauces	Juices Honey Butter Margarine Relish	Medicine Cough Syrup Antibiotic Blood Serum Biological

GRAEFF - product overview

2020-05-27T11:59:00.006+07:00

			We develop, design and produce thermocouples and resistance thermometers for almost any industrial application.In addition, our sensors have the appropriate approvals for use in the ATEX / IECEx area.
			Our melt pressure transducers are used in almost all branches of industry in which melt pressure transducers are required With it´s high quality and environmentally friendly properties, you get a product, which can be optimally integrated into your application
			Consultancy, design and supply of customer specific heaters and heating cartridges.
			The ISOMA insulation sleeve, reduces heat loss by heat conduction.By minimizing the thermal efficiency, it minimizes the power requirement or achieves a lower heating time with the same heat output.As a contribution to reducing energy costs, a consumption reduction of between 20 and 40% can be achieved depending on the design and application.
			Temperature controllers supplement the range of temperature sensors: Single and multi-channel control systems with up to 256 control zones are included in our program.
			Consulting, design, development and delivery of systems for continuous and systematic process monitoring of various process variables such as temperature, pressure and unit signals.Complementary components for load monitoring, temperature limiters, thermostats, safety limiters for thermoplastic processes in the extrusion and injection molding sector.

Compact cylinders to ISO 21287

2020-05-27T10:08:00.000+07:00

Diameter 12, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125 mm
Stroke length 1 ... 500 mm
Force 51 ... 7363 N
Double-acting, single-acting, pushing/pulling.

Eltra EL - ER 30

2020-05-27T09:54:00.001+07:00

EL - ER 30 E / H

The EL 30 - ER 30 series consists of miniaturized encoders (ø 30 mm) ideal when a minimal size and excellent performances are required. Several flanges and output types available up to 28 Vdc input voltage.

Dinal GSBG . GSXG

2020-05-27T09:45:00.003+07:00

Coupling obtained from two anodized aluminium hubs with special steel bellows. Unique misalignment correction capacity; high torque rigidity. Backlash and vibration free. Outstanding servo control. Screw fi xing system. Clamp fi xing system. Working temperature range: -30 °C ÷ +120 °C.

Grandezza Size

0 D mm.

Lunghezza Lenght L - mm

Posizione grano Screw position M - mm

Filetto grano Screw thread

d1/d2

GSBG1222

2.2

M 2.5

03/03

04/04

04/06

05/05

06/06

GSXG1520

2.0

03/03

04/04

04/05

05/05

06/06

GSXG1522

2.0

03/03

04/04

04/05

05/05

06/06

GSXG1525

2.0

03/03

04/04

04/05

05/05

06/06

GSXG2029

3.2

04/04

04/06

06/06

06/10

08/08

10/10

10/12

12/12

GSXG2035

3.2

04/04

04/06

06/06

06/10

08/08

10/10

10/12

GSXG1924

04/04

05/05

06/06

08/08

10/10

GSXG2526

2.8

06/06

08/08

10/10

12/12

14/14

16/16

Human-machine interface controller HM-730S (4.3")

2020-05-27T09:33:00.003+07:00

• Human machine interface 4.3" TFT screen 65536 colors display model
• Support multiple communication ports (RS232 / RS422 / RS485)
• Resolution 480 x 272 pixels
• Multilingual editing function
• Supports vertical and horizontal display
• Support HMI-to-HMI data replication
• Support multiple download modes: RS232、USB
• Editing software PanelDesigner supports Windows XP / Vista / 7 / 8 / 10 operating system

R5 Oil-Lubricated Rotary Vane Vacuum Pumps

2020-05-27T09:17:00.001+07:00

Ultimate pressure: 0.05 - 20 hPa (mbar)
Nominal pumping speed 50 Hz: 3 - 1600 m³/h
Nominal pumping speed 60 Hz: 4.8 - 1800 m³/h

CLEARPOINT® high pressure filter, 100 to 500 bar | Bekomat

2020-05-25T16:51:00.002+07:00

The higher the pressure is, the higher the requirements are for compressed air filtration. With a very robust housing and high temperature resistance of up to 120°C, CLEARPOINT high pressure filters provide a variety of technical and economical advantages for reliable separation of solid contaminants, aerosols, oil vapours and odours.

BG Series Helical Geared Motor | Bauer Gear Motor

2020-05-25T16:40:00.001+07:00

Our most selling and most economical unit, the BG gear motor, sets new standards for reliability and economy and includes unparalleled standard features. An inverter friendly design provides for easy integration now and a truly future proof solution. Inch or metric dimensioned output shafts are standard providing for easy integration into all your applications.

Air operated Pinch Valves with Flange Connection - VMC Series

2020-05-25T16:18:00.005+07:00

The air operated pinch valves of the VMC series are available in the nominal diameters of DN25 to DN150. They are designed with a flange connection complying with DIN EN 1092 (PN10/16) / ANSI B 16.5-150lbs (DN40-150) as standard. VMC series air operated pinch valves can also be provided in compliance with DIN 11853-2 and DIN 11864-2 Form A.