Designing a Bluetooth printed circuit board is a complex task, especially if the production aims to reduce said problems during production. Bluetooth technology has been around for some time, so it’s unforgivable for manufacturers to mess up its design.

Electronics manufacturing companies live and breathe the general rules of thumb when it comes to Bluetooth circuit board design. These will be outlined in this resource article.

Antenna Placement and Design

One of the most critical aspects of Bluetooth in a PCB assembly is the placement of the antenna. The antenna receives and transmits Bluetooth signals, so quality inspectors are meticulous about its design and placement on the board. Slight differences from the approved prototype may impact the overall functionality of the device.

Positioning: The antenna should be placed as far away as possible from noisy components like processors, power supplies, and clock signals. It’s generally recommended to position the antenna near the edge of the PCB, away from other components, to minimize interference and ensure a clear signal path.

Ground Plane Considerations: Avoid placing a ground plane directly beneath the antenna. Doing so can negatively impact the antenna’s radiation pattern and efficiency. Instead, create a keep-out zone around the antenna. It should be free from ground planes, traces, and other metal objects.

Antenna Types: You may choose between many types: chip antennas, PCB trace antennas, or external antennas. PCB trace antennas are popular due to their low cost. They are also very easy to integrate. However, they require precise design and tuning to match the desired frequency.

Power Management

Another crucial criterion for Bluetooth PCB is effective power management. This is highly important for battery-powered devices. Poor power management can lead to a handful of issues like Bluetooth signal interference.

Low-Power Design: Implement low-power design techniques to extend battery life:

• Use low-power components
• Optimize firmware to minimize active and idle power consumption
• Ensure that the Bluetooth module enters a low-power mode when not in use

Power Supply Decoupling: Proper power supply decoupling will stabilize operation on top of reducing the noise. Place decoupling capacitors close to the power pins. A combination of capacitors with different values (e.g., 10uF, 0.1uF, and 1nF) will filter out noise across a wide frequency range.

Voltage Regulation: Use a low-dropout regulator to provide a stable voltage supply. The regulator must have ow noise and good transient response characteristics. This is because voltage fluctuations can affect the Bluetooth signal quality.

Signal Integrity and RF Layout

Maintaining signal integrity is essential for reliable Bluetooth communication. High-frequency signals may be susceptible to signal degradation. This leads to communication errors and reduced range.

Impedance Matching: The transmission lines connecting the Bluetooth module to the antenna should be impedance-matched. This should avoid signal reflections and losses. For most Bluetooth applications, a characteristic impedance of 50 ohms is standard. Make sure to use controlled impedance traces. Moreover, calculate trace width and spacing based on the PCB stack-up to achieve the desired impedance.

Trace Length and Routing: Keep the RF traces as short and direct as possible. Avoid sharp bends in RF traces. Use gradual curves or 45-degree bends to maintain signal integrity.

Grounding: A solid ground plane can minimize electromagnetic interference (EMI). It will also provide a low-impedance return path for signals. Ensure that the ground plane is continuous and covers the entire PCB, particularly around the Bluetooth module and associated components.

Thermal Management

Bluetooth circuit boards generate heat during operation. Excessive heat can affect the performance and longevity of the components.

Component Placement: Place heat-sensitive components away from heat-generating parts. This will prevent thermal interference for smoother operation.

Thermal Vias and Heat Sinks: Use thermal vias to transfer heat from the top layer of the PCB to the internal layers. Cooling methods like heat sinks may also be necessary to manage the heat generated by the board.

Testing and Validation

After designing the Bluetooth PCB, thorough testing must be done to ensure that the board meets the standards. Some of these tests are as follows.

Prototyping: Test your prototypes to evaluate the performance of the Bluetooth box and overall circuit design. Focus on signal strength, range, power consumption, and interference immunity.

RF Testing: Perform RF testing to verify the antenna’s performance. Use a network analyzer to measure the return loss, insertion loss, and other relevant metrics.

Compliance Testing: The Bluetooth circuit board must comply with regulatory standards. Some of these are FCC, CE, or Bluetooth SIG certification. Compliance testing helps avoid legal issues and ensures that the device can be legally marketed.

Firmware Optimization

The firmware controlling the Bluetooth module impacts the overall performance and power efficiency of the device.

Power Management: Optimize the firmware to manage the power modes of the Bluetooth module effectively. Implement sleep and wake-up routines as they will help minimize power consumption during idle periods.

Data Handling: Efficiently handle data transmission to reduce the Bluetooth module’s active time. This includes optimizing packet size, minimizing retransmissions, and reducing unnecessary data processing.

Documentation and Collaboration

Finally, maintaining clear and detailed documentation throughout the design process is essential for successful Bluetooth circuit board development.

Design Documentation: Document all design decisions, including testing results. This information is invaluable for future revisions, troubleshooting, and collaboration with other team members.

Collaboration Tools: Use PCB design software with a collaboration feature. Version control and cloud storage functions will help facilitate teamwork.

The post General Rule of Thumb for Bluetooth Circuit Board Design appeared first on Gogadgetx.

Reasons Why You Should Buy the iPhone 14

You Don’t Need to Go Pro to Go Big Anymore

In the past, Apple has always offered two different-sized iPhones. The standard size was perfect for most people, but if you wanted a larger screen or more features, you had to buy the iPhone Plus or Max. With the iPhone 14, that’s no longer the case. The new 6.1-inch OLED display is the biggest ever on an iPhone, and it’s absolutely gorgeous. Plus, with Apple’s new A14 Bionic chip, you’re getting the same processing power as the larger iPhone 14 Pro models. So if you’re looking for a big screen and powerful performance, the standard iPhone 14 is the way to go.

It’s Cheaper Than Ever Before

It solid Upgrade if You Don’t Have a 5G iPhone

The iPhone 14 is a great upgrade if you’re coming from an older iPhone, especially if you don’t have a 5G model. With the new A14 Bionic chip, you’re getting up to 50% faster performance than the previous generation. Plus, the new OLED display is brighter and more vibrant than ever before. And if you’re looking for better battery life, the iPhone 14 has you covered there too. With Apple’s new Intelligent Battery Optimization feature, you can get up to 5 hours more battery life on a single charge.

It’s Great if You Don’t Mind the Notch

The notch is now a Dynamic Island in the iPhone 14 Pro, however, for the normal iPhone 14, it’s still present and well. While Apple has been promoting its pill-shaped cutout of Face ID as the next major technology, the base iPhone 14 has a notch. It’s not necessarily a negative thing.

Although the Apple Dynamic Island function is amazing, it takes more of your screen than its iPhone 14’snotch. The Cupertino-based company tried its best to turn the feature into an option however when it comes down to playing videos or watching games it’s not as effective. Dynamic Island occupies more of your screen and not less.

You Probably Won’t Miss ProMotion

The iPhone 14 is the first non-Pro iPhone to feature an OLED display. And while it doesn’t have the higher 120Hz refresh rate of the Pro models, it still looks absolutely stunning. With brighter and more vibrant colors and improved contrast, the iPhone 14’s display is a joy to use.

While ProMotion could make things smoother while you’re scrolling around the iPhone’s home screen, or browsing through your social media, an ultra-high resolution screen isn’t going to make a huge difference when watching videos or many games.

Be aware that most films are shot in only 24 frames per second. That’s well lower than what 60Hz screens can show. The fastest YouTube videos can still be seen at 60FPS.

A display with 120Hz is pretty cool Don’t get us wrong however it’s not a deciding factor for regular users.

Emergency SOS Lets You Get Help Almost Anywhere

Have you ever been in a situation where you needed help but didn’t know how to get it? If you have an iPhone, you can now use the Emergency SOS feature to get help almost anywhere. With just a few taps, you can call for help from emergency services or your contacts. You can also send your location to your contacts so they can find you. The best part about Emergency SOS is that it’s easy to use and doesn’t require any special knowledge. Whether you’re in a dangerous situation or just need a helping hand, Emergency SOS can help you get the assistance you need.

Moreover, the iOS system on the new versions of the iPhone and Apple Watch, can detect an accident, fall, or any dangerous situation and independently call the police, ambulance, firefighters, and rescuers.

Crash Detection Could Actually Save Your Life

We all know how important it is to stay safe on the road. But did you know that your iPhone could actually help to keep you safe? That’s right – with the new crash detection feature, your iPhone can detect when you’ve been in a car accident and call for help. The feature uses the sensors in your iPhone to detect hard braking or acceleration, and if it senses that you’ve been in an accident, it will automatically call 911 and send a message to your emergency contacts. It will even share your location with first responders. So if you’re ever in an accident, help could be on the way – all thanks to your iPhone.

The post Why the iPhone 14 is the Best Smartphone for Your Money appeared first on Gogadgetx.

You will need some basic tools that are easily available online. You will need a Mac or Windows PC to set up applications that will help you with flashing firmware to your device.

Update: On 64-bit iOS devices, if you set the date “January 1, 1970” and reboot, they get bricked. Developers have reported that neither DFU restore nor recovery can unbrick this.

Tip: Remove bloatware from iPhone and iPad

How to fix a bricked iPhone, iPad, or iPod 

Like Google’s Android, where users can customize the operating system by rooting it and have full control over their device. People using iOS devices are not allowed to have full control over their devices as Apple’s iOS is a robust and steady operating system where users can only customize it by jailbreaking it through an unorthodox method or by interrupting a firmware update (Mostly preferred).

Symptoms of an un-functional (Bricked) iOS device:

• The system gets stuck on a black screen.
• The screen shows a battery logo with a red line, but the device is fully charged.
• You can see Apple’s logo on the panel for a brief moment and the device goes blank frequently.
• The display is stuck on a spinning wheel.
• The device will not start at all.

To make it clearer, if your phone has not stopped while installing a newer version of iOS because of insufficient battery power or any other factor, there are chances that your device can be restored as it is not actually bricked. For any reason or the reasons mentioned above, if your phone is bricked, then you can proceed below to get your query cleared, just charge your device so that it lasts for at least an hour or more.

You can speed up your iPhone, here is our detailed optimization guide.

Normal reset your device – simple reset for iPhone, iPad, and iPod

First of all, try something simple that is the easiest way and works for many. Mostly those users who are facing a spinning wheel on the display, those owners who see an Apple logo stuck on the screen, and if the device does not power ON.

You should:

1. First of all, press and hold the Home button (Center) + Power button until you see the Apple logo, or keep holding it for at least twelve seconds.
2. Next, release both buttons at the same time.
3. Further, you’ve to just wait until the menu screen loads.

If this doesn’t work then try the next method.

How to restore bricked iPhone, iPad, or iPod

Another way to restore a bricked iOS device is a complete restoration it is hectic but if you have no other option then what’s the harm in trying it. If you restore an Apple device you will have to use a previously saved backup of your files or in case you have no such option you’ll have to use a new iOS version. You should be aware that the data like settings, background, and all will be cleaned.

Further, you will even get sadder as Apple has a habit of restoring to the latest edition of iOS, one that cannot be yet jailbroken. There are versions of firmware available for your device available for direct download over the internet. You can flash the firmware to your iOS device, using iTunes.

Jailbreakers could make Custom Firmware for their device using tools like SnOwBreeze (for Windows) and PwnageTool (for Mac OS X), which is an already jailbroken iOS version that can be used.

Steps to restore an iOS device:

1. First of all, ensure that iTunes is installed and updated.
2. Now, connect your device to the computer using the original USB cable.
3. Open iTunes and then select the product from the left column.
4. Next, go to the summary section and then click on the “Restore” button.
5. Patiently wait for iTunes to download the latest iOS and then choose a backup to restore from or a new version if you want.
6. Wait until the device syncs.

BOOTING INTO RECOVERY

Simply restoring may not help you, when the Apple device is connected to a computer as you’ve tried above. Now, it’s time to try the iOS recovery mode, there is a hidden stock recovery pre-build in your iOS device that can help you with restoring to the previous state. Below we explained how to do so:

1. When your device is OFF, press and hold the Home + Power buttons together until the screen turns ON.
2. Now, connect your phone to the PC using a USB cable while keeping the Home button pressed.
3. When you see a screen iTunes icon and a USB cable, release the Home button.
4. Now, restore using the above-mentioned steps.

If the above methods do not repair your iDevice then you should try DFU mode. 

DFU method is one which is a sort of advanced instance of the device loader which is used by Apple to initially load up the firmware and other files. This has no secure protection, so inexperienced users or new ones may by mistake flash the wrong firmware or actually mess up the Bootloader when you are jailbreaking. Therefore, it is advised that you carefully handle your device when you are in DFU mode.

1. Switch ON your device.
2. Now, open iTunes and connect your device using a USB cable.
3. Next, press and hold the Home + Power buttons together for 10 seconds exactly, and then release the Power button.
4. Lastly, continue holding the Home button until iTunes detects your device in recovery mode.
5. Now, restore.

If you are an owner who finds the solution to your problem using this article, then we’ll be very happy. Also, let us know if you are in any kind of problem, we are here to help with your queries.

The post How to Repair a Bricked iOS device – iPad, iPhone or iPod appeared first on Gogadgetx.

If you want to remove the preloaded apps which are available on your Android device, then you can do that with any of the following three methods.

How to Remove Bloatware on Android phones and Tablets

First Method –

The preloaded apps cannot be uninstalled like regular apps on your Android phones. The user has to either block the preloaded apps or totally disable them.

Steps to disable/remove any pre-installed apps on your Android Phones

Step 1: Go to your phone’s setting menu.
Step 2: Then tap on the Apps menu and you will view all the apps present on your smartphone that will then appear on the screen of the device.
Step 3: Tap on any of the most used or regular apps where you will find the uninstall option. But, when you do or perform the same action for a preloaded app, you will see only the uninstall update options instead of the uninstall option.
Step 4: Then tap on it and uninstall all the updates of the selected apps. After completing this process successfully, you will view a Disable option for blocking the apps which you have done.

The above method is not an actual uninstalling process for a preloaded app. In this process, it will let you only disable particular apps so that you won’t run them next time.

Second Method –

If you have rooted your phone earlier then the root process in your Android device will perform this action at which you can uninstall or remove all the preloaded apps or data completely. But, first of all, you should keep in mind that the root process Will cancel your Android phone warranty.

Warning-  Deleting particular system apps can be the reason for breaking down your Android device. So do the root process at your personal risk only?

There are several Android apps that let users uninstall or disable apps on a rooted Android device. And personally, I will suggest you go for Titanium Backup as it offers users a lot of features. These apps also offer other useful features like the backup of all the apps and creating update.Zip files for restoring the phone in the previous stage if something goes wrong.  When you will tap on a system app within Titanium Backup, you will see the option to freeze or uninstall that app.

Third method –

This method is not so much used by the user because it is too complicated. In this method, rooting an  Android phone by Android users to delete preloaded apps is to use a terminal. As you know that Android is based on the Linux operating system. So it uses a terminal that is similar to the Command Prompt that Windows has and  you can download that Terminal Emulator from the Play Store and type in the following commands:

• su – this command obtains Super User privileges for the Terminal Emulator App
• mount -o remount,rw -t yaffs2 /dev/block/mtdblk3 /system
• ls/system/app – this command lists all the apps installed on your device
• rm /system/app/<app name> – use this command to remove any app you want
• mount -o remount,ro /dev/mtdblock3 /system

Tip: Optimize Android device for Performance

How to Remove Preloaded bloatware Apps on iPhone or iPad

iPhone OS is similar to Android OS, a stock iOS device that also includes many useless preloaded apps that most iPhone users don’t like. Therefore they like to uninstall or remove them immediately. These preloaded apps cannot be uninstalled or blocked by any conventional means.

If your device has not performed a jailbreak action with your iOS device then the only solution is to move all those unwanted preloaded apps in a single folder and hide it in a corner. And of course, these useless apps will not be seen by your eyes every time you open a home screen or access your iOS device for a long time.

And if you have done a Jailbreak action with your iPhone device then you can delete all the unused preloaded apps using a root method. But you need to be alert about the same warning like no one will be responsible to damage the device’s operating system. It may also cancel the warranty of your iOS device after deleting all the useless apps. To proceed further with the process at your own risk.

First of all, you have to open the Cydia store and download MobileFinder. Once you’ve downloaded this, navigate to /private/var/stash/Applications.xxXXXx and you will see a list of apps that are installed on your device. Once you find the app that you want to get rid of, tap and delete it and you have done it.

Tip: Speed up your iPhone with this easy guide

And you are done with your device’s application you want.

The post How to remove preloaded Carrier Bloatware and unwanted apps from Android and iPhone appeared first on Gogadgetx.

Xposed Framework is supported by all 11+ Android versions. Xposed framework modules are the best ways to change your system level without messing with codes or custom ROMs. It directly plugs into the Android OS to give complete control over the look and appearance of the device. All the changes can be reset to default settings if you disable these modules. We tried many modules on our Nexus Marshmallow device so that we can put the best Xposed frameworks for Marshmallow Android devices on this page.

Gravity Box:

GravityBox is one of the best modules for Xposed Framework available for Marshmallow ROMs. Gravitybox gives you complete freedom to customize your ROM with the features you want. It includes a ton of different tweaks which are used to fit your needs accordingly. Following are its various key features which make it amazing-

1. CyanogenMod’s controls
2. Custom settings for the status bar
3. More lock screen-related features
4. Control brightness using the status bar
5. Switch to quick settings automatically
6. Customize the color and style of icons
7. Skip music tracks using volume keys
8. Expandable volume section
9. Customize the notification style
10. Unlink notifications and volumes

Almost every part of the framework can be tweaked using this mode.

Amplify Battery Extender:

If you are really offended due to low battery life after updating to Lollipop/Marshmallow, then Amplify Battery Extender is your best solution. It actually controls how your device can wake up and how long can stay awake. It is highly recommended for battery savings, to customize every alarm and wake lock on your device.

Here are some it’s highlighted features that make it great-

1. A beautiful and sleek design
2. Stable Block Engine configurations
3. Broad measuring of time wasted and saved due to alarm or wake-locks
4. Descriptions of each and every alarm or wakelocks are available in many languages
5. With its pro feature, you can tame any alarm, service or wakelocks
6. Supports 20 languages
7. Task Integration: You can customize your task settings according to their occasions
8. Open the course database to watch how it works

It is really a great solution for you if you really have a quick battery drain problem.

Awesome Pop-up Video

Awesome pop-up Video is an amazing video player that can play the video in a pop-up square window floating on other apps windows. It is similar to YouTube pop-up window which floats and plays the video even if you are busy searching for others. It is a must for tablets for wider screens. It is not only a pop-up player when you are finished with your multitasking, but you can also definitely enjoy your videos with no distractions. It has a 5-minute viewing limit but you can upgrade to the pro version to remove this limit.

Following are the amazing features that make it one of the best video players-

1. Supports playlists and special eye candy for Xposed framework users.
2. A great Search-easy way for searching videos easily.
3. First Row tab: It is a one-tap stop hub for getting the trending videos.
4. Supports Chromecast: For external videos.
5. Custom Themes: You can customize your player to match your phone’s theme.
6. You can hide videos except the one from YouTube.
7. Snap Edges: When the player lies to any nearest screen edge, then it automatically snaps right to its edge.

It is an amazing app for multitasking people who really want to do multiple tasks simultaneously which includes watching videos.

SwipeBack: 

SwipeBack is a global swipe gesture tool to make the android interface easier to navigate. It replaces the need to tap the back button to go to the previous page. In other words, it acts as an Android library that finishes any activity using gestures. You can customize the swipe directions to left, right, top and bottom.

The following are its key features-

1. Globally supports swipe-back gestures
2. Settings to per-app
3. Customize your gesture settings

If you are frustrated with using the back buttons numerous times consistently to back many pages, then SwipeBack can make your navigation easier.

XPrivacy:

XPrivacy is the best module to avoid those programs which drip delicate and private information. It is used to limit the amount of information any app can access. There is various private information that must be limited to others like Contacts and locations. If you limit the data to be accessed then it sends vacant info back to the program. It doesn’t revoke any authorization from a program.

If you buy the pro license then you can avail of the following features-

1. Easily import or export settings across devices
2. Conveniently access the crowdsourcing restrictions
3. Allows only the selected applications and contacts
4. You can view functions in the data list usage
5. Manages the which/ blacklist files and other domains
6. Can execute batch commands
7. Rename and manage templates

If you launch the XPrivacy, then you can easily manage the limited data that others access.

Greenify: 

Greenify simply forces stop those apps which drain out the device’s battery. It shows you the battery-draining apps and the apps which have already been forced to hibernate. It is not just to root your device for using Greenify.

Greenify categorizes your System apps into three types-

1. Running in Background
2. Scheduled Running
3. May slow down the device when

Following are the steps to Greenify your apps-

1. Launch Greenify.
2. Go to the App Analyzer page.
3. Select the apps you want to greenify.
4. Check the mark at the upper right corner.
5. Press ok.
6. Click on “Create Hibernation Shortcut” to hibernate.
7. Click on the “Hibernate Now” button.
8. A pop-up appears that asks you to “Force Stop”.
9. Press OK.

Using Greenify and Amplify, you can save your battery to a great extent.

XStana:

It is an Xposed Framework module used for theming your Status and Navigation Bars. With a few clicks, you can easily customize your Status and Navigation Bar in your favorite ROM like a child’s play. It works only on rooted devices enrolled with the Xposed framework.

The following are its key features-

Status Bar Theme:

1. You can apply themes to icons of Wi-Fi, cellular data, alarm, signal, GPS, battery and, much
2. Adjust the selected icons to the theme.
3. You can choose which icons to theme.

Navigation Bar Theme:

1. Apply embedded themes on elements such as the back, home, search, menu, highlight, and much
2. Customize the personalized theme with your gallery photos on the back, home, search, recent, menu, highlight, background, and much
3. Customize the background, scales, and various buttons color with amazing themes.

BootManger: 

It is the first multiboot application for Android. Most of the apps take your system libraries and resources to load themselves whenever the device boots. These apps automatically start with your system booting which lengthens your booting time and decreases the overall performance.

You can install and boot ROMs from the SD Card and can boot between them with just a reboot option. This ultimately acts as a recovery module for your SD Card slots. You can install kernels, custom ROMs, and themes. You can use the normal recovery mode for your device ROM only. It acts as a smart task killer and keeps the less used apps pause until you need them. It automatically monitors the permissions of all the apps regularly.

Following are the steps to enable this module on your Android Xposed Framework-

1. Enable the BootManager module and reboot the device.
2. Launch the app.
3. An alphabetical list appears which displays all the installed apps.
4. Touch the app you want to exclude from the system startup.

You can customize more options on the Settings menu such as Fast Booting; don’t block any app and much more.

Zoom for Instagram: 

This module adds a major functionality to Instagram. Using the basic mode, you can add a small zoom button at the right corner of the comment button. You can also directly share the zoom button under each photo on Instagram. To open the image in full-screen mode for zooming the image, click the zoom button.

Following are the additional options available with zooming-

1. You can rotate left/right.
2. You can save it to phone storage.
3. You can share
4. Open in the browser.
5. Built-in integration

It gives a special bonus for the Xposed mod users that no watermark will be displayed if it opens from Instagram.

YouTube Background Playback: 

The most annoying thing about YouTube is that it doesn’t allow background play. If you are watching any video on YouTube and suddenly turn to another app, then the video gets paused. This module gives the most awaited functionality of a non-stop audio streaming music app.

As the name signifies, this app enables background playback in the official app. It doesn’t have any user interface hence, there is nothing that we can customize in this module. It is a simple and fair module that only activates in the Xposed framework.

We would love to know about your experience with these modules. Please feel free to tell us about any module you love and want to add to this list.

The post Best Xposed Framework Modules for Android appeared first on Gogadgetx.

Skyward is an IT company making specialized software to fulfill the requirement of K-12 school administration and management. Skyward has more than 1700 K-12 Schools district enrolled worldwide. Skyward also caters to a networking app and learning system that makes it easy for teachers, nurses, directors, Human resource managers, Students, and parents of collaborating and report various aspects.

Schoology is a social networking and online learning platform to improvise the environment of K-12 schools and high education institutions. It allows teachers to create courseware and assignment that can be followed by students.

Skyward FBISD Login www.fortbendisd.com login sign in

The process of login into the FBISD Skyward student or parent portal is very easy. You need to have your login details ready, you should also have a compatible browser on your mobile device or on your PC. We suggest using the latest Chrome or Internet Explorer. If you are on Mac, then you can use safari. Follow the procedure explained below:

Skyward FBISD student login:

If you are a student and already completed your online registration, then you can directly go online to login into the skyward portal. Just open the browser and visit www.fortbendisd.com and when the page renders you can see the “user sign-in” button on the top right of the webpage. Click it and you will be taken to a page where you will need to provide your username and password to login into the portal.

Skyward FBISD student online registration:

If you are a new student and yet not yet registered online, then first you will need to visit the school and complete the offline registration process first. You can find all the details about the registration process here.

Forgot Skyward FBISD password:

If you have forgotten your login details like username and password, then it is very easy to recover them. You will just need access to the email you have provided while registering online. Go to the login page as explained below and just below the login button you will find a button “forgot username/password”. Click on it and you will be taken to a page where you will need to provide the email id that you used for registration. After keying in your email, click “submit”. Now, you will receive an email with further instructions in your mailbox. If you are not able to see the message in your inbox then check the spam folder too.

Schoology FBISD Login:

If you are looking for a Schoology fbisd student login then you can visit this page.

Parents looking for Schoology fbisd parent login can visit here.

Skyward Family Access account:

If you are looking for FBISD skyward family access account then you will need to contact the school for offline registration first. You will have to fill a form and submit it to the school’s office. Do not forget to mention your correct email id on it. After the form submission, it may take up to 7 days for the school to create a login id for you. Once done you will be receiving an email about the login details and procedure in the email id you mentioned on the form.

The post Skyward FBISD login www.fortbendisd.com sign in family access fort bend ISD appeared first on Gogadgetx.

When you have devices that are budget cheap phones or tablets and you have fewer resources then it gets much harder to choose apps. We have tested and handpicked the apps, we are suggesting below that will prove very efficient for phones with low resources. These apps are beneficial to people who own a phone with a higher hardware configuration. These apps with maximize performance, improve battery life, and will help to free resources for the app that you want to use.

Tips: Best app to improve your Android device performance.

Must have apps for Android Phones and Tablets

Greenify: This is a well-known app for most of Android power users which identify and automatically hibernates the constantly running apps that hogs on power and battery. This app not only saves battery life but also bumps up the performance of system. When Greenify was first launched it did not provide auto hibernation feature to non-rooted users. But now, Greenify can automatically hibernate app, once you provide it rights using settings>>accessibility of your device. [Tutorial]

MX player: You can download and play almost all kind of video file on Android using MX player. It’s like VLC or KM Player for Windows users. Although, there is an Android version of VLC available but while testing we found that MX player is more stable and has more features than VLC for Android. There are some advanced features like hardware acceleration, pinch to zoom, subtitle, multicore decoding. You can play mp4, mkv, avi etc.

WPS Office: Everyone gets attachments on your email be it pdf, word file, excel file, or presentation, you will be able to open it all with WPS office. It is free and easy to use and supports file formats like .pdf, .docx, .xlsx, pptx etc. You can also share your office files via mail, or Evernote and you can back them up to preferred cloud storage.

ES File Explorer: File manager or explorer is a necessary app for Android devices. Manufacturers like Samsung, LG, and Asus are shipping their devices with a preinstalled version of their custom-made file manager but most of them seem to be boring. ES File explorer has much better UI and features. ES file explorer comes with a download manager, task killer, cloud storage client, application manager, and video player. If you have rooted your devices then you can use it as a “Root explorer” to access system files and edit them.

Superbeam: Do you keep transferring files between multiple devices or sharing them with friends? Superbeam makes Bluetooth file sharing very easy by leveraging NFC technology and Wi-FI Direct. If your phone or Tablet does not support NFC or Wi-Fi Direct, then you can share files via a Wi-Fi hotspot with another device. The Transfer speed is as good as 50Mbps.

Please feel free to suggest any app, that you think should get a place on this list. We will keep updating this list with new useful apps.

The post Must have apps for your Android phone or Tablet appeared first on Gogadgetx.

Best Android/iPhone apps to Watch Cricket Online – Watch live video or Scores

NexGTV app:

You want to watch IPL live on your phone. NexgTV has partnered with IPL 2014 to provide live video streaming of all the matches on the phone. NexGTV is available both on iOS and Android beside that Windows Phone and Symbian users can enjoy the app as well. For those who are facing issues with this app, we would suggest trying the Youtube channel “http://www.youtube.com/user/indiatimes“.

NexGTV Download for Android

Download NexGTV for iOS

Yahoo! Cricket App:

Yahoo! Cricket App is one of the best and you can have on your Android Smartphone, Yahoo! Cricket is a superb app that offers you to watch Cricket on the web. Yahoo! Cricket App comes with some very interesting and user-friendly features which you will not find in any other Android apps. Yahoo! Cricket App gives you the option to watch live scores of matches currently happening with an interactive scorecard and you can also see batting line-up so as to know partnerships. This app also gives you the option to see through the batting line-up to know about a partnership, who got out when, and who is coming up next with instant real-time updates of a live match no matter what you want to know 4, 6, and wicket. You also have the option to install the widget on your home screen and watch live cricket from your home screen along with detailed ball-by-ball commentary. View specially created photo galleries showing the latest from the world of cricket. To know more about the app or to download it check the link provided below.

Download Yahoo! Cricket App for free.

Download Yahoo! Cricket App for iOS.

ESPN Cricinfo App:

ESPN Cricinfo App is one of the nice apps that give you the most comprehensive cricket news and is updated across the world, it features almost entire international matches, domestic leagues, and ICC tournaments along with Champions League, Indian Premier League, and English county championship. ESPN Cricinfo is an ultimate app that has a customizable app along with a detailed ball-by-ball commentary with updated news and audio and video features. ESPNcricinfo is newly designed is available in geo-targeted editions packed with new scores and new scores. This app has improved live game coverage and many other unique features. To know more about the app or to download it check the link provided below.

Download ESPN Cricinfo App for Android.

Download ESPN Cricinfo App for iOS.

BCCI Mobile App:

BCCI Mobile App is an official BCCI app that features some nice and superb features and simple UI. This app features updates of the series live score, and Fixtures and it also gives you information about the stats, teams, players, news, pulse, exclusive interviews, and virtual replay. It is really a nice app with some very amazing and unique features. This app BCCI Mobile App is not the Indian Premier League matches but all the matches of India and also the CLT20 matches. To know more about the app or to download it check the link provided below.

Download BCCI Mobile App for Android.

Download BCCI Mobile App FOR iOS.

NDTV Cricket App:

NDTV Cricket App is an official app of NDTV which provides live coverage of both national and international matches of cricket with the latest and fastest news, stats, and photos. This app offers you stop notifications from More > Settings. NDTV Cricket App offers you the most updated and detailed cricket match coverage including ball-by-ball commentary photos, scorecards, and reports. NDTV Cricket App is one of the apps you must have on your Android devices or iOS. To know more about the app or to download it check the link provided below.

Download NDTV Cricket App for Android.

Download NDTV Cricket App for iOS.

Live Cricket Scores App:

Live Cricket Scores App is one of the most superb cricket LIVE score visualization app available for Android users. Live Cricket Scores offers you information about the Indian Premier League, All international T20, ODI, World Cup ODI match and Test Cricket matches. Live Cricket Scores App is a nice portable app with some really cool features and now it is available with IVE score push via GCM. Live Cricket Scores App is one of the most superb apps you must-have for your iOS and Android devices. To know more about the app or to download it check the link provided below.

Download Live Cricket Scores App for Android.

Download Live Cricket Scores App for iOS.

We are open to any suggestion or discussion, so please tell us about the app you liked and we would also like to know if you want to add some app to this list.

The post Best Live Cricket Apps For Android and iOS Phones appeared first on Gogadgetx.

Assists In the Reduction of Neck and Back Pain

When you sit for long periods, you risk developing diabetes, accumulating weight, developing back problems, and having bad posture. Over time, fatigue or back strain intensifies. Ignoring the discomfort might lead to spinal abnormalities or difficult-to-treat chronic back pain. As a result, you may buy a seat cushion for office chair that will support your back, reduce discomfort, and relieve stress. When you sit on your office chair for lengthy periods, you need to be comfortable. When you utilize memory foam cushions in your office chair, the materials adjust to your unique body shape, providing the necessary support and evenly distributing your body weight throughout the seat.

It Saves You Cash and Provides You with Comfort

When workers have seat cushions, they are more effective and alert. Consequently, they can perform more jobs with more accuracy. As a consequence, the entire performance of the firm improves. Employees will also be less gone if they are in a pleasant or healthy sitting position. As a result, the number of sick days is reducing. Seat cushions may help to cut down on the amount of payments made for work-related accidents. A seat cushion, which you can visit several trustworthy sites to know more about them, might make sitting more comfortably. In the office, you may work for a long period. It helps to keep leg, lumbar, and neck aches at bay. You will surely function in a very pleasant way if you use this.

Your Alignment Will Improve

Better posture affects the health and strength of your back. Poor posture can generate tension, leading to long-term back and neck issues, which can hurt your quality of life. When you have good posture, you lengthen your body, improve your look, and relieve your spine and neck pressure. By relieving the tension on your shoulders, lumbar, and neck, the seat cushion for office chair support your spine’s curve and posture. Spinal strength is necessary for a healthy spine and an active lifestyle. When you sit for lengthy periods, office chair pillows can help relieve back discomfort by supporting the spine and preventing additional injury.

Conclusion

There are various benefits to using a cushion for a chair, and using a cushion for an office chair is beneficial in various ways. Consequently, you should think about purchasing and using the softest cushion for your desk chair. You have to collect some basic information from a few pillows to know more about what you are purchasing.

The post Top Perks of a Seat Cushion for Office Chair appeared first on Gogadgetx.

In this article, we will discuss some of the best ways to efficiently connect Apple devices with each other. So, let’s start.

Convert HEIC Format to JPEG

HEIC stands for High-Efficiency Image Container. When you click an image from the camera of your iPhone or iPad, it gets saved into the device in the HEIC format. HEIC format allows saving high-quality images in a compressed form.

This file format is compact and saves almost half of the space in your device as saved in JPEG format. However, HEIC is not a common file format and is not supported by many major apps. Moreover, it is not compatible with running over major operating systems.

However, conversion is possible, and if you are thinking about how to change heic to jpg, you may refer to the online resources or third-party apps to make that task easier. You may also download and install Adobe Photoshop, add your files into it, and select go to Save as into JPEG format. 

Try the Universal Clipboard

The Universal Clipboard is a great feature that allows the user to copy their files from one device to another, such that your highlighted work from iPhone can be copied and pasted onto your Mac.

To use this feature, all you need to do is copy the text or file by pressing down Command + C keys, open the notes, and right-click; you will see an option to Paste. Select this option to copy and paste your file without even using any external device.

Keep in mind that the two devices should be connected to the same Wi-Fi. Also, both devices must be connected to the same iCloud and should be kept near to each other to share data using the Universal Clipboard.

Tether Your iPhone With Mac

When you are using your Mac, and you don’t have a regular or stable Wi-Fi connection, connect your cellular internet connection for your Mac. But keep in mind that your cellular network speed should be fast enough to work well on a Mac.

To use this feature, go to the Settings in your iPhone and tap on Personal Hotspot. Switch on the personal hotspot option to connect it with your Mac. You can even change your hotspot password from here. When it’s done, go to your Mac and click on the Wi-Fi symbol in the menu bar. You will see a list of all the nearby devices to connect. Select your device, enter the password, and you are all set to go.

Now you can use your cellular internet on your Mac. To disconnect this, simply go to the Wi-Fi symbol and click on disconnect in your Mac or switch off your personal hotspot from your iPhone.

Complete Your Unfinished Work With Handoff

Handoff is a feature in Apple devices that allows you to resume your unfinished work onto a different Apple device. Such as, if you have kept your work unfinished on your iPhone, you can resume it from where you left it onto Mac.

To use this feature, make sure your devices are connected with the same iCloud ID and ensure that the HandOff is enabled in both devices. To enable it in iOS, go to the Settings, click General, click on Airplay, select HandOff and turn it On.

On your Mac computer, click on the Apple menu, go to System Preferences, click on General, and click on Allow Handoff between devices. After that, open Safari or write something on notes and then switch onto the Mac; you will see an app icon with a small symbol. Click on it, and it will carry whatever you are doing on your iPhone. The same thing can be done from Mac to iPhone.

Make and Receive Calls on Mac

With Mac, you can also make and receive calls from your friends, family, relatives, etc. To use this feature, make sure both the devices are connected to the same Wi-Fi, same iCloud ID, and even to the same FaceTime account. That’s again an unmatched macOS and iOS advantage that Mac and iPhone users can enjoy.

After that, from your iPhone, go to the Settings, click on Phone, then select Calls on other devices, and tap Allow calls on other devices. On the Mac, go to FaceTime, navigate to Preferences, tap on Settings, and click on Allow calls from iPhone. Now whenever someone calls you on your iPhone, you will see a notification on your Mac as well.

You can also accept or decline the call from the Mac. If you want to make a call with Mac, simply search for the name or number in the search box. Click on that number and make a call.

The post Here’s How You Can Use Apple Devices Efficiently: 5 Ideas appeared first on Gogadgetx.