Gsm-and-Gadgets-Solutions

Nokia 5130 Contact Service Done By Nokia Best Ver 1.75 By Gsmmithun

2014-03-13T00:46:00.001-07:00

If you are just starting out and you don't have enough budget to start your mobile repair business, then you can start to flash Nokia using thing Nokia Best v1.75. I solved 5130 Contact Service using this software.

Here's what you need:

1. USB cable of 5130
2. Drivers for Nokia
3. Nokia Best Software
4. 5130 Firmware

Steps:

1. Download and install first the nokia drivers into your PC.
2. Download and run Nokia Best
3. Download and prepare the nokia firmware
4. Run the software and choose the setting in my picture below.
5. Power of the cellphone and connect the cable.
6. Click flash and power on the mobile when ask.
7. Install the drivers prior flashing the phone.
8. Wait until the phone flashed and reboot in normal.
9. Celebrate! Your phone now is back to factory settings.

Logs:

card found: A1B5CCE8
registered to: CycloneBox

Connect phone on selected interface...

Core : v1.51 , FlashEngine : v1.8

Selected FlashSettings : FullFlash
Check FlashFiles, Please, wait...

Files Set for Flashing :
MCU : rm495__07.97.mcusw
PPM : rm495__07.97.ppm_x
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Getting product info...
Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert cable & charger! ---
Connection opened successfully
Waiting for communication response.
ASIC ID: 000000010000022600010006030C192101033000
CPU ID : RAP3Gv3 , Features : No any extended features
RAP_PUB: 1E600017EC118C561C15E274410628867F1F803E
CMT_ROOT: 9DDBFCFE6E73CED7D8C6268C8EB85723
PatchRAWLoader: Patched OK
Processing RAWLOADER...
Processing UPDAPP...
Processing PASUBTOC...
TIME : Boot time : 00:00:06
Reopening the connection...
Waiting for response: 30
Waiting for response: 29
Waiting for response: 28
Waiting for response: 27
ADL -> [2nd] changing...
ADL Server confirm flashmode!
ADL : Check data
ADL : Data accepted
ADL : ASIC CMT select Ok
===Flashing [MCU]===
Erase : Processing rm495__07.97.mcusw
Found 6 areas to erase
Erasing area 0x00000000 - 0x000006BF, NOR, CMT
Result: 0000
Erasing area 0x000006C0 - 0x0001FFFF, NOR, CMT
Result: 0000
Erasing area 0x00040000 - 0x000BFFFF, NOR, CMT
Result: 0000
Erasing area 0x000C0000 - 0x0013FFFF, NOR, CMT
Result: 0000
Erasing area 0x00140000 - 0x0137FFFF, NOR, CMT
Result: 0000
Erasing area 0x01380000 - 0x0151FFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:02:28
Write : Processing rm495__07.97.mcusw
Total 1178 [1178/0/0] blocks to write, writing...
CMT : Writing Hash CERT [NOLO]
CMT : Writing Hash CERT [KEYS]
CMT : Writing Hash CERT [PRIMAPP]
CMT : Writing Hash CERT [PASUBTOC]
CMT : Writing Hash CERT [PAPUBKEYS]
CMT : Writing Hash CERT [UPDAPP]
CMT : Writing Hash CERT [DSP0]
CMT : Writing Hash CERT [MCUSW]
TIME : Write time : 00:01:47
MCU Write done
===Flashing [PPM]===
Erase : Processing rm495__07.97.ppm_x
Found 1 areas to erase
Erasing area 0x01520000 - 0x01DBFFFF, NOR, CMT
Result: 0000
TIME : Erase time : 00:01:06
Write : Processing rm495__07.97.ppm_x
Total 494 [494/0/0] blocks to write, writing...
TIME : Write time : 00:00:49
PPM Write done
ADL : End flashing

Flashing done!
Total flash time : 00:06:11
Reboot phone now...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.97 13-09-10 RM-495 (c) Nokia
IMEI: 358229038967025
PPM version : V 07.97 13-09-10 RM-495 (c) Nokia X
Product code: 0586824
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 21 certs
Data exist, skip certificate repair...
Battery voltage is enough for start
Set phone to Normal mode...

AfterFlash operations done ;D
Done!

Elapsed: 00:07:20

Connect phone on selected interface...

Android Share 2330 Too Many Pattern Step by Step Solution

2014-02-20T22:16:00.000-08:00

Hello again. Today I'm going to share to you how to solve this Android Share 2330 Too Many Pattern problem. In the past of my solution are manual format. Just like any smartphone android I just press either volume up or volume down plus power and then I could go to the setup where I could wiped and restart the tablet automatically.

Now this one is not the same. I tried my trick for 5 to 10 minutes but nothing works. Now here's my guide on how you could fix this problem.

Things you need:

1. Usb cable - To connect your tablet to your PC.
2. PC - where will run your software to reset/factory reset the tablet

Software you need:

1. Adbdriver Installer
2. Prince Android Toolkit V2

Procedure:

1. Power on your tablet and connect it to your PC. My computer runs Windows XP OS.

2. Install Adbdriver installer. After you install it you will the picture below to determine that you install it successfully and the tablet is detected to the computer.

3. Next Run Prince Android Toolkit V2. What you want to do here is to press number 5 and press Enter button. The Android will reboot and it will now reset to its factory settings.

Congratulations! You're done :)

Here's the output of my work.

Have a great day everyone!

How To Hard Reset Samsung GT-5300 Procedure Too Many Password

2014-02-12T02:17:00.000-08:00

Hello again! This is another easy solution for cellphone technician to earn money. Problem we are going to solve now is Samsung GT-5300 too many password attempt.

Ok follow the procedure below:

1. Remove the battery, simcard and memory card.

2. Replace battery.

3.. Hold volume down + Home button simultaneously

4. Power On and release the button power button upon startup.

5. After the phone goes into to recovery mode release volume down and home button.

6. From the menu select format data menu. Use the volume up/down to change menus and hit home button to select the menu. Wait for the phone finish its self resetting program.

7. Finally select reset menu and the phone now will reboot to factory settings.

I hope you follow this simple steps.

Ti'll my next blog see yah ;)

Cherry Mobile Jade "Wrong pattern" solution

2014-02-06T01:12:00.001-08:00

Hello again just want to share another solution for you here. This one is Cherry Mobile Jade "wrong pattern" problem. It's like too many password attempt problem. Check it out now.

This one took me literally 15 minutes. Most of the cherry mobiles hard solution can be found on the internet but these one I can't find any hint how to solve this problem.

When I tried to do the volume up + pwr on I was redirected to fast boot, normal boot and the other option , there's nothing change from the phone.

But when I tried the volume down + power on the phone boot to a bunch of chinese/korean language which I can't understand.

There's no other options but to try each command. On the sixth option I select it using power on and then press volume up 2x. The mobile reset on its own and now it is on its factory settings again.

I hope you get the tips how I solved it. Leave a comment below if you need help from solving this.

Cherry Mobile Flare S100 "Too many password attempt" solution

2014-02-06T01:00:00.000-08:00

I just received this Cherry Mobile Flare S100 "Too many password attempt" problem here in my shop. The best to solve this is to hard reset the unit. Check the step by step procedure here.

Steps:

1. Turn off the mobile.

2. Remove the battery and put it back again.

3. Press Volume up + power on

4. You will be ask to select your option from the menu. Select the "wipe data/factory reset" by using the volume up or down and by pressing power on button shortly.

5. The mobile will reformat the phone by itself.

6. You will choose now another option and that is to "reboot the phone".

Finally the phone will restart and will go to the actual initial setup. Perform the setup and you're are done solving "too many password attempt" problem.

Samsung Galaxy Y too many pattern done by hard reset

2013-09-16T21:51:00.000-07:00

Step by step procedure on Samsung Galaxy Y S5360 Hard Reset:

1. First turn off phone

2. Replace the battery again and do this Press and hold Home Button ( middle ) + Volume Up + power on button

3. Wait for 5 second until Android System Recovery menu appear

4. There are 4 options

reboot system now
apply update from sdcar
wipe data/factory reset
wipe cache partition

5. Move the options to " Wipe data / factory reset " using volume down ( - ) button and menu button to confirm, because the touchscreen doesn't work in reovery mode

6. After the process done, phone will reboot.

Congratulations you have reset your Samsung phone.

A848 duo My phone google account password solved by format

2013-09-10T23:19:00.000-07:00

Problem : Google account password
Solution: Hard Reset / Format

Procedure:

1. Press volume up + volume down + power on
2. Press volume up to select system recovery (use apps button to select)
3. Select wipe / factory reset
4. Select yes to delete all user data
5. Finally select reboot system now

Congratulations your A848i is ready for use.

Con

2680s security code remove by Jaf

2013-08-25T20:26:00.001-07:00

Hello today I removed a security code from a nokia 2680s. I used my old but still working jaf box using the cracked version of 1.98.65.

Tools needed:

1. Jaf box
2. Jaf software cracked ver 1.98.65
3. Data cable

Instructions:

1. Connect data cable to the 2680s phone and Jaf box
2. Run the software
3. Tick Chk
4. Tick info
5. Tick factory settings and click service
6. Celebrate you're done.

Here's the logs:

Getting MCU ID

MCU ID: 0x3162
FLASH ID0: 883C0020 <=> ST -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
FLASH ID1: 00010000 <=> Flash -> not used Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 0
First 16 bytes: AD 7E B6 1B 00 FF 10 40 00 00 00 00 00 00 00 00
Checking RAM for ALGO...
Algo is ready...
Checking FAID calculation...
P-key nokia module version 01.02
Done!
Phone Restarted...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 04.91
03-09-08
RM-392
(c) Nokia
HW version: 2001
PCI version:
UEM version: 4386
UPP version: 12642
RFIC version: 0500
DSP version: ICPR72_08w27_UPP
LCD version: SEIKO
PPM version: V 04.91
03-09-08
RM-392
(c) Nokia
IC
BT MCM version: 2222-143
Content Pack version: Content: ic
V 04.91
03-09-08
RM-392
(c) Nokia

Production serial number: IRD174491
Product code: 0567351
Module code: 0203726
Basic production code: 0556744
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 356390028850761
IMEI spare to net: 3A 65 93 00 82 58 70 06
IMEI SV to net: 33 65 93 00 82 58 70 16 F6
Master Code: 3213603630
Phone type: RM-392, Software version: 04.91, Language Pack: IC
User code: 12345

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-392.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0567351
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-392\

Searching for default location of ini...
Checking path: \Products\RM-392\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-392\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Done!
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 4 seconds...
Done!

Samsung Corby S5363 phone code problem

2013-07-27T04:23:00.000-07:00

Hello again dear readers; This time a phone was brought to me with a phone code or security code problem. It is Samsung Corby S5363 model. Follow my step by step procedure to reset the phone to factory settings.

Procedure:

1. First remove battery, SIM card and memory card.

2. Next insert battery and power on

3. Then using the phone call menu type the following code:

*2767*3855#

4.  Your phone will freeze and performs its self formatting function.  You will have to  wait until it restart.

5. Finally Celebrate! Your phone is back in normal function and condition.  All the settings are in factory setup.

   In case you don't know the security code will return to:0000

Till next time;

Regards;

My Phone a818 slim duo too many password attempt solution

2013-07-05T23:10:00.000-07:00

This phone just came in to my shop. My phone A818 slim duo. Problem is too many password attempt solution.

Follow the step by step procedure to format the phone and reset it to factory configuration.

1. Remove battery, SIM card and memory card from the phone.

2. Insert battery. Next press volume down + power on

3. A menu will appear you will want to choose recovery mode by pressing volume up button.

4. Another menu will appear this you will want to choose "wipe phone memory and reset" use the volume button and tap application button (left of home button). Wait for the phone to finish.

5. Finally select reset phone.

6. Enjoy your phone in its factory settings

Cherry Mobile Rave Too Many Pattern Attempts Solved

2013-07-01T01:47:00.001-07:00

This Cherry Mobile Rave was just brought today by a local customer. Phone is locked because of too many patterns attempt.

Follow the step by step solution below to reset to factory default (warning all data will be wiped out in your phone memory) :

1. Remove battery, SIM card, memory card and replace the battery again.

2. Hold power volume up + power on

3. A menu will display and you want to select wipe memory / reset factory mode. To this just press the volume up until it select the right option. To select the option press power on once and release.

4. Wait for the process to finish and see the next option. This you will want to select reset the phone. Using the volume up select the option and press power on.

5. This time the phone will reset and return to its factory default.

Enjoy your Cherry Mobile Rave... ;)

Myphone A919 duo password problem

2013-06-14T18:55:00.000-07:00

When you have Myphone A919 duo and you forgot your password just follow these simple steps I outline below. Happy formatting your Android phone.

Step 1. Remove battery, simcard and memory card

Step 2. Insert battery

Step 3. Press Volume Up + Volume down then power up

Step 3. Select recovery mode by pressing volume up

Step 5. Select format/swipe by pressing volume down and pressing menu button

Step 6. Wait for the process to finish

Step 7. Select reboot phone

Step 8. Celebrate you have now a factory reset A919 duo phone.

E2121b simlock problem

2012-03-15T16:09:00.000-07:00

Observation: When you insert SIM and turn on the the E2121b samsung phone simlock appears on the screen.

Solution: This can only be solve using a GSM gadgets. I use UST pro II.

Procedure:

1. Open UST pro. Select E2120. Uncheck bypass in TAT mode (new).

2. Connect data cable connecting the phone and the gadget.

3. Click read code and immediately power on the phone be use you have a full charge battery.

4. Wait for the program to finish.

5. Disconnect cables and samsung phone.

6. Turn on the mobile phone.

7. Insert the code. In this case I enter the code =86990430.

8. Phone will boot and Phone code is remove now.

Screenshot:

Back to: Cellphone repair tutorial

1280 light solution

2012-02-28T23:58:00.001-08:00

This is the 1280 light solution. It can be applied to 1616 and 1800 as well. Just trace the line to determine which connection is broken. This is recommended specially if you already replace LCD and LCD driver.
See the image below.

Back to: Cellphone repair problems and solutions

V3 insert sim problem and solution

2012-02-28T23:52:00.000-08:00

This V3 insert sim problem and solution is can be done by removing one crystal IC near the flex socket. See the image below to know which IC to remove.

Just reflow the VR1201 IC and pull out of the board gently. Be careful you might reheat the flex connector.

Back to: cellphone repair problem and solutions

Phone repair 6120 light pictures

2012-02-26T07:47:00.001-08:00

Here are various phone repair 6120 light pictures. You can use this as your guide in repair light problem on this type of model.

Now you can troubleshoot 6120c light problem using these phone repair 6120 light pictures.

Back to: Cellphone repair tutorial

Searching for phone...Found Reading SW version...Error reading rap ver!

2012-02-26T00:00:00.002-08:00

I was able to repair a dead phone by using dead usb mode in Jaf. All you have to do is to check the "dead usb" click flash, when ask to power on, insert battery and press power on.

See my logs here:

JAF version 1.98.64
Detected PKEY: 9000263A
Card life counter: 41.99%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B4, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-495\

Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\rm-607\Products\RM-495\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-495\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__06.65.image_el_blu
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red
APE Variant file: NONE
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Backing up CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Failed to backup CRT...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...06.94
Reading battery value...4958 mV
Init usb flashing...
Reading flashid...
CMT: 307E0001 <=> SPANSION -> Type not in database
APE: 00000000 <=> Flash -> not detected
Verifing ADL communication... Status byte 2
Scanning selected flash files...
Found CMT ULO server in flash file...
ADL->Loader: Update Application Loader -> Single Chip
Loader len: 308032, CHK: 0x0378
ADL -> Sending loader...
.................................................................................................................................................................
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 2252, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0137FFFF ... Erase result: 0000
Erasing cmt zone 01380000 - 0151FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el...
Erasing cmt zone 01520000 - 01DBFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red...
Erasing cmt zone 01DC0000 - 0215FFFF ... Erase result: 0000
Erasing cmt zone 02160000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.image_el_red...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 07.95
03-02-10
RM-495
(c) Nokia
APESW: (null)
VariantSW: (null)
Prodcode: 0571943
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
DCT4/BB5 counter: 769
Done!
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.ppm_el
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-495\rm495__07.95.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i
CNT Flash file: NONE
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Phone Type:
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i
APE Variant file: NONE
Languages in ppm: English,German,Russian,Bulgarian,Romanian,Ukrainian
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Not found!!!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
Searching for phone...Found
Reading SW version...Error reading rap ver!
Detected P-KEY: 9000263A
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
    Elf2flash 09.07.000
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting..............................................................................Loader Sent!
Stage 3 starting..................Phone prepared OK!
Waiting for the phone to boot...
Searching for phone...
Status byte: 8000
Selecting CMT flash...
Result: 0000
Phone is in flash mode...
CMT blocks: 3059, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw...
Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
Erasing cmt zone 00140000 - 0119FFFF ... Erase result: 0000
Erasing cmt zone 011A0000 - 0133FFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i...
Erasing cmt zone 01340000 - 01BDFFFF ... Erase result: 0000
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i...
Erasing cmt zone 01BE0000 - 01F7FFFF ... Erase result: 0000
Erasing cmt zone 01F80000 - 03FBFFFF ... Erase result: 0000
Send CMT CFG...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.mcusw...
Sending CMT HASH for NOLO
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for UPDAPP
Sending CMT HASH for DSP0
Sending CMT HASH for MCUSW
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.ppm_i...
Processing C:\Program Files\Nokia\Phoenix\Products\rm-436\rm436__07.23.image_i...
Rebooting...
Finishing CMT session...
Restarting CMT...
Pooling phone...
MCUSW: V 07.23
17-07-09
RM-436
(c) Nokia
APESW: (null)
VariantSW: (null)
Prodcode: 0566832
Setting test mode...
Setting FULL FACTORY...
Operation took 0 minutes 0 seconds...
Done!
Done!

Here is the screenshot:

Back to: Cellphone repair tutorial and solutions

6120c Unlocked using jaf and ufc v2 cable

2012-02-20T03:02:00.000-08:00

This phone was originally locked to globe. I successfully unlocked it using JAF and UFC V2 cable.

Here is the logs:

JAF version 1.98.66 beta5
Detected PKEY: 9000263A
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B4, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.36.0
Changing mode...Done!
Booting phone...
Error sync the phone...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...
Error sync the phone...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Booting phone...
Error sync the phone...
Booting phone...
Error sync the phone...
Booting phone...
Error sync the phone...
Booting phone...
FAST PHONE detected!

CMT Boot Data:
Asic ID: 000000010000022600010006400C192101021103
Asic Mode ID: 00
Asic EM ID: 00000B22
Asic Public ID: 19E00107F97D005830ED2799F3B008D3B538F442
HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE00000000
ROM ID: A8C1D6713E691FF8
CMT Boot File: C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_2nd.fg
Loader version: 09.30.00 -> Revision: 0200
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...
CMT Boot Ready
CMT Flash ID: 00000400 <=> Flash ID not in database
CMT Flash Data: NOT AVAILABLE
C:\Program Files\ODEON\JAF\Flash\RAPIDOv11_XSR15_alg.fg...
........Sending CMT HASH for PASUBTOC
.........................Sending CMT HASH for ALG
...........................Done!
CMT Loader Ready
Done!
Restarting phone...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Switching to serial...
Powering the phone...
Reading...
MCU SW version: V 03.83
18-06-07
RM-243
(c) Nokia
HW version: 0801
PCI version:
RFIC version: 17141715
DSP version: pb06w41v34.3_rm243
Retu version: 15
Tahvo version: 22
Production serial number: MIH771315
Product code: 0554022
Module code:
Basic production code: 0548116
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 359807011125908
IMEI spare to net: 3A 95 08 07 11 21 95 00
IMEI SV to net: 33 95 08 07 11 21 95 10 F7

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Searching for saved ini...
Checking for file C:\Program Files\ODEON\JAF\JAF_RM-243.ini
Saved INI not found, loading INI list...
Setting local mode...
Reading product code...
Product Code: 0554022
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\

Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\rm-607\Products\RM-243\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-243\
No ini files found...
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Done!
Backup simlock data first...
Setting local mode...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\RM-243_359807011125908_03.83_LCK_backup.pm
Done!
Reading simlock data...

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Reading data...
Booting phone...
FAST PHONE detected!
Loader version: 01.1E.00 -> Revision: 0000
Patching CMT boot step1...
Patching CMT boot step2...
Patching CMT boot step3...

SL20 Unlock codes:
#pw+481031687297423+1#
#pw+306413200611337+2#
#pw+109940104283462+3#
#pw+914780133297161+4#
#pw+623298710909064+5#
#pw+484624674756434+6#
#pw+155055613023971+7#
Uploading code to phone...
Waiting for phone...
Reading soft info...
Unlocking...
Reseting phone....
Waiting for phone...
Reading soft info...
Reading simlock data...

LOCK STATUS:

CONFIG KEY: 0000000000000000
PROVIDER KEY: 5150200000000000
Provider: Globe Telecom;Philippines
Key Code count: 0, FBUS Code count: 0

Block 1:
Lock 1: CLOSED -> Lock Data: 51502F
Block 2:
Lock 1: CLOSED -> Lock Data: 51502F

Done!

Using enter codes in the unlock setting of JAF and input the code. Then phone is fully unlocked.

Here is the image:

Back to: Cellphone repair tutorials

2600 No light on LCD solution

2012-02-15T03:11:00.000-08:00

As a beginner in repairing cellphone it will took you a lot of time to figure out 2600 no light problem. This post will guide how to repair it in no time.

I will provide here pictures search by me in the internet.

Picture 1.

Picture 2.

From the picture above you have to trace picture 2 in the schematic diagram (picture 1).

In this case I found out the I have an open line in Vled - . I use a jumper wire and connect it to the backlight referring the schematic diagram.

Back to: Cellphone repair tutorial - problems and solutions

T610 - T630 power switch ways solution

2012-02-13T00:01:00.000-08:00

You can refer to this picture in repairing T610 - T630 open pattern on switch.

Back to: Cellphone repair problems and solutions

3310 no signal problem and solution

2012-02-08T05:42:00.000-08:00

Hello again dear readers! Today is an old school repair from an old model the great 3310 in the old days.

This was brought to me by my customer with a dead battery. Upon inserting a new battery phone has power but no signal. Using the phone setting I tried to manual search but no luck there was not even a single service provider available.

Problem was solved by replacing the antenna switch: see my picture below.

Back to: Cellphone repair problem and solution

6020 intermittent signal - dropping signal

2012-01-31T00:24:00.000-08:00

History: This unit was brought to me by my customer.

Diagnostic:

1. After I disassemble the unit I found out the board is already repaired. The PCB board is full of flux and messy. Signal is dropping after I power on the unit. This symptons is usually a problem in the TX circuit. You can verify it by doing a manual search in the settings of your cellphone. If you could search all the service provider then TX is the problem.

2. I usually replace P.A. in this common problem.

Solution: Replace P.A. After replacing the amplifier the unit is working again. see the picture below.

Just replace P.A. part number N7700. Problem will be solved.

Back to: Cellphone repair problem and solutions

1600 no LCD light solution

2012-01-23T19:45:00.000-08:00

Problem: 1600 no light on display causing very dim LCD.

Solution:

Check for Vbat if there is a supply voltage (see the image below). If there is no voltage make a jumper connection from Vbat to the inductor from the picture provided below.

There is another solution but in this case this is the solution. Just in case there is a supply voltage and still there is no light in the LCD you may replace N2400 LCD driver IC.

Back to: Cellphone repair solution

3230 No power and local mode but finish flashing using any gadget

2012-01-14T03:49:00.000-08:00

Here is the one of the solution for cellphone that can be full flash but still will not power on or local mode. In this tutorial I encounter it in one my repair nokia 3230.

History: It was repaired from another cellphone repair shop. They only replace the battery terminal. it worked for an hour then suddenly it wont power anymore.

Procedure:

1. To be sure that the software is good I reprogram it using higher version of firmware available.

2. After flashing no local mode and the phone is still no power.

3. Carefully inspecting the terminal and using the multimeter I found out that BSI has no continuity. Using jumper wire I connect the BSI using the schematic diagram at jumper 136.

4. Now the phone has power then using software again full factory then mobile is perfectly working again.

see the missing connection below:

Back to: Cellphone repair solutions

Nokia 3110c signal problem solution

2012-01-12T20:22:00.000-08:00

There are many ways to solve signal problem in 3110c and this solution is one of the different solution to solve it!

To solve any signal problem in cell phone you need to determine first which part of the signal circuit is the problem. Signal is divided into two circuit the Receiver or Rx circuit and Transmitter of the Tx circuit.

To determine if Rx or Tx problem use the manual search from the cellphone. You can find it at the settings.
If the phone can search all the service provider you have a good Rx circuit and bad Tx or If there were no signal found you have a bad Rx and possible good Tx.

In this case I could search for all of the service provider.

What I did was I replaced the capacitor from the picture I provided below:

Back to:Cell phone repair