The post Automatic Gate Repairs appeared first on HB Paynter Gates Ltd.

The post Gate Service in Aspley Heath appeared first on HB Paynter Gates Ltd.

Our client wished to have a discrete gate automation system so opted for a 24v underground system from Nice UK. We installed a pair of the Big Metro 24v underground motors controlled by a Nice MC824H control board. Front and rear MOFB photocells were installed. The Nice 24v system includes inherent built in obstacle detection. Should an object by caught in the travel of the gates, the Cambridge Wooden Gates will detect the object and reverse travel.

To provide additional security, we supplied and installed an electric deadbolt to the centre of the gates. When the gates are given a command to open, the electric deadbolt releases before the gates begin to move. When the gates reach fully closed, the electric deadbolt fires back into the latch to ensure the gates cannot be forced open by hand.

Access through the Cambridge Wooden Gates is done so via a multi-button GSM intercom system and timed exit induction loop. Each button on The Videx GSM intercom system is programmed to dial through to a primary and secondary number. Once the end user has identified the person at the gateway they can open the gates with a press of a button on their telephone handset. A digital keypad is also housed within the intercom system allowing coded control of the gates such trusted users not have a remote control to hand. The other benefit of the GSM systems is that telephone numbers can be programmed into the unit to allow users to call the gates from their landline or mobile telephone which then triggers the gate to open.

The timed exit induction loop provides free exit for vehicles. When a vehicle passes over the loop the gates are given a command to open. The loop was neatly buried beneath the drive surface resulting in a discrete installation.

The final request from the client was to wire up a series of bollard lights running down the driveway so that when the Cambridge Wooden Gates are commanded to open the lights automatically switch on illuminating the way for trusted users and guests.

The post Cambridge Wooden Gates appeared first on HB Paynter Gates Ltd.

The automatic Bedfordshire Alumunium gates were installed with Beninca DU350NVE underground motors. The DU350 range of motors are a mains powered motor but with the added safety of inherent built in obstacle detection. The gates were hung towards the back edge of the brick piers with our bespoke built in wrap around hinges to remove any closing hinge gaps. Additional ASO 8.2 Ohm safety edges were installed to ensure all potential hazards were protected.

The Bedfordshire Aluminium Gates were installed with a multi-button BPT intercom system. The unit calls 12 individual properties whereby the residents can engage in conversation with the visitor before granting them access either through the automated aluminum vehicle gates, or by releasing the magnetic lock from the manual aluminium pedestrian gate. The intercom also had a trades button programmed to release the magnetic lock during certain times of the day. An exit push button was installed to allow residents the ability to freely open the pedestrian gate should a radio transmitter not be to hand. Finally the intercom system also housed a keypad to allow coded access to trusted users.

Entry and exit vehicle induction loops were installed to allow vehicles to simply drive up to the gates for them to open. The entry loop was installed with a timer to make the premises secure for only trusted persons during certain times. The vehicle induction loops were installed prior to the final driveway surface being laid in order to create a discrete installation.

The post Bedfordshire Aluminium Gates appeared first on HB Paynter Gates Ltd.

We supplied and installed an underground gate automation system from Beninca UK comprising of two steel foundation boxes, two underground motors, one control board, two infrared safety photocell beams, one radio receiver and two radio transmitter key fobs. When broken, the infrared safety photocell beams prevent the gates from closing onto a vehicle. This combined with additional safety features such as obstacle detection or sensitive edges to automatically reverse gate travel when an object is contacted ensures that the gates are safe and comply with the appropriate EU and British standards. All of our systems incorporate a simple lever manual override to allow access should you have prolonged power cuts.

Access control through the automatic wrought iron gates is done so via a GSM intercom system from Videx, an exit vehicle induction loop and exit keypad:

The ultimate solution for all audio intercom systems uses GSM technology to route visitors to any telephone of your choice, anywhere in the world. The outstation is effectively a mobile telephone and can be pre-programmed with a telephone number to dial. If there is no answer, the unit automatically tries a second number. This system requires no wiring to the premises and allows you to open the automatic wrought iron gates from your house, office, the corner of a field, or whilst on holiday. There are no limits!

In conjunction with the keypad on the intercom, we installed a standalone digital keypad as a means for regular trusted visitors and tradesmen to enter and leave a site. It allows control of the gates with the use of a four-digit code when a radio transmitter is not to hand.

An induction loop provides a means of free exit for vehicles by detecting changes in a magnetic field caused by large metallic objects. A vehicle approaching the automatic wrought iron gates is detected and the gate is commanded to open. The installation involves laying a loop of cable beneath the finished drive surface and back to the control panel for the gate automation. We re-finished the drive neatly resulting in a discreet installation. A timer was installed to disabled the loop at night.

The post Automatic Wrought Iron Gates appeared first on HB Paynter Gates Ltd.

We supplied and installed a 24v surface mounted gate automation system from Nice UK comprising of two 24v electromechanical operators, one 24v control board, two infrared safety photocell beams and two radio transmitter key fobs. When broken, the infrared safety photocell beams prevent the gates from opening or closing onto a vehicle. All of our systems incorporate a simple key manual override to allow access should you have prolonged power cuts.

We also supplied & installed a Logisty Wireless Intercom system and exit induction loop:

Improved technology allows us to dispense with conventional hard-wired intercom systems and the associated cost and inconvenience of cable routing. A high percentage of our intercom installations are wireless providing a cost–effective and flexible solution to access control.  Each system comprises of a slim surface mounted brushed stainless steel call station, a simple cordless white receiver telephone and a power supply unit.  The call station houses a call button that activates the receiver unit alerting you to a visitor’s presence.  You can then instigate a two-way conversation between the receiver unit and gateway and with the push of a button open the northwood metal gates.  The call station also houses a keypad to allow coded control over the gates should you or a trusted visitor not have a radio transmitter to hand.  In addition to reduced installation costs, you will also benefit from being able to answer calls from the gate on the move around the house and garden.

An induction loop provides a means of free exit for vehicles by detecting changes in a magnetic field caused by large metal objects.  A vehicle approaching the northwood metal gates is detected and the gate is commanded to open.  This function is fitted with a daily programmable timer to disable the auto exit at night or any time when security is needed.  The installation involved cutting a slot in the drive surface and laying a loop of cable.  We re-finished the drive neatly resulting in a discreet installation.

The post Northwood Metal Gates appeared first on HB Paynter Gates Ltd.

We installed bespoke decorative hardwood gate posts to match the Cambridgeshire Wooden Gates. The gates were installed with Beninca underground gate automation. All necessary safety equipment was installed to ensure the gates comply with current DHF guidelines. A Videx GSM Intercom System with integrated keypad was installed along with an exit induction loop for vehicles.

The Cambridgeshire wooden gates were finished in Sikkens light oak stain/preservative. All ironwork was painted in satin black. A large capacity post box was installed along with ground lights that illuminate the gate posts at night time via the control of a dusk till dawn sensor.

The post Cambridgeshire Wooden Gates appeared first on HB Paynter Gates Ltd.

Manufactured from tough twin-walled aluminium slats with an insulating core, the curtain is held in place with high performance webbing which gives extremely quiet operation and is unaffected by extremes of temperature. A strong extruded top slat and our unique locking mechanism effectively resist attack by would-be intruders.

The automatic garage doors are available in a choice of eighteen paint or wood-effect finishes and over forty textured woodgrain finishes, allowing you to match your door to existing paintwork or double-glazing for a coordinated look to your home. Looking for something different? The automatic garage doors can also be powder coated to any RAL or BS colour (at additional cost) giving you unlimited possibilities.

The automatic garage doors are supplied as standard with a SeceuroSense receiver with built in courtesy light, your choice of two key fobs an optical safety edge and an internal manual override.

Automatic Garage Doors are the natural progression after having automatic driveway gates installed.

The post Automatic Garage Doors appeared first on HB Paynter Gates Ltd.

We supplied and installed Beninca 24v gate automation with the inherent obstacle detection to the aluminium drive gates. Front and rear infrared photocells were installed to prevent the gates from closing onto a vehicle. The gates were then force tested to ensure they comply with the current DHF guidelines.

A GSM intercom system manufactured and supplied by Telguard was installed. The intercom system rings through to the landline, should no one answer the landline after a period of time, the unit automatically dials through to a secondary number, normally a mobile. The user can instigate a two way conversation with the intercom and give a command to open the aluminium drive gates via their telephone handset. The gate intercom system also houses a keypad to allow coded entry should a radio transmitter not be to hand. An internal keypad was also installed for the same reason.

The post Aluminium Drive Gates appeared first on HB Paynter Gates Ltd.

We supplied and installed Beninca 24v underground gate automation equipment. This system has the built in obstacle detection to provide protection to persons getting too close to the gates. Front infrared safety photocells were installed along with a safety/exit induction loop.

Access through the Aspley Guise Electric Gates is done so via a Telguard 2 button GSM intercom system with integrated keypad. The intercom was set up to ring two individual plots from where the end user can open the gates via their landline or mobile telephone.

The post Aspley Guise Electric Gates appeared first on HB Paynter Gates Ltd.