NEW HEADSPACE MEASURING TOOL !

noreply@blogger.com (Riflepro) — Tue, 21 Mar 2006 22:02:00 +0000

NEW HEAD SPACE MICROMETER AND GAUGE.

This Measuring tool is a Headspace Micrometer for Rifle smiths.
I call it the Precision Rifle smiths delight, due to it's attributes.The conventional method of headspace measuring is using a regular depth micrometer, which is accurate when it has solid support on both "wings" (lands) In the case of this old depth micrometer it sits on a small surface, that is head space gauge, and the measuring pin extends down onto the end of barrel stub,to take the measurement. The only problem here is that the Head space gauge is loosely fit in the chamber as all gunsmiths know,and can cant a little to the sides,this can give error of 0.05-0.10 mm.This "Rifle smith's Delight" is designed with a different land as the photos show. It is round and sits solidly on the barrel end and cannot cant to side,plus it's measuring depth pin contacts the head space gauge on CENTER.This tool gives constant, accurate measurements all the time.

Closer Image of Head space micrometer

The second attribute of this tool is to make up a enlarged version as shown here, to measure the whole length, of barrel stub to the end of headspace gauge. By doing this, the accuracy of the total measurement is even better. This speeds up the measuring process and gives more constant results. Gunsmiths don't have to rely on the old type of depth micrometer.

Measurements with as small error as possible are very important,in building the most accurate Bench Rest and competition rifles,and varmint rifles today.

As everyone knows the Bench Rest Riflesmiths are setting the standards in gun smithing all over the globe today. And should be given the credits they deserve, but seldom get.

Closer Image of larger version

It is my hope that this may be of some benefit to shooters and gunsmiths.

NEW MUZZLE BRAKE MANUAL BRS Custom Rifles

SILENCERBRAKE Website: GUN SILENCER FOR RIFLES AND PISTOLS

NEW SILENCER MANUAL. How to make silencer for rifles

GUN SILENCER MANUAL.DRAWINGS.

noreply@blogger.com (Riflepro) — Tue, 21 Mar 2006 01:11:00 +0000

SILENCER BLUEPRINT DRAWINGS.

INSTALLATION INSTRUCTIONS.

Silencer for rifles and pistols in cal.22 ,22 mag, cal.222, cal.243,
cal.6.5mm, cal.7mm, cal.308. And larger calibers of big bore.
Caliber like .357 cal 44 and cal 45 .
Air rifles and pistols. Complete Blueprint and instructions,
on how to make them and install .
Silences completely, with subsonic ammunition.
Subsonic speed is under 331.4 m/sec or 1087.3 ft/sec.
Over 30 years experience and use of this type of silencer
prooves the quality of sound suppression.
This design fits excellent for Paintball guns, simple and easy to clean and maintain.
In a rifle like 22 long rifle cal. with subsonic ammunition, the only
sound you hear is the fall of the firing pin !!!!!
COMPLETE MUZZLE FLASH HIDING !
Simple and easy to make and install.Download. Adobe PDF eBook with blueprint drawings. And instructions.

Buy Now $ 6.95

Gun Silencer Video.

BRS Custom Rifles. Copyright 2007 ,and
Patent Pending USPTO, UK IPO, EPO and other patent offices.
All Rights reserved.

MY WEBSITE.
Gun Silencer

New . How to make gun silencer

NOTICE!
Utilization is only allowed in Countries where the use of silencers is legal.Use only for target and hunting purposes.Misusing this drawing and information is of No responsibility to the owner of this website