Hobby Equipments

Resistor Kit - 1/4W

Mon, 06 Feb 2012 09:23:19 +0000

Resistor Kit includes 1/4 Watt, +/- 5% tolerance carbon film PTH resistors commonly used in breadboards and perf boards. Comes with 5 pcs of 73 different values.

This wide assortment of resistors makes a great gift for beginner and advanced electronics nerds! The Resistor Kit is a box full of many resistors that cover all the common values that you may need - very handy when prototyping because you don't know what value you'll need.

€14.99

Amplifier Transistor P2N2222AG NPN LP 40V TO92

Mon, 06 Feb 2012 09:23:19 +0000

Discrete semiconductor amplifier transistors (BJT) P2N2222AG, type NPN silicon.

€0.30 As low as: €0.27

ArduPilot Mega - Complete Kit

Mon, 06 Feb 2012 09:23:19 +0000

ArduPilot Mega is a pro-quality IMU autopilot based on the Arduino Mega platform, which will fly fixed-wing aircraft, quadcopters and (soon) helicopters, handling both autonomous stabilization and GPS navigation.

Regular Price: €249.00

Special Price: €210.00

Conductive Thread - 234/34 4ply

Mon, 06 Feb 2012 09:23:19 +0000

5 yards of high quality 4-ply Conductive Thread*.

This small quantity of Conductive Thread help people get into wearable electronics (LilyPad) without the upfront cost of buying an entire spool of thread. 10 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.

€2.99 As low as: €2.72

ArduPilot Mega - Arduino Mega compatible UAV Controller

Mon, 06 Feb 2012 09:23:19 +0000

The ArduPilot Mega is the newest version of autopilot board designed by Chris Anderson and Jordi Muñoz of DIY Drones using the ATmega1280.

Dimensions: 40mm x 69mm

Regular Price: €46.00

Special Price: €40.00

Arduino UNO Rev3

Mon, 06 Feb 2012 09:23:19 +0000

In addition to all the features of the previous board, the UNO Rev3 now uses an ATmega16U2 instead 8U2 as USB-to-Serial converter, 1.0 pinout and a stronger RESET circuit.

Made in Italy.

€24.20 As low as: €22.99

ATmega328 with Arduino Bootloader

Mon, 06 Feb 2012 09:23:19 +0000

An ATmega328 in DIP package, pre-loaded with the Arduino UNO Bootloader.

ATmega328 will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

€4.85 As low as: €4.40

Breadboard and Wire Kit

Mon, 06 Feb 2012 09:23:19 +0000

840 points plastic Breadboard for rapid prototyping and 70 wires kit, to create electrical connections without soldering.

€12.10

Polymorph - 250g

Mon, 06 Feb 2012 09:23:19 +0000

Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F).

So what do you do with it? Robotics, small-parts prototyping, arts/crafts, there's almost no end to what you can do with this stuff. Try embedding LEDs into it for a cool diffuse glow effect.

€11.90

Copper Tape - 5mm (50ft)

Mon, 06 Feb 2012 09:23:19 +0000

This copper tape is adhesive-backed, 5mm wide and comes in rolls of 50 feet.

€3.20

Super Bright LED - Blue

Mon, 06 Feb 2012 09:23:19 +0000

This Super Bright Blue LED 4,000mcd is very bright.

All lenses are clear.

€0.40 As low as: €0.34

Servo Extension Cable 5cm Female-Female

Mon, 06 Feb 2012 09:23:19 +0000

Servo Jumper (Female, double sided) 5 cm.

€1.50

3x8 Right Angle Pin Headers

Mon, 06 Feb 2012 09:23:19 +0000

Very useful 90 degree angle pin header for low profile applications.

€1.60

ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 (With pin headers)

Mon, 06 Feb 2012 09:23:19 +0000

This is the new ArduPilotMega IMU Shield!

This board features a large array of sensors needed for UAV and Robotics applications, including three axis angular rotation and accelerations sensors, absolute pressure and temperature sensor, 16MBits data logger chip and more!

ArduPilot Mega IMU Shield/OilPan Rev-H V1.0 is designed to fit on top (or bottom) of the ArduPilot Mega board, creating a total autopilot solution when a GPS module is attached.

This product INCLUDES all the pin headers needed!

€155.90

MediaTek MT3329 GPS 10Hz + Adapter Basic

Mon, 06 Feb 2012 09:23:19 +0000

The state-of-the-art 66 channels MediaTek MT3329 GPS Engine
High sensitivity: Up to -165dBm tracking, superior urban performance
USB/UART Interface
Build-in patch antenna for optimal sensitivity
DGPS(WAAS, EGNOS, MSAS) support (optional by firmware)
Maximum update rate: up to 10Hz (optional by firmware)
RoHS compliant

The following items are included with this product:
1 of EM-406/uBlox/MTK Adapter Cable 5 cm

€39.90

OptiVisor - binocular headband magnifier

Mon, 06 Feb 2012 09:23:19 +0000

Optivisor is a precision binocular headband magnifier which permits unrestricted efficiency while reducing eye strain, leaves both hands free, and allows three dimensional vision.

Used by anyone whose profession or craft requires close accurate work. Can be worn over prescription or safety eyeglasses.

€19.95

ArduIMU+ V2 (Flat)

Mon, 06 Feb 2012 09:23:19 +0000

Why '+' in the name? Because it's an Inertial Measure Unit (sensors and hardware filter circuitry) plus an Arduino-compatible processor that can run the Attitude Heading Reference System (AHRS) code, based on Bill Premerlani's DCM algorithm.

1 of 6 Pin Right Angle Male Header is included with the product ArduIMU+ V2 (Flat).

€88.40 As low as: €79.60

Temperature Sensor - TMP36

Mon, 06 Feb 2012 09:23:19 +0000

Low voltage, precision centi-grade TMP36 temperature sensor.

€1.48 As low as: €1.34

Momentary Push Button Switch - 12mm Square

Mon, 06 Feb 2012 09:23:19 +0000

Standard 12mm square momentary push button switch.
Breadboard friendly!

€0.50 As low as: €0.45

Kit for Arduino

Mon, 06 Feb 2012 09:23:19 +0000

The overall goal of this kit is fun.

Beyond this, the aim is to get you comfortable using a wide range of electronic components through small, simple and easy circuits. The focus is to get each circuit working then giving you the tools to figure out why.

Regular Price: €79.95

Special Price: €71.95

Break Away Headers - Straight

Mon, 06 Feb 2012 09:23:19 +0000

A row of Straight Headers - break to fit.

40 pins 0.43" long.

€2.26 As low as: €1.83

Buzzer - PC Mount 12mm 2.048kHz

Mon, 06 Feb 2012 09:23:19 +0000

Small 12mm round buzzer that operates around the audible 2kHz range.

€1.20 As low as: €1.09

Triple Output LED RGB

Mon, 06 Feb 2012 09:23:19 +0000

Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED?

These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors!

€1.99 As low as: €1.80

Mini Photocell

Mon, 06 Feb 2012 09:23:19 +0000

These little sensors make great ambient light triggers (when light in the room turns on, do something).

Dimensions:

2 x 4 x 5 mm
4 mm between pins
31 mm lead length

€1.20 As low as: €1.09

Relay SPDT Sealed - 5VDC

Mon, 06 Feb 2012 09:23:19 +0000

High quality Single Pole - Double Throw (SPDT) sealed relay. Use it to switch high voltage, and/or high current devices.

Image for illustrative purposes only.
Brand and product code may vary, but not the technical specifications.

€2.30 As low as: €1.97

Diode Rectifier 1N4001 - 1A 50V

Mon, 06 Feb 2012 09:23:19 +0000

This is a simple, very common rectifier diode.

€0.10 As low as: €0.08

Shift Register 8-Bit - 74HC595

Mon, 06 Feb 2012 09:23:19 +0000

Simple shift register IC. Clock in data and latch it to free up IO pins on your micro.

€1.10 As low as: €0.99

155mm M/M Premium Jumper Wires

Mon, 06 Feb 2012 09:23:19 +0000

Sparkfun Electronics 155mm long male to male jumper wire, perfect for solderless breadboards.

10 wires per pack
2 x red, black, green, blue, yellow

€4.00 As low as: €3.83

155mm M/F Premium Jumper Wires

Mon, 06 Feb 2012 09:23:19 +0000

These are 155 mm long jumpers terminated as male to female. Comes as 1 package of ten jumpers (2 x red, black, green, blue, yellow).

€4.00 As low as: €3.83

155mm F/F Premium Jumper Wires

Mon, 06 Feb 2012 09:23:19 +0000

These are 155 mm long jumpers terminated with female connectors on both ends. Comes as 1 package of ten jumpers (2 x red, black, green, blue, yellow).

€4.00 As low as: €3.83

EasyDriver Stepper Motor Driver

Mon, 06 Feb 2012 09:23:19 +0000

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse.

EasyDriver requires a 7V to 30V supply to power the motor, and has an on board voltage regulator for the digital interface. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control!

EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4, 6, or 8 wire stepper motors.

€11.50 As low as: €10.45

Toy DC Motor with Leads

Mon, 06 Feb 2012 09:23:19 +0000

This is a small toy DC motor with about 29.5 mm long leads. It has a small circular shaft which measures about 2.8 mm long.

€1.95

Stepper Motor with Cable

Mon, 06 Feb 2012 09:23:19 +0000

This is a simple, but very powerful stepper motor with a 4-wire cable attached.

€16.90

Servo - Small

Mon, 06 Feb 2012 09:23:19 +0000

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55.

Includes hardware as shown.

Dimension:

22.8 x 11.8 x 20.6 mm
Weight: 9g

€8.20

Breadboard Clear Self-Adhesive

Mon, 06 Feb 2012 09:23:19 +0000

Ever wonder what goes on inside these things? Well this clear bread board might enlighten.

Dimensions: 3.29 x 2.15 x 0.33″ (83.5 x 54.5 x 8.5mm)

€4.95 As low as: €4.50

Battery Holder 2xAA with Cover and Switch

Mon, 06 Feb 2012 09:23:19 +0000

This 2xAA battery holder puts a nice finishing touch on your battery powered project.

Dimensions: 67.9 x 32.8 x 18.25mm

€1.40 As low as: €1.27

9V to Barrel Jack Adapter

Mon, 06 Feb 2012 09:23:19 +0000

This simple cable has so many uses!

Plug a 9V battery into one end and connect the other end to anything with a 5.5x2.1mm, center-positive barrel jack.

€2.60

Basic 16x2 Character LCD

Mon, 06 Feb 2012 09:23:19 +0000

This is a Basic 16 Character by 2 line 5V LCD display with Black text on Green background.

SparkFun Basic 16x2 Character LCD utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight.

Dimensions: 3.15" x 1.425"

€12.68

Arduino and Breadboard Holder

Mon, 06 Feb 2012 09:23:19 +0000

You've been waiting on this forever and here it is! This is a simple plastic plate that holds an Arduino (Duemilanove or Uno) and self adhesive clear breadboard.

€3.50

FTDI Basic Breakout - 5V

Mon, 06 Feb 2012 09:23:19 +0000

This is the newest revision of the FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

€13.00 As low as: €11.70

OpenLog

Mon, 06 Feb 2012 09:23:19 +0000

OpenLog is an open source data logger. Simple to use, simple to change.

Features:

Log to low-cost microSD cards up to 2GB
Simple command interface
Edit CONFIG.txt file from a computer to change baud rate and other system settings
Configurable baud rates (2400 to 115200bps)
Configure unit through config file or the menu system
Doesn't drop characters even at full-blast 57600bps
Power, ground, and RX-I are the minimum connections
Reprogrammable ATmega328 using the standard STK500 serial bootloader
Two LEDs indicate writing status
Input voltage from 3.3V to 12V
2mA idle, 6mA at maximum recording rate

Dimensions: 0.16 x 0.6 x 0.75″ (4 x 15 x 19mm)

€22.50

Arduino Pro Mini 328 - 3.3V/8MHz

Mon, 06 Feb 2012 09:23:19 +0000

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini 328 - 3.3V/8MHz! SparkFun's minimal design approach to Arduino for a cheap Arduino board.

The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

€16.90 As low as: €15.25

Arduino Pro Mini 328 - 5V/16MHz

Mon, 06 Feb 2012 09:23:19 +0000

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini 328 - 5V/16MHz! SparkFun's minimal design approach to Arduino for a cheap Arduino board.

The Arduino Pro Mini is like the Arduino Mini (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

€16.90 As low as: €15.25

Key Switch

Mon, 06 Feb 2012 09:23:19 +0000

Have you ever wanted to start your widget the same way you start your car?
These small switches are the 'key' to making that happen.

€0.80

Trimpot 10K with Knob

Mon, 06 Feb 2012 09:23:19 +0000

10K trimmable potentiometer with a small built-in knob.

Perfect for your next LCD contrast adjuster, opamp setting, or volume level.

€1.25 As low as: €1.13

Basic Red LED 5mm

Mon, 06 Feb 2012 09:23:19 +0000

This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

€0.28 As low as: €0.24

Basic Green LED 5mm

Mon, 06 Feb 2012 09:23:19 +0000

This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

€0.28 As low as: €0.24

Basic Yellow LED 5mm

Mon, 06 Feb 2012 09:23:19 +0000

This is a very basic 5mm LED with a yellow lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.
Suggested using current: 16-18mA.

€0.28 As low as: €0.24

4-Digit 7-Segment Display

Mon, 06 Feb 2012 09:23:19 +0000

This is a basic, 4-digit 7-segment display - green in color. It has a common anode. The display features one decimal point per digit, and individually controllable apostrophe and colon points.

Dimensions:

Overall Display: 40.18 x 12.8 mm (1.58 x 0.50")
Digit Height: 10mm (0.39")

€1.75

7-Segment Red LED Display

Mon, 06 Feb 2012 09:23:19 +0000

A basic 7-segment Red LED Display (SparkFun). Common anode. Two decimal points, but only the one on the right is wired.

Digit height is 0.6".
Overall height is 1".

€1.15 As low as: €1.05

USB Cable A to B - 6 Feet

Mon, 06 Feb 2012 09:23:19 +0000

Standard issue USB 2.0 cables.

Dimensions: 6 Feet

€2.30 As low as: €2.09

Logic Level Converter

Mon, 06 Feb 2012 09:23:19 +0000

The SparkFun logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V.
This level converter also works with 2.8V and 1.8V devices.

Bread board friendly!
Can be used with normal serial, I2C, SPI, and any other digital signal. Does not work with an analog signal.

Dimensions: 0.5 x 0.6″

€1.80 As low as: €1.62

Breakout Board for FT232RL USB to Serial

Mon, 06 Feb 2012 09:23:19 +0000

Basic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC!

Dimensions: 0.9x1.25″.
Board comes assembled with IC as shown.

€11.30

Dual-axis Accelerometer Memsic 2125

Mon, 06 Feb 2012 09:23:19 +0000

The Memsic 2125 is a low cost, dual-axis thermal accelerometer capable of measuring tilt, acceleration, rotation and vibration with a range of ±3 g.

Compatible with other popular accelerometers.

Dimensions: 0.42 x 0.42 x 0.45" (10.7 x 10.7 x 11.8 mm).

€35.00

Mosfet Irf520 NPbF N-CH 100V 9.7A TO-220AB

Mon, 06 Feb 2012 09:23:19 +0000

HEXFET® Power Mosfet Irf520 NPbF 100V 9.7A in TO-220 package.

€1.33 As low as: €1.20

Diode Rectifier 1N4007 - 1A 1000V

Mon, 06 Feb 2012 09:23:19 +0000

Discrete semiconductor diode rectifier 1N4007 1A 1000V.

€0.10 As low as: €0.08

Optocoupler 4N35 DIL-6 package

Mon, 06 Feb 2012 09:23:19 +0000

Phototransistor optocoupler 4N35 with base and in a 6-pin DIP package.

€0.38 As low as: €0.34

Buzzer Piezo 2.5kHz 30MM PC MT

Mon, 06 Feb 2012 09:23:19 +0000

Buzzer Piezo 2.5kHz 30 mm, series Sonalert®.

€2.20 As low as: €1.98

Transistor BC547 NPN 45V 100mA TO-92

Mon, 06 Feb 2012 09:23:19 +0000

Transistor (BJT) BC547 NPN, 45V 100mA.

€0.35 As low as: €0.31

Rotary Potentiometer - Linear

Mon, 06 Feb 2012 09:23:19 +0000

This is a center-tap linear type rotary potentiometer. The outer two pins will always show 10K resistance, the center pin resistance to one of the outer pins will vary from 10K Ohm to about 50 Ohm. The pot is linear meaning the resistance will vary linearly with its position. This is a good choice for general user interfaces.

€1.20 As low as: €1.08

XBee Pro 900 RPSMA

Mon, 06 Feb 2012 09:23:19 +0000

The XBee-PRO 900 RF module is ideally suited for low-latency point-to-multipoint networking applications.

Capable of point-to-point, peer-to-peer and point-to-multipoint networking, the XBee-900 is ideal for solutions where RF penetration and absolute transmission distance are paramount to the application.

€68.40

Breakout Board for Electret Microphone

Mon, 06 Feb 2012 09:23:19 +0000

This small Breakout Board couples a small Electret Microphone with a 100x opamp to amplify the sounds loud enough to be picked up by a microcontroller's Analog to Digital converter.

€8.20

Standalone AVR ISP Programmer Shield Kit - includes blank chip!

Mon, 06 Feb 2012 09:23:19 +0000

This shield kit pack will allow you to turn any Arduino into an AVR chip burner!

€21.90 As low as: €19.80

Mini Volt Meter

Mon, 06 Feb 2012 09:23:19 +0000

Put a voltage meter anywhere with this very handy display. These are often used by RC hobbyists for keeping track of batteries but we thought it would be great on a breadboard or enclosure.

€9.90 As low as: €8.95

VCNL4000 Proximity/Light Sensor

Mon, 06 Feb 2012 09:23:19 +0000

The VCNL4000 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project.

€18.50 As low as: €16.68

Arduino on a Breadboard Kit

Mon, 06 Feb 2012 09:23:19 +0000

This kit contains all the needed components and a small manual to build an Arduino compatible breadboard with an Atmel Atmega328.

The kit also allows you to power the ATmega independently, eliminating the need to keep the project connected to the Arduino.

The components for the connection via USB are optional. Breadboard not included.

Regular Price: €9.95

Special Price: €8.95

Sharp GP2D12 IR Range Sensor

Mon, 06 Feb 2012 09:23:19 +0000

Infrared rangefinder 10cm (~4") to 80cm (~30"). Widespread in robotics for its qualities of precision and accuracy.

Analog Interface
Lead free, ROHS compliant

€15.00

DS1307 Real Time Clock Breakout Board Kit

Mon, 06 Feb 2012 09:23:19 +0000

This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost.

DS1307 breakout board is a kit and requires some light soldering which should only take about 15 minutes.

Images by adafruit - Adafruit website.

€12.90 As low as: €11.65

XBee Adapter kit - v1.1

Mon, 06 Feb 2012 09:23:19 +0000

This adapter board is designed to make adding wireless point-to-point or mesh networking easy.

XBee Adapter kit does not include an XBee module and comes unassembled.

€11.95

Li-Ion/Polymer Battery Charger/Balancer - 50W, 5A

Mon, 06 Feb 2012 09:23:19 +0000

The intuitive menu system of the Li-Ion/Polymer Battery Charger/Balancer means charging and cycling is an easy process and can be done quickly and accurately either in the field, by using a 12V input such as a car battery, or at home with a 12V power supply.

€38.60

Max Power IR LED Kit

Mon, 06 Feb 2012 09:23:19 +0000

Infrared LEDs are awesome. Along with an IR receiver they can be used for remote control and even basic remote data communication.

Simply solder together this easy through-hole kit and you can switch the LED using a transistor.

€2.99

ArduPilot Shield V2 Kit

Mon, 06 Feb 2012 09:23:19 +0000

ArduPilot Shield V2 Kit is a great deal because this shield kit includes everything you need:

ArduShield Board, with MPXV7002DP sensor.
Female Pin Headers.
Male Pin Headers.
Pitot Tube.
Custom made FMA cable.
Housing Connector Header
3 Servo Extension.
Bing Plug.
Reset button.
Extra wire.

€48.00

Kit MPXV7002DP

Mon, 06 Feb 2012 09:23:19 +0000

Stand-alone airspeed sensor that includes Pitot Tube and Servo Cable.

€20.60

3x16 Right Angle Pin Headers

Mon, 06 Feb 2012 09:23:19 +0000

Very useful 3x16 90 degree angle pin header.

€2.20 As low as: €1.98

FTDI Cable 3.3V

Mon, 06 Feb 2012 09:23:19 +0000

This a practical and easy to use FTDI cable 3.3V.

€18.00

High Temperature Adhesive Tape - (1cm, 33m)

Mon, 06 Feb 2012 09:23:19 +0000

33 meter roll of polyimide tape, a fantastic insulator for components inside of an enclosure that might be subjected to extreme conditions.

€4.50

Mux Shield

Mon, 06 Feb 2012 09:23:19 +0000

The Mux (Multiplexer) Shield adds the capacity for up to 48 inputs or outputs on the Arduino and Arduino Mega.

€26.62

Music Instrument Shield

Mon, 06 Feb 2012 09:23:19 +0000

The Music Instrument Shield is an easy way to add great sounding MIDI sound to your next Arduino project.

€26.80

Arduino Nano

Mon, 06 Feb 2012 09:23:19 +0000

The NEW version of Arduino Nano 3.0 is here!

ATMEGA328 (more flash and ram memory)
Blue power LED is on the top
A0-A7 pins compatible with Arduino Stamp and Pro Mini
Two layers PCB
Lower cost
Easier to hack the Eagle file

€39.93

LilyPad Arduino Main Board

Mon, 06 Feb 2012 09:23:19 +0000

The Arduino LilyPad is a microcontroller board with wearable
e-textile technology creatively designed to have large connecting pads to allow them to be sewn into clothing.
Various input, output, power, and sensor boards are available.
They're even washable*!

€22.80

SparkFun Inventor's Kit Overlays

Mon, 06 Feb 2012 09:23:19 +0000

These are small slips of paper that are placed on top of a breadboard and held in place with headers.

They show beginners where to plug wires to create the circuits included with the SparkFun Inventor's Kit. If you've already got the parts, we figured you might want the overlays by themselves.

€2.90

7-Segment Red 6.5'' Display

Mon, 06 Feb 2012 09:23:19 +0000

7-segment red 6.5″ display.

€14.50

900MHz Duck Antenna RP-SMA

Mon, 06 Feb 2012 09:23:19 +0000

900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units.

50 ohm impedance. 105 mm long.

€7.30

XBee Pro 900 Wire Antenna

Mon, 06 Feb 2012 09:23:19 +0000

€56.20

Infrared LED - 850nm

Mon, 06 Feb 2012 09:23:19 +0000

This is a very simple, clear infrared LED.

€0.72 As low as: €0.65

Force Sensitive Resistor

Mon, 06 Feb 2012 09:23:19 +0000

This is a Force Sensitive Resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance.

When no pressure is being applied to the FSR its resistance will be larger than 1MΩ. This Force Sensitive Resistor can sense applied force anywhere in the range of 100g-10kg.

Dimensions:

Overall length: 2.375"
Overall width: 0.75"
Sensing diameter: 0.5"

€7.25

Trimpot 100K

Mon, 06 Feb 2012 09:23:19 +0000

Trimmable potentiometer that varies in resistance from 0 to 100K Ohm.

€0.95 As low as: €0.86

Danger Shield

Mon, 06 Feb 2012 09:23:19 +0000

The Danger Shield mounts on top of your Arduino or Arduino Pro and equips it with a variety of fun and useful inputs and outputs.

This new version uses a different temperature sensor. This product comes as a kit of parts, which you'll have to solder into the included PCB. All parts are through-hole so it should go together relatively easily; but always check your component orientation before soldering!

€25.70

ATMega328

Mon, 06 Feb 2012 09:23:19 +0000

Microcontroller 8 bit, AVR, 32K flash and 28 pin DIP.

€4.35 As low as: €3.95

ATmega328 with Arduino Duemilanove Bootloader

Mon, 06 Feb 2012 09:23:19 +0000

An ATmega328 in DIP package, pre-loaded with the Arduino Duemilanove Bootloader.

ATmega328 will allow you to use Arduino code in your custom embedded project without having to use an Arduino Duemilanove board.

€4.85 As low as: €4.40

Stackable Headers - 6 and 8 Pin

Mon, 06 Feb 2012 09:23:19 +0000

Pair of a 8-pin and a 6-pin female/male stackable header, with extra long legs. Great for stacking Arduino shields.

Pins are spaced by 0.1".

€0.72

KIT Workshop - Base Level

Mon, 06 Feb 2012 09:23:19 +0000

The Kit includes all parts to partecipate to an Arduino Workshop.

Save your money:
customize your kit adding an Arduino UNO board!

€36.30

Shield - Motor KIT

Mon, 06 Feb 2012 09:23:19 +0000

This full kit allows to the Arduino boards to drive 2 12V DC motors.

€24.20 As low as: €23.10

Arduino Duemilanove

Mon, 06 Feb 2012 09:23:19 +0000

This is the original Arduino Duemilanove. It's awesome, but it's been recently replaced with the new Arduino UNO.

The Arduino Duemilanove board is an incredibly low-cost, easy to use microcontroller board for use with almost any electronic or robotic project.
The Arduino Duemilanove is essentially a robot "brain" able to send and receive signals and then take action based on calculations and logic. It is up to the user to program and download the necessary code, but not to worry... there are many ready to use examples available online!

Made in Italy.

Regular Price: €26.62

Special Price: €21.78

Arduino MEGA

Mon, 06 Feb 2012 09:23:19 +0000

The Arduino MEGA Microcontroller Module, based on the ATmega1280, has specialized library functions for robots, multiple serial communication lines and multiple power options.

Regular Price: €59.29

Special Price: €46.90

Arduino Mini

Mon, 06 Feb 2012 09:23:19 +0000

Space is gained with this new Arduino Mini Microcontroller Module with ATmega328 (memory: 32K).
This device is quite a bit smaller and requires an external serial connection for programming, like the Arduino Mini USB Extension.

€24.20

Arduino Mini Light

Mon, 06 Feb 2012 09:23:19 +0000

Space is gained with this new Arduino Mini Light Microcontroller Module with ATmega168 (without connectors).
This device is quite a bit smaller and requires an external serial connection for programming, like the Arduino Mini USB Extension.

€20.57

Arduino Xbee Shield

Mon, 06 Feb 2012 09:23:19 +0000

The Arduino Xbee Shield Wireless Module allows an Arduino USB board to communicate wirelessly using a Zigbee Xbee wireless module. It is based on the NEW Maxstream Series 2 XBee™ ZigBee OEM RF Module that can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options.

For wireless communication, a second RF module is required.

Note: unit includes a Series 2 XBee module, however the radio is removable, so any XBee module will work with the shield.

€47.20

Arduino Mini USB Extension

Mon, 06 Feb 2012 09:23:19 +0000

Arduino Mini USB Extension is a USB to serial converter than can be used with Arduino Mini.

€15.73

Arduino USB Extension Light

Mon, 06 Feb 2012 09:23:19 +0000

Arduino Mini USB Extension Light is a USB to serial converter (without downside connectors) than can be used with Arduino Mini.

€14.52